| #ifndef _SCSI_SCSI_DEVINFO_H |
| #define _SCSI_SCSI_DEVINFO_H |
| /* |
| * Flags for SCSI devices that need special treatment |
| */ |
| #define BLIST_NOLUN 0x001 /* Only scan LUN 0 */ |
| #define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning, |
| deprecated: Use max_luns=N */ |
| #define BLIST_BORKEN 0x004 /* Flag for broken handshaking */ |
| #define BLIST_KEY 0x008 /* unlock by special command */ |
| #define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */ |
| #define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */ |
| #define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */ |
| #define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */ |
| #define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */ |
| #define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */ |
| #define BLIST_INQUIRY_36 0x400 /* override additional length field */ |
| #define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */ |
| #define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */ |
| #define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */ |
| #define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */ |
| #define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */ |
| #define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */ |
| #define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs |
| (if HBA supports more than 8 LUNs) */ |
| #define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */ |
| #define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */ |
| #define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */ |
| #define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */ |
| #define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */ |
| #define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */ |
| #define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */ |
| #define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */ |
| #define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */ |
| #define BLIST_SCSI3LUN 0x8000000 /* Scan more than 256 LUNs |
| for sequential scan */ |
| #define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */ |
| #define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */ |
| #define BLIST_MAX_1024 0x40000000 /* maximum 1024 sector cdb length */ |
| #define BLIST_SYNC_ALUA 0x80000000 /* Synchronous ALUA commands */ |
| |
| #endif |