| /* |
| * SMP support for R-Mobile / SH-Mobile |
| * |
| * Copyright (C) 2010 Magnus Damm |
| * Copyright (C) 2010 Takashi Yoshii |
| * |
| * Based on vexpress, Copyright (c) 2003 ARM Limited, All Rights Reserved |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/linkage.h> |
| #include <linux/init.h> |
| #include <asm/memory.h> |
| |
| __CPUINIT |
| |
| /* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks! |
| * |
| * The secondary kernel init calls v7_flush_dcache_all before it enables |
| * the L1; however, the L1 comes out of reset in an undefined state, so |
| * the clean + invalidate performed by v7_flush_dcache_all causes a bunch |
| * of cache lines with uninitialized data and uninitialized tags to get |
| * written out to memory, which does really unpleasant things to the main |
| * processor. We fix this by performing an invalidate, rather than a |
| * clean + invalidate, before jumping into the kernel. |
| * |
| * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs |
| * to be called for both secondary cores startup and primary core resume |
| * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. |
| */ |
| ENTRY(v7_invalidate_l1) |
| mov r0, #0 |
| mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache |
| mcr p15, 2, r0, c0, c0, 0 |
| mrc p15, 1, r0, c0, c0, 0 |
| |
| ldr r1, =0x7fff |
| and r2, r1, r0, lsr #13 |
| |
| ldr r1, =0x3ff |
| |
| and r3, r1, r0, lsr #3 @ NumWays - 1 |
| add r2, r2, #1 @ NumSets |
| |
| and r0, r0, #0x7 |
| add r0, r0, #4 @ SetShift |
| |
| clz r1, r3 @ WayShift |
| add r4, r3, #1 @ NumWays |
| 1: sub r2, r2, #1 @ NumSets-- |
| mov r3, r4 @ Temp = NumWays |
| 2: subs r3, r3, #1 @ Temp-- |
| mov r5, r3, lsl r1 |
| mov r6, r2, lsl r0 |
| orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) |
| mcr p15, 0, r5, c7, c6, 2 |
| bgt 2b |
| cmp r2, #0 |
| bgt 1b |
| dsb |
| isb |
| mov pc, lr |
| ENDPROC(v7_invalidate_l1) |
| |
| ENTRY(shmobile_invalidate_start) |
| bl v7_invalidate_l1 |
| b secondary_startup |
| ENDPROC(shmobile_invalidate_start) |
| |
| /* |
| * Reset vector for secondary CPUs. |
| * This will be mapped at address 0 by SBAR register. |
| * We need _long_ jump to the physical address. |
| */ |
| .align 12 |
| ENTRY(shmobile_secondary_vector) |
| ldr pc, 1f |
| 1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET |
| ENDPROC(shmobile_secondary_vector) |