Merge branch '3.16-fixes' into mips-for-linux-next
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c1b9aa8..ea4f2df 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -566,6 +566,12 @@
possible to determine what the correct size should be.
This option provides an override for these situations.
+ cca= [MIPS] Override the kernel pages' cache coherency
+ algorithm. Accepted values range from 0 to 7
+ inclusive. See arch/mips/include/asm/pgtable-bits.h
+ for platform specific values (SB1, Loongson3 and
+ others).
+
ccw_timeout_log [S390]
See Documentation/s390/CommonIO for details.
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4e238e6..0d3f935 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -72,6 +72,7 @@
select SYS_SUPPORTS_APM_EMULATION
select ARCH_REQUIRE_GPIOLIB
select SYS_SUPPORTS_ZBOOT
+ select COMMON_CLK
config AR7
bool "Texas Instruments AR7"
@@ -130,6 +131,8 @@
select SYS_SUPPORTS_MIPS16
select SYS_HAS_EARLY_PRINTK
select USE_GENERIC_EARLY_PRINTK_8250
+ select GPIOLIB
+ select LEDS_GPIO_REGISTER
help
Support for BCM47XX based boards
@@ -138,6 +141,7 @@
select BOOT_RAW
select CEVT_R4K
select CSRC_R4K
+ select SYNC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select SYS_SUPPORTS_32BIT_KERNEL
@@ -2057,6 +2061,7 @@
support is unavailable.
config MIPS_CPS_PM
+ select MIPS_CPC
bool
config MIPS_GIC_IPI
@@ -2110,9 +2115,9 @@
microMIPS ISA
config CPU_HAS_MSA
- bool "Support for the MIPS SIMD Architecture"
+ bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)"
depends on CPU_SUPPORTS_MSA
- default y
+ depends on 64BIT || MIPS_O32_FP64_SUPPORT
help
MIPS SIMD Architecture (MSA) introduces 128 bit wide vector registers
and a set of SIMD instructions to operate on them. When this option
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index a8521de..9336509 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -151,8 +151,10 @@
-Wa,--trap
cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \
-Wa,--trap
-cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1 -mno-mdmx -mno-mips3d,-march=r5000) \
+cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \
-Wa,--trap
+cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mdmx)
+cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mips3d)
cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap
cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \
-Wa,--trap
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 25a59a2..1e3b102 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -85,10 +85,10 @@
#endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */
/* Initialize sys_pinfunc */
- au_writel(SYS_PF_NI2, SYS_PINFUNC);
+ alchemy_wrsys(SYS_PF_NI2, AU1000_SYS_PINFUNC);
/* Initialize GPIO */
- au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
+ alchemy_wrsys(~0, AU1000_SYS_TRIOUTCLR);
alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
index 3fb814b..0fc53e0 100644
--- a/arch/mips/alchemy/board-xxs1500.c
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -87,9 +87,9 @@
alchemy_gpio2_enable();
/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
- pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
+ pin_func = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;
- au_writel(pin_func, SYS_PINFUNC);
+ alchemy_wrsys(pin_func, AU1000_SYS_PINFUNC);
/* Enable UART */
alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index cb83d8d..f64744f 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -5,8 +5,8 @@
# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
-obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
- sleeper.o dma.o dbdma.o vss.o irq.o usb.o
+obj-y += prom.o time.o clock.o platform.o power.o \
+ setup.o sleeper.o dma.o dbdma.o vss.o irq.o usb.o
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c
new file mode 100644
index 0000000..d7557cd
--- /dev/null
+++ b/arch/mips/alchemy/common/clock.c
@@ -0,0 +1,1094 @@
+/*
+ * Alchemy clocks.
+ *
+ * Exposes all configurable internal clock sources to the clk framework.
+ *
+ * We have:
+ * - Root source, usually 12MHz supplied by an external crystal
+ * - 3 PLLs which generate multiples of root rate [AUX, CPU, AUX2]
+ *
+ * Dividers:
+ * - 6 clock dividers with:
+ * * selectable source [one of the PLLs],
+ * * output divided between [2 .. 512 in steps of 2] (!Au1300)
+ * or [1 .. 256 in steps of 1] (Au1300),
+ * * can be enabled individually.
+ *
+ * - up to 6 "internal" (fixed) consumers which:
+ * * take either AUXPLL or one of the above 6 dividers as input,
+ * * divide this input by 1, 2, or 4 (and 3 on Au1300).
+ * * can be disabled separately.
+ *
+ * Misc clocks:
+ * - sysbus clock: CPU core clock (CPUPLL) divided by 2, 3 or 4.
+ * depends on board design and should be set by bootloader, read-only.
+ * - peripheral clock: half the rate of sysbus clock, source for a lot
+ * of peripheral blocks, read-only.
+ * - memory clock: clk rate to main memory chips, depends on board
+ * design and is read-only,
+ * - lrclk: the static bus clock signal for synchronous operation.
+ * depends on board design, must be set by bootloader,
+ * but may be required to correctly configure devices attached to
+ * the static bus. The Au1000/1500/1100 manuals call it LCLK, on
+ * later models it's called RCLK.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk-private.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* Base clock: 12MHz is the default in all databooks, and I haven't
+ * found any board yet which uses a different rate.
+ */
+#define ALCHEMY_ROOTCLK_RATE 12000000
+
+/*
+ * the internal sources which can be driven by the PLLs and dividers.
+ * Names taken from the databooks, refer to them for more information,
+ * especially which ones are share a clock line.
+ */
+static const char * const alchemy_au1300_intclknames[] = {
+ "lcd_intclk", "gpemgp_clk", "maempe_clk", "maebsa_clk",
+ "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1200_intclknames[] = {
+ "lcd_intclk", NULL, NULL, NULL, "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1550_intclknames[] = {
+ "usb_clk", "psc0_intclk", "psc1_intclk", "pci_clko",
+ "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1100_intclknames[] = {
+ "usb_clk", "lcd_intclk", NULL, "i2s_clk", "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1500_intclknames[] = {
+ NULL, "usbd_clk", "usbh_clk", "pci_clko", "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1000_intclknames[] = {
+ "irda_clk", "usbd_clk", "usbh_clk", "i2s_clk", "EXTCLK0",
+ "EXTCLK1"
+};
+
+/* aliases for a few on-chip sources which are either shared
+ * or have gone through name changes.
+ */
+static struct clk_aliastable {
+ char *alias;
+ char *base;
+ int cputype;
+} alchemy_clk_aliases[] __initdata = {
+ { "usbh_clk", "usb_clk", ALCHEMY_CPU_AU1100 },
+ { "usbd_clk", "usb_clk", ALCHEMY_CPU_AU1100 },
+ { "irda_clk", "usb_clk", ALCHEMY_CPU_AU1100 },
+ { "usbh_clk", "usb_clk", ALCHEMY_CPU_AU1550 },
+ { "usbd_clk", "usb_clk", ALCHEMY_CPU_AU1550 },
+ { "psc2_intclk", "usb_clk", ALCHEMY_CPU_AU1550 },
+ { "psc3_intclk", "EXTCLK0", ALCHEMY_CPU_AU1550 },
+ { "psc0_intclk", "EXTCLK0", ALCHEMY_CPU_AU1200 },
+ { "psc1_intclk", "EXTCLK1", ALCHEMY_CPU_AU1200 },
+ { "psc0_intclk", "EXTCLK0", ALCHEMY_CPU_AU1300 },
+ { "psc2_intclk", "EXTCLK0", ALCHEMY_CPU_AU1300 },
+ { "psc1_intclk", "EXTCLK1", ALCHEMY_CPU_AU1300 },
+ { "psc3_intclk", "EXTCLK1", ALCHEMY_CPU_AU1300 },
+
+ { NULL, NULL, 0 },
+};
+
+#define IOMEM(x) ((void __iomem *)(KSEG1ADDR(CPHYSADDR(x))))
+
+/* access locks to SYS_FREQCTRL0/1 and SYS_CLKSRC registers */
+static spinlock_t alchemy_clk_fg0_lock;
+static spinlock_t alchemy_clk_fg1_lock;
+static spinlock_t alchemy_clk_csrc_lock;
+
+/* CPU Core clock *****************************************************/
+
+static unsigned long alchemy_clk_cpu_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned long t;
+
+ /*
+ * On early Au1000, sys_cpupll was write-only. Since these
+ * silicon versions of Au1000 are not sold, we don't bend
+ * over backwards trying to determine the frequency.
+ */
+ if (unlikely(au1xxx_cpu_has_pll_wo()))
+ t = 396000000;
+ else {
+ t = alchemy_rdsys(AU1000_SYS_CPUPLL) & 0x7f;
+ t *= parent_rate;
+ }
+
+ return t;
+}
+
+static struct clk_ops alchemy_clkops_cpu = {
+ .recalc_rate = alchemy_clk_cpu_recalc,
+};
+
+static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name,
+ int ctype)
+{
+ struct clk_init_data id;
+ struct clk_hw *h;
+
+ h = kzalloc(sizeof(*h), GFP_KERNEL);
+ if (!h)
+ return ERR_PTR(-ENOMEM);
+
+ id.name = ALCHEMY_CPU_CLK;
+ id.parent_names = &parent_name;
+ id.num_parents = 1;
+ id.flags = CLK_IS_BASIC;
+ id.ops = &alchemy_clkops_cpu;
+ h->init = &id;
+
+ return clk_register(NULL, h);
+}
+
+/* AUXPLLs ************************************************************/
+
+struct alchemy_auxpll_clk {
+ struct clk_hw hw;
+ unsigned long reg; /* au1300 has also AUXPLL2 */
+ int maxmult; /* max multiplier */
+};
+#define to_auxpll_clk(x) container_of(x, struct alchemy_auxpll_clk, hw)
+
+static unsigned long alchemy_clk_aux_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+
+ return (alchemy_rdsys(a->reg) & 0xff) * parent_rate;
+}
+
+static int alchemy_clk_aux_setr(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+ unsigned long d = rate;
+
+ if (rate)
+ d /= parent_rate;
+ else
+ d = 0;
+
+ /* minimum is 84MHz, max is 756-1032 depending on variant */
+ if (((d < 7) && (d != 0)) || (d > a->maxmult))
+ return -EINVAL;
+
+ alchemy_wrsys(d, a->reg);
+ return 0;
+}
+
+static long alchemy_clk_aux_roundr(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+ unsigned long mult;
+
+ if (!rate || !*parent_rate)
+ return 0;
+
+ mult = rate / (*parent_rate);
+
+ if (mult && (mult < 7))
+ mult = 7;
+ if (mult > a->maxmult)
+ mult = a->maxmult;
+
+ return (*parent_rate) * mult;
+}
+
+static struct clk_ops alchemy_clkops_aux = {
+ .recalc_rate = alchemy_clk_aux_recalc,
+ .set_rate = alchemy_clk_aux_setr,
+ .round_rate = alchemy_clk_aux_roundr,
+};
+
+static struct clk __init *alchemy_clk_setup_aux(const char *parent_name,
+ char *name, int maxmult,
+ unsigned long reg)
+{
+ struct clk_init_data id;
+ struct clk *c;
+ struct alchemy_auxpll_clk *a;
+
+ a = kzalloc(sizeof(*a), GFP_KERNEL);
+ if (!a)
+ return ERR_PTR(-ENOMEM);
+
+ id.name = name;
+ id.parent_names = &parent_name;
+ id.num_parents = 1;
+ id.flags = CLK_GET_RATE_NOCACHE;
+ id.ops = &alchemy_clkops_aux;
+
+ a->reg = reg;
+ a->maxmult = maxmult;
+ a->hw.init = &id;
+
+ c = clk_register(NULL, &a->hw);
+ if (!IS_ERR(c))
+ clk_register_clkdev(c, name, NULL);
+ else
+ kfree(a);
+
+ return c;
+}
+
+/* sysbus_clk *********************************************************/
+
+static struct clk __init *alchemy_clk_setup_sysbus(const char *pn)
+{
+ unsigned long v = (alchemy_rdsys(AU1000_SYS_POWERCTRL) & 3) + 2;
+ struct clk *c;
+
+ c = clk_register_fixed_factor(NULL, ALCHEMY_SYSBUS_CLK,
+ pn, 0, 1, v);
+ if (!IS_ERR(c))
+ clk_register_clkdev(c, ALCHEMY_SYSBUS_CLK, NULL);
+ return c;
+}
+
+/* Peripheral Clock ***************************************************/
+
+static struct clk __init *alchemy_clk_setup_periph(const char *pn)
+{
+ /* Peripheral clock runs at half the rate of sysbus clk */
+ struct clk *c;
+
+ c = clk_register_fixed_factor(NULL, ALCHEMY_PERIPH_CLK,
+ pn, 0, 1, 2);
+ if (!IS_ERR(c))
+ clk_register_clkdev(c, ALCHEMY_PERIPH_CLK, NULL);
+ return c;
+}
+
+/* mem clock **********************************************************/
+
+static struct clk __init *alchemy_clk_setup_mem(const char *pn, int ct)
+{
+ void __iomem *addr = IOMEM(AU1000_MEM_PHYS_ADDR);
+ unsigned long v;
+ struct clk *c;
+ int div;
+
+ switch (ct) {
+ case ALCHEMY_CPU_AU1550:
+ case ALCHEMY_CPU_AU1200:
+ v = __raw_readl(addr + AU1550_MEM_SDCONFIGB);
+ div = (v & (1 << 15)) ? 1 : 2;
+ break;
+ case ALCHEMY_CPU_AU1300:
+ v = __raw_readl(addr + AU1550_MEM_SDCONFIGB);
+ div = (v & (1 << 31)) ? 1 : 2;
+ break;
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ default:
+ div = 2;
+ break;
+ }
+
+ c = clk_register_fixed_factor(NULL, ALCHEMY_MEM_CLK, pn,
+ 0, 1, div);
+ if (!IS_ERR(c))
+ clk_register_clkdev(c, ALCHEMY_MEM_CLK, NULL);
+ return c;
+}
+
+/* lrclk: external synchronous static bus clock ***********************/
+
+static struct clk __init *alchemy_clk_setup_lrclk(const char *pn)
+{
+ /* MEM_STCFG0[15:13] = divisor.
+ * L/RCLK = periph_clk / (divisor + 1)
+ * On Au1000, Au1500, Au1100 it's called LCLK,
+ * on later models it's called RCLK, but it's the same thing.
+ */
+ struct clk *c;
+ unsigned long v = alchemy_rdsmem(AU1000_MEM_STCFG0) >> 13;
+
+ v = (v & 7) + 1;
+ c = clk_register_fixed_factor(NULL, ALCHEMY_LR_CLK,
+ pn, 0, 1, v);
+ if (!IS_ERR(c))
+ clk_register_clkdev(c, ALCHEMY_LR_CLK, NULL);
+ return c;
+}
+
+/* Clock dividers and muxes *******************************************/
+
+/* data for fgen and csrc mux-dividers */
+struct alchemy_fgcs_clk {
+ struct clk_hw hw;
+ spinlock_t *reglock; /* register lock */
+ unsigned long reg; /* SYS_FREQCTRL0/1 */
+ int shift; /* offset in register */
+ int parent; /* parent before disable [Au1300] */
+ int isen; /* is it enabled? */
+ int *dt; /* dividertable for csrc */
+};
+#define to_fgcs_clk(x) container_of(x, struct alchemy_fgcs_clk, hw)
+
+static long alchemy_calc_div(unsigned long rate, unsigned long prate,
+ int scale, int maxdiv, unsigned long *rv)
+{
+ long div1, div2;
+
+ div1 = prate / rate;
+ if ((prate / div1) > rate)
+ div1++;
+
+ if (scale == 2) { /* only div-by-multiple-of-2 possible */
+ if (div1 & 1)
+ div1++; /* stay <=prate */
+ }
+
+ div2 = (div1 / scale) - 1; /* value to write to register */
+
+ if (div2 > maxdiv)
+ div2 = maxdiv;
+ if (rv)
+ *rv = div2;
+
+ div1 = ((div2 + 1) * scale);
+ return div1;
+}
+
+static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk,
+ int scale, int maxdiv)
+{
+ struct clk *pc, *bpc, *free;
+ long tdv, tpr, pr, nr, br, bpr, diff, lastdiff;
+ int j;
+
+ lastdiff = INT_MAX;
+ bpr = 0;
+ bpc = NULL;
+ br = -EINVAL;
+ free = NULL;
+
+ /* look at the rates each enabled parent supplies and select
+ * the one that gets closest to but not over the requested rate.
+ */
+ for (j = 0; j < 7; j++) {
+ pc = clk_get_parent_by_index(hw->clk, j);
+ if (!pc)
+ break;
+
+ /* if this parent is currently unused, remember it.
+ * XXX: I know it's a layering violation, but it works
+ * so well.. (if (!clk_has_active_children(pc)) )
+ */
+ if (pc->prepare_count == 0) {
+ if (!free)
+ free = pc;
+ }
+
+ pr = clk_get_rate(pc);
+ if (pr < rate)
+ continue;
+
+ /* what can hardware actually provide */
+ tdv = alchemy_calc_div(rate, pr, scale, maxdiv, NULL);
+ nr = pr / tdv;
+ diff = rate - nr;
+ if (nr > rate)
+ continue;
+
+ if (diff < lastdiff) {
+ lastdiff = diff;
+ bpr = pr;
+ bpc = pc;
+ br = nr;
+ }
+ if (diff == 0)
+ break;
+ }
+
+ /* if we couldn't get the exact rate we wanted from the enabled
+ * parents, maybe we can tell an available disabled/inactive one
+ * to give us a rate we can divide down to the requested rate.
+ */
+ if (lastdiff && free) {
+ for (j = (maxdiv == 4) ? 1 : scale; j <= maxdiv; j += scale) {
+ tpr = rate * j;
+ if (tpr < 0)
+ break;
+ pr = clk_round_rate(free, tpr);
+
+ tdv = alchemy_calc_div(rate, pr, scale, maxdiv, NULL);
+ nr = pr / tdv;
+ diff = rate - nr;
+ if (nr > rate)
+ continue;
+ if (diff < lastdiff) {
+ lastdiff = diff;
+ bpr = pr;
+ bpc = free;
+ br = nr;
+ }
+ if (diff == 0)
+ break;
+ }
+ }
+
+ *best_parent_rate = bpr;
+ *best_parent_clk = bpc;
+ return br;
+}
+
+static int alchemy_clk_fgv1_en(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v, flags;
+
+ spin_lock_irqsave(c->reglock, flags);
+ v = alchemy_rdsys(c->reg);
+ v |= (1 << 1) << c->shift;
+ alchemy_wrsys(v, c->reg);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static int alchemy_clk_fgv1_isen(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v = alchemy_rdsys(c->reg) >> (c->shift + 1);
+
+ return v & 1;
+}
+
+static void alchemy_clk_fgv1_dis(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v, flags;
+
+ spin_lock_irqsave(c->reglock, flags);
+ v = alchemy_rdsys(c->reg);
+ v &= ~((1 << 1) << c->shift);
+ alchemy_wrsys(v, c->reg);
+ spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_fgv1_setp(struct clk_hw *hw, u8 index)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v, flags;
+
+ spin_lock_irqsave(c->reglock, flags);
+ v = alchemy_rdsys(c->reg);
+ if (index)
+ v |= (1 << c->shift);
+ else
+ v &= ~(1 << c->shift);
+ alchemy_wrsys(v, c->reg);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static u8 alchemy_clk_fgv1_getp(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+ return (alchemy_rdsys(c->reg) >> c->shift) & 1;
+}
+
+static int alchemy_clk_fgv1_setr(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long div, v, flags, ret;
+ int sh = c->shift + 2;
+
+ if (!rate || !parent_rate || rate > (parent_rate / 2))
+ return -EINVAL;
+ ret = alchemy_calc_div(rate, parent_rate, 2, 512, &div);
+ spin_lock_irqsave(c->reglock, flags);
+ v = alchemy_rdsys(c->reg);
+ v &= ~(0xff << sh);
+ v |= div << sh;
+ alchemy_wrsys(v, c->reg);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static unsigned long alchemy_clk_fgv1_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v = alchemy_rdsys(c->reg) >> (c->shift + 2);
+
+ v = ((v & 0xff) + 1) * 2;
+ return parent_rate / v;
+}
+
+static long alchemy_clk_fgv1_detr(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk)
+{
+ return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
+ best_parent_clk, 2, 512);
+}
+
+/* Au1000, Au1100, Au15x0, Au12x0 */
+static struct clk_ops alchemy_clkops_fgenv1 = {
+ .recalc_rate = alchemy_clk_fgv1_recalc,
+ .determine_rate = alchemy_clk_fgv1_detr,
+ .set_rate = alchemy_clk_fgv1_setr,
+ .set_parent = alchemy_clk_fgv1_setp,
+ .get_parent = alchemy_clk_fgv1_getp,
+ .enable = alchemy_clk_fgv1_en,
+ .disable = alchemy_clk_fgv1_dis,
+ .is_enabled = alchemy_clk_fgv1_isen,
+};
+
+static void __alchemy_clk_fgv2_en(struct alchemy_fgcs_clk *c)
+{
+ unsigned long v = alchemy_rdsys(c->reg);
+
+ v &= ~(3 << c->shift);
+ v |= (c->parent & 3) << c->shift;
+ alchemy_wrsys(v, c->reg);
+ c->isen = 1;
+}
+
+static int alchemy_clk_fgv2_en(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long flags;
+
+ /* enable by setting the previous parent clock */
+ spin_lock_irqsave(c->reglock, flags);
+ __alchemy_clk_fgv2_en(c);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static int alchemy_clk_fgv2_isen(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+ return ((alchemy_rdsys(c->reg) >> c->shift) & 3) != 0;
+}
+
+static void alchemy_clk_fgv2_dis(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v, flags;
+
+ spin_lock_irqsave(c->reglock, flags);
+ v = alchemy_rdsys(c->reg);
+ v &= ~(3 << c->shift); /* set input mux to "disabled" state */
+ alchemy_wrsys(v, c->reg);
+ c->isen = 0;
+ spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_fgv2_setp(struct clk_hw *hw, u8 index)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long flags;
+
+ spin_lock_irqsave(c->reglock, flags);
+ c->parent = index + 1; /* value to write to register */
+ if (c->isen)
+ __alchemy_clk_fgv2_en(c);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static u8 alchemy_clk_fgv2_getp(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long flags, v;
+
+ spin_lock_irqsave(c->reglock, flags);
+ v = c->parent - 1;
+ spin_unlock_irqrestore(c->reglock, flags);
+ return v;
+}
+
+/* fg0-2 and fg4-6 share a "scale"-bit. With this bit cleared, the
+ * dividers behave exactly as on previous models (dividers are multiples
+ * of 2); with the bit set, dividers are multiples of 1, halving their
+ * range, but making them also much more flexible.
+ */
+static int alchemy_clk_fgv2_setr(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ int sh = c->shift + 2;
+ unsigned long div, v, flags, ret;
+
+ if (!rate || !parent_rate || rate > parent_rate)
+ return -EINVAL;
+
+ v = alchemy_rdsys(c->reg) & (1 << 30); /* test "scale" bit */
+ ret = alchemy_calc_div(rate, parent_rate, v ? 1 : 2,
+ v ? 256 : 512, &div);
+
+ spin_lock_irqsave(c->reglock, flags);
+ v = alchemy_rdsys(c->reg);
+ v &= ~(0xff << sh);
+ v |= (div & 0xff) << sh;
+ alchemy_wrsys(v, c->reg);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static unsigned long alchemy_clk_fgv2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ int sh = c->shift + 2;
+ unsigned long v, t;
+
+ v = alchemy_rdsys(c->reg);
+ t = parent_rate / (((v >> sh) & 0xff) + 1);
+ if ((v & (1 << 30)) == 0) /* test scale bit */
+ t /= 2;
+
+ return t;
+}
+
+static long alchemy_clk_fgv2_detr(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ int scale, maxdiv;
+
+ if (alchemy_rdsys(c->reg) & (1 << 30)) {
+ scale = 1;
+ maxdiv = 256;
+ } else {
+ scale = 2;
+ maxdiv = 512;
+ }
+
+ return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
+ best_parent_clk, scale, maxdiv);
+}
+
+/* Au1300 larger input mux, no separate disable bit, flexible divider */
+static struct clk_ops alchemy_clkops_fgenv2 = {
+ .recalc_rate = alchemy_clk_fgv2_recalc,
+ .determine_rate = alchemy_clk_fgv2_detr,
+ .set_rate = alchemy_clk_fgv2_setr,
+ .set_parent = alchemy_clk_fgv2_setp,
+ .get_parent = alchemy_clk_fgv2_getp,
+ .enable = alchemy_clk_fgv2_en,
+ .disable = alchemy_clk_fgv2_dis,
+ .is_enabled = alchemy_clk_fgv2_isen,
+};
+
+static const char * const alchemy_clk_fgv1_parents[] = {
+ ALCHEMY_CPU_CLK, ALCHEMY_AUXPLL_CLK
+};
+
+static const char * const alchemy_clk_fgv2_parents[] = {
+ ALCHEMY_AUXPLL2_CLK, ALCHEMY_CPU_CLK, ALCHEMY_AUXPLL_CLK
+};
+
+static const char * const alchemy_clk_fgen_names[] = {
+ ALCHEMY_FG0_CLK, ALCHEMY_FG1_CLK, ALCHEMY_FG2_CLK,
+ ALCHEMY_FG3_CLK, ALCHEMY_FG4_CLK, ALCHEMY_FG5_CLK };
+
+static int __init alchemy_clk_init_fgens(int ctype)
+{
+ struct clk *c;
+ struct clk_init_data id;
+ struct alchemy_fgcs_clk *a;
+ unsigned long v;
+ int i, ret;
+
+ switch (ctype) {
+ case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+ id.ops = &alchemy_clkops_fgenv1;
+ id.parent_names = (const char **)alchemy_clk_fgv1_parents;
+ id.num_parents = 2;
+ break;
+ case ALCHEMY_CPU_AU1300:
+ id.ops = &alchemy_clkops_fgenv2;
+ id.parent_names = (const char **)alchemy_clk_fgv2_parents;
+ id.num_parents = 3;
+ break;
+ default:
+ return -ENODEV;
+ }
+ id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
+
+ a = kzalloc((sizeof(*a)) * 6, GFP_KERNEL);
+ if (!a)
+ return -ENOMEM;
+
+ spin_lock_init(&alchemy_clk_fg0_lock);
+ spin_lock_init(&alchemy_clk_fg1_lock);
+ ret = 0;
+ for (i = 0; i < 6; i++) {
+ id.name = alchemy_clk_fgen_names[i];
+ a->shift = 10 * (i < 3 ? i : i - 3);
+ if (i > 2) {
+ a->reg = AU1000_SYS_FREQCTRL1;
+ a->reglock = &alchemy_clk_fg1_lock;
+ } else {
+ a->reg = AU1000_SYS_FREQCTRL0;
+ a->reglock = &alchemy_clk_fg0_lock;
+ }
+
+ /* default to first parent if bootloader has set
+ * the mux to disabled state.
+ */
+ if (ctype == ALCHEMY_CPU_AU1300) {
+ v = alchemy_rdsys(a->reg);
+ a->parent = (v >> a->shift) & 3;
+ if (!a->parent) {
+ a->parent = 1;
+ a->isen = 0;
+ } else
+ a->isen = 1;
+ }
+
+ a->hw.init = &id;
+ c = clk_register(NULL, &a->hw);
+ if (IS_ERR(c))
+ ret++;
+ else
+ clk_register_clkdev(c, id.name, NULL);
+ a++;
+ }
+
+ return ret;
+}
+
+/* internal sources muxes *********************************************/
+
+static int alchemy_clk_csrc_isen(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v = alchemy_rdsys(c->reg);
+
+ return (((v >> c->shift) >> 2) & 7) != 0;
+}
+
+static void __alchemy_clk_csrc_en(struct alchemy_fgcs_clk *c)
+{
+ unsigned long v = alchemy_rdsys(c->reg);
+
+ v &= ~((7 << 2) << c->shift);
+ v |= ((c->parent & 7) << 2) << c->shift;
+ alchemy_wrsys(v, c->reg);
+ c->isen = 1;
+}
+
+static int alchemy_clk_csrc_en(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long flags;
+
+ /* enable by setting the previous parent clock */
+ spin_lock_irqsave(c->reglock, flags);
+ __alchemy_clk_csrc_en(c);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static void alchemy_clk_csrc_dis(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v, flags;
+
+ spin_lock_irqsave(c->reglock, flags);
+ v = alchemy_rdsys(c->reg);
+ v &= ~((3 << 2) << c->shift); /* mux to "disabled" state */
+ alchemy_wrsys(v, c->reg);
+ c->isen = 0;
+ spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_csrc_setp(struct clk_hw *hw, u8 index)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long flags;
+
+ spin_lock_irqsave(c->reglock, flags);
+ c->parent = index + 1; /* value to write to register */
+ if (c->isen)
+ __alchemy_clk_csrc_en(c);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static u8 alchemy_clk_csrc_getp(struct clk_hw *hw)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+ return c->parent - 1;
+}
+
+static unsigned long alchemy_clk_csrc_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long v = (alchemy_rdsys(c->reg) >> c->shift) & 3;
+
+ return parent_rate / c->dt[v];
+}
+
+static int alchemy_clk_csrc_setr(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ unsigned long d, v, flags;
+ int i;
+
+ if (!rate || !parent_rate || rate > parent_rate)
+ return -EINVAL;
+
+ d = (parent_rate + (rate / 2)) / rate;
+ if (d > 4)
+ return -EINVAL;
+ if ((d == 3) && (c->dt[2] != 3))
+ d = 4;
+
+ for (i = 0; i < 4; i++)
+ if (c->dt[i] == d)
+ break;
+
+ if (i >= 4)
+ return -EINVAL; /* oops */
+
+ spin_lock_irqsave(c->reglock, flags);
+ v = alchemy_rdsys(c->reg);
+ v &= ~(3 << c->shift);
+ v |= (i & 3) << c->shift;
+ alchemy_wrsys(v, c->reg);
+ spin_unlock_irqrestore(c->reglock, flags);
+
+ return 0;
+}
+
+static long alchemy_clk_csrc_detr(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk)
+{
+ struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+ int scale = c->dt[2] == 3 ? 1 : 2; /* au1300 check */
+
+ return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
+ best_parent_clk, scale, 4);
+}
+
+static struct clk_ops alchemy_clkops_csrc = {
+ .recalc_rate = alchemy_clk_csrc_recalc,
+ .determine_rate = alchemy_clk_csrc_detr,
+ .set_rate = alchemy_clk_csrc_setr,
+ .set_parent = alchemy_clk_csrc_setp,
+ .get_parent = alchemy_clk_csrc_getp,
+ .enable = alchemy_clk_csrc_en,
+ .disable = alchemy_clk_csrc_dis,
+ .is_enabled = alchemy_clk_csrc_isen,
+};
+
+static const char * const alchemy_clk_csrc_parents[] = {
+ /* disabled at index 0 */ ALCHEMY_AUXPLL_CLK,
+ ALCHEMY_FG0_CLK, ALCHEMY_FG1_CLK, ALCHEMY_FG2_CLK,
+ ALCHEMY_FG3_CLK, ALCHEMY_FG4_CLK, ALCHEMY_FG5_CLK
+};
+
+/* divider tables */
+static int alchemy_csrc_dt1[] = { 1, 4, 1, 2 }; /* rest */
+static int alchemy_csrc_dt2[] = { 1, 4, 3, 2 }; /* Au1300 */
+
+static int __init alchemy_clk_setup_imux(int ctype)
+{
+ struct alchemy_fgcs_clk *a;
+ const char * const *names;
+ struct clk_init_data id;
+ unsigned long v;
+ int i, ret, *dt;
+ struct clk *c;
+
+ id.ops = &alchemy_clkops_csrc;
+ id.parent_names = (const char **)alchemy_clk_csrc_parents;
+ id.num_parents = 7;
+ id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
+
+ dt = alchemy_csrc_dt1;
+ switch (ctype) {
+ case ALCHEMY_CPU_AU1000:
+ names = alchemy_au1000_intclknames;
+ break;
+ case ALCHEMY_CPU_AU1500:
+ names = alchemy_au1500_intclknames;
+ break;
+ case ALCHEMY_CPU_AU1100:
+ names = alchemy_au1100_intclknames;
+ break;
+ case ALCHEMY_CPU_AU1550:
+ names = alchemy_au1550_intclknames;
+ break;
+ case ALCHEMY_CPU_AU1200:
+ names = alchemy_au1200_intclknames;
+ break;
+ case ALCHEMY_CPU_AU1300:
+ dt = alchemy_csrc_dt2;
+ names = alchemy_au1300_intclknames;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ a = kzalloc((sizeof(*a)) * 6, GFP_KERNEL);
+ if (!a)
+ return -ENOMEM;
+
+ spin_lock_init(&alchemy_clk_csrc_lock);
+ ret = 0;
+
+ for (i = 0; i < 6; i++) {
+ id.name = names[i];
+ if (!id.name)
+ goto next;
+
+ a->shift = i * 5;
+ a->reg = AU1000_SYS_CLKSRC;
+ a->reglock = &alchemy_clk_csrc_lock;
+ a->dt = dt;
+
+ /* default to first parent clock if mux is initially
+ * set to disabled state.
+ */
+ v = alchemy_rdsys(a->reg);
+ a->parent = ((v >> a->shift) >> 2) & 7;
+ if (!a->parent) {
+ a->parent = 1;
+ a->isen = 0;
+ } else
+ a->isen = 1;
+
+ a->hw.init = &id;
+ c = clk_register(NULL, &a->hw);
+ if (IS_ERR(c))
+ ret++;
+ else
+ clk_register_clkdev(c, id.name, NULL);
+next:
+ a++;
+ }
+
+ return ret;
+}
+
+
+/**********************************************************************/
+
+
+#define ERRCK(x) \
+ if (IS_ERR(x)) { \
+ ret = PTR_ERR(x); \
+ goto out; \
+ }
+
+static int __init alchemy_clk_init(void)
+{
+ int ctype = alchemy_get_cputype(), ret, i;
+ struct clk_aliastable *t = alchemy_clk_aliases;
+ struct clk *c;
+
+ /* Root of the Alchemy clock tree: external 12MHz crystal osc */
+ c = clk_register_fixed_rate(NULL, ALCHEMY_ROOT_CLK, NULL,
+ CLK_IS_ROOT,
+ ALCHEMY_ROOTCLK_RATE);
+ ERRCK(c)
+
+ /* CPU core clock */
+ c = alchemy_clk_setup_cpu(ALCHEMY_ROOT_CLK, ctype);
+ ERRCK(c)
+
+ /* AUXPLLs: max 1GHz on Au1300, 748MHz on older models */
+ i = (ctype == ALCHEMY_CPU_AU1300) ? 84 : 63;
+ c = alchemy_clk_setup_aux(ALCHEMY_ROOT_CLK, ALCHEMY_AUXPLL_CLK,
+ i, AU1000_SYS_AUXPLL);
+ ERRCK(c)
+
+ if (ctype == ALCHEMY_CPU_AU1300) {
+ c = alchemy_clk_setup_aux(ALCHEMY_ROOT_CLK,
+ ALCHEMY_AUXPLL2_CLK, i,
+ AU1300_SYS_AUXPLL2);
+ ERRCK(c)
+ }
+
+ /* sysbus clock: cpu core clock divided by 2, 3 or 4 */
+ c = alchemy_clk_setup_sysbus(ALCHEMY_CPU_CLK);
+ ERRCK(c)
+
+ /* peripheral clock: runs at half rate of sysbus clk */
+ c = alchemy_clk_setup_periph(ALCHEMY_SYSBUS_CLK);
+ ERRCK(c)
+
+ /* SDR/DDR memory clock */
+ c = alchemy_clk_setup_mem(ALCHEMY_SYSBUS_CLK, ctype);
+ ERRCK(c)
+
+ /* L/RCLK: external static bus clock for synchronous mode */
+ c = alchemy_clk_setup_lrclk(ALCHEMY_PERIPH_CLK);
+ ERRCK(c)
+
+ /* Frequency dividers 0-5 */
+ ret = alchemy_clk_init_fgens(ctype);
+ if (ret) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* diving muxes for internal sources */
+ ret = alchemy_clk_setup_imux(ctype);
+ if (ret) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* set up aliases drivers might look for */
+ while (t->base) {
+ if (t->cputype == ctype)
+ clk_add_alias(t->alias, NULL, t->base, NULL);
+ t++;
+ }
+
+ pr_info("Alchemy clocktree installed\n");
+ return 0;
+
+out:
+ return ret;
+}
+postcore_initcall(alchemy_clk_init);
diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
deleted file mode 100644
index f38298a..0000000
--- a/arch/mips/alchemy/common/clocks.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Simple Au1xx0 clocks routines.
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <asm/time.h>
-#include <asm/mach-au1x00/au1000.h>
-
-/*
- * I haven't found anyone that doesn't use a 12 MHz source clock,
- * but just in case.....
- */
-#define AU1000_SRC_CLK 12000000
-
-static unsigned int au1x00_clock; /* Hz */
-static unsigned long uart_baud_base;
-
-/*
- * Set the au1000_clock
- */
-void set_au1x00_speed(unsigned int new_freq)
-{
- au1x00_clock = new_freq;
-}
-
-unsigned int get_au1x00_speed(void)
-{
- return au1x00_clock;
-}
-EXPORT_SYMBOL(get_au1x00_speed);
-
-/*
- * The UART baud base is not known at compile time ... if
- * we want to be able to use the same code on different
- * speed CPUs.
- */
-unsigned long get_au1x00_uart_baud_base(void)
-{
- return uart_baud_base;
-}
-
-void set_au1x00_uart_baud_base(unsigned long new_baud_base)
-{
- uart_baud_base = new_baud_base;
-}
-
-/*
- * We read the real processor speed from the PLL. This is important
- * because it is more accurate than computing it from the 32 KHz
- * counter, if it exists. If we don't have an accurate processor
- * speed, all of the peripherals that derive their clocks based on
- * this advertised speed will introduce error and sometimes not work
- * properly. This function is further convoluted to still allow configurations
- * to do that in case they have really, really old silicon with a
- * write-only PLL register. -- Dan
- */
-unsigned long au1xxx_calc_clock(void)
-{
- unsigned long cpu_speed;
-
- /*
- * On early Au1000, sys_cpupll was write-only. Since these
- * silicon versions of Au1000 are not sold by AMD, we don't bend
- * over backwards trying to determine the frequency.
- */
- if (au1xxx_cpu_has_pll_wo())
- cpu_speed = 396000000;
- else
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
-
- /* On Alchemy CPU:counter ratio is 1:1 */
- mips_hpt_frequency = cpu_speed;
- /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
- set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
- & 0x03) + 2) * 16));
-
- set_au1x00_speed(cpu_speed);
-
- return cpu_speed;
-}
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 19d5642..745695d 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -341,7 +341,7 @@
(dtp->dev_flags & DEV_FLAGS_SYNC))
i |= DDMA_CFG_SYNC;
cp->ddma_cfg = i;
- au_sync();
+ wmb(); /* drain writebuffer */
/*
* Return a non-zero value that can be used to find the channel
@@ -631,7 +631,7 @@
*/
dma_cache_wback_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
- au_sync();
+ wmb(); /* drain writebuffer */
dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
ctp->chan_ptr->ddma_dbell = 0;
@@ -693,7 +693,7 @@
*/
dma_cache_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
- au_sync();
+ wmb(); /* drain writebuffer */
dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
ctp->chan_ptr->ddma_dbell = 0;
@@ -760,7 +760,7 @@
cp = ctp->chan_ptr;
cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */
- au_sync();
+ wmb(); /* drain writebuffer */
while (!(cp->ddma_stat & DDMA_STAT_H)) {
udelay(1);
halt_timeout++;
@@ -771,7 +771,7 @@
}
/* clear current desc valid and doorbell */
cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
- au_sync();
+ wmb(); /* drain writebuffer */
}
EXPORT_SYMBOL(au1xxx_dbdma_stop);
@@ -789,9 +789,9 @@
cp = ctp->chan_ptr;
cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
- au_sync();
+ wmb(); /* drain writebuffer */
cp->ddma_dbell = 0;
- au_sync();
+ wmb(); /* drain writebuffer */
}
EXPORT_SYMBOL(au1xxx_dbdma_start);
@@ -832,7 +832,7 @@
/* This is only valid if the channel is stopped. */
rv = cp->ddma_bytecnt;
- au_sync();
+ wmb(); /* drain writebuffer */
return rv;
}
@@ -868,7 +868,7 @@
au1x_dma_chan_t *cp;
intstat = dbdma_gptr->ddma_intstat;
- au_sync();
+ wmb(); /* drain writebuffer */
chan_index = __ffs(intstat);
ctp = chan_tab_ptr[chan_index];
@@ -877,7 +877,7 @@
/* Reset interrupt. */
cp->ddma_irq = 0;
- au_sync();
+ wmb(); /* drain writebuffer */
if (ctp->chan_callback)
ctp->chan_callback(irq, ctp->chan_callparam);
@@ -1061,7 +1061,7 @@
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
- au_sync();
+ wmb(); /* drain writebuffer */
ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr);
if (ret)
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index 9b624e2..4fb6207 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -141,17 +141,17 @@
printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr);
printk(KERN_INFO " mode = 0x%08x\n",
- au_readl(chan->io + DMA_MODE_SET));
+ __raw_readl(chan->io + DMA_MODE_SET));
printk(KERN_INFO " addr = 0x%08x\n",
- au_readl(chan->io + DMA_PERIPHERAL_ADDR));
+ __raw_readl(chan->io + DMA_PERIPHERAL_ADDR));
printk(KERN_INFO " start0 = 0x%08x\n",
- au_readl(chan->io + DMA_BUFFER0_START));
+ __raw_readl(chan->io + DMA_BUFFER0_START));
printk(KERN_INFO " start1 = 0x%08x\n",
- au_readl(chan->io + DMA_BUFFER1_START));
+ __raw_readl(chan->io + DMA_BUFFER1_START));
printk(KERN_INFO " count0 = 0x%08x\n",
- au_readl(chan->io + DMA_BUFFER0_COUNT));
+ __raw_readl(chan->io + DMA_BUFFER0_COUNT));
printk(KERN_INFO " count1 = 0x%08x\n",
- au_readl(chan->io + DMA_BUFFER1_COUNT));
+ __raw_readl(chan->io + DMA_BUFFER1_COUNT));
}
/*
@@ -204,7 +204,8 @@
}
/* fill it in */
- chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN;
+ chan->io = (void __iomem *)(KSEG1ADDR(AU1000_DMA_PHYS_ADDR) +
+ i * DMA_CHANNEL_LEN);
chan->dev_id = dev_id;
chan->dev_str = dev_str;
chan->fifo_addr = dev->fifo_addr;
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 63a7181..6cb60ab 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -389,13 +389,12 @@
return -EINVAL;
local_irq_save(flags);
- wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK);
+ wakemsk = alchemy_rdsys(AU1000_SYS_WAKEMSK);
if (on)
wakemsk |= 1 << bit;
else
wakemsk &= ~(1 << bit);
- __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK);
- wmb();
+ alchemy_wrsys(wakemsk, AU1000_SYS_WAKEMSK);
local_irq_restore(flags);
return 0;
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 9837a13..d77a64f 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -11,6 +11,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
@@ -99,10 +100,20 @@
static void __init alchemy_setup_uarts(int ctype)
{
- unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+ long uartclk;
int s = sizeof(struct plat_serial8250_port);
int c = alchemy_get_uarts(ctype);
struct plat_serial8250_port *ports;
+ struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK);
+
+ if (IS_ERR(clk))
+ return;
+ if (clk_prepare_enable(clk)) {
+ clk_put(clk);
+ return;
+ }
+ uartclk = clk_get_rate(clk);
+ clk_put(clk);
ports = kzalloc(s * (c + 1), GFP_KERNEL);
if (!ports) {
@@ -420,7 +431,7 @@
memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
/* Register second MAC if enabled in pinfunc */
- if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) {
+ if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) {
ret = platform_device_register(&au1xxx_eth1_device);
if (ret)
printk(KERN_INFO "Alchemy: failed to register MAC1\n");
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index bdb28dee..921ed30 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -54,28 +54,28 @@
static void save_core_regs(void)
{
/* Clocks and PLLs. */
- sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
- sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
- sleep_sys_clocks[2] = au_readl(SYS_CLKSRC);
- sleep_sys_clocks[3] = au_readl(SYS_CPUPLL);
- sleep_sys_clocks[4] = au_readl(SYS_AUXPLL);
+ sleep_sys_clocks[0] = alchemy_rdsys(AU1000_SYS_FREQCTRL0);
+ sleep_sys_clocks[1] = alchemy_rdsys(AU1000_SYS_FREQCTRL1);
+ sleep_sys_clocks[2] = alchemy_rdsys(AU1000_SYS_CLKSRC);
+ sleep_sys_clocks[3] = alchemy_rdsys(AU1000_SYS_CPUPLL);
+ sleep_sys_clocks[4] = alchemy_rdsys(AU1000_SYS_AUXPLL);
/* pin mux config */
- sleep_sys_pinfunc = au_readl(SYS_PINFUNC);
+ sleep_sys_pinfunc = alchemy_rdsys(AU1000_SYS_PINFUNC);
/* Save the static memory controller configuration. */
- sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
- sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
- sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
- sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1);
- sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1);
- sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1);
- sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2);
- sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2);
- sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2);
- sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
- sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
- sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
+ sleep_static_memctlr[0][0] = alchemy_rdsmem(AU1000_MEM_STCFG0);
+ sleep_static_memctlr[0][1] = alchemy_rdsmem(AU1000_MEM_STTIME0);
+ sleep_static_memctlr[0][2] = alchemy_rdsmem(AU1000_MEM_STADDR0);
+ sleep_static_memctlr[1][0] = alchemy_rdsmem(AU1000_MEM_STCFG1);
+ sleep_static_memctlr[1][1] = alchemy_rdsmem(AU1000_MEM_STTIME1);
+ sleep_static_memctlr[1][2] = alchemy_rdsmem(AU1000_MEM_STADDR1);
+ sleep_static_memctlr[2][0] = alchemy_rdsmem(AU1000_MEM_STCFG2);
+ sleep_static_memctlr[2][1] = alchemy_rdsmem(AU1000_MEM_STTIME2);
+ sleep_static_memctlr[2][2] = alchemy_rdsmem(AU1000_MEM_STADDR2);
+ sleep_static_memctlr[3][0] = alchemy_rdsmem(AU1000_MEM_STCFG3);
+ sleep_static_memctlr[3][1] = alchemy_rdsmem(AU1000_MEM_STTIME3);
+ sleep_static_memctlr[3][2] = alchemy_rdsmem(AU1000_MEM_STADDR3);
}
static void restore_core_regs(void)
@@ -85,30 +85,28 @@
* one of those Au1000 with a write-only PLL, where we dont
* have a valid value)
*/
- au_writel(sleep_sys_clocks[0], SYS_FREQCTRL0);
- au_writel(sleep_sys_clocks[1], SYS_FREQCTRL1);
- au_writel(sleep_sys_clocks[2], SYS_CLKSRC);
- au_writel(sleep_sys_clocks[4], SYS_AUXPLL);
+ alchemy_wrsys(sleep_sys_clocks[0], AU1000_SYS_FREQCTRL0);
+ alchemy_wrsys(sleep_sys_clocks[1], AU1000_SYS_FREQCTRL1);
+ alchemy_wrsys(sleep_sys_clocks[2], AU1000_SYS_CLKSRC);
+ alchemy_wrsys(sleep_sys_clocks[4], AU1000_SYS_AUXPLL);
if (!au1xxx_cpu_has_pll_wo())
- au_writel(sleep_sys_clocks[3], SYS_CPUPLL);
- au_sync();
+ alchemy_wrsys(sleep_sys_clocks[3], AU1000_SYS_CPUPLL);
- au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
- au_sync();
+ alchemy_wrsys(sleep_sys_pinfunc, AU1000_SYS_PINFUNC);
/* Restore the static memory controller configuration. */
- au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
- au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
- au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
- au_writel(sleep_static_memctlr[1][0], MEM_STCFG1);
- au_writel(sleep_static_memctlr[1][1], MEM_STTIME1);
- au_writel(sleep_static_memctlr[1][2], MEM_STADDR1);
- au_writel(sleep_static_memctlr[2][0], MEM_STCFG2);
- au_writel(sleep_static_memctlr[2][1], MEM_STTIME2);
- au_writel(sleep_static_memctlr[2][2], MEM_STADDR2);
- au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
- au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
- au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
+ alchemy_wrsmem(sleep_static_memctlr[0][0], AU1000_MEM_STCFG0);
+ alchemy_wrsmem(sleep_static_memctlr[0][1], AU1000_MEM_STTIME0);
+ alchemy_wrsmem(sleep_static_memctlr[0][2], AU1000_MEM_STADDR0);
+ alchemy_wrsmem(sleep_static_memctlr[1][0], AU1000_MEM_STCFG1);
+ alchemy_wrsmem(sleep_static_memctlr[1][1], AU1000_MEM_STTIME1);
+ alchemy_wrsmem(sleep_static_memctlr[1][2], AU1000_MEM_STADDR1);
+ alchemy_wrsmem(sleep_static_memctlr[2][0], AU1000_MEM_STCFG2);
+ alchemy_wrsmem(sleep_static_memctlr[2][1], AU1000_MEM_STTIME2);
+ alchemy_wrsmem(sleep_static_memctlr[2][2], AU1000_MEM_STADDR2);
+ alchemy_wrsmem(sleep_static_memctlr[3][0], AU1000_MEM_STCFG3);
+ alchemy_wrsmem(sleep_static_memctlr[3][1], AU1000_MEM_STTIME3);
+ alchemy_wrsmem(sleep_static_memctlr[3][2], AU1000_MEM_STADDR3);
}
void au_sleep(void)
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 8267e3c..ea8f418 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -27,12 +27,9 @@
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/jiffies.h>
-#include <linux/module.h>
#include <asm/dma-coherence.h>
#include <asm/mipsregs.h>
-#include <asm/time.h>
#include <au1000.h>
@@ -41,18 +38,6 @@
void __init plat_mem_setup(void)
{
- unsigned long est_freq;
-
- /* determine core clock */
- est_freq = au1xxx_calc_clock();
- est_freq += 5000; /* round */
- est_freq -= est_freq % 10000;
- printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
- est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
-
- /* this is faster than wasting cycles trying to approximate it */
- preset_lpj = (est_freq >> 1) / HZ;
-
if (au1xxx_cpu_needs_config_od())
/* Various early Au1xx0 errata corrected by this */
set_c0_config(1 << 19); /* Set Config[OD] */
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 93fa586..50e17e1 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -46,7 +46,7 @@
static cycle_t au1x_counter1_read(struct clocksource *cs)
{
- return au_readl(SYS_RTCREAD);
+ return alchemy_rdsys(AU1000_SYS_RTCREAD);
}
static struct clocksource au1x_counter1_clocksource = {
@@ -60,12 +60,11 @@
static int au1x_rtcmatch2_set_next_event(unsigned long delta,
struct clock_event_device *cd)
{
- delta += au_readl(SYS_RTCREAD);
+ delta += alchemy_rdsys(AU1000_SYS_RTCREAD);
/* wait for register access */
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M21)
+ while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M21)
;
- au_writel(delta, SYS_RTCMATCH2);
- au_sync();
+ alchemy_wrsys(delta, AU1000_SYS_RTCMATCH2);
return 0;
}
@@ -112,31 +111,29 @@
* (the 32S bit seems to be stuck set to 1 once a single clock-
* edge is detected, hence the timeouts).
*/
- if (CNTR_OK != (au_readl(SYS_COUNTER_CNTRL) & CNTR_OK))
+ if (CNTR_OK != (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & CNTR_OK))
goto cntr_err;
/*
* setup counter 1 (RTC) to tick at full speed
*/
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t)
+ while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
- au_writel(0, SYS_RTCTRIM); /* 32.768 kHz */
- au_sync();
+ alchemy_wrsys(0, AU1000_SYS_RTCTRIM); /* 32.768 kHz */
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
+ while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
- au_writel(0, SYS_RTCWRITE);
- au_sync();
+ alchemy_wrsys(0, AU1000_SYS_RTCWRITE);
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
+ while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c
index d193dbe..297805a 100644
--- a/arch/mips/alchemy/common/usb.c
+++ b/arch/mips/alchemy/common/usb.c
@@ -9,6 +9,7 @@
*
*/
+#include <linux/clk.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -387,10 +388,25 @@
udelay(1000);
}
-static inline void au1000_usb_init(unsigned long rb, int reg)
+static inline int au1000_usb_init(unsigned long rb, int reg)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
unsigned long r = __raw_readl(base);
+ struct clk *c;
+
+ /* 48MHz check. Don't init if no one can provide it */
+ c = clk_get(NULL, "usbh_clk");
+ if (IS_ERR(c))
+ return -ENODEV;
+ if (clk_round_rate(c, 48000000) != 48000000) {
+ clk_put(c);
+ return -ENODEV;
+ }
+ if (clk_set_rate(c, 48000000)) {
+ clk_put(c);
+ return -ENODEV;
+ }
+ clk_put(c);
#if defined(__BIG_ENDIAN)
r |= USBHEN_BE;
@@ -400,6 +416,8 @@
__raw_writel(r, base);
wmb();
udelay(1000);
+
+ return 0;
}
@@ -407,8 +425,15 @@
{
void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
unsigned long r = __raw_readl(base + creg);
+ struct clk *c = clk_get(NULL, "usbh_clk");
+
+ if (IS_ERR(c))
+ return;
if (enable) {
+ if (clk_prepare_enable(c))
+ goto out;
+
__raw_writel(r | USBHEN_CE, base + creg);
wmb();
udelay(1000);
@@ -423,7 +448,10 @@
} else {
__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
wmb();
+ clk_disable_unprepare(c);
}
+out:
+ clk_put(c);
}
static inline int au1000_usb_control(int block, int enable, unsigned long rb,
@@ -457,11 +485,11 @@
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
ret = au1000_usb_control(block, enable,
- AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+ AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
break;
case ALCHEMY_CPU_AU1550:
ret = au1000_usb_control(block, enable,
- AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+ AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
break;
case ALCHEMY_CPU_AU1200:
ret = au1200_usb_control(block, enable);
@@ -569,14 +597,18 @@
static int __init alchemy_usb_init(void)
{
+ int ret = 0;
+
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
- au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+ ret = au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR,
+ AU1000_OHCICFG);
break;
case ALCHEMY_CPU_AU1550:
- au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+ ret = au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR,
+ AU1550_OHCICFG);
break;
case ALCHEMY_CPU_AU1200:
au1200_usb_init();
@@ -586,8 +618,9 @@
break;
}
- register_syscore_ops(&alchemy_usb_pm_ops);
+ if (!ret)
+ register_syscore_ops(&alchemy_usb_pm_ops);
- return 0;
+ return ret;
}
arch_initcall(alchemy_usb_init);
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 92dd929..001102e 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -19,6 +19,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/init.h>
@@ -496,6 +497,7 @@
int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
int c0, c1, d0, d1, s0, s1, flashsize = 32, twosocks = 1;
unsigned long pfc;
+ struct clk *c, *p;
if (board == BCSR_WHOAMI_DB1500) {
c0 = AU1500_GPIO2_INT;
@@ -518,14 +520,25 @@
gpio_direction_input(20); /* sd1 cd# */
/* spi_gpio on SSI0 pins */
- pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+ pfc = alchemy_rdsys(AU1000_SYS_PINFUNC);
pfc |= (1 << 0); /* SSI0 pins as GPIOs */
- __raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
- wmb();
+ alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
spi_register_board_info(db1100_spi_info,
ARRAY_SIZE(db1100_spi_info));
+ /* link LCD clock to AUXPLL */
+ p = clk_get(NULL, "auxpll_clk");
+ c = clk_get(NULL, "lcd_intclk");
+ if (!IS_ERR(c) && !IS_ERR(p)) {
+ clk_set_parent(c, p);
+ clk_set_rate(c, clk_get_rate(p));
+ }
+ if (!IS_ERR(c))
+ clk_put(c);
+ if (!IS_ERR(p))
+ clk_put(p);
+
platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
platform_device_register(&db1100_spi_dev);
} else if (board == BCSR_WHOAMI_DB1000) {
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 9e46667..7761889 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -18,6 +18,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
@@ -129,7 +130,6 @@
int __init db1200_board_setup(void)
{
- unsigned long freq0, clksrc, div, pfc;
unsigned short whoami;
if (db1200_detect_board())
@@ -149,34 +149,6 @@
" Board-ID %d Daughtercard ID %d\n", get_system_type(),
(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
- /* SMBus/SPI on PSC0, Audio on PSC1 */
- pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
- pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
- pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
- pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
- __raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
- wmb();
-
- /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
- * CPU clock; all other clock generators off/unused.
- */
- div = (get_au1x00_speed() + 25000000) / 50000000;
- if (div & 1)
- div++;
- div = ((div >> 1) - 1) & 0xff;
-
- freq0 = div << SYS_FC_FRDIV0_BIT;
- __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
- wmb();
- freq0 |= SYS_FC_FE0; /* enable F0 */
- __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
- wmb();
-
- /* psc0_intclk comes 1:1 from F0 */
- clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
- __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
- wmb();
-
return 0;
}
@@ -250,7 +222,7 @@
static int au1200_nand_device_ready(struct mtd_info *mtd)
{
- return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+ return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
}
static struct mtd_partition db1200_nand_parts[] = {
@@ -847,6 +819,7 @@
unsigned long pfc;
unsigned short sw;
int swapped, bid;
+ struct clk *c;
bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
@@ -859,6 +832,24 @@
irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
+ /* SMBus/SPI on PSC0, Audio on PSC1 */
+ pfc = alchemy_rdsys(AU1000_SYS_PINFUNC);
+ pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+ pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
+ pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
+ alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
+
+ /* get 50MHz for I2C driver on PSC0 */
+ c = clk_get(NULL, "psc0_intclk");
+ if (!IS_ERR(c)) {
+ pfc = clk_round_rate(c, 50000000);
+ if ((pfc < 1) || (abs(50000000 - pfc) > 2500000))
+ pr_warn("DB1200: cant get I2C close to 50MHz\n");
+ else
+ clk_set_rate(c, pfc);
+ clk_put(c);
+ }
+
/* insert/eject pairs: one of both is always screaming. To avoid
* issues they must not be automatically enabled when initially
* requested.
@@ -886,7 +877,7 @@
* As a result, in SPI mode, OTG simply won't work (PSC0 uses
* it as an input pin which is pulled high on the boards).
*/
- pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
+ pfc = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
/* switch off OTG VBUS supply */
gpio_request(215, "otg-vbus");
@@ -912,8 +903,7 @@
printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
printk(KERN_INFO " OTG port VBUS supply disabled\n");
}
- __raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
- wmb();
+ alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
/* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
* so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
@@ -932,6 +922,11 @@
}
/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
+ c = clk_get(NULL, "psc1_intclk");
+ if (!IS_ERR(c)) {
+ clk_prepare_enable(c);
+ clk_put(c);
+ }
__raw_writel(PSC_SEL_CLK_SERCLK,
(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index 1aed6be..ef93ee3 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -4,6 +4,7 @@
* (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
*/
+#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
@@ -169,7 +170,7 @@
static int au1300_nand_device_ready(struct mtd_info *mtd)
{
- return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+ return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
}
static struct mtd_partition db1300_nand_parts[] = {
@@ -731,6 +732,7 @@
int __init db1300_dev_setup(void)
{
int swapped, cpldirq;
+ struct clk *c;
/* setup CPLD IRQ muxer */
cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
@@ -761,6 +763,11 @@
(void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
/* I2C uses internal 48MHz EXTCLK1 */
+ c = clk_get(NULL, "psc3_intclk");
+ if (!IS_ERR(c)) {
+ clk_prepare_enable(c);
+ clk_put(c);
+ }
__raw_writel(PSC_SEL_CLK_INTCLK,
(void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index bbd8d98..7e89936 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -4,6 +4,7 @@
* (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com>
*/
+#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
@@ -31,16 +32,16 @@
static void __init db1550_hw_setup(void)
{
void __iomem *base;
+ unsigned long v;
/* complete SPI setup: link psc0_intclk to a 48MHz source,
* and assign GPIO16 to PSC0_SYNC1 (SPI cs# line) as well as PSC1_SYNC
* for AC97 on PB1550.
*/
- base = (void __iomem *)SYS_CLKSRC;
- __raw_writel(__raw_readl(base) | 0x000001e0, base);
- base = (void __iomem *)SYS_PINFUNC;
- __raw_writel(__raw_readl(base) | 1 | SYS_PF_PSC1_S1, base);
- wmb();
+ v = alchemy_rdsys(AU1000_SYS_CLKSRC);
+ alchemy_wrsys(v | 0x000001e0, AU1000_SYS_CLKSRC);
+ v = alchemy_rdsys(AU1000_SYS_PINFUNC);
+ alchemy_wrsys(v | 1 | SYS_PF_PSC1_S1, AU1000_SYS_PINFUNC);
/* reset the AC97 codec now, the reset time in the psc-ac97 driver
* is apparently too short although it's ridiculous as it is.
@@ -151,7 +152,7 @@
static int au1550_nand_device_ready(struct mtd_info *mtd)
{
- return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+ return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
}
static struct mtd_partition db1550_nand_parts[] = {
@@ -217,7 +218,7 @@
static void __init pb1550_nand_setup(void)
{
- int boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) |
+ int boot_swapboot = (alchemy_rdsmem(AU1000_MEM_STSTAT) & (0x7 << 1)) |
((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
gpio_direction_input(206); /* de-assert NAND CS# */
@@ -574,6 +575,7 @@
int __init db1550_dev_setup(void)
{
int swapped, id;
+ struct clk *c;
id = (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) != BCSR_WHOAMI_DB1550);
@@ -582,6 +584,17 @@
spi_register_board_info(db1550_spi_devs,
ARRAY_SIZE(db1550_i2c_devs));
+ c = clk_get(NULL, "psc0_intclk");
+ if (!IS_ERR(c)) {
+ clk_prepare_enable(c);
+ clk_put(c);
+ }
+ c = clk_get(NULL, "psc2_intclk");
+ if (!IS_ERR(c)) {
+ clk_prepare_enable(c);
+ clk_put(c);
+ }
+
/* Audio PSC clock is supplied by codecs (PSC1, 3) FIXME: platdata!! */
__raw_writel(PSC_SEL_CLK_SERCLK,
(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index 61e90fe..bfeb8f3 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -45,23 +45,20 @@
alchemy_gpio1_input_enable();
/* clear and setup wake cause and source */
- au_writel(0, SYS_WAKEMSK);
- au_sync();
- au_writel(0, SYS_WAKESRC);
- au_sync();
+ alchemy_wrsys(0, AU1000_SYS_WAKEMSK);
+ alchemy_wrsys(0, AU1000_SYS_WAKESRC);
- au_writel(db1x_pm_wakemsk, SYS_WAKEMSK);
- au_sync();
+ alchemy_wrsys(db1x_pm_wakemsk, AU1000_SYS_WAKEMSK);
/* setup 1Hz-timer-based wakeup: wait for reg access */
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20)
+ while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M20)
asm volatile ("nop");
- au_writel(au_readl(SYS_TOYREAD) + db1x_pm_sleep_secs, SYS_TOYMATCH2);
- au_sync();
+ alchemy_wrsys(alchemy_rdsys(AU1000_SYS_TOYREAD) + db1x_pm_sleep_secs,
+ AU1000_SYS_TOYMATCH2);
/* wait for value to really hit the register */
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20)
+ while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M20)
asm volatile ("nop");
/* ...and now the sandman can come! */
@@ -102,12 +99,10 @@
/* read and store wakeup source, the clear the register. To
* be able to clear it, WAKEMSK must be cleared first.
*/
- db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC);
+ db1x_pm_last_wakesrc = alchemy_rdsys(AU1000_SYS_WAKESRC);
- au_writel(0, SYS_WAKEMSK);
- au_writel(0, SYS_WAKESRC);
- au_sync();
-
+ alchemy_wrsys(0, AU1000_SYS_WAKEMSK);
+ alchemy_wrsys(0, AU1000_SYS_WAKESRC);
}
static const struct platform_suspend_ops db1x_pm_ops = {
@@ -242,17 +237,13 @@
* for confirmation since there's plenty of time from here to
* the next suspend cycle.
*/
- if (au_readl(SYS_TOYTRIM) != 32767) {
- au_writel(32767, SYS_TOYTRIM);
- au_sync();
- }
+ if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767)
+ alchemy_wrsys(32767, AU1000_SYS_TOYTRIM);
- db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC);
+ db1x_pm_last_wakesrc = alchemy_rdsys(AU1000_SYS_WAKESRC);
- au_writel(0, SYS_WAKESRC);
- au_sync();
- au_writel(0, SYS_WAKEMSK);
- au_sync();
+ alchemy_wrsys(0, AU1000_SYS_WAKESRC);
+ alchemy_wrsys(0, AU1000_SYS_WAKEMSK);
suspend_set_ops(&db1x_pm_ops);
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index 09cb6f7..fc21d36 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -11,8 +11,6 @@
select SSB_DRIVER_PCICORE if PCI
select SSB_PCICORE_HOSTMODE if PCI
select SSB_DRIVER_GPIO
- select GPIOLIB
- select LEDS_GPIO_REGISTER
default y
help
Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -22,6 +20,7 @@
config BCM47XX_BCMA
bool "BCMA Support for Broadcom BCM47XX"
select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_HIGHMEM
select CPU_MIPSR2_IRQ_VI
select BCMA
select BCMA_HOST_SOC
@@ -29,8 +28,6 @@
select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
- select GPIOLIB
- select LEDS_GPIO_REGISTER
default y
help
Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
diff --git a/arch/mips/bcm47xx/bcm47xx_private.h b/arch/mips/bcm47xx/bcm47xx_private.h
index 0194c3b..f1cc9d0 100644
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -3,6 +3,9 @@
#include <linux/kernel.h>
+/* prom.c */
+void __init bcm47xx_prom_highmem_init(void);
+
/* buttons.c */
int __init bcm47xx_buttons_register(void);
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
index 44ab1be..b3ae068 100644
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -58,6 +58,7 @@
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
+ {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RTN10D"},
{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
@@ -80,6 +81,14 @@
{ {0}, NULL},
};
+/* hardware_version, boardnum */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_hw_version_num[] __initconst = {
+ {{BCM47XX_BOARD_MICROSOFT_MN700, "Microsoft MN-700"}, "WL500-", "mn700"},
+ {{BCM47XX_BOARD_ASUS_WL500G, "Asus WL500G"}, "WL500-", "asusX"},
+ { {0}, NULL},
+};
+
/* productid */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
@@ -98,7 +107,7 @@
/* ModelId */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
- {{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"},
+ {{BCM47XX_BOARD_DELL_TM2300, "Dell TrueMobile 2300"}, "WX-5565"},
{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
@@ -180,9 +189,9 @@
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
{ {0}, NULL},
};
@@ -237,6 +246,15 @@
}
}
+ if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0 &&
+ bcm47xx_nvram_getenv("boardtype", buf2, sizeof(buf2)) >= 0) {
+ for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
+ if (!strstarts(buf1, e2->value1) &&
+ !strcmp(buf2, e2->value2))
+ return &e2->board;
+ }
+ }
+
if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
if (!strcmp(buf1, e1->value1))
diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
index 49a1ce0..913182b 100644
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -56,6 +56,11 @@
};
static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500g[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_asus_wl500gd[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -265,7 +270,7 @@
};
static const struct gpio_keys_button
-bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = {
+bcm47xx_buttons_linksys_wrt54g_generic[] __initconst = {
BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -288,6 +293,13 @@
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
+/* Microsoft */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_microsoft_nm700[] __initconst = {
+ BCM47XX_GPIO_KEY(7, KEY_RESTART),
+};
+
/* Motorola */
static const struct gpio_keys_button
@@ -329,6 +341,12 @@
};
static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -395,6 +413,9 @@
case BCM47XX_BOARD_ASUS_WL330GE:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge);
break;
+ case BCM47XX_BOARD_ASUS_WL500G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500g);
+ break;
case BCM47XX_BOARD_ASUS_WL500GD:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd);
break;
@@ -501,12 +522,14 @@
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
break;
- case BCM47XX_BOARD_LINKSYS_WRT54G:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1);
- break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g_generic);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
break;
@@ -517,6 +540,10 @@
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
break;
+ case BCM47XX_BOARD_MICROSOFT_MN700:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_microsoft_nm700);
+ break;
+
case BCM47XX_BOARD_MOTOROLA_WE800G:
err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
break;
@@ -536,6 +563,9 @@
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR834BV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
break;
diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c
index adcb547..903a656 100644
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -35,6 +35,15 @@
};
static const struct gpio_led
+bcm47xx_leds_asus_rtn15u[] __initconst = {
+ /* TODO: Add "wlan" LED */
+ BCM47XX_GPIO_LED(3, "blue", "wan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "blue", "lan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(9, "blue", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_asus_rtn16[] __initconst = {
BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -42,8 +51,8 @@
static const struct gpio_led
bcm47xx_leds_asus_rtn66u[] __initconst = {
- BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(12, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(15, "blue", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
};
static const struct gpio_led
@@ -64,6 +73,11 @@
};
static const struct gpio_led
+bcm47xx_leds_asus_wl500g[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
bcm47xx_leds_asus_wl500gd[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
};
@@ -216,8 +230,8 @@
static const struct gpio_led
bcm47xx_leds_linksys_e1000v21[] __initconst = {
- BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(5, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
};
@@ -292,7 +306,7 @@
};
static const struct gpio_led
-bcm47xx_leds_linksys_wrt54gsv1[] __initconst = {
+bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -306,6 +320,24 @@
BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Verified on: WRT54GS V1.0 */
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g_type_0101[] __initconst = {
+ BCM47XX_GPIO_LED(0, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Verified on: WRT54GL V1.1 */
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g_type_0467[] __initconst = {
+ BCM47XX_GPIO_LED(0, "green", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
static const struct gpio_led
bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -325,11 +357,17 @@
static const struct gpio_led
bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(0, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Microsoft */
+
+static const struct gpio_led
+bcm47xx_leds_microsoft_nm700[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
};
/* Motorola */
@@ -377,6 +415,15 @@
};
static const struct gpio_led
+bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "green", "wan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -417,6 +464,9 @@
case BCM47XX_BOARD_ASUS_RTN12:
bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
break;
+ case BCM47XX_BOARD_ASUS_RTN15U:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn15u);
+ break;
case BCM47XX_BOARD_ASUS_RTN16:
bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16);
break;
@@ -432,6 +482,9 @@
case BCM47XX_BOARD_ASUS_WL330GE:
bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge);
break;
+ case BCM47XX_BOARD_ASUS_WL500G:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500g);
+ break;
case BCM47XX_BOARD_ASUS_WL500GD:
bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd);
break;
@@ -538,12 +591,18 @@
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
break;
- case BCM47XX_BOARD_LINKSYS_WRT54G:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1);
- break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0101);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0467);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
break;
@@ -554,6 +613,10 @@
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
break;
+ case BCM47XX_BOARD_MICROSOFT_MN700:
+ bcm47xx_set_pdata(bcm47xx_leds_microsoft_nm700);
+ break;
+
case BCM47XX_BOARD_MOTOROLA_WE800G:
bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
break;
@@ -570,6 +633,9 @@
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR834BV2:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
break;
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index 1a03a2f..1b170bf 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -51,6 +51,8 @@
chip_id);
}
+static unsigned long lowmem __initdata;
+
static __init void prom_init_mem(void)
{
unsigned long mem;
@@ -87,6 +89,7 @@
if (!memcmp(prom_init, prom_init + mem, 32))
break;
}
+ lowmem = mem;
/* Ignoring the last page when ddr size is 128M. Cached
* accesses to last page is causing the processor to prefetch
@@ -95,7 +98,6 @@
*/
if (c->cputype == CPU_74K && (mem == (128 << 20)))
mem -= 0x1000;
-
add_memory_region(0, mem, BOOT_MEM_RAM);
}
@@ -114,3 +116,67 @@
void __init prom_free_prom_memory(void)
{
}
+
+#if defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM)
+
+#define EXTVBASE 0xc0000000
+#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> _PFN_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6) | 1)
+
+#include <asm/tlbflush.h>
+
+/* Stripped version of tlb_init, with the call to build_tlb_refill_handler
+ * dropped. Calling it at this stage causes a hang.
+ */
+void __cpuinit early_tlb_init(void)
+{
+ write_c0_pagemask(PM_DEFAULT_MASK);
+ write_c0_wired(0);
+ temp_tlb_entry = current_cpu_data.tlbsize - 1;
+ local_flush_tlb_all();
+}
+
+void __init bcm47xx_prom_highmem_init(void)
+{
+ unsigned long off = (unsigned long)prom_init;
+ unsigned long extmem = 0;
+ bool highmem_region = false;
+
+ if (WARN_ON(bcm47xx_bus_type != BCM47XX_BUS_TYPE_BCMA))
+ return;
+
+ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
+ highmem_region = true;
+
+ if (lowmem != 128 << 20 || !highmem_region)
+ return;
+
+ early_tlb_init();
+
+ /* Add one temporary TLB entry to map SDRAM Region 2.
+ * Physical Virtual
+ * 0x80000000 0xc0000000 (1st: 256MB)
+ * 0x90000000 0xd0000000 (2nd: 256MB)
+ */
+ add_temporary_entry(ENTRYLO(0x80000000),
+ ENTRYLO(0x80000000 + (256 << 20)),
+ EXTVBASE, PM_256M);
+
+ off = EXTVBASE + __pa(off);
+ for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
+ if (!memcmp(prom_init, (void *)(off + extmem), 16))
+ break;
+ }
+ extmem -= lowmem;
+
+ early_tlb_init();
+
+ if (!extmem)
+ return;
+
+ pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n",
+ extmem >> 20);
+
+ /* TODO: Register extra memory */
+}
+
+#endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 63a4b0e..2b63e7e 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -59,12 +59,12 @@
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 3);
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 3);
break;
#endif
}
@@ -218,6 +218,9 @@
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
bcm47xx_register_bcma();
bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
+#ifdef CONFIG_HIGHMEM
+ bcm47xx_prom_highmem_init();
+#endif
#endif
} else {
printk(KERN_INFO "bcm47xx: using ssb bus\n");
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index da4cdb1..41226b6 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -28,6 +28,8 @@
#include <bcm47xx.h>
#include <bcm47xx_nvram.h>
+#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
static void create_key(const char *prefix, const char *postfix,
const char *name, char *buf, int len)
@@ -631,6 +633,33 @@
}
}
+static bool bcm47xx_is_valid_mac(u8 *mac)
+{
+ return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c);
+}
+
+static int bcm47xx_increase_mac_addr(u8 *mac, u8 num)
+{
+ u8 *oui = mac + ETH_ALEN/2 - 1;
+ u8 *p = mac + ETH_ALEN - 1;
+
+ do {
+ (*p) += num;
+ if (*p > num)
+ break;
+ p--;
+ num = 1;
+ } while (p != oui);
+
+ if (p == oui) {
+ pr_err("unable to fetch mac address\n");
+ return -ENOENT;
+ }
+ return 0;
+}
+
+static int mac_addr_used = 2;
+
static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
@@ -648,6 +677,25 @@
nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
+
+ /* The address prefix 00:90:4C is used by Broadcom in their initial
+ configuration. When a mac address with the prefix 00:90:4C is used
+ all devices from the same series are sharing the same mac address.
+ To prevent mac address collisions we replace them with a mac address
+ based on the base address. */
+ if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
+ u8 mac[6];
+
+ nvram_read_macaddr(NULL, "et0macaddr", mac, false);
+ if (bcm47xx_is_valid_mac(mac)) {
+ int err = bcm47xx_increase_mac_addr(mac, mac_addr_used);
+
+ if (!err) {
+ ether_addr_copy(sprom->il0mac, mac);
+ mac_addr_used++;
+ }
+ }
+ }
}
static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index fd4e76c..536f644 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -24,7 +24,9 @@
const int *bcm63xx_irqs;
EXPORT_SYMBOL(bcm63xx_irqs);
-static u16 bcm63xx_cpu_id;
+u16 bcm63xx_cpu_id __read_mostly;
+EXPORT_SYMBOL(bcm63xx_cpu_id);
+
static u8 bcm63xx_cpu_rev;
static unsigned int bcm63xx_cpu_freq;
static unsigned int bcm63xx_memory_size;
@@ -97,13 +99,6 @@
};
-u16 __bcm63xx_get_cpu_id(void)
-{
- return bcm63xx_cpu_id;
-}
-
-EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
-
u8 bcm63xx_get_cpu_rev(void)
{
return bcm63xx_cpu_rev;
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
index 52bc01d..e828477 100644
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -14,7 +14,6 @@
#include <bcm63xx_io.h>
#include <bcm63xx_regs.h>
-#ifdef BCMCPU_RUNTIME_DETECT
static const unsigned long bcm6348_regs_enetdmac[] = {
[ENETDMAC_CHANCFG] = ENETDMAC_CHANCFG_REG,
[ENETDMAC_IR] = ENETDMAC_IR_REG,
@@ -43,9 +42,6 @@
else
bcm63xx_regs_enetdmac = bcm6348_regs_enetdmac;
}
-#else
-static __init void bcm63xx_enetdmac_regs_init(void) { }
-#endif
static struct resource shared_res[] = {
{
diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c
index d12daed..ad448e4 100644
--- a/arch/mips/bcm63xx/dev-spi.c
+++ b/arch/mips/bcm63xx/dev-spi.c
@@ -18,7 +18,6 @@
#include <bcm63xx_dev_spi.h>
#include <bcm63xx_regs.h>
-#ifdef BCMCPU_RUNTIME_DETECT
/*
* register offsets
*/
@@ -41,9 +40,6 @@
BCMCPU_IS_6362() || BCMCPU_IS_6368())
bcm63xx_regs_spi = bcm6358_regs_spi;
}
-#else
-static __init void bcm63xx_spi_regs_init(void) { }
-#endif
static struct resource spi_resources[] = {
{
diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
index a6c2135..468bc7b 100644
--- a/arch/mips/bcm63xx/gpio.c
+++ b/arch/mips/bcm63xx/gpio.c
@@ -18,19 +18,6 @@
#include <bcm63xx_io.h>
#include <bcm63xx_regs.h>
-#ifndef BCMCPU_RUNTIME_DETECT
-#define gpio_out_low_reg GPIO_DATA_LO_REG
-#ifdef CONFIG_BCM63XX_CPU_6345
-#ifdef gpio_out_low_reg
-#undef gpio_out_low_reg
-#define gpio_out_low_reg GPIO_DATA_LO_REG_6345
-#endif /* gpio_out_low_reg */
-#endif /* CONFIG_BCM63XX_CPU_6345 */
-
-static inline void bcm63xx_gpio_out_low_reg_init(void)
-{
-}
-#else /* ! BCMCPU_RUNTIME_DETECT */
static u32 gpio_out_low_reg;
static void bcm63xx_gpio_out_low_reg_init(void)
@@ -44,7 +31,6 @@
break;
}
}
-#endif /* ! BCMCPU_RUNTIME_DETECT */
static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
static u32 gpio_out_low, gpio_out_high;
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index 1525f8a..37eb2d1 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/irq.h>
+#include <linux/spinlock.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <bcm63xx_cpu.h>
@@ -19,222 +20,20 @@
#include <bcm63xx_io.h>
#include <bcm63xx_irq.h>
-static void __dispatch_internal(void) __maybe_unused;
-static void __dispatch_internal_64(void) __maybe_unused;
-static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
-static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
-static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
-static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
-#ifndef BCMCPU_RUNTIME_DETECT
-#ifdef CONFIG_BCM63XX_CPU_3368
-#define irq_stat_reg PERF_IRQSTAT_3368_REG
-#define irq_mask_reg PERF_IRQMASK_3368_REG
-#define irq_bits 32
-#define is_ext_irq_cascaded 0
-#define ext_irq_start 0
-#define ext_irq_end 0
-#define ext_irq_count 4
-#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_3368
-#define ext_irq_cfg_reg2 0
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6328
-#define irq_stat_reg PERF_IRQSTAT_6328_REG
-#define irq_mask_reg PERF_IRQMASK_6328_REG
-#define irq_bits 64
-#define is_ext_irq_cascaded 1
-#define ext_irq_start (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-#define ext_irq_end (BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
-#define ext_irq_count 4
-#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6328
-#define ext_irq_cfg_reg2 0
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6338
-#define irq_stat_reg PERF_IRQSTAT_6338_REG
-#define irq_mask_reg PERF_IRQMASK_6338_REG
-#define irq_bits 32
-#define is_ext_irq_cascaded 0
-#define ext_irq_start 0
-#define ext_irq_end 0
-#define ext_irq_count 4
-#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6338
-#define ext_irq_cfg_reg2 0
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6345
-#define irq_stat_reg PERF_IRQSTAT_6345_REG
-#define irq_mask_reg PERF_IRQMASK_6345_REG
-#define irq_bits 32
-#define is_ext_irq_cascaded 0
-#define ext_irq_start 0
-#define ext_irq_end 0
-#define ext_irq_count 4
-#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6345
-#define ext_irq_cfg_reg2 0
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6348
-#define irq_stat_reg PERF_IRQSTAT_6348_REG
-#define irq_mask_reg PERF_IRQMASK_6348_REG
-#define irq_bits 32
-#define is_ext_irq_cascaded 0
-#define ext_irq_start 0
-#define ext_irq_end 0
-#define ext_irq_count 4
-#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6348
-#define ext_irq_cfg_reg2 0
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6358
-#define irq_stat_reg PERF_IRQSTAT_6358_REG
-#define irq_mask_reg PERF_IRQMASK_6358_REG
-#define irq_bits 32
-#define is_ext_irq_cascaded 1
-#define ext_irq_start (BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-#define ext_irq_end (BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE)
-#define ext_irq_count 4
-#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6358
-#define ext_irq_cfg_reg2 0
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6362
-#define irq_stat_reg PERF_IRQSTAT_6362_REG
-#define irq_mask_reg PERF_IRQMASK_6362_REG
-#define irq_bits 64
-#define is_ext_irq_cascaded 1
-#define ext_irq_start (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-#define ext_irq_end (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
-#define ext_irq_count 4
-#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6362
-#define ext_irq_cfg_reg2 0
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6368
-#define irq_stat_reg PERF_IRQSTAT_6368_REG
-#define irq_mask_reg PERF_IRQMASK_6368_REG
-#define irq_bits 64
-#define is_ext_irq_cascaded 1
-#define ext_irq_start (BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-#define ext_irq_end (BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE)
-#define ext_irq_count 6
-#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6368
-#define ext_irq_cfg_reg2 PERF_EXTIRQ_CFG_REG2_6368
-#endif
+static DEFINE_SPINLOCK(ipic_lock);
+static DEFINE_SPINLOCK(epic_lock);
-#if irq_bits == 32
-#define dispatch_internal __dispatch_internal
-#define internal_irq_mask __internal_irq_mask_32
-#define internal_irq_unmask __internal_irq_unmask_32
-#else
-#define dispatch_internal __dispatch_internal_64
-#define internal_irq_mask __internal_irq_mask_64
-#define internal_irq_unmask __internal_irq_unmask_64
-#endif
-
-#define irq_stat_addr (bcm63xx_regset_address(RSET_PERF) + irq_stat_reg)
-#define irq_mask_addr (bcm63xx_regset_address(RSET_PERF) + irq_mask_reg)
-
-static inline void bcm63xx_init_irq(void)
-{
-}
-#else /* ! BCMCPU_RUNTIME_DETECT */
-
-static u32 irq_stat_addr, irq_mask_addr;
-static void (*dispatch_internal)(void);
+static u32 irq_stat_addr[2];
+static u32 irq_mask_addr[2];
+static void (*dispatch_internal)(int cpu);
static int is_ext_irq_cascaded;
static unsigned int ext_irq_count;
static unsigned int ext_irq_start, ext_irq_end;
static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
-static void (*internal_irq_mask)(unsigned int irq);
-static void (*internal_irq_unmask)(unsigned int irq);
+static void (*internal_irq_mask)(struct irq_data *d);
+static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
-static void bcm63xx_init_irq(void)
-{
- int irq_bits;
-
- irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
- irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
-
- switch (bcm63xx_get_cpu_id()) {
- case BCM3368_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_3368_REG;
- irq_mask_addr += PERF_IRQMASK_3368_REG;
- irq_bits = 32;
- ext_irq_count = 4;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
- break;
- case BCM6328_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6328_REG;
- irq_mask_addr += PERF_IRQMASK_6328_REG;
- irq_bits = 64;
- ext_irq_count = 4;
- is_ext_irq_cascaded = 1;
- ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
- ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
- break;
- case BCM6338_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6338_REG;
- irq_mask_addr += PERF_IRQMASK_6338_REG;
- irq_bits = 32;
- ext_irq_count = 4;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
- break;
- case BCM6345_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6345_REG;
- irq_mask_addr += PERF_IRQMASK_6345_REG;
- irq_bits = 32;
- ext_irq_count = 4;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
- break;
- case BCM6348_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6348_REG;
- irq_mask_addr += PERF_IRQMASK_6348_REG;
- irq_bits = 32;
- ext_irq_count = 4;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
- break;
- case BCM6358_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6358_REG;
- irq_mask_addr += PERF_IRQMASK_6358_REG;
- irq_bits = 32;
- ext_irq_count = 4;
- is_ext_irq_cascaded = 1;
- ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
- ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
- break;
- case BCM6362_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6362_REG;
- irq_mask_addr += PERF_IRQMASK_6362_REG;
- irq_bits = 64;
- ext_irq_count = 4;
- is_ext_irq_cascaded = 1;
- ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
- ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
- break;
- case BCM6368_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6368_REG;
- irq_mask_addr += PERF_IRQMASK_6368_REG;
- irq_bits = 64;
- ext_irq_count = 6;
- is_ext_irq_cascaded = 1;
- ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
- ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
- ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
- break;
- default:
- BUG();
- }
-
- if (irq_bits == 32) {
- dispatch_internal = __dispatch_internal;
- internal_irq_mask = __internal_irq_mask_32;
- internal_irq_unmask = __internal_irq_unmask_32;
- } else {
- dispatch_internal = __dispatch_internal_64;
- internal_irq_mask = __internal_irq_mask_64;
- internal_irq_unmask = __internal_irq_unmask_64;
- }
-}
-#endif /* ! BCMCPU_RUNTIME_DETECT */
static inline u32 get_ext_irq_perf_reg(int irq)
{
@@ -252,53 +51,113 @@
do_IRQ(intbit + IRQ_INTERNAL_BASE);
}
+static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
+ const struct cpumask *m)
+{
+ bool enable = cpu_online(cpu);
+
+#ifdef CONFIG_SMP
+ if (m)
+ enable &= cpu_isset(cpu, *m);
+ else if (irqd_affinity_was_set(d))
+ enable &= cpu_isset(cpu, *d->affinity);
+#endif
+ return enable;
+}
+
/*
* dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
* prioritize any interrupt relatively to another. the static counter
* will resume the loop where it ended the last time we left this
* function.
*/
-static void __dispatch_internal(void)
-{
- u32 pending;
- static int i;
- pending = bcm_readl(irq_stat_addr) & bcm_readl(irq_mask_addr);
-
- if (!pending)
- return ;
-
- while (1) {
- int to_call = i;
-
- i = (i + 1) & 0x1f;
- if (pending & (1 << to_call)) {
- handle_internal(to_call);
- break;
- }
- }
+#define BUILD_IPIC_INTERNAL(width) \
+void __dispatch_internal_##width(int cpu) \
+{ \
+ u32 pending[width / 32]; \
+ unsigned int src, tgt; \
+ bool irqs_pending = false; \
+ static unsigned int i[2]; \
+ unsigned int *next = &i[cpu]; \
+ unsigned long flags; \
+ \
+ /* read registers in reverse order */ \
+ spin_lock_irqsave(&ipic_lock, flags); \
+ for (src = 0, tgt = (width / 32); src < (width / 32); src++) { \
+ u32 val; \
+ \
+ val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
+ val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
+ pending[--tgt] = val; \
+ \
+ if (val) \
+ irqs_pending = true; \
+ } \
+ spin_unlock_irqrestore(&ipic_lock, flags); \
+ \
+ if (!irqs_pending) \
+ return; \
+ \
+ while (1) { \
+ unsigned int to_call = *next; \
+ \
+ *next = (*next + 1) & (width - 1); \
+ if (pending[to_call / 32] & (1 << (to_call & 0x1f))) { \
+ handle_internal(to_call); \
+ break; \
+ } \
+ } \
+} \
+ \
+static void __internal_irq_mask_##width(struct irq_data *d) \
+{ \
+ u32 val; \
+ unsigned irq = d->irq - IRQ_INTERNAL_BASE; \
+ unsigned reg = (irq / 32) ^ (width/32 - 1); \
+ unsigned bit = irq & 0x1f; \
+ unsigned long flags; \
+ int cpu; \
+ \
+ spin_lock_irqsave(&ipic_lock, flags); \
+ for_each_present_cpu(cpu) { \
+ if (!irq_mask_addr[cpu]) \
+ break; \
+ \
+ val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
+ val &= ~(1 << bit); \
+ bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
+ } \
+ spin_unlock_irqrestore(&ipic_lock, flags); \
+} \
+ \
+static void __internal_irq_unmask_##width(struct irq_data *d, \
+ const struct cpumask *m) \
+{ \
+ u32 val; \
+ unsigned irq = d->irq - IRQ_INTERNAL_BASE; \
+ unsigned reg = (irq / 32) ^ (width/32 - 1); \
+ unsigned bit = irq & 0x1f; \
+ unsigned long flags; \
+ int cpu; \
+ \
+ spin_lock_irqsave(&ipic_lock, flags); \
+ for_each_present_cpu(cpu) { \
+ if (!irq_mask_addr[cpu]) \
+ break; \
+ \
+ val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
+ if (enable_irq_for_cpu(cpu, d, m)) \
+ val |= (1 << bit); \
+ else \
+ val &= ~(1 << bit); \
+ bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
+ } \
+ spin_unlock_irqrestore(&ipic_lock, flags); \
}
-static void __dispatch_internal_64(void)
-{
- u64 pending;
- static int i;
-
- pending = bcm_readq(irq_stat_addr) & bcm_readq(irq_mask_addr);
-
- if (!pending)
- return ;
-
- while (1) {
- int to_call = i;
-
- i = (i + 1) & 0x3f;
- if (pending & (1ull << to_call)) {
- handle_internal(to_call);
- break;
- }
- }
-}
+BUILD_IPIC_INTERNAL(32);
+BUILD_IPIC_INTERNAL(64);
asmlinkage void plat_irq_dispatch(void)
{
@@ -317,8 +176,11 @@
if (cause & CAUSEF_IP1)
do_IRQ(1);
if (cause & CAUSEF_IP2)
- dispatch_internal();
- if (!is_ext_irq_cascaded) {
+ dispatch_internal(0);
+ if (is_ext_irq_cascaded) {
+ if (cause & CAUSEF_IP3)
+ dispatch_internal(1);
+ } else {
if (cause & CAUSEF_IP3)
do_IRQ(IRQ_EXT_0);
if (cause & CAUSEF_IP4)
@@ -335,50 +197,14 @@
* internal IRQs operations: only mask/unmask on PERF irq mask
* register.
*/
-static void __internal_irq_mask_32(unsigned int irq)
-{
- u32 mask;
-
- mask = bcm_readl(irq_mask_addr);
- mask &= ~(1 << irq);
- bcm_writel(mask, irq_mask_addr);
-}
-
-static void __internal_irq_mask_64(unsigned int irq)
-{
- u64 mask;
-
- mask = bcm_readq(irq_mask_addr);
- mask &= ~(1ull << irq);
- bcm_writeq(mask, irq_mask_addr);
-}
-
-static void __internal_irq_unmask_32(unsigned int irq)
-{
- u32 mask;
-
- mask = bcm_readl(irq_mask_addr);
- mask |= (1 << irq);
- bcm_writel(mask, irq_mask_addr);
-}
-
-static void __internal_irq_unmask_64(unsigned int irq)
-{
- u64 mask;
-
- mask = bcm_readq(irq_mask_addr);
- mask |= (1ull << irq);
- bcm_writeq(mask, irq_mask_addr);
-}
-
static void bcm63xx_internal_irq_mask(struct irq_data *d)
{
- internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
+ internal_irq_mask(d);
}
static void bcm63xx_internal_irq_unmask(struct irq_data *d)
{
- internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE);
+ internal_irq_unmask(d, NULL);
}
/*
@@ -389,8 +215,10 @@
{
unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
u32 reg, regaddr;
+ unsigned long flags;
regaddr = get_ext_irq_perf_reg(irq);
+ spin_lock_irqsave(&epic_lock, flags);
reg = bcm_perf_readl(regaddr);
if (BCMCPU_IS_6348())
@@ -399,16 +227,20 @@
reg &= ~EXTIRQ_CFG_MASK(irq % 4);
bcm_perf_writel(reg, regaddr);
+ spin_unlock_irqrestore(&epic_lock, flags);
+
if (is_ext_irq_cascaded)
- internal_irq_mask(irq + ext_irq_start);
+ internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
}
static void bcm63xx_external_irq_unmask(struct irq_data *d)
{
unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
u32 reg, regaddr;
+ unsigned long flags;
regaddr = get_ext_irq_perf_reg(irq);
+ spin_lock_irqsave(&epic_lock, flags);
reg = bcm_perf_readl(regaddr);
if (BCMCPU_IS_6348())
@@ -417,17 +249,21 @@
reg |= EXTIRQ_CFG_MASK(irq % 4);
bcm_perf_writel(reg, regaddr);
+ spin_unlock_irqrestore(&epic_lock, flags);
if (is_ext_irq_cascaded)
- internal_irq_unmask(irq + ext_irq_start);
+ internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
+ NULL);
}
static void bcm63xx_external_irq_clear(struct irq_data *d)
{
unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
u32 reg, regaddr;
+ unsigned long flags;
regaddr = get_ext_irq_perf_reg(irq);
+ spin_lock_irqsave(&epic_lock, flags);
reg = bcm_perf_readl(regaddr);
if (BCMCPU_IS_6348())
@@ -436,6 +272,7 @@
reg |= EXTIRQ_CFG_CLEAR(irq % 4);
bcm_perf_writel(reg, regaddr);
+ spin_unlock_irqrestore(&epic_lock, flags);
}
static int bcm63xx_external_irq_set_type(struct irq_data *d,
@@ -444,6 +281,7 @@
unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
u32 reg, regaddr;
int levelsense, sense, bothedge;
+ unsigned long flags;
flow_type &= IRQ_TYPE_SENSE_MASK;
@@ -478,6 +316,7 @@
}
regaddr = get_ext_irq_perf_reg(irq);
+ spin_lock_irqsave(&epic_lock, flags);
reg = bcm_perf_readl(regaddr);
irq %= 4;
@@ -522,6 +361,7 @@
}
bcm_perf_writel(reg, regaddr);
+ spin_unlock_irqrestore(&epic_lock, flags);
irqd_set_trigger_type(d, flow_type);
if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
@@ -532,6 +372,18 @@
return IRQ_SET_MASK_OK_NOCOPY;
}
+#ifdef CONFIG_SMP
+static int bcm63xx_internal_set_affinity(struct irq_data *data,
+ const struct cpumask *dest,
+ bool force)
+{
+ if (!irqd_irq_disabled(data))
+ internal_irq_unmask(data, dest);
+
+ return 0;
+}
+#endif
+
static struct irq_chip bcm63xx_internal_irq_chip = {
.name = "bcm63xx_ipic",
.irq_mask = bcm63xx_internal_irq_mask,
@@ -554,12 +406,130 @@
.flags = IRQF_NO_THREAD,
};
+#ifdef CONFIG_SMP
+static struct irqaction cpu_ip3_cascade_action = {
+ .handler = no_action,
+ .name = "cascade_ip3",
+ .flags = IRQF_NO_THREAD,
+};
+#endif
+
static struct irqaction cpu_ext_cascade_action = {
.handler = no_action,
.name = "cascade_extirq",
.flags = IRQF_NO_THREAD,
};
+static void bcm63xx_init_irq(void)
+{
+ int irq_bits;
+
+ irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
+ irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
+ irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
+ irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
+
+ switch (bcm63xx_get_cpu_id()) {
+ case BCM3368_CPU_ID:
+ irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
+ irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
+ irq_stat_addr[1] = 0;
+ irq_stat_addr[1] = 0;
+ irq_bits = 32;
+ ext_irq_count = 4;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+ break;
+ case BCM6328_CPU_ID:
+ irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
+ irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
+ irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
+ irq_stat_addr[1] += PERF_IRQMASK_6328_REG(1);
+ irq_bits = 64;
+ ext_irq_count = 4;
+ is_ext_irq_cascaded = 1;
+ ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+ ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
+ break;
+ case BCM6338_CPU_ID:
+ irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
+ irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
+ irq_stat_addr[1] = 0;
+ irq_mask_addr[1] = 0;
+ irq_bits = 32;
+ ext_irq_count = 4;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
+ break;
+ case BCM6345_CPU_ID:
+ irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
+ irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
+ irq_stat_addr[1] = 0;
+ irq_mask_addr[1] = 0;
+ irq_bits = 32;
+ ext_irq_count = 4;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
+ break;
+ case BCM6348_CPU_ID:
+ irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
+ irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
+ irq_stat_addr[1] = 0;
+ irq_mask_addr[1] = 0;
+ irq_bits = 32;
+ ext_irq_count = 4;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
+ break;
+ case BCM6358_CPU_ID:
+ irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
+ irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
+ irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
+ irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
+ irq_bits = 32;
+ ext_irq_count = 4;
+ is_ext_irq_cascaded = 1;
+ ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+ ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
+ break;
+ case BCM6362_CPU_ID:
+ irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
+ irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
+ irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
+ irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
+ irq_bits = 64;
+ ext_irq_count = 4;
+ is_ext_irq_cascaded = 1;
+ ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+ ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
+ break;
+ case BCM6368_CPU_ID:
+ irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
+ irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
+ irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
+ irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
+ irq_bits = 64;
+ ext_irq_count = 6;
+ is_ext_irq_cascaded = 1;
+ ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+ ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
+ ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
+ break;
+ default:
+ BUG();
+ }
+
+ if (irq_bits == 32) {
+ dispatch_internal = __dispatch_internal_32;
+ internal_irq_mask = __internal_irq_mask_32;
+ internal_irq_unmask = __internal_irq_unmask_32;
+ } else {
+ dispatch_internal = __dispatch_internal_64;
+ internal_irq_mask = __internal_irq_mask_64;
+ internal_irq_unmask = __internal_irq_unmask_64;
+ }
+}
+
void __init arch_init_irq(void)
{
int i;
@@ -580,4 +550,14 @@
}
setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
+#ifdef CONFIG_SMP
+ if (is_ext_irq_cascaded) {
+ setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
+ bcm63xx_internal_irq_chip.irq_set_affinity =
+ bcm63xx_internal_set_affinity;
+
+ cpumask_clear(irq_default_affinity);
+ cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
+ }
+#endif
}
diff --git a/arch/mips/bcm63xx/reset.c b/arch/mips/bcm63xx/reset.c
index acbeb1f..d1fe51e 100644
--- a/arch/mips/bcm63xx/reset.c
+++ b/arch/mips/bcm63xx/reset.c
@@ -125,8 +125,6 @@
#define BCM6368_RESET_PCIE 0
#define BCM6368_RESET_PCIE_EXT 0
-#ifdef BCMCPU_RUNTIME_DETECT
-
/*
* core reset bits
*/
@@ -188,64 +186,6 @@
return 0;
}
-#else
-
-#ifdef CONFIG_BCM63XX_CPU_3368
-static const u32 bcm63xx_reset_bits[] = {
- __GEN_RESET_BITS_TABLE(3368)
-};
-#define reset_reg PERF_SOFTRESET_6358_REG
-#endif
-
-#ifdef CONFIG_BCM63XX_CPU_6328
-static const u32 bcm63xx_reset_bits[] = {
- __GEN_RESET_BITS_TABLE(6328)
-};
-#define reset_reg PERF_SOFTRESET_6328_REG
-#endif
-
-#ifdef CONFIG_BCM63XX_CPU_6338
-static const u32 bcm63xx_reset_bits[] = {
- __GEN_RESET_BITS_TABLE(6338)
-};
-#define reset_reg PERF_SOFTRESET_REG
-#endif
-
-#ifdef CONFIG_BCM63XX_CPU_6345
-static const u32 bcm63xx_reset_bits[] = { };
-#define reset_reg 0
-#endif
-
-#ifdef CONFIG_BCM63XX_CPU_6348
-static const u32 bcm63xx_reset_bits[] = {
- __GEN_RESET_BITS_TABLE(6348)
-};
-#define reset_reg PERF_SOFTRESET_REG
-#endif
-
-#ifdef CONFIG_BCM63XX_CPU_6358
-static const u32 bcm63xx_reset_bits[] = {
- __GEN_RESET_BITS_TABLE(6358)
-};
-#define reset_reg PERF_SOFTRESET_6358_REG
-#endif
-
-#ifdef CONFIG_BCM63XX_CPU_6362
-static const u32 bcm63xx_reset_bits[] = {
- __GEN_RESET_BITS_TABLE(6362)
-};
-#define reset_reg PERF_SOFTRESET_6362_REG
-#endif
-
-#ifdef CONFIG_BCM63XX_CPU_6368
-static const u32 bcm63xx_reset_bits[] = {
- __GEN_RESET_BITS_TABLE(6368)
-};
-#define reset_reg PERF_SOFTRESET_6368_REG
-#endif
-
-static int __init bcm63xx_reset_bits_init(void) { return 0; }
-#endif
static DEFINE_SPINLOCK(reset_mutex);
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index c00c4dd..b49c7ad 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -67,10 +67,24 @@
#include "../../../../lib/decompress_unxz.c"
#endif
+unsigned long __stack_chk_guard;
+
+void __stack_chk_guard_setup(void)
+{
+ __stack_chk_guard = 0x000a0dff;
+}
+
+void __stack_chk_fail(void)
+{
+ error("stack-protector: Kernel stack is corrupted\n");
+}
+
void decompress_kernel(unsigned long boot_heap_start)
{
unsigned long zimage_start, zimage_size;
+ __stack_chk_guard_setup();
+
zimage_start = (unsigned long)(&__image_begin);
zimage_size = (unsigned long)(&__image_end) -
(unsigned long)(&__image_begin);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index b764df6..5dfef84 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -186,6 +186,15 @@
return 7 - ipd_port;
else
return -1;
+ case CVMX_BOARD_TYPE_CUST_DSR1000N:
+ /*
+ * Port 2 connects to Broadcom PHY (B5081). Other ports (0-1)
+ * connect to a switch (BCM53115).
+ */
+ if (ipd_port == 2)
+ return 8;
+ else
+ return -1;
}
/* Some unknown board. Somebody forgot to update this function... */
@@ -274,6 +283,18 @@
return result;
}
break;
+ case CVMX_BOARD_TYPE_CUST_DSR1000N:
+ if (ipd_port == 0 || ipd_port == 1) {
+ /* Ports 0 and 1 connect to a switch (BCM53115). */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ } else {
+ /* Port 2 uses a Broadcom PHY (B5081). */
+ is_broadcom_phy = 1;
+ }
+ break;
}
phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
@@ -738,6 +759,7 @@
case CVMX_BOARD_TYPE_LANAI2_G:
case CVMX_BOARD_TYPE_NIC10E_66:
case CVMX_BOARD_TYPE_UBNT_E100:
+ case CVMX_BOARD_TYPE_CUST_DSR1000N:
return USB_CLOCK_TYPE_CRYSTAL_12;
case CVMX_BOARD_TYPE_NIC10E:
return USB_CLOCK_TYPE_REF_12;
diff --git a/arch/mips/cavium-octeon/oct_ilm.c b/arch/mips/cavium-octeon/oct_ilm.c
index 71b213d..2d68a39 100644
--- a/arch/mips/cavium-octeon/oct_ilm.c
+++ b/arch/mips/cavium-octeon/oct_ilm.c
@@ -194,8 +194,7 @@
static __exit void oct_ilm_module_exit(void)
{
disable_timer(TIMER_NUM);
- if (dir)
- debugfs_remove_recursive(dir);
+ debugfs_remove_recursive(dir);
free_irq(OCTEON_IRQ_TIMER0 + TIMER_NUM, 0);
}
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index a7b3ae1..ecd903d 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -84,9 +84,14 @@
#ifdef CONFIG_HOTPLUG_CPU
struct linux_app_boot_info *labi;
+ if (!setup_max_cpus)
+ return;
+
labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER);
- if (labi->labi_signature != LABI_SIGNATURE)
- panic("The bootloader version on this board is incorrect.");
+ if (labi->labi_signature != LABI_SIGNATURE) {
+ pr_info("The bootloader on this board does not support HOTPLUG_CPU.");
+ return;
+ }
octeon_bootloader_entry_addr = labi->InitTLBStart_addr;
#endif
@@ -129,7 +134,8 @@
* will assign CPU numbers for possible cores as well. Cores
* are always consecutively numberd from 0.
*/
- for (id = 0; id < num_cores && id < NR_CPUS; id++) {
+ for (id = 0; setup_max_cpus && octeon_bootloader_entry_addr &&
+ id < num_cores && id < NR_CPUS; id++) {
if (!(core_mask & (1 << id))) {
set_cpu_possible(cpus, true);
__cpu_number_map[id] = cpus;
@@ -192,14 +198,6 @@
*/
void octeon_prepare_cpus(unsigned int max_cpus)
{
-#ifdef CONFIG_HOTPLUG_CPU
- struct linux_app_boot_info *labi;
-
- labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER);
-
- if (labi->labi_signature != LABI_SIGNATURE)
- panic("The bootloader version on this board is incorrect.");
-#endif
/*
* Only the low order mailbox bits are used for IPIs, leave
* the other bits alone.
@@ -237,6 +235,9 @@
if (cpu == 0)
return -EBUSY;
+ if (!octeon_bootloader_entry_addr)
+ return -ENOTSUPP;
+
set_cpu_online(cpu, false);
cpu_clear(cpu, cpu_callin_map);
local_irq_disable();
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index ea1761f..130e31b 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -1,6 +1,6 @@
CONFIG_MACH_LOONGSON=y
CONFIG_SWIOTLB=y
-CONFIG_LEMOTE_MACH3A=y
+CONFIG_LOONGSON_MACH3X=y
CONFIG_CPU_LOONGSON3=y
CONFIG_64BIT=y
CONFIG_PAGE_SIZE_16KB=y
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 0543918..335e529 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -15,4 +15,5 @@
generic-y += serial.h
generic-y += trace_clock.h
generic-y += ucontext.h
+generic-y += user.h
generic-y += xor.h
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 3f74545..3b0e51d 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -52,7 +52,7 @@
*/
#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff)
#define XPHYSADDR(a) ((_ACAST64_(a)) & \
- _CONST64_(0x000000ffffffffff))
+ _CONST64_(0x0000ffffffffffff))
#ifdef CONFIG_64BIT
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 935543f..cd9a98b 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -10,6 +10,7 @@
#include <asm/hazards.h>
#include <asm/asm-offsets.h>
+#include <asm/msa.h>
#ifdef CONFIG_32BIT
#include <asm/asmmacro-32.h>
@@ -378,9 +379,19 @@
st_d 29, THREAD_FPR29, \thread
st_d 30, THREAD_FPR30, \thread
st_d 31, THREAD_FPR31, \thread
+ .set push
+ .set noat
+ cfcmsa $1, MSA_CSR
+ sw $1, THREAD_MSA_CSR(\thread)
+ .set pop
.endm
.macro msa_restore_all thread
+ .set push
+ .set noat
+ lw $1, THREAD_MSA_CSR(\thread)
+ ctcmsa MSA_CSR, $1
+ .set pop
ld_d 0, THREAD_FPR0, \thread
ld_d 1, THREAD_FPR1, \thread
ld_d 2, THREAD_FPR2, \thread
@@ -415,4 +426,24 @@
ld_d 31, THREAD_FPR31, \thread
.endm
+ .macro msa_init_upper wd
+#ifdef CONFIG_64BIT
+ insert_d \wd, 1
+#else
+ insert_w \wd, 2
+ insert_w \wd, 3
+#endif
+ .if 31-\wd
+ msa_init_upper (\wd+1)
+ .endif
+ .endm
+
+ .macro msa_init_all_upper
+ .set push
+ .set noat
+ not $1, zero
+ msa_init_upper 0
+ .set pop
+ .endm
+
#endif /* _ASM_ASMMACRO_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 7c8816f..bae6b0f 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -559,7 +559,13 @@
int r;
if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
- __asm__("clz %0, %1" : "=r" (x) : "r" (x));
+ __asm__(
+ " .set push \n"
+ " .set mips32 \n"
+ " clz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (x)
+ : "r" (x));
return 32 - x;
}
diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h
index c1516cc..d035298 100644
--- a/arch/mips/include/asm/cop2.h
+++ b/arch/mips/include/asm/cop2.h
@@ -32,6 +32,14 @@
#define cop2_present 1
#define cop2_lazy_restore 0
+#elif defined(CONFIG_CPU_LOONGSON3)
+
+#define cop2_save(r)
+#define cop2_restore(r)
+
+#define cop2_present 1
+#define cop2_lazy_restore 1
+
#else
#define cop2_present 0
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index c7d8c99..e079598 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -29,6 +29,15 @@
#ifndef cpu_has_eva
#define cpu_has_eva (cpu_data[0].options & MIPS_CPU_EVA)
#endif
+#ifndef cpu_has_htw
+#define cpu_has_htw (cpu_data[0].options & MIPS_CPU_HTW)
+#endif
+#ifndef cpu_has_rixiex
+#define cpu_has_rixiex (cpu_data[0].options & MIPS_CPU_RIXIEX)
+#endif
+#ifndef cpu_has_maar
+#define cpu_has_maar (cpu_data[0].options & MIPS_CPU_MAAR)
+#endif
/*
* For the moment we don't consider R6000 and R8000 so we can assume that
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index 47d5967..d5f42c1 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -44,8 +44,8 @@
/*
* Capability and feature descriptor structure for MIPS CPU
*/
- unsigned long options;
unsigned long ases;
+ unsigned long long options;
unsigned int udelay_val;
unsigned int processor_id;
unsigned int fpu_id;
@@ -61,6 +61,7 @@
struct cache_desc scache; /* Secondary cache */
struct cache_desc tcache; /* Tertiary/split secondary cache */
int srsets; /* Shadow register sets */
+ int package;/* physical package number */
int core; /* physical core number */
#ifdef CONFIG_64BIT
int vmbits; /* Virtual memory size in bits */
@@ -115,7 +116,7 @@
#ifdef CONFIG_MIPS_MT_SMP
# define cpu_vpe_id(cpuinfo) ((cpuinfo)->vpe_id)
#else
-# define cpu_vpe_id(cpuinfo) 0
+# define cpu_vpe_id(cpuinfo) ({ (void)cpuinfo; 0; })
#endif
#endif /* __ASM_CPU_INFO_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 129d087..dfdc77e 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -233,6 +233,8 @@
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
#define PRID_REV_LOONGSON3A 0x0005
+#define PRID_REV_LOONGSON3B_R1 0x0006
+#define PRID_REV_LOONGSON3B_R2 0x0007
/*
* Older processors used to encode processor version and revision in two
@@ -335,34 +337,37 @@
/*
* CPU Option encodings
*/
-#define MIPS_CPU_TLB 0x00000001 /* CPU has TLB */
-#define MIPS_CPU_4KEX 0x00000002 /* "R4K" exception model */
-#define MIPS_CPU_3K_CACHE 0x00000004 /* R3000-style caches */
-#define MIPS_CPU_4K_CACHE 0x00000008 /* R4000-style caches */
-#define MIPS_CPU_TX39_CACHE 0x00000010 /* TX3900-style caches */
-#define MIPS_CPU_FPU 0x00000020 /* CPU has FPU */
-#define MIPS_CPU_32FPR 0x00000040 /* 32 dbl. prec. FP registers */
-#define MIPS_CPU_COUNTER 0x00000080 /* Cycle count/compare */
-#define MIPS_CPU_WATCH 0x00000100 /* watchpoint registers */
-#define MIPS_CPU_DIVEC 0x00000200 /* dedicated interrupt vector */
-#define MIPS_CPU_VCE 0x00000400 /* virt. coherence conflict possible */
-#define MIPS_CPU_CACHE_CDEX_P 0x00000800 /* Create_Dirty_Exclusive CACHE op */
-#define MIPS_CPU_CACHE_CDEX_S 0x00001000 /* ... same for seconary cache ... */
-#define MIPS_CPU_MCHECK 0x00002000 /* Machine check exception */
-#define MIPS_CPU_EJTAG 0x00004000 /* EJTAG exception */
-#define MIPS_CPU_NOFPUEX 0x00008000 /* no FPU exception */
-#define MIPS_CPU_LLSC 0x00010000 /* CPU has ll/sc instructions */
-#define MIPS_CPU_INCLUSIVE_CACHES 0x00020000 /* P-cache subset enforced */
-#define MIPS_CPU_PREFETCH 0x00040000 /* CPU has usable prefetch */
-#define MIPS_CPU_VINT 0x00080000 /* CPU supports MIPSR2 vectored interrupts */
-#define MIPS_CPU_VEIC 0x00100000 /* CPU supports MIPSR2 external interrupt controller mode */
-#define MIPS_CPU_ULRI 0x00200000 /* CPU has ULRI feature */
-#define MIPS_CPU_PCI 0x00400000 /* CPU has Perf Ctr Int indicator */
-#define MIPS_CPU_RIXI 0x00800000 /* CPU has TLB Read/eXec Inhibit */
-#define MIPS_CPU_MICROMIPS 0x01000000 /* CPU has microMIPS capability */
-#define MIPS_CPU_TLBINV 0x02000000 /* CPU supports TLBINV/F */
-#define MIPS_CPU_SEGMENTS 0x04000000 /* CPU supports Segmentation Control registers */
-#define MIPS_CPU_EVA 0x80000000 /* CPU supports Enhanced Virtual Addressing */
+#define MIPS_CPU_TLB 0x00000001ull /* CPU has TLB */
+#define MIPS_CPU_4KEX 0x00000002ull /* "R4K" exception model */
+#define MIPS_CPU_3K_CACHE 0x00000004ull /* R3000-style caches */
+#define MIPS_CPU_4K_CACHE 0x00000008ull /* R4000-style caches */
+#define MIPS_CPU_TX39_CACHE 0x00000010ull /* TX3900-style caches */
+#define MIPS_CPU_FPU 0x00000020ull /* CPU has FPU */
+#define MIPS_CPU_32FPR 0x00000040ull /* 32 dbl. prec. FP registers */
+#define MIPS_CPU_COUNTER 0x00000080ull /* Cycle count/compare */
+#define MIPS_CPU_WATCH 0x00000100ull /* watchpoint registers */
+#define MIPS_CPU_DIVEC 0x00000200ull /* dedicated interrupt vector */
+#define MIPS_CPU_VCE 0x00000400ull /* virt. coherence conflict possible */
+#define MIPS_CPU_CACHE_CDEX_P 0x00000800ull /* Create_Dirty_Exclusive CACHE op */
+#define MIPS_CPU_CACHE_CDEX_S 0x00001000ull /* ... same for seconary cache ... */
+#define MIPS_CPU_MCHECK 0x00002000ull /* Machine check exception */
+#define MIPS_CPU_EJTAG 0x00004000ull /* EJTAG exception */
+#define MIPS_CPU_NOFPUEX 0x00008000ull /* no FPU exception */
+#define MIPS_CPU_LLSC 0x00010000ull /* CPU has ll/sc instructions */
+#define MIPS_CPU_INCLUSIVE_CACHES 0x00020000ull /* P-cache subset enforced */
+#define MIPS_CPU_PREFETCH 0x00040000ull /* CPU has usable prefetch */
+#define MIPS_CPU_VINT 0x00080000ull /* CPU supports MIPSR2 vectored interrupts */
+#define MIPS_CPU_VEIC 0x00100000ull /* CPU supports MIPSR2 external interrupt controller mode */
+#define MIPS_CPU_ULRI 0x00200000ull /* CPU has ULRI feature */
+#define MIPS_CPU_PCI 0x00400000ull /* CPU has Perf Ctr Int indicator */
+#define MIPS_CPU_RIXI 0x00800000ull /* CPU has TLB Read/eXec Inhibit */
+#define MIPS_CPU_MICROMIPS 0x01000000ull /* CPU has microMIPS capability */
+#define MIPS_CPU_TLBINV 0x02000000ull /* CPU supports TLBINV/F */
+#define MIPS_CPU_SEGMENTS 0x04000000ull /* CPU supports Segmentation Control registers */
+#define MIPS_CPU_EVA 0x80000000ull /* CPU supports Enhanced Virtual Addressing */
+#define MIPS_CPU_HTW 0x100000000ull /* CPU support Hardware Page Table Walker */
+#define MIPS_CPU_RIXIEX 0x200000000ull /* CPU has unique exception codes for {Read, Execute}-Inhibit exceptions */
+#define MIPS_CPU_MAAR 0x400000000ull /* MAAR(I) registers are present */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index d414405..1d38fe0 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -339,23 +339,6 @@
#endif /* CONFIG_64BIT */
-struct pt_regs;
-struct task_struct;
-
-extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
-extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
-extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
-
-#ifndef ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(elf_regs, regs) \
- elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
-#endif
-#ifndef ELF_CORE_COPY_TASK_REGS
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-#endif
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \
- dump_task_fpu(tsk, elf_fpregs)
-
#define CORE_DUMP_USE_REGSET
#define ELF_EXEC_PAGESIZE PAGE_SIZE
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index a939574..4d0aeda 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -21,6 +21,7 @@
#include <asm/hazards.h>
#include <asm/processor.h>
#include <asm/current.h>
+#include <asm/msa.h>
#ifdef CONFIG_MIPS_MT_FPAFF
#include <asm/mips_mt.h>
@@ -141,13 +142,21 @@
static inline void lose_fpu(int save)
{
preempt_disable();
- if (is_fpu_owner()) {
+ if (is_msa_enabled()) {
+ if (save) {
+ save_msa(current);
+ asm volatile("cfc1 %0, $31"
+ : "=r"(current->thread.fpu.fcr31));
+ }
+ disable_msa();
+ clear_thread_flag(TIF_USEDMSA);
+ } else if (is_fpu_owner()) {
if (save)
_save_fp(current);
- KSTK_STATUS(current) &= ~ST0_CU1;
- clear_thread_flag(TIF_USEDFPU);
__disable_fpu();
}
+ KSTK_STATUS(current) &= ~ST0_CU1;
+ clear_thread_flag(TIF_USEDFPU);
preempt_enable();
}
@@ -155,8 +164,6 @@
{
int ret = 0;
- preempt_disable();
-
if (cpu_has_fpu) {
ret = __own_fpu();
if (!ret)
@@ -164,8 +171,6 @@
} else
fpu_emulator_init_fpu();
- preempt_enable();
-
return ret;
}
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 10f6a99..3f20b21 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -14,6 +14,8 @@
#include <linux/bitmap.h>
#include <linux/threads.h>
+#include <irq.h>
+
#undef GICISBYTELITTLEENDIAN
/* Constants */
@@ -22,8 +24,6 @@
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
-#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
-
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS)
@@ -43,18 +43,17 @@
#ifdef GICISBYTELITTLEENDIAN
#define GICREAD(reg, data) ((data) = (reg), (data) = le32_to_cpu(data))
#define GICWRITE(reg, data) ((reg) = cpu_to_le32(data))
-#define GICBIS(reg, bits) \
- ({unsigned int data; \
- GICREAD(reg, data); \
- data |= bits; \
- GICWRITE(reg, data); \
- })
-
#else
#define GICREAD(reg, data) ((data) = (reg))
#define GICWRITE(reg, data) ((reg) = (data))
-#define GICBIS(reg, bits) ((reg) |= (bits))
#endif
+#define GICBIS(reg, mask, bits) \
+ do { u32 data; \
+ GICREAD((reg), data); \
+ data &= ~(mask); \
+ data |= ((bits) & (mask)); \
+ GICWRITE((reg), data); \
+ } while (0)
/* GIC Address Space */
@@ -170,13 +169,15 @@
#define GIC_SH_SET_POLARITY_OFS 0x0100
#define GIC_SET_POLARITY(intr, pol) \
GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + \
- GIC_INTR_OFS(intr)), (pol) << GIC_INTR_BIT(intr))
+ GIC_INTR_OFS(intr)), (1 << GIC_INTR_BIT(intr)), \
+ (pol) << GIC_INTR_BIT(intr))
/* Triggering : Reset Value is always 0 */
#define GIC_SH_SET_TRIGGER_OFS 0x0180
#define GIC_SET_TRIGGER(intr, trig) \
GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + \
- GIC_INTR_OFS(intr)), (trig) << GIC_INTR_BIT(intr))
+ GIC_INTR_OFS(intr)), (1 << GIC_INTR_BIT(intr)), \
+ (trig) << GIC_INTR_BIT(intr))
/* Mask manipulation */
#define GIC_SH_SMASK_OFS 0x0380
@@ -306,18 +307,6 @@
GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \
GIC_SH_MAP_TO_VPE_REG_BIT(vpe))
-struct gic_pcpu_mask {
- DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS);
-};
-
-struct gic_pending_regs {
- DECLARE_BITMAP(pending, GIC_NUM_INTRS);
-};
-
-struct gic_intrmask_regs {
- DECLARE_BITMAP(intrmask, GIC_NUM_INTRS);
-};
-
/*
* Interrupt Meta-data specification. The ipiflag helps
* in building ipi_map.
@@ -329,8 +318,7 @@
unsigned int polarity; /* Polarity : +/- */
unsigned int trigtype; /* Trigger : Edge/Levl */
unsigned int flags; /* Misc flags */
-#define GIC_FLAG_IPI 0x01
-#define GIC_FLAG_TRANSPARENT 0x02
+#define GIC_FLAG_TRANSPARENT 0x01
};
/*
@@ -386,6 +374,7 @@
extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
extern void gic_bind_eic_interrupt(int irq, int set);
extern unsigned int gic_get_timer_pending(void);
+extern void gic_get_int_mask(unsigned long *dst, const unsigned long *src);
extern unsigned int gic_get_int(void);
extern void gic_enable_interrupt(int irq_vec);
extern void gic_disable_interrupt(int irq_vec);
diff --git a/arch/mips/include/asm/maar.h b/arch/mips/include/asm/maar.h
new file mode 100644
index 0000000..6c62b0f
--- /dev/null
+++ b/arch/mips/include/asm/maar.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MIPS_MAAR_H__
+#define __MIPS_ASM_MIPS_MAAR_H__
+
+#include <asm/hazards.h>
+#include <asm/mipsregs.h>
+
+/**
+ * platform_maar_init() - perform platform-level MAAR configuration
+ * @num_pairs: The number of MAAR pairs present in the system.
+ *
+ * Platforms should implement this function such that it configures as many
+ * MAAR pairs as required, from 0 up to the maximum of num_pairs-1, and returns
+ * the number that were used. Any further MAARs will be configured to be
+ * invalid. The default implementation of this function will simply indicate
+ * that it has configured 0 MAAR pairs.
+ *
+ * Return: The number of MAAR pairs configured.
+ */
+unsigned __weak platform_maar_init(unsigned num_pairs);
+
+/**
+ * write_maar_pair() - write to a pair of MAARs
+ * @idx: The index of the pair (ie. use MAARs idx*2 & (idx*2)+1).
+ * @lower: The lowest address that the MAAR pair will affect. Must be
+ * aligned to a 2^16 byte boundary.
+ * @upper: The highest address that the MAAR pair will affect. Must be
+ * aligned to one byte before a 2^16 byte boundary.
+ * @attrs: The accessibility attributes to program, eg. MIPS_MAAR_S. The
+ * MIPS_MAAR_V attribute will automatically be set.
+ *
+ * Program the pair of MAAR registers specified by idx to apply the attributes
+ * specified by attrs to the range of addresses from lower to higher.
+ */
+static inline void write_maar_pair(unsigned idx, phys_addr_t lower,
+ phys_addr_t upper, unsigned attrs)
+{
+ /* Addresses begin at bit 16, but are shifted right 4 bits */
+ BUG_ON(lower & (0xffff | ~(MIPS_MAAR_ADDR << 4)));
+ BUG_ON(((upper & 0xffff) != 0xffff)
+ || ((upper & ~0xffffull) & ~(MIPS_MAAR_ADDR << 4)));
+
+ /* Automatically set MIPS_MAAR_V */
+ attrs |= MIPS_MAAR_V;
+
+ /* Write the upper address & attributes (only MIPS_MAAR_V matters) */
+ write_c0_maari(idx << 1);
+ back_to_back_c0_hazard();
+ write_c0_maar(((upper >> 4) & MIPS_MAAR_ADDR) | attrs);
+ back_to_back_c0_hazard();
+
+ /* Write the lower address & attributes */
+ write_c0_maari((idx << 1) | 0x1);
+ back_to_back_c0_hazard();
+ write_c0_maar((lower >> 4) | attrs);
+ back_to_back_c0_hazard();
+}
+
+/**
+ * struct maar_config - MAAR configuration data
+ * @lower: The lowest address that the MAAR pair will affect. Must be
+ * aligned to a 2^16 byte boundary.
+ * @upper: The highest address that the MAAR pair will affect. Must be
+ * aligned to one byte before a 2^16 byte boundary.
+ * @attrs: The accessibility attributes to program, eg. MIPS_MAAR_S. The
+ * MIPS_MAAR_V attribute will automatically be set.
+ *
+ * Describes the configuration of a pair of Memory Accessibility Attribute
+ * Registers - applying attributes from attrs to the range of physical
+ * addresses from lower to upper inclusive.
+ */
+struct maar_config {
+ phys_addr_t lower;
+ phys_addr_t upper;
+ unsigned attrs;
+};
+
+/**
+ * maar_config() - configure MAARs according to provided data
+ * @cfg: Pointer to an array of struct maar_config.
+ * @num_cfg: The number of structs in the cfg array.
+ * @num_pairs: The number of MAAR pairs present in the system.
+ *
+ * Configures as many MAARs as are present and specified in the cfg
+ * array with the values taken from the cfg array.
+ *
+ * Return: The number of MAAR pairs configured.
+ */
+static inline unsigned maar_config(const struct maar_config *cfg,
+ unsigned num_cfg, unsigned num_pairs)
+{
+ unsigned i;
+
+ for (i = 0; i < min(num_cfg, num_pairs); i++)
+ write_maar_pair(i, cfg[i].lower, cfg[i].upper, cfg[i].attrs);
+
+ return i;
+}
+
+#endif /* __MIPS_ASM_MIPS_MAAR_H__ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index b4c3ecb..a7eec33 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -34,6 +34,558 @@
#ifndef _AU1000_H_
#define _AU1000_H_
+/* SOC Interrupt numbers */
+/* Au1000-style (IC0/1): 2 controllers with 32 sources each */
+#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1)
+#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
+#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
+
+/* Au1300-style (GPIC): 1 controller with up to 128 sources */
+#define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
+#define ALCHEMY_GPIC_INT_NUM 128
+#define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1)
+
+/* common clock names, shared among all variants. AUXPLL2 is Au1300 */
+#define ALCHEMY_ROOT_CLK "root_clk"
+#define ALCHEMY_CPU_CLK "cpu_clk"
+#define ALCHEMY_AUXPLL_CLK "auxpll_clk"
+#define ALCHEMY_AUXPLL2_CLK "auxpll2_clk"
+#define ALCHEMY_SYSBUS_CLK "sysbus_clk"
+#define ALCHEMY_PERIPH_CLK "periph_clk"
+#define ALCHEMY_MEM_CLK "mem_clk"
+#define ALCHEMY_LR_CLK "lr_clk"
+#define ALCHEMY_FG0_CLK "fg0_clk"
+#define ALCHEMY_FG1_CLK "fg1_clk"
+#define ALCHEMY_FG2_CLK "fg2_clk"
+#define ALCHEMY_FG3_CLK "fg3_clk"
+#define ALCHEMY_FG4_CLK "fg4_clk"
+#define ALCHEMY_FG5_CLK "fg5_clk"
+
+/* Au1300 peripheral interrupt numbers */
+#define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE)
+#define AU1300_UART1_INT (AU1300_FIRST_INT + 17)
+#define AU1300_UART2_INT (AU1300_FIRST_INT + 25)
+#define AU1300_UART3_INT (AU1300_FIRST_INT + 27)
+#define AU1300_SD1_INT (AU1300_FIRST_INT + 32)
+#define AU1300_SD2_INT (AU1300_FIRST_INT + 38)
+#define AU1300_PSC0_INT (AU1300_FIRST_INT + 48)
+#define AU1300_PSC1_INT (AU1300_FIRST_INT + 52)
+#define AU1300_PSC2_INT (AU1300_FIRST_INT + 56)
+#define AU1300_PSC3_INT (AU1300_FIRST_INT + 60)
+#define AU1300_NAND_INT (AU1300_FIRST_INT + 62)
+#define AU1300_DDMA_INT (AU1300_FIRST_INT + 75)
+#define AU1300_MMU_INT (AU1300_FIRST_INT + 76)
+#define AU1300_MPU_INT (AU1300_FIRST_INT + 77)
+#define AU1300_GPU_INT (AU1300_FIRST_INT + 78)
+#define AU1300_UDMA_INT (AU1300_FIRST_INT + 79)
+#define AU1300_TOY_INT (AU1300_FIRST_INT + 80)
+#define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81)
+#define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82)
+#define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83)
+#define AU1300_RTC_INT (AU1300_FIRST_INT + 84)
+#define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85)
+#define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86)
+#define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87)
+#define AU1300_UART0_INT (AU1300_FIRST_INT + 88)
+#define AU1300_SD0_INT (AU1300_FIRST_INT + 89)
+#define AU1300_USB_INT (AU1300_FIRST_INT + 90)
+#define AU1300_LCD_INT (AU1300_FIRST_INT + 91)
+#define AU1300_BSA_INT (AU1300_FIRST_INT + 92)
+#define AU1300_MPE_INT (AU1300_FIRST_INT + 93)
+#define AU1300_ITE_INT (AU1300_FIRST_INT + 94)
+#define AU1300_AES_INT (AU1300_FIRST_INT + 95)
+#define AU1300_CIM_INT (AU1300_FIRST_INT + 96)
+
+/**********************************************************************/
+
+/*
+ * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300
+ */
+
+#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
+#define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */
+#define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */
+#define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */
+#define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */
+#define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */
+#define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */
+#define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */
+#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */
+#define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */
+#define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */
+#define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */
+#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
+#define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */
+#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */
+#define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */
+#define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */
+#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
+#define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */
+#define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */
+#define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */
+#define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */
+#define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */
+#define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */
+#define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */
+#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
+#define AU1200_SWCNT_PHYS_ADDR 0x1110010C /* 4 */
+#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
+#define AU1000_SSI0_PHYS_ADDR 0x11600000 /* 02 */
+#define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */
+#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */
+#define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */
+#define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */
+#define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */
+#define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */
+#define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */
+#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */
+#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
+#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */
+#define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */
+#define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */
+#define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */
+#define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */
+#define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */
+#define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */
+#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */
+#define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */
+#define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */
+#define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */
+#define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */
+#define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */
+#define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */
+#define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */
+#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */
+#define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */
+#define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */
+#define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */
+#define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */
+
+/**********************************************************************/
+
+
+/*
+ * Au1300 GPIO+INT controller (GPIC) register offsets and bits
+ * Registers are 128bits (0x10 bytes), divided into 4 "banks".
+ */
+#define AU1300_GPIC_PINVAL 0x0000
+#define AU1300_GPIC_PINVALCLR 0x0010
+#define AU1300_GPIC_IPEND 0x0020
+#define AU1300_GPIC_PRIENC 0x0030
+#define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */
+#define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */
+#define AU1300_GPIC_DMASEL 0x0060
+#define AU1300_GPIC_DEVSEL 0x0080
+#define AU1300_GPIC_DEVCLR 0x0090
+#define AU1300_GPIC_RSTVAL 0x00a0
+/* pin configuration space. one 32bit register for up to 128 IRQs */
+#define AU1300_GPIC_PINCFG 0x1000
+
+#define GPIC_GPIO_TO_BIT(gpio) \
+ (1 << ((gpio) & 0x1f))
+
+#define GPIC_GPIO_BANKOFF(gpio) \
+ (((gpio) >> 5) * 4)
+
+/* Pin Control bits: who owns the pin, what does it do */
+#define GPIC_CFG_PC_GPIN 0
+#define GPIC_CFG_PC_DEV 1
+#define GPIC_CFG_PC_GPOLOW 2
+#define GPIC_CFG_PC_GPOHIGH 3
+#define GPIC_CFG_PC_MASK 3
+
+/* assign pin to MIPS IRQ line */
+#define GPIC_CFG_IL_SET(x) (((x) & 3) << 2)
+#define GPIC_CFG_IL_MASK (3 << 2)
+
+/* pin interrupt type setup */
+#define GPIC_CFG_IC_OFF (0 << 4)
+#define GPIC_CFG_IC_LEVEL_LOW (1 << 4)
+#define GPIC_CFG_IC_LEVEL_HIGH (2 << 4)
+#define GPIC_CFG_IC_EDGE_FALL (5 << 4)
+#define GPIC_CFG_IC_EDGE_RISE (6 << 4)
+#define GPIC_CFG_IC_EDGE_BOTH (7 << 4)
+#define GPIC_CFG_IC_MASK (7 << 4)
+
+/* allow interrupt to wake cpu from 'wait' */
+#define GPIC_CFG_IDLEWAKE (1 << 7)
+
+/***********************************************************************/
+
+/* Au1000 SDRAM memory controller register offsets */
+#define AU1000_MEM_SDMODE0 0x0000
+#define AU1000_MEM_SDMODE1 0x0004
+#define AU1000_MEM_SDMODE2 0x0008
+#define AU1000_MEM_SDADDR0 0x000C
+#define AU1000_MEM_SDADDR1 0x0010
+#define AU1000_MEM_SDADDR2 0x0014
+#define AU1000_MEM_SDREFCFG 0x0018
+#define AU1000_MEM_SDPRECMD 0x001C
+#define AU1000_MEM_SDAUTOREF 0x0020
+#define AU1000_MEM_SDWRMD0 0x0024
+#define AU1000_MEM_SDWRMD1 0x0028
+#define AU1000_MEM_SDWRMD2 0x002C
+#define AU1000_MEM_SDSLEEP 0x0030
+#define AU1000_MEM_SDSMCKE 0x0034
+
+/* MEM_SDMODE register content definitions */
+#define MEM_SDMODE_F (1 << 22)
+#define MEM_SDMODE_SR (1 << 21)
+#define MEM_SDMODE_BS (1 << 20)
+#define MEM_SDMODE_RS (3 << 18)
+#define MEM_SDMODE_CS (7 << 15)
+#define MEM_SDMODE_TRAS (15 << 11)
+#define MEM_SDMODE_TMRD (3 << 9)
+#define MEM_SDMODE_TWR (3 << 7)
+#define MEM_SDMODE_TRP (3 << 5)
+#define MEM_SDMODE_TRCD (3 << 3)
+#define MEM_SDMODE_TCL (7 << 0)
+
+#define MEM_SDMODE_BS_2Bank (0 << 20)
+#define MEM_SDMODE_BS_4Bank (1 << 20)
+#define MEM_SDMODE_RS_11Row (0 << 18)
+#define MEM_SDMODE_RS_12Row (1 << 18)
+#define MEM_SDMODE_RS_13Row (2 << 18)
+#define MEM_SDMODE_RS_N(N) ((N) << 18)
+#define MEM_SDMODE_CS_7Col (0 << 15)
+#define MEM_SDMODE_CS_8Col (1 << 15)
+#define MEM_SDMODE_CS_9Col (2 << 15)
+#define MEM_SDMODE_CS_10Col (3 << 15)
+#define MEM_SDMODE_CS_11Col (4 << 15)
+#define MEM_SDMODE_CS_N(N) ((N) << 15)
+#define MEM_SDMODE_TRAS_N(N) ((N) << 11)
+#define MEM_SDMODE_TMRD_N(N) ((N) << 9)
+#define MEM_SDMODE_TWR_N(N) ((N) << 7)
+#define MEM_SDMODE_TRP_N(N) ((N) << 5)
+#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
+#define MEM_SDMODE_TCL_N(N) ((N) << 0)
+
+/* MEM_SDADDR register contents definitions */
+#define MEM_SDADDR_E (1 << 20)
+#define MEM_SDADDR_CSBA (0x03FF << 10)
+#define MEM_SDADDR_CSMASK (0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
+
+/* MEM_SDREFCFG register content definitions */
+#define MEM_SDREFCFG_TRC (15 << 28)
+#define MEM_SDREFCFG_TRPM (3 << 26)
+#define MEM_SDREFCFG_E (1 << 25)
+#define MEM_SDREFCFG_RE (0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N) (N)
+
+/* Au1550 SDRAM Register Offsets */
+#define AU1550_MEM_SDMODE0 0x0800
+#define AU1550_MEM_SDMODE1 0x0808
+#define AU1550_MEM_SDMODE2 0x0810
+#define AU1550_MEM_SDADDR0 0x0820
+#define AU1550_MEM_SDADDR1 0x0828
+#define AU1550_MEM_SDADDR2 0x0830
+#define AU1550_MEM_SDCONFIGA 0x0840
+#define AU1550_MEM_SDCONFIGB 0x0848
+#define AU1550_MEM_SDSTAT 0x0850
+#define AU1550_MEM_SDERRADDR 0x0858
+#define AU1550_MEM_SDSTRIDE0 0x0860
+#define AU1550_MEM_SDSTRIDE1 0x0868
+#define AU1550_MEM_SDSTRIDE2 0x0870
+#define AU1550_MEM_SDWRMD0 0x0880
+#define AU1550_MEM_SDWRMD1 0x0888
+#define AU1550_MEM_SDWRMD2 0x0890
+#define AU1550_MEM_SDPRECMD 0x08C0
+#define AU1550_MEM_SDAUTOREF 0x08C8
+#define AU1550_MEM_SDSREF 0x08D0
+#define AU1550_MEM_SDSLEEP MEM_SDSREF
+
+/* Static Bus Controller register offsets */
+#define AU1000_MEM_STCFG0 0x000
+#define AU1000_MEM_STTIME0 0x004
+#define AU1000_MEM_STADDR0 0x008
+#define AU1000_MEM_STCFG1 0x010
+#define AU1000_MEM_STTIME1 0x014
+#define AU1000_MEM_STADDR1 0x018
+#define AU1000_MEM_STCFG2 0x020
+#define AU1000_MEM_STTIME2 0x024
+#define AU1000_MEM_STADDR2 0x028
+#define AU1000_MEM_STCFG3 0x030
+#define AU1000_MEM_STTIME3 0x034
+#define AU1000_MEM_STADDR3 0x038
+#define AU1000_MEM_STNDCTL 0x100
+#define AU1000_MEM_STSTAT 0x104
+
+#define MEM_STNAND_CMD 0x0
+#define MEM_STNAND_ADDR 0x4
+#define MEM_STNAND_DATA 0x20
+
+
+/* Programmable Counters 0 and 1 */
+#define AU1000_SYS_CNTRCTRL 0x14
+# define SYS_CNTRL_E1S (1 << 23)
+# define SYS_CNTRL_T1S (1 << 20)
+# define SYS_CNTRL_M21 (1 << 19)
+# define SYS_CNTRL_M11 (1 << 18)
+# define SYS_CNTRL_M01 (1 << 17)
+# define SYS_CNTRL_C1S (1 << 16)
+# define SYS_CNTRL_BP (1 << 14)
+# define SYS_CNTRL_EN1 (1 << 13)
+# define SYS_CNTRL_BT1 (1 << 12)
+# define SYS_CNTRL_EN0 (1 << 11)
+# define SYS_CNTRL_BT0 (1 << 10)
+# define SYS_CNTRL_E0 (1 << 8)
+# define SYS_CNTRL_E0S (1 << 7)
+# define SYS_CNTRL_32S (1 << 5)
+# define SYS_CNTRL_T0S (1 << 4)
+# define SYS_CNTRL_M20 (1 << 3)
+# define SYS_CNTRL_M10 (1 << 2)
+# define SYS_CNTRL_M00 (1 << 1)
+# define SYS_CNTRL_C0S (1 << 0)
+
+/* Programmable Counter 0 Registers */
+#define AU1000_SYS_TOYTRIM 0x00
+#define AU1000_SYS_TOYWRITE 0x04
+#define AU1000_SYS_TOYMATCH0 0x08
+#define AU1000_SYS_TOYMATCH1 0x0c
+#define AU1000_SYS_TOYMATCH2 0x10
+#define AU1000_SYS_TOYREAD 0x40
+
+/* Programmable Counter 1 Registers */
+#define AU1000_SYS_RTCTRIM 0x44
+#define AU1000_SYS_RTCWRITE 0x48
+#define AU1000_SYS_RTCMATCH0 0x4c
+#define AU1000_SYS_RTCMATCH1 0x50
+#define AU1000_SYS_RTCMATCH2 0x54
+#define AU1000_SYS_RTCREAD 0x58
+
+
+/* GPIO */
+#define AU1000_SYS_PINFUNC 0x2C
+# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */
+# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */
+# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */
+# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */
+# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */
+# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */
+# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */
+# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */
+# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */
+# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */
+# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */
+# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */
+# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */
+# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */
+# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */
+# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */
+
+/* Au1100 only */
+# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */
+# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */
+# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */
+# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */
+
+/* Au1550 only. Redefines lots of pins */
+# define SYS_PF_PSC2_MASK (7 << 17)
+# define SYS_PF_PSC2_AC97 0
+# define SYS_PF_PSC2_SPI 0
+# define SYS_PF_PSC2_I2S (1 << 17)
+# define SYS_PF_PSC2_SMBUS (3 << 17)
+# define SYS_PF_PSC2_GPIO (7 << 17)
+# define SYS_PF_PSC3_MASK (7 << 20)
+# define SYS_PF_PSC3_AC97 0
+# define SYS_PF_PSC3_SPI 0
+# define SYS_PF_PSC3_I2S (1 << 20)
+# define SYS_PF_PSC3_SMBUS (3 << 20)
+# define SYS_PF_PSC3_GPIO (7 << 20)
+# define SYS_PF_PSC1_S1 (1 << 1)
+# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+
+/* Au1200 only */
+#define SYS_PINFUNC_DMA (1 << 31)
+#define SYS_PINFUNC_S0A (1 << 30)
+#define SYS_PINFUNC_S1A (1 << 29)
+#define SYS_PINFUNC_LP0 (1 << 28)
+#define SYS_PINFUNC_LP1 (1 << 27)
+#define SYS_PINFUNC_LD16 (1 << 26)
+#define SYS_PINFUNC_LD8 (1 << 25)
+#define SYS_PINFUNC_LD1 (1 << 24)
+#define SYS_PINFUNC_LD0 (1 << 23)
+#define SYS_PINFUNC_P1A (3 << 21)
+#define SYS_PINFUNC_P1B (1 << 20)
+#define SYS_PINFUNC_FS3 (1 << 19)
+#define SYS_PINFUNC_P0A (3 << 17)
+#define SYS_PINFUNC_CS (1 << 16)
+#define SYS_PINFUNC_CIM (1 << 15)
+#define SYS_PINFUNC_P1C (1 << 14)
+#define SYS_PINFUNC_U1T (1 << 12)
+#define SYS_PINFUNC_U1R (1 << 11)
+#define SYS_PINFUNC_EX1 (1 << 10)
+#define SYS_PINFUNC_EX0 (1 << 9)
+#define SYS_PINFUNC_U0R (1 << 8)
+#define SYS_PINFUNC_MC (1 << 7)
+#define SYS_PINFUNC_S0B (1 << 6)
+#define SYS_PINFUNC_S0C (1 << 5)
+#define SYS_PINFUNC_P0B (1 << 4)
+#define SYS_PINFUNC_U0T (1 << 3)
+#define SYS_PINFUNC_S1B (1 << 2)
+
+/* Power Management */
+#define AU1000_SYS_SCRATCH0 0x18
+#define AU1000_SYS_SCRATCH1 0x1c
+#define AU1000_SYS_WAKEMSK 0x34
+#define AU1000_SYS_ENDIAN 0x38
+#define AU1000_SYS_POWERCTRL 0x3c
+#define AU1000_SYS_WAKESRC 0x5c
+#define AU1000_SYS_SLPPWR 0x78
+#define AU1000_SYS_SLEEP 0x7c
+
+#define SYS_WAKEMSK_D2 (1 << 9)
+#define SYS_WAKEMSK_M2 (1 << 8)
+#define SYS_WAKEMSK_GPIO(x) (1 << (x))
+
+/* Clock Controller */
+#define AU1000_SYS_FREQCTRL0 0x20
+#define AU1000_SYS_FREQCTRL1 0x24
+#define AU1000_SYS_CLKSRC 0x28
+#define AU1000_SYS_CPUPLL 0x60
+#define AU1000_SYS_AUXPLL 0x64
+#define AU1300_SYS_AUXPLL2 0x68
+
+
+/**********************************************************************/
+
+
+/* The PCI chip selects are outside the 32bit space, and since we can't
+ * just program the 36bit addresses into BARs, we have to take a chunk
+ * out of the 32bit space and reserve it for PCI. When these addresses
+ * are ioremap()ed, they'll be fixed up to the real 36bit address before
+ * being passed to the real ioremap function.
+ */
+#define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4)
+#define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
+
+/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
+ * adjust the device's resources.
+ */
+#define ALCHEMY_PCI_IOWIN_START 0x00001000
+#define ALCHEMY_PCI_IOWIN_END 0x0000FFFF
+
+#ifdef CONFIG_PCI
+
+#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xfffffffffULL
+
+#else
+
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xfffffffffULL
+
+#endif
+
+/* PCI controller block register offsets */
+#define PCI_REG_CMEM 0x0000
+#define PCI_REG_CONFIG 0x0004
+#define PCI_REG_B2BMASK_CCH 0x0008
+#define PCI_REG_B2BBASE0_VID 0x000C
+#define PCI_REG_B2BBASE1_SID 0x0010
+#define PCI_REG_MWMASK_DEV 0x0014
+#define PCI_REG_MWBASE_REV_CCL 0x0018
+#define PCI_REG_ERR_ADDR 0x001C
+#define PCI_REG_SPEC_INTACK 0x0020
+#define PCI_REG_ID 0x0100
+#define PCI_REG_STATCMD 0x0104
+#define PCI_REG_CLASSREV 0x0108
+#define PCI_REG_PARAM 0x010C
+#define PCI_REG_MBAR 0x0110
+#define PCI_REG_TIMEOUT 0x0140
+
+/* PCI controller block register bits */
+#define PCI_CMEM_E (1 << 28) /* enable cacheable memory */
+#define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14)
+#define PCI_CMEM_CMMASK(x) ((x) & 0x3fff)
+#define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */
+#define PCI_CONFIG_ET (1 << 26) /* error in target mode */
+#define PCI_CONFIG_EF (1 << 25) /* fatal error */
+#define PCI_CONFIG_EP (1 << 24) /* parity error */
+#define PCI_CONFIG_EM (1 << 23) /* multiple errors */
+#define PCI_CONFIG_BM (1 << 22) /* bad master error */
+#define PCI_CONFIG_PD (1 << 20) /* PCI Disable */
+#define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */
+#define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */
+#define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */
+#define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */
+#define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */
+#define PCI_CONFIG_IMM (1 << 11) /* int on master abort */
+#define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */
+#define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */
+#define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */
+#define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */
+#define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */
+#define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */
+#define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */
+#define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */
+#define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */
+#define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */
+#define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */
+#define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */
+#define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */
+#define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16)
+#define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */
+#define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16)
+#define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff)
+#define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16)
+#define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff)
+#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
+#define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff)
+#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
+#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8)
+#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff)
+#define PCI_ID_DID(x) (((x) & 0xffff) << 16)
+#define PCI_ID_VID(x) ((x) & 0xffff)
+#define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16)
+#define PCI_STATCMD_CMD(x) ((x) & 0xffff)
+#define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8)
+#define PCI_CLASSREV_REV(x) ((x) & 0xff)
+#define PCI_PARAM_BIST(x) (((x) & 0xff) << 24)
+#define PCI_PARAM_HT(x) (((x) & 0xff) << 16)
+#define PCI_PARAM_LT(x) (((x) & 0xff) << 8)
+#define PCI_PARAM_CLS(x) ((x) & 0xff)
+#define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */
+#define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */
+
+
+/**********************************************************************/
+
#ifndef _LANGUAGE_ASSEMBLY
@@ -45,52 +597,36 @@
#include <asm/cpu.h>
-/* cpu pipeline flush */
-void static inline au_sync(void)
+/* helpers to access the SYS_* registers */
+static inline unsigned long alchemy_rdsys(int regofs)
{
- __asm__ volatile ("sync");
+ void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+
+ return __raw_readl(b + regofs);
}
-void static inline au_sync_udelay(int us)
+static inline void alchemy_wrsys(unsigned long v, int regofs)
{
- __asm__ volatile ("sync");
- udelay(us);
+ void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+
+ __raw_writel(v, b + regofs);
+ wmb(); /* drain writebuffer */
}
-void static inline au_sync_delay(int ms)
+/* helpers to access static memctrl registers */
+static inline unsigned long alchemy_rdsmem(int regofs)
{
- __asm__ volatile ("sync");
- mdelay(ms);
+ void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+
+ return __raw_readl(b + regofs);
}
-void static inline au_writeb(u8 val, unsigned long reg)
+static inline void alchemy_wrsmem(unsigned long v, int regofs)
{
- *(volatile u8 *)reg = val;
-}
+ void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
-void static inline au_writew(u16 val, unsigned long reg)
-{
- *(volatile u16 *)reg = val;
-}
-
-void static inline au_writel(u32 val, unsigned long reg)
-{
- *(volatile u32 *)reg = val;
-}
-
-static inline u8 au_readb(unsigned long reg)
-{
- return *(volatile u8 *)reg;
-}
-
-static inline u16 au_readw(unsigned long reg)
-{
- return *(volatile u16 *)reg;
-}
-
-static inline u32 au_readl(unsigned long reg)
-{
- return *(volatile u32 *)reg;
+ __raw_writel(v, b + regofs);
+ wmb(); /* drain writebuffer */
}
/* Early Au1000 have a write-only SYS_CPUPLL register. */
@@ -192,19 +728,20 @@
/* reset, enable clock, deassert reset */
if ((__raw_readl(addr + 0x100) & 3) != 3) {
__raw_writel(0, addr + 0x100);
- wmb();
+ wmb(); /* drain writebuffer */
__raw_writel(1, addr + 0x100);
- wmb();
+ wmb(); /* drain writebuffer */
}
__raw_writel(3, addr + 0x100);
- wmb();
+ wmb(); /* drain writebuffer */
}
static inline void alchemy_uart_disable(u32 uart_phys)
{
void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+
__raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */
- wmb();
+ wmb(); /* drain writebuffer */
}
static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
@@ -223,7 +760,7 @@
} while (--timeout);
__raw_writel(c, base + 0x04); /* tx */
- wmb();
+ wmb(); /* drain writebuffer */
}
/* return number of ethernet MACs on a given cputype */
@@ -240,20 +777,13 @@
return 0;
}
-/* arch/mips/au1000/common/clocks.c */
-extern void set_au1x00_speed(unsigned int new_freq);
-extern unsigned int get_au1x00_speed(void);
-extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
-extern unsigned long get_au1x00_uart_baud_base(void);
-extern unsigned long au1xxx_calc_clock(void);
-
/* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
void alchemy_sleep_au1000(void);
void alchemy_sleep_au1550(void);
void alchemy_sleep_au1300(void);
void au_sleep(void);
-/* USB: drivers/usb/host/alchemy-common.c */
+/* USB: arch/mips/alchemy/common/usb.c */
enum alchemy_usb_block {
ALCHEMY_USB_OHCI0,
ALCHEMY_USB_UDC0,
@@ -272,6 +802,20 @@
unsigned long pci_cfg_clr;
};
+/* The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's
+ * not used to select FIR/SIR mode on the transceiver but as a GPIO.
+ * Instead a CPLD has to be told about the mode. The driver calls the
+ * set_phy_mode() function in addition to driving the IRFIRSEL pin.
+ */
+#define AU1000_IRDA_PHY_MODE_OFF 0
+#define AU1000_IRDA_PHY_MODE_SIR 1
+#define AU1000_IRDA_PHY_MODE_FIR 2
+
+struct au1k_irda_platform_data {
+ void (*set_phy_mode)(int mode);
+};
+
+
/* Multifunction pins: Each of these pins can either be assigned to the
* GPIO controller or a on-chip peripheral.
* Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to
@@ -344,20 +888,6 @@
extern void au1300_vss_block_control(int block, int enable);
-
-/* SOC Interrupt numbers */
-/* Au1000-style (IC0/1): 2 controllers with 32 sources each */
-#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
-#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
-#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1)
-#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
-#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
-
-/* Au1300-style (GPIC): 1 controller with up to 128 sources */
-#define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
-#define ALCHEMY_GPIC_INT_NUM 128
-#define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1)
-
enum soc_au1000_ints {
AU1000_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1000_UART0_INT = AU1000_FIRST_INT,
@@ -678,885 +1208,4 @@
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
-/* Au1300 peripheral interrupt numbers */
-#define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE)
-#define AU1300_UART1_INT (AU1300_FIRST_INT + 17)
-#define AU1300_UART2_INT (AU1300_FIRST_INT + 25)
-#define AU1300_UART3_INT (AU1300_FIRST_INT + 27)
-#define AU1300_SD1_INT (AU1300_FIRST_INT + 32)
-#define AU1300_SD2_INT (AU1300_FIRST_INT + 38)
-#define AU1300_PSC0_INT (AU1300_FIRST_INT + 48)
-#define AU1300_PSC1_INT (AU1300_FIRST_INT + 52)
-#define AU1300_PSC2_INT (AU1300_FIRST_INT + 56)
-#define AU1300_PSC3_INT (AU1300_FIRST_INT + 60)
-#define AU1300_NAND_INT (AU1300_FIRST_INT + 62)
-#define AU1300_DDMA_INT (AU1300_FIRST_INT + 75)
-#define AU1300_MMU_INT (AU1300_FIRST_INT + 76)
-#define AU1300_MPU_INT (AU1300_FIRST_INT + 77)
-#define AU1300_GPU_INT (AU1300_FIRST_INT + 78)
-#define AU1300_UDMA_INT (AU1300_FIRST_INT + 79)
-#define AU1300_TOY_INT (AU1300_FIRST_INT + 80)
-#define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81)
-#define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82)
-#define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83)
-#define AU1300_RTC_INT (AU1300_FIRST_INT + 84)
-#define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85)
-#define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86)
-#define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87)
-#define AU1300_UART0_INT (AU1300_FIRST_INT + 88)
-#define AU1300_SD0_INT (AU1300_FIRST_INT + 89)
-#define AU1300_USB_INT (AU1300_FIRST_INT + 90)
-#define AU1300_LCD_INT (AU1300_FIRST_INT + 91)
-#define AU1300_BSA_INT (AU1300_FIRST_INT + 92)
-#define AU1300_MPE_INT (AU1300_FIRST_INT + 93)
-#define AU1300_ITE_INT (AU1300_FIRST_INT + 94)
-#define AU1300_AES_INT (AU1300_FIRST_INT + 95)
-#define AU1300_CIM_INT (AU1300_FIRST_INT + 96)
-
-/**********************************************************************/
-
-/*
- * Physical base addresses for integrated peripherals
- * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300
- */
-
-#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
-#define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */
-#define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */
-#define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */
-#define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */
-#define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */
-#define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */
-#define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */
-#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */
-#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */
-#define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */
-#define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */
-#define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */
-#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
-#define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */
-#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
-#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
-#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
-#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */
-#define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */
-#define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */
-#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
-#define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */
-#define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */
-#define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */
-#define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */
-#define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */
-#define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */
-#define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */
-#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
-#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
-#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
-#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
-#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
-#define AU1200_SWCNT_PHYS_ADDR 0x1110010C /* 4 */
-#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
-#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
-#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
-#define AU1000_SSI0_PHYS_ADDR 0x11600000 /* 02 */
-#define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */
-#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
-#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
-#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */
-#define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */
-#define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */
-#define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */
-#define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */
-#define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */
-#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
-#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */
-#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */
-#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
-#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
-#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */
-#define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */
-#define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */
-#define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */
-#define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */
-#define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */
-#define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */
-#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */
-#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */
-#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */
-#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */
-#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */
-#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */
-#define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */
-#define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */
-#define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */
-#define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */
-#define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */
-#define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */
-#define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */
-#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */
-#define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */
-#define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */
-#define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */
-#define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */
-#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */
-#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */
-#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */
-
-/**********************************************************************/
-
-
-/*
- * Au1300 GPIO+INT controller (GPIC) register offsets and bits
- * Registers are 128bits (0x10 bytes), divided into 4 "banks".
- */
-#define AU1300_GPIC_PINVAL 0x0000
-#define AU1300_GPIC_PINVALCLR 0x0010
-#define AU1300_GPIC_IPEND 0x0020
-#define AU1300_GPIC_PRIENC 0x0030
-#define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */
-#define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */
-#define AU1300_GPIC_DMASEL 0x0060
-#define AU1300_GPIC_DEVSEL 0x0080
-#define AU1300_GPIC_DEVCLR 0x0090
-#define AU1300_GPIC_RSTVAL 0x00a0
-/* pin configuration space. one 32bit register for up to 128 IRQs */
-#define AU1300_GPIC_PINCFG 0x1000
-
-#define GPIC_GPIO_TO_BIT(gpio) \
- (1 << ((gpio) & 0x1f))
-
-#define GPIC_GPIO_BANKOFF(gpio) \
- (((gpio) >> 5) * 4)
-
-/* Pin Control bits: who owns the pin, what does it do */
-#define GPIC_CFG_PC_GPIN 0
-#define GPIC_CFG_PC_DEV 1
-#define GPIC_CFG_PC_GPOLOW 2
-#define GPIC_CFG_PC_GPOHIGH 3
-#define GPIC_CFG_PC_MASK 3
-
-/* assign pin to MIPS IRQ line */
-#define GPIC_CFG_IL_SET(x) (((x) & 3) << 2)
-#define GPIC_CFG_IL_MASK (3 << 2)
-
-/* pin interrupt type setup */
-#define GPIC_CFG_IC_OFF (0 << 4)
-#define GPIC_CFG_IC_LEVEL_LOW (1 << 4)
-#define GPIC_CFG_IC_LEVEL_HIGH (2 << 4)
-#define GPIC_CFG_IC_EDGE_FALL (5 << 4)
-#define GPIC_CFG_IC_EDGE_RISE (6 << 4)
-#define GPIC_CFG_IC_EDGE_BOTH (7 << 4)
-#define GPIC_CFG_IC_MASK (7 << 4)
-
-/* allow interrupt to wake cpu from 'wait' */
-#define GPIC_CFG_IDLEWAKE (1 << 7)
-
-/***********************************************************************/
-
-/* Au1000 SDRAM memory controller register offsets */
-#define AU1000_MEM_SDMODE0 0x0000
-#define AU1000_MEM_SDMODE1 0x0004
-#define AU1000_MEM_SDMODE2 0x0008
-#define AU1000_MEM_SDADDR0 0x000C
-#define AU1000_MEM_SDADDR1 0x0010
-#define AU1000_MEM_SDADDR2 0x0014
-#define AU1000_MEM_SDREFCFG 0x0018
-#define AU1000_MEM_SDPRECMD 0x001C
-#define AU1000_MEM_SDAUTOREF 0x0020
-#define AU1000_MEM_SDWRMD0 0x0024
-#define AU1000_MEM_SDWRMD1 0x0028
-#define AU1000_MEM_SDWRMD2 0x002C
-#define AU1000_MEM_SDSLEEP 0x0030
-#define AU1000_MEM_SDSMCKE 0x0034
-
-/* MEM_SDMODE register content definitions */
-#define MEM_SDMODE_F (1 << 22)
-#define MEM_SDMODE_SR (1 << 21)
-#define MEM_SDMODE_BS (1 << 20)
-#define MEM_SDMODE_RS (3 << 18)
-#define MEM_SDMODE_CS (7 << 15)
-#define MEM_SDMODE_TRAS (15 << 11)
-#define MEM_SDMODE_TMRD (3 << 9)
-#define MEM_SDMODE_TWR (3 << 7)
-#define MEM_SDMODE_TRP (3 << 5)
-#define MEM_SDMODE_TRCD (3 << 3)
-#define MEM_SDMODE_TCL (7 << 0)
-
-#define MEM_SDMODE_BS_2Bank (0 << 20)
-#define MEM_SDMODE_BS_4Bank (1 << 20)
-#define MEM_SDMODE_RS_11Row (0 << 18)
-#define MEM_SDMODE_RS_12Row (1 << 18)
-#define MEM_SDMODE_RS_13Row (2 << 18)
-#define MEM_SDMODE_RS_N(N) ((N) << 18)
-#define MEM_SDMODE_CS_7Col (0 << 15)
-#define MEM_SDMODE_CS_8Col (1 << 15)
-#define MEM_SDMODE_CS_9Col (2 << 15)
-#define MEM_SDMODE_CS_10Col (3 << 15)
-#define MEM_SDMODE_CS_11Col (4 << 15)
-#define MEM_SDMODE_CS_N(N) ((N) << 15)
-#define MEM_SDMODE_TRAS_N(N) ((N) << 11)
-#define MEM_SDMODE_TMRD_N(N) ((N) << 9)
-#define MEM_SDMODE_TWR_N(N) ((N) << 7)
-#define MEM_SDMODE_TRP_N(N) ((N) << 5)
-#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
-#define MEM_SDMODE_TCL_N(N) ((N) << 0)
-
-/* MEM_SDADDR register contents definitions */
-#define MEM_SDADDR_E (1 << 20)
-#define MEM_SDADDR_CSBA (0x03FF << 10)
-#define MEM_SDADDR_CSMASK (0x03FF << 0)
-#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
-#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
-
-/* MEM_SDREFCFG register content definitions */
-#define MEM_SDREFCFG_TRC (15 << 28)
-#define MEM_SDREFCFG_TRPM (3 << 26)
-#define MEM_SDREFCFG_E (1 << 25)
-#define MEM_SDREFCFG_RE (0x1ffffff << 0)
-#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
-#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
-#define MEM_SDREFCFG_REF_N(N) (N)
-
-/* Au1550 SDRAM Register Offsets */
-#define AU1550_MEM_SDMODE0 0x0800
-#define AU1550_MEM_SDMODE1 0x0808
-#define AU1550_MEM_SDMODE2 0x0810
-#define AU1550_MEM_SDADDR0 0x0820
-#define AU1550_MEM_SDADDR1 0x0828
-#define AU1550_MEM_SDADDR2 0x0830
-#define AU1550_MEM_SDCONFIGA 0x0840
-#define AU1550_MEM_SDCONFIGB 0x0848
-#define AU1550_MEM_SDSTAT 0x0850
-#define AU1550_MEM_SDERRADDR 0x0858
-#define AU1550_MEM_SDSTRIDE0 0x0860
-#define AU1550_MEM_SDSTRIDE1 0x0868
-#define AU1550_MEM_SDSTRIDE2 0x0870
-#define AU1550_MEM_SDWRMD0 0x0880
-#define AU1550_MEM_SDWRMD1 0x0888
-#define AU1550_MEM_SDWRMD2 0x0890
-#define AU1550_MEM_SDPRECMD 0x08C0
-#define AU1550_MEM_SDAUTOREF 0x08C8
-#define AU1550_MEM_SDSREF 0x08D0
-#define AU1550_MEM_SDSLEEP MEM_SDSREF
-
-/* Static Bus Controller */
-#define MEM_STCFG0 0xB4001000
-#define MEM_STTIME0 0xB4001004
-#define MEM_STADDR0 0xB4001008
-
-#define MEM_STCFG1 0xB4001010
-#define MEM_STTIME1 0xB4001014
-#define MEM_STADDR1 0xB4001018
-
-#define MEM_STCFG2 0xB4001020
-#define MEM_STTIME2 0xB4001024
-#define MEM_STADDR2 0xB4001028
-
-#define MEM_STCFG3 0xB4001030
-#define MEM_STTIME3 0xB4001034
-#define MEM_STADDR3 0xB4001038
-
-#define MEM_STNDCTL 0xB4001100
-#define MEM_STSTAT 0xB4001104
-
-#define MEM_STNAND_CMD 0x0
-#define MEM_STNAND_ADDR 0x4
-#define MEM_STNAND_DATA 0x20
-
-
-/* Programmable Counters 0 and 1 */
-#define SYS_BASE 0xB1900000
-#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
-# define SYS_CNTRL_E1S (1 << 23)
-# define SYS_CNTRL_T1S (1 << 20)
-# define SYS_CNTRL_M21 (1 << 19)
-# define SYS_CNTRL_M11 (1 << 18)
-# define SYS_CNTRL_M01 (1 << 17)
-# define SYS_CNTRL_C1S (1 << 16)
-# define SYS_CNTRL_BP (1 << 14)
-# define SYS_CNTRL_EN1 (1 << 13)
-# define SYS_CNTRL_BT1 (1 << 12)
-# define SYS_CNTRL_EN0 (1 << 11)
-# define SYS_CNTRL_BT0 (1 << 10)
-# define SYS_CNTRL_E0 (1 << 8)
-# define SYS_CNTRL_E0S (1 << 7)
-# define SYS_CNTRL_32S (1 << 5)
-# define SYS_CNTRL_T0S (1 << 4)
-# define SYS_CNTRL_M20 (1 << 3)
-# define SYS_CNTRL_M10 (1 << 2)
-# define SYS_CNTRL_M00 (1 << 1)
-# define SYS_CNTRL_C0S (1 << 0)
-
-/* Programmable Counter 0 Registers */
-#define SYS_TOYTRIM (SYS_BASE + 0)
-#define SYS_TOYWRITE (SYS_BASE + 4)
-#define SYS_TOYMATCH0 (SYS_BASE + 8)
-#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
-#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
-#define SYS_TOYREAD (SYS_BASE + 0x40)
-
-/* Programmable Counter 1 Registers */
-#define SYS_RTCTRIM (SYS_BASE + 0x44)
-#define SYS_RTCWRITE (SYS_BASE + 0x48)
-#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
-#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
-#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
-#define SYS_RTCREAD (SYS_BASE + 0x58)
-
-/* I2S Controller */
-#define I2S_DATA 0xB1000000
-# define I2S_DATA_MASK 0xffffff
-#define I2S_CONFIG 0xB1000004
-# define I2S_CONFIG_XU (1 << 25)
-# define I2S_CONFIG_XO (1 << 24)
-# define I2S_CONFIG_RU (1 << 23)
-# define I2S_CONFIG_RO (1 << 22)
-# define I2S_CONFIG_TR (1 << 21)
-# define I2S_CONFIG_TE (1 << 20)
-# define I2S_CONFIG_TF (1 << 19)
-# define I2S_CONFIG_RR (1 << 18)
-# define I2S_CONFIG_RE (1 << 17)
-# define I2S_CONFIG_RF (1 << 16)
-# define I2S_CONFIG_PD (1 << 11)
-# define I2S_CONFIG_LB (1 << 10)
-# define I2S_CONFIG_IC (1 << 9)
-# define I2S_CONFIG_FM_BIT 7
-# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_TN (1 << 6)
-# define I2S_CONFIG_RN (1 << 5)
-# define I2S_CONFIG_SZ_BIT 0
-# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
-
-#define I2S_CONTROL 0xB1000008
-# define I2S_CONTROL_D (1 << 1)
-# define I2S_CONTROL_CE (1 << 0)
-
-
-/* Ethernet Controllers */
-
-/* 4 byte offsets from AU1000_ETH_BASE */
-#define MAC_CONTROL 0x0
-# define MAC_RX_ENABLE (1 << 2)
-# define MAC_TX_ENABLE (1 << 3)
-# define MAC_DEF_CHECK (1 << 5)
-# define MAC_SET_BL(X) (((X) & 0x3) << 6)
-# define MAC_AUTO_PAD (1 << 8)
-# define MAC_DISABLE_RETRY (1 << 10)
-# define MAC_DISABLE_BCAST (1 << 11)
-# define MAC_LATE_COL (1 << 12)
-# define MAC_HASH_MODE (1 << 13)
-# define MAC_HASH_ONLY (1 << 15)
-# define MAC_PASS_ALL (1 << 16)
-# define MAC_INVERSE_FILTER (1 << 17)
-# define MAC_PROMISCUOUS (1 << 18)
-# define MAC_PASS_ALL_MULTI (1 << 19)
-# define MAC_FULL_DUPLEX (1 << 20)
-# define MAC_NORMAL_MODE 0
-# define MAC_INT_LOOPBACK (1 << 21)
-# define MAC_EXT_LOOPBACK (1 << 22)
-# define MAC_DISABLE_RX_OWN (1 << 23)
-# define MAC_BIG_ENDIAN (1 << 30)
-# define MAC_RX_ALL (1 << 31)
-#define MAC_ADDRESS_HIGH 0x4
-#define MAC_ADDRESS_LOW 0x8
-#define MAC_MCAST_HIGH 0xC
-#define MAC_MCAST_LOW 0x10
-#define MAC_MII_CNTRL 0x14
-# define MAC_MII_BUSY (1 << 0)
-# define MAC_MII_READ 0
-# define MAC_MII_WRITE (1 << 1)
-# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
-# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
-#define MAC_MII_DATA 0x18
-#define MAC_FLOW_CNTRL 0x1C
-# define MAC_FLOW_CNTRL_BUSY (1 << 0)
-# define MAC_FLOW_CNTRL_ENABLE (1 << 1)
-# define MAC_PASS_CONTROL (1 << 2)
-# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16)
-#define MAC_VLAN1_TAG 0x20
-#define MAC_VLAN2_TAG 0x24
-
-/* Ethernet Controller Enable */
-
-# define MAC_EN_CLOCK_ENABLE (1 << 0)
-# define MAC_EN_RESET0 (1 << 1)
-# define MAC_EN_TOSS (0 << 2)
-# define MAC_EN_CACHEABLE (1 << 3)
-# define MAC_EN_RESET1 (1 << 4)
-# define MAC_EN_RESET2 (1 << 5)
-# define MAC_DMA_RESET (1 << 6)
-
-/* Ethernet Controller DMA Channels */
-
-#define MAC0_TX_DMA_ADDR 0xB4004000
-#define MAC1_TX_DMA_ADDR 0xB4004200
-/* offsets from MAC_TX_RING_ADDR address */
-#define MAC_TX_BUFF0_STATUS 0x0
-# define TX_FRAME_ABORTED (1 << 0)
-# define TX_JAB_TIMEOUT (1 << 1)
-# define TX_NO_CARRIER (1 << 2)
-# define TX_LOSS_CARRIER (1 << 3)
-# define TX_EXC_DEF (1 << 4)
-# define TX_LATE_COLL_ABORT (1 << 5)
-# define TX_EXC_COLL (1 << 6)
-# define TX_UNDERRUN (1 << 7)
-# define TX_DEFERRED (1 << 8)
-# define TX_LATE_COLL (1 << 9)
-# define TX_COLL_CNT_MASK (0xF << 10)
-# define TX_PKT_RETRY (1 << 31)
-#define MAC_TX_BUFF0_ADDR 0x4
-# define TX_DMA_ENABLE (1 << 0)
-# define TX_T_DONE (1 << 1)
-# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
-#define MAC_TX_BUFF0_LEN 0x8
-#define MAC_TX_BUFF1_STATUS 0x10
-#define MAC_TX_BUFF1_ADDR 0x14
-#define MAC_TX_BUFF1_LEN 0x18
-#define MAC_TX_BUFF2_STATUS 0x20
-#define MAC_TX_BUFF2_ADDR 0x24
-#define MAC_TX_BUFF2_LEN 0x28
-#define MAC_TX_BUFF3_STATUS 0x30
-#define MAC_TX_BUFF3_ADDR 0x34
-#define MAC_TX_BUFF3_LEN 0x38
-
-#define MAC0_RX_DMA_ADDR 0xB4004100
-#define MAC1_RX_DMA_ADDR 0xB4004300
-/* offsets from MAC_RX_RING_ADDR */
-#define MAC_RX_BUFF0_STATUS 0x0
-# define RX_FRAME_LEN_MASK 0x3fff
-# define RX_WDOG_TIMER (1 << 14)
-# define RX_RUNT (1 << 15)
-# define RX_OVERLEN (1 << 16)
-# define RX_COLL (1 << 17)
-# define RX_ETHER (1 << 18)
-# define RX_MII_ERROR (1 << 19)
-# define RX_DRIBBLING (1 << 20)
-# define RX_CRC_ERROR (1 << 21)
-# define RX_VLAN1 (1 << 22)
-# define RX_VLAN2 (1 << 23)
-# define RX_LEN_ERROR (1 << 24)
-# define RX_CNTRL_FRAME (1 << 25)
-# define RX_U_CNTRL_FRAME (1 << 26)
-# define RX_MCAST_FRAME (1 << 27)
-# define RX_BCAST_FRAME (1 << 28)
-# define RX_FILTER_FAIL (1 << 29)
-# define RX_PACKET_FILTER (1 << 30)
-# define RX_MISSED_FRAME (1 << 31)
-
-# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \
- RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
- RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
-#define MAC_RX_BUFF0_ADDR 0x4
-# define RX_DMA_ENABLE (1 << 0)
-# define RX_T_DONE (1 << 1)
-# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
-# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0)
-#define MAC_RX_BUFF1_STATUS 0x10
-#define MAC_RX_BUFF1_ADDR 0x14
-#define MAC_RX_BUFF2_STATUS 0x20
-#define MAC_RX_BUFF2_ADDR 0x24
-#define MAC_RX_BUFF3_STATUS 0x30
-#define MAC_RX_BUFF3_ADDR 0x34
-
-/* SSIO */
-#define SSI0_STATUS 0xB1600000
-# define SSI_STATUS_BF (1 << 4)
-# define SSI_STATUS_OF (1 << 3)
-# define SSI_STATUS_UF (1 << 2)
-# define SSI_STATUS_D (1 << 1)
-# define SSI_STATUS_B (1 << 0)
-#define SSI0_INT 0xB1600004
-# define SSI_INT_OI (1 << 3)
-# define SSI_INT_UI (1 << 2)
-# define SSI_INT_DI (1 << 1)
-#define SSI0_INT_ENABLE 0xB1600008
-# define SSI_INTE_OIE (1 << 3)
-# define SSI_INTE_UIE (1 << 2)
-# define SSI_INTE_DIE (1 << 1)
-#define SSI0_CONFIG 0xB1600020
-# define SSI_CONFIG_AO (1 << 24)
-# define SSI_CONFIG_DO (1 << 23)
-# define SSI_CONFIG_ALEN_BIT 20
-# define SSI_CONFIG_ALEN_MASK (0x7 << 20)
-# define SSI_CONFIG_DLEN_BIT 16
-# define SSI_CONFIG_DLEN_MASK (0x7 << 16)
-# define SSI_CONFIG_DD (1 << 11)
-# define SSI_CONFIG_AD (1 << 10)
-# define SSI_CONFIG_BM_BIT 8
-# define SSI_CONFIG_BM_MASK (0x3 << 8)
-# define SSI_CONFIG_CE (1 << 7)
-# define SSI_CONFIG_DP (1 << 6)
-# define SSI_CONFIG_DL (1 << 5)
-# define SSI_CONFIG_EP (1 << 4)
-#define SSI0_ADATA 0xB1600024
-# define SSI_AD_D (1 << 24)
-# define SSI_AD_ADDR_BIT 16
-# define SSI_AD_ADDR_MASK (0xff << 16)
-# define SSI_AD_DATA_BIT 0
-# define SSI_AD_DATA_MASK (0xfff << 0)
-#define SSI0_CLKDIV 0xB1600028
-#define SSI0_CONTROL 0xB1600100
-# define SSI_CONTROL_CD (1 << 1)
-# define SSI_CONTROL_E (1 << 0)
-
-/* SSI1 */
-#define SSI1_STATUS 0xB1680000
-#define SSI1_INT 0xB1680004
-#define SSI1_INT_ENABLE 0xB1680008
-#define SSI1_CONFIG 0xB1680020
-#define SSI1_ADATA 0xB1680024
-#define SSI1_CLKDIV 0xB1680028
-#define SSI1_ENABLE 0xB1680100
-
-/*
- * Register content definitions
- */
-#define SSI_STATUS_BF (1 << 4)
-#define SSI_STATUS_OF (1 << 3)
-#define SSI_STATUS_UF (1 << 2)
-#define SSI_STATUS_D (1 << 1)
-#define SSI_STATUS_B (1 << 0)
-
-/* SSI_INT */
-#define SSI_INT_OI (1 << 3)
-#define SSI_INT_UI (1 << 2)
-#define SSI_INT_DI (1 << 1)
-
-/* SSI_INTEN */
-#define SSI_INTEN_OIE (1 << 3)
-#define SSI_INTEN_UIE (1 << 2)
-#define SSI_INTEN_DIE (1 << 1)
-
-#define SSI_CONFIG_AO (1 << 24)
-#define SSI_CONFIG_DO (1 << 23)
-#define SSI_CONFIG_ALEN (7 << 20)
-#define SSI_CONFIG_DLEN (15 << 16)
-#define SSI_CONFIG_DD (1 << 11)
-#define SSI_CONFIG_AD (1 << 10)
-#define SSI_CONFIG_BM (3 << 8)
-#define SSI_CONFIG_CE (1 << 7)
-#define SSI_CONFIG_DP (1 << 6)
-#define SSI_CONFIG_DL (1 << 5)
-#define SSI_CONFIG_EP (1 << 4)
-#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20)
-#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16)
-#define SSI_CONFIG_BM_HI (0 << 8)
-#define SSI_CONFIG_BM_LO (1 << 8)
-#define SSI_CONFIG_BM_CY (2 << 8)
-
-#define SSI_ADATA_D (1 << 24)
-#define SSI_ADATA_ADDR (0xFF << 16)
-#define SSI_ADATA_DATA 0x0FFF
-#define SSI_ADATA_ADDR_N(N) (N << 16)
-
-#define SSI_ENABLE_CD (1 << 1)
-#define SSI_ENABLE_E (1 << 0)
-
-
-/*
- * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not
- * used to select FIR/SIR mode on the transceiver but as a GPIO. Instead a
- * CPLD has to be told about the mode.
- */
-#define AU1000_IRDA_PHY_MODE_OFF 0
-#define AU1000_IRDA_PHY_MODE_SIR 1
-#define AU1000_IRDA_PHY_MODE_FIR 2
-
-struct au1k_irda_platform_data {
- void(*set_phy_mode)(int mode);
-};
-
-
-/* GPIO */
-#define SYS_PINFUNC 0xB190002C
-# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */
-# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */
-# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */
-# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */
-# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */
-# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */
-# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */
-# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */
-# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */
-# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */
-# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */
-# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */
-# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */
-# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */
-# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */
-# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */
-
-/* Au1100 only */
-# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */
-# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */
-# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */
-# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */
-
-/* Au1550 only. Redefines lots of pins */
-# define SYS_PF_PSC2_MASK (7 << 17)
-# define SYS_PF_PSC2_AC97 0
-# define SYS_PF_PSC2_SPI 0
-# define SYS_PF_PSC2_I2S (1 << 17)
-# define SYS_PF_PSC2_SMBUS (3 << 17)
-# define SYS_PF_PSC2_GPIO (7 << 17)
-# define SYS_PF_PSC3_MASK (7 << 20)
-# define SYS_PF_PSC3_AC97 0
-# define SYS_PF_PSC3_SPI 0
-# define SYS_PF_PSC3_I2S (1 << 20)
-# define SYS_PF_PSC3_SMBUS (3 << 20)
-# define SYS_PF_PSC3_GPIO (7 << 20)
-# define SYS_PF_PSC1_S1 (1 << 1)
-# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
-
-/* Au1200 only */
-#define SYS_PINFUNC_DMA (1 << 31)
-#define SYS_PINFUNC_S0A (1 << 30)
-#define SYS_PINFUNC_S1A (1 << 29)
-#define SYS_PINFUNC_LP0 (1 << 28)
-#define SYS_PINFUNC_LP1 (1 << 27)
-#define SYS_PINFUNC_LD16 (1 << 26)
-#define SYS_PINFUNC_LD8 (1 << 25)
-#define SYS_PINFUNC_LD1 (1 << 24)
-#define SYS_PINFUNC_LD0 (1 << 23)
-#define SYS_PINFUNC_P1A (3 << 21)
-#define SYS_PINFUNC_P1B (1 << 20)
-#define SYS_PINFUNC_FS3 (1 << 19)
-#define SYS_PINFUNC_P0A (3 << 17)
-#define SYS_PINFUNC_CS (1 << 16)
-#define SYS_PINFUNC_CIM (1 << 15)
-#define SYS_PINFUNC_P1C (1 << 14)
-#define SYS_PINFUNC_U1T (1 << 12)
-#define SYS_PINFUNC_U1R (1 << 11)
-#define SYS_PINFUNC_EX1 (1 << 10)
-#define SYS_PINFUNC_EX0 (1 << 9)
-#define SYS_PINFUNC_U0R (1 << 8)
-#define SYS_PINFUNC_MC (1 << 7)
-#define SYS_PINFUNC_S0B (1 << 6)
-#define SYS_PINFUNC_S0C (1 << 5)
-#define SYS_PINFUNC_P0B (1 << 4)
-#define SYS_PINFUNC_U0T (1 << 3)
-#define SYS_PINFUNC_S1B (1 << 2)
-
-/* Power Management */
-#define SYS_SCRATCH0 0xB1900018
-#define SYS_SCRATCH1 0xB190001C
-#define SYS_WAKEMSK 0xB1900034
-#define SYS_ENDIAN 0xB1900038
-#define SYS_POWERCTRL 0xB190003C
-#define SYS_WAKESRC 0xB190005C
-#define SYS_SLPPWR 0xB1900078
-#define SYS_SLEEP 0xB190007C
-
-#define SYS_WAKEMSK_D2 (1 << 9)
-#define SYS_WAKEMSK_M2 (1 << 8)
-#define SYS_WAKEMSK_GPIO(x) (1 << (x))
-
-/* Clock Controller */
-#define SYS_FREQCTRL0 0xB1900020
-# define SYS_FC_FRDIV2_BIT 22
-# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
-# define SYS_FC_FE2 (1 << 21)
-# define SYS_FC_FS2 (1 << 20)
-# define SYS_FC_FRDIV1_BIT 12
-# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
-# define SYS_FC_FE1 (1 << 11)
-# define SYS_FC_FS1 (1 << 10)
-# define SYS_FC_FRDIV0_BIT 2
-# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
-# define SYS_FC_FE0 (1 << 1)
-# define SYS_FC_FS0 (1 << 0)
-#define SYS_FREQCTRL1 0xB1900024
-# define SYS_FC_FRDIV5_BIT 22
-# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
-# define SYS_FC_FE5 (1 << 21)
-# define SYS_FC_FS5 (1 << 20)
-# define SYS_FC_FRDIV4_BIT 12
-# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
-# define SYS_FC_FE4 (1 << 11)
-# define SYS_FC_FS4 (1 << 10)
-# define SYS_FC_FRDIV3_BIT 2
-# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
-# define SYS_FC_FE3 (1 << 1)
-# define SYS_FC_FS3 (1 << 0)
-#define SYS_CLKSRC 0xB1900028
-# define SYS_CS_ME1_BIT 27
-# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT)
-# define SYS_CS_DE1 (1 << 26)
-# define SYS_CS_CE1 (1 << 25)
-# define SYS_CS_ME0_BIT 22
-# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT)
-# define SYS_CS_DE0 (1 << 21)
-# define SYS_CS_CE0 (1 << 20)
-# define SYS_CS_MI2_BIT 17
-# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT)
-# define SYS_CS_DI2 (1 << 16)
-# define SYS_CS_CI2 (1 << 15)
-
-# define SYS_CS_ML_BIT 7
-# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT)
-# define SYS_CS_DL (1 << 6)
-# define SYS_CS_CL (1 << 5)
-
-# define SYS_CS_MUH_BIT 12
-# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT)
-# define SYS_CS_DUH (1 << 11)
-# define SYS_CS_CUH (1 << 10)
-# define SYS_CS_MUD_BIT 7
-# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT)
-# define SYS_CS_DUD (1 << 6)
-# define SYS_CS_CUD (1 << 5)
-
-# define SYS_CS_MIR_BIT 2
-# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT)
-# define SYS_CS_DIR (1 << 1)
-# define SYS_CS_CIR (1 << 0)
-
-# define SYS_CS_MUX_AUX 0x1
-# define SYS_CS_MUX_FQ0 0x2
-# define SYS_CS_MUX_FQ1 0x3
-# define SYS_CS_MUX_FQ2 0x4
-# define SYS_CS_MUX_FQ3 0x5
-# define SYS_CS_MUX_FQ4 0x6
-# define SYS_CS_MUX_FQ5 0x7
-#define SYS_CPUPLL 0xB1900060
-#define SYS_AUXPLL 0xB1900064
-
-/* AC97 Controller */
-#define AC97C_CONFIG 0xB0000000
-# define AC97C_RECV_SLOTS_BIT 13
-# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
-# define AC97C_XMIT_SLOTS_BIT 3
-# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
-# define AC97C_SG (1 << 2)
-# define AC97C_SYNC (1 << 1)
-# define AC97C_RESET (1 << 0)
-#define AC97C_STATUS 0xB0000004
-# define AC97C_XU (1 << 11)
-# define AC97C_XO (1 << 10)
-# define AC97C_RU (1 << 9)
-# define AC97C_RO (1 << 8)
-# define AC97C_READY (1 << 7)
-# define AC97C_CP (1 << 6)
-# define AC97C_TR (1 << 5)
-# define AC97C_TE (1 << 4)
-# define AC97C_TF (1 << 3)
-# define AC97C_RR (1 << 2)
-# define AC97C_RE (1 << 1)
-# define AC97C_RF (1 << 0)
-#define AC97C_DATA 0xB0000008
-#define AC97C_CMD 0xB000000C
-# define AC97C_WD_BIT 16
-# define AC97C_READ (1 << 7)
-# define AC97C_INDEX_MASK 0x7f
-#define AC97C_CNTRL 0xB0000010
-# define AC97C_RS (1 << 1)
-# define AC97C_CE (1 << 0)
-
-
-/* The PCI chip selects are outside the 32bit space, and since we can't
- * just program the 36bit addresses into BARs, we have to take a chunk
- * out of the 32bit space and reserve it for PCI. When these addresses
- * are ioremap()ed, they'll be fixed up to the real 36bit address before
- * being passed to the real ioremap function.
- */
-#define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4)
-#define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
-
-/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
- * adjust the device's resources.
- */
-#define ALCHEMY_PCI_IOWIN_START 0x00001000
-#define ALCHEMY_PCI_IOWIN_END 0x0000FFFF
-
-#ifdef CONFIG_PCI
-
-#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xfffffffffULL
-
-#else
-
-/* Don't allow any legacy ports probing */
-#define IOPORT_RESOURCE_START 0x10000000
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xfffffffffULL
-
-#endif
-
-/* PCI controller block register offsets */
-#define PCI_REG_CMEM 0x0000
-#define PCI_REG_CONFIG 0x0004
-#define PCI_REG_B2BMASK_CCH 0x0008
-#define PCI_REG_B2BBASE0_VID 0x000C
-#define PCI_REG_B2BBASE1_SID 0x0010
-#define PCI_REG_MWMASK_DEV 0x0014
-#define PCI_REG_MWBASE_REV_CCL 0x0018
-#define PCI_REG_ERR_ADDR 0x001C
-#define PCI_REG_SPEC_INTACK 0x0020
-#define PCI_REG_ID 0x0100
-#define PCI_REG_STATCMD 0x0104
-#define PCI_REG_CLASSREV 0x0108
-#define PCI_REG_PARAM 0x010C
-#define PCI_REG_MBAR 0x0110
-#define PCI_REG_TIMEOUT 0x0140
-
-/* PCI controller block register bits */
-#define PCI_CMEM_E (1 << 28) /* enable cacheable memory */
-#define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14)
-#define PCI_CMEM_CMMASK(x) ((x) & 0x3fff)
-#define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */
-#define PCI_CONFIG_ET (1 << 26) /* error in target mode */
-#define PCI_CONFIG_EF (1 << 25) /* fatal error */
-#define PCI_CONFIG_EP (1 << 24) /* parity error */
-#define PCI_CONFIG_EM (1 << 23) /* multiple errors */
-#define PCI_CONFIG_BM (1 << 22) /* bad master error */
-#define PCI_CONFIG_PD (1 << 20) /* PCI Disable */
-#define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */
-#define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */
-#define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */
-#define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */
-#define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */
-#define PCI_CONFIG_IMM (1 << 11) /* int on master abort */
-#define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */
-#define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */
-#define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */
-#define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */
-#define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */
-#define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */
-#define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */
-#define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */
-#define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */
-#define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */
-#define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */
-#define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */
-#define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */
-#define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16)
-#define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */
-#define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16)
-#define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff)
-#define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16)
-#define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff)
-#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
-#define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff)
-#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
-#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8)
-#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff)
-#define PCI_ID_DID(x) (((x) & 0xffff) << 16)
-#define PCI_ID_VID(x) ((x) & 0xffff)
-#define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16)
-#define PCI_STATCMD_CMD(x) ((x) & 0xffff)
-#define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8)
-#define PCI_CLASSREV_REV(x) ((x) & 0xff)
-#define PCI_PARAM_BIST(x) (((x) & 0xff) << 24)
-#define PCI_PARAM_HT(x) (((x) & 0xff) << 16)
-#define PCI_PARAM_LT(x) (((x) & 0xff) << 8)
-#define PCI_PARAM_CLS(x) ((x) & 0xff)
-#define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */
-#define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */
-
#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
index 7cedca5..0a0cd42 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -106,7 +106,7 @@
struct dma_chan {
int dev_id; /* this channel is allocated if >= 0, */
/* free otherwise */
- unsigned int io;
+ void __iomem *io;
const char *dev_str;
int irq;
void *irq_dev;
@@ -157,7 +157,7 @@
if (!chan)
return;
- au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
+ __raw_writel(DMA_BE0, chan->io + DMA_MODE_SET);
}
static inline void enable_dma_buffer1(unsigned int dmanr)
@@ -166,7 +166,7 @@
if (!chan)
return;
- au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
+ __raw_writel(DMA_BE1, chan->io + DMA_MODE_SET);
}
static inline void enable_dma_buffers(unsigned int dmanr)
{
@@ -174,7 +174,7 @@
if (!chan)
return;
- au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
+ __raw_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
}
static inline void start_dma(unsigned int dmanr)
@@ -183,7 +183,7 @@
if (!chan)
return;
- au_writel(DMA_GO, chan->io + DMA_MODE_SET);
+ __raw_writel(DMA_GO, chan->io + DMA_MODE_SET);
}
#define DMA_HALT_POLL 0x5000
@@ -195,11 +195,11 @@
if (!chan)
return;
- au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
+ __raw_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
/* Poll the halt bit */
for (i = 0; i < DMA_HALT_POLL; i++)
- if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
+ if (__raw_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
break;
if (i == DMA_HALT_POLL)
printk(KERN_INFO "halt_dma: HALT poll expired!\n");
@@ -215,7 +215,7 @@
halt_dma(dmanr);
/* Now we can disable the buffers */
- au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
+ __raw_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
}
static inline int dma_halted(unsigned int dmanr)
@@ -224,7 +224,7 @@
if (!chan)
return 1;
- return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
+ return (__raw_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
}
/* Initialize a DMA channel. */
@@ -239,14 +239,14 @@
disable_dma(dmanr);
/* Set device FIFO address */
- au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
+ __raw_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
if (chan->irq)
mode |= DMA_IE;
- au_writel(~mode, chan->io + DMA_MODE_CLEAR);
- au_writel(mode, chan->io + DMA_MODE_SET);
+ __raw_writel(~mode, chan->io + DMA_MODE_CLEAR);
+ __raw_writel(mode, chan->io + DMA_MODE_SET);
}
/*
@@ -283,7 +283,7 @@
if (!chan)
return -1;
- return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
+ return (__raw_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
}
/*
@@ -304,7 +304,7 @@
if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
return;
- au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
+ __raw_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
}
/*
@@ -316,7 +316,7 @@
if (!chan)
return;
- au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
+ __raw_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
}
static inline void clear_dma_done1(unsigned int dmanr)
@@ -325,7 +325,7 @@
if (!chan)
return;
- au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
+ __raw_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
}
/*
@@ -344,7 +344,7 @@
if (!chan)
return;
- au_writel(a, chan->io + DMA_BUFFER0_START);
+ __raw_writel(a, chan->io + DMA_BUFFER0_START);
}
/*
@@ -356,7 +356,7 @@
if (!chan)
return;
- au_writel(a, chan->io + DMA_BUFFER1_START);
+ __raw_writel(a, chan->io + DMA_BUFFER1_START);
}
@@ -370,7 +370,7 @@
if (!chan)
return;
count &= DMA_COUNT_MASK;
- au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+ __raw_writel(count, chan->io + DMA_BUFFER0_COUNT);
}
/*
@@ -383,7 +383,7 @@
if (!chan)
return;
count &= DMA_COUNT_MASK;
- au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+ __raw_writel(count, chan->io + DMA_BUFFER1_COUNT);
}
/*
@@ -396,8 +396,8 @@
if (!chan)
return;
count &= DMA_COUNT_MASK;
- au_writel(count, chan->io + DMA_BUFFER0_COUNT);
- au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+ __raw_writel(count, chan->io + DMA_BUFFER0_COUNT);
+ __raw_writel(count, chan->io + DMA_BUFFER1_COUNT);
}
/*
@@ -410,7 +410,7 @@
if (!chan)
return 0;
- return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+ return __raw_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
}
@@ -437,10 +437,10 @@
if (!chan)
return 0;
- curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
+ curBufCntReg = (__raw_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT;
- count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;
+ count = __raw_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;
if ((chan->mode & DMA_DW_MASK) == DMA_DW16)
count <<= 1;
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 796afd0..9785e4e 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -25,20 +25,20 @@
#define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off))
/* GPIO1 registers within SYS_ area */
-#define SYS_TRIOUTRD 0x100
-#define SYS_TRIOUTCLR 0x100
-#define SYS_OUTPUTRD 0x108
-#define SYS_OUTPUTSET 0x108
-#define SYS_OUTPUTCLR 0x10C
-#define SYS_PINSTATERD 0x110
-#define SYS_PININPUTEN 0x110
+#define AU1000_SYS_TRIOUTRD 0x100
+#define AU1000_SYS_TRIOUTCLR 0x100
+#define AU1000_SYS_OUTPUTRD 0x108
+#define AU1000_SYS_OUTPUTSET 0x108
+#define AU1000_SYS_OUTPUTCLR 0x10C
+#define AU1000_SYS_PINSTATERD 0x110
+#define AU1000_SYS_PININPUTEN 0x110
/* register offsets within GPIO2 block */
-#define GPIO2_DIR 0x00
-#define GPIO2_OUTPUT 0x08
-#define GPIO2_PINSTATE 0x0C
-#define GPIO2_INTENABLE 0x10
-#define GPIO2_ENABLE 0x14
+#define AU1000_GPIO2_DIR 0x00
+#define AU1000_GPIO2_OUTPUT 0x08
+#define AU1000_GPIO2_PINSTATE 0x0C
+#define AU1000_GPIO2_INTENABLE 0x10
+#define AU1000_GPIO2_ENABLE 0x14
struct gpio;
@@ -217,26 +217,21 @@
*/
static inline void alchemy_gpio1_set_value(int gpio, int v)
{
- void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
- unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR;
- __raw_writel(mask, base + r);
- wmb();
+ unsigned long r = v ? AU1000_SYS_OUTPUTSET : AU1000_SYS_OUTPUTCLR;
+ alchemy_wrsys(mask, r);
}
static inline int alchemy_gpio1_get_value(int gpio)
{
- void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
- return __raw_readl(base + SYS_PINSTATERD) & mask;
+ return alchemy_rdsys(AU1000_SYS_PINSTATERD) & mask;
}
static inline int alchemy_gpio1_direction_input(int gpio)
{
- void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
- __raw_writel(mask, base + SYS_TRIOUTCLR);
- wmb();
+ alchemy_wrsys(mask, AU1000_SYS_TRIOUTCLR);
return 0;
}
@@ -279,13 +274,13 @@
{
void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
- unsigned long d = __raw_readl(base + GPIO2_DIR);
+ unsigned long d = __raw_readl(base + AU1000_GPIO2_DIR);
if (to_out)
d |= mask;
else
d &= ~mask;
- __raw_writel(d, base + GPIO2_DIR);
+ __raw_writel(d, base + AU1000_GPIO2_DIR);
wmb();
}
@@ -294,14 +289,15 @@
void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
unsigned long mask;
mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
- __raw_writel(mask, base + GPIO2_OUTPUT);
+ __raw_writel(mask, base + AU1000_GPIO2_OUTPUT);
wmb();
}
static inline int alchemy_gpio2_get_value(int gpio)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
- return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
+ return __raw_readl(base + AU1000_GPIO2_PINSTATE) &
+ (1 << (gpio - ALCHEMY_GPIO2_BASE));
}
static inline int alchemy_gpio2_direction_input(int gpio)
@@ -352,12 +348,12 @@
static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
- unsigned long r = __raw_readl(base + GPIO2_INTENABLE);
+ unsigned long r = __raw_readl(base + AU1000_GPIO2_INTENABLE);
if (en)
r |= 1 << gpio2;
else
r &= ~(1 << gpio2);
- __raw_writel(r, base + GPIO2_INTENABLE);
+ __raw_writel(r, base + AU1000_GPIO2_INTENABLE);
wmb();
}
@@ -434,9 +430,9 @@
static inline void alchemy_gpio2_enable(void)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
- __raw_writel(3, base + GPIO2_ENABLE); /* reset, clock enabled */
+ __raw_writel(3, base + AU1000_GPIO2_ENABLE); /* reset, clock enabled */
wmb();
- __raw_writel(1, base + GPIO2_ENABLE); /* clock enabled */
+ __raw_writel(1, base + AU1000_GPIO2_ENABLE); /* clock enabled */
wmb();
}
@@ -448,7 +444,7 @@
static inline void alchemy_gpio2_disable(void)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
- __raw_writel(2, base + GPIO2_ENABLE); /* reset, clock disabled */
+ __raw_writel(2, base + AU1000_GPIO2_ENABLE); /* reset, clock disabled */
wmb();
}
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
index bba7399..1f5643b 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -18,6 +18,7 @@
BCM47XX_BOARD_ASUS_WL300G,
BCM47XX_BOARD_ASUS_WL320GE,
BCM47XX_BOARD_ASUS_WL330GE,
+ BCM47XX_BOARD_ASUS_WL500G,
BCM47XX_BOARD_ASUS_WL500GD,
BCM47XX_BOARD_ASUS_WL500GPV1,
BCM47XX_BOARD_ASUS_WL500GPV2,
@@ -70,11 +71,15 @@
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- BCM47XX_BOARD_LINKSYS_WRT54G,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708,
BCM47XX_BOARD_LINKSYS_WRT610NV1,
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,
+ BCM47XX_BOARD_MICROSOFT_MN700,
+
BCM47XX_BOARD_MOTOROLA_WE800G,
BCM47XX_BOARD_MOTOROLA_WR850GP,
BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
index 3112f08..56bb192 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -19,118 +19,68 @@
#define BCM6368_CPU_ID 0x6368
void __init bcm63xx_cpu_init(void);
-u16 __bcm63xx_get_cpu_id(void);
u8 bcm63xx_get_cpu_rev(void);
unsigned int bcm63xx_get_cpu_freq(void);
+static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
+{
+ switch (cpu_id) {
#ifdef CONFIG_BCM63XX_CPU_3368
-# ifdef bcm63xx_get_cpu_id
-# undef bcm63xx_get_cpu_id
-# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-# define BCMCPU_RUNTIME_DETECT
-# else
-# define bcm63xx_get_cpu_id() BCM3368_CPU_ID
-# endif
-# define BCMCPU_IS_3368() (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-#else
-# define BCMCPU_IS_3368() (0)
+ case BCM3368_CPU_ID:
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
-# ifdef bcm63xx_get_cpu_id
-# undef bcm63xx_get_cpu_id
-# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-# define BCMCPU_RUNTIME_DETECT
-# else
-# define bcm63xx_get_cpu_id() BCM6328_CPU_ID
-# endif
-# define BCMCPU_IS_6328() (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
-#else
-# define BCMCPU_IS_6328() (0)
+ case BCM6328_CPU_ID:
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
-# ifdef bcm63xx_get_cpu_id
-# undef bcm63xx_get_cpu_id
-# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-# define BCMCPU_RUNTIME_DETECT
-# else
-# define bcm63xx_get_cpu_id() BCM6338_CPU_ID
-# endif
-# define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
-#else
-# define BCMCPU_IS_6338() (0)
+ case BCM6338_CPU_ID:
#endif
#ifdef CONFIG_BCM63XX_CPU_6345
-# ifdef bcm63xx_get_cpu_id
-# undef bcm63xx_get_cpu_id
-# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-# define BCMCPU_RUNTIME_DETECT
-# else
-# define bcm63xx_get_cpu_id() BCM6345_CPU_ID
-# endif
-# define BCMCPU_IS_6345() (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-#else
-# define BCMCPU_IS_6345() (0)
+ case BCM6345_CPU_ID:
#endif
#ifdef CONFIG_BCM63XX_CPU_6348
-# ifdef bcm63xx_get_cpu_id
-# undef bcm63xx_get_cpu_id
-# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-# define BCMCPU_RUNTIME_DETECT
-# else
-# define bcm63xx_get_cpu_id() BCM6348_CPU_ID
-# endif
-# define BCMCPU_IS_6348() (bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
-#else
-# define BCMCPU_IS_6348() (0)
+ case BCM6348_CPU_ID:
#endif
#ifdef CONFIG_BCM63XX_CPU_6358
-# ifdef bcm63xx_get_cpu_id
-# undef bcm63xx_get_cpu_id
-# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-# define BCMCPU_RUNTIME_DETECT
-# else
-# define bcm63xx_get_cpu_id() BCM6358_CPU_ID
-# endif
-# define BCMCPU_IS_6358() (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
-#else
-# define BCMCPU_IS_6358() (0)
+ case BCM6358_CPU_ID:
#endif
#ifdef CONFIG_BCM63XX_CPU_6362
-# ifdef bcm63xx_get_cpu_id
-# undef bcm63xx_get_cpu_id
-# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-# define BCMCPU_RUNTIME_DETECT
-# else
-# define bcm63xx_get_cpu_id() BCM6362_CPU_ID
-# endif
-# define BCMCPU_IS_6362() (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
-#else
-# define BCMCPU_IS_6362() (0)
+ case BCM6362_CPU_ID:
#endif
-
#ifdef CONFIG_BCM63XX_CPU_6368
-# ifdef bcm63xx_get_cpu_id
-# undef bcm63xx_get_cpu_id
-# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-# define BCMCPU_RUNTIME_DETECT
-# else
-# define bcm63xx_get_cpu_id() BCM6368_CPU_ID
-# endif
-# define BCMCPU_IS_6368() (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-#else
-# define BCMCPU_IS_6368() (0)
+ case BCM6368_CPU_ID:
#endif
+ break;
+ default:
+ unreachable();
+ }
-#ifndef bcm63xx_get_cpu_id
-#error "No CPU support configured"
-#endif
+ return cpu_id;
+}
+
+extern u16 bcm63xx_cpu_id;
+
+static inline u16 __pure bcm63xx_get_cpu_id(void)
+{
+ const u16 cpu_id = bcm63xx_cpu_id;
+
+ return __bcm63xx_get_cpu_id(cpu_id);
+}
+
+#define BCMCPU_IS_3368() (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
+#define BCMCPU_IS_6328() (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
+#define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+#define BCMCPU_IS_6345() (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+#define BCMCPU_IS_6348() (bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
+#define BCMCPU_IS_6358() (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+#define BCMCPU_IS_6362() (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+#define BCMCPU_IS_6368() (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
/*
* While registers sets are (mostly) the same across 63xx CPU, base
@@ -598,55 +548,6 @@
extern const unsigned long *bcm63xx_regs_base;
-#define __GEN_RSET_BASE(__cpu, __rset) \
- case RSET_## __rset : \
- return BCM_## __cpu ##_## __rset ##_BASE;
-
-#define __GEN_RSET(__cpu) \
- switch (set) { \
- __GEN_RSET_BASE(__cpu, DSL_LMEM) \
- __GEN_RSET_BASE(__cpu, PERF) \
- __GEN_RSET_BASE(__cpu, TIMER) \
- __GEN_RSET_BASE(__cpu, WDT) \
- __GEN_RSET_BASE(__cpu, UART0) \
- __GEN_RSET_BASE(__cpu, UART1) \
- __GEN_RSET_BASE(__cpu, GPIO) \
- __GEN_RSET_BASE(__cpu, SPI) \
- __GEN_RSET_BASE(__cpu, HSSPI) \
- __GEN_RSET_BASE(__cpu, UDC0) \
- __GEN_RSET_BASE(__cpu, OHCI0) \
- __GEN_RSET_BASE(__cpu, OHCI_PRIV) \
- __GEN_RSET_BASE(__cpu, USBH_PRIV) \
- __GEN_RSET_BASE(__cpu, USBD) \
- __GEN_RSET_BASE(__cpu, USBDMA) \
- __GEN_RSET_BASE(__cpu, MPI) \
- __GEN_RSET_BASE(__cpu, PCMCIA) \
- __GEN_RSET_BASE(__cpu, PCIE) \
- __GEN_RSET_BASE(__cpu, DSL) \
- __GEN_RSET_BASE(__cpu, ENET0) \
- __GEN_RSET_BASE(__cpu, ENET1) \
- __GEN_RSET_BASE(__cpu, ENETDMA) \
- __GEN_RSET_BASE(__cpu, ENETDMAC) \
- __GEN_RSET_BASE(__cpu, ENETDMAS) \
- __GEN_RSET_BASE(__cpu, ENETSW) \
- __GEN_RSET_BASE(__cpu, EHCI0) \
- __GEN_RSET_BASE(__cpu, SDRAM) \
- __GEN_RSET_BASE(__cpu, MEMC) \
- __GEN_RSET_BASE(__cpu, DDR) \
- __GEN_RSET_BASE(__cpu, M2M) \
- __GEN_RSET_BASE(__cpu, ATM) \
- __GEN_RSET_BASE(__cpu, XTM) \
- __GEN_RSET_BASE(__cpu, XTMDMA) \
- __GEN_RSET_BASE(__cpu, XTMDMAC) \
- __GEN_RSET_BASE(__cpu, XTMDMAS) \
- __GEN_RSET_BASE(__cpu, PCM) \
- __GEN_RSET_BASE(__cpu, PCMDMA) \
- __GEN_RSET_BASE(__cpu, PCMDMAC) \
- __GEN_RSET_BASE(__cpu, PCMDMAS) \
- __GEN_RSET_BASE(__cpu, RNG) \
- __GEN_RSET_BASE(__cpu, MISC) \
- }
-
#define __GEN_CPU_REGS_TABLE(__cpu) \
[RSET_DSL_LMEM] = BCM_## __cpu ##_DSL_LMEM_BASE, \
[RSET_PERF] = BCM_## __cpu ##_PERF_BASE, \
@@ -693,36 +594,7 @@
static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
{
-#ifdef BCMCPU_RUNTIME_DETECT
return bcm63xx_regs_base[set];
-#else
-#ifdef CONFIG_BCM63XX_CPU_3368
- __GEN_RSET(3368)
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6328
- __GEN_RSET(6328)
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6338
- __GEN_RSET(6338)
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6345
- __GEN_RSET(6345)
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6348
- __GEN_RSET(6348)
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6358
- __GEN_RSET(6358)
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6362
- __GEN_RSET(6362)
-#endif
-#ifdef CONFIG_BCM63XX_CPU_6368
- __GEN_RSET(6368)
-#endif
-#endif
- /* unreached */
- return 0;
}
/*
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
index 753953e..466fc85 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
@@ -112,55 +112,9 @@
static inline unsigned long bcm63xx_enetdmacreg(enum bcm63xx_regs_enetdmac reg)
{
-#ifdef BCMCPU_RUNTIME_DETECT
extern const unsigned long *bcm63xx_regs_enetdmac;
return bcm63xx_regs_enetdmac[reg];
-#else
-#ifdef CONFIG_BCM63XX_CPU_6345
- switch (reg) {
- case ENETDMAC_CHANCFG:
- return ENETDMA_6345_CHANCFG_REG;
- case ENETDMAC_IR:
- return ENETDMA_6345_IR_REG;
- case ENETDMAC_IRMASK:
- return ENETDMA_6345_IRMASK_REG;
- case ENETDMAC_MAXBURST:
- return ENETDMA_6345_MAXBURST_REG;
- case ENETDMAC_BUFALLOC:
- return ENETDMA_6345_BUFALLOC_REG;
- case ENETDMAC_RSTART:
- return ENETDMA_6345_RSTART_REG;
- case ENETDMAC_FC:
- return ENETDMA_6345_FC_REG;
- case ENETDMAC_LEN:
- return ENETDMA_6345_LEN_REG;
- }
-#endif
-#if defined(CONFIG_BCM63XX_CPU_6328) || \
- defined(CONFIG_BCM63XX_CPU_6338) || \
- defined(CONFIG_BCM63XX_CPU_6348) || \
- defined(CONFIG_BCM63XX_CPU_6358) || \
- defined(CONFIG_BCM63XX_CPU_6362) || \
- defined(CONFIG_BCM63XX_CPU_6368)
- switch (reg) {
- case ENETDMAC_CHANCFG:
- return ENETDMAC_CHANCFG_REG;
- case ENETDMAC_IR:
- return ENETDMAC_IR_REG;
- case ENETDMAC_IRMASK:
- return ENETDMAC_IRMASK_REG;
- case ENETDMAC_MAXBURST:
- return ENETDMAC_MAXBURST_REG;
- case ENETDMAC_BUFALLOC:
- case ENETDMAC_RSTART:
- case ENETDMAC_FC:
- case ENETDMAC_LEN:
- return 0;
- }
-#endif
-#endif
- return 0;
}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
index c426cab..2573765 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
@@ -30,26 +30,6 @@
SPI_RX_DATA,
};
-#define __GEN_SPI_RSET_BASE(__cpu, __rset) \
- case SPI_## __rset: \
- return SPI_## __cpu ##_## __rset;
-
-#define __GEN_SPI_RSET(__cpu) \
- switch (reg) { \
- __GEN_SPI_RSET_BASE(__cpu, CMD) \
- __GEN_SPI_RSET_BASE(__cpu, INT_STATUS) \
- __GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST) \
- __GEN_SPI_RSET_BASE(__cpu, INT_MASK) \
- __GEN_SPI_RSET_BASE(__cpu, ST) \
- __GEN_SPI_RSET_BASE(__cpu, CLK_CFG) \
- __GEN_SPI_RSET_BASE(__cpu, FILL_BYTE) \
- __GEN_SPI_RSET_BASE(__cpu, MSG_TAIL) \
- __GEN_SPI_RSET_BASE(__cpu, RX_TAIL) \
- __GEN_SPI_RSET_BASE(__cpu, MSG_CTL) \
- __GEN_SPI_RSET_BASE(__cpu, MSG_DATA) \
- __GEN_SPI_RSET_BASE(__cpu, RX_DATA) \
- }
-
#define __GEN_SPI_REGS_TABLE(__cpu) \
[SPI_CMD] = SPI_## __cpu ##_CMD, \
[SPI_INT_STATUS] = SPI_## __cpu ##_INT_STATUS, \
@@ -66,20 +46,9 @@
static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
{
-#ifdef BCMCPU_RUNTIME_DETECT
extern const unsigned long *bcm63xx_regs_spi;
return bcm63xx_regs_spi[reg];
-#else
-#if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
- __GEN_SPI_RSET(6348)
-#endif
-#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) || \
- defined(CONFIG_BCM63XX_CPU_6368)
- __GEN_SPI_RSET(6358)
-#endif
-#endif
- return 0;
}
#endif /* BCM63XX_DEV_SPI_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index ab427f8..4794067 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -215,23 +215,23 @@
/* Interrupt Mask register */
#define PERF_IRQMASK_3368_REG 0xc
-#define PERF_IRQMASK_6328_REG 0x20
+#define PERF_IRQMASK_6328_REG(x) (0x20 + (x) * 0x10)
#define PERF_IRQMASK_6338_REG 0xc
#define PERF_IRQMASK_6345_REG 0xc
#define PERF_IRQMASK_6348_REG 0xc
-#define PERF_IRQMASK_6358_REG 0xc
-#define PERF_IRQMASK_6362_REG 0x20
-#define PERF_IRQMASK_6368_REG 0x20
+#define PERF_IRQMASK_6358_REG(x) (0xc + (x) * 0x2c)
+#define PERF_IRQMASK_6362_REG(x) (0x20 + (x) * 0x10)
+#define PERF_IRQMASK_6368_REG(x) (0x20 + (x) * 0x10)
/* Interrupt Status register */
#define PERF_IRQSTAT_3368_REG 0x10
-#define PERF_IRQSTAT_6328_REG 0x28
+#define PERF_IRQSTAT_6328_REG(x) (0x28 + (x) * 0x10)
#define PERF_IRQSTAT_6338_REG 0x10
#define PERF_IRQSTAT_6345_REG 0x10
#define PERF_IRQSTAT_6348_REG 0x10
-#define PERF_IRQSTAT_6358_REG 0x10
-#define PERF_IRQSTAT_6362_REG 0x28
-#define PERF_IRQSTAT_6368_REG 0x28
+#define PERF_IRQSTAT_6358_REG(x) (0x10 + (x) * 0x2c)
+#define PERF_IRQSTAT_6362_REG(x) (0x28 + (x) * 0x10)
+#define PERF_IRQSTAT_6368_REG(x) (0x28 + (x) * 0x10)
/* External Interrupt Configuration register */
#define PERF_EXTIRQ_CFG_REG_3368 0x14
diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
index e9c408e..bc1167d 100644
--- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
@@ -24,7 +24,7 @@
#define cpu_has_smartmips 0
#define cpu_has_vtag_icache 0
-#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
+#if !defined(CONFIG_SYS_HAS_CPU_BMIPS4350)
#define cpu_has_dc_aliases 0
#endif
diff --git a/arch/mips/include/asm/mach-loongson/boot_param.h b/arch/mips/include/asm/mach-loongson/boot_param.h
index 829a7ec..3388fc5 100644
--- a/arch/mips/include/asm/mach-loongson/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson/boot_param.h
@@ -146,6 +146,9 @@
struct loongson_system_configuration {
u32 nr_cpus;
+ u32 nr_nodes;
+ int cores_per_node;
+ int cores_per_package;
enum loongson_cpu_type cputype;
u64 ht_control_base;
u64 pci_mem_start_addr;
@@ -160,4 +163,5 @@
extern struct efi_memory_map_loongson *loongson_memmap;
extern struct loongson_system_configuration loongson_sysconf;
+extern int cpuhotplug_workaround;
#endif
diff --git a/arch/mips/include/asm/mach-loongson/kernel-entry-init.h b/arch/mips/include/asm/mach-loongson/kernel-entry-init.h
new file mode 100644
index 0000000..df5fca8
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2009 Jiajie Chen (chenjiajie@cse.buaa.edu.cn)
+ * Copyright (C) 2012 Huacai Chen (chenhc@lemote.com)
+ */
+#ifndef __ASM_MACH_LOONGSON_KERNEL_ENTRY_H
+#define __ASM_MACH_LOONGSON_KERNEL_ENTRY_H
+
+/*
+ * Override macros used in arch/mips/kernel/head.S.
+ */
+ .macro kernel_entry_setup
+#ifdef CONFIG_CPU_LOONGSON3
+ .set push
+ .set mips64
+ /* Set LPA on LOONGSON3 config3 */
+ mfc0 t0, $16, 3
+ or t0, (0x1 << 7)
+ mtc0 t0, $16, 3
+ /* Set ELPA on LOONGSON3 pagegrain */
+ li t0, (0x1 << 29)
+ mtc0 t0, $5, 1
+ _ehb
+ .set pop
+#endif
+ .endm
+
+/*
+ * Do SMP slave processor setup.
+ */
+ .macro smp_slave_setup
+#ifdef CONFIG_CPU_LOONGSON3
+ .set push
+ .set mips64
+ /* Set LPA on LOONGSON3 config3 */
+ mfc0 t0, $16, 3
+ or t0, (0x1 << 7)
+ mtc0 t0, $16, 3
+ /* Set ELPA on LOONGSON3 pagegrain */
+ li t0, (0x1 << 29)
+ mtc0 t0, $5, 1
+ _ehb
+ .set pop
+#endif
+ .endm
+
+#endif /* __ASM_MACH_LOONGSON_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index f3fd1eb..92bf76c 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -249,8 +249,15 @@
#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68)
#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
-/* Chip Config */
-#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80)
+#define MAX_PACKAGES 4
+
+/* Chip Config registor of each physical cpu package, PRid >= Loongson-2F */
+extern u64 loongson_chipcfg[MAX_PACKAGES];
+#define LOONGSON_CHIPCFG(id) (*(volatile u32 *)(loongson_chipcfg[id]))
+
+/* Freq Control register of each physical cpu package, PRid >= Loongson-3B */
+extern u64 loongson_freqctrl[MAX_PACKAGES];
+#define LOONGSON_FREQCTRL(id) (*(volatile u32 *)(loongson_freqctrl[id]))
/* pcimap */
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
index 1b1f592..228e3784 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -24,10 +24,10 @@
#endif
-#ifdef CONFIG_LEMOTE_MACH3A
+#ifdef CONFIG_LOONGSON_MACH3X
#define LOONGSON_MACHTYPE MACH_LEMOTE_A1101
-#endif /* CONFIG_LEMOTE_MACH3A */
+#endif /* CONFIG_LOONGSON_MACH3X */
#endif /* __ASM_MACH_LOONGSON_MACHINE_H */
diff --git a/arch/mips/include/asm/mach-loongson/mmzone.h b/arch/mips/include/asm/mach-loongson/mmzone.h
new file mode 100644
index 0000000..37c08a2
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/mmzone.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
+ * Insititute of Computing Technology
+ * Author: Xiang Gao, gaoxiang@ict.ac.cn
+ * Huacai Chen, chenhc@lemote.com
+ * Xiaofu Meng, Shuangshuang Zhang
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+#include <boot_param.h>
+#define NODE_ADDRSPACE_SHIFT 44
+#define NODE0_ADDRSPACE_OFFSET 0x000000000000UL
+#define NODE1_ADDRSPACE_OFFSET 0x100000000000UL
+#define NODE2_ADDRSPACE_OFFSET 0x200000000000UL
+#define NODE3_ADDRSPACE_OFFSET 0x300000000000UL
+
+#define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
+
+#define LEVELS_PER_SLICE 128
+
+struct slice_data {
+ unsigned long irq_enable_mask[2];
+ int level_to_irq[LEVELS_PER_SLICE];
+};
+
+struct hub_data {
+ cpumask_t h_cpus;
+ unsigned long slice_map;
+ unsigned long irq_alloc_mask[2];
+ struct slice_data slice[2];
+};
+
+struct node_data {
+ struct pglist_data pglist;
+ struct hub_data hub;
+ cpumask_t cpumask;
+};
+
+extern struct node_data *__node_data[];
+
+#define NODE_DATA(n) (&__node_data[(n)]->pglist)
+#define hub_data(n) (&__node_data[(n)]->hub)
+
+extern void setup_zero_pages(void);
+extern void __init prom_init_numa_memory(void);
+
+#endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/include/asm/mach-loongson/topology.h b/arch/mips/include/asm/mach-loongson/topology.h
new file mode 100644
index 0000000..5598ba7
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/topology.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_MACH_TOPOLOGY_H
+#define _ASM_MACH_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#define cpu_to_node(cpu) ((cpu) >> 2)
+#define parent_node(node) (node)
+#define cpumask_of_node(node) (&__node_data[(node)]->cpumask)
+
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
+#define cpumask_of_pcibus(bus) (cpu_online_mask)
+
+extern unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+
+#define node_distance(from, to) (__node_distances[(from)][(to)])
+
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h
index 47cfe64..f2c13d2 100644
--- a/arch/mips/include/asm/mach-malta/irq.h
+++ b/arch/mips/include/asm/mach-malta/irq.h
@@ -2,6 +2,7 @@
#define __ASM_MACH_MIPS_IRQ_H
+#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
#define NR_IRQS 256
#include_next <irq.h>
diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h
index 5d154cf..d8106f7 100644
--- a/arch/mips/include/asm/mach-sead3/irq.h
+++ b/arch/mips/include/asm/mach-sead3/irq.h
@@ -1,6 +1,7 @@
#ifndef __ASM_MACH_MIPS_IRQ_H
#define __ASM_MACH_MIPS_IRQ_H
+#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
#define NR_IRQS 256
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index b2048d1..5368891 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -414,7 +414,6 @@
#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
-#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
#define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
#define BONITO_PCITOPHYS(WIN, ADDR, CFG) ( \
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 98e9754..cf3b580 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -265,6 +265,7 @@
#define PG_XIE (_ULCAST_(1) << 30)
#define PG_ELPA (_ULCAST_(1) << 29)
#define PG_ESP (_ULCAST_(1) << 28)
+#define PG_IEC (_ULCAST_(1) << 27)
/*
* R4x00 interrupt enable / cause bits
@@ -630,7 +631,6 @@
#define MIPS_CONF4_MMUSIZEEXT_SHIFT (0)
#define MIPS_CONF4_MMUSIZEEXT (_ULCAST_(255) << 0)
#define MIPS_CONF4_FTLBSETS_SHIFT (0)
-#define MIPS_CONF4_FTLBSETS_SHIFT (0)
#define MIPS_CONF4_FTLBSETS (_ULCAST_(15) << MIPS_CONF4_FTLBSETS_SHIFT)
#define MIPS_CONF4_FTLBWAYS_SHIFT (4)
#define MIPS_CONF4_FTLBWAYS (_ULCAST_(15) << MIPS_CONF4_FTLBWAYS_SHIFT)
@@ -652,6 +652,7 @@
#define MIPS_CONF5_NF (_ULCAST_(1) << 0)
#define MIPS_CONF5_UFR (_ULCAST_(1) << 2)
+#define MIPS_CONF5_MRP (_ULCAST_(1) << 3)
#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27)
#define MIPS_CONF5_EVA (_ULCAST_(1) << 28)
#define MIPS_CONF5_CV (_ULCAST_(1) << 29)
@@ -668,6 +669,12 @@
#define MIPS_CONF7_IAR (_ULCAST_(1) << 10)
#define MIPS_CONF7_AR (_ULCAST_(1) << 16)
+/* MAAR bit definitions */
+#define MIPS_MAAR_ADDR ((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12)
+#define MIPS_MAAR_ADDR_SHIFT 12
+#define MIPS_MAAR_S (_ULCAST_(1) << 1)
+#define MIPS_MAAR_V (_ULCAST_(1) << 0)
+
/* EntryHI bit definition */
#define MIPS_ENTRYHI_EHINV (_ULCAST_(1) << 10)
@@ -706,6 +713,37 @@
#define MIPS_SEGCFG_MK _ULCAST_(1)
#define MIPS_SEGCFG_UK _ULCAST_(0)
+#define MIPS_PWFIELD_GDI_SHIFT 24
+#define MIPS_PWFIELD_GDI_MASK 0x3f000000
+#define MIPS_PWFIELD_UDI_SHIFT 18
+#define MIPS_PWFIELD_UDI_MASK 0x00fc0000
+#define MIPS_PWFIELD_MDI_SHIFT 12
+#define MIPS_PWFIELD_MDI_MASK 0x0003f000
+#define MIPS_PWFIELD_PTI_SHIFT 6
+#define MIPS_PWFIELD_PTI_MASK 0x00000fc0
+#define MIPS_PWFIELD_PTEI_SHIFT 0
+#define MIPS_PWFIELD_PTEI_MASK 0x0000003f
+
+#define MIPS_PWSIZE_GDW_SHIFT 24
+#define MIPS_PWSIZE_GDW_MASK 0x3f000000
+#define MIPS_PWSIZE_UDW_SHIFT 18
+#define MIPS_PWSIZE_UDW_MASK 0x00fc0000
+#define MIPS_PWSIZE_MDW_SHIFT 12
+#define MIPS_PWSIZE_MDW_MASK 0x0003f000
+#define MIPS_PWSIZE_PTW_SHIFT 6
+#define MIPS_PWSIZE_PTW_MASK 0x00000fc0
+#define MIPS_PWSIZE_PTEW_SHIFT 0
+#define MIPS_PWSIZE_PTEW_MASK 0x0000003f
+
+#define MIPS_PWCTL_PWEN_SHIFT 31
+#define MIPS_PWCTL_PWEN_MASK 0x80000000
+#define MIPS_PWCTL_DPH_SHIFT 7
+#define MIPS_PWCTL_DPH_MASK 0x00000080
+#define MIPS_PWCTL_HUGEPG_SHIFT 6
+#define MIPS_PWCTL_HUGEPG_MASK 0x00000060
+#define MIPS_PWCTL_PSN_SHIFT 0
+#define MIPS_PWCTL_PSN_MASK 0x0000003f
+
#ifndef __ASSEMBLY__
/*
@@ -1044,6 +1082,11 @@
#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
+#define read_c0_maar() __read_ulong_c0_register($17, 1)
+#define write_c0_maar(val) __write_ulong_c0_register($17, 1, val)
+#define read_c0_maari() __read_32bit_c0_register($17, 2)
+#define write_c0_maari(val) __write_32bit_c0_register($17, 2, val)
+
/*
* The WatchLo register. There may be up to 8 of them.
*/
@@ -1201,6 +1244,19 @@
#define read_c0_segctl2() __read_32bit_c0_register($5, 4)
#define write_c0_segctl2(val) __write_32bit_c0_register($5, 4, val)
+/* Hardware Page Table Walker */
+#define read_c0_pwbase() __read_ulong_c0_register($5, 5)
+#define write_c0_pwbase(val) __write_ulong_c0_register($5, 5, val)
+
+#define read_c0_pwfield() __read_ulong_c0_register($5, 6)
+#define write_c0_pwfield(val) __write_ulong_c0_register($5, 6, val)
+
+#define read_c0_pwsize() __read_ulong_c0_register($5, 7)
+#define write_c0_pwsize(val) __write_ulong_c0_register($5, 7, val)
+
+#define read_c0_pwctl() __read_32bit_c0_register($6, 6)
+#define write_c0_pwctl(val) __write_32bit_c0_register($6, 6, val)
+
/* Cavium OCTEON (cnMIPS) */
#define read_c0_cvmcount() __read_ulong_c0_register($9, 6)
#define write_c0_cvmcount(val) __write_ulong_c0_register($9, 6, val)
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 2e373da..2f82568 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -20,10 +20,20 @@
#include <asm/tlbflush.h>
#include <asm-generic/mm_hooks.h>
+#define htw_set_pwbase(pgd) \
+do { \
+ if (cpu_has_htw) { \
+ write_c0_pwbase(pgd); \
+ back_to_back_c0_hazard(); \
+ htw_reset(); \
+ } \
+} while (0)
+
#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
do { \
extern void tlbmiss_handler_setup_pgd(unsigned long); \
tlbmiss_handler_setup_pgd((unsigned long)(pgd)); \
+ htw_set_pwbase((unsigned long)pgd); \
} while (0)
#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
diff --git a/arch/mips/include/asm/msa.h b/arch/mips/include/asm/msa.h
index 538f6d4..af5638b 100644
--- a/arch/mips/include/asm/msa.h
+++ b/arch/mips/include/asm/msa.h
@@ -12,8 +12,11 @@
#include <asm/mipsregs.h>
+#ifndef __ASSEMBLY__
+
extern void _save_msa(struct task_struct *);
extern void _restore_msa(struct task_struct *);
+extern void _init_msa_upper(void);
static inline void enable_msa(void)
{
@@ -112,10 +115,10 @@
" .set push\n" \
" .set noat\n" \
" .insn\n" \
- " .word #CFC_MSA_INSN | (" #cs " << 11)\n" \
+ " .word %1 | (" #cs " << 11)\n" \
" move %0, $1\n" \
" .set pop\n" \
- : "=r"(reg)); \
+ : "=r"(reg) : "i"(CFC_MSA_INSN)); \
return reg; \
} \
\
@@ -126,22 +129,13 @@
" .set noat\n" \
" move $1, %0\n" \
" .insn\n" \
- " .word #CTC_MSA_INSN | (" #cs " << 6)\n" \
+ " .word %1 | (" #cs " << 6)\n" \
" .set pop\n" \
- : : "r"(val)); \
+ : : "r"(val), "i"(CTC_MSA_INSN)); \
}
#endif /* !TOOLCHAIN_SUPPORTS_MSA */
-#define MSA_IR 0
-#define MSA_CSR 1
-#define MSA_ACCESS 2
-#define MSA_SAVE 3
-#define MSA_MODIFY 4
-#define MSA_REQUEST 5
-#define MSA_MAP 6
-#define MSA_UNMAP 7
-
__BUILD_MSA_CTL_REG(ir, 0)
__BUILD_MSA_CTL_REG(csr, 1)
__BUILD_MSA_CTL_REG(access, 2)
@@ -151,6 +145,17 @@
__BUILD_MSA_CTL_REG(map, 6)
__BUILD_MSA_CTL_REG(unmap, 7)
+#endif /* !__ASSEMBLY__ */
+
+#define MSA_IR 0
+#define MSA_CSR 1
+#define MSA_ACCESS 2
+#define MSA_SAVE 3
+#define MSA_MODIFY 4
+#define MSA_REQUEST 5
+#define MSA_MAP 6
+#define MSA_UNMAP 7
+
/* MSA Implementation Register (MSAIR) */
#define MSA_IR_REVB 0
#define MSA_IR_REVF (_ULCAST_(0xff) << MSA_IR_REVB)
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index 7b7818d..2298199 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -228,6 +228,7 @@
*/
CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
CVMX_BOARD_TYPE_UBNT_E100 = 20002,
+ CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
/* The remaining range is reserved for future use. */
@@ -327,6 +328,7 @@
/* Customer private range */
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
}
return "Unsupported Board";
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index b4204c1..cd7d606 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -18,6 +18,18 @@
#include <asm-generic/pgtable-nopmd.h>
+extern int temp_tlb_entry __cpuinitdata;
+
+/*
+ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
+ * starting at the top and working down. This is for populating the
+ * TLB before trap_init() puts the TLB miss handler in place. It
+ * should be used only for entries matching the actual page tables,
+ * to prevent inconsistencies.
+ */
+extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask);
+
/*
* Basically we have the same two-level (which is the logical three level
* Linux page table layout folded) page tables as the i386. Some day
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 539ddd1..027c74d 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -97,6 +97,31 @@
#define pmd_page_vaddr(pmd) pmd_val(pmd)
+#define htw_stop() \
+do { \
+ if (cpu_has_htw) \
+ write_c0_pwctl(read_c0_pwctl() & \
+ ~(1 << MIPS_PWCTL_PWEN_SHIFT)); \
+} while(0)
+
+#define htw_start() \
+do { \
+ if (cpu_has_htw) \
+ write_c0_pwctl(read_c0_pwctl() | \
+ (1 << MIPS_PWCTL_PWEN_SHIFT)); \
+} while(0)
+
+
+#define htw_reset() \
+do { \
+ if (cpu_has_htw) { \
+ htw_stop(); \
+ back_to_back_c0_hazard(); \
+ htw_start(); \
+ back_to_back_c0_hazard(); \
+ } \
+} while(0)
+
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
@@ -131,6 +156,7 @@
null.pte_low = null.pte_high = _PAGE_GLOBAL;
set_pte_at(mm, addr, ptep, null);
+ htw_reset();
}
#else
@@ -168,6 +194,7 @@
else
#endif
set_pte_at(mm, addr, ptep, __pte(0));
+ htw_reset();
}
#endif
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index ad70cba..5733fab 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -238,7 +238,13 @@
unsigned long seg;
} mm_segment_t;
-#define ARCH_MIN_TASKALIGN 8
+#ifdef CONFIG_CPU_HAS_MSA
+# define ARCH_MIN_TASKALIGN 16
+# define FPU_ALIGN __aligned(16)
+#else
+# define ARCH_MIN_TASKALIGN 8
+# define FPU_ALIGN
+#endif
struct mips_abi;
@@ -255,7 +261,7 @@
unsigned long cp0_status;
/* Saved fpu/fpu emulator stuff. */
- struct mips_fpu_struct fpu;
+ struct mips_fpu_struct fpu FPU_ALIGN;
#ifdef CONFIG_MIPS_MT_FPAFF
/* Emulated instruction count */
unsigned long emulated_fp;
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 7e6e682..fc783f8 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -23,7 +23,7 @@
struct pt_regs {
#ifdef CONFIG_32BIT
/* Pad bytes for argument save space on the stack. */
- unsigned long pad0[6];
+ unsigned long pad0[8];
#endif
/* Saved main processor registers. */
@@ -47,8 +47,10 @@
struct task_struct;
-extern int ptrace_getregs(struct task_struct *child, __s64 __user *data);
-extern int ptrace_setregs(struct task_struct *child, __s64 __user *data);
+extern int ptrace_getregs(struct task_struct *child,
+ struct user_pt_regs __user *data);
+extern int ptrace_setregs(struct task_struct *child,
+ struct user_pt_regs __user *data);
extern int ptrace_getfpregs(struct task_struct *child, __u32 __user *data);
extern int ptrace_setfpregs(struct task_struct *child, __u32 __user *data);
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
index 910e71a..84dc7e2 100644
--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -1,128 +1 @@
-/*
- * Various register offset definitions for debuggers, core file
- * examiners and whatnot.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1999 Ralf Baechle
- * Copyright (C) 1995, 1999 Silicon Graphics
- */
-#ifndef __ASM_MIPS_REG_H
-#define __ASM_MIPS_REG_H
-
-
-#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H)
-
-#define EF_R0 6
-#define EF_R1 7
-#define EF_R2 8
-#define EF_R3 9
-#define EF_R4 10
-#define EF_R5 11
-#define EF_R6 12
-#define EF_R7 13
-#define EF_R8 14
-#define EF_R9 15
-#define EF_R10 16
-#define EF_R11 17
-#define EF_R12 18
-#define EF_R13 19
-#define EF_R14 20
-#define EF_R15 21
-#define EF_R16 22
-#define EF_R17 23
-#define EF_R18 24
-#define EF_R19 25
-#define EF_R20 26
-#define EF_R21 27
-#define EF_R22 28
-#define EF_R23 29
-#define EF_R24 30
-#define EF_R25 31
-
-/*
- * k0/k1 unsaved
- */
-#define EF_R26 32
-#define EF_R27 33
-
-#define EF_R28 34
-#define EF_R29 35
-#define EF_R30 36
-#define EF_R31 37
-
-/*
- * Saved special registers
- */
-#define EF_LO 38
-#define EF_HI 39
-
-#define EF_CP0_EPC 40
-#define EF_CP0_BADVADDR 41
-#define EF_CP0_STATUS 42
-#define EF_CP0_CAUSE 43
-#define EF_UNUSED0 44
-
-#define EF_SIZE 180
-
-#endif
-
-#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
-
-#define EF_R0 0
-#define EF_R1 1
-#define EF_R2 2
-#define EF_R3 3
-#define EF_R4 4
-#define EF_R5 5
-#define EF_R6 6
-#define EF_R7 7
-#define EF_R8 8
-#define EF_R9 9
-#define EF_R10 10
-#define EF_R11 11
-#define EF_R12 12
-#define EF_R13 13
-#define EF_R14 14
-#define EF_R15 15
-#define EF_R16 16
-#define EF_R17 17
-#define EF_R18 18
-#define EF_R19 19
-#define EF_R20 20
-#define EF_R21 21
-#define EF_R22 22
-#define EF_R23 23
-#define EF_R24 24
-#define EF_R25 25
-
-/*
- * k0/k1 unsaved
- */
-#define EF_R26 26
-#define EF_R27 27
-
-
-#define EF_R28 28
-#define EF_R29 29
-#define EF_R30 30
-#define EF_R31 31
-
-/*
- * Saved special registers
- */
-#define EF_LO 32
-#define EF_HI 33
-
-#define EF_CP0_EPC 34
-#define EF_CP0_BADVADDR 35
-#define EF_CP0_STATUS 36
-#define EF_CP0_CAUSE 37
-
-#define EF_SIZE 304 /* size in bytes */
-
-#endif /* CONFIG_64BIT */
-
-#endif /* __ASM_MIPS_REG_H */
+#include <uapi/asm/reg.h>
diff --git a/arch/mips/include/asm/smp-cps.h b/arch/mips/include/asm/smp-cps.h
index a06a08a..326c16e 100644
--- a/arch/mips/include/asm/smp-cps.h
+++ b/arch/mips/include/asm/smp-cps.h
@@ -31,11 +31,19 @@
extern struct vpe_boot_config *mips_cps_boot_vpes(void);
-extern bool mips_cps_smp_in_use(void);
-
extern void mips_cps_pm_save(void);
extern void mips_cps_pm_restore(void);
+#ifdef CONFIG_MIPS_CPS
+
+extern bool mips_cps_smp_in_use(void);
+
+#else /* !CONFIG_MIPS_CPS */
+
+static inline bool mips_cps_smp_in_use(void) { return false; }
+
+#endif /* !CONFIG_MIPS_CPS */
+
#else /* __ASSEMBLY__ */
.extern mips_cps_bootcfg;
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index b037334..1e0f20a 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -22,6 +22,7 @@
extern int smp_num_siblings;
extern cpumask_t cpu_sibling_map[];
+extern cpumask_t cpu_core_map[];
#define raw_smp_processor_id() (current_thread_info()->cpu)
@@ -36,6 +37,11 @@
#define NO_PROC_ID (-1)
+#define topology_physical_package_id(cpu) (cpu_data[cpu].package)
+#define topology_core_id(cpu) (cpu_data[cpu].core)
+#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
+#define topology_thread_cpumask(cpu) (&cpu_sibling_map[cpu])
+
#define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */
#define SMP_CALL_FUNCTION 0x2
/* Octeon - Tell another core to flush its icache */
diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h
index d2da53c..b1071c1 100644
--- a/arch/mips/include/asm/sparsemem.h
+++ b/arch/mips/include/asm/sparsemem.h
@@ -11,7 +11,7 @@
#else
# define SECTION_SIZE_BITS 28
#endif
-#define MAX_PHYSMEM_BITS 35
+#define MAX_PHYSMEM_BITS 48
#endif /* CONFIG_SPARSEMEM */
#endif /* _MIPS_SPARSEMEM_H */
diff --git a/arch/mips/include/asm/user.h b/arch/mips/include/asm/user.h
deleted file mode 100644
index 6bad61b..0000000
--- a/arch/mips/include/asm/user.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
- */
-#ifndef _ASM_USER_H
-#define _ASM_USER_H
-
-#include <asm/page.h>
-#include <asm/reg.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd, NOT the irix-core). The file
- * contents are as follows:
- *
- * upage: 1 page consisting of a user struct that tells gdb
- * what is present in the file. Directly after this is a
- * copy of the task_struct, which is currently not used by gdb,
- * but it may come in handy at some point. All of the registers
- * are stored as part of the upage. The upage should always be
- * only one page long.
- * data: The data segment follows next. We use current->end_text to
- * current->brk to pick up all of the user variables, plus any memory
- * that may have been sbrk'ed. No attempt is made to determine if a
- * page is demand-zero or if a page is totally unused, we just cover
- * the entire range. All of the addresses are rounded in such a way
- * that an integral number of pages is written.
- * stack: We need the stack information in order to get a meaningful
- * backtrace. We need to write the data from usp to
- * current->start_stack, so we round each of these in order to be able
- * to write an integer number of pages.
- */
-struct user {
- unsigned long regs[EF_SIZE / /* integer and fp regs */
- sizeof(unsigned long) + 64];
- size_t u_tsize; /* text size (pages) */
- size_t u_dsize; /* data size (pages) */
- size_t u_ssize; /* stack size (pages) */
- unsigned long start_code; /* text starting address */
- unsigned long start_data; /* data starting address */
- unsigned long start_stack; /* stack starting address */
- long int signal; /* signal causing core dump */
- unsigned long u_ar0; /* help gdb find registers */
- unsigned long magic; /* identifies a core file */
- char u_comm[32]; /* user command name */
-};
-
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_DATA_START_ADDR (u.start_data)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _ASM_USER_H */
diff --git a/arch/mips/include/uapi/asm/ptrace.h b/arch/mips/include/uapi/asm/ptrace.h
index b26f7e3..bbcfb8b 100644
--- a/arch/mips/include/uapi/asm/ptrace.h
+++ b/arch/mips/include/uapi/asm/ptrace.h
@@ -22,24 +22,27 @@
#define DSP_CONTROL 77
#define ACX 78
-#ifndef __KERNEL__
/*
- * This struct defines the way the registers are stored on the stack during a
- * system call/exception. As usual the registers k0/k1 aren't being saved.
+ * This struct defines the registers as used by PTRACE_{GET,SET}REGS. The
+ * format is the same for both 32- and 64-bit processes. Registers for 32-bit
+ * processes are sign extended.
*/
+#ifdef __KERNEL__
+struct user_pt_regs {
+#else
struct pt_regs {
+#endif
/* Saved main processor registers. */
- unsigned long regs[32];
+ __u64 regs[32];
/* Saved special registers. */
- unsigned long cp0_status;
- unsigned long hi;
- unsigned long lo;
- unsigned long cp0_badvaddr;
- unsigned long cp0_cause;
- unsigned long cp0_epc;
+ __u64 lo;
+ __u64 hi;
+ __u64 cp0_epc;
+ __u64 cp0_badvaddr;
+ __u64 cp0_status;
+ __u64 cp0_cause;
} __attribute__ ((aligned (8)));
-#endif /* __KERNEL__ */
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
#define PTRACE_GETREGS 12
diff --git a/arch/mips/include/uapi/asm/reg.h b/arch/mips/include/uapi/asm/reg.h
new file mode 100644
index 0000000..081e377
--- /dev/null
+++ b/arch/mips/include/uapi/asm/reg.h
@@ -0,0 +1,206 @@
+/*
+ * Various register offset definitions for debuggers, core file
+ * examiners and whatnot.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1995, 1999 Silicon Graphics
+ */
+#ifndef __UAPI_ASM_MIPS_REG_H
+#define __UAPI_ASM_MIPS_REG_H
+
+#define MIPS32_EF_R0 6
+#define MIPS32_EF_R1 7
+#define MIPS32_EF_R2 8
+#define MIPS32_EF_R3 9
+#define MIPS32_EF_R4 10
+#define MIPS32_EF_R5 11
+#define MIPS32_EF_R6 12
+#define MIPS32_EF_R7 13
+#define MIPS32_EF_R8 14
+#define MIPS32_EF_R9 15
+#define MIPS32_EF_R10 16
+#define MIPS32_EF_R11 17
+#define MIPS32_EF_R12 18
+#define MIPS32_EF_R13 19
+#define MIPS32_EF_R14 20
+#define MIPS32_EF_R15 21
+#define MIPS32_EF_R16 22
+#define MIPS32_EF_R17 23
+#define MIPS32_EF_R18 24
+#define MIPS32_EF_R19 25
+#define MIPS32_EF_R20 26
+#define MIPS32_EF_R21 27
+#define MIPS32_EF_R22 28
+#define MIPS32_EF_R23 29
+#define MIPS32_EF_R24 30
+#define MIPS32_EF_R25 31
+
+/*
+ * k0/k1 unsaved
+ */
+#define MIPS32_EF_R26 32
+#define MIPS32_EF_R27 33
+
+#define MIPS32_EF_R28 34
+#define MIPS32_EF_R29 35
+#define MIPS32_EF_R30 36
+#define MIPS32_EF_R31 37
+
+/*
+ * Saved special registers
+ */
+#define MIPS32_EF_LO 38
+#define MIPS32_EF_HI 39
+
+#define MIPS32_EF_CP0_EPC 40
+#define MIPS32_EF_CP0_BADVADDR 41
+#define MIPS32_EF_CP0_STATUS 42
+#define MIPS32_EF_CP0_CAUSE 43
+#define MIPS32_EF_UNUSED0 44
+
+#define MIPS32_EF_SIZE 180
+
+#define MIPS64_EF_R0 0
+#define MIPS64_EF_R1 1
+#define MIPS64_EF_R2 2
+#define MIPS64_EF_R3 3
+#define MIPS64_EF_R4 4
+#define MIPS64_EF_R5 5
+#define MIPS64_EF_R6 6
+#define MIPS64_EF_R7 7
+#define MIPS64_EF_R8 8
+#define MIPS64_EF_R9 9
+#define MIPS64_EF_R10 10
+#define MIPS64_EF_R11 11
+#define MIPS64_EF_R12 12
+#define MIPS64_EF_R13 13
+#define MIPS64_EF_R14 14
+#define MIPS64_EF_R15 15
+#define MIPS64_EF_R16 16
+#define MIPS64_EF_R17 17
+#define MIPS64_EF_R18 18
+#define MIPS64_EF_R19 19
+#define MIPS64_EF_R20 20
+#define MIPS64_EF_R21 21
+#define MIPS64_EF_R22 22
+#define MIPS64_EF_R23 23
+#define MIPS64_EF_R24 24
+#define MIPS64_EF_R25 25
+
+/*
+ * k0/k1 unsaved
+ */
+#define MIPS64_EF_R26 26
+#define MIPS64_EF_R27 27
+
+
+#define MIPS64_EF_R28 28
+#define MIPS64_EF_R29 29
+#define MIPS64_EF_R30 30
+#define MIPS64_EF_R31 31
+
+/*
+ * Saved special registers
+ */
+#define MIPS64_EF_LO 32
+#define MIPS64_EF_HI 33
+
+#define MIPS64_EF_CP0_EPC 34
+#define MIPS64_EF_CP0_BADVADDR 35
+#define MIPS64_EF_CP0_STATUS 36
+#define MIPS64_EF_CP0_CAUSE 37
+
+#define MIPS64_EF_SIZE 304 /* size in bytes */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+#define EF_R0 MIPS32_EF_R0
+#define EF_R1 MIPS32_EF_R1
+#define EF_R2 MIPS32_EF_R2
+#define EF_R3 MIPS32_EF_R3
+#define EF_R4 MIPS32_EF_R4
+#define EF_R5 MIPS32_EF_R5
+#define EF_R6 MIPS32_EF_R6
+#define EF_R7 MIPS32_EF_R7
+#define EF_R8 MIPS32_EF_R8
+#define EF_R9 MIPS32_EF_R9
+#define EF_R10 MIPS32_EF_R10
+#define EF_R11 MIPS32_EF_R11
+#define EF_R12 MIPS32_EF_R12
+#define EF_R13 MIPS32_EF_R13
+#define EF_R14 MIPS32_EF_R14
+#define EF_R15 MIPS32_EF_R15
+#define EF_R16 MIPS32_EF_R16
+#define EF_R17 MIPS32_EF_R17
+#define EF_R18 MIPS32_EF_R18
+#define EF_R19 MIPS32_EF_R19
+#define EF_R20 MIPS32_EF_R20
+#define EF_R21 MIPS32_EF_R21
+#define EF_R22 MIPS32_EF_R22
+#define EF_R23 MIPS32_EF_R23
+#define EF_R24 MIPS32_EF_R24
+#define EF_R25 MIPS32_EF_R25
+#define EF_R26 MIPS32_EF_R26
+#define EF_R27 MIPS32_EF_R27
+#define EF_R28 MIPS32_EF_R28
+#define EF_R29 MIPS32_EF_R29
+#define EF_R30 MIPS32_EF_R30
+#define EF_R31 MIPS32_EF_R31
+#define EF_LO MIPS32_EF_LO
+#define EF_HI MIPS32_EF_HI
+#define EF_CP0_EPC MIPS32_EF_CP0_EPC
+#define EF_CP0_BADVADDR MIPS32_EF_CP0_BADVADDR
+#define EF_CP0_STATUS MIPS32_EF_CP0_STATUS
+#define EF_CP0_CAUSE MIPS32_EF_CP0_CAUSE
+#define EF_UNUSED0 MIPS32_EF_UNUSED0
+#define EF_SIZE MIPS32_EF_SIZE
+
+#elif _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define EF_R0 MIPS64_EF_R0
+#define EF_R1 MIPS64_EF_R1
+#define EF_R2 MIPS64_EF_R2
+#define EF_R3 MIPS64_EF_R3
+#define EF_R4 MIPS64_EF_R4
+#define EF_R5 MIPS64_EF_R5
+#define EF_R6 MIPS64_EF_R6
+#define EF_R7 MIPS64_EF_R7
+#define EF_R8 MIPS64_EF_R8
+#define EF_R9 MIPS64_EF_R9
+#define EF_R10 MIPS64_EF_R10
+#define EF_R11 MIPS64_EF_R11
+#define EF_R12 MIPS64_EF_R12
+#define EF_R13 MIPS64_EF_R13
+#define EF_R14 MIPS64_EF_R14
+#define EF_R15 MIPS64_EF_R15
+#define EF_R16 MIPS64_EF_R16
+#define EF_R17 MIPS64_EF_R17
+#define EF_R18 MIPS64_EF_R18
+#define EF_R19 MIPS64_EF_R19
+#define EF_R20 MIPS64_EF_R20
+#define EF_R21 MIPS64_EF_R21
+#define EF_R22 MIPS64_EF_R22
+#define EF_R23 MIPS64_EF_R23
+#define EF_R24 MIPS64_EF_R24
+#define EF_R25 MIPS64_EF_R25
+#define EF_R26 MIPS64_EF_R26
+#define EF_R27 MIPS64_EF_R27
+#define EF_R28 MIPS64_EF_R28
+#define EF_R29 MIPS64_EF_R29
+#define EF_R30 MIPS64_EF_R30
+#define EF_R31 MIPS64_EF_R31
+#define EF_LO MIPS64_EF_LO
+#define EF_HI MIPS64_EF_HI
+#define EF_CP0_EPC MIPS64_EF_CP0_EPC
+#define EF_CP0_BADVADDR MIPS64_EF_CP0_BADVADDR
+#define EF_CP0_STATUS MIPS64_EF_CP0_STATUS
+#define EF_CP0_CAUSE MIPS64_EF_CP0_CAUSE
+#define EF_SIZE MIPS64_EF_SIZE
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* __UAPI_ASM_MIPS_REG_H */
diff --git a/arch/mips/jz4740/clock-debugfs.c b/arch/mips/jz4740/clock-debugfs.c
index a8acdef..325422d0 100644
--- a/arch/mips/jz4740/clock-debugfs.c
+++ b/arch/mips/jz4740/clock-debugfs.c
@@ -87,8 +87,7 @@
/* TODO: Locking */
void jz4740_clock_debugfs_update_parent(struct clk *clk)
{
- if (clk->debugfs_parent_entry)
- debugfs_remove(clk->debugfs_parent_entry);
+ debugfs_remove(clk->debugfs_parent_entry);
if (clk->parent) {
char parent_path[100];
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 4bb5107..b1d84bd 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -234,6 +234,7 @@
thread.fpu.fpr[31].val64[FPR_IDX(64, 0)]);
OFFSET(THREAD_FCR31, task_struct, thread.fpu.fcr31);
+ OFFSET(THREAD_MSA_CSR, task_struct, thread.fpu.msacsr);
BLANK();
}
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index 7faf5f2..9287678 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -72,22 +72,6 @@
#include <asm/processor.h>
-/*
- * When this file is selected, we are definitely running a 64bit kernel.
- * So using the right regs define in asm/reg.h
- */
-#define WANT_COMPAT_REG_H
-
-/* These MUST be defined before elf.h gets included */
-extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
-#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
-#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest) \
-({ \
- int __res = 1; \
- elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk)); \
- __res; \
-})
-
#include <linux/module.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
@@ -145,28 +129,6 @@
value->tv_usec = rem / NSEC_PER_USEC;
}
-void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
-{
- int i;
-
- for (i = 0; i < EF_R0; i++)
- grp[i] = 0;
- grp[EF_R0] = 0;
- for (i = 1; i <= 31; i++)
- grp[EF_R0 + i] = (elf_greg_t) regs->regs[i];
- grp[EF_R26] = 0;
- grp[EF_R27] = 0;
- grp[EF_LO] = (elf_greg_t) regs->lo;
- grp[EF_HI] = (elf_greg_t) regs->hi;
- grp[EF_CP0_EPC] = (elf_greg_t) regs->cp0_epc;
- grp[EF_CP0_BADVADDR] = (elf_greg_t) regs->cp0_badvaddr;
- grp[EF_CP0_STATUS] = (elf_greg_t) regs->cp0_status;
- grp[EF_CP0_CAUSE] = (elf_greg_t) regs->cp0_cause;
-#ifdef EF_UNUSED0
- grp[EF_UNUSED0] = 0;
-#endif
-}
-
MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index d74f957..e34b10b 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -54,6 +54,20 @@
__setup("nodsp", dsp_disable);
+static int mips_htw_disabled;
+
+static int __init htw_disable(char *s)
+{
+ mips_htw_disabled = 1;
+ cpu_data[0].options &= ~MIPS_CPU_HTW;
+ write_c0_pwctl(read_c0_pwctl() &
+ ~(1 << MIPS_PWCTL_PWEN_SHIFT));
+
+ return 1;
+}
+
+__setup("nohtw", htw_disable);
+
static inline void check_errata(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
@@ -130,14 +144,13 @@
static inline unsigned long cpu_get_msa_id(void)
{
- unsigned long status, conf5, msa_id;
+ unsigned long status, msa_id;
status = read_c0_status();
__enable_fpu(FPU_64BIT);
- conf5 = read_c0_config5();
enable_msa();
msa_id = read_msa_ir();
- write_c0_config5(conf5);
+ disable_msa();
write_c0_status(status);
return msa_id;
}
@@ -321,6 +334,9 @@
c->options |= MIPS_CPU_SEGMENTS;
if (config3 & MIPS_CONF3_MSA)
c->ases |= MIPS_ASE_MSA;
+ /* Only tested on 32-bit cores */
+ if ((config3 & MIPS_CONF3_PW) && config_enabled(CONFIG_32BIT))
+ c->options |= MIPS_CPU_HTW;
return config3 & MIPS_CONF_M;
}
@@ -389,6 +405,8 @@
if (config5 & MIPS_CONF5_EVA)
c->options |= MIPS_CPU_EVA;
+ if (config5 & MIPS_CONF5_MRP)
+ c->options |= MIPS_CPU_MAAR;
return config5 & MIPS_CONF_M;
}
@@ -421,6 +439,15 @@
mips_probe_watch_registers(c);
+ if (cpu_has_rixi) {
+ /* Enable the RIXI exceptions */
+ write_c0_pagegrain(read_c0_pagegrain() | PG_IEC);
+ back_to_back_c0_hazard();
+ /* Verify the IEC bit is set */
+ if (read_c0_pagegrain() & PG_IEC)
+ c->options |= MIPS_CPU_RIXIEX;
+ }
+
#ifndef CONFIG_MIPS_CPS
if (cpu_has_mips_r2) {
c->core = get_ebase_cpunum();
@@ -740,6 +767,12 @@
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
break;
+ case PRID_REV_LOONGSON3B_R1:
+ case PRID_REV_LOONGSON3B_R2:
+ c->cputype = CPU_LOONGSON3;
+ __cpu_name[cpu] = "ICT Loongson-3";
+ set_elf_platform(cpu, "loongson3b");
+ break;
}
set_isa(c, MIPS_CPU_ISA_III);
@@ -1187,6 +1220,12 @@
if (mips_dsp_disabled)
c->ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P);
+ if (mips_htw_disabled) {
+ c->options &= ~MIPS_CPU_HTW;
+ write_c0_pwctl(read_c0_pwctl() &
+ ~(1 << MIPS_PWCTL_PWEN_SHIFT));
+ }
+
if (c->options & MIPS_CPU_FPU) {
c->fpu_id = cpu_get_fpu_id();
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index d5e59b8..9e9d8b9 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -28,6 +28,18 @@
/* The index into this array is the vector # of the interrupt. */
struct gic_shared_intr_map gic_shared_intr_map[GIC_NUM_INTRS];
+struct gic_pcpu_mask {
+ DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS);
+};
+
+struct gic_pending_regs {
+ DECLARE_BITMAP(pending, GIC_NUM_INTRS);
+};
+
+struct gic_intrmask_regs {
+ DECLARE_BITMAP(intrmask, GIC_NUM_INTRS);
+};
+
static struct gic_pcpu_mask pcpu_masks[NR_CPUS];
static struct gic_pending_regs pending_regs[NR_CPUS];
static struct gic_intrmask_regs intrmask_regs[NR_CPUS];
@@ -177,7 +189,7 @@
return 0;
}
-unsigned int gic_get_int(void)
+void gic_get_int_mask(unsigned long *dst, const unsigned long *src)
{
unsigned int i;
unsigned long *pending, *intrmask, *pcpu_mask;
@@ -202,8 +214,17 @@
bitmap_and(pending, pending, intrmask, GIC_NUM_INTRS);
bitmap_and(pending, pending, pcpu_mask, GIC_NUM_INTRS);
+ bitmap_and(dst, src, pending, GIC_NUM_INTRS);
+}
- return find_first_bit(pending, GIC_NUM_INTRS);
+unsigned int gic_get_int(void)
+{
+ DECLARE_BITMAP(interrupts, GIC_NUM_INTRS);
+
+ bitmap_fill(interrupts, GIC_NUM_INTRS);
+ gic_get_int_mask(interrupts, interrupts);
+
+ return find_first_bit(interrupts, GIC_NUM_INTRS);
}
static void gic_mask_irq(struct irq_data *d)
@@ -301,9 +322,10 @@
/* Init Intr Masks */
GIC_CLR_INTR_MASK(intr);
+
/* Initialise per-cpu Interrupt software masks */
- if (flags & GIC_FLAG_IPI)
- set_bit(intr, pcpu_masks[cpu].pcpu_mask);
+ set_bit(intr, pcpu_masks[cpu].pcpu_mask);
+
if ((flags & GIC_FLAG_TRANSPARENT) && (cpu_has_veic == 0))
GIC_SET_INTR_MASK(intr);
if (trigtype == GIC_TRIG_EDGE)
@@ -342,8 +364,6 @@
cpu = intrmap[i].cpunum;
if (cpu == GIC_UNUSED)
continue;
- if (cpu == 0 && i != 0 && intrmap[i].flags == 0)
- continue;
gic_setup_intr(i,
intrmap[i].cpunum,
intrmap[i].pin + pin_offset,
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 4f2d9de..14bf74b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1386,6 +1386,9 @@
/* proAptiv */
#define IS_BOTH_COUNTERS_PROAPTIV_EVENT(b) \
((b) == 0 || (b) == 1)
+/* P5600 */
+#define IS_BOTH_COUNTERS_P5600_EVENT(b) \
+ ((b) == 0 || (b) == 1)
/* 1004K */
#define IS_BOTH_COUNTERS_1004K_EVENT(b) \
@@ -1420,20 +1423,23 @@
/*
- * User can use 0-255 raw events, where 0-127 for the events of even
- * counters, and 128-255 for odd counters. Note that bit 7 is used to
- * indicate the parity. So, for example, when user wants to take the
- * Event Num of 15 for odd counters (by referring to the user manual),
- * then 128 needs to be added to 15 as the input for the event config,
- * i.e., 143 (0x8F) to be used.
+ * For most cores the user can use 0-255 raw events, where 0-127 for the events
+ * of even counters, and 128-255 for odd counters. Note that bit 7 is used to
+ * indicate the even/odd bank selector. So, for example, when user wants to take
+ * the Event Num of 15 for odd counters (by referring to the user manual), then
+ * 128 needs to be added to 15 as the input for the event config, i.e., 143 (0x8F)
+ * to be used.
+ *
+ * Some newer cores have even more events, in which case the user can use raw
+ * events 0-511, where 0-255 are for the events of even counters, and 256-511
+ * are for odd counters, so bit 8 is used to indicate the even/odd bank selector.
*/
static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
{
+ /* currently most cores have 7-bit event numbers */
unsigned int raw_id = config & 0xff;
unsigned int base_id = raw_id & 0x7f;
- raw_event.event_id = base_id;
-
switch (current_cpu_type()) {
case CPU_24K:
if (IS_BOTH_COUNTERS_24K_EVENT(base_id))
@@ -1485,6 +1491,19 @@
raw_event.range = P;
#endif
break;
+ case CPU_P5600:
+ /* 8-bit event numbers */
+ raw_id = config & 0x1ff;
+ base_id = raw_id & 0xff;
+ if (IS_BOTH_COUNTERS_P5600_EVENT(base_id))
+ raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+ else
+ raw_event.cntr_mask =
+ raw_id > 255 ? CNTR_ODD : CNTR_EVEN;
+#ifdef CONFIG_MIPS_MT_SMP
+ raw_event.range = P;
+#endif
+ break;
case CPU_1004K:
if (IS_BOTH_COUNTERS_1004K_EVENT(base_id))
raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
@@ -1523,6 +1542,8 @@
raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
}
+ raw_event.event_id = base_id;
+
return &raw_event;
}
@@ -1633,6 +1654,11 @@
mipspmu.general_event_map = &mipsxxcore_event_map2;
mipspmu.cache_event_map = &mipsxxcore_cache_map2;
break;
+ case CPU_P5600:
+ mipspmu.name = "mips/P5600";
+ mipspmu.general_event_map = &mipsxxcore_event_map2;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map2;
+ break;
case CPU_1004K:
mipspmu.name = "mips/1004K";
mipspmu.general_event_map = &mipsxxcore_event_map;
diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
index c4c2069..0614717 100644
--- a/arch/mips/kernel/pm-cps.c
+++ b/arch/mips/kernel/pm-cps.c
@@ -149,8 +149,12 @@
/* Setup the VPE to run mips_cps_pm_restore when started again */
if (config_enabled(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) {
+ /* Power gating relies upon CPS SMP */
+ if (!mips_cps_smp_in_use())
+ return -EINVAL;
+
core_cfg = &mips_cps_core_bootcfg[core];
- vpe_cfg = &core_cfg->vpe_config[current_cpu_data.vpe_id];
+ vpe_cfg = &core_cfg->vpe_config[cpu_vpe_id(¤t_cpu_data)];
vpe_cfg->pc = (unsigned long)mips_cps_pm_restore;
vpe_cfg->gp = (unsigned long)current_thread_info();
vpe_cfg->sp = 0;
@@ -376,6 +380,10 @@
memset(relocs, 0, sizeof(relocs));
if (config_enabled(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) {
+ /* Power gating relies upon CPS SMP */
+ if (!mips_cps_smp_in_use())
+ goto out_err;
+
/*
* Save CPU state. Note the non-standard calling convention
* with the return address placed in v0 to avoid clobbering
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 037a44d..097fc8d 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -113,6 +113,7 @@
if (cpu_has_vz) seq_printf(m, "%s", " vz");
if (cpu_has_msa) seq_printf(m, "%s", " msa");
if (cpu_has_eva) seq_printf(m, "%s", " eva");
+ if (cpu_has_htw) seq_printf(m, "%s", " htw");
seq_printf(m, "\n");
if (cpu_has_mmips) {
@@ -123,6 +124,7 @@
cpu_data[n].srsets);
seq_printf(m, "kscratch registers\t: %d\n",
hweight8(cpu_data[n].kscratch_mask));
+ seq_printf(m, "package\t\t\t: %d\n", cpu_data[n].package);
seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core);
sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 0a1ec0f..636b074 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -21,7 +21,6 @@
#include <linux/mman.h>
#include <linux/personality.h>
#include <linux/sys.h>
-#include <linux/user.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/kallsyms.h>
@@ -36,6 +35,7 @@
#include <asm/pgtable.h>
#include <asm/mipsregs.h>
#include <asm/processor.h>
+#include <asm/reg.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/elf.h>
@@ -66,6 +66,7 @@
clear_used_math();
clear_fpu_owner();
init_dsp();
+ clear_thread_flag(TIF_USEDMSA);
clear_thread_flag(TIF_MSA_CTX_LIVE);
disable_msa();
regs->cp0_epc = pc;
@@ -141,6 +142,8 @@
childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
clear_tsk_thread_flag(p, TIF_USEDFPU);
+ clear_tsk_thread_flag(p, TIF_USEDMSA);
+ clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE);
#ifdef CONFIG_MIPS_MT_FPAFF
clear_tsk_thread_flag(p, TIF_FPUBOUND);
@@ -152,61 +155,6 @@
return 0;
}
-/* Fill in the fpu structure for a core dump.. */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t *r)
-{
- int i;
-
- for (i = 0; i < NUM_FPU_REGS; i++)
- memcpy(&r[i], ¤t->thread.fpu.fpr[i], sizeof(*r));
-
- memcpy(&r[NUM_FPU_REGS], ¤t->thread.fpu.fcr31,
- sizeof(current->thread.fpu.fcr31));
-
- return 1;
-}
-
-void elf_dump_regs(elf_greg_t *gp, struct pt_regs *regs)
-{
- int i;
-
- for (i = 0; i < EF_R0; i++)
- gp[i] = 0;
- gp[EF_R0] = 0;
- for (i = 1; i <= 31; i++)
- gp[EF_R0 + i] = regs->regs[i];
- gp[EF_R26] = 0;
- gp[EF_R27] = 0;
- gp[EF_LO] = regs->lo;
- gp[EF_HI] = regs->hi;
- gp[EF_CP0_EPC] = regs->cp0_epc;
- gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr;
- gp[EF_CP0_STATUS] = regs->cp0_status;
- gp[EF_CP0_CAUSE] = regs->cp0_cause;
-#ifdef EF_UNUSED0
- gp[EF_UNUSED0] = 0;
-#endif
-}
-
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
- elf_dump_regs(*regs, task_pt_regs(tsk));
- return 1;
-}
-
-int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpr)
-{
- int i;
-
- for (i = 0; i < NUM_FPU_REGS; i++)
- memcpy(&fpr[i], &t->thread.fpu.fpr[i], sizeof(*fpr));
-
- memcpy(&fpr[NUM_FPU_REGS], &t->thread.fpu.fcr31,
- sizeof(t->thread.fpu.fcr31));
-
- return 1;
-}
-
#ifdef CONFIG_CC_STACKPROTECTOR
#include <linux/stackprotector.h>
unsigned long __stack_chk_guard __read_mostly;
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 3a7f7dd..645b3c4 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -24,7 +24,6 @@
#include <linux/ptrace.h>
#include <linux/regset.h>
#include <linux/smp.h>
-#include <linux/user.h>
#include <linux/security.h>
#include <linux/tracehook.h>
#include <linux/audit.h>
@@ -63,7 +62,7 @@
* for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
* Registers are sign extended to fill the available space.
*/
-int ptrace_getregs(struct task_struct *child, __s64 __user *data)
+int ptrace_getregs(struct task_struct *child, struct user_pt_regs __user *data)
{
struct pt_regs *regs;
int i;
@@ -74,13 +73,13 @@
regs = task_pt_regs(child);
for (i = 0; i < 32; i++)
- __put_user((long)regs->regs[i], data + i);
- __put_user((long)regs->lo, data + EF_LO - EF_R0);
- __put_user((long)regs->hi, data + EF_HI - EF_R0);
- __put_user((long)regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
- __put_user((long)regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
- __put_user((long)regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
- __put_user((long)regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
+ __put_user((long)regs->regs[i], (__s64 __user *)&data->regs[i]);
+ __put_user((long)regs->lo, (__s64 __user *)&data->lo);
+ __put_user((long)regs->hi, (__s64 __user *)&data->hi);
+ __put_user((long)regs->cp0_epc, (__s64 __user *)&data->cp0_epc);
+ __put_user((long)regs->cp0_badvaddr, (__s64 __user *)&data->cp0_badvaddr);
+ __put_user((long)regs->cp0_status, (__s64 __user *)&data->cp0_status);
+ __put_user((long)regs->cp0_cause, (__s64 __user *)&data->cp0_cause);
return 0;
}
@@ -90,7 +89,7 @@
* the 64-bit format. On a 32-bit kernel only the lower order half
* (according to endianness) will be used.
*/
-int ptrace_setregs(struct task_struct *child, __s64 __user *data)
+int ptrace_setregs(struct task_struct *child, struct user_pt_regs __user *data)
{
struct pt_regs *regs;
int i;
@@ -101,10 +100,10 @@
regs = task_pt_regs(child);
for (i = 0; i < 32; i++)
- __get_user(regs->regs[i], data + i);
- __get_user(regs->lo, data + EF_LO - EF_R0);
- __get_user(regs->hi, data + EF_HI - EF_R0);
- __get_user(regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+ __get_user(regs->regs[i], (__s64 __user *)&data->regs[i]);
+ __get_user(regs->lo, (__s64 __user *)&data->lo);
+ __get_user(regs->hi, (__s64 __user *)&data->hi);
+ __get_user(regs->cp0_epc, (__s64 __user *)&data->cp0_epc);
/* badvaddr, status, and cause may not be written. */
@@ -129,7 +128,7 @@
}
__put_user(child->thread.fpu.fcr31, data + 64);
- __put_user(current_cpu_data.fpu_id, data + 65);
+ __put_user(boot_cpu_data.fpu_id, data + 65);
return 0;
}
@@ -247,36 +246,160 @@
/* regset get/set implementations */
-static int gpr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
+#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32)
+
+static int gpr32_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
{
struct pt_regs *regs = task_pt_regs(target);
+ u32 uregs[ELF_NGREG] = {};
+ unsigned i;
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- regs, 0, sizeof(*regs));
+ for (i = MIPS32_EF_R1; i <= MIPS32_EF_R31; i++) {
+ /* k0/k1 are copied as zero. */
+ if (i == MIPS32_EF_R26 || i == MIPS32_EF_R27)
+ continue;
+
+ uregs[i] = regs->regs[i - MIPS32_EF_R0];
+ }
+
+ uregs[MIPS32_EF_LO] = regs->lo;
+ uregs[MIPS32_EF_HI] = regs->hi;
+ uregs[MIPS32_EF_CP0_EPC] = regs->cp0_epc;
+ uregs[MIPS32_EF_CP0_BADVADDR] = regs->cp0_badvaddr;
+ uregs[MIPS32_EF_CP0_STATUS] = regs->cp0_status;
+ uregs[MIPS32_EF_CP0_CAUSE] = regs->cp0_cause;
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0,
+ sizeof(uregs));
}
-static int gpr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
+static int gpr32_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
{
- struct pt_regs newregs;
- int ret;
+ struct pt_regs *regs = task_pt_regs(target);
+ u32 uregs[ELF_NGREG];
+ unsigned start, num_regs, i;
+ int err;
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &newregs,
- 0, sizeof(newregs));
- if (ret)
- return ret;
+ start = pos / sizeof(u32);
+ num_regs = count / sizeof(u32);
- *task_pt_regs(target) = newregs;
+ if (start + num_regs > ELF_NGREG)
+ return -EIO;
+
+ err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, uregs, 0,
+ sizeof(uregs));
+ if (err)
+ return err;
+
+ for (i = start; i < num_regs; i++) {
+ /*
+ * Cast all values to signed here so that if this is a 64-bit
+ * kernel, the supplied 32-bit values will be sign extended.
+ */
+ switch (i) {
+ case MIPS32_EF_R1 ... MIPS32_EF_R25:
+ /* k0/k1 are ignored. */
+ case MIPS32_EF_R28 ... MIPS32_EF_R31:
+ regs->regs[i - MIPS32_EF_R0] = (s32)uregs[i];
+ break;
+ case MIPS32_EF_LO:
+ regs->lo = (s32)uregs[i];
+ break;
+ case MIPS32_EF_HI:
+ regs->hi = (s32)uregs[i];
+ break;
+ case MIPS32_EF_CP0_EPC:
+ regs->cp0_epc = (s32)uregs[i];
+ break;
+ }
+ }
return 0;
}
+#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */
+
+#ifdef CONFIG_64BIT
+
+static int gpr64_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ struct pt_regs *regs = task_pt_regs(target);
+ u64 uregs[ELF_NGREG] = {};
+ unsigned i;
+
+ for (i = MIPS64_EF_R1; i <= MIPS64_EF_R31; i++) {
+ /* k0/k1 are copied as zero. */
+ if (i == MIPS64_EF_R26 || i == MIPS64_EF_R27)
+ continue;
+
+ uregs[i] = regs->regs[i - MIPS64_EF_R0];
+ }
+
+ uregs[MIPS64_EF_LO] = regs->lo;
+ uregs[MIPS64_EF_HI] = regs->hi;
+ uregs[MIPS64_EF_CP0_EPC] = regs->cp0_epc;
+ uregs[MIPS64_EF_CP0_BADVADDR] = regs->cp0_badvaddr;
+ uregs[MIPS64_EF_CP0_STATUS] = regs->cp0_status;
+ uregs[MIPS64_EF_CP0_CAUSE] = regs->cp0_cause;
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0,
+ sizeof(uregs));
+}
+
+static int gpr64_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ struct pt_regs *regs = task_pt_regs(target);
+ u64 uregs[ELF_NGREG];
+ unsigned start, num_regs, i;
+ int err;
+
+ start = pos / sizeof(u64);
+ num_regs = count / sizeof(u64);
+
+ if (start + num_regs > ELF_NGREG)
+ return -EIO;
+
+ err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, uregs, 0,
+ sizeof(uregs));
+ if (err)
+ return err;
+
+ for (i = start; i < num_regs; i++) {
+ switch (i) {
+ case MIPS64_EF_R1 ... MIPS64_EF_R25:
+ /* k0/k1 are ignored. */
+ case MIPS64_EF_R28 ... MIPS64_EF_R31:
+ regs->regs[i - MIPS64_EF_R0] = uregs[i];
+ break;
+ case MIPS64_EF_LO:
+ regs->lo = uregs[i];
+ break;
+ case MIPS64_EF_HI:
+ regs->hi = uregs[i];
+ break;
+ case MIPS64_EF_CP0_EPC:
+ regs->cp0_epc = uregs[i];
+ break;
+ }
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_64BIT */
+
static int fpr_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
@@ -338,14 +461,16 @@
REGSET_FPR,
};
+#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32)
+
static const struct user_regset mips_regsets[] = {
[REGSET_GPR] = {
.core_note_type = NT_PRSTATUS,
.n = ELF_NGREG,
.size = sizeof(unsigned int),
.align = sizeof(unsigned int),
- .get = gpr_get,
- .set = gpr_set,
+ .get = gpr32_get,
+ .set = gpr32_set,
},
[REGSET_FPR] = {
.core_note_type = NT_PRFPREG,
@@ -365,14 +490,18 @@
.n = ARRAY_SIZE(mips_regsets),
};
+#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */
+
+#ifdef CONFIG_64BIT
+
static const struct user_regset mips64_regsets[] = {
[REGSET_GPR] = {
.core_note_type = NT_PRSTATUS,
.n = ELF_NGREG,
.size = sizeof(unsigned long),
.align = sizeof(unsigned long),
- .get = gpr_get,
- .set = gpr_set,
+ .get = gpr64_get,
+ .set = gpr64_set,
},
[REGSET_FPR] = {
.core_note_type = NT_PRFPREG,
@@ -385,25 +514,26 @@
};
static const struct user_regset_view user_mips64_view = {
- .name = "mips",
+ .name = "mips64",
.e_machine = ELF_ARCH,
.ei_osabi = ELF_OSABI,
.regsets = mips64_regsets,
- .n = ARRAY_SIZE(mips_regsets),
+ .n = ARRAY_SIZE(mips64_regsets),
};
+#endif /* CONFIG_64BIT */
+
const struct user_regset_view *task_user_regset_view(struct task_struct *task)
{
#ifdef CONFIG_32BIT
return &user_mips_view;
-#endif
-
+#else
#ifdef CONFIG_MIPS32_O32
- if (test_thread_flag(TIF_32BIT_REGS))
- return &user_mips_view;
+ if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
+ return &user_mips_view;
#endif
-
return &user_mips64_view;
+#endif
}
long arch_ptrace(struct task_struct *child, long request,
@@ -481,7 +611,7 @@
break;
case FPC_EIR:
/* implementation / version register */
- tmp = current_cpu_data.fpu_id;
+ tmp = boot_cpu_data.fpu_id;
break;
case DSP_BASE ... DSP_BASE + 5: {
dspreg_t *dregs;
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index b40c3ca..283b5a1 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -22,7 +22,6 @@
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
-#include <linux/user.h>
#include <linux/security.h>
#include <asm/cpu.h>
@@ -32,6 +31,7 @@
#include <asm/mipsmtregs.h>
#include <asm/pgtable.h>
#include <asm/page.h>
+#include <asm/reg.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
@@ -129,7 +129,7 @@
break;
case FPC_EIR:
/* implementation / version register */
- tmp = current_cpu_data.fpu_id;
+ tmp = boot_cpu_data.fpu_id;
break;
case DSP_BASE ... DSP_BASE + 5: {
dspreg_t *dregs;
@@ -256,11 +256,13 @@
}
case PTRACE_GETREGS:
- ret = ptrace_getregs(child, (__s64 __user *) (__u64) data);
+ ret = ptrace_getregs(child,
+ (struct user_pt_regs __user *) (__u64) data);
break;
case PTRACE_SETREGS:
- ret = ptrace_setregs(child, (__s64 __user *) (__u64) data);
+ ret = ptrace_setregs(child,
+ (struct user_pt_regs __user *) (__u64) data);
break;
case PTRACE_GETFPREGS:
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 81ca3f7..4c4ec18 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -64,8 +64,10 @@
/* Check whether we're saving scalar or vector context. */
bgtz a3, 1f
- /* Save 128b MSA vector context. */
+ /* Save 128b MSA vector context + scalar FP control & status. */
+ cfc1 t1, fcr31
msa_save_all a0
+ sw t1, THREAD_FCR31(a0)
b 2f
1: /* Save 32b/64b scalar FP context. */
@@ -142,6 +144,11 @@
jr ra
END(_restore_msa)
+LEAF(_init_msa_upper)
+ msa_init_all_upper
+ jr ra
+ END(_init_msa_upper)
+
#endif
/*
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 3245474..94a490d 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -67,8 +67,6 @@
/*
* Ok, copy the args from the luser stack to the kernel stack.
- * t3 is the precomputed number of instruction bytes needed to
- * load or store arguments 6-8.
*/
.set push
@@ -495,8 +493,8 @@
PTR sys_tgkill
PTR sys_utimes
PTR sys_mbind
- PTR sys_ni_syscall /* sys_get_mempolicy */
- PTR sys_ni_syscall /* 4270 sys_set_mempolicy */
+ PTR sys_get_mempolicy
+ PTR sys_set_mempolicy /* 4270 */
PTR sys_mq_open
PTR sys_mq_unlink
PTR sys_mq_timedsend
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index be2fedd..0952139 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -347,8 +347,8 @@
PTR sys_tgkill /* 5225 */
PTR sys_utimes
PTR sys_mbind
- PTR sys_ni_syscall /* sys_get_mempolicy */
- PTR sys_ni_syscall /* sys_set_mempolicy */
+ PTR sys_get_mempolicy
+ PTR sys_set_mempolicy
PTR sys_mq_open /* 5230 */
PTR sys_mq_unlink
PTR sys_mq_timedsend
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e543861..03dec5a 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -339,9 +339,9 @@
PTR compat_sys_clock_nanosleep
PTR sys_tgkill
PTR compat_sys_utimes /* 6230 */
- PTR sys_ni_syscall /* sys_mbind */
- PTR sys_ni_syscall /* sys_get_mempolicy */
- PTR sys_ni_syscall /* sys_set_mempolicy */
+ PTR compat_sys_mbind
+ PTR compat_sys_get_mempolicy
+ PTR compat_sys_set_mempolicy
PTR compat_sys_mq_open
PTR sys_mq_unlink /* 6235 */
PTR compat_sys_mq_timedsend
@@ -358,7 +358,7 @@
PTR sys_inotify_init
PTR sys_inotify_add_watch
PTR sys_inotify_rm_watch
- PTR sys_migrate_pages /* 6250 */
+ PTR compat_sys_migrate_pages /* 6250 */
PTR sys_openat
PTR sys_mkdirat
PTR sys_mknodat
@@ -379,7 +379,7 @@
PTR sys_sync_file_range
PTR sys_tee
PTR compat_sys_vmsplice /* 6270 */
- PTR sys_move_pages
+ PTR compat_sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list
PTR compat_sys_kexec_load
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index f1343cc..18cfa11 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -473,9 +473,9 @@
PTR compat_sys_clock_nanosleep /* 4265 */
PTR sys_tgkill
PTR compat_sys_utimes
- PTR sys_ni_syscall /* sys_mbind */
- PTR sys_ni_syscall /* sys_get_mempolicy */
- PTR sys_ni_syscall /* 4270 sys_set_mempolicy */
+ PTR compat_sys_mbind
+ PTR compat_sys_get_mempolicy
+ PTR compat_sys_set_mempolicy /* 4270 */
PTR compat_sys_mq_open
PTR sys_mq_unlink
PTR compat_sys_mq_timedsend
@@ -492,7 +492,7 @@
PTR sys_inotify_init
PTR sys_inotify_add_watch /* 4285 */
PTR sys_inotify_rm_watch
- PTR sys_migrate_pages
+ PTR compat_sys_migrate_pages
PTR compat_sys_openat
PTR sys_mkdirat
PTR sys_mknodat /* 4290 */
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index a842154..7c1fe2b 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -282,7 +282,7 @@
* Initialize the bootmem allocator. It also setup initrd related data
* if needed.
*/
-#ifdef CONFIG_SGI_IP27
+#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA))
static void __init bootmem_init(void)
{
@@ -729,6 +729,25 @@
}
}
+#ifdef CONFIG_SMP
+static void __init prefill_possible_map(void)
+{
+ int i, possible = num_possible_cpus();
+
+ if (possible > nr_cpu_ids)
+ possible = nr_cpu_ids;
+
+ for (i = 0; i < possible; i++)
+ set_cpu_possible(i, true);
+ for (; i < NR_CPUS; i++)
+ set_cpu_possible(i, false);
+
+ nr_cpu_ids = possible;
+}
+#else
+static inline void prefill_possible_map(void) {}
+#endif
+
void __init setup_arch(char **cmdline_p)
{
cpu_probe();
@@ -752,6 +771,7 @@
resource_init();
plat_smp_setup();
+ prefill_possible_map();
cpu_cache_init();
}
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 949f2c6..e6e16a1 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -14,13 +14,14 @@
#include <linux/smp.h>
#include <linux/types.h>
-#include <asm/cacheflush.h>
+#include <asm/bcache.h>
#include <asm/gic.h>
#include <asm/mips-cm.h>
#include <asm/mips-cpc.h>
#include <asm/mips_mt.h>
#include <asm/mipsregs.h>
#include <asm/pm-cps.h>
+#include <asm/r4kcache.h>
#include <asm/smp-cps.h>
#include <asm/time.h>
#include <asm/uasm.h>
@@ -132,8 +133,11 @@
entry_code = (u32 *)&mips_cps_core_entry;
UASM_i_LA(&entry_code, 3, (long)mips_cm_base);
uasm_i_addiu(&entry_code, 16, 0, cca);
- dma_cache_wback_inv((unsigned long)&mips_cps_core_entry,
- (void *)entry_code - (void *)&mips_cps_core_entry);
+ blast_dcache_range((unsigned long)&mips_cps_core_entry,
+ (unsigned long)entry_code);
+ bc_wback_inv((unsigned long)&mips_cps_core_entry,
+ (void *)entry_code - (void *)&mips_cps_core_entry);
+ __sync();
/* Allocate core boot configuration structs */
mips_cps_core_bootcfg = kcalloc(ncores, sizeof(*mips_cps_core_bootcfg),
@@ -360,7 +364,7 @@
static void wait_for_sibling_halt(void *ptr_cpu)
{
unsigned cpu = (unsigned)ptr_cpu;
- unsigned vpe_id = cpu_data[cpu].vpe_id;
+ unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]);
unsigned halted;
unsigned long flags;
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 9bad52e..c94c4e9 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -59,9 +59,16 @@
cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(cpu_sibling_map);
+/* representing the core map of multi-core chips of each logical CPU */
+cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(cpu_core_map);
+
/* representing cpus for which sibling maps can be computed */
static cpumask_t cpu_sibling_setup_map;
+/* representing cpus for which core maps can be computed */
+static cpumask_t cpu_core_setup_map;
+
cpumask_t cpu_coherent_mask;
static inline void set_cpu_sibling_map(int cpu)
@@ -72,7 +79,8 @@
if (smp_num_siblings > 1) {
for_each_cpu_mask(i, cpu_sibling_setup_map) {
- if (cpu_data[cpu].core == cpu_data[i].core) {
+ if (cpu_data[cpu].package == cpu_data[i].package &&
+ cpu_data[cpu].core == cpu_data[i].core) {
cpu_set(i, cpu_sibling_map[cpu]);
cpu_set(cpu, cpu_sibling_map[i]);
}
@@ -81,6 +89,20 @@
cpu_set(cpu, cpu_sibling_map[cpu]);
}
+static inline void set_cpu_core_map(int cpu)
+{
+ int i;
+
+ cpu_set(cpu, cpu_core_setup_map);
+
+ for_each_cpu_mask(i, cpu_core_setup_map) {
+ if (cpu_data[cpu].package == cpu_data[i].package) {
+ cpu_set(i, cpu_core_map[cpu]);
+ cpu_set(cpu, cpu_core_map[i]);
+ }
+ }
+}
+
struct plat_smp_ops *mp_ops;
EXPORT_SYMBOL(mp_ops);
@@ -122,6 +144,7 @@
set_cpu_online(cpu, true);
set_cpu_sibling_map(cpu);
+ set_cpu_core_map(cpu);
cpu_set(cpu, cpu_callin_map);
@@ -175,6 +198,7 @@
current_thread_info()->cpu = 0;
mp_ops->prepare_cpus(max_cpus);
set_cpu_sibling_map(0);
+ set_cpu_core_map(0);
#ifndef CONFIG_HOTPLUG_CPU
init_cpu_present(cpu_possible_mask);
#endif
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 51706d6..22b19c2 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -90,6 +90,7 @@
extern asmlinkage void handle_dsp(void);
extern asmlinkage void handle_mcheck(void);
extern asmlinkage void handle_reserved(void);
+extern void tlb_do_page_fault_0(void);
void (*board_be_init)(void);
int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
@@ -1088,13 +1089,19 @@
static int enable_restore_fp_context(int msa)
{
- int err, was_fpu_owner;
+ int err, was_fpu_owner, prior_msa;
if (!used_math()) {
/* First time FP context user. */
+ preempt_disable();
err = init_fpu();
- if (msa && !err)
+ if (msa && !err) {
enable_msa();
+ _init_msa_upper();
+ set_thread_flag(TIF_USEDMSA);
+ set_thread_flag(TIF_MSA_CTX_LIVE);
+ }
+ preempt_enable();
if (!err)
set_used_math();
return err;
@@ -1134,10 +1141,11 @@
* This task is using or has previously used MSA. Thus we require
* that Status.FR == 1.
*/
+ preempt_disable();
was_fpu_owner = is_fpu_owner();
- err = own_fpu(0);
+ err = own_fpu_inatomic(0);
if (err)
- return err;
+ goto out;
enable_msa();
write_msa_csr(current->thread.fpu.msacsr);
@@ -1146,13 +1154,42 @@
/*
* If this is the first time that the task is using MSA and it has
* previously used scalar FP in this time slice then we already nave
- * FP context which we shouldn't clobber.
+ * FP context which we shouldn't clobber. We do however need to clear
+ * the upper 64b of each vector register so that this task has no
+ * opportunity to see data left behind by another.
*/
- if (!test_and_set_thread_flag(TIF_MSA_CTX_LIVE) && was_fpu_owner)
- return 0;
+ prior_msa = test_and_set_thread_flag(TIF_MSA_CTX_LIVE);
+ if (!prior_msa && was_fpu_owner) {
+ _init_msa_upper();
- /* We need to restore the vector context. */
- restore_msa(current);
+ goto out;
+ }
+
+ if (!prior_msa) {
+ /*
+ * Restore the least significant 64b of each vector register
+ * from the existing scalar FP context.
+ */
+ _restore_fp(current);
+
+ /*
+ * The task has not formerly used MSA, so clear the upper 64b
+ * of each vector register such that it cannot see data left
+ * behind by another task.
+ */
+ _init_msa_upper();
+ } else {
+ /* We need to restore the vector context. */
+ restore_msa(current);
+
+ /* Restore the scalar FP control & status register */
+ if (!was_fpu_owner)
+ asm volatile("ctc1 %0, $31" : : "r"(current->thread.fpu.fcr31));
+ }
+
+out:
+ preempt_enable();
+
return 0;
}
@@ -2114,6 +2151,12 @@
set_except_vector(15, handle_fpe);
set_except_vector(16, handle_ftlb);
+
+ if (cpu_has_rixiex) {
+ set_except_vector(19, tlb_do_page_fault_0);
+ set_except_vector(20, tlb_do_page_fault_0);
+ }
+
set_except_vector(21, handle_msa);
set_except_vector(22, handle_mdmx);
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index e6a86ccc..1b91fc6 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -60,8 +60,8 @@
These family machines include fuloong2f mini PC, yeeloong2f notebook,
LingLoong allinone PC and so forth.
-config LEMOTE_MACH3A
- bool "Lemote Loongson 3A family machines"
+config LOONGSON_MACH3X
+ bool "Generic Loongson 3 family machines"
select ARCH_SPARSEMEM_ENABLE
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select BOOT_ELF32
@@ -79,6 +79,7 @@
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
+ select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -86,8 +87,8 @@
select ZONE_DMA32
select LEFI_FIRMWARE_INTERFACE
help
- Lemote Loongson 3A family machines utilize the 3A revision of
- Loongson processor and RS780/SBX00 chipset.
+ Generic Loongson 3 family machines utilize the 3A/3B revision
+ of Loongson processor and RS780/SBX00 chipset.
endchoice
config CS5536
diff --git a/arch/mips/loongson/Platform b/arch/mips/loongson/Platform
index 6205372..0ac20eb 100644
--- a/arch/mips/loongson/Platform
+++ b/arch/mips/loongson/Platform
@@ -30,4 +30,4 @@
cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely
load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
-load-$(CONFIG_CPU_LOONGSON3) += 0xffffffff80200000
+load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index 0c543ea..f152285 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -27,6 +27,12 @@
struct efi_memory_map_loongson *loongson_memmap;
struct loongson_system_configuration loongson_sysconf;
+u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180};
+u64 loongson_freqctrl[MAX_PACKAGES];
+
+unsigned long long smp_group[4];
+int cpuhotplug_workaround = 0;
+
#define parse_even_earlier(res, option, p) \
do { \
unsigned int tmp __maybe_unused; \
@@ -77,9 +83,47 @@
cpu_clock_freq = ecpu->cpu_clock_freq;
loongson_sysconf.cputype = ecpu->cputype;
+ if (ecpu->cputype == Loongson_3A) {
+ loongson_sysconf.cores_per_node = 4;
+ loongson_sysconf.cores_per_package = 4;
+ smp_group[0] = 0x900000003ff01000;
+ smp_group[1] = 0x900010003ff01000;
+ smp_group[2] = 0x900020003ff01000;
+ smp_group[3] = 0x900030003ff01000;
+ loongson_chipcfg[0] = 0x900000001fe00180;
+ loongson_chipcfg[1] = 0x900010001fe00180;
+ loongson_chipcfg[2] = 0x900020001fe00180;
+ loongson_chipcfg[3] = 0x900030001fe00180;
+ loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
+ } else if (ecpu->cputype == Loongson_3B) {
+ loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */
+ loongson_sysconf.cores_per_package = 8;
+ smp_group[0] = 0x900000003ff01000;
+ smp_group[1] = 0x900010003ff05000;
+ smp_group[2] = 0x900020003ff09000;
+ smp_group[3] = 0x900030003ff0d000;
+ loongson_chipcfg[0] = 0x900000001fe00180;
+ loongson_chipcfg[1] = 0x900020001fe00180;
+ loongson_chipcfg[2] = 0x900040001fe00180;
+ loongson_chipcfg[3] = 0x900060001fe00180;
+ loongson_freqctrl[0] = 0x900000001fe001d0;
+ loongson_freqctrl[1] = 0x900020001fe001d0;
+ loongson_freqctrl[2] = 0x900040001fe001d0;
+ loongson_freqctrl[3] = 0x900060001fe001d0;
+ loongson_sysconf.ht_control_base = 0x90001EFDFB000000;
+ cpuhotplug_workaround = 1;
+ } else {
+ loongson_sysconf.cores_per_node = 1;
+ loongson_sysconf.cores_per_package = 1;
+ loongson_chipcfg[0] = 0x900000001fe00180;
+ }
+
loongson_sysconf.nr_cpus = ecpu->nr_cpus;
if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
loongson_sysconf.nr_cpus = NR_CPUS;
+ loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus +
+ loongson_sysconf.cores_per_node - 1) /
+ loongson_sysconf.cores_per_node;
loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
@@ -93,7 +137,6 @@
loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend;
- loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios;
pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n",
loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr,
@@ -111,6 +154,10 @@
case PRID_REV_LOONGSON3A:
cpu_clock_freq = 900000000;
break;
+ case PRID_REV_LOONGSON3B_R1:
+ case PRID_REV_LOONGSON3B_R2:
+ cpu_clock_freq = 1000000000;
+ break;
default:
cpu_clock_freq = 100000000;
break;
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index f37fe54..f6af3ab 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -30,7 +30,11 @@
set_io_port_base((unsigned long)
ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+#ifdef CONFIG_NUMA
+ prom_init_numa_memory();
+#else
prom_init_memory();
+#endif
/*init the uart base address */
prom_init_uart_base();
diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson/common/pm.c
index f55e07a..a6b67cc 100644
--- a/arch/mips/loongson/common/pm.c
+++ b/arch/mips/loongson/common/pm.c
@@ -79,7 +79,7 @@
static void wait_for_wakeup_events(void)
{
while (!wakeup_loongson())
- LOONGSON_CHIPCFG0 &= ~0x7;
+ LOONGSON_CHIPCFG(0) &= ~0x7;
}
/*
@@ -102,15 +102,15 @@
stop_perf_counters();
- cached_cpu_freq = LOONGSON_CHIPCFG0;
+ cached_cpu_freq = LOONGSON_CHIPCFG(0);
/* Put CPU into wait mode */
- LOONGSON_CHIPCFG0 &= ~0x7;
+ LOONGSON_CHIPCFG(0) &= ~0x7;
/* wait for the given events to wakeup cpu from wait mode */
wait_for_wakeup_events();
- LOONGSON_CHIPCFG0 = cached_cpu_freq;
+ LOONGSON_CHIPCFG(0) = cached_cpu_freq;
mmiowb();
}
diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c
index 1eed38e..a217061 100644
--- a/arch/mips/loongson/lemote-2f/clock.c
+++ b/arch/mips/loongson/lemote-2f/clock.c
@@ -114,9 +114,9 @@
clk->rate = rate;
- regval = LOONGSON_CHIPCFG0;
+ regval = LOONGSON_CHIPCFG(0);
regval = (regval & ~0x7) | (pos->driver_data - 1);
- LOONGSON_CHIPCFG0 = regval;
+ LOONGSON_CHIPCFG(0) = regval;
return ret;
}
diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c
index 90962a3..79ac694 100644
--- a/arch/mips/loongson/lemote-2f/reset.c
+++ b/arch/mips/loongson/lemote-2f/reset.c
@@ -28,7 +28,7 @@
* reset cpu to full speed, this is needed when enabling cpu frequency
* scalling
*/
- LOONGSON_CHIPCFG0 |= 0x7;
+ LOONGSON_CHIPCFG(0) |= 0x7;
}
/* reset support for fuloong2f */
diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile
index 70152b2..b4df775 100644
--- a/arch/mips/loongson/loongson-3/Makefile
+++ b/arch/mips/loongson/loongson-3/Makefile
@@ -1,6 +1,8 @@
#
# Makefile for Loongson-3 family machines
#
-obj-y += irq.o
+obj-y += irq.o cop2-ex.o
obj-$(CONFIG_SMP) += smp.o
+
+obj-$(CONFIG_NUMA) += numa.o
diff --git a/arch/mips/loongson/loongson-3/cop2-ex.c b/arch/mips/loongson/loongson-3/cop2-ex.c
new file mode 100644
index 0000000..9182e8d
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/cop2-ex.c
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014 Lemote Corporation.
+ * written by Huacai Chen <chenhc@lemote.com>
+ *
+ * based on arch/mips/cavium-octeon/cpu.c
+ * Copyright (C) 2009 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/notifier.h>
+
+#include <asm/fpu.h>
+#include <asm/cop2.h>
+#include <asm/current.h>
+#include <asm/mipsregs.h>
+
+static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
+ void *data)
+{
+ int fpu_enabled;
+ int fr = !test_thread_flag(TIF_32BIT_FPREGS);
+
+ switch (action) {
+ case CU2_EXCEPTION:
+ preempt_disable();
+ fpu_enabled = read_c0_status() & ST0_CU1;
+ if (!fr)
+ set_c0_status(ST0_CU1 | ST0_CU2);
+ else
+ set_c0_status(ST0_CU1 | ST0_CU2 | ST0_FR);
+ enable_fpu_hazard();
+ KSTK_STATUS(current) |= (ST0_CU1 | ST0_CU2);
+ if (fr)
+ KSTK_STATUS(current) |= ST0_FR;
+ else
+ KSTK_STATUS(current) &= ~ST0_FR;
+ /* If FPU is enabled, we needn't init or restore fp */
+ if(!fpu_enabled) {
+ set_thread_flag(TIF_USEDFPU);
+ if (!used_math()) {
+ _init_fpu();
+ set_used_math();
+ } else
+ _restore_fp(current);
+ }
+ preempt_enable();
+
+ return NOTIFY_STOP; /* Don't call default notifier */
+ }
+
+ return NOTIFY_OK; /* Let default notifier send signals */
+}
+
+static int __init loongson_cu2_setup(void)
+{
+ return cu2_notifier(loongson_cu2_call, 0);
+}
+early_initcall(loongson_cu2_setup);
diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c
index f240828..ca1c62a 100644
--- a/arch/mips/loongson/loongson-3/irq.c
+++ b/arch/mips/loongson/loongson-3/irq.c
@@ -7,6 +7,8 @@
#include <asm/i8259.h>
#include <asm/mipsregs.h>
+#include "smp.h"
+
unsigned int ht_irq[] = {1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
static void ht_irqdispatch(void)
@@ -53,9 +55,15 @@
/* Workaround: UART IRQ may deliver to any core */
if (d->irq == LOONGSON_UART_IRQ) {
int cpu = smp_processor_id();
+ int node_id = cpu / loongson_sysconf.cores_per_node;
+ int core_id = cpu % loongson_sysconf.cores_per_node;
+ u64 intenclr_addr = smp_group[node_id] |
+ (u64)(&LOONGSON_INT_ROUTER_INTENCLR);
+ u64 introuter_lpc_addr = smp_group[node_id] |
+ (u64)(&LOONGSON_INT_ROUTER_LPC);
- LOONGSON_INT_ROUTER_INTENCLR = 1 << 10;
- LOONGSON_INT_ROUTER_LPC = 0x10 + (1<<cpu);
+ *(volatile u32 *)intenclr_addr = 1 << 10;
+ *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
}
}
@@ -64,9 +72,15 @@
/* Workaround: UART IRQ may deliver to any core */
if (d->irq == LOONGSON_UART_IRQ) {
int cpu = smp_processor_id();
+ int node_id = cpu / loongson_sysconf.cores_per_node;
+ int core_id = cpu % loongson_sysconf.cores_per_node;
+ u64 intenset_addr = smp_group[node_id] |
+ (u64)(&LOONGSON_INT_ROUTER_INTENSET);
+ u64 introuter_lpc_addr = smp_group[node_id] |
+ (u64)(&LOONGSON_INT_ROUTER_LPC);
- LOONGSON_INT_ROUTER_INTENSET = 1 << 10;
- LOONGSON_INT_ROUTER_LPC = 0x10 + (1<<cpu);
+ *(volatile u32 *)intenset_addr = 1 << 10;
+ *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
}
set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson/loongson-3/numa.c
new file mode 100644
index 0000000..ca025a6
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/numa.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
+ * Insititute of Computing Technology
+ * Author: Xiang Gao, gaoxiang@ict.ac.cn
+ * Huacai Chen, chenhc@lemote.com
+ * Xiaofu Meng, Shuangshuang Zhang
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/nodemask.h>
+#include <linux/swap.h>
+#include <linux/memblock.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/highmem.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/bootinfo.h>
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+#include <asm/wbflush.h>
+#include <boot_param.h>
+
+static struct node_data prealloc__node_data[MAX_NUMNODES];
+unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+struct node_data *__node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(__node_data);
+
+static void enable_lpa(void)
+{
+ unsigned long value;
+
+ value = __read_32bit_c0_register($16, 3);
+ value |= 0x00000080;
+ __write_32bit_c0_register($16, 3, value);
+ value = __read_32bit_c0_register($16, 3);
+ pr_info("CP0_Config3: CP0 16.3 (0x%lx)\n", value);
+
+ value = __read_32bit_c0_register($5, 1);
+ value |= 0x20000000;
+ __write_32bit_c0_register($5, 1, value);
+ value = __read_32bit_c0_register($5, 1);
+ pr_info("CP0_PageGrain: CP0 5.1 (0x%lx)\n", value);
+}
+
+static void cpu_node_probe(void)
+{
+ int i;
+
+ nodes_clear(node_possible_map);
+ nodes_clear(node_online_map);
+ for (i = 0; i < loongson_sysconf.nr_nodes; i++) {
+ node_set_state(num_online_nodes(), N_POSSIBLE);
+ node_set_online(num_online_nodes());
+ }
+
+ pr_info("NUMA: Discovered %d cpus on %d nodes\n",
+ loongson_sysconf.nr_cpus, num_online_nodes());
+}
+
+static int __init compute_node_distance(int row, int col)
+{
+ int package_row = row * loongson_sysconf.cores_per_node /
+ loongson_sysconf.cores_per_package;
+ int package_col = col * loongson_sysconf.cores_per_node /
+ loongson_sysconf.cores_per_package;
+
+ if (col == row)
+ return 0;
+ else if (package_row == package_col)
+ return 40;
+ else
+ return 100;
+}
+
+static void __init init_topology_matrix(void)
+{
+ int row, col;
+
+ for (row = 0; row < MAX_NUMNODES; row++)
+ for (col = 0; col < MAX_NUMNODES; col++)
+ __node_distances[row][col] = -1;
+
+ for_each_online_node(row) {
+ for_each_online_node(col) {
+ __node_distances[row][col] =
+ compute_node_distance(row, col);
+ }
+ }
+}
+
+static unsigned long nid_to_addroffset(unsigned int nid)
+{
+ unsigned long result;
+ switch (nid) {
+ case 0:
+ default:
+ result = NODE0_ADDRSPACE_OFFSET;
+ break;
+ case 1:
+ result = NODE1_ADDRSPACE_OFFSET;
+ break;
+ case 2:
+ result = NODE2_ADDRSPACE_OFFSET;
+ break;
+ case 3:
+ result = NODE3_ADDRSPACE_OFFSET;
+ break;
+ }
+ return result;
+}
+
+static void __init szmem(unsigned int node)
+{
+ u32 i, mem_type;
+ static unsigned long num_physpages = 0;
+ u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
+
+ /* Parse memory information and activate */
+ for (i = 0; i < loongson_memmap->nr_map; i++) {
+ node_id = loongson_memmap->map[i].node_id;
+ if (node_id != node)
+ continue;
+
+ mem_type = loongson_memmap->map[i].mem_type;
+ mem_size = loongson_memmap->map[i].mem_size;
+ mem_start = loongson_memmap->map[i].mem_start;
+
+ switch (mem_type) {
+ case SYSTEM_RAM_LOW:
+ start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+ node_psize = (mem_size << 20) >> PAGE_SHIFT;
+ end_pfn = start_pfn + node_psize;
+ num_physpages += node_psize;
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+ start_pfn, end_pfn, num_physpages);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RAM);
+ memblock_add_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), node);
+ break;
+ case SYSTEM_RAM_HIGH:
+ start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+ node_psize = (mem_size << 20) >> PAGE_SHIFT;
+ end_pfn = start_pfn + node_psize;
+ num_physpages += node_psize;
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+ start_pfn, end_pfn, num_physpages);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RAM);
+ memblock_add_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), node);
+ break;
+ case MEM_RESERVED:
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RESERVED);
+ memblock_reserve(((node_id << 44) + mem_start),
+ mem_size << 20);
+ break;
+ }
+ }
+}
+
+static void __init node_mem_init(unsigned int node)
+{
+ unsigned long bootmap_size;
+ unsigned long node_addrspace_offset;
+ unsigned long start_pfn, end_pfn, freepfn;
+
+ node_addrspace_offset = nid_to_addroffset(node);
+ pr_info("Node%d's addrspace_offset is 0x%lx\n",
+ node, node_addrspace_offset);
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
+ freepfn = start_pfn;
+ if (node == 0)
+ freepfn = PFN_UP(__pa_symbol(&_end)); /* kernel end address */
+ pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx, freepfn=0x%lx\n",
+ node, start_pfn, end_pfn, freepfn);
+
+ __node_data[node] = prealloc__node_data + node;
+
+ NODE_DATA(node)->bdata = &bootmem_node_data[node];
+ NODE_DATA(node)->node_start_pfn = start_pfn;
+ NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
+
+ bootmap_size = init_bootmem_node(NODE_DATA(node), freepfn,
+ start_pfn, end_pfn);
+ free_bootmem_with_active_regions(node, end_pfn);
+ if (node == 0) /* used by finalize_initrd() */
+ max_low_pfn = end_pfn;
+
+ /* This is reserved for the kernel and bdata->node_bootmem_map */
+ reserve_bootmem_node(NODE_DATA(node), start_pfn << PAGE_SHIFT,
+ ((freepfn - start_pfn) << PAGE_SHIFT) + bootmap_size,
+ BOOTMEM_DEFAULT);
+
+ if (node == 0 && node_end_pfn(0) >= (0xffffffff >> PAGE_SHIFT)) {
+ /* Reserve 0xff800000~0xffffffff for RS780E integrated GPU */
+ reserve_bootmem_node(NODE_DATA(node),
+ (node_addrspace_offset | 0xff800000),
+ 8 << 20, BOOTMEM_DEFAULT);
+ }
+
+ sparse_memory_present_with_active_regions(node);
+}
+
+static __init void prom_meminit(void)
+{
+ unsigned int node, cpu;
+
+ cpu_node_probe();
+ init_topology_matrix();
+
+ for (node = 0; node < loongson_sysconf.nr_nodes; node++) {
+ if (node_online(node)) {
+ szmem(node);
+ node_mem_init(node);
+ cpus_clear(__node_data[(node)]->cpumask);
+ }
+ }
+ for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {
+ node = cpu / loongson_sysconf.cores_per_node;
+ if (node >= num_online_nodes())
+ node = 0;
+ pr_info("NUMA: set cpumask cpu %d on node %d\n", cpu, node);
+ cpu_set(cpu, __node_data[(node)]->cpumask);
+ }
+}
+
+void __init paging_init(void)
+{
+ unsigned node;
+ unsigned long zones_size[MAX_NR_ZONES] = {0, };
+
+ pagetable_init();
+
+ for_each_online_node(node) {
+ unsigned long start_pfn, end_pfn;
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
+
+ if (end_pfn > max_low_pfn)
+ max_low_pfn = end_pfn;
+ }
+#ifdef CONFIG_ZONE_DMA32
+ zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
+#endif
+ zones_size[ZONE_NORMAL] = max_low_pfn;
+ free_area_init_nodes(zones_size);
+}
+
+void __init mem_init(void)
+{
+ high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
+ free_all_bootmem();
+ setup_zero_pages(); /* This comes from node 0 */
+ mem_init_print_info(NULL);
+}
+
+/* All PCI device belongs to logical Node-0 */
+int pcibus_to_node(struct pci_bus *bus)
+{
+ return 0;
+}
+EXPORT_SYMBOL(pcibus_to_node);
+
+void __init prom_init_numa_memory(void)
+{
+ enable_lpa();
+ prom_meminit();
+}
+EXPORT_SYMBOL(prom_init_numa_memory);
diff --git a/arch/mips/loongson/loongson-3/smp.c b/arch/mips/loongson/loongson-3/smp.c
index 1e88940..74e827b 100644
--- a/arch/mips/loongson/loongson-3/smp.c
+++ b/arch/mips/loongson/loongson-3/smp.c
@@ -31,6 +31,12 @@
DEFINE_PER_CPU(int, cpu_state);
DEFINE_PER_CPU(uint32_t, core0_c0count);
+static void *ipi_set0_regs[16];
+static void *ipi_clear0_regs[16];
+static void *ipi_status0_regs[16];
+static void *ipi_en0_regs[16];
+static void *ipi_mailbox_buf[16];
+
/* read a 32bit value from ipi register */
#define loongson3_ipi_read32(addr) readl(addr)
/* read a 64bit value from ipi register */
@@ -48,100 +54,185 @@
__wbflush(); \
} while (0)
-static void *ipi_set0_regs[] = {
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0),
-};
+static void ipi_set0_regs_init(void)
+{
+ ipi_set0_regs[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0);
+ ipi_set0_regs[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0);
+ ipi_set0_regs[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0);
+ ipi_set0_regs[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0);
+ ipi_set0_regs[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0);
+ ipi_set0_regs[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0);
+ ipi_set0_regs[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0);
+ ipi_set0_regs[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0);
+ ipi_set0_regs[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0);
+ ipi_set0_regs[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0);
+ ipi_set0_regs[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0);
+ ipi_set0_regs[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0);
+ ipi_set0_regs[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0);
+ ipi_set0_regs[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0);
+ ipi_set0_regs[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0);
+ ipi_set0_regs[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0);
+}
-static void *ipi_clear0_regs[] = {
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0),
-};
+static void ipi_clear0_regs_init(void)
+{
+ ipi_clear0_regs[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0);
+ ipi_clear0_regs[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0);
+ ipi_clear0_regs[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0);
+ ipi_clear0_regs[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0);
+ ipi_clear0_regs[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0);
+ ipi_clear0_regs[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0);
+ ipi_clear0_regs[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0);
+ ipi_clear0_regs[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0);
+ ipi_clear0_regs[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0);
+ ipi_clear0_regs[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0);
+ ipi_clear0_regs[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0);
+ ipi_clear0_regs[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0);
+ ipi_clear0_regs[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0);
+ ipi_clear0_regs[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0);
+ ipi_clear0_regs[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0);
+ ipi_clear0_regs[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0);
+}
-static void *ipi_status0_regs[] = {
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0),
-};
+static void ipi_status0_regs_init(void)
+{
+ ipi_status0_regs[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0);
+ ipi_status0_regs[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0);
+ ipi_status0_regs[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0);
+ ipi_status0_regs[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0);
+ ipi_status0_regs[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0);
+ ipi_status0_regs[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0);
+ ipi_status0_regs[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0);
+ ipi_status0_regs[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0);
+ ipi_status0_regs[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0);
+ ipi_status0_regs[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0);
+ ipi_status0_regs[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0);
+ ipi_status0_regs[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0);
+ ipi_status0_regs[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0);
+ ipi_status0_regs[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0);
+ ipi_status0_regs[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0);
+ ipi_status0_regs[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0);
+}
-static void *ipi_en0_regs[] = {
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0),
-};
+static void ipi_en0_regs_init(void)
+{
+ ipi_en0_regs[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0);
+ ipi_en0_regs[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0);
+ ipi_en0_regs[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0);
+ ipi_en0_regs[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0);
+ ipi_en0_regs[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0);
+ ipi_en0_regs[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0);
+ ipi_en0_regs[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0);
+ ipi_en0_regs[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0);
+ ipi_en0_regs[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0);
+ ipi_en0_regs[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0);
+ ipi_en0_regs[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0);
+ ipi_en0_regs[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0);
+ ipi_en0_regs[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0);
+ ipi_en0_regs[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0);
+ ipi_en0_regs[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0);
+ ipi_en0_regs[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0);
+}
-static void *ipi_mailbox_buf[] = {
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF),
- (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF),
-};
+static void ipi_mailbox_buf_init(void)
+{
+ ipi_mailbox_buf[0] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF);
+ ipi_mailbox_buf[1] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF);
+ ipi_mailbox_buf[2] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF);
+ ipi_mailbox_buf[3] = (void *)
+ (SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF);
+ ipi_mailbox_buf[4] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF);
+ ipi_mailbox_buf[5] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF);
+ ipi_mailbox_buf[6] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF);
+ ipi_mailbox_buf[7] = (void *)
+ (SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF);
+ ipi_mailbox_buf[8] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF);
+ ipi_mailbox_buf[9] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF);
+ ipi_mailbox_buf[10] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF);
+ ipi_mailbox_buf[11] = (void *)
+ (SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF);
+ ipi_mailbox_buf[12] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF);
+ ipi_mailbox_buf[13] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF);
+ ipi_mailbox_buf[14] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF);
+ ipi_mailbox_buf[15] = (void *)
+ (SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF);
+}
/*
* Simple enough, just poke the appropriate ipi register
@@ -203,6 +294,8 @@
for (i = 0; i < loongson_sysconf.nr_cpus; i++)
loongson3_ipi_write32(0xffffffff, ipi_en0_regs[i]);
+ cpu_data[cpu].package = cpu / loongson_sysconf.cores_per_package;
+ cpu_data[cpu].core = cpu % loongson_sysconf.cores_per_package;
per_cpu(cpu_state, cpu) = CPU_ONLINE;
i = 0;
@@ -246,6 +339,11 @@
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
+ ipi_set0_regs_init();
+ ipi_clear0_regs_init();
+ ipi_status0_regs_init();
+ ipi_en0_regs_init();
+ ipi_mailbox_buf_init();
pr_info("Detected %i available secondary CPU(s)\n", num);
}
@@ -313,7 +411,7 @@
* flush all L1 entries at first. Then, another core (usually Core 0) can
* safely disable the clock of the target core. loongson3_play_dead() is
* called via CKSEG1 (uncached and unmmaped) */
-static void loongson3_play_dead(int *state_addr)
+static void loongson3a_play_dead(int *state_addr)
{
register int val;
register long cpuid, core, node, count;
@@ -375,6 +473,70 @@
: "a1");
}
+static void loongson3b_play_dead(int *state_addr)
+{
+ register int val;
+ register long cpuid, core, node, count;
+ register void *addr, *base, *initfunc;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " li %[addr], 0x80000000 \n" /* KSEG0 */
+ "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */
+ " cache 0, 1(%[addr]) \n"
+ " cache 0, 2(%[addr]) \n"
+ " cache 0, 3(%[addr]) \n"
+ " cache 1, 0(%[addr]) \n" /* flush L1 DCache */
+ " cache 1, 1(%[addr]) \n"
+ " cache 1, 2(%[addr]) \n"
+ " cache 1, 3(%[addr]) \n"
+ " addiu %[sets], %[sets], -1 \n"
+ " bnez %[sets], 1b \n"
+ " addiu %[addr], %[addr], 0x20 \n"
+ " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
+ " sw %[val], (%[state_addr]) \n"
+ " sync \n"
+ " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */
+ " .set pop \n"
+ : [addr] "=&r" (addr), [val] "=&r" (val)
+ : [state_addr] "r" (state_addr),
+ [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips64 \n"
+ " mfc0 %[cpuid], $15, 1 \n"
+ " andi %[cpuid], 0x3ff \n"
+ " dli %[base], 0x900000003ff01000 \n"
+ " andi %[core], %[cpuid], 0x3 \n"
+ " sll %[core], 8 \n" /* get core id */
+ " or %[base], %[base], %[core] \n"
+ " andi %[node], %[cpuid], 0xc \n"
+ " dsll %[node], 42 \n" /* get node id */
+ " or %[base], %[base], %[node] \n"
+ " dsrl %[node], 30 \n" /* 15:14 */
+ " or %[base], %[base], %[node] \n"
+ "1: li %[count], 0x100 \n" /* wait for init loop */
+ "2: bnez %[count], 2b \n" /* limit mailbox access */
+ " addiu %[count], -1 \n"
+ " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */
+ " beqz %[initfunc], 1b \n"
+ " nop \n"
+ " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */
+ " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */
+ " ld $a1, 0x38(%[base]) \n"
+ " jr %[initfunc] \n" /* jump to initial PC */
+ " nop \n"
+ " .set pop \n"
+ : [core] "=&r" (core), [node] "=&r" (node),
+ [base] "=&r" (base), [cpuid] "=&r" (cpuid),
+ [count] "=&r" (count), [initfunc] "=&r" (initfunc)
+ : /* No Input */
+ : "a1");
+}
+
void play_dead(void)
{
int *state_addr;
@@ -382,13 +544,48 @@
void (*play_dead_at_ckseg1)(int *);
idle_task_exit();
- play_dead_at_ckseg1 =
- (void *)CKSEG1ADDR((unsigned long)loongson3_play_dead);
+ switch (loongson_sysconf.cputype) {
+ case Loongson_3A:
+ default:
+ play_dead_at_ckseg1 =
+ (void *)CKSEG1ADDR((unsigned long)loongson3a_play_dead);
+ break;
+ case Loongson_3B:
+ play_dead_at_ckseg1 =
+ (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead);
+ break;
+ }
state_addr = &per_cpu(cpu_state, cpu);
mb();
play_dead_at_ckseg1(state_addr);
}
+void loongson3_disable_clock(int cpu)
+{
+ uint64_t core_id = cpu_data[cpu].core;
+ uint64_t package_id = cpu_data[cpu].package;
+
+ if (loongson_sysconf.cputype == Loongson_3A) {
+ LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id));
+ } else if (loongson_sysconf.cputype == Loongson_3B) {
+ if (!cpuhotplug_workaround)
+ LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3));
+ }
+}
+
+void loongson3_enable_clock(int cpu)
+{
+ uint64_t core_id = cpu_data[cpu].core;
+ uint64_t package_id = cpu_data[cpu].package;
+
+ if (loongson_sysconf.cputype == Loongson_3A) {
+ LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id);
+ } else if (loongson_sysconf.cputype == Loongson_3B) {
+ if (!cpuhotplug_workaround)
+ LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3);
+ }
+}
+
#define CPU_POST_DEAD_FROZEN (CPU_POST_DEAD | CPU_TASKS_FROZEN)
static int loongson3_cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
@@ -399,12 +596,12 @@
case CPU_POST_DEAD:
case CPU_POST_DEAD_FROZEN:
pr_info("Disable clock for CPU#%d\n", cpu);
- LOONGSON_CHIPCFG0 &= ~(1 << (12 + cpu));
+ loongson3_disable_clock(cpu);
break;
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
pr_info("Enable clock for CPU#%d\n", cpu);
- LOONGSON_CHIPCFG0 |= 1 << (12 + cpu);
+ loongson3_enable_clock(cpu);
break;
}
diff --git a/arch/mips/loongson/loongson-3/smp.h b/arch/mips/loongson/loongson-3/smp.h
index 3453e8c..d98ff65 100644
--- a/arch/mips/loongson/loongson-3/smp.h
+++ b/arch/mips/loongson/loongson-3/smp.h
@@ -1,29 +1,30 @@
#ifndef __LOONGSON_SMP_H_
#define __LOONGSON_SMP_H_
-/* for Loongson-3A smp support */
+/* for Loongson-3 smp support */
+extern unsigned long long smp_group[4];
/* 4 groups(nodes) in maximum in numa case */
-#define SMP_CORE_GROUP0_BASE 0x900000003ff01000
-#define SMP_CORE_GROUP1_BASE 0x900010003ff01000
-#define SMP_CORE_GROUP2_BASE 0x900020003ff01000
-#define SMP_CORE_GROUP3_BASE 0x900030003ff01000
+#define SMP_CORE_GROUP0_BASE (smp_group[0])
+#define SMP_CORE_GROUP1_BASE (smp_group[1])
+#define SMP_CORE_GROUP2_BASE (smp_group[2])
+#define SMP_CORE_GROUP3_BASE (smp_group[3])
/* 4 cores in each group(node) */
-#define SMP_CORE0_OFFSET 0x000
-#define SMP_CORE1_OFFSET 0x100
-#define SMP_CORE2_OFFSET 0x200
-#define SMP_CORE3_OFFSET 0x300
+#define SMP_CORE0_OFFSET 0x000
+#define SMP_CORE1_OFFSET 0x100
+#define SMP_CORE2_OFFSET 0x200
+#define SMP_CORE3_OFFSET 0x300
/* ipi registers offsets */
-#define STATUS0 0x00
-#define EN0 0x04
-#define SET0 0x08
-#define CLEAR0 0x0c
-#define STATUS1 0x10
-#define MASK1 0x14
-#define SET1 0x18
-#define CLEAR1 0x1c
-#define BUF 0x20
+#define STATUS0 0x00
+#define EN0 0x04
+#define SET0 0x08
+#define CLEAR0 0x0c
+#define STATUS1 0x10
+#define MASK1 0x14
+#define SET1 0x18
+#define CLEAR1 0x1c
+#define BUF 0x20
#endif
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index f2e8302..fbcd867 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1230,19 +1230,19 @@
case CPU_R14000:
break;
+ case CPU_74K:
+ case CPU_1074K:
+ alias_74k_erratum(c);
+ /* Fall through. */
case CPU_M14KC:
case CPU_M14KEC:
case CPU_24K:
case CPU_34K:
- case CPU_74K:
case CPU_1004K:
- case CPU_1074K:
case CPU_INTERAPTIV:
case CPU_P5600:
case CPU_PROAPTIV:
case CPU_M5150:
- if ((c->cputype == CPU_74K) || (c->cputype == CPU_1074K))
- alias_74k_erratum(c);
if (!(read_c0_config7() & MIPS_CONF7_IAR) &&
(c->icache.waysize > PAGE_SIZE))
c->icache.flags |= MIPS_CACHE_ALIASES;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 6e44133..571aab0 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -325,6 +325,38 @@
#endif
}
+unsigned __weak platform_maar_init(unsigned num_maars)
+{
+ return 0;
+}
+
+static void maar_init(void)
+{
+ unsigned num_maars, used, i;
+
+ if (!cpu_has_maar)
+ return;
+
+ /* Detect the number of MAARs */
+ write_c0_maari(~0);
+ back_to_back_c0_hazard();
+ num_maars = read_c0_maari() + 1;
+
+ /* MAARs should be in pairs */
+ WARN_ON(num_maars % 2);
+
+ /* Configure the required MAARs */
+ used = platform_maar_init(num_maars / 2);
+
+ /* Disable any further MAARs */
+ for (i = (used * 2); i < num_maars; i++) {
+ write_c0_maari(i);
+ back_to_back_c0_hazard();
+ write_c0_maar(0);
+ back_to_back_c0_hazard();
+ }
+}
+
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
@@ -337,6 +369,7 @@
#endif
high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
+ maar_init();
free_all_bootmem();
setup_zero_pages(); /* Setup zeroed pages. */
mem_init_free_highmem();
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index d657493..4094bbd 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -158,7 +158,7 @@
{
int cpu = smp_processor_id();
- if (!vma || cpu_context(cpu, vma->vm_mm) != 0) {
+ if (cpu_context(cpu, vma->vm_mm) != 0) {
unsigned long flags;
int oldpid, newpid, idx;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 3914e27..fa6ebd4 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -57,6 +57,7 @@
local_irq_save(flags);
/* Save old context and create impossible VPN2 value */
old_ctx = read_c0_entryhi();
+ htw_stop();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
@@ -90,6 +91,7 @@
}
tlbw_use_hazard();
write_c0_entryhi(old_ctx);
+ htw_start();
flush_itlb();
local_irq_restore(flags);
}
@@ -131,6 +133,7 @@
int oldpid = read_c0_entryhi();
int newpid = cpu_asid(cpu, mm);
+ htw_stop();
while (start < end) {
int idx;
@@ -151,6 +154,7 @@
}
tlbw_use_hazard();
write_c0_entryhi(oldpid);
+ htw_start();
} else {
drop_mmu_context(mm, cpu);
}
@@ -174,6 +178,7 @@
start &= (PAGE_MASK << 1);
end += ((PAGE_SIZE << 1) - 1);
end &= (PAGE_MASK << 1);
+ htw_stop();
while (start < end) {
int idx;
@@ -195,6 +200,7 @@
}
tlbw_use_hazard();
write_c0_entryhi(pid);
+ htw_start();
} else {
local_flush_tlb_all();
}
@@ -214,6 +220,7 @@
page &= (PAGE_MASK << 1);
local_irq_save(flags);
oldpid = read_c0_entryhi();
+ htw_stop();
write_c0_entryhi(page | newpid);
mtc0_tlbw_hazard();
tlb_probe();
@@ -231,6 +238,7 @@
finish:
write_c0_entryhi(oldpid);
+ htw_start();
flush_itlb_vm(vma);
local_irq_restore(flags);
}
@@ -247,6 +255,7 @@
local_irq_save(flags);
oldpid = read_c0_entryhi();
+ htw_stop();
page &= (PAGE_MASK << 1);
write_c0_entryhi(page);
mtc0_tlbw_hazard();
@@ -263,6 +272,7 @@
tlbw_use_hazard();
}
write_c0_entryhi(oldpid);
+ htw_start();
flush_itlb();
local_irq_restore(flags);
}
@@ -351,6 +361,7 @@
local_irq_save(flags);
/* Save old context and create impossible VPN2 value */
old_ctx = read_c0_entryhi();
+ htw_stop();
old_pagemask = read_c0_pagemask();
wired = read_c0_wired();
write_c0_wired(wired + 1);
@@ -366,6 +377,7 @@
write_c0_entryhi(old_ctx);
tlbw_use_hazard(); /* What is the hazard here? */
+ htw_start();
write_c0_pagemask(old_pagemask);
local_flush_tlb_all();
local_irq_restore(flags);
@@ -391,6 +403,51 @@
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+/*
+ * Used for loading TLB entries before trap_init() has started, when we
+ * don't actually want to add a wired entry which remains throughout the
+ * lifetime of the system
+ */
+
+int temp_tlb_entry __cpuinitdata;
+
+__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask)
+{
+ int ret = 0;
+ unsigned long flags;
+ unsigned long wired;
+ unsigned long old_pagemask;
+ unsigned long old_ctx;
+
+ local_irq_save(flags);
+ /* Save old context and create impossible VPN2 value */
+ old_ctx = read_c0_entryhi();
+ old_pagemask = read_c0_pagemask();
+ wired = read_c0_wired();
+ if (--temp_tlb_entry < wired) {
+ printk(KERN_WARNING
+ "No TLB space left for add_temporary_entry\n");
+ ret = -ENOSPC;
+ goto out;
+ }
+
+ write_c0_index(temp_tlb_entry);
+ write_c0_pagemask(pagemask);
+ write_c0_entryhi(entryhi);
+ write_c0_entrylo0(entrylo0);
+ write_c0_entrylo1(entrylo1);
+ mtc0_tlbw_hazard();
+ tlb_write_indexed();
+ tlbw_use_hazard();
+
+ write_c0_entryhi(old_ctx);
+ write_c0_pagemask(old_pagemask);
+out:
+ local_irq_restore(flags);
+ return ret;
+}
+
static int ntlb;
static int __init set_ntlb(char *str)
{
@@ -431,6 +488,8 @@
write_c0_pagegrain(pg);
}
+ temp_tlb_entry = current_cpu_data.tlbsize - 1;
+
/* From this point on the ARC firmware is dead. */
local_flush_tlb_all();
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index cf8a952..a08dd53 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1922,7 +1922,7 @@
if (m4kc_tlbp_war())
build_tlb_probe_entry(&p);
- if (cpu_has_rixi) {
+ if (cpu_has_rixi && !cpu_has_rixiex) {
/*
* If the page is not _PAGE_VALID, RI or XI could not
* have triggered it. Skip the expensive test..
@@ -1989,7 +1989,7 @@
build_pte_present(&p, &r, wr.r1, wr.r2, wr.r3, label_nopage_tlbl);
build_tlb_probe_entry(&p);
- if (cpu_has_rixi) {
+ if (cpu_has_rixi && !cpu_has_rixiex) {
/*
* If the page is not _PAGE_VALID, RI or XI could not
* have triggered it. Skip the expensive test..
@@ -2197,6 +2197,94 @@
(unsigned long)tlbmiss_handler_setup_pgd_end);
}
+static void print_htw_config(void)
+{
+ unsigned long config;
+ unsigned int pwctl;
+ const int field = 2 * sizeof(unsigned long);
+
+ config = read_c0_pwfield();
+ pr_debug("PWField (0x%0*lx): GDI: 0x%02lx UDI: 0x%02lx MDI: 0x%02lx PTI: 0x%02lx PTEI: 0x%02lx\n",
+ field, config,
+ (config & MIPS_PWFIELD_GDI_MASK) >> MIPS_PWFIELD_GDI_SHIFT,
+ (config & MIPS_PWFIELD_UDI_MASK) >> MIPS_PWFIELD_UDI_SHIFT,
+ (config & MIPS_PWFIELD_MDI_MASK) >> MIPS_PWFIELD_MDI_SHIFT,
+ (config & MIPS_PWFIELD_PTI_MASK) >> MIPS_PWFIELD_PTI_SHIFT,
+ (config & MIPS_PWFIELD_PTEI_MASK) >> MIPS_PWFIELD_PTEI_SHIFT);
+
+ config = read_c0_pwsize();
+ pr_debug("PWSize (0x%0*lx): GDW: 0x%02lx UDW: 0x%02lx MDW: 0x%02lx PTW: 0x%02lx PTEW: 0x%02lx\n",
+ field, config,
+ (config & MIPS_PWSIZE_GDW_MASK) >> MIPS_PWSIZE_GDW_SHIFT,
+ (config & MIPS_PWSIZE_UDW_MASK) >> MIPS_PWSIZE_UDW_SHIFT,
+ (config & MIPS_PWSIZE_MDW_MASK) >> MIPS_PWSIZE_MDW_SHIFT,
+ (config & MIPS_PWSIZE_PTW_MASK) >> MIPS_PWSIZE_PTW_SHIFT,
+ (config & MIPS_PWSIZE_PTEW_MASK) >> MIPS_PWSIZE_PTEW_SHIFT);
+
+ pwctl = read_c0_pwctl();
+ pr_debug("PWCtl (0x%x): PWEn: 0x%x DPH: 0x%x HugePg: 0x%x Psn: 0x%x\n",
+ pwctl,
+ (pwctl & MIPS_PWCTL_PWEN_MASK) >> MIPS_PWCTL_PWEN_SHIFT,
+ (pwctl & MIPS_PWCTL_DPH_MASK) >> MIPS_PWCTL_DPH_SHIFT,
+ (pwctl & MIPS_PWCTL_HUGEPG_MASK) >> MIPS_PWCTL_HUGEPG_SHIFT,
+ (pwctl & MIPS_PWCTL_PSN_MASK) >> MIPS_PWCTL_PSN_SHIFT);
+}
+
+static void config_htw_params(void)
+{
+ unsigned long pwfield, pwsize, ptei;
+ unsigned int config;
+
+ /*
+ * We are using 2-level page tables, so we only need to
+ * setup GDW and PTW appropriately. UDW and MDW will remain 0.
+ * The default value of GDI/UDI/MDI/PTI is 0xc. It is illegal to
+ * write values less than 0xc in these fields because the entire
+ * write will be dropped. As a result of which, we must preserve
+ * the original reset values and overwrite only what we really want.
+ */
+
+ pwfield = read_c0_pwfield();
+ /* re-initialize the GDI field */
+ pwfield &= ~MIPS_PWFIELD_GDI_MASK;
+ pwfield |= PGDIR_SHIFT << MIPS_PWFIELD_GDI_SHIFT;
+ /* re-initialize the PTI field including the even/odd bit */
+ pwfield &= ~MIPS_PWFIELD_PTI_MASK;
+ pwfield |= PAGE_SHIFT << MIPS_PWFIELD_PTI_SHIFT;
+ /* Set the PTEI right shift */
+ ptei = _PAGE_GLOBAL_SHIFT << MIPS_PWFIELD_PTEI_SHIFT;
+ pwfield |= ptei;
+ write_c0_pwfield(pwfield);
+ /* Check whether the PTEI value is supported */
+ back_to_back_c0_hazard();
+ pwfield = read_c0_pwfield();
+ if (((pwfield & MIPS_PWFIELD_PTEI_MASK) << MIPS_PWFIELD_PTEI_SHIFT)
+ != ptei) {
+ pr_warn("Unsupported PTEI field value: 0x%lx. HTW will not be enabled",
+ ptei);
+ /*
+ * Drop option to avoid HTW being enabled via another path
+ * (eg htw_reset())
+ */
+ current_cpu_data.options &= ~MIPS_CPU_HTW;
+ return;
+ }
+
+ pwsize = ilog2(PTRS_PER_PGD) << MIPS_PWSIZE_GDW_SHIFT;
+ pwsize |= ilog2(PTRS_PER_PTE) << MIPS_PWSIZE_PTW_SHIFT;
+ write_c0_pwsize(pwsize);
+
+ /* Make sure everything is set before we enable the HTW */
+ back_to_back_c0_hazard();
+
+ /* Enable HTW and disable the rest of the pwctl fields */
+ config = 1 << MIPS_PWCTL_PWEN_SHIFT;
+ write_c0_pwctl(config);
+ pr_info("Hardware Page Table Walker enabled\n");
+
+ print_htw_config();
+}
+
void build_tlb_refill_handler(void)
{
/*
@@ -2261,5 +2349,8 @@
}
if (cpu_has_local_ebase)
build_r4000_tlb_refill_handler();
+ if (cpu_has_htw)
+ config_htw_params();
+
}
}
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index ecc2785..e4f43ba 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -42,6 +42,10 @@
static DEFINE_RAW_SPINLOCK(mips_irq_lock);
+#ifdef CONFIG_MIPS_GIC_IPI
+DECLARE_BITMAP(ipi_ints, GIC_NUM_INTRS);
+#endif
+
static inline int mips_pcibios_iack(void)
{
int irq;
@@ -125,16 +129,22 @@
static void malta_ipi_irqdispatch(void)
{
- int irq;
+#ifdef CONFIG_MIPS_GIC_IPI
+ unsigned long irq;
+ DECLARE_BITMAP(pending, GIC_NUM_INTRS);
+ gic_get_int_mask(pending, ipi_ints);
+
+ irq = find_first_bit(pending, GIC_NUM_INTRS);
+
+ while (irq < GIC_NUM_INTRS) {
+ do_IRQ(MIPS_GIC_IRQ_BASE + irq);
+
+ irq = find_next_bit(pending, GIC_NUM_INTRS, irq + 1);
+ }
+#endif
if (gic_compare_int())
do_IRQ(MIPS_GIC_IRQ_BASE);
-
- irq = gic_get_int();
- if (irq < 0)
- return; /* interrupt has already been cleared */
-
- do_IRQ(MIPS_GIC_IRQ_BASE + irq);
}
static void corehi_irqdispatch(void)
@@ -427,8 +437,9 @@
gic_intr_map[intr].pin = cpupin;
gic_intr_map[intr].polarity = GIC_POL_POS;
gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
- gic_intr_map[intr].flags = GIC_FLAG_IPI;
+ gic_intr_map[intr].flags = 0;
ipi_map[cpu] |= (1 << (cpupin + 2));
+ bitmap_set(ipi_ints, intr, 1);
}
static void __init fill_ipi_map(void)
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index 6d97730..0c35dee0 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -16,6 +16,7 @@
#include <linux/string.h>
#include <asm/bootinfo.h>
+#include <asm/maar.h>
#include <asm/sections.h>
#include <asm/fw/fw.h>
@@ -164,3 +165,28 @@
addr, addr + boot_mem_map.map[i].size);
}
}
+
+unsigned platform_maar_init(unsigned num_pairs)
+{
+ phys_addr_t mem_end = (physical_memsize & ~0xffffull) - 1;
+ struct maar_config cfg[] = {
+ /* DRAM preceding I/O */
+ { 0x00000000, 0x0fffffff, MIPS_MAAR_S },
+
+ /* DRAM following I/O */
+ { 0x20000000, mem_end, MIPS_MAAR_S },
+
+ /* DRAM alias in upper half of physical */
+ { 0x80000000, 0x80000000 + mem_end, MIPS_MAAR_S },
+ };
+ unsigned i, num_cfg = ARRAY_SIZE(cfg);
+
+ /* If DRAM fits before I/O, drop the region following it */
+ if (physical_memsize <= 0x10000000) {
+ num_cfg--;
+ for (i = 1; i < num_cfg; i++)
+ cfg[i] = cfg[i + 1];
+ }
+
+ return maar_config(cfg, num_cfg, num_pairs);
+}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index ff8a553..6523d55 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
-obj-$(CONFIG_LEMOTE_MACH3A) += fixup-loongson3.o ops-loongson3.o
+obj-$(CONFIG_LOONGSON_MACH3X) += fixup-loongson3.o ops-loongson3.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index 0e046d8..d54ea93 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -199,8 +199,6 @@
char *tx4927_pcibios_setup(char *str)
{
- unsigned long val;
-
if (!strncmp(str, "trdyto=", 7)) {
u8 val = 0;
if (kstrtou8(str + 7, 0, &val) == 0)
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 563d1f6..c19600a 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -7,6 +7,7 @@
* Support for all devices (greater than 16) added by David Gathright.
*/
+#include <linux/clk.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/pci.h>
@@ -364,6 +365,7 @@
void __iomem *virt_io;
unsigned long val;
struct resource *r;
+ struct clk *c;
int ret;
/* need at least PCI IRQ mapping table */
@@ -393,11 +395,24 @@
goto out1;
}
+ c = clk_get(&pdev->dev, "pci_clko");
+ if (IS_ERR(c)) {
+ dev_err(&pdev->dev, "unable to find PCI clock\n");
+ ret = PTR_ERR(c);
+ goto out2;
+ }
+
+ ret = clk_prepare_enable(c);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot enable PCI clock\n");
+ goto out6;
+ }
+
ctx->regs = ioremap_nocache(r->start, resource_size(r));
if (!ctx->regs) {
dev_err(&pdev->dev, "cannot map pci regs\n");
ret = -ENODEV;
- goto out2;
+ goto out5;
}
/* map parts of the PCI IO area */
@@ -465,12 +480,19 @@
register_syscore_ops(&alchemy_pci_pmops);
register_pci_controller(&ctx->alchemy_pci_ctrl);
+ dev_info(&pdev->dev, "PCI controller at %ld MHz\n",
+ clk_get_rate(c) / 1000000);
+
return 0;
out4:
iounmap(virt_io);
out3:
iounmap(ctx->regs);
+out5:
+ clk_disable_unprepare(c);
+out6:
+ clk_put(c);
out2:
release_mem_region(r->start, resource_size(r));
out1:
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 2513952..7c4598c 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -81,7 +81,7 @@
panic("device tree not present");
strlcpy(of_ids[0].compatible, soc_info.compatible, len);
- strncpy(of_ids[1].compatible, "palmbus", len);
+ strlcpy(of_ids[1].compatible, "palmbus", len);
if (of_platform_populate(NULL, of_ids, NULL, NULL))
panic("failed to populate DT");
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index ba61268..e31e8cd 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -251,28 +251,6 @@
&rb532_wdt
};
-static void __init parse_mac_addr(char *macstr)
-{
- int i, h, l;
-
- for (i = 0; i < 6; i++) {
- if (i != 5 && *(macstr + 2) != ':')
- return;
-
- h = hex_to_bin(*macstr++);
- if (h == -1)
- return;
-
- l = hex_to_bin(*macstr++);
- if (l == -1)
- return;
-
- macstr++;
- korina_dev0_data.mac[i] = (h << 4) + l;
- }
-}
-
-
/* NAND definitions */
#define NAND_CHIP_DELAY 25
@@ -334,7 +312,10 @@
static int __init setup_kmac(char *s)
{
printk(KERN_INFO "korina mac = %s\n", s);
- parse_mac_addr(s);
+ if (!mac_pton(s, korina_dev0_data.mac)) {
+ printk(KERN_ERR "Invalid mac\n");
+ return -EINVAL;
+ }
return 0;
}
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 2871327..a77698f 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -268,7 +268,7 @@
return err;
}
-static void quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __init_refok quirk_slc90e66_bridge(struct pci_dev *dev)
{
int irq; /* PCI/ISA Bridge interrupt */
u8 reg_64;
@@ -331,7 +331,7 @@
* !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
*/
dat |= 0x01;
- pci_write_config_byte(dev, regs[i], dat);
+ pci_write_config_byte(dev, 0x5c, dat);
pci_read_config_byte(dev, 0x5c, &dat);
printk(KERN_CONT " REG5C %02x", dat);
printk(KERN_CONT "\n");
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index d4add86..9fa1772 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -148,9 +148,9 @@
u32 cpu_freq;
spin_lock_irqsave(&loongson2_wait_lock, flags);
- cpu_freq = LOONGSON_CHIPCFG0;
- LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */
- LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */
+ cpu_freq = LOONGSON_CHIPCFG(0);
+ LOONGSON_CHIPCFG(0) &= ~0x7; /* Put CPU into wait mode */
+ LOONGSON_CHIPCFG(0) = cpu_freq; /* Restore CPU state */
spin_unlock_irqrestore(&loongson2_wait_lock, flags);
local_irq_enable();
}
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index f5443a6..9c9f6af 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -32,6 +32,7 @@
* (the low to high transition will not occur).
*/
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -90,7 +91,7 @@
struct mmc_request *mrq;
u32 flags;
- u32 iobase;
+ void __iomem *iobase;
u32 clock;
u32 bus_width;
u32 power_mode;
@@ -118,6 +119,7 @@
struct au1xmmc_platform_data *platdata;
struct platform_device *pdev;
struct resource *ioarea;
+ struct clk *clk;
};
/* Status flags used by the host structure */
@@ -162,32 +164,33 @@
static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
{
- u32 val = au_readl(HOST_CONFIG(host));
+ u32 val = __raw_readl(HOST_CONFIG(host));
val |= mask;
- au_writel(val, HOST_CONFIG(host));
- au_sync();
+ __raw_writel(val, HOST_CONFIG(host));
+ wmb(); /* drain writebuffer */
}
static inline void FLUSH_FIFO(struct au1xmmc_host *host)
{
- u32 val = au_readl(HOST_CONFIG2(host));
+ u32 val = __raw_readl(HOST_CONFIG2(host));
- au_writel(val | SD_CONFIG2_FF, HOST_CONFIG2(host));
- au_sync_delay(1);
+ __raw_writel(val | SD_CONFIG2_FF, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
+ mdelay(1);
/* SEND_STOP will turn off clock control - this re-enables it */
val &= ~SD_CONFIG2_DF;
- au_writel(val, HOST_CONFIG2(host));
- au_sync();
+ __raw_writel(val, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
}
static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
{
- u32 val = au_readl(HOST_CONFIG(host));
+ u32 val = __raw_readl(HOST_CONFIG(host));
val &= ~mask;
- au_writel(val, HOST_CONFIG(host));
- au_sync();
+ __raw_writel(val, HOST_CONFIG(host));
+ wmb(); /* drain writebuffer */
}
static inline void SEND_STOP(struct au1xmmc_host *host)
@@ -197,12 +200,13 @@
WARN_ON(host->status != HOST_S_DATA);
host->status = HOST_S_STOP;
- config2 = au_readl(HOST_CONFIG2(host));
- au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host));
- au_sync();
+ config2 = __raw_readl(HOST_CONFIG2(host));
+ __raw_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
/* Send the stop command */
- au_writel(STOP_CMD, HOST_CMD(host));
+ __raw_writel(STOP_CMD, HOST_CMD(host));
+ wmb(); /* drain writebuffer */
}
static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
@@ -296,28 +300,28 @@
}
}
- au_writel(cmd->arg, HOST_CMDARG(host));
- au_sync();
+ __raw_writel(cmd->arg, HOST_CMDARG(host));
+ wmb(); /* drain writebuffer */
if (wait)
IRQ_OFF(host, SD_CONFIG_CR);
- au_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
- au_sync();
+ __raw_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
+ wmb(); /* drain writebuffer */
/* Wait for the command to go on the line */
- while (au_readl(HOST_CMD(host)) & SD_CMD_GO)
+ while (__raw_readl(HOST_CMD(host)) & SD_CMD_GO)
/* nop */;
/* Wait for the command to come back */
if (wait) {
- u32 status = au_readl(HOST_STATUS(host));
+ u32 status = __raw_readl(HOST_STATUS(host));
while (!(status & SD_STATUS_CR))
- status = au_readl(HOST_STATUS(host));
+ status = __raw_readl(HOST_STATUS(host));
/* Clear the CR status */
- au_writel(SD_STATUS_CR, HOST_STATUS(host));
+ __raw_writel(SD_STATUS_CR, HOST_STATUS(host));
IRQ_ON(host, SD_CONFIG_CR);
}
@@ -339,11 +343,11 @@
data = mrq->cmd->data;
if (status == 0)
- status = au_readl(HOST_STATUS(host));
+ status = __raw_readl(HOST_STATUS(host));
/* The transaction is really over when the SD_STATUS_DB bit is clear */
while ((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
- status = au_readl(HOST_STATUS(host));
+ status = __raw_readl(HOST_STATUS(host));
data->error = 0;
dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
@@ -357,7 +361,7 @@
data->error = -EILSEQ;
/* Clear the CRC bits */
- au_writel(SD_STATUS_WC | SD_STATUS_RC, HOST_STATUS(host));
+ __raw_writel(SD_STATUS_WC | SD_STATUS_RC, HOST_STATUS(host));
data->bytes_xfered = 0;
@@ -380,7 +384,7 @@
{
struct au1xmmc_host *host = (struct au1xmmc_host *)param;
- u32 status = au_readl(HOST_STATUS(host));
+ u32 status = __raw_readl(HOST_STATUS(host));
au1xmmc_data_complete(host, status);
}
@@ -412,15 +416,15 @@
max = AU1XMMC_MAX_TRANSFER;
for (count = 0; count < max; count++) {
- status = au_readl(HOST_STATUS(host));
+ status = __raw_readl(HOST_STATUS(host));
if (!(status & SD_STATUS_TH))
break;
val = *sg_ptr++;
- au_writel((unsigned long)val, HOST_TXPORT(host));
- au_sync();
+ __raw_writel((unsigned long)val, HOST_TXPORT(host));
+ wmb(); /* drain writebuffer */
}
host->pio.len -= count;
@@ -472,7 +476,7 @@
max = AU1XMMC_MAX_TRANSFER;
for (count = 0; count < max; count++) {
- status = au_readl(HOST_STATUS(host));
+ status = __raw_readl(HOST_STATUS(host));
if (!(status & SD_STATUS_NE))
break;
@@ -494,7 +498,7 @@
break;
}
- val = au_readl(HOST_RXPORT(host));
+ val = __raw_readl(HOST_RXPORT(host));
if (sg_ptr)
*sg_ptr++ = (unsigned char)(val & 0xFF);
@@ -537,10 +541,10 @@
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
- r[0] = au_readl(host->iobase + SD_RESP3);
- r[1] = au_readl(host->iobase + SD_RESP2);
- r[2] = au_readl(host->iobase + SD_RESP1);
- r[3] = au_readl(host->iobase + SD_RESP0);
+ r[0] = __raw_readl(host->iobase + SD_RESP3);
+ r[1] = __raw_readl(host->iobase + SD_RESP2);
+ r[2] = __raw_readl(host->iobase + SD_RESP1);
+ r[3] = __raw_readl(host->iobase + SD_RESP0);
/* The CRC is omitted from the response, so really
* we only got 120 bytes, but the engine expects
@@ -559,7 +563,7 @@
* that means that the OSR data starts at bit 31,
* so we can just read RESP0 and return that.
*/
- cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
+ cmd->resp[0] = __raw_readl(host->iobase + SD_RESP0);
}
}
@@ -586,7 +590,7 @@
u32 mask = SD_STATUS_DB | SD_STATUS_NE;
while((status & mask) != mask)
- status = au_readl(HOST_STATUS(host));
+ status = __raw_readl(HOST_STATUS(host));
}
au1xxx_dbdma_start(channel);
@@ -595,24 +599,17 @@
static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
{
- unsigned int pbus = get_au1x00_speed();
- unsigned int divisor;
+ unsigned int pbus = clk_get_rate(host->clk);
+ unsigned int divisor = ((pbus / rate) / 2) - 1;
u32 config;
- /* From databook:
- * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
- */
- pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
- pbus /= 2;
- divisor = ((pbus / rate) / 2) - 1;
-
- config = au_readl(HOST_CONFIG(host));
+ config = __raw_readl(HOST_CONFIG(host));
config &= ~(SD_CONFIG_DIV);
config |= (divisor & SD_CONFIG_DIV) | SD_CONFIG_DE;
- au_writel(config, HOST_CONFIG(host));
- au_sync();
+ __raw_writel(config, HOST_CONFIG(host));
+ wmb(); /* drain writebuffer */
}
static int au1xmmc_prepare_data(struct au1xmmc_host *host,
@@ -636,7 +633,7 @@
if (host->dma.len == 0)
return -ETIMEDOUT;
- au_writel(data->blksz - 1, HOST_BLKSIZE(host));
+ __raw_writel(data->blksz - 1, HOST_BLKSIZE(host));
if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
int i;
@@ -723,31 +720,34 @@
static void au1xmmc_reset_controller(struct au1xmmc_host *host)
{
/* Apply the clock */
- au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
- au_sync_delay(1);
+ __raw_writel(SD_ENABLE_CE, HOST_ENABLE(host));
+ wmb(); /* drain writebuffer */
+ mdelay(1);
- au_writel(SD_ENABLE_R | SD_ENABLE_CE, HOST_ENABLE(host));
- au_sync_delay(5);
+ __raw_writel(SD_ENABLE_R | SD_ENABLE_CE, HOST_ENABLE(host));
+ wmb(); /* drain writebuffer */
+ mdelay(5);
- au_writel(~0, HOST_STATUS(host));
- au_sync();
+ __raw_writel(~0, HOST_STATUS(host));
+ wmb(); /* drain writebuffer */
- au_writel(0, HOST_BLKSIZE(host));
- au_writel(0x001fffff, HOST_TIMEOUT(host));
- au_sync();
+ __raw_writel(0, HOST_BLKSIZE(host));
+ __raw_writel(0x001fffff, HOST_TIMEOUT(host));
+ wmb(); /* drain writebuffer */
- au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
- au_sync();
+ __raw_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
- au_writel(SD_CONFIG2_EN | SD_CONFIG2_FF, HOST_CONFIG2(host));
- au_sync_delay(1);
+ __raw_writel(SD_CONFIG2_EN | SD_CONFIG2_FF, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
+ mdelay(1);
- au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
- au_sync();
+ __raw_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
/* Configure interrupts */
- au_writel(AU1XMMC_INTERRUPTS, HOST_CONFIG(host));
- au_sync();
+ __raw_writel(AU1XMMC_INTERRUPTS, HOST_CONFIG(host));
+ wmb(); /* drain writebuffer */
}
@@ -767,7 +767,7 @@
host->clock = ios->clock;
}
- config2 = au_readl(HOST_CONFIG2(host));
+ config2 = __raw_readl(HOST_CONFIG2(host));
switch (ios->bus_width) {
case MMC_BUS_WIDTH_8:
config2 |= SD_CONFIG2_BB;
@@ -780,8 +780,8 @@
config2 &= ~(SD_CONFIG2_WB | SD_CONFIG2_BB);
break;
}
- au_writel(config2, HOST_CONFIG2(host));
- au_sync();
+ __raw_writel(config2, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
}
#define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT)
@@ -793,7 +793,7 @@
struct au1xmmc_host *host = dev_id;
u32 status;
- status = au_readl(HOST_STATUS(host));
+ status = __raw_readl(HOST_STATUS(host));
if (!(status & SD_STATUS_I))
return IRQ_NONE; /* not ours */
@@ -839,8 +839,8 @@
status);
}
- au_writel(status, HOST_STATUS(host));
- au_sync();
+ __raw_writel(status, HOST_STATUS(host));
+ wmb(); /* drain writebuffer */
return IRQ_HANDLED;
}
@@ -976,7 +976,7 @@
goto out1;
}
- host->iobase = (unsigned long)ioremap(r->start, 0x3c);
+ host->iobase = ioremap(r->start, 0x3c);
if (!host->iobase) {
dev_err(&pdev->dev, "cannot remap mmio\n");
goto out2;
@@ -1025,6 +1025,16 @@
goto out3;
}
+ host->clk = clk_get(&pdev->dev, ALCHEMY_PERIPH_CLK);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "cannot find clock\n");
+ goto out_irq;
+ }
+ if (clk_prepare_enable(host->clk)) {
+ dev_err(&pdev->dev, "cannot enable clock\n");
+ goto out_clk;
+ }
+
host->status = HOST_S_IDLE;
/* board-specific carddetect setup, if any */
@@ -1075,7 +1085,7 @@
platform_set_drvdata(pdev, host);
- pr_info(DRIVER_NAME ": MMC Controller %d set up at %8.8X"
+ pr_info(DRIVER_NAME ": MMC Controller %d set up at %p"
" (mode=%s)\n", pdev->id, host->iobase,
host->flags & HOST_F_DMA ? "dma" : "pio");
@@ -1087,10 +1097,10 @@
led_classdev_unregister(host->platdata->led);
out5:
#endif
- au_writel(0, HOST_ENABLE(host));
- au_writel(0, HOST_CONFIG(host));
- au_writel(0, HOST_CONFIG2(host));
- au_sync();
+ __raw_writel(0, HOST_ENABLE(host));
+ __raw_writel(0, HOST_CONFIG(host));
+ __raw_writel(0, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
if (host->flags & HOST_F_DBDMA)
au1xmmc_dbdma_shutdown(host);
@@ -1101,7 +1111,10 @@
if (host->platdata && host->platdata->cd_setup &&
!(mmc->caps & MMC_CAP_NEEDS_POLL))
host->platdata->cd_setup(mmc, 0);
-
+out_clk:
+ clk_disable_unprepare(host->clk);
+ clk_put(host->clk);
+out_irq:
free_irq(host->irq, host);
out3:
iounmap((void *)host->iobase);
@@ -1130,10 +1143,10 @@
!(host->mmc->caps & MMC_CAP_NEEDS_POLL))
host->platdata->cd_setup(host->mmc, 0);
- au_writel(0, HOST_ENABLE(host));
- au_writel(0, HOST_CONFIG(host));
- au_writel(0, HOST_CONFIG2(host));
- au_sync();
+ __raw_writel(0, HOST_ENABLE(host));
+ __raw_writel(0, HOST_CONFIG(host));
+ __raw_writel(0, HOST_CONFIG2(host));
+ wmb(); /* drain writebuffer */
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
@@ -1143,6 +1156,9 @@
au1xmmc_set_power(host, 0);
+ clk_disable_unprepare(host->clk);
+ clk_put(host->clk);
+
free_irq(host->irq, host);
iounmap((void *)host->iobase);
release_resource(host->ioarea);
@@ -1158,11 +1174,11 @@
{
struct au1xmmc_host *host = platform_get_drvdata(pdev);
- au_writel(0, HOST_CONFIG2(host));
- au_writel(0, HOST_CONFIG(host));
- au_writel(0xffffffff, HOST_STATUS(host));
- au_writel(0, HOST_ENABLE(host));
- au_sync();
+ __raw_writel(0, HOST_CONFIG2(host));
+ __raw_writel(0, HOST_CONFIG(host));
+ __raw_writel(0xffffffff, HOST_STATUS(host));
+ __raw_writel(0, HOST_ENABLE(host));
+ wmb(); /* drain writebuffer */
return 0;
}
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index bc5c518..77d6c17 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -41,7 +41,7 @@
{
struct nand_chip *this = mtd->priv;
u_char ret = readb(this->IO_ADDR_R);
- au_sync();
+ wmb(); /* drain writebuffer */
return ret;
}
@@ -56,7 +56,7 @@
{
struct nand_chip *this = mtd->priv;
writeb(byte, this->IO_ADDR_W);
- au_sync();
+ wmb(); /* drain writebuffer */
}
/**
@@ -69,7 +69,7 @@
{
struct nand_chip *this = mtd->priv;
u_char ret = (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
- au_sync();
+ wmb(); /* drain writebuffer */
return ret;
}
@@ -84,7 +84,7 @@
{
struct nand_chip *this = mtd->priv;
writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
- au_sync();
+ wmb(); /* drain writebuffer */
}
/**
@@ -97,7 +97,7 @@
{
struct nand_chip *this = mtd->priv;
u16 ret = readw(this->IO_ADDR_R);
- au_sync();
+ wmb(); /* drain writebuffer */
return ret;
}
@@ -116,7 +116,7 @@
for (i = 0; i < len; i++) {
writeb(buf[i], this->IO_ADDR_W);
- au_sync();
+ wmb(); /* drain writebuffer */
}
}
@@ -135,7 +135,7 @@
for (i = 0; i < len; i++) {
buf[i] = readb(this->IO_ADDR_R);
- au_sync();
+ wmb(); /* drain writebuffer */
}
}
@@ -156,7 +156,7 @@
for (i = 0; i < len; i++) {
writew(p[i], this->IO_ADDR_W);
- au_sync();
+ wmb(); /* drain writebuffer */
}
}
@@ -178,7 +178,7 @@
for (i = 0; i < len; i++) {
p[i] = readw(this->IO_ADDR_R);
- au_sync();
+ wmb(); /* drain writebuffer */
}
}
@@ -223,26 +223,23 @@
case NAND_CTL_SETNCE:
/* assert (force assert) chip enable */
- au_writel((1 << (4 + ctx->cs)), MEM_STNDCTL);
+ alchemy_wrsmem((1 << (4 + ctx->cs)), AU1000_MEM_STNDCTL);
break;
case NAND_CTL_CLRNCE:
/* deassert chip enable */
- au_writel(0, MEM_STNDCTL);
+ alchemy_wrsmem(0, AU1000_MEM_STNDCTL);
break;
}
this->IO_ADDR_R = this->IO_ADDR_W;
- /* Drain the writebuffer */
- au_sync();
+ wmb(); /* Drain the writebuffer */
}
int au1550_device_ready(struct mtd_info *mtd)
{
- int ret = (au_readl(MEM_STSTAT) & 0x1) ? 1 : 0;
- au_sync();
- return ret;
+ return (alchemy_rdsmem(AU1000_MEM_STSTAT) & 0x1) ? 1 : 0;
}
/**
diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
index a78e4c1..31c48a7 100644
--- a/drivers/net/ethernet/amd/au1000_eth.c
+++ b/drivers/net/ethernet/amd/au1000_eth.c
@@ -89,6 +89,124 @@
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+/* AU1000 MAC registers and bits */
+#define MAC_CONTROL 0x0
+# define MAC_RX_ENABLE (1 << 2)
+# define MAC_TX_ENABLE (1 << 3)
+# define MAC_DEF_CHECK (1 << 5)
+# define MAC_SET_BL(X) (((X) & 0x3) << 6)
+# define MAC_AUTO_PAD (1 << 8)
+# define MAC_DISABLE_RETRY (1 << 10)
+# define MAC_DISABLE_BCAST (1 << 11)
+# define MAC_LATE_COL (1 << 12)
+# define MAC_HASH_MODE (1 << 13)
+# define MAC_HASH_ONLY (1 << 15)
+# define MAC_PASS_ALL (1 << 16)
+# define MAC_INVERSE_FILTER (1 << 17)
+# define MAC_PROMISCUOUS (1 << 18)
+# define MAC_PASS_ALL_MULTI (1 << 19)
+# define MAC_FULL_DUPLEX (1 << 20)
+# define MAC_NORMAL_MODE 0
+# define MAC_INT_LOOPBACK (1 << 21)
+# define MAC_EXT_LOOPBACK (1 << 22)
+# define MAC_DISABLE_RX_OWN (1 << 23)
+# define MAC_BIG_ENDIAN (1 << 30)
+# define MAC_RX_ALL (1 << 31)
+#define MAC_ADDRESS_HIGH 0x4
+#define MAC_ADDRESS_LOW 0x8
+#define MAC_MCAST_HIGH 0xC
+#define MAC_MCAST_LOW 0x10
+#define MAC_MII_CNTRL 0x14
+# define MAC_MII_BUSY (1 << 0)
+# define MAC_MII_READ 0
+# define MAC_MII_WRITE (1 << 1)
+# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
+# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
+#define MAC_MII_DATA 0x18
+#define MAC_FLOW_CNTRL 0x1C
+# define MAC_FLOW_CNTRL_BUSY (1 << 0)
+# define MAC_FLOW_CNTRL_ENABLE (1 << 1)
+# define MAC_PASS_CONTROL (1 << 2)
+# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16)
+#define MAC_VLAN1_TAG 0x20
+#define MAC_VLAN2_TAG 0x24
+
+/* Ethernet Controller Enable */
+# define MAC_EN_CLOCK_ENABLE (1 << 0)
+# define MAC_EN_RESET0 (1 << 1)
+# define MAC_EN_TOSS (0 << 2)
+# define MAC_EN_CACHEABLE (1 << 3)
+# define MAC_EN_RESET1 (1 << 4)
+# define MAC_EN_RESET2 (1 << 5)
+# define MAC_DMA_RESET (1 << 6)
+
+/* Ethernet Controller DMA Channels */
+/* offsets from MAC_TX_RING_ADDR address */
+#define MAC_TX_BUFF0_STATUS 0x0
+# define TX_FRAME_ABORTED (1 << 0)
+# define TX_JAB_TIMEOUT (1 << 1)
+# define TX_NO_CARRIER (1 << 2)
+# define TX_LOSS_CARRIER (1 << 3)
+# define TX_EXC_DEF (1 << 4)
+# define TX_LATE_COLL_ABORT (1 << 5)
+# define TX_EXC_COLL (1 << 6)
+# define TX_UNDERRUN (1 << 7)
+# define TX_DEFERRED (1 << 8)
+# define TX_LATE_COLL (1 << 9)
+# define TX_COLL_CNT_MASK (0xF << 10)
+# define TX_PKT_RETRY (1 << 31)
+#define MAC_TX_BUFF0_ADDR 0x4
+# define TX_DMA_ENABLE (1 << 0)
+# define TX_T_DONE (1 << 1)
+# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+#define MAC_TX_BUFF0_LEN 0x8
+#define MAC_TX_BUFF1_STATUS 0x10
+#define MAC_TX_BUFF1_ADDR 0x14
+#define MAC_TX_BUFF1_LEN 0x18
+#define MAC_TX_BUFF2_STATUS 0x20
+#define MAC_TX_BUFF2_ADDR 0x24
+#define MAC_TX_BUFF2_LEN 0x28
+#define MAC_TX_BUFF3_STATUS 0x30
+#define MAC_TX_BUFF3_ADDR 0x34
+#define MAC_TX_BUFF3_LEN 0x38
+
+/* offsets from MAC_RX_RING_ADDR */
+#define MAC_RX_BUFF0_STATUS 0x0
+# define RX_FRAME_LEN_MASK 0x3fff
+# define RX_WDOG_TIMER (1 << 14)
+# define RX_RUNT (1 << 15)
+# define RX_OVERLEN (1 << 16)
+# define RX_COLL (1 << 17)
+# define RX_ETHER (1 << 18)
+# define RX_MII_ERROR (1 << 19)
+# define RX_DRIBBLING (1 << 20)
+# define RX_CRC_ERROR (1 << 21)
+# define RX_VLAN1 (1 << 22)
+# define RX_VLAN2 (1 << 23)
+# define RX_LEN_ERROR (1 << 24)
+# define RX_CNTRL_FRAME (1 << 25)
+# define RX_U_CNTRL_FRAME (1 << 26)
+# define RX_MCAST_FRAME (1 << 27)
+# define RX_BCAST_FRAME (1 << 28)
+# define RX_FILTER_FAIL (1 << 29)
+# define RX_PACKET_FILTER (1 << 30)
+# define RX_MISSED_FRAME (1 << 31)
+
+# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \
+ RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR 0x4
+# define RX_DMA_ENABLE (1 << 0)
+# define RX_T_DONE (1 << 1)
+# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0)
+#define MAC_RX_BUFF1_STATUS 0x10
+#define MAC_RX_BUFF1_ADDR 0x14
+#define MAC_RX_BUFF2_STATUS 0x20
+#define MAC_RX_BUFF2_ADDR 0x24
+#define MAC_RX_BUFF3_STATUS 0x30
+#define MAC_RX_BUFF3_ADDR 0x34
+
/*
* Theory of operation
*
@@ -152,10 +270,12 @@
if (force_reset || (!aup->mac_enabled)) {
writel(MAC_EN_CLOCK_ENABLE, aup->enable);
- au_sync_delay(2);
+ wmb(); /* drain writebuffer */
+ mdelay(2);
writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
| MAC_EN_CLOCK_ENABLE), aup->enable);
- au_sync_delay(2);
+ wmb(); /* drain writebuffer */
+ mdelay(2);
aup->mac_enabled = 1;
}
@@ -273,7 +393,8 @@
reg = readl(&aup->mac->control);
reg &= ~(MAC_RX_ENABLE | MAC_TX_ENABLE);
writel(reg, &aup->mac->control);
- au_sync_delay(10);
+ wmb(); /* drain writebuffer */
+ mdelay(10);
}
static void au1000_enable_rx_tx(struct net_device *dev)
@@ -286,7 +407,8 @@
reg = readl(&aup->mac->control);
reg |= (MAC_RX_ENABLE | MAC_TX_ENABLE);
writel(reg, &aup->mac->control);
- au_sync_delay(10);
+ wmb(); /* drain writebuffer */
+ mdelay(10);
}
static void
@@ -336,7 +458,8 @@
reg |= MAC_DISABLE_RX_OWN;
}
writel(reg, &aup->mac->control);
- au_sync_delay(1);
+ wmb(); /* drain writebuffer */
+ mdelay(1);
au1000_enable_rx_tx(dev);
aup->old_duplex = phydev->duplex;
@@ -500,9 +623,11 @@
au1000_hard_stop(dev);
writel(MAC_EN_CLOCK_ENABLE, aup->enable);
- au_sync_delay(2);
+ wmb(); /* drain writebuffer */
+ mdelay(2);
writel(0, aup->enable);
- au_sync_delay(2);
+ wmb(); /* drain writebuffer */
+ mdelay(2);
aup->tx_full = 0;
for (i = 0; i < NUM_RX_DMA; i++) {
@@ -652,7 +777,7 @@
for (i = 0; i < NUM_RX_DMA; i++)
aup->rx_dma_ring[i]->buff_stat |= RX_DMA_ENABLE;
- au_sync();
+ wmb(); /* drain writebuffer */
control = MAC_RX_ENABLE | MAC_TX_ENABLE;
#ifndef CONFIG_CPU_LITTLE_ENDIAN
@@ -669,7 +794,7 @@
writel(control, &aup->mac->control);
writel(0x8100, &aup->mac->vlan1_tag); /* activate vlan support */
- au_sync();
+ wmb(); /* drain writebuffer */
spin_unlock_irqrestore(&aup->lock, flags);
return 0;
@@ -760,7 +885,7 @@
}
prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE);
aup->rx_head = (aup->rx_head + 1) & (NUM_RX_DMA - 1);
- au_sync();
+ wmb(); /* drain writebuffer */
/* next descriptor */
prxd = aup->rx_dma_ring[aup->rx_head];
@@ -808,7 +933,7 @@
au1000_update_tx_stats(dev, ptxd->status);
ptxd->buff_stat &= ~TX_T_DONE;
ptxd->len = 0;
- au_sync();
+ wmb(); /* drain writebuffer */
aup->tx_tail = (aup->tx_tail + 1) & (NUM_TX_DMA - 1);
ptxd = aup->tx_dma_ring[aup->tx_tail];
@@ -939,7 +1064,7 @@
ps->tx_bytes += ptxd->len;
ptxd->buff_stat = pDB->dma_addr | TX_DMA_ENABLE;
- au_sync();
+ wmb(); /* drain writebuffer */
dev_kfree_skb(skb);
aup->tx_head = (aup->tx_head + 1) & (NUM_TX_DMA - 1);
return NETDEV_TX_OK;
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 5f91e3e..aab2cf7 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -18,6 +18,7 @@
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/interrupt.h>
@@ -175,6 +176,7 @@
struct resource *ioarea;
struct au1k_irda_platform_data *platdata;
+ struct clk *irda_clk;
};
static int qos_mtt_bits = 0x07; /* 1 ms or more */
@@ -514,9 +516,39 @@
static int au1k_init(struct net_device *dev)
{
struct au1k_private *aup = netdev_priv(dev);
- u32 enable, ring_address;
+ u32 enable, ring_address, phyck;
+ struct clk *c;
int i;
+ c = clk_get(NULL, "irda_clk");
+ if (IS_ERR(c))
+ return PTR_ERR(c);
+ i = clk_prepare_enable(c);
+ if (i) {
+ clk_put(c);
+ return i;
+ }
+
+ switch (clk_get_rate(c)) {
+ case 40000000:
+ phyck = IR_PHYCLK_40MHZ;
+ break;
+ case 48000000:
+ phyck = IR_PHYCLK_48MHZ;
+ break;
+ case 56000000:
+ phyck = IR_PHYCLK_56MHZ;
+ break;
+ case 64000000:
+ phyck = IR_PHYCLK_64MHZ;
+ break;
+ default:
+ clk_disable_unprepare(c);
+ clk_put(c);
+ return -EINVAL;
+ }
+ aup->irda_clk = c;
+
enable = IR_HC | IR_CE | IR_C;
#ifndef CONFIG_CPU_LITTLE_ENDIAN
enable |= IR_BE;
@@ -545,7 +577,7 @@
irda_write(aup, IR_RING_SIZE,
(RING_SIZE_64 << 8) | (RING_SIZE_64 << 12));
- irda_write(aup, IR_CONFIG_2, IR_PHYCLK_48MHZ | IR_ONE_PIN);
+ irda_write(aup, IR_CONFIG_2, phyck | IR_ONE_PIN);
irda_write(aup, IR_RING_ADDR_CMPR, 0);
au1k_irda_set_speed(dev, 9600);
@@ -619,6 +651,9 @@
free_irq(aup->irq_tx, dev);
free_irq(aup->irq_rx, dev);
+ clk_disable_unprepare(aup->irda_clk);
+ clk_put(aup->irda_clk);
+
return 0;
}
@@ -853,6 +888,7 @@
struct au1k_private *aup;
struct net_device *dev;
struct resource *r;
+ struct clk *c;
int err;
dev = alloc_irdadev(sizeof(struct au1k_private));
@@ -886,6 +922,14 @@
if (!aup->ioarea)
goto out;
+ /* bail out early if clock doesn't exist */
+ c = clk_get(NULL, "irda_clk");
+ if (IS_ERR(c)) {
+ err = PTR_ERR(c);
+ goto out;
+ }
+ clk_put(c);
+
aup->iobase = ioremap_nocache(r->start, resource_size(r));
if (!aup->iobase)
goto out2;
diff --git a/drivers/rtc/rtc-au1xxx.c b/drivers/rtc/rtc-au1xxx.c
index ed526a1..fd25e23 100644
--- a/drivers/rtc/rtc-au1xxx.c
+++ b/drivers/rtc/rtc-au1xxx.c
@@ -32,7 +32,7 @@
{
unsigned long t;
- t = au_readl(SYS_TOYREAD);
+ t = alchemy_rdsys(AU1000_SYS_TOYREAD);
rtc_time_to_tm(t, tm);
@@ -45,13 +45,12 @@
rtc_tm_to_time(tm, &t);
- au_writel(t, SYS_TOYWRITE);
- au_sync();
+ alchemy_wrsys(t, AU1000_SYS_TOYWRITE);
/* wait for the pending register write to succeed. This can
* take up to 6 seconds...
*/
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S)
+ while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
msleep(1);
return 0;
@@ -68,7 +67,7 @@
unsigned long t;
int ret;
- t = au_readl(SYS_COUNTER_CNTRL);
+ t = alchemy_rdsys(AU1000_SYS_CNTRCTRL);
if (!(t & CNTR_OK)) {
dev_err(&pdev->dev, "counters not working; aborting.\n");
ret = -ENODEV;
@@ -78,10 +77,10 @@
ret = -ETIMEDOUT;
/* set counter0 tickrate to 1Hz if necessary */
- if (au_readl(SYS_TOYTRIM) != 32767) {
+ if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767) {
/* wait until hardware gives access to TRIM register */
t = 0x00100000;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && --t)
+ while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T0S) && --t)
msleep(1);
if (!t) {
@@ -93,12 +92,11 @@
}
/* set 1Hz TOY tick rate */
- au_writel(32767, SYS_TOYTRIM);
- au_sync();
+ alchemy_wrsys(32767, AU1000_SYS_TOYTRIM);
}
/* wait until the hardware allows writes to the counter reg */
- while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S)
+ while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
msleep(1);
rtcdev = devm_rtc_device_register(&pdev->dev, "rtc-au1xxx",
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c
index 67375a1..ffb42f1 100644
--- a/drivers/spi/spi-au1550.c
+++ b/drivers/spi/spi-au1550.c
@@ -141,13 +141,13 @@
PSC_SPIMSK_MM | PSC_SPIMSK_RR | PSC_SPIMSK_RO
| PSC_SPIMSK_RU | PSC_SPIMSK_TR | PSC_SPIMSK_TO
| PSC_SPIMSK_TU | PSC_SPIMSK_SD | PSC_SPIMSK_MD;
- au_sync();
+ wmb(); /* drain writebuffer */
hw->regs->psc_spievent =
PSC_SPIEVNT_MM | PSC_SPIEVNT_RR | PSC_SPIEVNT_RO
| PSC_SPIEVNT_RU | PSC_SPIEVNT_TR | PSC_SPIEVNT_TO
| PSC_SPIEVNT_TU | PSC_SPIEVNT_SD | PSC_SPIEVNT_MD;
- au_sync();
+ wmb(); /* drain writebuffer */
}
static void au1550_spi_reset_fifos(struct au1550_spi *hw)
@@ -155,10 +155,10 @@
u32 pcr;
hw->regs->psc_spipcr = PSC_SPIPCR_RC | PSC_SPIPCR_TC;
- au_sync();
+ wmb(); /* drain writebuffer */
do {
pcr = hw->regs->psc_spipcr;
- au_sync();
+ wmb(); /* drain writebuffer */
} while (pcr != 0);
}
@@ -188,9 +188,9 @@
au1550_spi_bits_handlers_set(hw, spi->bits_per_word);
cfg = hw->regs->psc_spicfg;
- au_sync();
+ wmb(); /* drain writebuffer */
hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE;
- au_sync();
+ wmb(); /* drain writebuffer */
if (spi->mode & SPI_CPOL)
cfg |= PSC_SPICFG_BI;
@@ -218,10 +218,10 @@
cfg |= au1550_spi_baudcfg(hw, spi->max_speed_hz);
hw->regs->psc_spicfg = cfg | PSC_SPICFG_DE_ENABLE;
- au_sync();
+ wmb(); /* drain writebuffer */
do {
stat = hw->regs->psc_spistat;
- au_sync();
+ wmb(); /* drain writebuffer */
} while ((stat & PSC_SPISTAT_DR) == 0);
if (hw->pdata->activate_cs)
@@ -252,9 +252,9 @@
au1550_spi_bits_handlers_set(hw, spi->bits_per_word);
cfg = hw->regs->psc_spicfg;
- au_sync();
+ wmb(); /* drain writebuffer */
hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE;
- au_sync();
+ wmb(); /* drain writebuffer */
if (hw->usedma && bpw <= 8)
cfg &= ~PSC_SPICFG_DD_DISABLE;
@@ -268,12 +268,12 @@
cfg |= au1550_spi_baudcfg(hw, hz);
hw->regs->psc_spicfg = cfg;
- au_sync();
+ wmb(); /* drain writebuffer */
if (cfg & PSC_SPICFG_DE_ENABLE) {
do {
stat = hw->regs->psc_spistat;
- au_sync();
+ wmb(); /* drain writebuffer */
} while ((stat & PSC_SPISTAT_DR) == 0);
}
@@ -396,11 +396,11 @@
/* by default enable nearly all events interrupt */
hw->regs->psc_spimsk = PSC_SPIMSK_SD;
- au_sync();
+ wmb(); /* drain writebuffer */
/* start the transfer */
hw->regs->psc_spipcr = PSC_SPIPCR_MS;
- au_sync();
+ wmb(); /* drain writebuffer */
wait_for_completion(&hw->master_done);
@@ -429,7 +429,7 @@
stat = hw->regs->psc_spistat;
evnt = hw->regs->psc_spievent;
- au_sync();
+ wmb(); /* drain writebuffer */
if ((stat & PSC_SPISTAT_DI) == 0) {
dev_err(hw->dev, "Unexpected IRQ!\n");
return IRQ_NONE;
@@ -484,7 +484,7 @@
static void au1550_spi_rx_word_##size(struct au1550_spi *hw) \
{ \
u32 fifoword = hw->regs->psc_spitxrx & (u32)(mask); \
- au_sync(); \
+ wmb(); /* drain writebuffer */ \
if (hw->rx) { \
*(u##size *)hw->rx = (u##size)fifoword; \
hw->rx += (size) / 8; \
@@ -504,7 +504,7 @@
if (hw->tx_count >= hw->len) \
fifoword |= PSC_SPITXRX_LC; \
hw->regs->psc_spitxrx = fifoword; \
- au_sync(); \
+ wmb(); /* drain writebuffer */ \
}
AU1550_SPI_RX_WORD(8,0xff)
@@ -539,18 +539,18 @@
}
stat = hw->regs->psc_spistat;
- au_sync();
+ wmb(); /* drain writebuffer */
if (stat & PSC_SPISTAT_TF)
break;
}
/* enable event interrupts */
hw->regs->psc_spimsk = mask;
- au_sync();
+ wmb(); /* drain writebuffer */
/* start the transfer */
hw->regs->psc_spipcr = PSC_SPIPCR_MS;
- au_sync();
+ wmb(); /* drain writebuffer */
wait_for_completion(&hw->master_done);
@@ -564,7 +564,7 @@
stat = hw->regs->psc_spistat;
evnt = hw->regs->psc_spievent;
- au_sync();
+ wmb(); /* drain writebuffer */
if ((stat & PSC_SPISTAT_DI) == 0) {
dev_err(hw->dev, "Unexpected IRQ!\n");
return IRQ_NONE;
@@ -594,7 +594,7 @@
do {
busy = 0;
stat = hw->regs->psc_spistat;
- au_sync();
+ wmb(); /* drain writebuffer */
/*
* Take care to not let the Rx FIFO overflow.
@@ -615,7 +615,7 @@
} while (busy);
hw->regs->psc_spievent = PSC_SPIEVNT_RR | PSC_SPIEVNT_TR;
- au_sync();
+ wmb(); /* drain writebuffer */
/*
* Restart the SPI transmission in case of a transmit underflow.
@@ -634,9 +634,9 @@
*/
if (evnt & PSC_SPIEVNT_TU) {
hw->regs->psc_spievent = PSC_SPIEVNT_TU | PSC_SPIEVNT_MD;
- au_sync();
+ wmb(); /* drain writebuffer */
hw->regs->psc_spipcr = PSC_SPIPCR_MS;
- au_sync();
+ wmb(); /* drain writebuffer */
}
if (hw->rx_count >= hw->len) {
@@ -690,19 +690,19 @@
/* set up the PSC for SPI mode */
hw->regs->psc_ctrl = PSC_CTRL_DISABLE;
- au_sync();
+ wmb(); /* drain writebuffer */
hw->regs->psc_sel = PSC_SEL_PS_SPIMODE;
- au_sync();
+ wmb(); /* drain writebuffer */
hw->regs->psc_spicfg = 0;
- au_sync();
+ wmb(); /* drain writebuffer */
hw->regs->psc_ctrl = PSC_CTRL_ENABLE;
- au_sync();
+ wmb(); /* drain writebuffer */
do {
stat = hw->regs->psc_spistat;
- au_sync();
+ wmb(); /* drain writebuffer */
} while ((stat & PSC_SPISTAT_SR) == 0);
@@ -717,16 +717,16 @@
#endif
hw->regs->psc_spicfg = cfg;
- au_sync();
+ wmb(); /* drain writebuffer */
au1550_spi_mask_ack_all(hw);
hw->regs->psc_spicfg |= PSC_SPICFG_DE_ENABLE;
- au_sync();
+ wmb(); /* drain writebuffer */
do {
stat = hw->regs->psc_spistat;
- au_sync();
+ wmb(); /* drain writebuffer */
} while ((stat & PSC_SPISTAT_DR) == 0);
au1550_spi_reset_fifos(hw);
diff --git a/drivers/video/fbdev/au1100fb.c b/drivers/video/fbdev/au1100fb.c
index 372d4ae..0676746e 100644
--- a/drivers/video/fbdev/au1100fb.c
+++ b/drivers/video/fbdev/au1100fb.c
@@ -41,6 +41,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -113,7 +114,7 @@
case VESA_NO_BLANKING:
/* Turn on panel */
fbdev->regs->lcd_control |= LCD_CONTROL_GO;
- au_sync();
+ wmb(); /* drain writebuffer */
break;
case VESA_VSYNC_SUSPEND:
@@ -121,7 +122,7 @@
case VESA_POWERDOWN:
/* Turn off panel */
fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
- au_sync();
+ wmb(); /* drain writebuffer */
break;
default:
break;
@@ -434,7 +435,7 @@
struct au1100fb_device *fbdev = NULL;
struct resource *regs_res;
unsigned long page;
- u32 sys_clksrc;
+ struct clk *c;
/* Allocate new device private */
fbdev = devm_kzalloc(&dev->dev, sizeof(struct au1100fb_device),
@@ -473,6 +474,13 @@
print_dbg("Register memory map at %p", fbdev->regs);
print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len);
+ c = clk_get(NULL, "lcd_intclk");
+ if (!IS_ERR(c)) {
+ fbdev->lcdclk = c;
+ clk_set_rate(c, 48000000);
+ clk_prepare_enable(c);
+ }
+
/* Allocate the framebuffer to the maximum screen size * nbr of video buffers */
fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
(fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
@@ -506,10 +514,6 @@
print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
- /* Setup LCD clock to AUX (48 MHz) */
- sys_clksrc = au_readl(SYS_CLKSRC) & ~(SYS_CS_ML_MASK | SYS_CS_DL | SYS_CS_CL);
- au_writel((sys_clksrc | (1 << SYS_CS_ML_BIT)), SYS_CLKSRC);
-
/* load the panel info into the var struct */
au1100fb_var.bits_per_pixel = fbdev->panel->bpp;
au1100fb_var.xres = fbdev->panel->xres;
@@ -546,6 +550,10 @@
return 0;
failed:
+ if (fbdev->lcdclk) {
+ clk_disable_unprepare(fbdev->lcdclk);
+ clk_put(fbdev->lcdclk);
+ }
if (fbdev->fb_mem) {
dma_free_noncoherent(&dev->dev, fbdev->fb_len, fbdev->fb_mem,
fbdev->fb_phys);
@@ -576,11 +584,15 @@
fb_dealloc_cmap(&fbdev->info.cmap);
+ if (fbdev->lcdclk) {
+ clk_disable_unprepare(fbdev->lcdclk);
+ clk_put(fbdev->lcdclk);
+ }
+
return 0;
}
#ifdef CONFIG_PM
-static u32 sys_clksrc;
static struct au1100fb_regs fbregs;
int au1100fb_drv_suspend(struct platform_device *dev, pm_message_t state)
@@ -590,14 +602,11 @@
if (!fbdev)
return 0;
- /* Save the clock source state */
- sys_clksrc = au_readl(SYS_CLKSRC);
-
/* Blank the LCD */
au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
- /* Stop LCD clocking */
- au_writel(sys_clksrc & ~SYS_CS_ML_MASK, SYS_CLKSRC);
+ if (fbdev->lcdclk)
+ clk_disable(fbdev->lcdclk);
memcpy(&fbregs, fbdev->regs, sizeof(struct au1100fb_regs));
@@ -613,8 +622,8 @@
memcpy(fbdev->regs, &fbregs, sizeof(struct au1100fb_regs));
- /* Restart LCD clocking */
- au_writel(sys_clksrc, SYS_CLKSRC);
+ if (fbdev->lcdclk)
+ clk_enable(fbdev->lcdclk);
/* Unblank the LCD */
au1100fb_fb_blank(VESA_NO_BLANKING, &fbdev->info);
diff --git a/drivers/video/fbdev/au1100fb.h b/drivers/video/fbdev/au1100fb.h
index 12d9642d..9af1993 100644
--- a/drivers/video/fbdev/au1100fb.h
+++ b/drivers/video/fbdev/au1100fb.h
@@ -109,6 +109,7 @@
size_t fb_len;
dma_addr_t fb_phys;
int panel_idx;
+ struct clk *lcdclk;
};
/********************************************************************/
diff --git a/drivers/video/fbdev/au1200fb.c b/drivers/video/fbdev/au1200fb.c
index 4cfba78..40494db 100644
--- a/drivers/video/fbdev/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
@@ -30,6 +30,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
@@ -330,9 +331,8 @@
uint32 mode_pwmhi;
uint32 mode_outmask;
uint32 mode_fifoctrl;
- uint32 mode_toyclksrc;
uint32 mode_backlight;
- uint32 mode_auxpll;
+ uint32 lcdclk;
#define Xres min_xres
#define Yres min_yres
u32 min_xres; /* Minimum horizontal resolution */
@@ -379,9 +379,8 @@
.mode_pwmhi = 0x00000000,
.mode_outmask = 0x00FFFFFF,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .lcdclk = 96,
320, 320,
240, 240,
},
@@ -407,9 +406,8 @@
.mode_pwmhi = 0x00000000,
.mode_outmask = 0x00FFFFFF,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .lcdclk = 96,
640, 480,
640, 480,
},
@@ -435,9 +433,8 @@
.mode_pwmhi = 0x00000000,
.mode_outmask = 0x00FFFFFF,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .lcdclk = 96,
800, 800,
600, 600,
},
@@ -463,9 +460,8 @@
.mode_pwmhi = 0x00000000,
.mode_outmask = 0x00FFFFFF,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 6, /* 72MHz AUXPLL */
+ .lcdclk = 72,
1024, 1024,
768, 768,
},
@@ -491,9 +487,8 @@
.mode_pwmhi = 0x00000000,
.mode_outmask = 0x00FFFFFF,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 10, /* 120MHz AUXPLL */
+ .lcdclk = 120,
1280, 1280,
1024, 1024,
},
@@ -519,9 +514,8 @@
.mode_pwmhi = 0x03400000, /* SCB 0x0 */
.mode_outmask = 0x00FFFFFF,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .lcdclk = 96,
1024, 1024,
768, 768,
},
@@ -550,9 +544,8 @@
.mode_pwmhi = 0x03400000,
.mode_outmask = 0x00fcfcfc,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .lcdclk = 96,
640, 480,
640, 480,
},
@@ -581,9 +574,8 @@
.mode_pwmhi = 0x03400000,
.mode_outmask = 0x00fcfcfc,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .lcdclk = 96, /* 96MHz AUXPLL */
320, 320,
240, 240,
},
@@ -612,9 +604,8 @@
.mode_pwmhi = 0x03400000,
.mode_outmask = 0x00fcfcfc,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .lcdclk = 96,
856, 856,
480, 480,
},
@@ -646,9 +637,8 @@
.mode_pwmhi = 0x00000000,
.mode_outmask = 0x00FFFFFF,
.mode_fifoctrl = 0x2f2f2f2f,
- .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
- .mode_auxpll = (48/12) * 2,
+ .lcdclk = 96,
800, 800,
480, 480,
},
@@ -764,7 +754,7 @@
/* Disable the window while making changes, then restore WINEN */
winenable = lcd->winenable & (1 << plane);
- au_sync();
+ wmb(); /* drain writebuffer */
lcd->winenable &= ~(1 << plane);
lcd->window[plane].winctrl0 = winctrl0;
lcd->window[plane].winctrl1 = winctrl1;
@@ -772,7 +762,7 @@
lcd->window[plane].winbuf1 = fbdev->fb_phys;
lcd->window[plane].winbufctrl = 0; /* select winbuf0 */
lcd->winenable |= winenable;
- au_sync();
+ wmb(); /* drain writebuffer */
return 0;
}
@@ -788,22 +778,21 @@
/* Make sure all windows disabled */
winenable = lcd->winenable;
lcd->winenable = 0;
- au_sync();
+ wmb(); /* drain writebuffer */
/*
* Ensure everything is disabled before reconfiguring
*/
if (lcd->screen & LCD_SCREEN_SEN) {
/* Wait for vertical sync period */
lcd->intstatus = LCD_INT_SS;
- while ((lcd->intstatus & LCD_INT_SS) == 0) {
- au_sync();
- }
+ while ((lcd->intstatus & LCD_INT_SS) == 0)
+ ;
lcd->screen &= ~LCD_SCREEN_SEN; /*disable the controller*/
do {
lcd->intstatus = lcd->intstatus; /*clear interrupts*/
- au_sync();
+ wmb(); /* drain writebuffer */
/*wait for controller to shut down*/
} while ((lcd->intstatus & LCD_INT_SD) == 0);
@@ -829,11 +818,17 @@
*/
if (!(panel->mode_clkcontrol & LCD_CLKCONTROL_EXT))
{
- uint32 sys_clksrc;
- au_writel(panel->mode_auxpll, SYS_AUXPLL);
- sys_clksrc = au_readl(SYS_CLKSRC) & ~0x0000001f;
- sys_clksrc |= panel->mode_toyclksrc;
- au_writel(sys_clksrc, SYS_CLKSRC);
+ struct clk *c = clk_get(NULL, "lcd_intclk");
+ long r, pc = panel->lcdclk * 1000000;
+
+ if (!IS_ERR(c)) {
+ r = clk_round_rate(c, pc);
+ if ((pc - r) < (pc / 10)) { /* 10% slack */
+ clk_set_rate(c, r);
+ clk_prepare_enable(c);
+ }
+ clk_put(c);
+ }
}
/*
@@ -847,7 +842,7 @@
lcd->pwmhi = panel->mode_pwmhi;
lcd->outmask = panel->mode_outmask;
lcd->fifoctrl = panel->mode_fifoctrl;
- au_sync();
+ wmb(); /* drain writebuffer */
/* fixme: Check window settings to make sure still valid
* for new geometry */
@@ -863,7 +858,7 @@
* Re-enable screen now that it is configured
*/
lcd->screen |= LCD_SCREEN_SEN;
- au_sync();
+ wmb(); /* drain writebuffer */
/* Call init of panel */
if (pd->panel_init)
@@ -956,7 +951,7 @@
| LCD_WINCTRL2_SCY_1
) ;
lcd->winenable |= win->w[plane].mode_winenable;
- au_sync();
+ wmb(); /* drain writebuffer */
}
@@ -1270,7 +1265,7 @@
if (pdata->flags & SCREEN_MASK)
lcd->colorkeymsk = pdata->mask;
- au_sync();
+ wmb(); /* drain writebuffer */
}
static void get_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
@@ -1288,7 +1283,7 @@
hi1 = (lcd->pwmhi >> 16) + 1;
divider = (lcd->pwmdiv & 0x3FFFF) + 1;
pdata->brightness = ((hi1 << 8) / divider) - 1;
- au_sync();
+ wmb(); /* drain writebuffer */
}
static void set_window(unsigned int plane,
@@ -1387,7 +1382,7 @@
val |= (pdata->enable & 1) << plane;
lcd->winenable = val;
}
- au_sync();
+ wmb(); /* drain writebuffer */
}
static void get_window(unsigned int plane,
@@ -1414,7 +1409,7 @@
pdata->ram_array_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_RAM) >> 21;
pdata->enable = (lcd->winenable >> plane) & 1;
- au_sync();
+ wmb(); /* drain writebuffer */
}
static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
@@ -1511,7 +1506,7 @@
{
/* Nothing to do for now, just clear any pending interrupt */
lcd->intstatus = lcd->intstatus;
- au_sync();
+ wmb(); /* drain writebuffer */
return IRQ_HANDLED;
}
@@ -1809,7 +1804,7 @@
au1200_setpanel(NULL, pd);
lcd->outmask = 0;
- au_sync();
+ wmb(); /* drain writebuffer */
return 0;
}
diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c
index 4baf2d7..8453531 100644
--- a/drivers/watchdog/octeon-wdt-main.c
+++ b/drivers/watchdog/octeon-wdt-main.c
@@ -145,35 +145,39 @@
uasm_i_mfc0(&p, K0, C0_STATUS);
#ifdef CONFIG_HOTPLUG_CPU
- uasm_il_bbit0(&p, &r, K0, ilog2(ST0_NMI), label_enter_bootloader);
+ if (octeon_bootloader_entry_addr)
+ uasm_il_bbit0(&p, &r, K0, ilog2(ST0_NMI),
+ label_enter_bootloader);
#endif
/* Force 64-bit addressing enabled */
uasm_i_ori(&p, K0, K0, ST0_UX | ST0_SX | ST0_KX);
uasm_i_mtc0(&p, K0, C0_STATUS);
#ifdef CONFIG_HOTPLUG_CPU
- uasm_i_mfc0(&p, K0, C0_EBASE);
- /* Coreid number in K0 */
- uasm_i_andi(&p, K0, K0, 0xf);
- /* 8 * coreid in bits 16-31 */
- uasm_i_dsll_safe(&p, K0, K0, 3 + 16);
- uasm_i_ori(&p, K0, K0, 0x8001);
- uasm_i_dsll_safe(&p, K0, K0, 16);
- uasm_i_ori(&p, K0, K0, 0x0700);
- uasm_i_drotr_safe(&p, K0, K0, 32);
- /*
- * Should result in: 0x8001,0700,0000,8*coreid which is
- * CVMX_CIU_WDOGX(coreid) - 0x0500
- *
- * Now ld K0, CVMX_CIU_WDOGX(coreid)
- */
- uasm_i_ld(&p, K0, 0x500, K0);
- /*
- * If bit one set handle the NMI as a watchdog event.
- * otherwise transfer control to bootloader.
- */
- uasm_il_bbit0(&p, &r, K0, 1, label_enter_bootloader);
- uasm_i_nop(&p);
+ if (octeon_bootloader_entry_addr) {
+ uasm_i_mfc0(&p, K0, C0_EBASE);
+ /* Coreid number in K0 */
+ uasm_i_andi(&p, K0, K0, 0xf);
+ /* 8 * coreid in bits 16-31 */
+ uasm_i_dsll_safe(&p, K0, K0, 3 + 16);
+ uasm_i_ori(&p, K0, K0, 0x8001);
+ uasm_i_dsll_safe(&p, K0, K0, 16);
+ uasm_i_ori(&p, K0, K0, 0x0700);
+ uasm_i_drotr_safe(&p, K0, K0, 32);
+ /*
+ * Should result in: 0x8001,0700,0000,8*coreid which is
+ * CVMX_CIU_WDOGX(coreid) - 0x0500
+ *
+ * Now ld K0, CVMX_CIU_WDOGX(coreid)
+ */
+ uasm_i_ld(&p, K0, 0x500, K0);
+ /*
+ * If bit one set handle the NMI as a watchdog event.
+ * otherwise transfer control to bootloader.
+ */
+ uasm_il_bbit0(&p, &r, K0, 1, label_enter_bootloader);
+ uasm_i_nop(&p);
+ }
#endif
/* Clear Dcache so cvmseg works right. */
@@ -194,11 +198,13 @@
uasm_i_dmfc0(&p, K0, C0_DESAVE);
#ifdef CONFIG_HOTPLUG_CPU
- uasm_build_label(&l, p, label_enter_bootloader);
- /* Jump to the bootloader and restore K0 */
- UASM_i_LA(&p, K0, (long)octeon_bootloader_entry_addr);
- uasm_i_jr(&p, K0);
- uasm_i_dmfc0(&p, K0, C0_DESAVE);
+ if (octeon_bootloader_entry_addr) {
+ uasm_build_label(&l, p, label_enter_bootloader);
+ /* Jump to the bootloader and restore K0 */
+ UASM_i_LA(&p, K0, (long)octeon_bootloader_entry_addr);
+ uasm_i_jr(&p, K0);
+ uasm_i_dmfc0(&p, K0, C0_DESAVE);
+ }
#endif
uasm_resolve_relocs(relocs, labels);
diff --git a/sound/soc/au1x/psc-ac97.c b/sound/soc/au1x/psc-ac97.c
index 986dcec..84f31e1 100644
--- a/sound/soc/au1x/psc-ac97.c
+++ b/sound/soc/au1x/psc-ac97.c
@@ -79,28 +79,28 @@
unsigned short retry, tmo;
unsigned long data;
- au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
- au_sync();
+ __raw_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
+ wmb(); /* drain writebuffer */
retry = AC97_RW_RETRIES;
do {
mutex_lock(&pscdata->lock);
- au_writel(PSC_AC97CDC_RD | PSC_AC97CDC_INDX(reg),
+ __raw_writel(PSC_AC97CDC_RD | PSC_AC97CDC_INDX(reg),
AC97_CDC(pscdata));
- au_sync();
+ wmb(); /* drain writebuffer */
tmo = 20;
do {
udelay(21);
- if (au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)
+ if (__raw_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)
break;
} while (--tmo);
- data = au_readl(AC97_CDC(pscdata));
+ data = __raw_readl(AC97_CDC(pscdata));
- au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
- au_sync();
+ __raw_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
+ wmb(); /* drain writebuffer */
mutex_unlock(&pscdata->lock);
@@ -119,26 +119,26 @@
struct au1xpsc_audio_data *pscdata = ac97_to_pscdata(ac97);
unsigned int tmo, retry;
- au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
- au_sync();
+ __raw_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
+ wmb(); /* drain writebuffer */
retry = AC97_RW_RETRIES;
do {
mutex_lock(&pscdata->lock);
- au_writel(PSC_AC97CDC_INDX(reg) | (val & 0xffff),
+ __raw_writel(PSC_AC97CDC_INDX(reg) | (val & 0xffff),
AC97_CDC(pscdata));
- au_sync();
+ wmb(); /* drain writebuffer */
tmo = 20;
do {
udelay(21);
- if (au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)
+ if (__raw_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)
break;
} while (--tmo);
- au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
- au_sync();
+ __raw_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
+ wmb(); /* drain writebuffer */
mutex_unlock(&pscdata->lock);
} while (--retry && !tmo);
@@ -149,11 +149,11 @@
{
struct au1xpsc_audio_data *pscdata = ac97_to_pscdata(ac97);
- au_writel(PSC_AC97RST_SNC, AC97_RST(pscdata));
- au_sync();
+ __raw_writel(PSC_AC97RST_SNC, AC97_RST(pscdata));
+ wmb(); /* drain writebuffer */
msleep(10);
- au_writel(0, AC97_RST(pscdata));
- au_sync();
+ __raw_writel(0, AC97_RST(pscdata));
+ wmb(); /* drain writebuffer */
}
static void au1xpsc_ac97_cold_reset(struct snd_ac97 *ac97)
@@ -162,25 +162,25 @@
int i;
/* disable PSC during cold reset */
- au_writel(0, AC97_CFG(au1xpsc_ac97_workdata));
- au_sync();
- au_writel(PSC_CTRL_DISABLE, PSC_CTRL(pscdata));
- au_sync();
+ __raw_writel(0, AC97_CFG(au1xpsc_ac97_workdata));
+ wmb(); /* drain writebuffer */
+ __raw_writel(PSC_CTRL_DISABLE, PSC_CTRL(pscdata));
+ wmb(); /* drain writebuffer */
/* issue cold reset */
- au_writel(PSC_AC97RST_RST, AC97_RST(pscdata));
- au_sync();
+ __raw_writel(PSC_AC97RST_RST, AC97_RST(pscdata));
+ wmb(); /* drain writebuffer */
msleep(500);
- au_writel(0, AC97_RST(pscdata));
- au_sync();
+ __raw_writel(0, AC97_RST(pscdata));
+ wmb(); /* drain writebuffer */
/* enable PSC */
- au_writel(PSC_CTRL_ENABLE, PSC_CTRL(pscdata));
- au_sync();
+ __raw_writel(PSC_CTRL_ENABLE, PSC_CTRL(pscdata));
+ wmb(); /* drain writebuffer */
/* wait for PSC to indicate it's ready */
i = 1000;
- while (!((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_SR)) && (--i))
+ while (!((__raw_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_SR)) && (--i))
msleep(1);
if (i == 0) {
@@ -189,12 +189,12 @@
}
/* enable the ac97 function */
- au_writel(pscdata->cfg | PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
- au_sync();
+ __raw_writel(pscdata->cfg | PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
+ wmb(); /* drain writebuffer */
/* wait for AC97 core to become ready */
i = 1000;
- while (!((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)) && (--i))
+ while (!((__raw_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)) && (--i))
msleep(1);
if (i == 0)
printk(KERN_ERR "au1xpsc-ac97: AC97 ctrl not ready\n");
@@ -218,8 +218,8 @@
chans = params_channels(params);
- r = ro = au_readl(AC97_CFG(pscdata));
- stat = au_readl(AC97_STAT(pscdata));
+ r = ro = __raw_readl(AC97_CFG(pscdata));
+ stat = __raw_readl(AC97_STAT(pscdata));
/* already active? */
if (stat & (PSC_AC97STAT_TB | PSC_AC97STAT_RB)) {
@@ -252,28 +252,28 @@
mutex_lock(&pscdata->lock);
/* disable AC97 device controller first... */
- au_writel(r & ~PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
- au_sync();
+ __raw_writel(r & ~PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
+ wmb(); /* drain writebuffer */
/* ...wait for it... */
t = 100;
- while ((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR) && --t)
+ while ((__raw_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR) && --t)
msleep(1);
if (!t)
printk(KERN_ERR "PSC-AC97: can't disable!\n");
/* ...write config... */
- au_writel(r, AC97_CFG(pscdata));
- au_sync();
+ __raw_writel(r, AC97_CFG(pscdata));
+ wmb(); /* drain writebuffer */
/* ...enable the AC97 controller again... */
- au_writel(r | PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
- au_sync();
+ __raw_writel(r | PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
+ wmb(); /* drain writebuffer */
/* ...and wait for ready bit */
t = 100;
- while ((!(au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)) && --t)
+ while ((!(__raw_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)) && --t)
msleep(1);
if (!t)
@@ -300,21 +300,21 @@
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
- au_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
- au_sync();
- au_writel(AC97PCR_START(stype), AC97_PCR(pscdata));
- au_sync();
+ __raw_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
+ wmb(); /* drain writebuffer */
+ __raw_writel(AC97PCR_START(stype), AC97_PCR(pscdata));
+ wmb(); /* drain writebuffer */
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
- au_writel(AC97PCR_STOP(stype), AC97_PCR(pscdata));
- au_sync();
+ __raw_writel(AC97PCR_STOP(stype), AC97_PCR(pscdata));
+ wmb(); /* drain writebuffer */
- while (au_readl(AC97_STAT(pscdata)) & AC97STAT_BUSY(stype))
+ while (__raw_readl(AC97_STAT(pscdata)) & AC97STAT_BUSY(stype))
asm volatile ("nop");
- au_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
- au_sync();
+ __raw_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
+ wmb(); /* drain writebuffer */
break;
default:
@@ -398,13 +398,13 @@
PSC_AC97CFG_DE_ENABLE;
/* preserve PSC clock source set up by platform */
- sel = au_readl(PSC_SEL(wd)) & PSC_SEL_CLK_MASK;
- au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
- au_sync();
- au_writel(0, PSC_SEL(wd));
- au_sync();
- au_writel(PSC_SEL_PS_AC97MODE | sel, PSC_SEL(wd));
- au_sync();
+ sel = __raw_readl(PSC_SEL(wd)) & PSC_SEL_CLK_MASK;
+ __raw_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(0, PSC_SEL(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(PSC_SEL_PS_AC97MODE | sel, PSC_SEL(wd));
+ wmb(); /* drain writebuffer */
/* name the DAI like this device instance ("au1xpsc-ac97.PSCINDEX") */
memcpy(&wd->dai_drv, &au1xpsc_ac97_dai_template,
@@ -433,10 +433,10 @@
snd_soc_unregister_component(&pdev->dev);
/* disable PSC completely */
- au_writel(0, AC97_CFG(wd));
- au_sync();
- au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
- au_sync();
+ __raw_writel(0, AC97_CFG(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+ wmb(); /* drain writebuffer */
au1xpsc_ac97_workdata = NULL; /* MDEV */
@@ -449,12 +449,12 @@
struct au1xpsc_audio_data *wd = dev_get_drvdata(dev);
/* save interesting registers and disable PSC */
- wd->pm[0] = au_readl(PSC_SEL(wd));
+ wd->pm[0] = __raw_readl(PSC_SEL(wd));
- au_writel(0, AC97_CFG(wd));
- au_sync();
- au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
- au_sync();
+ __raw_writel(0, AC97_CFG(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+ wmb(); /* drain writebuffer */
return 0;
}
@@ -464,8 +464,8 @@
struct au1xpsc_audio_data *wd = dev_get_drvdata(dev);
/* restore PSC clock config */
- au_writel(wd->pm[0] | PSC_SEL_PS_AC97MODE, PSC_SEL(wd));
- au_sync();
+ __raw_writel(wd->pm[0] | PSC_SEL_PS_AC97MODE, PSC_SEL(wd));
+ wmb(); /* drain writebuffer */
/* after this point the ac97 core will cold-reset the codec.
* During cold-reset the PSC is reinitialized and the last
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index fe923a7..814beff 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -120,10 +120,10 @@
unsigned long stat;
/* check if the PSC is already streaming data */
- stat = au_readl(I2S_STAT(pscdata));
+ stat = __raw_readl(I2S_STAT(pscdata));
if (stat & (PSC_I2SSTAT_TB | PSC_I2SSTAT_RB)) {
/* reject parameters not currently set up in hardware */
- cfgbits = au_readl(I2S_CFG(pscdata));
+ cfgbits = __raw_readl(I2S_CFG(pscdata));
if ((PSC_I2SCFG_GET_LEN(cfgbits) != params->msbits) ||
(params_rate(params) != pscdata->rate))
return -EINVAL;
@@ -149,33 +149,33 @@
unsigned long tmo;
/* bring PSC out of sleep, and configure I2S unit */
- au_writel(PSC_CTRL_ENABLE, PSC_CTRL(pscdata));
- au_sync();
+ __raw_writel(PSC_CTRL_ENABLE, PSC_CTRL(pscdata));
+ wmb(); /* drain writebuffer */
tmo = 1000000;
- while (!(au_readl(I2S_STAT(pscdata)) & PSC_I2SSTAT_SR) && tmo)
+ while (!(__raw_readl(I2S_STAT(pscdata)) & PSC_I2SSTAT_SR) && tmo)
tmo--;
if (!tmo)
goto psc_err;
- au_writel(0, I2S_CFG(pscdata));
- au_sync();
- au_writel(pscdata->cfg | PSC_I2SCFG_DE_ENABLE, I2S_CFG(pscdata));
- au_sync();
+ __raw_writel(0, I2S_CFG(pscdata));
+ wmb(); /* drain writebuffer */
+ __raw_writel(pscdata->cfg | PSC_I2SCFG_DE_ENABLE, I2S_CFG(pscdata));
+ wmb(); /* drain writebuffer */
/* wait for I2S controller to become ready */
tmo = 1000000;
- while (!(au_readl(I2S_STAT(pscdata)) & PSC_I2SSTAT_DR) && tmo)
+ while (!(__raw_readl(I2S_STAT(pscdata)) & PSC_I2SSTAT_DR) && tmo)
tmo--;
if (tmo)
return 0;
psc_err:
- au_writel(0, I2S_CFG(pscdata));
- au_writel(PSC_CTRL_SUSPEND, PSC_CTRL(pscdata));
- au_sync();
+ __raw_writel(0, I2S_CFG(pscdata));
+ __raw_writel(PSC_CTRL_SUSPEND, PSC_CTRL(pscdata));
+ wmb(); /* drain writebuffer */
return -ETIMEDOUT;
}
@@ -187,26 +187,26 @@
ret = 0;
/* if both TX and RX are idle, configure the PSC */
- stat = au_readl(I2S_STAT(pscdata));
+ stat = __raw_readl(I2S_STAT(pscdata));
if (!(stat & (PSC_I2SSTAT_TB | PSC_I2SSTAT_RB))) {
ret = au1xpsc_i2s_configure(pscdata);
if (ret)
goto out;
}
- au_writel(I2SPCR_CLRFIFO(stype), I2S_PCR(pscdata));
- au_sync();
- au_writel(I2SPCR_START(stype), I2S_PCR(pscdata));
- au_sync();
+ __raw_writel(I2SPCR_CLRFIFO(stype), I2S_PCR(pscdata));
+ wmb(); /* drain writebuffer */
+ __raw_writel(I2SPCR_START(stype), I2S_PCR(pscdata));
+ wmb(); /* drain writebuffer */
/* wait for start confirmation */
tmo = 1000000;
- while (!(au_readl(I2S_STAT(pscdata)) & I2SSTAT_BUSY(stype)) && tmo)
+ while (!(__raw_readl(I2S_STAT(pscdata)) & I2SSTAT_BUSY(stype)) && tmo)
tmo--;
if (!tmo) {
- au_writel(I2SPCR_STOP(stype), I2S_PCR(pscdata));
- au_sync();
+ __raw_writel(I2SPCR_STOP(stype), I2S_PCR(pscdata));
+ wmb(); /* drain writebuffer */
ret = -ETIMEDOUT;
}
out:
@@ -217,21 +217,21 @@
{
unsigned long tmo, stat;
- au_writel(I2SPCR_STOP(stype), I2S_PCR(pscdata));
- au_sync();
+ __raw_writel(I2SPCR_STOP(stype), I2S_PCR(pscdata));
+ wmb(); /* drain writebuffer */
/* wait for stop confirmation */
tmo = 1000000;
- while ((au_readl(I2S_STAT(pscdata)) & I2SSTAT_BUSY(stype)) && tmo)
+ while ((__raw_readl(I2S_STAT(pscdata)) & I2SSTAT_BUSY(stype)) && tmo)
tmo--;
/* if both TX and RX are idle, disable PSC */
- stat = au_readl(I2S_STAT(pscdata));
+ stat = __raw_readl(I2S_STAT(pscdata));
if (!(stat & (PSC_I2SSTAT_TB | PSC_I2SSTAT_RB))) {
- au_writel(0, I2S_CFG(pscdata));
- au_sync();
- au_writel(PSC_CTRL_SUSPEND, PSC_CTRL(pscdata));
- au_sync();
+ __raw_writel(0, I2S_CFG(pscdata));
+ wmb(); /* drain writebuffer */
+ __raw_writel(PSC_CTRL_SUSPEND, PSC_CTRL(pscdata));
+ wmb(); /* drain writebuffer */
}
return 0;
}
@@ -332,12 +332,12 @@
/* preserve PSC clock source set up by platform (dev.platform_data
* is already occupied by soc layer)
*/
- sel = au_readl(PSC_SEL(wd)) & PSC_SEL_CLK_MASK;
- au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
- au_sync();
- au_writel(PSC_SEL_PS_I2SMODE | sel, PSC_SEL(wd));
- au_writel(0, I2S_CFG(wd));
- au_sync();
+ sel = __raw_readl(PSC_SEL(wd)) & PSC_SEL_CLK_MASK;
+ __raw_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(PSC_SEL_PS_I2SMODE | sel, PSC_SEL(wd));
+ __raw_writel(0, I2S_CFG(wd));
+ wmb(); /* drain writebuffer */
/* preconfigure: set max rx/tx fifo depths */
wd->cfg |= PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8;
@@ -364,10 +364,10 @@
snd_soc_unregister_component(&pdev->dev);
- au_writel(0, I2S_CFG(wd));
- au_sync();
- au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
- au_sync();
+ __raw_writel(0, I2S_CFG(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+ wmb(); /* drain writebuffer */
return 0;
}
@@ -378,12 +378,12 @@
struct au1xpsc_audio_data *wd = dev_get_drvdata(dev);
/* save interesting register and disable PSC */
- wd->pm[0] = au_readl(PSC_SEL(wd));
+ wd->pm[0] = __raw_readl(PSC_SEL(wd));
- au_writel(0, I2S_CFG(wd));
- au_sync();
- au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
- au_sync();
+ __raw_writel(0, I2S_CFG(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+ wmb(); /* drain writebuffer */
return 0;
}
@@ -393,12 +393,12 @@
struct au1xpsc_audio_data *wd = dev_get_drvdata(dev);
/* select I2S mode and PSC clock */
- au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
- au_sync();
- au_writel(0, PSC_SEL(wd));
- au_sync();
- au_writel(wd->pm[0], PSC_SEL(wd));
- au_sync();
+ __raw_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(0, PSC_SEL(wd));
+ wmb(); /* drain writebuffer */
+ __raw_writel(wd->pm[0], PSC_SEL(wd));
+ wmb(); /* drain writebuffer */
return 0;
}
diff --git a/sound/soc/au1x/psc.h b/sound/soc/au1x/psc.h
index b16b2e0..74dffeb 100644
--- a/sound/soc/au1x/psc.h
+++ b/sound/soc/au1x/psc.h
@@ -27,16 +27,16 @@
};
/* easy access macros */
-#define PSC_CTRL(x) ((unsigned long)((x)->mmio) + PSC_CTRL_OFFSET)
-#define PSC_SEL(x) ((unsigned long)((x)->mmio) + PSC_SEL_OFFSET)
-#define I2S_STAT(x) ((unsigned long)((x)->mmio) + PSC_I2SSTAT_OFFSET)
-#define I2S_CFG(x) ((unsigned long)((x)->mmio) + PSC_I2SCFG_OFFSET)
-#define I2S_PCR(x) ((unsigned long)((x)->mmio) + PSC_I2SPCR_OFFSET)
-#define AC97_CFG(x) ((unsigned long)((x)->mmio) + PSC_AC97CFG_OFFSET)
-#define AC97_CDC(x) ((unsigned long)((x)->mmio) + PSC_AC97CDC_OFFSET)
-#define AC97_EVNT(x) ((unsigned long)((x)->mmio) + PSC_AC97EVNT_OFFSET)
-#define AC97_PCR(x) ((unsigned long)((x)->mmio) + PSC_AC97PCR_OFFSET)
-#define AC97_RST(x) ((unsigned long)((x)->mmio) + PSC_AC97RST_OFFSET)
-#define AC97_STAT(x) ((unsigned long)((x)->mmio) + PSC_AC97STAT_OFFSET)
+#define PSC_CTRL(x) ((x)->mmio + PSC_CTRL_OFFSET)
+#define PSC_SEL(x) ((x)->mmio + PSC_SEL_OFFSET)
+#define I2S_STAT(x) ((x)->mmio + PSC_I2SSTAT_OFFSET)
+#define I2S_CFG(x) ((x)->mmio + PSC_I2SCFG_OFFSET)
+#define I2S_PCR(x) ((x)->mmio + PSC_I2SPCR_OFFSET)
+#define AC97_CFG(x) ((x)->mmio + PSC_AC97CFG_OFFSET)
+#define AC97_CDC(x) ((x)->mmio + PSC_AC97CDC_OFFSET)
+#define AC97_EVNT(x) ((x)->mmio + PSC_AC97EVNT_OFFSET)
+#define AC97_PCR(x) ((x)->mmio + PSC_AC97PCR_OFFSET)
+#define AC97_RST(x) ((x)->mmio + PSC_AC97RST_OFFSET)
+#define AC97_STAT(x) ((x)->mmio + PSC_AC97STAT_OFFSET)
#endif