arch/powerpc/sysdev/qe_lib/qe.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <gridish@freescale.com>
  * 		Li Yang <leoli@freescale.com>
  * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
  *
  * Description:
  * General Purpose functions for the global management of the
  * QUICC Engine (QE).
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/immap_qe.h>
 #include <asm/qe.h>
 #include <asm/prom.h>
 #include <asm/rheap.h>

 static void qe_snums_init(void);
 static void qe_muram_init(void);
 static int qe_sdma_init(void);

 static DEFINE_SPINLOCK(qe_lock);

 /* QE snum state */
 enum qe_snum_state {
 	QE_SNUM_STATE_USED,
 	QE_SNUM_STATE_FREE
 };

 /* QE snum */
 struct qe_snum {
 	u8 num;
 	enum qe_snum_state state;
 };

 /* We allocate this here because it is used almost exclusively for
  * the communication processor devices.
  */
 struct qe_immap *qe_immr = NULL;
 EXPORT_SYMBOL(qe_immr);

 static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */

 static phys_addr_t qebase = -1;

 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;

 	if (qebase != -1)
 		return qebase;

 	qe = of_find_node_by_type(NULL, "qe");
 	if (qe) {
 		unsigned int size;
 		const void *prop = of_get_property(qe, "reg", &size);
 		qebase = of_translate_address(qe, prop);
 		of_node_put(qe);
 	};

 	return qebase;
 }

 EXPORT_SYMBOL(get_qe_base);

 void qe_reset(void)
 {
 	if (qe_immr == NULL)
 		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);

 	qe_snums_init();

 	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
 		     QE_CR_PROTOCOL_UNSPECIFIED, 0);

 	/* Reclaim the MURAM memory for our use. */
 	qe_muram_init();

 	if (qe_sdma_init())
 		panic("sdma init failed!");
 }

 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 {
 	unsigned long flags;
 	u8 mcn_shift = 0, dev_shift = 0;

 	spin_lock_irqsave(&qe_lock, flags);
 	if (cmd == QE_RESET) {
 		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
 	} else {
 		if (cmd == QE_ASSIGN_PAGE) {
 			/* Here device is the SNUM, not sub-block */
 			dev_shift = QE_CR_SNUM_SHIFT;
 		} else if (cmd == QE_ASSIGN_RISC) {
 			/* Here device is the SNUM, and mcnProtocol is
 			 * e_QeCmdRiscAssignment value */
 			dev_shift = QE_CR_SNUM_SHIFT;
 			mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
 		} else {
 			if (device == QE_CR_SUBBLOCK_USB)
 				mcn_shift = QE_CR_MCN_USB_SHIFT;
 			else
 				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
 		}

 		out_be32(&qe_immr->cp.cecdr, cmd_input);
 		out_be32(&qe_immr->cp.cecr,
 			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
 			  mcn_protocol << mcn_shift));
 	}

 	/* wait for the QE_CR_FLG to clear */
 	while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
 		cpu_relax();
 	spin_unlock_irqrestore(&qe_lock, flags);

 	return 0;
 }
 EXPORT_SYMBOL(qe_issue_cmd);

 /* Set a baud rate generator. This needs lots of work. There are
  * 16 BRGs, which can be connected to the QE channels or output
  * as clocks. The BRGs are in two different block of internal
  * memory mapped space.
  * The baud rate clock is the system clock divided by something.
  * It was set up long ago during the initial boot phase and is
  * is given to us.
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers). Documentation uses 1-based numbering.
  */
 static unsigned int brg_clk = 0;

 unsigned int get_brg_clk(void)
 {
 	struct device_node *qe;
 	if (brg_clk)
 		return brg_clk;

 	qe = of_find_node_by_type(NULL, "qe");
 	if (qe) {
 		unsigned int size;
 		const u32 *prop = of_get_property(qe, "brg-frequency", &size);
 		brg_clk = *prop;
 		of_node_put(qe);
 	};
 	return brg_clk;
 }

 /* This function is used by UARTS, or anything else that uses a 16x
  * oversampled clock.
  */
 void qe_setbrg(u32 brg, u32 rate)
 {
 	volatile u32 *bp;
 	u32 divisor, tempval;
 	int div16 = 0;

 	bp = &qe_immr->brg.brgc[brg];

 	divisor = (get_brg_clk() / rate);
 	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
 		div16 = 1;
 		divisor /= 16;
 	}

 	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
 	if (div16)
 		tempval |= QE_BRGC_DIV16;

 	out_be32(bp, tempval);
 }

 /* Initialize SNUMs (thread serial numbers) according to
  * QE Module Control chapter, SNUM table
  */
 static void qe_snums_init(void)
 {
 	int i;
 	static const u8 snum_init[] = {
 		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
 		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
 		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
 		0xD8, 0xD9, 0xE8, 0xE9,
 	};

 	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
 		snums[i].num = snum_init[i];
 		snums[i].state = QE_SNUM_STATE_FREE;
 	}
 }

 int qe_get_snum(void)
 {
 	unsigned long flags;
 	int snum = -EBUSY;
 	int i;

 	spin_lock_irqsave(&qe_lock, flags);
 	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
 		if (snums[i].state == QE_SNUM_STATE_FREE) {
 			snums[i].state = QE_SNUM_STATE_USED;
 			snum = snums[i].num;
 			break;
 		}
 	}
 	spin_unlock_irqrestore(&qe_lock, flags);

 	return snum;
 }
 EXPORT_SYMBOL(qe_get_snum);

 void qe_put_snum(u8 snum)
 {
 	int i;

 	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
 		if (snums[i].num == snum) {
 			snums[i].state = QE_SNUM_STATE_FREE;
 			break;
 		}
 	}
 }
 EXPORT_SYMBOL(qe_put_snum);

 static int qe_sdma_init(void)
 {
 	struct sdma *sdma = &qe_immr->sdma;
 	unsigned long sdma_buf_offset;

 	if (!sdma)
 		return -ENODEV;

 	/* allocate 2 internal temporary buffers (512 bytes size each) for
 	 * the SDMA */
  	sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
 	if (IS_ERR_VALUE(sdma_buf_offset))
 		return -ENOMEM;

 	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
  	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
  					(0x1 << QE_SDMR_CEN_SHIFT)));

 	return 0;
 }

 /*
  * muram_alloc / muram_free bits.
  */
 static DEFINE_SPINLOCK(qe_muram_lock);

 /* 16 blocks should be enough to satisfy all requests
  * until the memory subsystem goes up... */
 static rh_block_t qe_boot_muram_rh_block[16];
 static rh_info_t qe_muram_info;

 static void qe_muram_init(void)
 {
 	struct device_node *np;
 	u32 address;
 	u64 size;
 	unsigned int flags;

 	/* initialize the info header */
 	rh_init(&qe_muram_info, 1,
 		sizeof(qe_boot_muram_rh_block) /
 		sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);

 	/* Attach the usable muram area */
 	/* XXX: This is a subset of the available muram. It
 	 * varies with the processor and the microcode patches activated.
 	 */
 	if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
 		address = *of_get_address(np, 0, &size, &flags);
 		of_node_put(np);
 		rh_attach_region(&qe_muram_info, address, (int) size);
 	}
 }

 /* This function returns an index into the MURAM area.
  */
 unsigned long qe_muram_alloc(int size, int align)
 {
 	unsigned long start;
 	unsigned long flags;

 	spin_lock_irqsave(&qe_muram_lock, flags);
 	start = rh_alloc_align(&qe_muram_info, size, align, "QE");
 	spin_unlock_irqrestore(&qe_muram_lock, flags);

 	return start;
 }
 EXPORT_SYMBOL(qe_muram_alloc);

 int qe_muram_free(unsigned long offset)
 {
 	int ret;
 	unsigned long flags;

 	spin_lock_irqsave(&qe_muram_lock, flags);
 	ret = rh_free(&qe_muram_info, offset);
 	spin_unlock_irqrestore(&qe_muram_lock, flags);

 	return ret;
 }
 EXPORT_SYMBOL(qe_muram_free);

 /* not sure if this is ever needed */
 unsigned long qe_muram_alloc_fixed(unsigned long offset, int size)
 {
 	unsigned long start;
 	unsigned long flags;

 	spin_lock_irqsave(&qe_muram_lock, flags);
 	start = rh_alloc_fixed(&qe_muram_info, offset, size, "commproc");
 	spin_unlock_irqrestore(&qe_muram_lock, flags);

 	return start;
 }
 EXPORT_SYMBOL(qe_muram_alloc_fixed);

 void qe_muram_dump(void)
 {
 	rh_dump(&qe_muram_info);
 }
 EXPORT_SYMBOL(qe_muram_dump);

 void *qe_muram_addr(unsigned long offset)
 {
 	return (void *)&qe_immr->muram[offset];
 }
 EXPORT_SYMBOL(qe_muram_addr);
	/*
	* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
	*
	* Authors: Shlomi Gridish <gridish@freescale.com>
	* Li Yang <leoli@freescale.com>
	* Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
	*
	* Description:
	* General Purpose functions for the global management of the
	* QUICC Engine (QE).
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/
	#include <linux/errno.h>
	#include <linux/sched.h>
	#include <linux/kernel.h>
	#include <linux/param.h>
	#include <linux/string.h>
	#include <linux/mm.h>
	#include <linux/interrupt.h>
	#include <linux/bootmem.h>
	#include <linux/module.h>
	#include <linux/delay.h>
	#include <linux/ioport.h>
	#include <asm/irq.h>
	#include <asm/page.h>
	#include <asm/pgtable.h>
	#include <asm/immap_qe.h>
	#include <asm/qe.h>
	#include <asm/prom.h>
	#include <asm/rheap.h>

	static void qe_snums_init(void);
	static void qe_muram_init(void);
	static int qe_sdma_init(void);

	static DEFINE_SPINLOCK(qe_lock);

	/* QE snum state */
	enum qe_snum_state {
	QE_SNUM_STATE_USED,
	QE_SNUM_STATE_FREE
	};

	/* QE snum */
	struct qe_snum {
	u8 num;
	enum qe_snum_state state;
	};

	/* We allocate this here because it is used almost exclusively for
	* the communication processor devices.
	*/
	struct qe_immap *qe_immr = NULL;
	EXPORT_SYMBOL(qe_immr);

	static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */

	static phys_addr_t qebase = -1;

	phys_addr_t get_qe_base(void)
	{
	struct device_node *qe;

	if (qebase != -1)
	return qebase;

	qe = of_find_node_by_type(NULL, "qe");
	if (qe) {
	unsigned int size;
	const void *prop = of_get_property(qe, "reg", &size);
	qebase = of_translate_address(qe, prop);
	of_node_put(qe);
	};

	return qebase;
	}

	EXPORT_SYMBOL(get_qe_base);

	void qe_reset(void)
	{
	if (qe_immr == NULL)
	qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);

	qe_snums_init();

	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
	QE_CR_PROTOCOL_UNSPECIFIED, 0);

	/* Reclaim the MURAM memory for our use. */
	qe_muram_init();

	if (qe_sdma_init())
	panic("sdma init failed!");
	}

	int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
	{
	unsigned long flags;
	u8 mcn_shift = 0, dev_shift = 0;

	spin_lock_irqsave(&qe_lock, flags);
	if (cmd == QE_RESET) {
	out_be32(&qe_immr->cp.cecr, (u32) (cmd \| QE_CR_FLG));
	} else {
	if (cmd == QE_ASSIGN_PAGE) {
	/* Here device is the SNUM, not sub-block */
	dev_shift = QE_CR_SNUM_SHIFT;
	} else if (cmd == QE_ASSIGN_RISC) {
	/* Here device is the SNUM, and mcnProtocol is
	* e_QeCmdRiscAssignment value */
	dev_shift = QE_CR_SNUM_SHIFT;
	mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
	} else {
	if (device == QE_CR_SUBBLOCK_USB)
	mcn_shift = QE_CR_MCN_USB_SHIFT;
	else
	mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
	}

	out_be32(&qe_immr->cp.cecdr, cmd_input);
	out_be32(&qe_immr->cp.cecr,
	(cmd \| QE_CR_FLG \| ((u32) device << dev_shift) \| (u32)
	mcn_protocol << mcn_shift));
	}

	/* wait for the QE_CR_FLG to clear */
	while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
	cpu_relax();
	spin_unlock_irqrestore(&qe_lock, flags);

	return 0;
	}
	EXPORT_SYMBOL(qe_issue_cmd);

	/* Set a baud rate generator. This needs lots of work. There are
	* 16 BRGs, which can be connected to the QE channels or output
	* as clocks. The BRGs are in two different block of internal
	* memory mapped space.
	* The baud rate clock is the system clock divided by something.
	* It was set up long ago during the initial boot phase and is
	* is given to us.
	* Baud rate clocks are zero-based in the driver code (as that maps
	* to port numbers). Documentation uses 1-based numbering.
	*/
	static unsigned int brg_clk = 0;

	unsigned int get_brg_clk(void)
	{
	struct device_node *qe;
	if (brg_clk)
	return brg_clk;

	qe = of_find_node_by_type(NULL, "qe");
	if (qe) {
	unsigned int size;
	const u32 *prop = of_get_property(qe, "brg-frequency", &size);
	brg_clk = *prop;
	of_node_put(qe);
	};
	return brg_clk;
	}

	/* This function is used by UARTS, or anything else that uses a 16x
	* oversampled clock.
	*/
	void qe_setbrg(u32 brg, u32 rate)
	{
	volatile u32 *bp;
	u32 divisor, tempval;
	int div16 = 0;

	bp = &qe_immr->brg.brgc[brg];

	divisor = (get_brg_clk() / rate);
	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
	div16 = 1;
	divisor /= 16;
	}

	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) \| QE_BRGC_ENABLE;
	if (div16)
	tempval \|= QE_BRGC_DIV16;

	out_be32(bp, tempval);
	}

	/* Initialize SNUMs (thread serial numbers) according to
	* QE Module Control chapter, SNUM table
	*/
	static void qe_snums_init(void)
	{
	int i;
	static const u8 snum_init[] = {
	0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
	0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
	0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
	0xD8, 0xD9, 0xE8, 0xE9,
	};

	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
	snums[i].num = snum_init[i];
	snums[i].state = QE_SNUM_STATE_FREE;
	}
	}

	int qe_get_snum(void)
	{
	unsigned long flags;
	int snum = -EBUSY;
	int i;

	spin_lock_irqsave(&qe_lock, flags);
	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
	if (snums[i].state == QE_SNUM_STATE_FREE) {
	snums[i].state = QE_SNUM_STATE_USED;
	snum = snums[i].num;
	break;
	}
	}
	spin_unlock_irqrestore(&qe_lock, flags);

	return snum;
	}
	EXPORT_SYMBOL(qe_get_snum);

	void qe_put_snum(u8 snum)
	{
	int i;

	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
	if (snums[i].num == snum) {
	snums[i].state = QE_SNUM_STATE_FREE;
	break;
	}
	}
	}
	EXPORT_SYMBOL(qe_put_snum);

	static int qe_sdma_init(void)
	{
	struct sdma *sdma = &qe_immr->sdma;
	unsigned long sdma_buf_offset;

	if (!sdma)
	return -ENODEV;

	/* allocate 2 internal temporary buffers (512 bytes size each) for
	* the SDMA */
	sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
	if (IS_ERR_VALUE(sdma_buf_offset))
	return -ENOMEM;

	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK \|
	(0x1 << QE_SDMR_CEN_SHIFT)));

	return 0;
	}

	/*
	* muram_alloc / muram_free bits.
	*/
	static DEFINE_SPINLOCK(qe_muram_lock);

	/* 16 blocks should be enough to satisfy all requests
	* until the memory subsystem goes up... */
	static rh_block_t qe_boot_muram_rh_block[16];
	static rh_info_t qe_muram_info;

	static void qe_muram_init(void)
	{
	struct device_node *np;
	u32 address;
	u64 size;
	unsigned int flags;

	/* initialize the info header */
	rh_init(&qe_muram_info, 1,
	sizeof(qe_boot_muram_rh_block) /
	sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);

	/* Attach the usable muram area */
	/* XXX: This is a subset of the available muram. It
	* varies with the processor and the microcode patches activated.
	*/
	if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
	address = *of_get_address(np, 0, &size, &flags);
	of_node_put(np);
	rh_attach_region(&qe_muram_info, address, (int) size);
	}
	}

	/* This function returns an index into the MURAM area.
	*/
	unsigned long qe_muram_alloc(int size, int align)
	{
	unsigned long start;
	unsigned long flags;

	spin_lock_irqsave(&qe_muram_lock, flags);
	start = rh_alloc_align(&qe_muram_info, size, align, "QE");
	spin_unlock_irqrestore(&qe_muram_lock, flags);

	return start;
	}
	EXPORT_SYMBOL(qe_muram_alloc);

	int qe_muram_free(unsigned long offset)
	{
	int ret;
	unsigned long flags;

	spin_lock_irqsave(&qe_muram_lock, flags);
	ret = rh_free(&qe_muram_info, offset);
	spin_unlock_irqrestore(&qe_muram_lock, flags);

	return ret;
	}
	EXPORT_SYMBOL(qe_muram_free);

	/* not sure if this is ever needed */
	unsigned long qe_muram_alloc_fixed(unsigned long offset, int size)
	{
	unsigned long start;
	unsigned long flags;

	spin_lock_irqsave(&qe_muram_lock, flags);
	start = rh_alloc_fixed(&qe_muram_info, offset, size, "commproc");
	spin_unlock_irqrestore(&qe_muram_lock, flags);

	return start;
	}
	EXPORT_SYMBOL(qe_muram_alloc_fixed);

	void qe_muram_dump(void)
	{
	rh_dump(&qe_muram_info);
	}
	EXPORT_SYMBOL(qe_muram_dump);

	void *qe_muram_addr(unsigned long offset)
	{
	return (void *)&qe_immr->muram[offset];
	}
	EXPORT_SYMBOL(qe_muram_addr);