| /* |
| * QLogic Fibre Channel HBA Driver |
| * Copyright (c) 2003-2008 QLogic Corporation |
| * |
| * See LICENSE.qla2xxx for copyright and licensing details. |
| */ |
| #include "qla_def.h" |
| |
| #include <linux/delay.h> |
| |
| |
| /* |
| * qla2x00_mailbox_command |
| * Issue mailbox command and waits for completion. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * mcp = driver internal mbx struct pointer. |
| * |
| * Output: |
| * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data. |
| * |
| * Returns: |
| * 0 : QLA_SUCCESS = cmd performed success |
| * 1 : QLA_FUNCTION_FAILED (error encountered) |
| * 6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered) |
| * |
| * Context: |
| * Kernel context. |
| */ |
| static int |
| qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) |
| { |
| int rval; |
| unsigned long flags = 0; |
| device_reg_t __iomem *reg; |
| uint8_t abort_active; |
| uint8_t io_lock_on; |
| uint16_t command; |
| uint16_t *iptr; |
| uint16_t __iomem *optr; |
| uint32_t cnt; |
| uint32_t mboxes; |
| unsigned long wait_time; |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| if (ha->pdev->error_state > pci_channel_io_frozen) |
| return QLA_FUNCTION_TIMEOUT; |
| |
| reg = ha->iobase; |
| io_lock_on = base_vha->flags.init_done; |
| |
| rval = QLA_SUCCESS; |
| abort_active = test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, base_vha->host_no)); |
| |
| /* |
| * Wait for active mailbox commands to finish by waiting at most tov |
| * seconds. This is to serialize actual issuing of mailbox cmds during |
| * non ISP abort time. |
| */ |
| if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) { |
| /* Timeout occurred. Return error. */ |
| DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " |
| "Exiting.\n", __func__, base_vha->host_no)); |
| return QLA_FUNCTION_TIMEOUT; |
| } |
| |
| ha->flags.mbox_busy = 1; |
| /* Save mailbox command for debug */ |
| ha->mcp = mcp; |
| |
| DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n", |
| base_vha->host_no, mcp->mb[0])); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Load mailbox registers. */ |
| if (IS_FWI2_CAPABLE(ha)) |
| optr = (uint16_t __iomem *)®->isp24.mailbox0; |
| else |
| optr = (uint16_t __iomem *)MAILBOX_REG(ha, ®->isp, 0); |
| |
| iptr = mcp->mb; |
| command = mcp->mb[0]; |
| mboxes = mcp->out_mb; |
| |
| for (cnt = 0; cnt < ha->mbx_count; cnt++) { |
| if (IS_QLA2200(ha) && cnt == 8) |
| optr = |
| (uint16_t __iomem *)MAILBOX_REG(ha, ®->isp, 8); |
| if (mboxes & BIT_0) |
| WRT_REG_WORD(optr, *iptr); |
| |
| mboxes >>= 1; |
| optr++; |
| iptr++; |
| } |
| |
| #if defined(QL_DEBUG_LEVEL_1) |
| printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n", |
| __func__, base_vha->host_no); |
| qla2x00_dump_buffer((uint8_t *)mcp->mb, 16); |
| printk("\n"); |
| qla2x00_dump_buffer(((uint8_t *)mcp->mb + 0x10), 16); |
| printk("\n"); |
| qla2x00_dump_buffer(((uint8_t *)mcp->mb + 0x20), 8); |
| printk("\n"); |
| printk("%s(%ld): I/O address = %p.\n", __func__, base_vha->host_no, |
| optr); |
| qla2x00_dump_regs(base_vha); |
| #endif |
| |
| /* Issue set host interrupt command to send cmd out. */ |
| ha->flags.mbox_int = 0; |
| clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); |
| |
| /* Unlock mbx registers and wait for interrupt */ |
| DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. " |
| "jiffies=%lx.\n", __func__, base_vha->host_no, jiffies)); |
| |
| /* Wait for mbx cmd completion until timeout */ |
| |
| if ((!abort_active && io_lock_on) || IS_NOPOLLING_TYPE(ha)) { |
| set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); |
| |
| if (IS_FWI2_CAPABLE(ha)) |
| WRT_REG_DWORD(®->isp24.hccr, HCCRX_SET_HOST_INT); |
| else |
| WRT_REG_WORD(®->isp.hccr, HCCR_SET_HOST_INT); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| wait_for_completion_timeout(&ha->mbx_intr_comp, mcp->tov * HZ); |
| |
| clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); |
| |
| } else { |
| DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__, |
| base_vha->host_no, command)); |
| |
| if (IS_FWI2_CAPABLE(ha)) |
| WRT_REG_DWORD(®->isp24.hccr, HCCRX_SET_HOST_INT); |
| else |
| WRT_REG_WORD(®->isp.hccr, HCCR_SET_HOST_INT); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| wait_time = jiffies + mcp->tov * HZ; /* wait at most tov secs */ |
| while (!ha->flags.mbox_int) { |
| if (time_after(jiffies, wait_time)) |
| break; |
| |
| /* Check for pending interrupts. */ |
| qla2x00_poll(ha->rsp_q_map[0]); |
| |
| if (command != MBC_LOAD_RISC_RAM_EXTENDED && |
| !ha->flags.mbox_int) |
| msleep(10); |
| } /* while */ |
| } |
| |
| /* Check whether we timed out */ |
| if (ha->flags.mbox_int) { |
| uint16_t *iptr2; |
| |
| DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__, |
| base_vha->host_no, command)); |
| |
| /* Got interrupt. Clear the flag. */ |
| ha->flags.mbox_int = 0; |
| clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); |
| |
| if (ha->mailbox_out[0] != MBS_COMMAND_COMPLETE) |
| rval = QLA_FUNCTION_FAILED; |
| |
| /* Load return mailbox registers. */ |
| iptr2 = mcp->mb; |
| iptr = (uint16_t *)&ha->mailbox_out[0]; |
| mboxes = mcp->in_mb; |
| for (cnt = 0; cnt < ha->mbx_count; cnt++) { |
| if (mboxes & BIT_0) |
| *iptr2 = *iptr; |
| |
| mboxes >>= 1; |
| iptr2++; |
| iptr++; |
| } |
| } else { |
| |
| #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \ |
| defined(QL_DEBUG_LEVEL_11) |
| uint16_t mb0; |
| uint32_t ictrl; |
| |
| if (IS_FWI2_CAPABLE(ha)) { |
| mb0 = RD_REG_WORD(®->isp24.mailbox0); |
| ictrl = RD_REG_DWORD(®->isp24.ictrl); |
| } else { |
| mb0 = RD_MAILBOX_REG(ha, ®->isp, 0); |
| ictrl = RD_REG_WORD(®->isp.ictrl); |
| } |
| printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n", |
| __func__, base_vha->host_no, command); |
| printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__, |
| base_vha->host_no, ictrl, jiffies); |
| printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__, |
| base_vha->host_no, mb0); |
| qla2x00_dump_regs(base_vha); |
| #endif |
| |
| rval = QLA_FUNCTION_TIMEOUT; |
| } |
| |
| ha->flags.mbox_busy = 0; |
| |
| /* Clean up */ |
| ha->mcp = NULL; |
| |
| if ((abort_active || !io_lock_on) && !IS_NOPOLLING_TYPE(ha)) { |
| DEBUG11(printk("%s(%ld): checking for additional resp " |
| "interrupt.\n", __func__, base_vha->host_no)); |
| |
| /* polling mode for non isp_abort commands. */ |
| qla2x00_poll(ha->rsp_q_map[0]); |
| } |
| |
| if (rval == QLA_FUNCTION_TIMEOUT && |
| mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) { |
| if (!io_lock_on || (mcp->flags & IOCTL_CMD)) { |
| /* not in dpc. schedule it for dpc to take over. */ |
| DEBUG(printk("%s(%ld): timeout schedule " |
| "isp_abort_needed.\n", __func__, |
| base_vha->host_no)); |
| DEBUG2_3_11(printk("%s(%ld): timeout schedule " |
| "isp_abort_needed.\n", __func__, |
| base_vha->host_no)); |
| qla_printk(KERN_WARNING, ha, |
| "Mailbox command timeout occurred. Scheduling ISP " |
| "abort.\n"); |
| set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); |
| qla2xxx_wake_dpc(vha); |
| } else if (!abort_active) { |
| /* call abort directly since we are in the DPC thread */ |
| DEBUG(printk("%s(%ld): timeout calling abort_isp\n", |
| __func__, base_vha->host_no)); |
| DEBUG2_3_11(printk("%s(%ld): timeout calling " |
| "abort_isp\n", __func__, base_vha->host_no)); |
| qla_printk(KERN_WARNING, ha, |
| "Mailbox command timeout occurred. Issuing ISP " |
| "abort.\n"); |
| |
| set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| clear_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); |
| if (qla2x00_abort_isp(base_vha)) { |
| /* Failed. retry later. */ |
| set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); |
| } |
| clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); |
| DEBUG(printk("%s(%ld): finished abort_isp\n", __func__, |
| base_vha->host_no)); |
| DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n", |
| __func__, base_vha->host_no)); |
| } |
| } |
| |
| /* Allow next mbx cmd to come in. */ |
| complete(&ha->mbx_cmd_comp); |
| |
| if (rval) { |
| DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " |
| "mbx2=%x, cmd=%x ****\n", __func__, base_vha->host_no, |
| mcp->mb[0], mcp->mb[1], mcp->mb[2], command)); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, |
| base_vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_load_ram(scsi_qla_host_t *vha, dma_addr_t req_dma, uint32_t risc_addr, |
| uint32_t risc_code_size) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| if (MSW(risc_addr) || IS_FWI2_CAPABLE(ha)) { |
| mcp->mb[0] = MBC_LOAD_RISC_RAM_EXTENDED; |
| mcp->mb[8] = MSW(risc_addr); |
| mcp->out_mb = MBX_8|MBX_0; |
| } else { |
| mcp->mb[0] = MBC_LOAD_RISC_RAM; |
| mcp->out_mb = MBX_0; |
| } |
| mcp->mb[1] = LSW(risc_addr); |
| mcp->mb[2] = MSW(req_dma); |
| mcp->mb[3] = LSW(req_dma); |
| mcp->mb[6] = MSW(MSD(req_dma)); |
| mcp->mb[7] = LSW(MSD(req_dma)); |
| mcp->out_mb |= MBX_7|MBX_6|MBX_3|MBX_2|MBX_1; |
| if (IS_FWI2_CAPABLE(ha)) { |
| mcp->mb[4] = MSW(risc_code_size); |
| mcp->mb[5] = LSW(risc_code_size); |
| mcp->out_mb |= MBX_5|MBX_4; |
| } else { |
| mcp->mb[4] = LSW(risc_code_size); |
| mcp->out_mb |= MBX_4; |
| } |
| |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_execute_fw |
| * Start adapter firmware. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_EXECUTE_FIRMWARE; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_0; |
| if (IS_FWI2_CAPABLE(ha)) { |
| mcp->mb[1] = MSW(risc_addr); |
| mcp->mb[2] = LSW(risc_addr); |
| mcp->mb[3] = 0; |
| mcp->mb[4] = 0; |
| mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1; |
| mcp->in_mb |= MBX_1; |
| } else { |
| mcp->mb[1] = LSW(risc_addr); |
| mcp->out_mb |= MBX_1; |
| if (IS_QLA2322(ha) || IS_QLA6322(ha)) { |
| mcp->mb[2] = 0; |
| mcp->out_mb |= MBX_2; |
| } |
| } |
| |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| if (IS_FWI2_CAPABLE(ha)) { |
| DEBUG11(printk("%s(%ld): done exchanges=%x.\n", |
| __func__, vha->host_no, mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, |
| vha->host_no)); |
| } |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_fw_version |
| * Get firmware version. |
| * |
| * Input: |
| * ha: adapter state pointer. |
| * major: pointer for major number. |
| * minor: pointer for minor number. |
| * subminor: pointer for subminor number. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor, |
| uint16_t *subminor, uint16_t *attributes, uint32_t *memory, uint8_t *mpi, |
| uint32_t *mpi_caps, uint8_t *phy) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_FIRMWARE_VERSION; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| if (IS_QLA81XX(vha->hw)) |
| mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8; |
| mcp->flags = 0; |
| mcp->tov = MBX_TOV_SECONDS; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) |
| goto failed; |
| |
| /* Return mailbox data. */ |
| *major = mcp->mb[1]; |
| *minor = mcp->mb[2]; |
| *subminor = mcp->mb[3]; |
| *attributes = mcp->mb[6]; |
| if (IS_QLA2100(vha->hw) || IS_QLA2200(vha->hw)) |
| *memory = 0x1FFFF; /* Defaults to 128KB. */ |
| else |
| *memory = (mcp->mb[5] << 16) | mcp->mb[4]; |
| if (IS_QLA81XX(vha->hw)) { |
| mpi[0] = mcp->mb[10] & 0xff; |
| mpi[1] = mcp->mb[11] >> 8; |
| mpi[2] = mcp->mb[11] & 0xff; |
| *mpi_caps = (mcp->mb[12] << 16) | mcp->mb[13]; |
| phy[0] = mcp->mb[8] & 0xff; |
| phy[1] = mcp->mb[9] >> 8; |
| phy[2] = mcp->mb[9] & 0xff; |
| } |
| failed: |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_fw_options |
| * Set firmware options. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * fwopt = pointer for firmware options. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_fw_options(scsi_qla_host_t *vha, uint16_t *fwopts) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_FIRMWARE_OPTION; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } else { |
| fwopts[0] = mcp->mb[0]; |
| fwopts[1] = mcp->mb[1]; |
| fwopts[2] = mcp->mb[2]; |
| fwopts[3] = mcp->mb[3]; |
| |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| |
| /* |
| * qla2x00_set_fw_options |
| * Set firmware options. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * fwopt = pointer for firmware options. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_set_fw_options(scsi_qla_host_t *vha, uint16_t *fwopts) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_SET_FIRMWARE_OPTION; |
| mcp->mb[1] = fwopts[1]; |
| mcp->mb[2] = fwopts[2]; |
| mcp->mb[3] = fwopts[3]; |
| mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| if (IS_FWI2_CAPABLE(vha->hw)) { |
| mcp->in_mb |= MBX_1; |
| } else { |
| mcp->mb[10] = fwopts[10]; |
| mcp->mb[11] = fwopts[11]; |
| mcp->mb[12] = 0; /* Undocumented, but used */ |
| mcp->out_mb |= MBX_12|MBX_11|MBX_10; |
| } |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| fwopts[0] = mcp->mb[0]; |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__, |
| vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_mbx_reg_test |
| * Mailbox register wrap test. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_mbx_reg_test(scsi_qla_host_t *vha) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", vha->host_no)); |
| |
| mcp->mb[0] = MBC_MAILBOX_REGISTER_TEST; |
| mcp->mb[1] = 0xAAAA; |
| mcp->mb[2] = 0x5555; |
| mcp->mb[3] = 0xAA55; |
| mcp->mb[4] = 0x55AA; |
| mcp->mb[5] = 0xA5A5; |
| mcp->mb[6] = 0x5A5A; |
| mcp->mb[7] = 0x2525; |
| mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval == QLA_SUCCESS) { |
| if (mcp->mb[1] != 0xAAAA || mcp->mb[2] != 0x5555 || |
| mcp->mb[3] != 0xAA55 || mcp->mb[4] != 0x55AA) |
| rval = QLA_FUNCTION_FAILED; |
| if (mcp->mb[5] != 0xA5A5 || mcp->mb[6] != 0x5A5A || |
| mcp->mb[7] != 0x2525) |
| rval = QLA_FUNCTION_FAILED; |
| } |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n", |
| vha->host_no, rval)); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_verify_checksum |
| * Verify firmware checksum. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_verify_checksum(scsi_qla_host_t *vha, uint32_t risc_addr) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_VERIFY_CHECKSUM; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_0; |
| if (IS_FWI2_CAPABLE(vha->hw)) { |
| mcp->mb[1] = MSW(risc_addr); |
| mcp->mb[2] = LSW(risc_addr); |
| mcp->out_mb |= MBX_2|MBX_1; |
| mcp->in_mb |= MBX_2|MBX_1; |
| } else { |
| mcp->mb[1] = LSW(risc_addr); |
| mcp->out_mb |= MBX_1; |
| mcp->in_mb |= MBX_1; |
| } |
| |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__, |
| vha->host_no, rval, IS_FWI2_CAPABLE(vha->hw) ? |
| (mcp->mb[2] << 16) | mcp->mb[1]: mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_issue_iocb |
| * Issue IOCB using mailbox command |
| * |
| * Input: |
| * ha = adapter state pointer. |
| * buffer = buffer pointer. |
| * phys_addr = physical address of buffer. |
| * size = size of buffer. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| static int |
| qla2x00_issue_iocb_timeout(scsi_qla_host_t *vha, void *buffer, |
| dma_addr_t phys_addr, size_t size, uint32_t tov) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| mcp->mb[0] = MBC_IOCB_COMMAND_A64; |
| mcp->mb[1] = 0; |
| mcp->mb[2] = MSW(phys_addr); |
| mcp->mb[3] = LSW(phys_addr); |
| mcp->mb[6] = MSW(MSD(phys_addr)); |
| mcp->mb[7] = LSW(MSD(phys_addr)); |
| mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_2|MBX_0; |
| mcp->tov = tov; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n", |
| vha->host_no, rval)); |
| } else { |
| sts_entry_t *sts_entry = (sts_entry_t *) buffer; |
| |
| /* Mask reserved bits. */ |
| sts_entry->entry_status &= |
| IS_FWI2_CAPABLE(vha->hw) ? RF_MASK_24XX : RF_MASK; |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_issue_iocb(scsi_qla_host_t *vha, void *buffer, dma_addr_t phys_addr, |
| size_t size) |
| { |
| return qla2x00_issue_iocb_timeout(vha, buffer, phys_addr, size, |
| MBX_TOV_SECONDS); |
| } |
| |
| /* |
| * qla2x00_abort_command |
| * Abort command aborts a specified IOCB. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * sp = SB structure pointer. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_abort_command(srb_t *sp) |
| { |
| unsigned long flags = 0; |
| int rval; |
| uint32_t handle = 0; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| fc_port_t *fcport = sp->fcport; |
| scsi_qla_host_t *vha = fcport->vha; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = vha->req; |
| |
| DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha->host_no)); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) { |
| if (req->outstanding_cmds[handle] == sp) |
| break; |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| if (handle == MAX_OUTSTANDING_COMMANDS) { |
| /* command not found */ |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| mcp->mb[0] = MBC_ABORT_COMMAND; |
| if (HAS_EXTENDED_IDS(ha)) |
| mcp->mb[1] = fcport->loop_id; |
| else |
| mcp->mb[1] = fcport->loop_id << 8; |
| mcp->mb[2] = (uint16_t)handle; |
| mcp->mb[3] = (uint16_t)(handle >> 16); |
| mcp->mb[6] = (uint16_t)sp->cmd->device->lun; |
| mcp->out_mb = MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n", |
| vha->host_no, rval)); |
| } else { |
| DEBUG11(printk("qla2x00_abort_command(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_abort_target(struct fc_port *fcport, unsigned int l, int tag) |
| { |
| int rval, rval2; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| scsi_qla_host_t *vha; |
| struct req_que *req; |
| struct rsp_que *rsp; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->vha->host_no)); |
| |
| l = l; |
| vha = fcport->vha; |
| req = vha->hw->req_q_map[tag]; |
| rsp = vha->hw->rsp_q_map[tag]; |
| mcp->mb[0] = MBC_ABORT_TARGET; |
| mcp->out_mb = MBX_9|MBX_2|MBX_1|MBX_0; |
| if (HAS_EXTENDED_IDS(vha->hw)) { |
| mcp->mb[1] = fcport->loop_id; |
| mcp->mb[10] = 0; |
| mcp->out_mb |= MBX_10; |
| } else { |
| mcp->mb[1] = fcport->loop_id << 8; |
| } |
| mcp->mb[2] = vha->hw->loop_reset_delay; |
| mcp->mb[9] = vha->vp_idx; |
| |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } |
| |
| /* Issue marker IOCB. */ |
| rval2 = qla2x00_marker(vha, req, rsp, fcport->loop_id, 0, |
| MK_SYNC_ID); |
| if (rval2 != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB " |
| "(%x).\n", __func__, vha->host_no, rval2)); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_lun_reset(struct fc_port *fcport, unsigned int l, int tag) |
| { |
| int rval, rval2; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| scsi_qla_host_t *vha; |
| struct req_que *req; |
| struct rsp_que *rsp; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->vha->host_no)); |
| |
| vha = fcport->vha; |
| req = vha->hw->req_q_map[tag]; |
| rsp = vha->hw->rsp_q_map[tag]; |
| mcp->mb[0] = MBC_LUN_RESET; |
| mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0; |
| if (HAS_EXTENDED_IDS(vha->hw)) |
| mcp->mb[1] = fcport->loop_id; |
| else |
| mcp->mb[1] = fcport->loop_id << 8; |
| mcp->mb[2] = l; |
| mcp->mb[3] = 0; |
| mcp->mb[9] = vha->vp_idx; |
| |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } |
| |
| /* Issue marker IOCB. */ |
| rval2 = qla2x00_marker(vha, req, rsp, fcport->loop_id, l, |
| MK_SYNC_ID_LUN); |
| if (rval2 != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB " |
| "(%x).\n", __func__, vha->host_no, rval2)); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_adapter_id |
| * Get adapter ID and topology. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * id = pointer for loop ID. |
| * al_pa = pointer for AL_PA. |
| * area = pointer for area. |
| * domain = pointer for domain. |
| * top = pointer for topology. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa, |
| uint8_t *area, uint8_t *domain, uint16_t *top, uint16_t *sw_cap) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n", |
| vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_ADAPTER_LOOP_ID; |
| mcp->mb[9] = vha->vp_idx; |
| mcp->out_mb = MBX_9|MBX_0; |
| mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| if (IS_QLA81XX(vha->hw)) |
| mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (mcp->mb[0] == MBS_COMMAND_ERROR) |
| rval = QLA_COMMAND_ERROR; |
| else if (mcp->mb[0] == MBS_INVALID_COMMAND) |
| rval = QLA_INVALID_COMMAND; |
| |
| /* Return data. */ |
| *id = mcp->mb[1]; |
| *al_pa = LSB(mcp->mb[2]); |
| *area = MSB(mcp->mb[2]); |
| *domain = LSB(mcp->mb[3]); |
| *top = mcp->mb[6]; |
| *sw_cap = mcp->mb[7]; |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n", |
| vha->host_no, rval)); |
| } else { |
| DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n", |
| vha->host_no)); |
| |
| if (IS_QLA81XX(vha->hw)) { |
| vha->fcoe_vlan_id = mcp->mb[9] & 0xfff; |
| vha->fcoe_fcf_idx = mcp->mb[10]; |
| vha->fcoe_vn_port_mac[5] = mcp->mb[11] >> 8; |
| vha->fcoe_vn_port_mac[4] = mcp->mb[11] & 0xff; |
| vha->fcoe_vn_port_mac[3] = mcp->mb[12] >> 8; |
| vha->fcoe_vn_port_mac[2] = mcp->mb[12] & 0xff; |
| vha->fcoe_vn_port_mac[1] = mcp->mb[13] >> 8; |
| vha->fcoe_vn_port_mac[0] = mcp->mb[13] & 0xff; |
| } |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_retry_cnt |
| * Get current firmware login retry count and delay. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * retry_cnt = pointer to login retry count. |
| * tov = pointer to login timeout value. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_retry_cnt(scsi_qla_host_t *vha, uint8_t *retry_cnt, uint8_t *tov, |
| uint16_t *r_a_tov) |
| { |
| int rval; |
| uint16_t ratov; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n", |
| vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_RETRY_COUNT; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n", |
| vha->host_no, mcp->mb[0])); |
| } else { |
| /* Convert returned data and check our values. */ |
| *r_a_tov = mcp->mb[3] / 2; |
| ratov = (mcp->mb[3]/2) / 10; /* mb[3] value is in 100ms */ |
| if (mcp->mb[1] * ratov > (*retry_cnt) * (*tov)) { |
| /* Update to the larger values */ |
| *retry_cnt = (uint8_t)mcp->mb[1]; |
| *tov = ratov; |
| } |
| |
| DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d " |
| "ratov=%d.\n", vha->host_no, mcp->mb[3], ratov)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_init_firmware |
| * Initialize adapter firmware. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * dptr = Initialization control block pointer. |
| * size = size of initialization control block. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| struct qla_hw_data *ha = vha->hw; |
| |
| DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n", |
| vha->host_no)); |
| |
| if (ha->flags.npiv_supported) |
| mcp->mb[0] = MBC_MID_INITIALIZE_FIRMWARE; |
| else |
| mcp->mb[0] = MBC_INITIALIZE_FIRMWARE; |
| |
| mcp->mb[1] = 0; |
| mcp->mb[2] = MSW(ha->init_cb_dma); |
| mcp->mb[3] = LSW(ha->init_cb_dma); |
| mcp->mb[6] = MSW(MSD(ha->init_cb_dma)); |
| mcp->mb[7] = LSW(MSD(ha->init_cb_dma)); |
| mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| if (IS_QLA81XX(ha) && ha->ex_init_cb->ex_version) { |
| mcp->mb[1] = BIT_0; |
| mcp->mb[10] = MSW(ha->ex_init_cb_dma); |
| mcp->mb[11] = LSW(ha->ex_init_cb_dma); |
| mcp->mb[12] = MSW(MSD(ha->ex_init_cb_dma)); |
| mcp->mb[13] = LSW(MSD(ha->ex_init_cb_dma)); |
| mcp->mb[14] = sizeof(*ha->ex_init_cb); |
| mcp->out_mb |= MBX_14|MBX_13|MBX_12|MBX_11|MBX_10; |
| } |
| mcp->in_mb = MBX_0; |
| mcp->buf_size = size; |
| mcp->flags = MBX_DMA_OUT; |
| mcp->tov = MBX_TOV_SECONDS; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x " |
| "mb0=%x.\n", |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_port_database |
| * Issue normal/enhanced get port database mailbox command |
| * and copy device name as necessary. |
| * |
| * Input: |
| * ha = adapter state pointer. |
| * dev = structure pointer. |
| * opt = enhanced cmd option byte. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| port_database_t *pd; |
| struct port_database_24xx *pd24; |
| dma_addr_t pd_dma; |
| struct qla_hw_data *ha = vha->hw; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| pd24 = NULL; |
| pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma); |
| if (pd == NULL) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Port Database " |
| "structure.\n", __func__, vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| memset(pd, 0, max(PORT_DATABASE_SIZE, PORT_DATABASE_24XX_SIZE)); |
| |
| mcp->mb[0] = MBC_GET_PORT_DATABASE; |
| if (opt != 0 && !IS_FWI2_CAPABLE(ha)) |
| mcp->mb[0] = MBC_ENHANCED_GET_PORT_DATABASE; |
| mcp->mb[2] = MSW(pd_dma); |
| mcp->mb[3] = LSW(pd_dma); |
| mcp->mb[6] = MSW(MSD(pd_dma)); |
| mcp->mb[7] = LSW(MSD(pd_dma)); |
| mcp->mb[9] = vha->vp_idx; |
| mcp->out_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; |
| mcp->in_mb = MBX_0; |
| if (IS_FWI2_CAPABLE(ha)) { |
| mcp->mb[1] = fcport->loop_id; |
| mcp->mb[10] = opt; |
| mcp->out_mb |= MBX_10|MBX_1; |
| mcp->in_mb |= MBX_1; |
| } else if (HAS_EXTENDED_IDS(ha)) { |
| mcp->mb[1] = fcport->loop_id; |
| mcp->mb[10] = opt; |
| mcp->out_mb |= MBX_10|MBX_1; |
| } else { |
| mcp->mb[1] = fcport->loop_id << 8 | opt; |
| mcp->out_mb |= MBX_1; |
| } |
| mcp->buf_size = IS_FWI2_CAPABLE(ha) ? |
| PORT_DATABASE_24XX_SIZE : PORT_DATABASE_SIZE; |
| mcp->flags = MBX_DMA_IN; |
| mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) |
| goto gpd_error_out; |
| |
| if (IS_FWI2_CAPABLE(ha)) { |
| pd24 = (struct port_database_24xx *) pd; |
| |
| /* Check for logged in state. */ |
| if (pd24->current_login_state != PDS_PRLI_COMPLETE && |
| pd24->last_login_state != PDS_PRLI_COMPLETE) { |
| DEBUG2(printk("%s(%ld): Unable to verify " |
| "login-state (%x/%x) for loop_id %x\n", |
| __func__, vha->host_no, |
| pd24->current_login_state, |
| pd24->last_login_state, fcport->loop_id)); |
| rval = QLA_FUNCTION_FAILED; |
| goto gpd_error_out; |
| } |
| |
| /* Names are little-endian. */ |
| memcpy(fcport->node_name, pd24->node_name, WWN_SIZE); |
| memcpy(fcport->port_name, pd24->port_name, WWN_SIZE); |
| |
| /* Get port_id of device. */ |
| fcport->d_id.b.domain = pd24->port_id[0]; |
| fcport->d_id.b.area = pd24->port_id[1]; |
| fcport->d_id.b.al_pa = pd24->port_id[2]; |
| fcport->d_id.b.rsvd_1 = 0; |
| |
| /* If not target must be initiator or unknown type. */ |
| if ((pd24->prli_svc_param_word_3[0] & BIT_4) == 0) |
| fcport->port_type = FCT_INITIATOR; |
| else |
| fcport->port_type = FCT_TARGET; |
| } else { |
| /* Check for logged in state. */ |
| if (pd->master_state != PD_STATE_PORT_LOGGED_IN && |
| pd->slave_state != PD_STATE_PORT_LOGGED_IN) { |
| rval = QLA_FUNCTION_FAILED; |
| goto gpd_error_out; |
| } |
| |
| /* Names are little-endian. */ |
| memcpy(fcport->node_name, pd->node_name, WWN_SIZE); |
| memcpy(fcport->port_name, pd->port_name, WWN_SIZE); |
| |
| /* Get port_id of device. */ |
| fcport->d_id.b.domain = pd->port_id[0]; |
| fcport->d_id.b.area = pd->port_id[3]; |
| fcport->d_id.b.al_pa = pd->port_id[2]; |
| fcport->d_id.b.rsvd_1 = 0; |
| |
| /* If not target must be initiator or unknown type. */ |
| if ((pd->prli_svc_param_word_3[0] & BIT_4) == 0) |
| fcport->port_type = FCT_INITIATOR; |
| else |
| fcport->port_type = FCT_TARGET; |
| |
| /* Passback COS information. */ |
| fcport->supported_classes = (pd->options & BIT_4) ? |
| FC_COS_CLASS2: FC_COS_CLASS3; |
| } |
| |
| gpd_error_out: |
| dma_pool_free(ha->s_dma_pool, pd, pd_dma); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_firmware_state |
| * Get adapter firmware state. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * dptr = pointer for firmware state. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_firmware_state(scsi_qla_host_t *vha, uint16_t *states) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n", |
| vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_FIRMWARE_STATE; |
| mcp->out_mb = MBX_0; |
| if (IS_FWI2_CAPABLE(vha->hw)) |
| mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| else |
| mcp->in_mb = MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| /* Return firmware states. */ |
| states[0] = mcp->mb[1]; |
| if (IS_FWI2_CAPABLE(vha->hw)) { |
| states[1] = mcp->mb[2]; |
| states[2] = mcp->mb[3]; |
| states[3] = mcp->mb[4]; |
| states[4] = mcp->mb[5]; |
| } |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): " |
| "failed=%x.\n", vha->host_no, rval)); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_port_name |
| * Issue get port name mailbox command. |
| * Returned name is in big endian format. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * loop_id = loop ID of device. |
| * name = pointer for name. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_port_name(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t *name, |
| uint8_t opt) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n", |
| vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_PORT_NAME; |
| mcp->mb[9] = vha->vp_idx; |
| mcp->out_mb = MBX_9|MBX_1|MBX_0; |
| if (HAS_EXTENDED_IDS(vha->hw)) { |
| mcp->mb[1] = loop_id; |
| mcp->mb[10] = opt; |
| mcp->out_mb |= MBX_10; |
| } else { |
| mcp->mb[1] = loop_id << 8 | opt; |
| } |
| |
| mcp->in_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n", |
| vha->host_no, rval)); |
| } else { |
| if (name != NULL) { |
| /* This function returns name in big endian. */ |
| name[0] = MSB(mcp->mb[2]); |
| name[1] = LSB(mcp->mb[2]); |
| name[2] = MSB(mcp->mb[3]); |
| name[3] = LSB(mcp->mb[3]); |
| name[4] = MSB(mcp->mb[6]); |
| name[5] = LSB(mcp->mb[6]); |
| name[6] = MSB(mcp->mb[7]); |
| name[7] = LSB(mcp->mb[7]); |
| } |
| |
| DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_lip_reset |
| * Issue LIP reset mailbox command. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_lip_reset(scsi_qla_host_t *vha) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| if (IS_QLA81XX(vha->hw)) { |
| /* Logout across all FCFs. */ |
| mcp->mb[0] = MBC_LIP_FULL_LOGIN; |
| mcp->mb[1] = BIT_1; |
| mcp->mb[2] = 0; |
| mcp->out_mb = MBX_2|MBX_1|MBX_0; |
| } else if (IS_FWI2_CAPABLE(vha->hw)) { |
| mcp->mb[0] = MBC_LIP_FULL_LOGIN; |
| mcp->mb[1] = BIT_6; |
| mcp->mb[2] = 0; |
| mcp->mb[3] = vha->hw->loop_reset_delay; |
| mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; |
| } else { |
| mcp->mb[0] = MBC_LIP_RESET; |
| mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; |
| if (HAS_EXTENDED_IDS(vha->hw)) { |
| mcp->mb[1] = 0x00ff; |
| mcp->mb[10] = 0; |
| mcp->out_mb |= MBX_10; |
| } else { |
| mcp->mb[1] = 0xff00; |
| } |
| mcp->mb[2] = vha->hw->loop_reset_delay; |
| mcp->mb[3] = 0; |
| } |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", |
| __func__, vha->host_no, rval)); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_send_sns |
| * Send SNS command. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * sns = pointer for command. |
| * cmd_size = command size. |
| * buf_size = response/command size. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_send_sns(scsi_qla_host_t *vha, dma_addr_t sns_phys_address, |
| uint16_t cmd_size, size_t buf_size) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n", |
| vha->host_no)); |
| |
| DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total " |
| "tov=%d.\n", vha->hw->retry_count, vha->hw->login_timeout, |
| mcp->tov)); |
| |
| mcp->mb[0] = MBC_SEND_SNS_COMMAND; |
| mcp->mb[1] = cmd_size; |
| mcp->mb[2] = MSW(sns_phys_address); |
| mcp->mb[3] = LSW(sns_phys_address); |
| mcp->mb[6] = MSW(MSD(sns_phys_address)); |
| mcp->mb[7] = LSW(MSD(sns_phys_address)); |
| mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0|MBX_1; |
| mcp->buf_size = buf_size; |
| mcp->flags = MBX_DMA_OUT|MBX_DMA_IN; |
| mcp->tov = (vha->hw->login_timeout * 2) + (vha->hw->login_timeout / 2); |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x " |
| "mb[1]=%x.\n", vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x " |
| "mb[1]=%x.\n", vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain, |
| uint8_t area, uint8_t al_pa, uint16_t *mb, uint8_t opt) |
| { |
| int rval; |
| |
| struct logio_entry_24xx *lg; |
| dma_addr_t lg_dma; |
| uint32_t iop[2]; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req; |
| struct rsp_que *rsp; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| if (ha->flags.cpu_affinity_enabled) |
| req = ha->req_q_map[0]; |
| else |
| req = vha->req; |
| rsp = req->rsp; |
| |
| lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma); |
| if (lg == NULL) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n", |
| __func__, vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| memset(lg, 0, sizeof(struct logio_entry_24xx)); |
| |
| lg->entry_type = LOGINOUT_PORT_IOCB_TYPE; |
| lg->entry_count = 1; |
| lg->handle = MAKE_HANDLE(req->id, lg->handle); |
| lg->nport_handle = cpu_to_le16(loop_id); |
| lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI); |
| if (opt & BIT_0) |
| lg->control_flags |= __constant_cpu_to_le16(LCF_COND_PLOGI); |
| if (opt & BIT_1) |
| lg->control_flags |= __constant_cpu_to_le16(LCF_SKIP_PRLI); |
| lg->port_id[0] = al_pa; |
| lg->port_id[1] = area; |
| lg->port_id[2] = domain; |
| lg->vp_index = vha->vp_idx; |
| rval = qla2x00_issue_iocb(vha, lg, lg_dma, 0); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB " |
| "(%x).\n", __func__, vha->host_no, rval)); |
| } else if (lg->entry_status != 0) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- error status (%x).\n", __func__, vha->host_no, |
| lg->entry_status)); |
| rval = QLA_FUNCTION_FAILED; |
| } else if (lg->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { |
| iop[0] = le32_to_cpu(lg->io_parameter[0]); |
| iop[1] = le32_to_cpu(lg->io_parameter[1]); |
| |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- completion status (%x) ioparam=%x/%x.\n", __func__, |
| vha->host_no, le16_to_cpu(lg->comp_status), iop[0], |
| iop[1])); |
| |
| switch (iop[0]) { |
| case LSC_SCODE_PORTID_USED: |
| mb[0] = MBS_PORT_ID_USED; |
| mb[1] = LSW(iop[1]); |
| break; |
| case LSC_SCODE_NPORT_USED: |
| mb[0] = MBS_LOOP_ID_USED; |
| break; |
| case LSC_SCODE_NOLINK: |
| case LSC_SCODE_NOIOCB: |
| case LSC_SCODE_NOXCB: |
| case LSC_SCODE_CMD_FAILED: |
| case LSC_SCODE_NOFABRIC: |
| case LSC_SCODE_FW_NOT_READY: |
| case LSC_SCODE_NOT_LOGGED_IN: |
| case LSC_SCODE_NOPCB: |
| case LSC_SCODE_ELS_REJECT: |
| case LSC_SCODE_CMD_PARAM_ERR: |
| case LSC_SCODE_NONPORT: |
| case LSC_SCODE_LOGGED_IN: |
| case LSC_SCODE_NOFLOGI_ACC: |
| default: |
| mb[0] = MBS_COMMAND_ERROR; |
| break; |
| } |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| |
| iop[0] = le32_to_cpu(lg->io_parameter[0]); |
| |
| mb[0] = MBS_COMMAND_COMPLETE; |
| mb[1] = 0; |
| if (iop[0] & BIT_4) { |
| if (iop[0] & BIT_8) |
| mb[1] |= BIT_1; |
| } else |
| mb[1] = BIT_0; |
| |
| /* Passback COS information. */ |
| mb[10] = 0; |
| if (lg->io_parameter[7] || lg->io_parameter[8]) |
| mb[10] |= BIT_0; /* Class 2. */ |
| if (lg->io_parameter[9] || lg->io_parameter[10]) |
| mb[10] |= BIT_1; /* Class 3. */ |
| } |
| |
| dma_pool_free(ha->s_dma_pool, lg, lg_dma); |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_login_fabric |
| * Issue login fabric port mailbox command. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * loop_id = device loop ID. |
| * domain = device domain. |
| * area = device area. |
| * al_pa = device AL_PA. |
| * status = pointer for return status. |
| * opt = command options. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain, |
| uint8_t area, uint8_t al_pa, uint16_t *mb, uint8_t opt) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| struct qla_hw_data *ha = vha->hw; |
| |
| DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", vha->host_no)); |
| |
| mcp->mb[0] = MBC_LOGIN_FABRIC_PORT; |
| mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; |
| if (HAS_EXTENDED_IDS(ha)) { |
| mcp->mb[1] = loop_id; |
| mcp->mb[10] = opt; |
| mcp->out_mb |= MBX_10; |
| } else { |
| mcp->mb[1] = (loop_id << 8) | opt; |
| } |
| mcp->mb[2] = domain; |
| mcp->mb[3] = area << 8 | al_pa; |
| |
| mcp->in_mb = MBX_7|MBX_6|MBX_2|MBX_1|MBX_0; |
| mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| /* Return mailbox statuses. */ |
| if (mb != NULL) { |
| mb[0] = mcp->mb[0]; |
| mb[1] = mcp->mb[1]; |
| mb[2] = mcp->mb[2]; |
| mb[6] = mcp->mb[6]; |
| mb[7] = mcp->mb[7]; |
| /* COS retrieved from Get-Port-Database mailbox command. */ |
| mb[10] = 0; |
| } |
| |
| if (rval != QLA_SUCCESS) { |
| /* RLU tmp code: need to change main mailbox_command function to |
| * return ok even when the mailbox completion value is not |
| * SUCCESS. The caller needs to be responsible to interpret |
| * the return values of this mailbox command if we're not |
| * to change too much of the existing code. |
| */ |
| if (mcp->mb[0] == 0x4001 || mcp->mb[0] == 0x4002 || |
| mcp->mb[0] == 0x4003 || mcp->mb[0] == 0x4005 || |
| mcp->mb[0] == 0x4006) |
| rval = QLA_SUCCESS; |
| |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x " |
| "mb[0]=%x mb[1]=%x mb[2]=%x.\n", vha->host_no, rval, |
| mcp->mb[0], mcp->mb[1], mcp->mb[2])); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_login_local_device |
| * Issue login loop port mailbox command. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * loop_id = device loop ID. |
| * opt = command options. |
| * |
| * Returns: |
| * Return status code. |
| * |
| * Context: |
| * Kernel context. |
| * |
| */ |
| int |
| qla2x00_login_local_device(scsi_qla_host_t *vha, fc_port_t *fcport, |
| uint16_t *mb_ret, uint8_t opt) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (IS_FWI2_CAPABLE(ha)) |
| return qla24xx_login_fabric(vha, fcport->loop_id, |
| fcport->d_id.b.domain, fcport->d_id.b.area, |
| fcport->d_id.b.al_pa, mb_ret, opt); |
| |
| DEBUG3(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_LOGIN_LOOP_PORT; |
| if (HAS_EXTENDED_IDS(ha)) |
| mcp->mb[1] = fcport->loop_id; |
| else |
| mcp->mb[1] = fcport->loop_id << 8; |
| mcp->mb[2] = opt; |
| mcp->out_mb = MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_7|MBX_6|MBX_1|MBX_0; |
| mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| /* Return mailbox statuses. */ |
| if (mb_ret != NULL) { |
| mb_ret[0] = mcp->mb[0]; |
| mb_ret[1] = mcp->mb[1]; |
| mb_ret[6] = mcp->mb[6]; |
| mb_ret[7] = mcp->mb[7]; |
| } |
| |
| if (rval != QLA_SUCCESS) { |
| /* AV tmp code: need to change main mailbox_command function to |
| * return ok even when the mailbox completion value is not |
| * SUCCESS. The caller needs to be responsible to interpret |
| * the return values of this mailbox command if we're not |
| * to change too much of the existing code. |
| */ |
| if (mcp->mb[0] == 0x4005 || mcp->mb[0] == 0x4006) |
| rval = QLA_SUCCESS; |
| |
| DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x " |
| "mb[6]=%x mb[7]=%x.\n", __func__, vha->host_no, rval, |
| mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7])); |
| DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x " |
| "mb[6]=%x mb[7]=%x.\n", __func__, vha->host_no, rval, |
| mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7])); |
| } else { |
| /*EMPTY*/ |
| DEBUG3(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return (rval); |
| } |
| |
| int |
| qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain, |
| uint8_t area, uint8_t al_pa) |
| { |
| int rval; |
| struct logio_entry_24xx *lg; |
| dma_addr_t lg_dma; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req; |
| struct rsp_que *rsp; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma); |
| if (lg == NULL) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n", |
| __func__, vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| memset(lg, 0, sizeof(struct logio_entry_24xx)); |
| |
| if (ql2xmaxqueues > 1) |
| req = ha->req_q_map[0]; |
| else |
| req = vha->req; |
| rsp = req->rsp; |
| lg->entry_type = LOGINOUT_PORT_IOCB_TYPE; |
| lg->entry_count = 1; |
| lg->handle = MAKE_HANDLE(req->id, lg->handle); |
| lg->nport_handle = cpu_to_le16(loop_id); |
| lg->control_flags = |
| __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO); |
| lg->port_id[0] = al_pa; |
| lg->port_id[1] = area; |
| lg->port_id[2] = domain; |
| lg->vp_index = vha->vp_idx; |
| |
| rval = qla2x00_issue_iocb(vha, lg, lg_dma, 0); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB " |
| "(%x).\n", __func__, vha->host_no, rval)); |
| } else if (lg->entry_status != 0) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- error status (%x).\n", __func__, vha->host_no, |
| lg->entry_status)); |
| rval = QLA_FUNCTION_FAILED; |
| } else if (lg->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { |
| DEBUG2_3_11(printk("%s(%ld %d): failed to complete IOCB " |
| "-- completion status (%x) ioparam=%x/%x.\n", __func__, |
| vha->host_no, vha->vp_idx, le16_to_cpu(lg->comp_status), |
| le32_to_cpu(lg->io_parameter[0]), |
| le32_to_cpu(lg->io_parameter[1]))); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| dma_pool_free(ha->s_dma_pool, lg, lg_dma); |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_fabric_logout |
| * Issue logout fabric port mailbox command. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * loop_id = device loop ID. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain, |
| uint8_t area, uint8_t al_pa) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n", |
| vha->host_no)); |
| |
| mcp->mb[0] = MBC_LOGOUT_FABRIC_PORT; |
| mcp->out_mb = MBX_1|MBX_0; |
| if (HAS_EXTENDED_IDS(vha->hw)) { |
| mcp->mb[1] = loop_id; |
| mcp->mb[10] = 0; |
| mcp->out_mb |= MBX_10; |
| } else { |
| mcp->mb[1] = loop_id << 8; |
| } |
| |
| mcp->in_mb = MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x " |
| "mbx1=%x.\n", vha->host_no, rval, mcp->mb[1])); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_full_login_lip |
| * Issue full login LIP mailbox command. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * TARGET_QUEUE_LOCK must be released. |
| * ADAPTER_STATE_LOCK must be released. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_full_login_lip(scsi_qla_host_t *vha) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n", |
| vha->host_no)); |
| |
| mcp->mb[0] = MBC_LIP_FULL_LOGIN; |
| mcp->mb[1] = IS_FWI2_CAPABLE(vha->hw) ? BIT_3 : 0; |
| mcp->mb[2] = 0; |
| mcp->mb[3] = 0; |
| mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n", |
| vha->host_no, rval)); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_id_list |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_id_list(scsi_qla_host_t *vha, void *id_list, dma_addr_t id_list_dma, |
| uint16_t *entries) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n", |
| vha->host_no)); |
| |
| if (id_list == NULL) |
| return QLA_FUNCTION_FAILED; |
| |
| mcp->mb[0] = MBC_GET_ID_LIST; |
| mcp->out_mb = MBX_0; |
| if (IS_FWI2_CAPABLE(vha->hw)) { |
| mcp->mb[2] = MSW(id_list_dma); |
| mcp->mb[3] = LSW(id_list_dma); |
| mcp->mb[6] = MSW(MSD(id_list_dma)); |
| mcp->mb[7] = LSW(MSD(id_list_dma)); |
| mcp->mb[8] = 0; |
| mcp->mb[9] = vha->vp_idx; |
| mcp->out_mb |= MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2; |
| } else { |
| mcp->mb[1] = MSW(id_list_dma); |
| mcp->mb[2] = LSW(id_list_dma); |
| mcp->mb[3] = MSW(MSD(id_list_dma)); |
| mcp->mb[6] = LSW(MSD(id_list_dma)); |
| mcp->out_mb |= MBX_6|MBX_3|MBX_2|MBX_1; |
| } |
| mcp->in_mb = MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n", |
| vha->host_no, rval)); |
| } else { |
| *entries = mcp->mb[1]; |
| DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n", |
| vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_get_resource_cnts |
| * Get current firmware resource counts. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_resource_cnts(scsi_qla_host_t *vha, uint16_t *cur_xchg_cnt, |
| uint16_t *orig_xchg_cnt, uint16_t *cur_iocb_cnt, |
| uint16_t *orig_iocb_cnt, uint16_t *max_npiv_vports) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_RESOURCE_COUNTS; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_11|MBX_10|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__, |
| vha->host_no, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x " |
| "mb7=%x mb10=%x mb11=%x.\n", __func__, vha->host_no, |
| mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[6], mcp->mb[7], |
| mcp->mb[10], mcp->mb[11])); |
| |
| if (cur_xchg_cnt) |
| *cur_xchg_cnt = mcp->mb[3]; |
| if (orig_xchg_cnt) |
| *orig_xchg_cnt = mcp->mb[6]; |
| if (cur_iocb_cnt) |
| *cur_iocb_cnt = mcp->mb[7]; |
| if (orig_iocb_cnt) |
| *orig_iocb_cnt = mcp->mb[10]; |
| if (vha->hw->flags.npiv_supported && max_npiv_vports) |
| *max_npiv_vports = mcp->mb[11]; |
| } |
| |
| return (rval); |
| } |
| |
| #if defined(QL_DEBUG_LEVEL_3) |
| /* |
| * qla2x00_get_fcal_position_map |
| * Get FCAL (LILP) position map using mailbox command |
| * |
| * Input: |
| * ha = adapter state pointer. |
| * pos_map = buffer pointer (can be NULL). |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla2x00_get_fcal_position_map(scsi_qla_host_t *vha, char *pos_map) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| char *pmap; |
| dma_addr_t pmap_dma; |
| struct qla_hw_data *ha = vha->hw; |
| |
| pmap = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pmap_dma); |
| if (pmap == NULL) { |
| DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****", |
| __func__, vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| memset(pmap, 0, FCAL_MAP_SIZE); |
| |
| mcp->mb[0] = MBC_GET_FC_AL_POSITION_MAP; |
| mcp->mb[2] = MSW(pmap_dma); |
| mcp->mb[3] = LSW(pmap_dma); |
| mcp->mb[6] = MSW(MSD(pmap_dma)); |
| mcp->mb[7] = LSW(MSD(pmap_dma)); |
| mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; |
| mcp->in_mb = MBX_1|MBX_0; |
| mcp->buf_size = FCAL_MAP_SIZE; |
| mcp->flags = MBX_DMA_IN; |
| mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval == QLA_SUCCESS) { |
| DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map " |
| "size (%x)\n", __func__, vha->host_no, mcp->mb[0], |
| mcp->mb[1], (unsigned)pmap[0])); |
| DEBUG11(qla2x00_dump_buffer(pmap, pmap[0] + 1)); |
| |
| if (pos_map) |
| memcpy(pos_map, pmap, FCAL_MAP_SIZE); |
| } |
| dma_pool_free(ha->s_dma_pool, pmap, pmap_dma); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| #endif |
| |
| /* |
| * qla2x00_get_link_status |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * loop_id = device loop ID. |
| * ret_buf = pointer to link status return buffer. |
| * |
| * Returns: |
| * 0 = success. |
| * BIT_0 = mem alloc error. |
| * BIT_1 = mailbox error. |
| */ |
| int |
| qla2x00_get_link_status(scsi_qla_host_t *vha, uint16_t loop_id, |
| struct link_statistics *stats, dma_addr_t stats_dma) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| uint32_t *siter, *diter, dwords; |
| struct qla_hw_data *ha = vha->hw; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_LINK_STATUS; |
| mcp->mb[2] = MSW(stats_dma); |
| mcp->mb[3] = LSW(stats_dma); |
| mcp->mb[6] = MSW(MSD(stats_dma)); |
| mcp->mb[7] = LSW(MSD(stats_dma)); |
| mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; |
| mcp->in_mb = MBX_0; |
| if (IS_FWI2_CAPABLE(ha)) { |
| mcp->mb[1] = loop_id; |
| mcp->mb[4] = 0; |
| mcp->mb[10] = 0; |
| mcp->out_mb |= MBX_10|MBX_4|MBX_1; |
| mcp->in_mb |= MBX_1; |
| } else if (HAS_EXTENDED_IDS(ha)) { |
| mcp->mb[1] = loop_id; |
| mcp->mb[10] = 0; |
| mcp->out_mb |= MBX_10|MBX_1; |
| } else { |
| mcp->mb[1] = loop_id << 8; |
| mcp->out_mb |= MBX_1; |
| } |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = IOCTL_CMD; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval == QLA_SUCCESS) { |
| if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { |
| DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n", |
| __func__, vha->host_no, mcp->mb[0])); |
| rval = QLA_FUNCTION_FAILED; |
| } else { |
| /* Copy over data -- firmware data is LE. */ |
| dwords = offsetof(struct link_statistics, unused1) / 4; |
| siter = diter = &stats->link_fail_cnt; |
| while (dwords--) |
| *diter++ = le32_to_cpu(*siter++); |
| } |
| } else { |
| /* Failed. */ |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla24xx_get_isp_stats(scsi_qla_host_t *vha, struct link_statistics *stats, |
| dma_addr_t stats_dma) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| uint32_t *siter, *diter, dwords; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_LINK_PRIV_STATS; |
| mcp->mb[2] = MSW(stats_dma); |
| mcp->mb[3] = LSW(stats_dma); |
| mcp->mb[6] = MSW(MSD(stats_dma)); |
| mcp->mb[7] = LSW(MSD(stats_dma)); |
| mcp->mb[8] = sizeof(struct link_statistics) / 4; |
| mcp->mb[9] = vha->vp_idx; |
| mcp->mb[10] = 0; |
| mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; |
| mcp->in_mb = MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = IOCTL_CMD; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval == QLA_SUCCESS) { |
| if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { |
| DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n", |
| __func__, vha->host_no, mcp->mb[0])); |
| rval = QLA_FUNCTION_FAILED; |
| } else { |
| /* Copy over data -- firmware data is LE. */ |
| dwords = sizeof(struct link_statistics) / 4; |
| siter = diter = &stats->link_fail_cnt; |
| while (dwords--) |
| *diter++ = le32_to_cpu(*siter++); |
| } |
| } else { |
| /* Failed. */ |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla24xx_abort_command(srb_t *sp) |
| { |
| int rval; |
| unsigned long flags = 0; |
| |
| struct abort_entry_24xx *abt; |
| dma_addr_t abt_dma; |
| uint32_t handle; |
| fc_port_t *fcport = sp->fcport; |
| struct scsi_qla_host *vha = fcport->vha; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = vha->req; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) { |
| if (req->outstanding_cmds[handle] == sp) |
| break; |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| if (handle == MAX_OUTSTANDING_COMMANDS) { |
| /* Command not found. */ |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| abt = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &abt_dma); |
| if (abt == NULL) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n", |
| __func__, vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| memset(abt, 0, sizeof(struct abort_entry_24xx)); |
| |
| abt->entry_type = ABORT_IOCB_TYPE; |
| abt->entry_count = 1; |
| abt->handle = MAKE_HANDLE(req->id, abt->handle); |
| abt->nport_handle = cpu_to_le16(fcport->loop_id); |
| abt->handle_to_abort = handle; |
| abt->port_id[0] = fcport->d_id.b.al_pa; |
| abt->port_id[1] = fcport->d_id.b.area; |
| abt->port_id[2] = fcport->d_id.b.domain; |
| abt->vp_index = fcport->vp_idx; |
| |
| abt->req_que_no = cpu_to_le16(req->id); |
| |
| rval = qla2x00_issue_iocb(vha, abt, abt_dma, 0); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n", |
| __func__, vha->host_no, rval)); |
| } else if (abt->entry_status != 0) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- error status (%x).\n", __func__, vha->host_no, |
| abt->entry_status)); |
| rval = QLA_FUNCTION_FAILED; |
| } else if (abt->nport_handle != __constant_cpu_to_le16(0)) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- completion status (%x).\n", __func__, vha->host_no, |
| le16_to_cpu(abt->nport_handle))); |
| rval = QLA_FUNCTION_FAILED; |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| dma_pool_free(ha->s_dma_pool, abt, abt_dma); |
| |
| return rval; |
| } |
| |
| struct tsk_mgmt_cmd { |
| union { |
| struct tsk_mgmt_entry tsk; |
| struct sts_entry_24xx sts; |
| } p; |
| }; |
| |
| static int |
| __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport, |
| unsigned int l, int tag) |
| { |
| int rval, rval2; |
| struct tsk_mgmt_cmd *tsk; |
| dma_addr_t tsk_dma; |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha; |
| struct req_que *req; |
| struct rsp_que *rsp; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->vha->host_no)); |
| |
| vha = fcport->vha; |
| ha = vha->hw; |
| req = vha->req; |
| if (ha->flags.cpu_affinity_enabled) |
| rsp = ha->rsp_q_map[tag + 1]; |
| else |
| rsp = req->rsp; |
| tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma); |
| if (tsk == NULL) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Task Management " |
| "IOCB.\n", __func__, vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| memset(tsk, 0, sizeof(struct tsk_mgmt_cmd)); |
| |
| tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE; |
| tsk->p.tsk.entry_count = 1; |
| tsk->p.tsk.handle = MAKE_HANDLE(req->id, tsk->p.tsk.handle); |
| tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id); |
| tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); |
| tsk->p.tsk.control_flags = cpu_to_le32(type); |
| tsk->p.tsk.port_id[0] = fcport->d_id.b.al_pa; |
| tsk->p.tsk.port_id[1] = fcport->d_id.b.area; |
| tsk->p.tsk.port_id[2] = fcport->d_id.b.domain; |
| tsk->p.tsk.vp_index = fcport->vp_idx; |
| if (type == TCF_LUN_RESET) { |
| int_to_scsilun(l, &tsk->p.tsk.lun); |
| host_to_fcp_swap((uint8_t *)&tsk->p.tsk.lun, |
| sizeof(tsk->p.tsk.lun)); |
| } |
| |
| rval = qla2x00_issue_iocb(vha, tsk, tsk_dma, 0); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue %s Reset IOCB " |
| "(%x).\n", __func__, vha->host_no, name, rval)); |
| } else if (tsk->p.sts.entry_status != 0) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- error status (%x).\n", __func__, vha->host_no, |
| tsk->p.sts.entry_status)); |
| rval = QLA_FUNCTION_FAILED; |
| } else if (tsk->p.sts.comp_status != |
| __constant_cpu_to_le16(CS_COMPLETE)) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- completion status (%x).\n", __func__, |
| vha->host_no, le16_to_cpu(tsk->p.sts.comp_status))); |
| rval = QLA_FUNCTION_FAILED; |
| } |
| |
| /* Issue marker IOCB. */ |
| rval2 = qla2x00_marker(vha, req, rsp, fcport->loop_id, l, |
| type == TCF_LUN_RESET ? MK_SYNC_ID_LUN: MK_SYNC_ID); |
| if (rval2 != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB " |
| "(%x).\n", __func__, vha->host_no, rval2)); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| dma_pool_free(ha->s_dma_pool, tsk, tsk_dma); |
| |
| return rval; |
| } |
| |
| int |
| qla24xx_abort_target(struct fc_port *fcport, unsigned int l, int tag) |
| { |
| return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l, tag); |
| } |
| |
| int |
| qla24xx_lun_reset(struct fc_port *fcport, unsigned int l, int tag) |
| { |
| return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l, tag); |
| } |
| |
| int |
| qla2x00_system_error(scsi_qla_host_t *vha) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_GEN_SYSTEM_ERROR; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = 5; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /** |
| * qla2x00_set_serdes_params() - |
| * @ha: HA context |
| * |
| * Returns |
| */ |
| int |
| qla2x00_set_serdes_params(scsi_qla_host_t *vha, uint16_t sw_em_1g, |
| uint16_t sw_em_2g, uint16_t sw_em_4g) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_SERDES_PARAMS; |
| mcp->mb[1] = BIT_0; |
| mcp->mb[2] = sw_em_1g | BIT_15; |
| mcp->mb[3] = sw_em_2g | BIT_15; |
| mcp->mb[4] = sw_em_4g | BIT_15; |
| mcp->out_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| /*EMPTY*/ |
| DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| /*EMPTY*/ |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_stop_firmware(scsi_qla_host_t *vha) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_FWI2_CAPABLE(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_STOP_FIRMWARE; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = 5; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| if (mcp->mb[0] == MBS_INVALID_COMMAND) |
| rval = QLA_INVALID_COMMAND; |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_enable_eft_trace(scsi_qla_host_t *vha, dma_addr_t eft_dma, |
| uint16_t buffers) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_FWI2_CAPABLE(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_TRACE_CONTROL; |
| mcp->mb[1] = TC_EFT_ENABLE; |
| mcp->mb[2] = LSW(eft_dma); |
| mcp->mb[3] = MSW(eft_dma); |
| mcp->mb[4] = LSW(MSD(eft_dma)); |
| mcp->mb[5] = MSW(MSD(eft_dma)); |
| mcp->mb[6] = buffers; |
| mcp->mb[7] = TC_AEN_DISABLE; |
| mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_disable_eft_trace(scsi_qla_host_t *vha) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_FWI2_CAPABLE(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_TRACE_CONTROL; |
| mcp->mb[1] = TC_EFT_DISABLE; |
| mcp->out_mb = MBX_1|MBX_0; |
| mcp->in_mb = MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_enable_fce_trace(scsi_qla_host_t *vha, dma_addr_t fce_dma, |
| uint16_t buffers, uint16_t *mb, uint32_t *dwords) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_TRACE_CONTROL; |
| mcp->mb[1] = TC_FCE_ENABLE; |
| mcp->mb[2] = LSW(fce_dma); |
| mcp->mb[3] = MSW(fce_dma); |
| mcp->mb[4] = LSW(MSD(fce_dma)); |
| mcp->mb[5] = MSW(MSD(fce_dma)); |
| mcp->mb[6] = buffers; |
| mcp->mb[7] = TC_AEN_DISABLE; |
| mcp->mb[8] = 0; |
| mcp->mb[9] = TC_FCE_DEFAULT_RX_SIZE; |
| mcp->mb[10] = TC_FCE_DEFAULT_TX_SIZE; |
| mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2| |
| MBX_1|MBX_0; |
| mcp->in_mb = MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| |
| if (mb) |
| memcpy(mb, mcp->mb, 8 * sizeof(*mb)); |
| if (dwords) |
| *dwords = buffers; |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_disable_fce_trace(scsi_qla_host_t *vha, uint64_t *wr, uint64_t *rd) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_FWI2_CAPABLE(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_TRACE_CONTROL; |
| mcp->mb[1] = TC_FCE_DISABLE; |
| mcp->mb[2] = TC_FCE_DISABLE_TRACE; |
| mcp->out_mb = MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_9|MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2| |
| MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| |
| if (wr) |
| *wr = (uint64_t) mcp->mb[5] << 48 | |
| (uint64_t) mcp->mb[4] << 32 | |
| (uint64_t) mcp->mb[3] << 16 | |
| (uint64_t) mcp->mb[2]; |
| if (rd) |
| *rd = (uint64_t) mcp->mb[9] << 48 | |
| (uint64_t) mcp->mb[8] << 32 | |
| (uint64_t) mcp->mb[7] << 16 | |
| (uint64_t) mcp->mb[6]; |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint16_t addr, |
| uint16_t off, uint16_t count) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_FWI2_CAPABLE(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_READ_SFP; |
| mcp->mb[1] = addr; |
| mcp->mb[2] = MSW(sfp_dma); |
| mcp->mb[3] = LSW(sfp_dma); |
| mcp->mb[6] = MSW(MSD(sfp_dma)); |
| mcp->mb[7] = LSW(MSD(sfp_dma)); |
| mcp->mb[8] = count; |
| mcp->mb[9] = off; |
| mcp->mb[10] = 0; |
| mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_set_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id, |
| uint16_t port_speed, uint16_t *mb) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_IIDMA_CAPABLE(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_PORT_PARAMS; |
| mcp->mb[1] = loop_id; |
| mcp->mb[2] = BIT_0; |
| if (IS_QLA81XX(vha->hw)) |
| mcp->mb[3] = port_speed & (BIT_5|BIT_4|BIT_3|BIT_2|BIT_1|BIT_0); |
| else |
| mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0); |
| mcp->mb[9] = vha->vp_idx; |
| mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_3|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| /* Return mailbox statuses. */ |
| if (mb != NULL) { |
| mb[0] = mcp->mb[0]; |
| mb[1] = mcp->mb[1]; |
| mb[3] = mcp->mb[3]; |
| } |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| void |
| qla24xx_report_id_acquisition(scsi_qla_host_t *vha, |
| struct vp_rpt_id_entry_24xx *rptid_entry) |
| { |
| uint8_t vp_idx; |
| uint16_t stat = le16_to_cpu(rptid_entry->vp_idx); |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *vp; |
| scsi_qla_host_t *tvp; |
| |
| if (rptid_entry->entry_status != 0) |
| return; |
| |
| if (rptid_entry->format == 0) { |
| DEBUG15(printk("%s:format 0 : scsi(%ld) number of VPs setup %d," |
| " number of VPs acquired %d\n", __func__, vha->host_no, |
| MSB(le16_to_cpu(rptid_entry->vp_count)), |
| LSB(le16_to_cpu(rptid_entry->vp_count)))); |
| DEBUG15(printk("%s primary port id %02x%02x%02x\n", __func__, |
| rptid_entry->port_id[2], rptid_entry->port_id[1], |
| rptid_entry->port_id[0])); |
| } else if (rptid_entry->format == 1) { |
| vp_idx = LSB(stat); |
| DEBUG15(printk("%s:format 1: scsi(%ld): VP[%d] enabled " |
| "- status %d - " |
| "with port id %02x%02x%02x\n", __func__, vha->host_no, |
| vp_idx, MSB(stat), |
| rptid_entry->port_id[2], rptid_entry->port_id[1], |
| rptid_entry->port_id[0])); |
| if (vp_idx == 0) |
| return; |
| |
| if (MSB(stat) == 1) { |
| DEBUG2(printk("scsi(%ld): Could not acquire ID for " |
| "VP[%d].\n", vha->host_no, vp_idx)); |
| return; |
| } |
| |
| list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) |
| if (vp_idx == vp->vp_idx) |
| break; |
| if (!vp) |
| return; |
| |
| vp->d_id.b.domain = rptid_entry->port_id[2]; |
| vp->d_id.b.area = rptid_entry->port_id[1]; |
| vp->d_id.b.al_pa = rptid_entry->port_id[0]; |
| |
| /* |
| * Cannot configure here as we are still sitting on the |
| * response queue. Handle it in dpc context. |
| */ |
| set_bit(VP_IDX_ACQUIRED, &vp->vp_flags); |
| set_bit(VP_DPC_NEEDED, &vha->dpc_flags); |
| |
| qla2xxx_wake_dpc(vha); |
| } |
| } |
| |
| /* |
| * qla24xx_modify_vp_config |
| * Change VP configuration for vha |
| * |
| * Input: |
| * vha = adapter block pointer. |
| * |
| * Returns: |
| * qla2xxx local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla24xx_modify_vp_config(scsi_qla_host_t *vha) |
| { |
| int rval; |
| struct vp_config_entry_24xx *vpmod; |
| dma_addr_t vpmod_dma; |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| |
| /* This can be called by the parent */ |
| |
| vpmod = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &vpmod_dma); |
| if (!vpmod) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Modify VP " |
| "IOCB.\n", __func__, vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| |
| memset(vpmod, 0, sizeof(struct vp_config_entry_24xx)); |
| vpmod->entry_type = VP_CONFIG_IOCB_TYPE; |
| vpmod->entry_count = 1; |
| vpmod->command = VCT_COMMAND_MOD_ENABLE_VPS; |
| vpmod->vp_count = 1; |
| vpmod->vp_index1 = vha->vp_idx; |
| vpmod->options_idx1 = BIT_3|BIT_4|BIT_5; |
| memcpy(vpmod->node_name_idx1, vha->node_name, WWN_SIZE); |
| memcpy(vpmod->port_name_idx1, vha->port_name, WWN_SIZE); |
| vpmod->entry_count = 1; |
| |
| rval = qla2x00_issue_iocb(base_vha, vpmod, vpmod_dma, 0); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue VP config IOCB" |
| "(%x).\n", __func__, base_vha->host_no, rval)); |
| } else if (vpmod->comp_status != 0) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- error status (%x).\n", __func__, base_vha->host_no, |
| vpmod->comp_status)); |
| rval = QLA_FUNCTION_FAILED; |
| } else if (vpmod->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- completion status (%x).\n", __func__, base_vha->host_no, |
| le16_to_cpu(vpmod->comp_status))); |
| rval = QLA_FUNCTION_FAILED; |
| } else { |
| /* EMPTY */ |
| DEBUG11(printk("%s(%ld): done.\n", __func__, |
| base_vha->host_no)); |
| fc_vport_set_state(vha->fc_vport, FC_VPORT_INITIALIZING); |
| } |
| dma_pool_free(ha->s_dma_pool, vpmod, vpmod_dma); |
| |
| return rval; |
| } |
| |
| /* |
| * qla24xx_control_vp |
| * Enable a virtual port for given host |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * vhba = virtual adapter (unused) |
| * index = index number for enabled VP |
| * |
| * Returns: |
| * qla2xxx local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla24xx_control_vp(scsi_qla_host_t *vha, int cmd) |
| { |
| int rval; |
| int map, pos; |
| struct vp_ctrl_entry_24xx *vce; |
| dma_addr_t vce_dma; |
| struct qla_hw_data *ha = vha->hw; |
| int vp_index = vha->vp_idx; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| |
| DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__, |
| vha->host_no, vp_index)); |
| |
| if (vp_index == 0 || vp_index >= ha->max_npiv_vports) |
| return QLA_PARAMETER_ERROR; |
| |
| vce = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &vce_dma); |
| if (!vce) { |
| DEBUG2_3(printk("%s(%ld): " |
| "failed to allocate VP Control IOCB.\n", __func__, |
| base_vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| memset(vce, 0, sizeof(struct vp_ctrl_entry_24xx)); |
| |
| vce->entry_type = VP_CTRL_IOCB_TYPE; |
| vce->entry_count = 1; |
| vce->command = cpu_to_le16(cmd); |
| vce->vp_count = __constant_cpu_to_le16(1); |
| |
| /* index map in firmware starts with 1; decrement index |
| * this is ok as we never use index 0 |
| */ |
| map = (vp_index - 1) / 8; |
| pos = (vp_index - 1) & 7; |
| mutex_lock(&ha->vport_lock); |
| vce->vp_idx_map[map] |= 1 << pos; |
| mutex_unlock(&ha->vport_lock); |
| |
| rval = qla2x00_issue_iocb(base_vha, vce, vce_dma, 0); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed to issue VP control IOCB" |
| "(%x).\n", __func__, base_vha->host_no, rval)); |
| printk("%s(%ld): failed to issue VP control IOCB" |
| "(%x).\n", __func__, base_vha->host_no, rval); |
| } else if (vce->entry_status != 0) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- error status (%x).\n", __func__, base_vha->host_no, |
| vce->entry_status)); |
| printk("%s(%ld): failed to complete IOCB " |
| "-- error status (%x).\n", __func__, base_vha->host_no, |
| vce->entry_status); |
| rval = QLA_FUNCTION_FAILED; |
| } else if (vce->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { |
| DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " |
| "-- completion status (%x).\n", __func__, base_vha->host_no, |
| le16_to_cpu(vce->comp_status))); |
| printk("%s(%ld): failed to complete IOCB " |
| "-- completion status (%x).\n", __func__, base_vha->host_no, |
| le16_to_cpu(vce->comp_status)); |
| rval = QLA_FUNCTION_FAILED; |
| } else { |
| DEBUG2(printk("%s(%ld): done.\n", __func__, base_vha->host_no)); |
| } |
| |
| dma_pool_free(ha->s_dma_pool, vce, vce_dma); |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_send_change_request |
| * Receive or disable RSCN request from fabric controller |
| * |
| * Input: |
| * ha = adapter block pointer |
| * format = registration format: |
| * 0 - Reserved |
| * 1 - Fabric detected registration |
| * 2 - N_port detected registration |
| * 3 - Full registration |
| * FF - clear registration |
| * vp_idx = Virtual port index |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel Context |
| */ |
| |
| int |
| qla2x00_send_change_request(scsi_qla_host_t *vha, uint16_t format, |
| uint16_t vp_idx) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| /* |
| * This command is implicitly executed by firmware during login for the |
| * physical hosts |
| */ |
| if (vp_idx == 0) |
| return QLA_FUNCTION_FAILED; |
| |
| mcp->mb[0] = MBC_SEND_CHANGE_REQUEST; |
| mcp->mb[1] = format; |
| mcp->mb[9] = vp_idx; |
| mcp->out_mb = MBX_9|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0|MBX_1; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval == QLA_SUCCESS) { |
| if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { |
| rval = BIT_1; |
| } |
| } else |
| rval = BIT_1; |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_dump_ram(scsi_qla_host_t *vha, dma_addr_t req_dma, uint32_t addr, |
| uint32_t size) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| if (MSW(addr) || IS_FWI2_CAPABLE(vha->hw)) { |
| mcp->mb[0] = MBC_DUMP_RISC_RAM_EXTENDED; |
| mcp->mb[8] = MSW(addr); |
| mcp->out_mb = MBX_8|MBX_0; |
| } else { |
| mcp->mb[0] = MBC_DUMP_RISC_RAM; |
| mcp->out_mb = MBX_0; |
| } |
| mcp->mb[1] = LSW(addr); |
| mcp->mb[2] = MSW(req_dma); |
| mcp->mb[3] = LSW(req_dma); |
| mcp->mb[6] = MSW(MSD(req_dma)); |
| mcp->mb[7] = LSW(MSD(req_dma)); |
| mcp->out_mb |= MBX_7|MBX_6|MBX_3|MBX_2|MBX_1; |
| if (IS_FWI2_CAPABLE(vha->hw)) { |
| mcp->mb[4] = MSW(size); |
| mcp->mb[5] = LSW(size); |
| mcp->out_mb |= MBX_5|MBX_4; |
| } else { |
| mcp->mb[4] = LSW(size); |
| mcp->out_mb |= MBX_4; |
| } |
| |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| /* 84XX Support **************************************************************/ |
| |
| struct cs84xx_mgmt_cmd { |
| union { |
| struct verify_chip_entry_84xx req; |
| struct verify_chip_rsp_84xx rsp; |
| } p; |
| }; |
| |
| int |
| qla84xx_verify_chip(struct scsi_qla_host *vha, uint16_t *status) |
| { |
| int rval, retry; |
| struct cs84xx_mgmt_cmd *mn; |
| dma_addr_t mn_dma; |
| uint16_t options; |
| unsigned long flags; |
| struct qla_hw_data *ha = vha->hw; |
| |
| DEBUG16(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mn = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma); |
| if (mn == NULL) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Verify ISP84XX " |
| "IOCB.\n", __func__, vha->host_no)); |
| return QLA_MEMORY_ALLOC_FAILED; |
| } |
| |
| /* Force Update? */ |
| options = ha->cs84xx->fw_update ? VCO_FORCE_UPDATE : 0; |
| /* Diagnostic firmware? */ |
| /* options |= MENLO_DIAG_FW; */ |
| /* We update the firmware with only one data sequence. */ |
| options |= VCO_END_OF_DATA; |
| |
| do { |
| retry = 0; |
| memset(mn, 0, sizeof(*mn)); |
| mn->p.req.entry_type = VERIFY_CHIP_IOCB_TYPE; |
| mn->p.req.entry_count = 1; |
| mn->p.req.options = cpu_to_le16(options); |
| |
| DEBUG16(printk("%s(%ld): Dump of Verify Request.\n", __func__, |
| vha->host_no)); |
| DEBUG16(qla2x00_dump_buffer((uint8_t *)mn, |
| sizeof(*mn))); |
| |
| rval = qla2x00_issue_iocb_timeout(vha, mn, mn_dma, 0, 120); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_16(printk("%s(%ld): failed to issue Verify " |
| "IOCB (%x).\n", __func__, vha->host_no, rval)); |
| goto verify_done; |
| } |
| |
| DEBUG16(printk("%s(%ld): Dump of Verify Response.\n", __func__, |
| vha->host_no)); |
| DEBUG16(qla2x00_dump_buffer((uint8_t *)mn, |
| sizeof(*mn))); |
| |
| status[0] = le16_to_cpu(mn->p.rsp.comp_status); |
| status[1] = status[0] == CS_VCS_CHIP_FAILURE ? |
| le16_to_cpu(mn->p.rsp.failure_code) : 0; |
| DEBUG2_16(printk("%s(%ld): cs=%x fc=%x\n", __func__, |
| vha->host_no, status[0], status[1])); |
| |
| if (status[0] != CS_COMPLETE) { |
| rval = QLA_FUNCTION_FAILED; |
| if (!(options & VCO_DONT_UPDATE_FW)) { |
| DEBUG2_16(printk("%s(%ld): Firmware update " |
| "failed. Retrying without update " |
| "firmware.\n", __func__, vha->host_no)); |
| options |= VCO_DONT_UPDATE_FW; |
| options &= ~VCO_FORCE_UPDATE; |
| retry = 1; |
| } |
| } else { |
| DEBUG2_16(printk("%s(%ld): firmware updated to %x.\n", |
| __func__, vha->host_no, |
| le32_to_cpu(mn->p.rsp.fw_ver))); |
| |
| /* NOTE: we only update OP firmware. */ |
| spin_lock_irqsave(&ha->cs84xx->access_lock, flags); |
| ha->cs84xx->op_fw_version = |
| le32_to_cpu(mn->p.rsp.fw_ver); |
| spin_unlock_irqrestore(&ha->cs84xx->access_lock, |
| flags); |
| } |
| } while (retry); |
| |
| verify_done: |
| dma_pool_free(ha->s_dma_pool, mn, mn_dma); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_16(printk("%s(%ld): failed=%x.\n", __func__, |
| vha->host_no, rval)); |
| } else { |
| DEBUG16(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req) |
| { |
| int rval; |
| unsigned long flags; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| struct device_reg_25xxmq __iomem *reg; |
| struct qla_hw_data *ha = vha->hw; |
| |
| mcp->mb[0] = MBC_INITIALIZE_MULTIQ; |
| mcp->mb[1] = req->options; |
| mcp->mb[2] = MSW(LSD(req->dma)); |
| mcp->mb[3] = LSW(LSD(req->dma)); |
| mcp->mb[6] = MSW(MSD(req->dma)); |
| mcp->mb[7] = LSW(MSD(req->dma)); |
| mcp->mb[5] = req->length; |
| if (req->rsp) |
| mcp->mb[10] = req->rsp->id; |
| mcp->mb[12] = req->qos; |
| mcp->mb[11] = req->vp_idx; |
| mcp->mb[13] = req->rid; |
| |
| reg = (struct device_reg_25xxmq *)((void *)(ha->mqiobase) + |
| QLA_QUE_PAGE * req->id); |
| |
| mcp->mb[4] = req->id; |
| /* que in ptr index */ |
| mcp->mb[8] = 0; |
| /* que out ptr index */ |
| mcp->mb[9] = 0; |
| mcp->out_mb = MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8|MBX_7| |
| MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->flags = MBX_DMA_OUT; |
| mcp->tov = 60; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| if (!(req->options & BIT_0)) { |
| WRT_REG_DWORD(®->req_q_in, 0); |
| WRT_REG_DWORD(®->req_q_out, 0); |
| } |
| req->req_q_in = ®->req_q_in; |
| req->req_q_out = ®->req_q_out; |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) |
| DEBUG2_3_11(printk(KERN_WARNING "%s(%ld): failed=%x mb0=%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0])); |
| return rval; |
| } |
| |
| int |
| qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) |
| { |
| int rval; |
| unsigned long flags; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| struct device_reg_25xxmq __iomem *reg; |
| struct qla_hw_data *ha = vha->hw; |
| |
| mcp->mb[0] = MBC_INITIALIZE_MULTIQ; |
| mcp->mb[1] = rsp->options; |
| mcp->mb[2] = MSW(LSD(rsp->dma)); |
| mcp->mb[3] = LSW(LSD(rsp->dma)); |
| mcp->mb[6] = MSW(MSD(rsp->dma)); |
| mcp->mb[7] = LSW(MSD(rsp->dma)); |
| mcp->mb[5] = rsp->length; |
| mcp->mb[14] = rsp->msix->entry; |
| mcp->mb[13] = rsp->rid; |
| |
| reg = (struct device_reg_25xxmq *)((void *)(ha->mqiobase) + |
| QLA_QUE_PAGE * rsp->id); |
| |
| mcp->mb[4] = rsp->id; |
| /* que in ptr index */ |
| mcp->mb[8] = 0; |
| /* que out ptr index */ |
| mcp->mb[9] = 0; |
| mcp->out_mb = MBX_14|MBX_13|MBX_9|MBX_8|MBX_7 |
| |MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->flags = MBX_DMA_OUT; |
| mcp->tov = 60; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| if (!(rsp->options & BIT_0)) { |
| WRT_REG_DWORD(®->rsp_q_out, 0); |
| WRT_REG_DWORD(®->rsp_q_in, 0); |
| } |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) |
| DEBUG2_3_11(printk(KERN_WARNING "%s(%ld): failed=%x " |
| "mb0=%x.\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| return rval; |
| } |
| |
| int |
| qla81xx_idc_ack(scsi_qla_host_t *vha, uint16_t *mb) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_IDC_ACK; |
| memcpy(&mcp->mb[1], mb, QLA_IDC_ACK_REGS * sizeof(uint16_t)); |
| mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla81xx_fac_get_sector_size(scsi_qla_host_t *vha, uint32_t *sector_size) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_QLA81XX(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_FLASH_ACCESS_CTRL; |
| mcp->mb[1] = FAC_OPT_CMD_GET_SECTOR_SIZE; |
| mcp->out_mb = MBX_1|MBX_0; |
| mcp->in_mb = MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| *sector_size = mcp->mb[1]; |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla81xx_fac_do_write_enable(scsi_qla_host_t *vha, int enable) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_QLA81XX(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_FLASH_ACCESS_CTRL; |
| mcp->mb[1] = enable ? FAC_OPT_CMD_WRITE_ENABLE : |
| FAC_OPT_CMD_WRITE_PROTECT; |
| mcp->out_mb = MBX_1|MBX_0; |
| mcp->in_mb = MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla81xx_fac_erase_sector(scsi_qla_host_t *vha, uint32_t start, uint32_t finish) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_QLA81XX(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_FLASH_ACCESS_CTRL; |
| mcp->mb[1] = FAC_OPT_CMD_ERASE_SECTOR; |
| mcp->mb[2] = LSW(start); |
| mcp->mb[3] = MSW(start); |
| mcp->mb[4] = LSW(finish); |
| mcp->mb[5] = MSW(finish); |
| mcp->out_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x " |
| "mb[2]=%x.\n", __func__, vha->host_no, rval, mcp->mb[0], |
| mcp->mb[1], mcp->mb[2])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla81xx_restart_mpi_firmware(scsi_qla_host_t *vha) |
| { |
| int rval = 0; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_RESTART_MPI_FW; |
| mcp->out_mb = MBX_0; |
| mcp->in_mb = MBX_0|MBX_1; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x mb[1]=0x%x.\n", |
| __func__, vha->host_no, rval, mcp->mb[0], mcp->mb[1])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr, |
| dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_READ_SFP; |
| mcp->mb[1] = dev; |
| mcp->mb[2] = MSW(sfp_dma); |
| mcp->mb[3] = LSW(sfp_dma); |
| mcp->mb[6] = MSW(MSD(sfp_dma)); |
| mcp->mb[7] = LSW(MSD(sfp_dma)); |
| mcp->mb[8] = len; |
| mcp->mb[9] = adr; |
| mcp->mb[10] = opt; |
| mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (opt & BIT_0) |
| if (sfp) |
| *sfp = mcp->mb[8]; |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr, |
| dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| if (opt & BIT_0) |
| if (sfp) |
| len = *sfp; |
| |
| mcp->mb[0] = MBC_WRITE_SFP; |
| mcp->mb[1] = dev; |
| mcp->mb[2] = MSW(sfp_dma); |
| mcp->mb[3] = LSW(sfp_dma); |
| mcp->mb[6] = MSW(MSD(sfp_dma)); |
| mcp->mb[7] = LSW(MSD(sfp_dma)); |
| mcp->mb[8] = len; |
| mcp->mb[9] = adr; |
| mcp->mb[10] = opt; |
| mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_get_xgmac_stats(scsi_qla_host_t *vha, dma_addr_t stats_dma, |
| uint16_t size_in_bytes, uint16_t *actual_size) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_QLA81XX(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_XGMAC_STATS; |
| mcp->mb[2] = MSW(stats_dma); |
| mcp->mb[3] = LSW(stats_dma); |
| mcp->mb[6] = MSW(MSD(stats_dma)); |
| mcp->mb[7] = LSW(MSD(stats_dma)); |
| mcp->mb[8] = size_in_bytes >> 2; |
| mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; |
| mcp->in_mb = MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x " |
| "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval, |
| mcp->mb[0], mcp->mb[1], mcp->mb[2])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| |
| *actual_size = mcp->mb[2] << 2; |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_get_dcbx_params(scsi_qla_host_t *vha, dma_addr_t tlv_dma, |
| uint16_t size) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_QLA81XX(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_GET_DCBX_PARAMS; |
| mcp->mb[1] = 0; |
| mcp->mb[2] = MSW(tlv_dma); |
| mcp->mb[3] = LSW(tlv_dma); |
| mcp->mb[6] = MSW(MSD(tlv_dma)); |
| mcp->mb[7] = LSW(MSD(tlv_dma)); |
| mcp->mb[8] = size; |
| mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_2|MBX_1|MBX_0; |
| mcp->tov = MBX_TOV_SECONDS; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x " |
| "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval, |
| mcp->mb[0], mcp->mb[1], mcp->mb[2])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_FWI2_CAPABLE(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_READ_RAM_EXTENDED; |
| mcp->mb[1] = LSW(risc_addr); |
| mcp->mb[8] = MSW(risc_addr); |
| mcp->out_mb = MBX_8|MBX_1|MBX_0; |
| mcp->in_mb = MBX_3|MBX_2|MBX_0; |
| mcp->tov = 30; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| *data = mcp->mb[3] << 16 | mcp->mb[2]; |
| } |
| |
| return rval; |
| } |
| |
| int |
| qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data) |
| { |
| int rval; |
| mbx_cmd_t mc; |
| mbx_cmd_t *mcp = &mc; |
| |
| if (!IS_FWI2_CAPABLE(vha->hw)) |
| return QLA_FUNCTION_FAILED; |
| |
| DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); |
| |
| mcp->mb[0] = MBC_WRITE_RAM_WORD_EXTENDED; |
| mcp->mb[1] = LSW(risc_addr); |
| mcp->mb[2] = LSW(data); |
| mcp->mb[3] = MSW(data); |
| mcp->mb[8] = MSW(risc_addr); |
| mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0; |
| mcp->in_mb = MBX_0; |
| mcp->tov = 30; |
| mcp->flags = 0; |
| rval = qla2x00_mailbox_command(vha, mcp); |
| if (rval != QLA_SUCCESS) { |
| DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__, |
| vha->host_no, rval, mcp->mb[0])); |
| } else { |
| DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); |
| } |
| |
| return rval; |
| } |