arch/m68k/atari/config.c - kernel/msm-4.9 - Gitiles

 /*
  *  linux/arch/m68k/atari/config.c
  *
  *  Copyright (C) 1994 Bjoern Brauel
  *
  *  5/2/94 Roman Hodek:
  *    Added setting of time_adj to get a better clock.
  *
  *  5/14/94 Roman Hodek:
  *    gettod() for TT
  *
  *  5/15/94 Roman Hodek:
  *    hard_reset_now() for Atari (and others?)
  *
  *  94/12/30 Andreas Schwab:
  *    atari_sched_init fixed to get precise clock.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
  */

 /*
  * Miscellaneous atari stuff
  */

 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/vt_kern.h>
 #include <linux/module.h>

 #include <asm/bootinfo.h>
 #include <asm/setup.h>
 #include <asm/atarihw.h>
 #include <asm/atariints.h>
 #include <asm/atari_stram.h>
 #include <asm/system.h>
 #include <asm/machdep.h>
 #include <asm/hwtest.h>
 #include <asm/io.h>

 u_long atari_mch_cookie;
 EXPORT_SYMBOL(atari_mch_cookie);

 u_long atari_mch_type;
 EXPORT_SYMBOL(atari_mch_type);

 struct atari_hw_present atari_hw_present;
 EXPORT_SYMBOL(atari_hw_present);

 u_long atari_switches;
 EXPORT_SYMBOL(atari_switches);

 int atari_dont_touch_floppy_select;
 EXPORT_SYMBOL(atari_dont_touch_floppy_select);

 int atari_rtc_year_offset;

 /* local function prototypes */
 static void atari_reset(void);
 static void atari_get_model(char *model);
 static void atari_get_hardware_list(struct seq_file *m);

 /* atari specific irq functions */
 extern void atari_init_IRQ (void);
 extern void atari_mksound(unsigned int count, unsigned int ticks);
 #ifdef CONFIG_HEARTBEAT
 static void atari_heartbeat(int on);
 #endif

 /* atari specific timer functions (in time.c) */
 extern void atari_sched_init(irq_handler_t);
 extern unsigned long atari_gettimeoffset (void);
 extern int atari_mste_hwclk (int, struct rtc_time *);
 extern int atari_tt_hwclk (int, struct rtc_time *);
 extern int atari_mste_set_clock_mmss (unsigned long);
 extern int atari_tt_set_clock_mmss (unsigned long);


 /* ++roman: This is a more elaborate test for an SCC chip, since the plain
  * Medusa board generates DTACK at the SCC's standard addresses, but a SCC
  * board in the Medusa is possible. Also, the addresses where the ST_ESCC
  * resides generate DTACK without the chip, too.
  * The method is to write values into the interrupt vector register, that
  * should be readable without trouble (from channel A!).
  */

 static int __init scc_test(volatile char *ctla)
 {
 	if (!hwreg_present(ctla))
 		return 0;
 	MFPDELAY();

 	*ctla = 2;
 	MFPDELAY();
 	*ctla = 0x40;
 	MFPDELAY();

 	*ctla = 2;
 	MFPDELAY();
 	if (*ctla != 0x40)
 		return 0;
 	MFPDELAY();

 	*ctla = 2;
 	MFPDELAY();
 	*ctla = 0x60;
 	MFPDELAY();

 	*ctla = 2;
 	MFPDELAY();
 	if (*ctla != 0x60)
 		return 0;

 	return 1;
 }


     /*
      *  Parse an Atari-specific record in the bootinfo
      */

 int __init atari_parse_bootinfo(const struct bi_record *record)
 {
 	int unknown = 0;
 	const u_long *data = record->data;

 	switch (record->tag) {
 	case BI_ATARI_MCH_COOKIE:
 		atari_mch_cookie = *data;
 		break;
 	case BI_ATARI_MCH_TYPE:
 		atari_mch_type = *data;
 		break;
 	default:
 		unknown = 1;
 		break;
 	}
 	return unknown;
 }


 /* Parse the Atari-specific switches= option. */
 static int __init atari_switches_setup(char *str)
 {
 	char switches[strlen(str) + 1];
 	char *p;
 	int ovsc_shift;
 	char *args = switches;

 	if (!MACH_IS_ATARI)
 		return 0;

 	/* copy string to local array, strsep works destructively... */
 	strcpy(switches, str);
 	atari_switches = 0;

 	/* parse the options */
 	while ((p = strsep(&args, ",")) != NULL) {
 		if (!*p)
 			continue;
 		ovsc_shift = 0;
 		if (strncmp(p, "ov_", 3) == 0) {
 			p += 3;
 			ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
 		}

 		if (strcmp(p, "ikbd") == 0) {
 			/* RTS line of IKBD ACIA */
 			atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
 		} else if (strcmp(p, "midi") == 0) {
 			/* RTS line of MIDI ACIA */
 			atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
 		} else if (strcmp(p, "snd6") == 0) {
 			atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
 		} else if (strcmp(p, "snd7") == 0) {
 			atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
 		}
 	}
 	return 0;
 }

 early_param("switches", atari_switches_setup);


     /*
      *  Setup the Atari configuration info
      */

 void __init config_atari(void)
 {
 	unsigned short tos_version;

 	memset(&atari_hw_present, 0, sizeof(atari_hw_present));

 	/* Change size of I/O space from 64KB to 4GB. */
 	ioport_resource.end  = 0xFFFFFFFF;

 	mach_sched_init      = atari_sched_init;
 	mach_init_IRQ        = atari_init_IRQ;
 	mach_get_model	 = atari_get_model;
 	mach_get_hardware_list = atari_get_hardware_list;
 	mach_gettimeoffset   = atari_gettimeoffset;
 	mach_reset           = atari_reset;
 	mach_max_dma_address = 0xffffff;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
 	mach_beep          = atari_mksound;
 #endif
 #ifdef CONFIG_HEARTBEAT
 	mach_heartbeat = atari_heartbeat;
 #endif

 	/* Set switches as requested by the user */
 	if (atari_switches & ATARI_SWITCH_IKBD)
 		acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
 	if (atari_switches & ATARI_SWITCH_MIDI)
 		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
 	if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
 		sound_ym.rd_data_reg_sel = 14;
 		sound_ym.wd_data = sound_ym.rd_data_reg_sel |
 				   ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
 				   ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
 	}

 	/* ++bjoern:
 	 * Determine hardware present
 	 */

 	printk("Atari hardware found: ");
 	if (MACH_IS_MEDUSA) {
 		/* There's no Atari video hardware on the Medusa, but all the
 		 * addresses below generate a DTACK so no bus error occurs! */
 	} else if (hwreg_present(f030_xreg)) {
 		ATARIHW_SET(VIDEL_SHIFTER);
 		printk("VIDEL ");
 		/* This is a temporary hack: If there is Falcon video
 		 * hardware, we assume that the ST-DMA serves SCSI instead of
 		 * ACSI. In the future, there should be a better method for
 		 * this...
 		 */
 		ATARIHW_SET(ST_SCSI);
 		printk("STDMA-SCSI ");
 	} else if (hwreg_present(tt_palette)) {
 		ATARIHW_SET(TT_SHIFTER);
 		printk("TT_SHIFTER ");
 	} else if (hwreg_present(&shifter.bas_hi)) {
 		if (hwreg_present(&shifter.bas_lo) &&
 		    (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
 			ATARIHW_SET(EXTD_SHIFTER);
 			printk("EXTD_SHIFTER ");
 		} else {
 			ATARIHW_SET(STND_SHIFTER);
 			printk("STND_SHIFTER ");
 		}
 	}
 	if (hwreg_present(&st_mfp.par_dt_reg)) {
 		ATARIHW_SET(ST_MFP);
 		printk("ST_MFP ");
 	}
 	if (hwreg_present(&tt_mfp.par_dt_reg)) {
 		ATARIHW_SET(TT_MFP);
 		printk("TT_MFP ");
 	}
 	if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
 		ATARIHW_SET(SCSI_DMA);
 		printk("TT_SCSI_DMA ");
 	}
 	/*
 	 * The ST-DMA address registers aren't readable
 	 * on all Medusas, so the test below may fail
 	 */
 	if (MACH_IS_MEDUSA ||
 	    (hwreg_present(&st_dma.dma_vhi) &&
 	     (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
 	     st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
 	     (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
 	     st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
 		ATARIHW_SET(EXTD_DMA);
 		printk("EXTD_DMA ");
 	}
 	if (hwreg_present(&tt_scsi.scsi_data)) {
 		ATARIHW_SET(TT_SCSI);
 		printk("TT_SCSI ");
 	}
 	if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
 		ATARIHW_SET(YM_2149);
 		printk("YM2149 ");
 	}
 	if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
 		ATARIHW_SET(PCM_8BIT);
 		printk("PCM ");
 	}
 	if (hwreg_present(&falcon_codec.unused5)) {
 		ATARIHW_SET(CODEC);
 		printk("CODEC ");
 	}
 	if (hwreg_present(&dsp56k_host_interface.icr)) {
 		ATARIHW_SET(DSP56K);
 		printk("DSP56K ");
 	}
 	if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
 #if 0
 	    /* This test sucks! Who knows some better? */
 	    (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
 	    (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
 #else
 	    !MACH_IS_MEDUSA
 #endif
 	    ) {
 		ATARIHW_SET(SCC_DMA);
 		printk("SCC_DMA ");
 	}
 	if (scc_test(&atari_scc.cha_a_ctrl)) {
 		ATARIHW_SET(SCC);
 		printk("SCC ");
 	}
 	if (scc_test(&st_escc.cha_b_ctrl)) {
 		ATARIHW_SET(ST_ESCC);
 		printk("ST_ESCC ");
 	}
 	if (hwreg_present(&tt_scu.sys_mask)) {
 		ATARIHW_SET(SCU);
 		/* Assume a VME bus if there's a SCU */
 		ATARIHW_SET(VME);
 		printk("VME SCU ");
 	}
 	if (hwreg_present((void *)(0xffff9210))) {
 		ATARIHW_SET(ANALOG_JOY);
 		printk("ANALOG_JOY ");
 	}
 	if (hwreg_present(blitter.halftone)) {
 		ATARIHW_SET(BLITTER);
 		printk("BLITTER ");
 	}
 	if (hwreg_present((void *)0xfff00039)) {
 		ATARIHW_SET(IDE);
 		printk("IDE ");
 	}
 #if 1 /* This maybe wrong */
 	if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
 	    hwreg_present(&tt_microwire.mask) &&
 	    (tt_microwire.mask = 0x7ff,
 	     udelay(1),
 	     tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
 	     udelay(1),
 	     tt_microwire.data != 0)) {
 		ATARIHW_SET(MICROWIRE);
 		while (tt_microwire.mask != 0x7ff)
 			;
 		printk("MICROWIRE ");
 	}
 #endif
 	if (hwreg_present(&tt_rtc.regsel)) {
 		ATARIHW_SET(TT_CLK);
 		printk("TT_CLK ");
 		mach_hwclk = atari_tt_hwclk;
 		mach_set_clock_mmss = atari_tt_set_clock_mmss;
 	}
 	if (hwreg_present(&mste_rtc.sec_ones)) {
 		ATARIHW_SET(MSTE_CLK);
 		printk("MSTE_CLK ");
 		mach_hwclk = atari_mste_hwclk;
 		mach_set_clock_mmss = atari_mste_set_clock_mmss;
 	}
 	if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
 	    hwreg_write(&dma_wd.fdc_speed, 0)) {
 		ATARIHW_SET(FDCSPEED);
 		printk("FDC_SPEED ");
 	}
 	if (!ATARIHW_PRESENT(ST_SCSI)) {
 		ATARIHW_SET(ACSI);
 		printk("ACSI ");
 	}
 	printk("\n");

 	if (CPU_IS_040_OR_060)
 		/* Now it seems to be safe to turn of the tt0 transparent
 		 * translation (the one that must not be turned off in
 		 * head.S...)
 		 */
 		asm volatile ("\n"
 			"	moveq	#0,%%d0\n"
 			"	.chip	68040\n"
 			"	movec	%%d0,%%itt0\n"
 			"	movec	%%d0,%%dtt0\n"
 			"	.chip	68k"
 			: /* no outputs */
 			: /* no inputs */
 			: "d0");

 	/* allocator for memory that must reside in st-ram */
 	atari_stram_init();

 	/* Set up a mapping for the VMEbus address region:
 	 *
 	 * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
 	 * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
 	 * 0xfe000000 virt., because this can be done with a single
 	 * transparent translation. On the 68040, lots of often unused
 	 * page tables would be needed otherwise. On a MegaSTE or similar,
 	 * the highest byte is stripped off by hardware due to the 24 bit
 	 * design of the bus.
 	 */

 	if (CPU_IS_020_OR_030) {
 		unsigned long tt1_val;
 		tt1_val = 0xfe008543;	/* Translate 0xfexxxxxx, enable, cache
 					 * inhibit, read and write, FDC mask = 3,
 					 * FDC val = 4 -> Supervisor only */
 		asm volatile ("\n"
 			"	.chip	68030\n"
 			"	pmove	%0@,%/tt1\n"
 			"	.chip	68k"
 			: : "a" (&tt1_val));
 	} else {
 	        asm volatile ("\n"
 			"	.chip	68040\n"
 			"	movec	%0,%%itt1\n"
 			"	movec	%0,%%dtt1\n"
 			"	.chip	68k"
 			:
 			: "d" (0xfe00a040));	/* Translate 0xfexxxxxx, enable,
 						 * supervisor only, non-cacheable/
 						 * serialized, writable */

 	}

 	/* Fetch tos version at Physical 2 */
 	/*
 	 * We my not be able to access this address if the kernel is
 	 * loaded to st ram, since the first page is unmapped.  On the
 	 * Medusa this is always the case and there is nothing we can do
 	 * about this, so we just assume the smaller offset.  For the TT
 	 * we use the fact that in head.S we have set up a mapping
 	 * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
 	 * in the last 16MB of the address space.
 	 */
 	tos_version = (MACH_IS_MEDUSA) ?
 			0xfff : *(unsigned short *)0xff000002;
 	atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
 }

 #ifdef CONFIG_HEARTBEAT
 static void atari_heartbeat(int on)
 {
 	unsigned char tmp;
 	unsigned long flags;

 	if (atari_dont_touch_floppy_select)
 		return;

 	local_irq_save(flags);
 	sound_ym.rd_data_reg_sel = 14;	/* Select PSG Port A */
 	tmp = sound_ym.rd_data_reg_sel;
 	sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
 	local_irq_restore(flags);
 }
 #endif

 /* ++roman:
  *
  * This function does a reset on machines that lack the ability to
  * assert the processor's _RESET signal somehow via hardware. It is
  * based on the fact that you can find the initial SP and PC values
  * after a reset at physical addresses 0 and 4. This works pretty well
  * for Atari machines, since the lowest 8 bytes of physical memory are
  * really ROM (mapped by hardware). For other 680x0 machines: don't
  * know if it works...
  *
  * To get the values at addresses 0 and 4, the MMU better is turned
  * off first. After that, we have to jump into physical address space
  * (the PC before the pmove statement points to the virtual address of
  * the code). Getting that physical address is not hard, but the code
  * becomes a bit complex since I've tried to ensure that the jump
  * statement after the pmove is in the cache already (otherwise the
  * processor can't fetch it!). For that, the code first jumps to the
  * jump statement with the (virtual) address of the pmove section in
  * an address register . The jump statement is surely in the cache
  * now. After that, that physical address of the reset code is loaded
  * into the same address register, pmove is done and the same jump
  * statements goes to the reset code. Since there are not many
  * statements between the two jumps, I hope it stays in the cache.
  *
  * The C code makes heavy use of the GCC features that you can get the
  * address of a C label. No hope to compile this with another compiler
  * than GCC!
  */

 /* ++andreas: no need for complicated code, just depend on prefetch */

 static void atari_reset(void)
 {
 	long tc_val = 0;
 	long reset_addr;

 	/*
 	 * On the Medusa, phys. 0x4 may contain garbage because it's no
 	 * ROM.  See above for explanation why we cannot use PTOV(4).
 	 */
 	reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
 		     *(unsigned long *) 0xff000004;

 	/* reset ACIA for switch off OverScan, if it's active */
 	if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
 		acia.key_ctrl = ACIA_RESET;
 	if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
 		acia.mid_ctrl = ACIA_RESET;

 	/* processor independent: turn off interrupts and reset the VBR;
 	 * the caches must be left enabled, else prefetching the final jump
 	 * instruction doesn't work.
 	 */
 	local_irq_disable();
 	asm volatile ("movec	%0,%%vbr"
 			: : "d" (0));

 	if (CPU_IS_040_OR_060) {
 		unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
 		if (CPU_IS_060) {
 			/* 68060: clear PCR to turn off superscalar operation */
 			asm volatile ("\n"
 				"	.chip 68060\n"
 				"	movec %0,%%pcr\n"
 				"	.chip 68k"
 				: : "d" (0));
 		}

 		asm volatile ("\n"
 			"	move.l	%0,%%d0\n"
 			"	and.l	#0xff000000,%%d0\n"
 			"	or.w	#0xe020,%%d0\n"   /* map 16 MB, enable, cacheable */
 			"	.chip	68040\n"
 			"	movec	%%d0,%%itt0\n"
 			"	movec	%%d0,%%dtt0\n"
 			"	.chip	68k\n"
 			"	jmp	%0@"
 			: : "a" (jmp_addr040)
 			: "d0");
 	jmp_addr_label040:
 		asm volatile ("\n"
 			"	moveq	#0,%%d0\n"
 			"	nop\n"
 			"	.chip	68040\n"
 			"	cinva	%%bc\n"
 			"	nop\n"
 			"	pflusha\n"
 			"	nop\n"
 			"	movec	%%d0,%%tc\n"
 			"	nop\n"
 			/* the following setup of transparent translations is needed on the
 			 * Afterburner040 to successfully reboot. Other machines shouldn't
 			 * care about a different tt regs setup, they also didn't care in
 			 * the past that the regs weren't turned off. */
 			"	move.l	#0xffc000,%%d0\n" /* whole insn space cacheable */
 			"	movec	%%d0,%%itt0\n"
 			"	movec	%%d0,%%itt1\n"
 			"	or.w	#0x40,%/d0\n" /* whole data space non-cacheable/ser. */
 			"	movec	%%d0,%%dtt0\n"
 			"	movec	%%d0,%%dtt1\n"
 			"	.chip	68k\n"
 			"	jmp	%0@"
 			: /* no outputs */
 			: "a" (reset_addr)
 			: "d0");
 	} else
 		asm volatile ("\n"
 			"	pmove	%0@,%%tc\n"
 			"	jmp	%1@"
 			: /* no outputs */
 			: "a" (&tc_val), "a" (reset_addr));
 }


 static void atari_get_model(char *model)
 {
 	strcpy(model, "Atari ");
 	switch (atari_mch_cookie >> 16) {
 	case ATARI_MCH_ST:
 		if (ATARIHW_PRESENT(MSTE_CLK))
 			strcat(model, "Mega ST");
 		else
 			strcat(model, "ST");
 		break;
 	case ATARI_MCH_STE:
 		if (MACH_IS_MSTE)
 			strcat(model, "Mega STE");
 		else
 			strcat(model, "STE");
 		break;
 	case ATARI_MCH_TT:
 		if (MACH_IS_MEDUSA)
 			/* Medusa has TT _MCH cookie */
 			strcat(model, "Medusa");
 		else
 			strcat(model, "TT");
 		break;
 	case ATARI_MCH_FALCON:
 		strcat(model, "Falcon");
 		if (MACH_IS_AB40)
 			strcat(model, " (with Afterburner040)");
 		break;
 	default:
 		sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
 			atari_mch_cookie);
 		break;
 	}
 }


 static void atari_get_hardware_list(struct seq_file *m)
 {
 	int i;

 	for (i = 0; i < m68k_num_memory; i++)
 		seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
 				m68k_memory[i].size >> 20, m68k_memory[i].addr,
 				(m68k_memory[i].addr & 0xff000000 ?
 				 "alternate RAM" : "ST-RAM"));

 #define ATARIHW_ANNOUNCE(name, str)			\
 	if (ATARIHW_PRESENT(name))			\
 		seq_printf(m, "\t%s\n", str)

 	seq_printf(m, "Detected hardware:\n");
 	ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
 	ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
 	ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
 	ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
 	ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
 	ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
 	ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
 	ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
 	ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
 	ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
 	ATARIHW_ANNOUNCE(IDE, "IDE Interface");
 	ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
 	ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
 	ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
 	ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
 	ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
 	ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
 	ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
 	ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
 	ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
 	ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
 	ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
 	ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
 	ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
 	ATARIHW_ANNOUNCE(SCU, "System Control Unit");
 	ATARIHW_ANNOUNCE(BLITTER, "Blitter");
 	ATARIHW_ANNOUNCE(VME, "VME Bus");
 	ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
 }
	/*
	* linux/arch/m68k/atari/config.c
	*
	* Copyright (C) 1994 Bjoern Brauel
	*
	* 5/2/94 Roman Hodek:
	* Added setting of time_adj to get a better clock.
	*
	* 5/14/94 Roman Hodek:
	* gettod() for TT
	*
	* 5/15/94 Roman Hodek:
	* hard_reset_now() for Atari (and others?)
	*
	* 94/12/30 Andreas Schwab:
	* atari_sched_init fixed to get precise clock.
	*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file COPYING in the main directory of this archive
	* for more details.
	*/

	/*
	* Miscellaneous atari stuff
	*/

	#include <linux/types.h>
	#include <linux/mm.h>
	#include <linux/seq_file.h>
	#include <linux/console.h>
	#include <linux/init.h>
	#include <linux/delay.h>
	#include <linux/ioport.h>
	#include <linux/vt_kern.h>
	#include <linux/module.h>

	#include <asm/bootinfo.h>
	#include <asm/setup.h>
	#include <asm/atarihw.h>
	#include <asm/atariints.h>
	#include <asm/atari_stram.h>
	#include <asm/system.h>
	#include <asm/machdep.h>
	#include <asm/hwtest.h>
	#include <asm/io.h>

	u_long atari_mch_cookie;
	EXPORT_SYMBOL(atari_mch_cookie);

	u_long atari_mch_type;
	EXPORT_SYMBOL(atari_mch_type);

	struct atari_hw_present atari_hw_present;
	EXPORT_SYMBOL(atari_hw_present);

	u_long atari_switches;
	EXPORT_SYMBOL(atari_switches);

	int atari_dont_touch_floppy_select;
	EXPORT_SYMBOL(atari_dont_touch_floppy_select);

	int atari_rtc_year_offset;

	/* local function prototypes */
	static void atari_reset(void);
	static void atari_get_model(char *model);
	static void atari_get_hardware_list(struct seq_file *m);

	/* atari specific irq functions */
	extern void atari_init_IRQ (void);
	extern void atari_mksound(unsigned int count, unsigned int ticks);
	#ifdef CONFIG_HEARTBEAT
	static void atari_heartbeat(int on);
	#endif

	/* atari specific timer functions (in time.c) */
	extern void atari_sched_init(irq_handler_t);
	extern unsigned long atari_gettimeoffset (void);
	extern int atari_mste_hwclk (int, struct rtc_time *);
	extern int atari_tt_hwclk (int, struct rtc_time *);
	extern int atari_mste_set_clock_mmss (unsigned long);
	extern int atari_tt_set_clock_mmss (unsigned long);


	/* ++roman: This is a more elaborate test for an SCC chip, since the plain
	* Medusa board generates DTACK at the SCC's standard addresses, but a SCC
	* board in the Medusa is possible. Also, the addresses where the ST_ESCC
	* resides generate DTACK without the chip, too.
	* The method is to write values into the interrupt vector register, that
	* should be readable without trouble (from channel A!).
	*/

	static int __init scc_test(volatile char *ctla)
	{
	if (!hwreg_present(ctla))
	return 0;
	MFPDELAY();

	*ctla = 2;
	MFPDELAY();
	*ctla = 0x40;
	MFPDELAY();

	*ctla = 2;
	MFPDELAY();
	if (*ctla != 0x40)
	return 0;
	MFPDELAY();

	*ctla = 2;
	MFPDELAY();
	*ctla = 0x60;
	MFPDELAY();

	*ctla = 2;
	MFPDELAY();
	if (*ctla != 0x60)
	return 0;

	return 1;
	}


	/*
	* Parse an Atari-specific record in the bootinfo
	*/

	int __init atari_parse_bootinfo(const struct bi_record *record)
	{
	int unknown = 0;
	const u_long *data = record->data;

	switch (record->tag) {
	case BI_ATARI_MCH_COOKIE:
	atari_mch_cookie = *data;
	break;
	case BI_ATARI_MCH_TYPE:
	atari_mch_type = *data;
	break;
	default:
	unknown = 1;
	break;
	}
	return unknown;
	}


	/* Parse the Atari-specific switches= option. */
	static int __init atari_switches_setup(char *str)
	{
	char switches[strlen(str) + 1];
	char *p;
	int ovsc_shift;
	char *args = switches;

	if (!MACH_IS_ATARI)
	return 0;

	/* copy string to local array, strsep works destructively... */
	strcpy(switches, str);
	atari_switches = 0;

	/* parse the options */
	while ((p = strsep(&args, ",")) != NULL) {
	if (!*p)
	continue;
	ovsc_shift = 0;
	if (strncmp(p, "ov_", 3) == 0) {
	p += 3;
	ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
	}

	if (strcmp(p, "ikbd") == 0) {
	/* RTS line of IKBD ACIA */
	atari_switches \|= ATARI_SWITCH_IKBD << ovsc_shift;
	} else if (strcmp(p, "midi") == 0) {
	/* RTS line of MIDI ACIA */
	atari_switches \|= ATARI_SWITCH_MIDI << ovsc_shift;
	} else if (strcmp(p, "snd6") == 0) {
	atari_switches \|= ATARI_SWITCH_SND6 << ovsc_shift;
	} else if (strcmp(p, "snd7") == 0) {
	atari_switches \|= ATARI_SWITCH_SND7 << ovsc_shift;
	}
	}
	return 0;
	}

	early_param("switches", atari_switches_setup);


	/*
	* Setup the Atari configuration info
	*/

	void __init config_atari(void)
	{
	unsigned short tos_version;

	memset(&atari_hw_present, 0, sizeof(atari_hw_present));

	/* Change size of I/O space from 64KB to 4GB. */
	ioport_resource.end = 0xFFFFFFFF;

	mach_sched_init = atari_sched_init;
	mach_init_IRQ = atari_init_IRQ;
	mach_get_model = atari_get_model;
	mach_get_hardware_list = atari_get_hardware_list;
	mach_gettimeoffset = atari_gettimeoffset;
	mach_reset = atari_reset;
	mach_max_dma_address = 0xffffff;
	#if defined(CONFIG_INPUT_M68K_BEEP) \|\| defined(CONFIG_INPUT_M68K_BEEP_MODULE)
	mach_beep = atari_mksound;
	#endif
	#ifdef CONFIG_HEARTBEAT
	mach_heartbeat = atari_heartbeat;
	#endif

	/* Set switches as requested by the user */
	if (atari_switches & ATARI_SWITCH_IKBD)
	acia.key_ctrl = ACIA_DIV64 \| ACIA_D8N1S \| ACIA_RHTID;
	if (atari_switches & ATARI_SWITCH_MIDI)
	acia.mid_ctrl = ACIA_DIV16 \| ACIA_D8N1S \| ACIA_RHTID;
	if (atari_switches & (ATARI_SWITCH_SND6\|ATARI_SWITCH_SND7)) {
	sound_ym.rd_data_reg_sel = 14;
	sound_ym.wd_data = sound_ym.rd_data_reg_sel \|
	((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) \|
	((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
	}

	/* ++bjoern:
	* Determine hardware present
	*/

	printk("Atari hardware found: ");
	if (MACH_IS_MEDUSA) {
	/* There's no Atari video hardware on the Medusa, but all the
	* addresses below generate a DTACK so no bus error occurs! */
	} else if (hwreg_present(f030_xreg)) {
	ATARIHW_SET(VIDEL_SHIFTER);
	printk("VIDEL ");
	/* This is a temporary hack: If there is Falcon video
	* hardware, we assume that the ST-DMA serves SCSI instead of
	* ACSI. In the future, there should be a better method for
	* this...
	*/
	ATARIHW_SET(ST_SCSI);
	printk("STDMA-SCSI ");
	} else if (hwreg_present(tt_palette)) {
	ATARIHW_SET(TT_SHIFTER);
	printk("TT_SHIFTER ");
	} else if (hwreg_present(&shifter.bas_hi)) {
	if (hwreg_present(&shifter.bas_lo) &&
	(shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
	ATARIHW_SET(EXTD_SHIFTER);
	printk("EXTD_SHIFTER ");
	} else {
	ATARIHW_SET(STND_SHIFTER);
	printk("STND_SHIFTER ");
	}
	}
	if (hwreg_present(&st_mfp.par_dt_reg)) {
	ATARIHW_SET(ST_MFP);
	printk("ST_MFP ");
	}
	if (hwreg_present(&tt_mfp.par_dt_reg)) {
	ATARIHW_SET(TT_MFP);
	printk("TT_MFP ");
	}
	if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
	ATARIHW_SET(SCSI_DMA);
	printk("TT_SCSI_DMA ");
	}
	/*
	* The ST-DMA address registers aren't readable
	* on all Medusas, so the test below may fail
	*/
	if (MACH_IS_MEDUSA \|\|
	(hwreg_present(&st_dma.dma_vhi) &&
	(st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
	st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
	(st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
	st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
	ATARIHW_SET(EXTD_DMA);
	printk("EXTD_DMA ");
	}
	if (hwreg_present(&tt_scsi.scsi_data)) {
	ATARIHW_SET(TT_SCSI);
	printk("TT_SCSI ");
	}
	if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
	ATARIHW_SET(YM_2149);
	printk("YM2149 ");
	}
	if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
	ATARIHW_SET(PCM_8BIT);
	printk("PCM ");
	}
	if (hwreg_present(&falcon_codec.unused5)) {
	ATARIHW_SET(CODEC);
	printk("CODEC ");
	}
	if (hwreg_present(&dsp56k_host_interface.icr)) {
	ATARIHW_SET(DSP56K);
	printk("DSP56K ");
	}
	if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
	#if 0
	/* This test sucks! Who knows some better? */
	(tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
	(tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
	#else
	!MACH_IS_MEDUSA
	#endif
	) {
	ATARIHW_SET(SCC_DMA);
	printk("SCC_DMA ");
	}
	if (scc_test(&atari_scc.cha_a_ctrl)) {
	ATARIHW_SET(SCC);
	printk("SCC ");
	}
	if (scc_test(&st_escc.cha_b_ctrl)) {
	ATARIHW_SET(ST_ESCC);
	printk("ST_ESCC ");
	}
	if (hwreg_present(&tt_scu.sys_mask)) {
	ATARIHW_SET(SCU);
	/* Assume a VME bus if there's a SCU */
	ATARIHW_SET(VME);
	printk("VME SCU ");
	}
	if (hwreg_present((void *)(0xffff9210))) {
	ATARIHW_SET(ANALOG_JOY);
	printk("ANALOG_JOY ");
	}
	if (hwreg_present(blitter.halftone)) {
	ATARIHW_SET(BLITTER);
	printk("BLITTER ");
	}
	if (hwreg_present((void *)0xfff00039)) {
	ATARIHW_SET(IDE);
	printk("IDE ");
	}
	#if 1 /* This maybe wrong */
	if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
	hwreg_present(&tt_microwire.mask) &&
	(tt_microwire.mask = 0x7ff,
	udelay(1),
	tt_microwire.data = MW_LM1992_PSG_HIGH \| MW_LM1992_ADDR,
	udelay(1),
	tt_microwire.data != 0)) {
	ATARIHW_SET(MICROWIRE);
	while (tt_microwire.mask != 0x7ff)
	;
	printk("MICROWIRE ");
	}
	#endif
	if (hwreg_present(&tt_rtc.regsel)) {
	ATARIHW_SET(TT_CLK);
	printk("TT_CLK ");
	mach_hwclk = atari_tt_hwclk;
	mach_set_clock_mmss = atari_tt_set_clock_mmss;
	}
	if (hwreg_present(&mste_rtc.sec_ones)) {
	ATARIHW_SET(MSTE_CLK);
	printk("MSTE_CLK ");
	mach_hwclk = atari_mste_hwclk;
	mach_set_clock_mmss = atari_mste_set_clock_mmss;
	}
	if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
	hwreg_write(&dma_wd.fdc_speed, 0)) {
	ATARIHW_SET(FDCSPEED);
	printk("FDC_SPEED ");
	}
	if (!ATARIHW_PRESENT(ST_SCSI)) {
	ATARIHW_SET(ACSI);
	printk("ACSI ");
	}
	printk("\n");

	if (CPU_IS_040_OR_060)
	/* Now it seems to be safe to turn of the tt0 transparent
	* translation (the one that must not be turned off in
	* head.S...)
	*/
	asm volatile ("\n"
	" moveq #0,%%d0\n"
	" .chip 68040\n"
	" movec %%d0,%%itt0\n"
	" movec %%d0,%%dtt0\n"
	" .chip 68k"
	: /* no outputs */
	: /* no inputs */
	: "d0");

	/* allocator for memory that must reside in st-ram */
	atari_stram_init();

	/* Set up a mapping for the VMEbus address region:
	*
	* VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
	* (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
	* 0xfe000000 virt., because this can be done with a single
	* transparent translation. On the 68040, lots of often unused
	* page tables would be needed otherwise. On a MegaSTE or similar,
	* the highest byte is stripped off by hardware due to the 24 bit
	* design of the bus.
	*/

	if (CPU_IS_020_OR_030) {
	unsigned long tt1_val;
	tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache
	* inhibit, read and write, FDC mask = 3,
	* FDC val = 4 -> Supervisor only */
	asm volatile ("\n"
	" .chip 68030\n"
	" pmove %0@,%/tt1\n"
	" .chip 68k"
	: : "a" (&tt1_val));
	} else {
	asm volatile ("\n"
	" .chip 68040\n"
	" movec %0,%%itt1\n"
	" movec %0,%%dtt1\n"
	" .chip 68k"
	:
	: "d" (0xfe00a040)); /* Translate 0xfexxxxxx, enable,
	* supervisor only, non-cacheable/
	* serialized, writable */

	}

	/* Fetch tos version at Physical 2 */
	/*
	* We my not be able to access this address if the kernel is
	* loaded to st ram, since the first page is unmapped. On the
	* Medusa this is always the case and there is nothing we can do
	* about this, so we just assume the smaller offset. For the TT
	* we use the fact that in head.S we have set up a mapping
	* 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
	* in the last 16MB of the address space.
	*/
	tos_version = (MACH_IS_MEDUSA) ?
	0xfff : (unsigned short )0xff000002;
	atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
	}

	#ifdef CONFIG_HEARTBEAT
	static void atari_heartbeat(int on)
	{
	unsigned char tmp;
	unsigned long flags;

	if (atari_dont_touch_floppy_select)
	return;

	local_irq_save(flags);
	sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
	tmp = sound_ym.rd_data_reg_sel;
	sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp \| 0x02);
	local_irq_restore(flags);
	}
	#endif

	/* ++roman:
	*
	* This function does a reset on machines that lack the ability to
	* assert the processor's _RESET signal somehow via hardware. It is
	* based on the fact that you can find the initial SP and PC values
	* after a reset at physical addresses 0 and 4. This works pretty well
	* for Atari machines, since the lowest 8 bytes of physical memory are
	* really ROM (mapped by hardware). For other 680x0 machines: don't
	* know if it works...
	*
	* To get the values at addresses 0 and 4, the MMU better is turned
	* off first. After that, we have to jump into physical address space
	* (the PC before the pmove statement points to the virtual address of
	* the code). Getting that physical address is not hard, but the code
	* becomes a bit complex since I've tried to ensure that the jump
	* statement after the pmove is in the cache already (otherwise the
	* processor can't fetch it!). For that, the code first jumps to the
	* jump statement with the (virtual) address of the pmove section in
	* an address register . The jump statement is surely in the cache
	* now. After that, that physical address of the reset code is loaded
	* into the same address register, pmove is done and the same jump
	* statements goes to the reset code. Since there are not many
	* statements between the two jumps, I hope it stays in the cache.
	*
	* The C code makes heavy use of the GCC features that you can get the
	* address of a C label. No hope to compile this with another compiler
	* than GCC!
	*/

	/* ++andreas: no need for complicated code, just depend on prefetch */

	static void atari_reset(void)
	{
	long tc_val = 0;
	long reset_addr;

	/*
	* On the Medusa, phys. 0x4 may contain garbage because it's no
	* ROM. See above for explanation why we cannot use PTOV(4).
	*/
	reset_addr = MACH_IS_MEDUSA \|\| MACH_IS_AB40 ? 0xe00030 :
	(unsigned long ) 0xff000004;

	/* reset ACIA for switch off OverScan, if it's active */
	if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
	acia.key_ctrl = ACIA_RESET;
	if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
	acia.mid_ctrl = ACIA_RESET;

	/* processor independent: turn off interrupts and reset the VBR;
	* the caches must be left enabled, else prefetching the final jump
	* instruction doesn't work.
	*/
	local_irq_disable();
	asm volatile ("movec %0,%%vbr"
	: : "d" (0));

	if (CPU_IS_040_OR_060) {
	unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
	if (CPU_IS_060) {
	/* 68060: clear PCR to turn off superscalar operation */
	asm volatile ("\n"
	" .chip 68060\n"
	" movec %0,%%pcr\n"
	" .chip 68k"
	: : "d" (0));
	}

	asm volatile ("\n"
	" move.l %0,%%d0\n"
	" and.l #0xff000000,%%d0\n"
	" or.w #0xe020,%%d0\n" /* map 16 MB, enable, cacheable */
	" .chip 68040\n"
	" movec %%d0,%%itt0\n"
	" movec %%d0,%%dtt0\n"
	" .chip 68k\n"
	" jmp %0@"
	: : "a" (jmp_addr040)
	: "d0");
	jmp_addr_label040:
	asm volatile ("\n"
	" moveq #0,%%d0\n"
	" nop\n"
	" .chip 68040\n"
	" cinva %%bc\n"
	" nop\n"
	" pflusha\n"
	" nop\n"
	" movec %%d0,%%tc\n"
	" nop\n"
	/* the following setup of transparent translations is needed on the
	* Afterburner040 to successfully reboot. Other machines shouldn't
	* care about a different tt regs setup, they also didn't care in
	* the past that the regs weren't turned off. */
	" move.l #0xffc000,%%d0\n" /* whole insn space cacheable */
	" movec %%d0,%%itt0\n"
	" movec %%d0,%%itt1\n"
	" or.w #0x40,%/d0\n" /* whole data space non-cacheable/ser. */
	" movec %%d0,%%dtt0\n"
	" movec %%d0,%%dtt1\n"
	" .chip 68k\n"
	" jmp %0@"
	: /* no outputs */
	: "a" (reset_addr)
	: "d0");
	} else
	asm volatile ("\n"
	" pmove %0@,%%tc\n"
	" jmp %1@"
	: /* no outputs */
	: "a" (&tc_val), "a" (reset_addr));
	}


	static void atari_get_model(char *model)
	{
	strcpy(model, "Atari ");
	switch (atari_mch_cookie >> 16) {
	case ATARI_MCH_ST:
	if (ATARIHW_PRESENT(MSTE_CLK))
	strcat(model, "Mega ST");
	else
	strcat(model, "ST");
	break;
	case ATARI_MCH_STE:
	if (MACH_IS_MSTE)
	strcat(model, "Mega STE");
	else
	strcat(model, "STE");
	break;
	case ATARI_MCH_TT:
	if (MACH_IS_MEDUSA)
	/* Medusa has TT _MCH cookie */
	strcat(model, "Medusa");
	else
	strcat(model, "TT");
	break;
	case ATARI_MCH_FALCON:
	strcat(model, "Falcon");
	if (MACH_IS_AB40)
	strcat(model, " (with Afterburner040)");
	break;
	default:
	sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
	atari_mch_cookie);
	break;
	}
	}


	static void atari_get_hardware_list(struct seq_file *m)
	{
	int i;

	for (i = 0; i < m68k_num_memory; i++)
	seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
	m68k_memory[i].size >> 20, m68k_memory[i].addr,
	(m68k_memory[i].addr & 0xff000000 ?
	"alternate RAM" : "ST-RAM"));

	#define ATARIHW_ANNOUNCE(name, str) \
	if (ATARIHW_PRESENT(name)) \
	seq_printf(m, "\t%s\n", str)

	seq_printf(m, "Detected hardware:\n");
	ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
	ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
	ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
	ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
	ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
	ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
	ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
	ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
	ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
	ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
	ATARIHW_ANNOUNCE(IDE, "IDE Interface");
	ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
	ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
	ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
	ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
	ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
	ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
	ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
	ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
	ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
	ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
	ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
	ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
	ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
	ATARIHW_ANNOUNCE(SCU, "System Control Unit");
	ATARIHW_ANNOUNCE(BLITTER, "Blitter");
	ATARIHW_ANNOUNCE(VME, "VME Bus");
	ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
	}