| |
| * Qualcomm Technologies Inc. SSDK Driver. |
| |
| Add missing DT bindings documentation for 8337 ethernet switch. |
| |
| Required properties: |
| - compatible: Should be "qcom,ess-switch-qca83xx" |
| - qcom,switch-access-mode: Should be "mdio" or "local bus" |
| - qcom,link-intr-gpio: Link interrupt number used by switch |
| - qcom,switch-cpu-bmp: Switch cpu port bitmap |
| - qcom,switch-lan-bmp: Switch lan port bitmap |
| - qcom,switch-wan-bmp: Switch wan port bitmap |
| - qcom,ar8327-initvals: Initial qca83xx configuration |
| |
| Optional: |
| - qcom,link-polling-required: Boolean- Present if using polling for link check |
| |
| Example: |
| |
| ess-switch@0 { |
| compatible = "qcom,ess-switch-qca83xx"; |
| qcom,switch-access-mode = "mdio"; |
| qcom,ar8327-initvals = < |
| 0x00004 0x7600000 /* PAD0_MODE */ |
| 0x00008 0x0 /* PAD5_MODE */ |
| 0x000e4 0xaa545 /* MAC_POWER_SEL */ |
| 0x000e0 0xc74164de /* SGMII_CTRL */ |
| 0x0007c 0x4e /* PORT0_STATUS */ |
| 0x00094 0x4e /* PORT6_STATUS */ |
| >; |
| qcom,link-intr-gpio = <84>; |
| qcom,switch-cpu-bmp = <0x01>; /* cpu port bitmap */ |
| qcom,switch-lan-bmp = <0x3e>; /* lan port bitmap */ |
| qcom,switch-wan-bmp = <0x0>; /* wan port bitmap */ |
| }; |