| /* Copyright (c) 2010-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/firmware.h> |
| #include <linux/io.h> |
| #include <linux/elf.h> |
| #include <linux/mutex.h> |
| #include <linux/memblock.h> |
| #include <linux/slab.h> |
| #include <linux/suspend.h> |
| #include <linux/rwsem.h> |
| #include <linux/sysfs.h> |
| #include <linux/workqueue.h> |
| #include <linux/jiffies.h> |
| #include <linux/err.h> |
| #include <linux/list.h> |
| #include <linux/list_sort.h> |
| #include <linux/idr.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_gpio.h> |
| #include <linux/of_address.h> |
| #include <linux/io.h> |
| #include <linux/dma-mapping.h> |
| #include <soc/qcom/ramdump.h> |
| #include <soc/qcom/subsystem_restart.h> |
| #include <soc/qcom/secure_buffer.h> |
| |
| #include <linux/uaccess.h> |
| #include <asm/setup.h> |
| |
| #include "peripheral-loader.h" |
| |
| #define pil_err(desc, fmt, ...) \ |
| dev_err(desc->dev, "%s: " fmt, desc->name, ##__VA_ARGS__) |
| #define pil_info(desc, fmt, ...) \ |
| dev_info(desc->dev, "%s: " fmt, desc->name, ##__VA_ARGS__) |
| |
| #if defined(CONFIG_ARM) |
| #define pil_memset_io(d, c, count) memset(d, c, count) |
| #else |
| #define pil_memset_io(d, c, count) memset_io(d, c, count) |
| #endif |
| |
| #define PIL_NUM_DESC 10 |
| static void __iomem *pil_info_base; |
| |
| /** |
| * proxy_timeout - Override for proxy vote timeouts |
| * -1: Use driver-specified timeout |
| * 0: Hold proxy votes until shutdown |
| * >0: Specify a custom timeout in ms |
| */ |
| static int proxy_timeout_ms = -1; |
| module_param(proxy_timeout_ms, int, 0644); |
| |
| static bool disable_timeouts; |
| /** |
| * struct pil_mdt - Representation of <name>.mdt file in memory |
| * @hdr: ELF32 header |
| * @phdr: ELF32 program headers |
| */ |
| struct pil_mdt { |
| struct elf32_hdr hdr; |
| struct elf32_phdr phdr[]; |
| }; |
| |
| /** |
| * struct pil_seg - memory map representing one segment |
| * @next: points to next seg mentor NULL if last segment |
| * @paddr: physical start address of segment |
| * @sz: size of segment |
| * @filesz: size of segment on disk |
| * @num: segment number |
| * @relocated: true if segment is relocated, false otherwise |
| * |
| * Loosely based on an elf program header. Contains all necessary information |
| * to load and initialize a segment of the image in memory. |
| */ |
| struct pil_seg { |
| phys_addr_t paddr; |
| unsigned long sz; |
| unsigned long filesz; |
| int num; |
| struct list_head list; |
| bool relocated; |
| }; |
| |
| /** |
| * struct pil_priv - Private state for a pil_desc |
| * @proxy: work item used to run the proxy unvoting routine |
| * @ws: wakeup source to prevent suspend during pil_boot |
| * @wname: name of @ws |
| * @desc: pointer to pil_desc this is private data for |
| * @seg: list of segments sorted by physical address |
| * @entry_addr: physical address where processor starts booting at |
| * @base_addr: smallest start address among all segments that are relocatable |
| * @region_start: address where relocatable region starts or lowest address |
| * for non-relocatable images |
| * @region_end: address where relocatable region ends or highest address for |
| * non-relocatable images |
| * @region: region allocated for relocatable images |
| * @unvoted_flag: flag to keep track if we have unvoted or not. |
| * |
| * This struct contains data for a pil_desc that should not be exposed outside |
| * of this file. This structure points to the descriptor and the descriptor |
| * points to this structure so that PIL drivers can't access the private |
| * data of a descriptor but this file can access both. |
| */ |
| struct pil_priv { |
| struct delayed_work proxy; |
| struct wakeup_source ws; |
| char wname[32]; |
| struct pil_desc *desc; |
| struct list_head segs; |
| phys_addr_t entry_addr; |
| phys_addr_t base_addr; |
| phys_addr_t region_start; |
| phys_addr_t region_end; |
| void *region; |
| struct pil_image_info __iomem *info; |
| int id; |
| int unvoted_flag; |
| size_t region_size; |
| }; |
| |
| /** |
| * pil_do_ramdump() - Ramdump an image |
| * @desc: descriptor from pil_desc_init() |
| * @ramdump_dev: ramdump device returned from create_ramdump_device() |
| * |
| * Calls the ramdump API with a list of segments generated from the addresses |
| * that the descriptor corresponds to. |
| */ |
| int pil_do_ramdump(struct pil_desc *desc, void *ramdump_dev) |
| { |
| struct pil_priv *priv = desc->priv; |
| struct pil_seg *seg; |
| int count = 0, ret; |
| struct ramdump_segment *ramdump_segs, *s; |
| |
| list_for_each_entry(seg, &priv->segs, list) |
| count++; |
| |
| ramdump_segs = kcalloc(count, sizeof(*ramdump_segs), GFP_KERNEL); |
| if (!ramdump_segs) |
| return -ENOMEM; |
| |
| if (desc->subsys_vmid > 0) |
| ret = pil_assign_mem_to_linux(desc, priv->region_start, |
| (priv->region_end - priv->region_start)); |
| |
| s = ramdump_segs; |
| list_for_each_entry(seg, &priv->segs, list) { |
| s->address = seg->paddr; |
| s->size = seg->sz; |
| s++; |
| } |
| |
| ret = do_elf_ramdump(ramdump_dev, ramdump_segs, count); |
| kfree(ramdump_segs); |
| |
| if (ret) |
| pil_err(desc, "%s: Ramdump collection failed for subsys %s rc:%d\n", |
| __func__, desc->name, ret); |
| |
| if (desc->subsys_vmid > 0) |
| ret = pil_assign_mem_to_subsys(desc, priv->region_start, |
| (priv->region_end - priv->region_start)); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pil_do_ramdump); |
| |
| int pil_assign_mem_to_subsys(struct pil_desc *desc, phys_addr_t addr, |
| size_t size) |
| { |
| int ret; |
| int srcVM[1] = {VMID_HLOS}; |
| int destVM[1] = {desc->subsys_vmid}; |
| int destVMperm[1] = {PERM_READ | PERM_WRITE}; |
| |
| ret = hyp_assign_phys(addr, size, srcVM, 1, destVM, destVMperm, 1); |
| if (ret) |
| pil_err(desc, "%s: failed for %pa address of size %zx - subsys VMid %d rc:%d\n", |
| __func__, &addr, size, desc->subsys_vmid, ret); |
| return ret; |
| } |
| EXPORT_SYMBOL(pil_assign_mem_to_subsys); |
| |
| int pil_assign_mem_to_linux(struct pil_desc *desc, phys_addr_t addr, |
| size_t size) |
| { |
| int ret; |
| int srcVM[1] = {desc->subsys_vmid}; |
| int destVM[1] = {VMID_HLOS}; |
| int destVMperm[1] = {PERM_READ | PERM_WRITE | PERM_EXEC}; |
| |
| ret = hyp_assign_phys(addr, size, srcVM, 1, destVM, destVMperm, 1); |
| if (ret) |
| panic("%s: failed for %pa address of size %zx - subsys VMid %d rc:%d\n", |
| __func__, &addr, size, desc->subsys_vmid, ret); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pil_assign_mem_to_linux); |
| |
| int pil_assign_mem_to_subsys_and_linux(struct pil_desc *desc, |
| phys_addr_t addr, size_t size) |
| { |
| int ret; |
| int srcVM[1] = {VMID_HLOS}; |
| int destVM[2] = {VMID_HLOS, desc->subsys_vmid}; |
| int destVMperm[2] = {PERM_READ | PERM_WRITE, PERM_READ | PERM_WRITE}; |
| |
| ret = hyp_assign_phys(addr, size, srcVM, 1, destVM, destVMperm, 2); |
| if (ret) |
| pil_err(desc, "%s: failed for %pa address of size %zx - subsys VMid %d rc:%d\n", |
| __func__, &addr, size, desc->subsys_vmid, ret); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pil_assign_mem_to_subsys_and_linux); |
| |
| int pil_reclaim_mem(struct pil_desc *desc, phys_addr_t addr, size_t size, |
| int VMid) |
| { |
| int ret; |
| int srcVM[2] = {VMID_HLOS, desc->subsys_vmid}; |
| int destVM[1] = {VMid}; |
| int destVMperm[1] = {PERM_READ | PERM_WRITE}; |
| |
| if (VMid == VMID_HLOS) |
| destVMperm[0] = PERM_READ | PERM_WRITE | PERM_EXEC; |
| |
| ret = hyp_assign_phys(addr, size, srcVM, 2, destVM, destVMperm, 1); |
| if (ret) |
| panic("%s: failed for %pa address of size %zx - subsys VMid %d. Fatal error.\n", |
| __func__, &addr, size, desc->subsys_vmid); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pil_reclaim_mem); |
| |
| /** |
| * pil_get_entry_addr() - Retrieve the entry address of a peripheral image |
| * @desc: descriptor from pil_desc_init() |
| * |
| * Returns the physical address where the image boots at or 0 if unknown. |
| */ |
| phys_addr_t pil_get_entry_addr(struct pil_desc *desc) |
| { |
| return desc->priv ? desc->priv->entry_addr : 0; |
| } |
| EXPORT_SYMBOL(pil_get_entry_addr); |
| |
| static void __pil_proxy_unvote(struct pil_priv *priv) |
| { |
| struct pil_desc *desc = priv->desc; |
| |
| desc->ops->proxy_unvote(desc); |
| notify_proxy_unvote(desc->dev); |
| __pm_relax(&priv->ws); |
| module_put(desc->owner); |
| |
| } |
| |
| static void pil_proxy_unvote_work(struct work_struct *work) |
| { |
| struct delayed_work *delayed = to_delayed_work(work); |
| struct pil_priv *priv = container_of(delayed, struct pil_priv, proxy); |
| |
| __pil_proxy_unvote(priv); |
| } |
| |
| static int pil_proxy_vote(struct pil_desc *desc) |
| { |
| int ret = 0; |
| struct pil_priv *priv = desc->priv; |
| |
| if (desc->ops->proxy_vote) { |
| __pm_stay_awake(&priv->ws); |
| ret = desc->ops->proxy_vote(desc); |
| if (ret) |
| __pm_relax(&priv->ws); |
| } |
| |
| if (desc->proxy_unvote_irq) |
| enable_irq(desc->proxy_unvote_irq); |
| notify_proxy_vote(desc->dev); |
| |
| return ret; |
| } |
| |
| static void pil_proxy_unvote(struct pil_desc *desc, int immediate) |
| { |
| struct pil_priv *priv = desc->priv; |
| unsigned long timeout; |
| |
| if (proxy_timeout_ms == 0 && !immediate) |
| return; |
| else if (proxy_timeout_ms > 0) |
| timeout = proxy_timeout_ms; |
| else |
| timeout = desc->proxy_timeout; |
| |
| if (desc->ops->proxy_unvote) { |
| if (WARN_ON(!try_module_get(desc->owner))) |
| return; |
| |
| if (immediate) |
| timeout = 0; |
| |
| if (!desc->proxy_unvote_irq || immediate) |
| schedule_delayed_work(&priv->proxy, |
| msecs_to_jiffies(timeout)); |
| } |
| } |
| |
| static irqreturn_t proxy_unvote_intr_handler(int irq, void *dev_id) |
| { |
| struct pil_desc *desc = dev_id; |
| struct pil_priv *priv = desc->priv; |
| |
| pil_info(desc, "Power/Clock ready interrupt received\n"); |
| if (!desc->priv->unvoted_flag) { |
| desc->priv->unvoted_flag = 1; |
| __pil_proxy_unvote(priv); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static bool segment_is_relocatable(const struct elf32_phdr *p) |
| { |
| return !!(p->p_flags & BIT(27)); |
| } |
| |
| static phys_addr_t pil_reloc(const struct pil_priv *priv, phys_addr_t addr) |
| { |
| return addr - priv->base_addr + priv->region_start; |
| } |
| |
| static struct pil_seg *pil_init_seg(const struct pil_desc *desc, |
| const struct elf32_phdr *phdr, int num) |
| { |
| bool reloc = segment_is_relocatable(phdr); |
| const struct pil_priv *priv = desc->priv; |
| struct pil_seg *seg; |
| |
| if (!reloc && memblock_overlaps_memory(phdr->p_paddr, phdr->p_memsz)) { |
| pil_err(desc, "Segment not relocatable,kernel memory would be overwritten[%#08lx, %#08lx)\n", |
| (unsigned long)phdr->p_paddr, |
| (unsigned long)(phdr->p_paddr + phdr->p_memsz)); |
| return ERR_PTR(-EPERM); |
| } |
| |
| if (phdr->p_filesz > phdr->p_memsz) { |
| pil_err(desc, "Segment %d: file size (%u) is greater than mem size (%u).\n", |
| num, phdr->p_filesz, phdr->p_memsz); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| seg = kmalloc(sizeof(*seg), GFP_KERNEL); |
| if (!seg) |
| return ERR_PTR(-ENOMEM); |
| seg->num = num; |
| seg->paddr = reloc ? pil_reloc(priv, phdr->p_paddr) : phdr->p_paddr; |
| seg->filesz = phdr->p_filesz; |
| seg->sz = phdr->p_memsz; |
| seg->relocated = reloc; |
| INIT_LIST_HEAD(&seg->list); |
| |
| return seg; |
| } |
| |
| #define segment_is_hash(flag) (((flag) & (0x7 << 24)) == (0x2 << 24)) |
| |
| static int segment_is_loadable(const struct elf32_phdr *p) |
| { |
| return (p->p_type == PT_LOAD) && !segment_is_hash(p->p_flags) && |
| p->p_memsz; |
| } |
| |
| static void pil_dump_segs(const struct pil_priv *priv) |
| { |
| struct pil_seg *seg; |
| phys_addr_t seg_h_paddr; |
| |
| list_for_each_entry(seg, &priv->segs, list) { |
| seg_h_paddr = seg->paddr + seg->sz; |
| pil_info(priv->desc, "%d: %pa %pa\n", seg->num, |
| &seg->paddr, &seg_h_paddr); |
| } |
| } |
| |
| /* |
| * Ensure the entry address lies within the image limits and if the image is |
| * relocatable ensure it lies within a relocatable segment. |
| */ |
| static int pil_init_entry_addr(struct pil_priv *priv, const struct pil_mdt *mdt) |
| { |
| struct pil_seg *seg; |
| phys_addr_t entry = mdt->hdr.e_entry; |
| bool image_relocated = priv->region; |
| |
| if (image_relocated) |
| entry = pil_reloc(priv, entry); |
| priv->entry_addr = entry; |
| |
| if (priv->desc->flags & PIL_SKIP_ENTRY_CHECK) |
| return 0; |
| |
| list_for_each_entry(seg, &priv->segs, list) { |
| if (entry >= seg->paddr && entry < seg->paddr + seg->sz) { |
| if (!image_relocated) |
| return 0; |
| else if (seg->relocated) |
| return 0; |
| } |
| } |
| pil_err(priv->desc, "entry address %pa not within range\n", &entry); |
| pil_dump_segs(priv); |
| return -EADDRNOTAVAIL; |
| } |
| |
| static int pil_alloc_region(struct pil_priv *priv, phys_addr_t min_addr, |
| phys_addr_t max_addr, size_t align) |
| { |
| void *region; |
| size_t size = max_addr - min_addr; |
| size_t aligned_size; |
| |
| /* Don't reallocate due to fragmentation concerns, just sanity check */ |
| if (priv->region) { |
| if (WARN(priv->region_end - priv->region_start < size, |
| "Can't reuse PIL memory, too small\n")) |
| return -ENOMEM; |
| return 0; |
| } |
| |
| if (align > SZ_4M) |
| aligned_size = ALIGN(size, SZ_4M); |
| else |
| aligned_size = ALIGN(size, SZ_1M); |
| |
| priv->desc->attrs = 0; |
| priv->desc->attrs |= DMA_ATTR_SKIP_ZEROING | DMA_ATTR_NO_KERNEL_MAPPING; |
| |
| region = dma_alloc_attrs(priv->desc->dev, aligned_size, |
| &priv->region_start, GFP_KERNEL, |
| priv->desc->attrs); |
| |
| if (region == NULL) { |
| pil_err(priv->desc, "Failed to allocate relocatable region of size %zx\n", |
| size); |
| return -ENOMEM; |
| } |
| |
| priv->region = region; |
| priv->region_end = priv->region_start + size; |
| priv->base_addr = min_addr; |
| priv->region_size = aligned_size; |
| |
| return 0; |
| } |
| |
| static int pil_setup_region(struct pil_priv *priv, const struct pil_mdt *mdt) |
| { |
| const struct elf32_phdr *phdr; |
| phys_addr_t min_addr_r, min_addr_n, max_addr_r, max_addr_n, start, end; |
| size_t align = 0; |
| int i, ret = 0; |
| bool relocatable = false; |
| |
| min_addr_n = min_addr_r = (phys_addr_t)ULLONG_MAX; |
| max_addr_n = max_addr_r = 0; |
| |
| /* Find the image limits */ |
| for (i = 0; i < mdt->hdr.e_phnum; i++) { |
| phdr = &mdt->phdr[i]; |
| if (!segment_is_loadable(phdr)) |
| continue; |
| |
| start = phdr->p_paddr; |
| end = start + phdr->p_memsz; |
| |
| if (segment_is_relocatable(phdr)) { |
| min_addr_r = min(min_addr_r, start); |
| max_addr_r = max(max_addr_r, end); |
| /* |
| * Lowest relocatable segment dictates alignment of |
| * relocatable region |
| */ |
| if (min_addr_r == start) |
| align = phdr->p_align; |
| relocatable = true; |
| } else { |
| min_addr_n = min(min_addr_n, start); |
| max_addr_n = max(max_addr_n, end); |
| } |
| |
| } |
| |
| /* |
| * Align the max address to the next 4K boundary to satisfy iommus and |
| * XPUs that operate on 4K chunks. |
| */ |
| max_addr_n = ALIGN(max_addr_n, SZ_4K); |
| max_addr_r = ALIGN(max_addr_r, SZ_4K); |
| |
| if (relocatable) { |
| ret = pil_alloc_region(priv, min_addr_r, max_addr_r, align); |
| } else { |
| priv->region_start = min_addr_n; |
| priv->region_end = max_addr_n; |
| priv->base_addr = min_addr_n; |
| } |
| |
| if (priv->info) { |
| __iowrite32_copy(&priv->info->start, &priv->region_start, |
| sizeof(priv->region_start) / 4); |
| writel_relaxed(priv->region_end - priv->region_start, |
| &priv->info->size); |
| } |
| |
| return ret; |
| } |
| |
| static int pil_cmp_seg(void *priv, struct list_head *a, struct list_head *b) |
| { |
| int ret = 0; |
| struct pil_seg *seg_a = list_entry(a, struct pil_seg, list); |
| struct pil_seg *seg_b = list_entry(b, struct pil_seg, list); |
| |
| if (seg_a->paddr < seg_b->paddr) |
| ret = -1; |
| else if (seg_a->paddr > seg_b->paddr) |
| ret = 1; |
| |
| return ret; |
| } |
| |
| static int pil_init_mmap(struct pil_desc *desc, const struct pil_mdt *mdt) |
| { |
| struct pil_priv *priv = desc->priv; |
| const struct elf32_phdr *phdr; |
| struct pil_seg *seg; |
| int i, ret; |
| |
| ret = pil_setup_region(priv, mdt); |
| if (ret) |
| return ret; |
| |
| |
| pil_info(desc, "loading from %pa to %pa\n", &priv->region_start, |
| &priv->region_end); |
| |
| for (i = 0; i < mdt->hdr.e_phnum; i++) { |
| phdr = &mdt->phdr[i]; |
| if (!segment_is_loadable(phdr)) |
| continue; |
| |
| seg = pil_init_seg(desc, phdr, i); |
| if (IS_ERR(seg)) |
| return PTR_ERR(seg); |
| |
| list_add_tail(&seg->list, &priv->segs); |
| } |
| list_sort(NULL, &priv->segs, pil_cmp_seg); |
| |
| return pil_init_entry_addr(priv, mdt); |
| } |
| |
| struct pil_map_fw_info { |
| void *region; |
| unsigned long attrs; |
| phys_addr_t base_addr; |
| struct device *dev; |
| }; |
| |
| static void pil_release_mmap(struct pil_desc *desc) |
| { |
| struct pil_priv *priv = desc->priv; |
| struct pil_seg *p, *tmp; |
| u64 zero = 0ULL; |
| |
| if (priv->info) { |
| __iowrite32_copy(&priv->info->start, &zero, |
| sizeof(zero) / 4); |
| writel_relaxed(0, &priv->info->size); |
| } |
| |
| list_for_each_entry_safe(p, tmp, &priv->segs, list) { |
| list_del(&p->list); |
| kfree(p); |
| } |
| } |
| |
| static void pil_clear_segment(struct pil_desc *desc) |
| { |
| struct pil_priv *priv = desc->priv; |
| u8 __iomem *buf; |
| |
| struct pil_map_fw_info map_fw_info = { |
| .attrs = desc->attrs, |
| .region = priv->region, |
| .base_addr = priv->region_start, |
| .dev = desc->dev, |
| }; |
| |
| void *map_data = desc->map_data ? desc->map_data : &map_fw_info; |
| |
| /* Clear memory so that unauthorized ELF code is not left behind */ |
| buf = desc->map_fw_mem(priv->region_start, (priv->region_end - |
| priv->region_start), map_data); |
| pil_memset_io(buf, 0, (priv->region_end - priv->region_start)); |
| desc->unmap_fw_mem(buf, (priv->region_end - priv->region_start), |
| map_data); |
| |
| } |
| |
| #define IOMAP_SIZE SZ_1M |
| |
| static void *map_fw_mem(phys_addr_t paddr, size_t size, void *data) |
| { |
| struct pil_map_fw_info *info = data; |
| |
| return dma_remap(info->dev, info->region, paddr, size, |
| info->attrs); |
| } |
| |
| static void unmap_fw_mem(void *vaddr, size_t size, void *data) |
| { |
| struct pil_map_fw_info *info = data; |
| |
| dma_unremap(info->dev, vaddr, size); |
| } |
| |
| static int pil_load_seg(struct pil_desc *desc, struct pil_seg *seg) |
| { |
| int ret = 0, count; |
| phys_addr_t paddr; |
| char fw_name[30]; |
| int num = seg->num; |
| const struct firmware *fw = NULL; |
| void __iomem *firmware_buf; |
| struct pil_map_fw_info map_fw_info = { |
| .attrs = desc->attrs, |
| .region = desc->priv->region, |
| .base_addr = desc->priv->region_start, |
| .dev = desc->dev, |
| }; |
| void *map_data = desc->map_data ? desc->map_data : &map_fw_info; |
| |
| if (seg->filesz) { |
| snprintf(fw_name, ARRAY_SIZE(fw_name), "%s.b%02d", |
| desc->fw_name, num); |
| firmware_buf = desc->map_fw_mem(seg->paddr, seg->filesz, |
| map_data); |
| if (!firmware_buf) { |
| pil_err(desc, "Failed to map memory for firmware buffer\n"); |
| return -ENOMEM; |
| } |
| |
| ret = request_firmware_into_buf(&fw, fw_name, desc->dev, |
| firmware_buf, seg->filesz); |
| desc->unmap_fw_mem(firmware_buf, seg->filesz, map_data); |
| |
| if (ret) { |
| pil_err(desc, "Failed to locate blob %s or blob is too big(rc:%d)\n", |
| fw_name, ret); |
| return ret; |
| } |
| |
| if (fw->size != seg->filesz) { |
| pil_err(desc, "Blob size %u doesn't match %lu\n", |
| ret, seg->filesz); |
| return -EPERM; |
| } |
| } |
| |
| /* Zero out trailing memory */ |
| paddr = seg->paddr + seg->filesz; |
| count = seg->sz - seg->filesz; |
| while (count > 0) { |
| int size; |
| u8 __iomem *buf; |
| |
| size = min_t(size_t, IOMAP_SIZE, count); |
| buf = desc->map_fw_mem(paddr, size, map_data); |
| if (!buf) { |
| pil_err(desc, "Failed to map memory\n"); |
| return -ENOMEM; |
| } |
| pil_memset_io(buf, 0, size); |
| |
| desc->unmap_fw_mem(buf, size, map_data); |
| |
| count -= size; |
| paddr += size; |
| } |
| |
| if (desc->ops->verify_blob) { |
| ret = desc->ops->verify_blob(desc, seg->paddr, seg->sz); |
| if (ret) |
| pil_err(desc, "Blob%u failed verification(rc:%d)\n", |
| num, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int pil_parse_devicetree(struct pil_desc *desc) |
| { |
| struct device_node *ofnode = desc->dev->of_node; |
| int clk_ready = 0; |
| |
| if (!ofnode) |
| return -EINVAL; |
| |
| if (of_property_read_u32(ofnode, "qcom,mem-protect-id", |
| &desc->subsys_vmid)) |
| pr_debug("Unable to read the addr-protect-id for %s\n", |
| desc->name); |
| |
| if (desc->ops->proxy_unvote && of_find_property(ofnode, |
| "qcom,gpio-proxy-unvote", |
| NULL)) { |
| clk_ready = of_get_named_gpio(ofnode, |
| "qcom,gpio-proxy-unvote", 0); |
| |
| if (clk_ready < 0) { |
| dev_dbg(desc->dev, |
| "[%s]: Error getting proxy unvoting gpio\n", |
| desc->name); |
| return clk_ready; |
| } |
| |
| clk_ready = gpio_to_irq(clk_ready); |
| if (clk_ready < 0) { |
| dev_err(desc->dev, |
| "[%s]: Error getting proxy unvote IRQ\n", |
| desc->name); |
| return clk_ready; |
| } |
| } |
| desc->proxy_unvote_irq = clk_ready; |
| return 0; |
| } |
| |
| /* Synchronize request_firmware() with suspend */ |
| static DECLARE_RWSEM(pil_pm_rwsem); |
| |
| /** |
| * pil_boot() - Load a peripheral image into memory and boot it |
| * @desc: descriptor from pil_desc_init() |
| * |
| * Returns 0 on success or -ERROR on failure. |
| */ |
| int pil_boot(struct pil_desc *desc) |
| { |
| int ret; |
| char fw_name[30]; |
| const struct pil_mdt *mdt; |
| const struct elf32_hdr *ehdr; |
| struct pil_seg *seg; |
| const struct firmware *fw; |
| struct pil_priv *priv = desc->priv; |
| bool mem_protect = false; |
| bool hyp_assign = false; |
| |
| if (desc->shutdown_fail) |
| pil_err(desc, "Subsystem shutdown failed previously!\n"); |
| |
| /* Reinitialize for new image */ |
| pil_release_mmap(desc); |
| |
| down_read(&pil_pm_rwsem); |
| snprintf(fw_name, sizeof(fw_name), "%s.mdt", desc->fw_name); |
| ret = request_firmware(&fw, fw_name, desc->dev); |
| if (ret) { |
| pil_err(desc, "Failed to locate %s(rc:%d)\n", fw_name, ret); |
| goto out; |
| } |
| |
| if (fw->size < sizeof(*ehdr)) { |
| pil_err(desc, "Not big enough to be an elf header\n"); |
| ret = -EIO; |
| goto release_fw; |
| } |
| |
| mdt = (const struct pil_mdt *)fw->data; |
| ehdr = &mdt->hdr; |
| |
| if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) { |
| pil_err(desc, "Not an elf header\n"); |
| ret = -EIO; |
| goto release_fw; |
| } |
| |
| if (ehdr->e_phnum == 0) { |
| pil_err(desc, "No loadable segments\n"); |
| ret = -EIO; |
| goto release_fw; |
| } |
| if (sizeof(struct elf32_phdr) * ehdr->e_phnum + |
| sizeof(struct elf32_hdr) > fw->size) { |
| pil_err(desc, "Program headers not within mdt\n"); |
| ret = -EIO; |
| goto release_fw; |
| } |
| |
| ret = pil_init_mmap(desc, mdt); |
| if (ret) |
| goto release_fw; |
| |
| desc->priv->unvoted_flag = 0; |
| ret = pil_proxy_vote(desc); |
| if (ret) { |
| pil_err(desc, "Failed to proxy vote(rc:%d)\n", ret); |
| goto release_fw; |
| } |
| |
| if (desc->ops->init_image) |
| ret = desc->ops->init_image(desc, fw->data, fw->size); |
| if (ret) { |
| pil_err(desc, "Initializing image failed(rc:%d)\n", ret); |
| goto err_boot; |
| } |
| |
| if (desc->ops->mem_setup) |
| ret = desc->ops->mem_setup(desc, priv->region_start, |
| priv->region_end - priv->region_start); |
| if (ret) { |
| pil_err(desc, "Memory setup error(rc:%d)\n", ret); |
| goto err_deinit_image; |
| } |
| |
| if (desc->subsys_vmid > 0) { |
| /** |
| * In case of modem ssr, we need to assign memory back to linux. |
| * This is not true after cold boot since linux already owns it. |
| * Also for secure boot devices, modem memory has to be released |
| * after MBA is booted |
| */ |
| if (desc->modem_ssr) { |
| ret = pil_assign_mem_to_linux(desc, priv->region_start, |
| (priv->region_end - priv->region_start)); |
| if (ret) |
| pil_err(desc, "Failed to assign to linux, ret- %d\n", |
| ret); |
| } |
| ret = pil_assign_mem_to_subsys_and_linux(desc, |
| priv->region_start, |
| (priv->region_end - priv->region_start)); |
| if (ret) { |
| pil_err(desc, "Failed to assign memory, ret - %d\n", |
| ret); |
| goto err_deinit_image; |
| } |
| hyp_assign = true; |
| } |
| |
| list_for_each_entry(seg, &desc->priv->segs, list) { |
| ret = pil_load_seg(desc, seg); |
| if (ret) |
| goto err_deinit_image; |
| } |
| |
| if (desc->subsys_vmid > 0) { |
| ret = pil_reclaim_mem(desc, priv->region_start, |
| (priv->region_end - priv->region_start), |
| desc->subsys_vmid); |
| if (ret) { |
| pil_err(desc, "Failed to assign %s memory, ret - %d\n", |
| desc->name, ret); |
| goto err_deinit_image; |
| } |
| hyp_assign = false; |
| } |
| |
| ret = desc->ops->auth_and_reset(desc); |
| if (ret) { |
| pil_err(desc, "Failed to bring out of reset(rc:%d)\n", ret); |
| goto err_auth_and_reset; |
| } |
| pil_info(desc, "Brought out of reset\n"); |
| desc->modem_ssr = false; |
| err_auth_and_reset: |
| if (ret && desc->subsys_vmid > 0) { |
| pil_assign_mem_to_linux(desc, priv->region_start, |
| (priv->region_end - priv->region_start)); |
| mem_protect = true; |
| } |
| err_deinit_image: |
| if (ret && desc->ops->deinit_image) |
| desc->ops->deinit_image(desc); |
| err_boot: |
| if (ret && desc->proxy_unvote_irq) |
| disable_irq(desc->proxy_unvote_irq); |
| pil_proxy_unvote(desc, ret); |
| release_fw: |
| release_firmware(fw); |
| out: |
| up_read(&pil_pm_rwsem); |
| if (ret) { |
| if (priv->region) { |
| if (desc->subsys_vmid > 0 && !mem_protect && |
| hyp_assign) { |
| pil_reclaim_mem(desc, priv->region_start, |
| (priv->region_end - |
| priv->region_start), |
| VMID_HLOS); |
| } |
| dma_free_attrs(desc->dev, priv->region_size, |
| priv->region, priv->region_start, |
| desc->attrs); |
| priv->region = NULL; |
| } |
| if (desc->clear_fw_region && priv->region_start) |
| pil_clear_segment(desc); |
| pil_release_mmap(desc); |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL(pil_boot); |
| |
| /** |
| * pil_shutdown() - Shutdown a peripheral |
| * @desc: descriptor from pil_desc_init() |
| */ |
| void pil_shutdown(struct pil_desc *desc) |
| { |
| struct pil_priv *priv = desc->priv; |
| |
| if (desc->ops->shutdown) { |
| if (desc->ops->shutdown(desc)) |
| desc->shutdown_fail = true; |
| else |
| desc->shutdown_fail = false; |
| } |
| |
| if (desc->proxy_unvote_irq) { |
| disable_irq(desc->proxy_unvote_irq); |
| if (!desc->priv->unvoted_flag) |
| pil_proxy_unvote(desc, 1); |
| } else if (!proxy_timeout_ms) |
| pil_proxy_unvote(desc, 1); |
| else |
| flush_delayed_work(&priv->proxy); |
| desc->modem_ssr = true; |
| } |
| EXPORT_SYMBOL(pil_shutdown); |
| |
| /** |
| * pil_free_memory() - Free memory resources associated with a peripheral |
| * @desc: descriptor from pil_desc_init() |
| */ |
| void pil_free_memory(struct pil_desc *desc) |
| { |
| struct pil_priv *priv = desc->priv; |
| |
| if (priv->region) { |
| if (desc->subsys_vmid > 0) |
| pil_assign_mem_to_linux(desc, priv->region_start, |
| (priv->region_end - priv->region_start)); |
| dma_free_attrs(desc->dev, priv->region_size, |
| priv->region, priv->region_start, desc->attrs); |
| priv->region = NULL; |
| } |
| } |
| EXPORT_SYMBOL(pil_free_memory); |
| |
| static DEFINE_IDA(pil_ida); |
| |
| bool is_timeout_disabled(void) |
| { |
| return disable_timeouts; |
| } |
| /** |
| * pil_desc_init() - Initialize a pil descriptor |
| * @desc: descriptor to initialize |
| * |
| * Initialize a pil descriptor for use by other pil functions. This function |
| * must be called before calling pil_boot() or pil_shutdown(). |
| * |
| * Returns 0 for success and -ERROR on failure. |
| */ |
| int pil_desc_init(struct pil_desc *desc) |
| { |
| struct pil_priv *priv; |
| int ret; |
| void __iomem *addr; |
| char buf[sizeof(priv->info->name)]; |
| |
| if (WARN(desc->ops->proxy_unvote && !desc->ops->proxy_vote, |
| "Invalid proxy voting. Ignoring\n")) |
| ((struct pil_reset_ops *)desc->ops)->proxy_unvote = NULL; |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| desc->priv = priv; |
| priv->desc = desc; |
| |
| priv->id = ret = ida_simple_get(&pil_ida, 0, PIL_NUM_DESC, GFP_KERNEL); |
| if (priv->id < 0) |
| goto err; |
| |
| if (pil_info_base) { |
| addr = pil_info_base + sizeof(struct pil_image_info) * priv->id; |
| priv->info = (struct pil_image_info __iomem *)addr; |
| |
| strlcpy(buf, desc->name, sizeof(buf)); |
| __iowrite32_copy(priv->info->name, buf, sizeof(buf) / 4); |
| } |
| |
| ret = pil_parse_devicetree(desc); |
| if (ret) |
| goto err_parse_dt; |
| |
| /* Ignore users who don't make any sense */ |
| WARN(desc->ops->proxy_unvote && desc->proxy_unvote_irq == 0 |
| && !desc->proxy_timeout, |
| "Invalid proxy unvote callback or a proxy timeout of 0 was specified or no proxy unvote IRQ was specified.\n"); |
| |
| if (desc->proxy_unvote_irq) { |
| ret = request_threaded_irq(desc->proxy_unvote_irq, |
| NULL, |
| proxy_unvote_intr_handler, |
| IRQF_ONESHOT | IRQF_TRIGGER_RISING, |
| desc->name, desc); |
| if (ret < 0) { |
| dev_err(desc->dev, |
| "Unable to request proxy unvote IRQ: %d\n", |
| ret); |
| goto err; |
| } |
| disable_irq(desc->proxy_unvote_irq); |
| } |
| |
| snprintf(priv->wname, sizeof(priv->wname), "pil-%s", desc->name); |
| wakeup_source_init(&priv->ws, priv->wname); |
| INIT_DELAYED_WORK(&priv->proxy, pil_proxy_unvote_work); |
| INIT_LIST_HEAD(&priv->segs); |
| |
| /* Make sure mapping functions are set. */ |
| if (!desc->map_fw_mem) |
| desc->map_fw_mem = map_fw_mem; |
| |
| if (!desc->unmap_fw_mem) |
| desc->unmap_fw_mem = unmap_fw_mem; |
| |
| return 0; |
| err_parse_dt: |
| ida_simple_remove(&pil_ida, priv->id); |
| err: |
| kfree(priv); |
| return ret; |
| } |
| EXPORT_SYMBOL(pil_desc_init); |
| |
| /** |
| * pil_desc_release() - Release a pil descriptor |
| * @desc: descriptor to free |
| */ |
| void pil_desc_release(struct pil_desc *desc) |
| { |
| struct pil_priv *priv = desc->priv; |
| |
| if (priv) { |
| ida_simple_remove(&pil_ida, priv->id); |
| flush_delayed_work(&priv->proxy); |
| wakeup_source_trash(&priv->ws); |
| } |
| desc->priv = NULL; |
| kfree(priv); |
| } |
| EXPORT_SYMBOL(pil_desc_release); |
| |
| static int pil_pm_notify(struct notifier_block *b, unsigned long event, void *p) |
| { |
| switch (event) { |
| case PM_SUSPEND_PREPARE: |
| down_write(&pil_pm_rwsem); |
| break; |
| case PM_POST_SUSPEND: |
| up_write(&pil_pm_rwsem); |
| break; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block pil_pm_notifier = { |
| .notifier_call = pil_pm_notify, |
| }; |
| |
| static int __init msm_pil_init(void) |
| { |
| struct device_node *np; |
| struct resource res; |
| int i; |
| |
| np = of_find_compatible_node(NULL, NULL, "qcom,msm-imem-pil"); |
| if (!np) { |
| pr_warn("pil: failed to find qcom,msm-imem-pil node\n"); |
| goto out; |
| } |
| if (of_address_to_resource(np, 0, &res)) { |
| pr_warn("pil: address to resource on imem region failed\n"); |
| goto out; |
| } |
| pil_info_base = ioremap(res.start, resource_size(&res)); |
| if (!pil_info_base) { |
| pr_warn("pil: could not map imem region\n"); |
| goto out; |
| } |
| if (__raw_readl(pil_info_base) == 0x53444247) { |
| pr_info("pil: pil-imem set to disable pil timeouts\n"); |
| disable_timeouts = true; |
| } |
| for (i = 0; i < resource_size(&res)/sizeof(u32); i++) |
| writel_relaxed(0, pil_info_base + (i * sizeof(u32))); |
| |
| out: |
| return register_pm_notifier(&pil_pm_notifier); |
| } |
| device_initcall(msm_pil_init); |
| |
| static void __exit msm_pil_exit(void) |
| { |
| unregister_pm_notifier(&pil_pm_notifier); |
| if (pil_info_base) |
| iounmap(pil_info_base); |
| } |
| module_exit(msm_pil_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Load peripheral images and bring peripherals out of reset"); |