| /* |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <mach/regs-pmu.h> |
| #include <mach/regs-usb-phy.h> |
| #include <plat/cpu.h> |
| #include <plat/usb-phy.h> |
| |
| static atomic_t host_usage; |
| |
| static int exynos4_usb_host_phy_is_on(void) |
| { |
| return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1; |
| } |
| |
| static void exynos4210_usb_phy_clkset(struct platform_device *pdev) |
| { |
| struct clk *xusbxti_clk; |
| u32 phyclk; |
| |
| xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); |
| if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { |
| if (soc_is_exynos4210()) { |
| /* set clock frequency for PLL */ |
| phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4210_CLKSEL_MASK; |
| |
| switch (clk_get_rate(xusbxti_clk)) { |
| case 12 * MHZ: |
| phyclk |= EXYNOS4210_CLKSEL_12M; |
| break; |
| case 48 * MHZ: |
| phyclk |= EXYNOS4210_CLKSEL_48M; |
| break; |
| default: |
| case 24 * MHZ: |
| phyclk |= EXYNOS4210_CLKSEL_24M; |
| break; |
| } |
| writel(phyclk, EXYNOS4_PHYCLK); |
| } else if (soc_is_exynos4212() || soc_is_exynos4412()) { |
| /* set clock frequency for PLL */ |
| phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4X12_CLKSEL_MASK; |
| |
| switch (clk_get_rate(xusbxti_clk)) { |
| case 9600 * KHZ: |
| phyclk |= EXYNOS4X12_CLKSEL_9600K; |
| break; |
| case 10 * MHZ: |
| phyclk |= EXYNOS4X12_CLKSEL_10M; |
| break; |
| case 12 * MHZ: |
| phyclk |= EXYNOS4X12_CLKSEL_12M; |
| break; |
| case 19200 * KHZ: |
| phyclk |= EXYNOS4X12_CLKSEL_19200K; |
| break; |
| case 20 * MHZ: |
| phyclk |= EXYNOS4X12_CLKSEL_20M; |
| break; |
| default: |
| case 24 * MHZ: |
| /* default reference clock */ |
| phyclk |= EXYNOS4X12_CLKSEL_24M; |
| break; |
| } |
| writel(phyclk, EXYNOS4_PHYCLK); |
| } |
| clk_put(xusbxti_clk); |
| } |
| } |
| |
| static int exynos4210_usb_phy0_init(struct platform_device *pdev) |
| { |
| u32 rstcon; |
| |
| writel(readl(S5P_USBDEVICE_PHY_CONTROL) | S5P_USBDEVICE_PHY_ENABLE, |
| S5P_USBDEVICE_PHY_CONTROL); |
| |
| exynos4210_usb_phy_clkset(pdev); |
| |
| /* set to normal PHY0 */ |
| writel((readl(EXYNOS4_PHYPWR) & ~PHY0_NORMAL_MASK), EXYNOS4_PHYPWR); |
| |
| /* reset PHY0 and Link */ |
| rstcon = readl(EXYNOS4_RSTCON) | PHY0_SWRST_MASK; |
| writel(rstcon, EXYNOS4_RSTCON); |
| udelay(10); |
| |
| rstcon &= ~PHY0_SWRST_MASK; |
| writel(rstcon, EXYNOS4_RSTCON); |
| |
| return 0; |
| } |
| |
| static int exynos4210_usb_phy0_exit(struct platform_device *pdev) |
| { |
| writel((readl(EXYNOS4_PHYPWR) | PHY0_ANALOG_POWERDOWN | |
| PHY0_OTG_DISABLE), EXYNOS4_PHYPWR); |
| |
| writel(readl(S5P_USBDEVICE_PHY_CONTROL) & ~S5P_USBDEVICE_PHY_ENABLE, |
| S5P_USBDEVICE_PHY_CONTROL); |
| |
| return 0; |
| } |
| |
| static int exynos4210_usb_phy1_init(struct platform_device *pdev) |
| { |
| struct clk *otg_clk; |
| u32 rstcon; |
| int err; |
| |
| atomic_inc(&host_usage); |
| |
| otg_clk = clk_get(&pdev->dev, "otg"); |
| if (IS_ERR(otg_clk)) { |
| dev_err(&pdev->dev, "Failed to get otg clock\n"); |
| return PTR_ERR(otg_clk); |
| } |
| |
| err = clk_enable(otg_clk); |
| if (err) { |
| clk_put(otg_clk); |
| return err; |
| } |
| |
| if (exynos4_usb_host_phy_is_on()) |
| return 0; |
| |
| writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE, |
| S5P_USBHOST_PHY_CONTROL); |
| |
| exynos4210_usb_phy_clkset(pdev); |
| |
| /* floating prevention logic: disable */ |
| writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON); |
| |
| /* set to normal HSIC 0 and 1 of PHY1 */ |
| writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK), |
| EXYNOS4_PHYPWR); |
| |
| /* set to normal standard USB of PHY1 */ |
| writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR); |
| |
| /* reset all ports of both PHY and Link */ |
| rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK | |
| PHY1_SWRST_MASK; |
| writel(rstcon, EXYNOS4_RSTCON); |
| udelay(10); |
| |
| rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); |
| writel(rstcon, EXYNOS4_RSTCON); |
| udelay(80); |
| |
| clk_disable(otg_clk); |
| clk_put(otg_clk); |
| |
| return 0; |
| } |
| |
| static int exynos4210_usb_phy1_exit(struct platform_device *pdev) |
| { |
| struct clk *otg_clk; |
| int err; |
| |
| if (atomic_dec_return(&host_usage) > 0) |
| return 0; |
| |
| otg_clk = clk_get(&pdev->dev, "otg"); |
| if (IS_ERR(otg_clk)) { |
| dev_err(&pdev->dev, "Failed to get otg clock\n"); |
| return PTR_ERR(otg_clk); |
| } |
| |
| err = clk_enable(otg_clk); |
| if (err) { |
| clk_put(otg_clk); |
| return err; |
| } |
| |
| writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN), |
| EXYNOS4_PHYPWR); |
| |
| writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE, |
| S5P_USBHOST_PHY_CONTROL); |
| |
| clk_disable(otg_clk); |
| clk_put(otg_clk); |
| |
| return 0; |
| } |
| |
| int s5p_usb_phy_init(struct platform_device *pdev, int type) |
| { |
| if (type == S5P_USB_PHY_DEVICE) |
| return exynos4210_usb_phy0_init(pdev); |
| else if (type == S5P_USB_PHY_HOST) |
| return exynos4210_usb_phy1_init(pdev); |
| |
| return -EINVAL; |
| } |
| |
| int s5p_usb_phy_exit(struct platform_device *pdev, int type) |
| { |
| if (type == S5P_USB_PHY_DEVICE) |
| return exynos4210_usb_phy0_exit(pdev); |
| else if (type == S5P_USB_PHY_HOST) |
| return exynos4210_usb_phy1_exit(pdev); |
| |
| return -EINVAL; |
| } |