EISA: Use dev_printk() when possible
Use dev_printk() when possible to make messages more useful.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c
index 806c77b..0b06df4 100644
--- a/drivers/eisa/eisa-bus.c
+++ b/drivers/eisa/eisa-bus.c
@@ -314,22 +314,22 @@
{
int i, c;
struct eisa_device *edev;
+ char *enabled_str;
- printk(KERN_INFO "EISA: Probing bus %d at %s\n",
- root->bus_nr, dev_name(root->dev));
+ dev_info(root->dev, "Probing EISA bus %d\n", root->bus_nr);
/* First try to get hold of slot 0. If there is no device
* here, simply fail, unless root->force_probe is set. */
edev = kzalloc(sizeof(*edev), GFP_KERNEL);
if (!edev) {
- printk(KERN_ERR "EISA: Couldn't allocate mainboard slot\n");
+ dev_err(root->dev, "EISA: Couldn't allocate mainboard slot\n");
return -ENOMEM;
}
if (eisa_request_resources(root, edev, 0)) {
- printk(KERN_WARNING \
- "EISA: Cannot allocate resource for mainboard\n");
+ dev_warn(root->dev,
+ "EISA: Cannot allocate resource for mainboard\n");
kfree(edev);
if (!root->force_probe)
return -EBUSY;
@@ -344,11 +344,11 @@
goto force_probe;
}
- printk(KERN_INFO "EISA: Mainboard %s detected.\n", edev->id.sig);
+ dev_info(&edev->dev, "EISA: Mainboard %s detected\n", edev->id.sig);
if (eisa_register_device(edev)) {
- printk(KERN_ERR "EISA: Failed to register %s\n",
- edev->id.sig);
+ dev_err(&edev->dev, "EISA: Failed to register %s\n",
+ edev->id.sig);
eisa_release_resources(edev);
kfree(edev);
}
@@ -358,14 +358,15 @@
for (c = 0, i = 1; i <= root->slots; i++) {
edev = kzalloc(sizeof(*edev), GFP_KERNEL);
if (!edev) {
- printk(KERN_ERR "EISA: Out of memory for slot %d\n", i);
+ dev_err(root->dev, "EISA: Out of memory for slot %d\n",
+ i);
continue;
}
if (eisa_request_resources(root, edev, i)) {
- printk(KERN_WARNING \
- "Cannot allocate resource for EISA slot %d\n",
- i);
+ dev_warn(root->dev,
+ "Cannot allocate resource for EISA slot %d\n",
+ i);
kfree(edev);
continue;
}
@@ -375,38 +376,30 @@
kfree(edev);
continue;
}
-
- printk(KERN_INFO "EISA: slot %d : %s detected",
- i, edev->id.sig);
-
- switch (edev->state) {
- case EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED:
- printk(" (forced enabled)");
- break;
- case EISA_CONFIG_FORCED:
- printk(" (forced disabled)");
- break;
+ if (edev->state == (EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED))
+ enabled_str = " (forced enabled)";
+ else if (edev->state == EISA_CONFIG_FORCED)
+ enabled_str = " (forced disabled)";
+ else if (edev->state == 0)
+ enabled_str = " (disabled)";
+ else
+ enabled_str = "";
- case 0:
- printk(" (disabled)");
- break;
- }
-
- printk (".\n");
+ dev_info(&edev->dev, "EISA: slot %d: %s detected%s\n", i,
+ edev->id.sig, enabled_str);
c++;
if (eisa_register_device(edev)) {
- printk(KERN_ERR "EISA: Failed to register %s\n",
- edev->id.sig);
+ dev_err(&edev->dev, "EISA: Failed to register %s\n",
+ edev->id.sig);
eisa_release_resources(edev);
kfree(edev);
}
}
- printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s");
-
+ dev_info(root->dev, "EISA: Detected %d card%s\n", c, c == 1 ? "" : "s");
return 0;
}
diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c
index cdae207..0d42ea7 100644
--- a/drivers/eisa/pci_eisa.c
+++ b/drivers/eisa/pci_eisa.c
@@ -25,8 +25,7 @@
int rc;
if ((rc = pci_enable_device (pdev))) {
- printk (KERN_ERR "pci_eisa : Could not enable device %s\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "Could not enable device\n");
return rc;
}
@@ -38,7 +37,7 @@
dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
if (eisa_root_register (&pci_eisa_root)) {
- printk (KERN_ERR "pci_eisa : Could not register EISA root\n");
+ dev_err(&pdev->dev, "Could not register EISA root\n");
return -1;
}