drivers/rtc/rtc-x1205.c - kernel/msm-4.9 - Gitiles

 /*
  * An i2c driver for the Xicor/Intersil X1205 RTC
  * Copyright 2004 Karen Spearel
  * Copyright 2005 Alessandro Zummo
  *
  * please send all reports to:
  * 	Karen Spearel <kas111 at gmail dot com>
  *	Alessandro Zummo <a.zummo@towertech.it>
  *
  * based on a lot of other RTC drivers.
  *
  * Information and datasheet:
  * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/i2c.h>
 #include <linux/bcd.h>
 #include <linux/rtc.h>
 #include <linux/delay.h>

 #define DRV_VERSION "1.0.8"

 /* offsets into CCR area */

 #define CCR_SEC			0
 #define CCR_MIN			1
 #define CCR_HOUR		2
 #define CCR_MDAY		3
 #define CCR_MONTH		4
 #define CCR_YEAR		5
 #define CCR_WDAY		6
 #define CCR_Y2K			7

 #define X1205_REG_SR		0x3F	/* status register */
 #define X1205_REG_Y2K		0x37
 #define X1205_REG_DW		0x36
 #define X1205_REG_YR		0x35
 #define X1205_REG_MO		0x34
 #define X1205_REG_DT		0x33
 #define X1205_REG_HR		0x32
 #define X1205_REG_MN		0x31
 #define X1205_REG_SC		0x30
 #define X1205_REG_DTR		0x13
 #define X1205_REG_ATR		0x12
 #define X1205_REG_INT		0x11
 #define X1205_REG_0		0x10
 #define X1205_REG_Y2K1		0x0F
 #define X1205_REG_DWA1		0x0E
 #define X1205_REG_YRA1		0x0D
 #define X1205_REG_MOA1		0x0C
 #define X1205_REG_DTA1		0x0B
 #define X1205_REG_HRA1		0x0A
 #define X1205_REG_MNA1		0x09
 #define X1205_REG_SCA1		0x08
 #define X1205_REG_Y2K0		0x07
 #define X1205_REG_DWA0		0x06
 #define X1205_REG_YRA0		0x05
 #define X1205_REG_MOA0		0x04
 #define X1205_REG_DTA0		0x03
 #define X1205_REG_HRA0		0x02
 #define X1205_REG_MNA0		0x01
 #define X1205_REG_SCA0		0x00

 #define X1205_CCR_BASE		0x30	/* Base address of CCR */
 #define X1205_ALM0_BASE		0x00	/* Base address of ALARM0 */

 #define X1205_SR_RTCF		0x01	/* Clock failure */
 #define X1205_SR_WEL		0x02	/* Write Enable Latch */
 #define X1205_SR_RWEL		0x04	/* Register Write Enable */

 #define X1205_DTR_DTR0		0x01
 #define X1205_DTR_DTR1		0x02
 #define X1205_DTR_DTR2		0x04

 #define X1205_HR_MIL		0x80	/* Set in ccr.hour for 24 hr mode */

 static struct i2c_driver x1205_driver;

 /*
  * In the routines that deal directly with the x1205 hardware, we use
  * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
  * Epoch is initialized as 2000. Time is set to UTC.
  */
 static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
 				unsigned char reg_base)
 {
 	unsigned char dt_addr[2] = { 0, reg_base };

 	unsigned char buf[8];

 	struct i2c_msg msgs[] = {
 		{ client->addr, 0, 2, dt_addr },	/* setup read ptr */
 		{ client->addr, I2C_M_RD, 8, buf },	/* read date */
 	};

 	/* read date registers */
 	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
 		dev_err(&client->dev, "%s: read error\n", __func__);
 		return -EIO;
 	}

 	dev_dbg(&client->dev,
 		"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
 		"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
 		__func__,
 		buf[0], buf[1], buf[2], buf[3],
 		buf[4], buf[5], buf[6], buf[7]);

 	tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
 	tm->tm_min = BCD2BIN(buf[CCR_MIN]);
 	tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
 	tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
 	tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
 	tm->tm_year = BCD2BIN(buf[CCR_YEAR])
 			+ (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
 	tm->tm_wday = buf[CCR_WDAY];

 	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
 		"mday=%d, mon=%d, year=%d, wday=%d\n",
 		__func__,
 		tm->tm_sec, tm->tm_min, tm->tm_hour,
 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

 	return 0;
 }

 static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
 {
 	static unsigned char sr_addr[2] = { 0, X1205_REG_SR };

 	struct i2c_msg msgs[] = {
 		{ client->addr, 0, 2, sr_addr },	/* setup read ptr */
 		{ client->addr, I2C_M_RD, 1, sr },	/* read status */
 	};

 	/* read status register */
 	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
 		dev_err(&client->dev, "%s: read error\n", __func__);
 		return -EIO;
 	}

 	return 0;
 }

 static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
 				int datetoo, u8 reg_base)
 {
 	int i, xfer;
 	unsigned char buf[8];

 	static const unsigned char wel[3] = { 0, X1205_REG_SR,
 						X1205_SR_WEL };

 	static const unsigned char rwel[3] = { 0, X1205_REG_SR,
 						X1205_SR_WEL | X1205_SR_RWEL };

 	static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };

 	dev_dbg(&client->dev,
 		"%s: secs=%d, mins=%d, hours=%d\n",
 		__func__,
 		tm->tm_sec, tm->tm_min, tm->tm_hour);

 	buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
 	buf[CCR_MIN] = BIN2BCD(tm->tm_min);

 	/* set hour and 24hr bit */
 	buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;

 	/* should we also set the date? */
 	if (datetoo) {
 		dev_dbg(&client->dev,
 			"%s: mday=%d, mon=%d, year=%d, wday=%d\n",
 			__func__,
 			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

 		buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);

 		/* month, 1 - 12 */
 		buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);

 		/* year, since the rtc epoch*/
 		buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
 		buf[CCR_WDAY] = tm->tm_wday & 0x07;
 		buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
 	}

 	/* this sequence is required to unlock the chip */
 	if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
 		dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
 		return -EIO;
 	}

 	if ((xfer = i2c_master_send(client, rwel, 3)) != 3) {
 		dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
 		return -EIO;
 	}

 	/* write register's data */
 	for (i = 0; i < (datetoo ? 8 : 3); i++) {
 		unsigned char rdata[3] = { 0, reg_base + i, buf[i] };

 		xfer = i2c_master_send(client, rdata, 3);
 		if (xfer != 3) {
 			dev_err(&client->dev,
 				"%s: xfer=%d addr=%02x, data=%02x\n",
 				__func__,
 				 xfer, rdata[1], rdata[2]);
 			return -EIO;
 		}
 	};

 	/* disable further writes */
 	if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
 		dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
 		return -EIO;
 	}

 	return 0;
 }

 static int x1205_fix_osc(struct i2c_client *client)
 {
 	int err;
 	struct rtc_time tm;

 	tm.tm_hour = tm.tm_min = tm.tm_sec = 0;

 	if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
 		dev_err(&client->dev,
 			"unable to restart the oscillator\n");

 	return err;
 }

 static int x1205_get_dtrim(struct i2c_client *client, int *trim)
 {
 	unsigned char dtr;
 	static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };

 	struct i2c_msg msgs[] = {
 		{ client->addr, 0, 2, dtr_addr },	/* setup read ptr */
 		{ client->addr, I2C_M_RD, 1, &dtr }, 	/* read dtr */
 	};

 	/* read dtr register */
 	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
 		dev_err(&client->dev, "%s: read error\n", __func__);
 		return -EIO;
 	}

 	dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr);

 	*trim = 0;

 	if (dtr & X1205_DTR_DTR0)
 		*trim += 20;

 	if (dtr & X1205_DTR_DTR1)
 		*trim += 10;

 	if (dtr & X1205_DTR_DTR2)
 		*trim = -*trim;

 	return 0;
 }

 static int x1205_get_atrim(struct i2c_client *client, int *trim)
 {
 	s8 atr;
 	static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };

 	struct i2c_msg msgs[] = {
 		{ client->addr, 0, 2, atr_addr },	/* setup read ptr */
 		{ client->addr, I2C_M_RD, 1, &atr }, 	/* read atr */
 	};

 	/* read atr register */
 	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
 		dev_err(&client->dev, "%s: read error\n", __func__);
 		return -EIO;
 	}

 	dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr);

 	/* atr is a two's complement value on 6 bits,
 	 * perform sign extension. The formula is
 	 * Catr = (atr * 0.25pF) + 11.00pF.
 	 */
 	if (atr & 0x20)
 		atr |= 0xC0;

 	dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr);

 	*trim = (atr * 250) + 11000;

 	dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim);

 	return 0;
 }

 struct x1205_limit
 {
 	unsigned char reg, mask, min, max;
 };

 static int x1205_validate_client(struct i2c_client *client)
 {
 	int i, xfer;

 	/* Probe array. We will read the register at the specified
 	 * address and check if the given bits are zero.
 	 */
 	static const unsigned char probe_zero_pattern[] = {
 		/* register, mask */
 		X1205_REG_SR,	0x18,
 		X1205_REG_DTR,	0xF8,
 		X1205_REG_ATR,	0xC0,
 		X1205_REG_INT,	0x18,
 		X1205_REG_0,	0xFF,
 	};

 	static const struct x1205_limit probe_limits_pattern[] = {
 		/* register, mask, min, max */
 		{ X1205_REG_Y2K,	0xFF,	19,	20	},
 		{ X1205_REG_DW,		0xFF,	0,	6	},
 		{ X1205_REG_YR,		0xFF,	0,	99	},
 		{ X1205_REG_MO,		0xFF,	0,	12	},
 		{ X1205_REG_DT,		0xFF,	0,	31	},
 		{ X1205_REG_HR,		0x7F,	0,	23	},
 		{ X1205_REG_MN,		0xFF,	0,	59	},
 		{ X1205_REG_SC,		0xFF,	0,	59	},
 		{ X1205_REG_Y2K1,	0xFF,	19,	20	},
 		{ X1205_REG_Y2K0,	0xFF,	19,	20	},
 	};

 	/* check that registers have bits a 0 where expected */
 	for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
 		unsigned char buf;

 		unsigned char addr[2] = { 0, probe_zero_pattern[i] };

 		struct i2c_msg msgs[2] = {
 			{ client->addr, 0, 2, addr },
 			{ client->addr, I2C_M_RD, 1, &buf },
 		};

 		if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
 			dev_err(&client->dev,
 				"%s: could not read register %x\n",
 				__func__, probe_zero_pattern[i]);

 			return -EIO;
 		}

 		if ((buf & probe_zero_pattern[i+1]) != 0) {
 			dev_err(&client->dev,
 				"%s: register=%02x, zero pattern=%d, value=%x\n",
 				__func__, probe_zero_pattern[i], i, buf);

 			return -ENODEV;
 		}
 	}

 	/* check limits (only registers with bcd values) */
 	for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
 		unsigned char reg, value;

 		unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };

 		struct i2c_msg msgs[2] = {
 			{ client->addr, 0, 2, addr },
 			{ client->addr, I2C_M_RD, 1, &reg },
 		};

 		if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
 			dev_err(&client->dev,
 				"%s: could not read register %x\n",
 				__func__, probe_limits_pattern[i].reg);

 			return -EIO;
 		}

 		value = BCD2BIN(reg & probe_limits_pattern[i].mask);

 		if (value > probe_limits_pattern[i].max ||
 			value < probe_limits_pattern[i].min) {
 			dev_dbg(&client->dev,
 				"%s: register=%x, lim pattern=%d, value=%d\n",
 				__func__, probe_limits_pattern[i].reg,
 				i, value);

 			return -ENODEV;
 		}
 	}

 	return 0;
 }

 static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	return x1205_get_datetime(to_i2c_client(dev),
 		&alrm->time, X1205_ALM0_BASE);
 }

 static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	return x1205_set_datetime(to_i2c_client(dev),
 		&alrm->time, 1, X1205_ALM0_BASE);
 }

 static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	return x1205_get_datetime(to_i2c_client(dev),
 		tm, X1205_CCR_BASE);
 }

 static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	return x1205_set_datetime(to_i2c_client(dev),
 		tm, 1, X1205_CCR_BASE);
 }

 static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	int err, dtrim, atrim;

 	if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0)
 		seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);

 	if ((err = x1205_get_atrim(to_i2c_client(dev), &atrim)) == 0)
 		seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
 			atrim / 1000, atrim % 1000);
 	return 0;
 }

 static const struct rtc_class_ops x1205_rtc_ops = {
 	.proc		= x1205_rtc_proc,
 	.read_time	= x1205_rtc_read_time,
 	.set_time	= x1205_rtc_set_time,
 	.read_alarm	= x1205_rtc_read_alarm,
 	.set_alarm	= x1205_rtc_set_alarm,
 };

 static ssize_t x1205_sysfs_show_atrim(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	int err, atrim;

 	err = x1205_get_atrim(to_i2c_client(dev), &atrim);
 	if (err)
 		return err;

 	return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
 }
 static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);

 static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	int err, dtrim;

 	err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
 	if (err)
 		return err;

 	return sprintf(buf, "%d ppm\n", dtrim);
 }
 static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);

 static int x1205_sysfs_register(struct device *dev)
 {
 	int err;

 	err = device_create_file(dev, &dev_attr_atrim);
 	if (err)
 		return err;

 	err = device_create_file(dev, &dev_attr_dtrim);
 	if (err)
 		device_remove_file(dev, &dev_attr_atrim);

 	return err;
 }

 static void x1205_sysfs_unregister(struct device *dev)
 {
 	device_remove_file(dev, &dev_attr_atrim);
 	device_remove_file(dev, &dev_attr_dtrim);
 }


 static int x1205_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	int err = 0;
 	unsigned char sr;
 	struct rtc_device *rtc;

 	dev_dbg(&client->dev, "%s\n", __func__);

 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		return -ENODEV;

 	if (x1205_validate_client(client) < 0)
 		return -ENODEV;

 	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");

 	rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
 				&x1205_rtc_ops, THIS_MODULE);

 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);

 	i2c_set_clientdata(client, rtc);

 	/* Check for power failures and eventualy enable the osc */
 	if ((err = x1205_get_status(client, &sr)) == 0) {
 		if (sr & X1205_SR_RTCF) {
 			dev_err(&client->dev,
 				"power failure detected, "
 				"please set the clock\n");
 			udelay(50);
 			x1205_fix_osc(client);
 		}
 	}
 	else
 		dev_err(&client->dev, "couldn't read status\n");

 	err = x1205_sysfs_register(&client->dev);
 	if (err)
 		goto exit_devreg;

 	return 0;

 exit_devreg:
 	rtc_device_unregister(rtc);

 	return err;
 }

 static int x1205_remove(struct i2c_client *client)
 {
 	struct rtc_device *rtc = i2c_get_clientdata(client);

 	rtc_device_unregister(rtc);
 	x1205_sysfs_unregister(&client->dev);
 	return 0;
 }

 static const struct i2c_device_id x1205_id[] = {
 	{ "x1205", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, x1205_id);

 static struct i2c_driver x1205_driver = {
 	.driver		= {
 		.name	= "rtc-x1205",
 	},
 	.probe		= x1205_probe,
 	.remove		= x1205_remove,
 	.id_table	= x1205_id,
 };

 static int __init x1205_init(void)
 {
 	return i2c_add_driver(&x1205_driver);
 }

 static void __exit x1205_exit(void)
 {
 	i2c_del_driver(&x1205_driver);
 }

 MODULE_AUTHOR(
 	"Karen Spearel <kas111 at gmail dot com>, "
 	"Alessandro Zummo <a.zummo@towertech.it>");
 MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);

 module_init(x1205_init);
 module_exit(x1205_exit);
	/*
	* An i2c driver for the Xicor/Intersil X1205 RTC
	* Copyright 2004 Karen Spearel
	* Copyright 2005 Alessandro Zummo
	*
	* please send all reports to:
	* Karen Spearel <kas111 at gmail dot com>
	* Alessandro Zummo <a.zummo@towertech.it>
	*
	* based on a lot of other RTC drivers.
	*
	* Information and datasheet:
	* http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/i2c.h>
	#include <linux/bcd.h>
	#include <linux/rtc.h>
	#include <linux/delay.h>

	#define DRV_VERSION "1.0.8"

	/* offsets into CCR area */

	#define CCR_SEC 0
	#define CCR_MIN 1
	#define CCR_HOUR 2
	#define CCR_MDAY 3
	#define CCR_MONTH 4
	#define CCR_YEAR 5
	#define CCR_WDAY 6
	#define CCR_Y2K 7

	#define X1205_REG_SR 0x3F /* status register */
	#define X1205_REG_Y2K 0x37
	#define X1205_REG_DW 0x36
	#define X1205_REG_YR 0x35
	#define X1205_REG_MO 0x34
	#define X1205_REG_DT 0x33
	#define X1205_REG_HR 0x32
	#define X1205_REG_MN 0x31
	#define X1205_REG_SC 0x30
	#define X1205_REG_DTR 0x13
	#define X1205_REG_ATR 0x12
	#define X1205_REG_INT 0x11
	#define X1205_REG_0 0x10
	#define X1205_REG_Y2K1 0x0F
	#define X1205_REG_DWA1 0x0E
	#define X1205_REG_YRA1 0x0D
	#define X1205_REG_MOA1 0x0C
	#define X1205_REG_DTA1 0x0B
	#define X1205_REG_HRA1 0x0A
	#define X1205_REG_MNA1 0x09
	#define X1205_REG_SCA1 0x08
	#define X1205_REG_Y2K0 0x07
	#define X1205_REG_DWA0 0x06
	#define X1205_REG_YRA0 0x05
	#define X1205_REG_MOA0 0x04
	#define X1205_REG_DTA0 0x03
	#define X1205_REG_HRA0 0x02
	#define X1205_REG_MNA0 0x01
	#define X1205_REG_SCA0 0x00

	#define X1205_CCR_BASE 0x30 /* Base address of CCR */
	#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */

	#define X1205_SR_RTCF 0x01 /* Clock failure */
	#define X1205_SR_WEL 0x02 /* Write Enable Latch */
	#define X1205_SR_RWEL 0x04 /* Register Write Enable */

	#define X1205_DTR_DTR0 0x01
	#define X1205_DTR_DTR1 0x02
	#define X1205_DTR_DTR2 0x04

	#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */

	static struct i2c_driver x1205_driver;

	/*
	* In the routines that deal directly with the x1205 hardware, we use
	* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
	* Epoch is initialized as 2000. Time is set to UTC.
	*/
	static int x1205_get_datetime(struct i2c_client client, struct rtc_time tm,
	unsigned char reg_base)
	{
	unsigned char dt_addr[2] = { 0, reg_base };

	unsigned char buf[8];

	struct i2c_msg msgs[] = {
	{ client->addr, 0, 2, dt_addr }, /* setup read ptr */
	{ client->addr, I2C_M_RD, 8, buf }, /* read date */
	};

	/* read date registers */
	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
	dev_err(&client->dev, "%s: read error\n", __func__);
	return -EIO;
	}

	dev_dbg(&client->dev,
	"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
	"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
	__func__,
	buf[0], buf[1], buf[2], buf[3],
	buf[4], buf[5], buf[6], buf[7]);

	tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
	tm->tm_min = BCD2BIN(buf[CCR_MIN]);
	tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
	tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
	tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
	tm->tm_year = BCD2BIN(buf[CCR_YEAR])
	+ (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
	tm->tm_wday = buf[CCR_WDAY];

	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
	"mday=%d, mon=%d, year=%d, wday=%d\n",
	__func__,
	tm->tm_sec, tm->tm_min, tm->tm_hour,
	tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

	return 0;
	}

	static int x1205_get_status(struct i2c_client client, unsigned char sr)
	{
	static unsigned char sr_addr[2] = { 0, X1205_REG_SR };

	struct i2c_msg msgs[] = {
	{ client->addr, 0, 2, sr_addr }, /* setup read ptr */
	{ client->addr, I2C_M_RD, 1, sr }, /* read status */
	};

	/* read status register */
	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
	dev_err(&client->dev, "%s: read error\n", __func__);
	return -EIO;
	}

	return 0;
	}

	static int x1205_set_datetime(struct i2c_client client, struct rtc_time tm,
	int datetoo, u8 reg_base)
	{
	int i, xfer;
	unsigned char buf[8];

	static const unsigned char wel[3] = { 0, X1205_REG_SR,
	X1205_SR_WEL };

	static const unsigned char rwel[3] = { 0, X1205_REG_SR,
	X1205_SR_WEL \| X1205_SR_RWEL };

	static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };

	dev_dbg(&client->dev,
	"%s: secs=%d, mins=%d, hours=%d\n",
	__func__,
	tm->tm_sec, tm->tm_min, tm->tm_hour);

	buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
	buf[CCR_MIN] = BIN2BCD(tm->tm_min);

	/* set hour and 24hr bit */
	buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) \| X1205_HR_MIL;

	/* should we also set the date? */
	if (datetoo) {
	dev_dbg(&client->dev,
	"%s: mday=%d, mon=%d, year=%d, wday=%d\n",
	__func__,
	tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

	buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);

	/* month, 1 - 12 */
	buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);

	/* year, since the rtc epoch*/
	buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
	buf[CCR_WDAY] = tm->tm_wday & 0x07;
	buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
	}

	/* this sequence is required to unlock the chip */
	if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
	dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
	return -EIO;
	}

	if ((xfer = i2c_master_send(client, rwel, 3)) != 3) {
	dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
	return -EIO;
	}

	/* write register's data */
	for (i = 0; i < (datetoo ? 8 : 3); i++) {
	unsigned char rdata[3] = { 0, reg_base + i, buf[i] };

	xfer = i2c_master_send(client, rdata, 3);
	if (xfer != 3) {
	dev_err(&client->dev,
	"%s: xfer=%d addr=%02x, data=%02x\n",
	__func__,
	xfer, rdata[1], rdata[2]);
	return -EIO;
	}
	};

	/* disable further writes */
	if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
	dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
	return -EIO;
	}

	return 0;
	}

	static int x1205_fix_osc(struct i2c_client *client)
	{
	int err;
	struct rtc_time tm;

	tm.tm_hour = tm.tm_min = tm.tm_sec = 0;

	if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
	dev_err(&client->dev,
	"unable to restart the oscillator\n");

	return err;
	}

	static int x1205_get_dtrim(struct i2c_client client, int trim)
	{
	unsigned char dtr;
	static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };

	struct i2c_msg msgs[] = {
	{ client->addr, 0, 2, dtr_addr }, /* setup read ptr */
	{ client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
	};

	/* read dtr register */
	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
	dev_err(&client->dev, "%s: read error\n", __func__);
	return -EIO;
	}

	dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr);

	*trim = 0;

	if (dtr & X1205_DTR_DTR0)
	*trim += 20;

	if (dtr & X1205_DTR_DTR1)
	*trim += 10;

	if (dtr & X1205_DTR_DTR2)
	trim = -trim;

	return 0;
	}

	static int x1205_get_atrim(struct i2c_client client, int trim)
	{
	s8 atr;
	static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };

	struct i2c_msg msgs[] = {
	{ client->addr, 0, 2, atr_addr }, /* setup read ptr */
	{ client->addr, I2C_M_RD, 1, &atr }, /* read atr */
	};

	/* read atr register */
	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
	dev_err(&client->dev, "%s: read error\n", __func__);
	return -EIO;
	}

	dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr);

	/* atr is a two's complement value on 6 bits,
	* perform sign extension. The formula is
	* Catr = (atr * 0.25pF) + 11.00pF.
	*/
	if (atr & 0x20)
	atr \|= 0xC0;

	dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr);

	trim = (atr 250) + 11000;

	dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim);

	return 0;
	}

	struct x1205_limit
	{
	unsigned char reg, mask, min, max;
	};

	static int x1205_validate_client(struct i2c_client *client)
	{
	int i, xfer;

	/* Probe array. We will read the register at the specified
	* address and check if the given bits are zero.
	*/
	static const unsigned char probe_zero_pattern[] = {
	/* register, mask */
	X1205_REG_SR, 0x18,
	X1205_REG_DTR, 0xF8,
	X1205_REG_ATR, 0xC0,
	X1205_REG_INT, 0x18,
	X1205_REG_0, 0xFF,
	};

	static const struct x1205_limit probe_limits_pattern[] = {
	/* register, mask, min, max */
	{ X1205_REG_Y2K, 0xFF, 19, 20 },
	{ X1205_REG_DW, 0xFF, 0, 6 },
	{ X1205_REG_YR, 0xFF, 0, 99 },
	{ X1205_REG_MO, 0xFF, 0, 12 },
	{ X1205_REG_DT, 0xFF, 0, 31 },
	{ X1205_REG_HR, 0x7F, 0, 23 },
	{ X1205_REG_MN, 0xFF, 0, 59 },
	{ X1205_REG_SC, 0xFF, 0, 59 },
	{ X1205_REG_Y2K1, 0xFF, 19, 20 },
	{ X1205_REG_Y2K0, 0xFF, 19, 20 },
	};

	/* check that registers have bits a 0 where expected */
	for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
	unsigned char buf;

	unsigned char addr[2] = { 0, probe_zero_pattern[i] };

	struct i2c_msg msgs[2] = {
	{ client->addr, 0, 2, addr },
	{ client->addr, I2C_M_RD, 1, &buf },
	};

	if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
	dev_err(&client->dev,
	"%s: could not read register %x\n",
	__func__, probe_zero_pattern[i]);

	return -EIO;
	}

	if ((buf & probe_zero_pattern[i+1]) != 0) {
	dev_err(&client->dev,
	"%s: register=%02x, zero pattern=%d, value=%x\n",
	__func__, probe_zero_pattern[i], i, buf);

	return -ENODEV;
	}
	}

	/* check limits (only registers with bcd values) */
	for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
	unsigned char reg, value;

	unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };

	struct i2c_msg msgs[2] = {
	{ client->addr, 0, 2, addr },
	{ client->addr, I2C_M_RD, 1, &reg },
	};

	if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
	dev_err(&client->dev,
	"%s: could not read register %x\n",
	__func__, probe_limits_pattern[i].reg);

	return -EIO;
	}

	value = BCD2BIN(reg & probe_limits_pattern[i].mask);

	if (value > probe_limits_pattern[i].max \|\|
	value < probe_limits_pattern[i].min) {
	dev_dbg(&client->dev,
	"%s: register=%x, lim pattern=%d, value=%d\n",
	__func__, probe_limits_pattern[i].reg,
	i, value);

	return -ENODEV;
	}
	}

	return 0;
	}

	static int x1205_rtc_read_alarm(struct device dev, struct rtc_wkalrm alrm)
	{
	return x1205_get_datetime(to_i2c_client(dev),
	&alrm->time, X1205_ALM0_BASE);
	}

	static int x1205_rtc_set_alarm(struct device dev, struct rtc_wkalrm alrm)
	{
	return x1205_set_datetime(to_i2c_client(dev),
	&alrm->time, 1, X1205_ALM0_BASE);
	}

	static int x1205_rtc_read_time(struct device dev, struct rtc_time tm)
	{
	return x1205_get_datetime(to_i2c_client(dev),
	tm, X1205_CCR_BASE);
	}

	static int x1205_rtc_set_time(struct device dev, struct rtc_time tm)
	{
	return x1205_set_datetime(to_i2c_client(dev),
	tm, 1, X1205_CCR_BASE);
	}

	static int x1205_rtc_proc(struct device dev, struct seq_file seq)
	{
	int err, dtrim, atrim;

	if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0)
	seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);

	if ((err = x1205_get_atrim(to_i2c_client(dev), &atrim)) == 0)
	seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
	atrim / 1000, atrim % 1000);
	return 0;
	}

	static const struct rtc_class_ops x1205_rtc_ops = {
	.proc = x1205_rtc_proc,
	.read_time = x1205_rtc_read_time,
	.set_time = x1205_rtc_set_time,
	.read_alarm = x1205_rtc_read_alarm,
	.set_alarm = x1205_rtc_set_alarm,
	};

	static ssize_t x1205_sysfs_show_atrim(struct device *dev,
	struct device_attribute attr, char buf)
	{
	int err, atrim;

	err = x1205_get_atrim(to_i2c_client(dev), &atrim);
	if (err)
	return err;

	return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
	}
	static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);

	static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
	struct device_attribute attr, char buf)
	{
	int err, dtrim;

	err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
	if (err)
	return err;

	return sprintf(buf, "%d ppm\n", dtrim);
	}
	static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);

	static int x1205_sysfs_register(struct device *dev)
	{
	int err;

	err = device_create_file(dev, &dev_attr_atrim);
	if (err)
	return err;

	err = device_create_file(dev, &dev_attr_dtrim);
	if (err)
	device_remove_file(dev, &dev_attr_atrim);

	return err;
	}

	static void x1205_sysfs_unregister(struct device *dev)
	{
	device_remove_file(dev, &dev_attr_atrim);
	device_remove_file(dev, &dev_attr_dtrim);
	}


	static int x1205_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	int err = 0;
	unsigned char sr;
	struct rtc_device *rtc;

	dev_dbg(&client->dev, "%s\n", __func__);

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
	return -ENODEV;

	if (x1205_validate_client(client) < 0)
	return -ENODEV;

	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");

	rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
	&x1205_rtc_ops, THIS_MODULE);

	if (IS_ERR(rtc))
	return PTR_ERR(rtc);

	i2c_set_clientdata(client, rtc);

	/* Check for power failures and eventualy enable the osc */
	if ((err = x1205_get_status(client, &sr)) == 0) {
	if (sr & X1205_SR_RTCF) {
	dev_err(&client->dev,
	"power failure detected, "
	"please set the clock\n");
	udelay(50);
	x1205_fix_osc(client);
	}
	}
	else
	dev_err(&client->dev, "couldn't read status\n");

	err = x1205_sysfs_register(&client->dev);
	if (err)
	goto exit_devreg;

	return 0;

	exit_devreg:
	rtc_device_unregister(rtc);

	return err;
	}

	static int x1205_remove(struct i2c_client *client)
	{
	struct rtc_device *rtc = i2c_get_clientdata(client);

	rtc_device_unregister(rtc);
	x1205_sysfs_unregister(&client->dev);
	return 0;
	}

	static const struct i2c_device_id x1205_id[] = {
	{ "x1205", 0 },
	{ }
	};
	MODULE_DEVICE_TABLE(i2c, x1205_id);

	static struct i2c_driver x1205_driver = {
	.driver = {
	.name = "rtc-x1205",
	},
	.probe = x1205_probe,
	.remove = x1205_remove,
	.id_table = x1205_id,
	};

	static int __init x1205_init(void)
	{
	return i2c_add_driver(&x1205_driver);
	}

	static void __exit x1205_exit(void)
	{
	i2c_del_driver(&x1205_driver);
	}

	MODULE_AUTHOR(
	"Karen Spearel <kas111 at gmail dot com>, "
	"Alessandro Zummo <a.zummo@towertech.it>");
	MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
	MODULE_LICENSE("GPL");
	MODULE_VERSION(DRV_VERSION);

	module_init(x1205_init);
	module_exit(x1205_exit);