| /* |
| * Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "bimc-bwmon: " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/log2.h> |
| #include <linux/sizes.h> |
| #include "governor_bw_hwmon.h" |
| |
| #define GLB_INT_STATUS(m) ((m)->global_base + 0x100) |
| #define GLB_INT_CLR(m) ((m)->global_base + 0x108) |
| #define GLB_INT_EN(m) ((m)->global_base + 0x10C) |
| #define MON_INT_STATUS(m) ((m)->base + 0x100) |
| #define MON_INT_STATUS_MASK 0x03 |
| #define MON2_INT_STATUS_MASK 0xF0 |
| #define MON2_INT_STATUS_SHIFT 4 |
| #define MON_INT_CLR(m) ((m)->base + 0x108) |
| #define MON_INT_EN(m) ((m)->base + 0x10C) |
| #define MON_INT_ENABLE 0x1 |
| #define MON_EN(m) ((m)->base + 0x280) |
| #define MON_CLEAR(m) ((m)->base + 0x284) |
| #define MON_CNT(m) ((m)->base + 0x288) |
| #define MON_THRES(m) ((m)->base + 0x290) |
| #define MON_MASK(m) ((m)->base + 0x298) |
| #define MON_MATCH(m) ((m)->base + 0x29C) |
| |
| #define MON2_EN(m) ((m)->base + 0x2A0) |
| #define MON2_CLEAR(m) ((m)->base + 0x2A4) |
| #define MON2_SW(m) ((m)->base + 0x2A8) |
| #define MON2_THRES_HI(m) ((m)->base + 0x2AC) |
| #define MON2_THRES_MED(m) ((m)->base + 0x2B0) |
| #define MON2_THRES_LO(m) ((m)->base + 0x2B4) |
| #define MON2_ZONE_ACTIONS(m) ((m)->base + 0x2B8) |
| #define MON2_ZONE_CNT_THRES(m) ((m)->base + 0x2BC) |
| #define MON2_BYTE_CNT(m) ((m)->base + 0x2D0) |
| #define MON2_WIN_TIMER(m) ((m)->base + 0x2D4) |
| #define MON2_ZONE_CNT(m) ((m)->base + 0x2D8) |
| #define MON2_ZONE_MAX(m, zone) ((m)->base + 0x2E0 + 0x4 * zone) |
| |
| #define MON3_INT_STATUS(m) ((m)->base + 0x00) |
| #define MON3_INT_CLR(m) ((m)->base + 0x08) |
| #define MON3_INT_EN(m) ((m)->base + 0x0C) |
| #define MON3_INT_STATUS_MASK 0x0F |
| #define MON3_EN(m) ((m)->base + 0x10) |
| #define MON3_CLEAR(m) ((m)->base + 0x14) |
| #define MON3_MASK(m) ((m)->base + 0x18) |
| #define MON3_MATCH(m) ((m)->base + 0x1C) |
| #define MON3_SW(m) ((m)->base + 0x20) |
| #define MON3_THRES_HI(m) ((m)->base + 0x24) |
| #define MON3_THRES_MED(m) ((m)->base + 0x28) |
| #define MON3_THRES_LO(m) ((m)->base + 0x2C) |
| #define MON3_ZONE_ACTIONS(m) ((m)->base + 0x30) |
| #define MON3_ZONE_CNT_THRES(m) ((m)->base + 0x34) |
| #define MON3_BYTE_CNT(m) ((m)->base + 0x38) |
| #define MON3_WIN_TIMER(m) ((m)->base + 0x3C) |
| #define MON3_ZONE_CNT(m) ((m)->base + 0x40) |
| #define MON3_ZONE_MAX(m, zone) ((m)->base + 0x44 + 0x4 * zone) |
| |
| enum mon_reg_type { |
| MON1, |
| MON2, |
| MON3, |
| }; |
| |
| struct bwmon_spec { |
| bool wrap_on_thres; |
| bool overflow; |
| bool throt_adj; |
| bool hw_sampling; |
| bool has_global_base; |
| enum mon_reg_type reg_type; |
| }; |
| |
| struct bwmon { |
| void __iomem *base; |
| void __iomem *global_base; |
| unsigned int mport; |
| int irq; |
| const struct bwmon_spec *spec; |
| struct device *dev; |
| struct bw_hwmon hw; |
| u32 hw_timer_hz; |
| u32 throttle_adj; |
| u32 sample_size_ms; |
| u32 intr_status; |
| u8 count_shift; |
| u32 thres_lim; |
| u32 byte_mask; |
| u32 byte_match; |
| }; |
| |
| #define to_bwmon(ptr) container_of(ptr, struct bwmon, hw) |
| |
| #define ENABLE_MASK BIT(0) |
| #define THROTTLE_MASK 0x1F |
| #define THROTTLE_SHIFT 16 |
| |
| static DEFINE_SPINLOCK(glb_lock); |
| |
| static __always_inline void mon_enable(struct bwmon *m, enum mon_reg_type type) |
| { |
| switch (type) { |
| case MON1: |
| writel_relaxed(ENABLE_MASK | m->throttle_adj, MON_EN(m)); |
| break; |
| case MON2: |
| writel_relaxed(ENABLE_MASK | m->throttle_adj, MON2_EN(m)); |
| break; |
| case MON3: |
| writel_relaxed(ENABLE_MASK | m->throttle_adj, MON3_EN(m)); |
| break; |
| } |
| } |
| |
| static __always_inline void mon_disable(struct bwmon *m, enum mon_reg_type type) |
| { |
| switch (type) { |
| case MON1: |
| writel_relaxed(m->throttle_adj, MON_EN(m)); |
| break; |
| case MON2: |
| writel_relaxed(m->throttle_adj, MON2_EN(m)); |
| break; |
| case MON3: |
| writel_relaxed(m->throttle_adj, MON3_EN(m)); |
| break; |
| } |
| /* |
| * mon_disable() and mon_irq_clear(), |
| * If latter goes first and count happen to trigger irq, we would |
| * have the irq line high but no one handling it. |
| */ |
| mb(); |
| } |
| |
| #define MON_CLEAR_BIT 0x1 |
| #define MON_CLEAR_ALL_BIT 0x2 |
| static __always_inline |
| void mon_clear(struct bwmon *m, bool clear_all, enum mon_reg_type type) |
| { |
| switch (type) { |
| case MON1: |
| writel_relaxed(MON_CLEAR_BIT, MON_CLEAR(m)); |
| break; |
| case MON2: |
| if (clear_all) |
| writel_relaxed(MON_CLEAR_ALL_BIT, MON2_CLEAR(m)); |
| else |
| writel_relaxed(MON_CLEAR_BIT, MON2_CLEAR(m)); |
| break; |
| case MON3: |
| if (clear_all) |
| writel_relaxed(MON_CLEAR_ALL_BIT, MON3_CLEAR(m)); |
| else |
| writel_relaxed(MON_CLEAR_BIT, MON3_CLEAR(m)); |
| break; |
| } |
| /* |
| * The counter clear and IRQ clear bits are not in the same 4KB |
| * region. So, we need to make sure the counter clear is completed |
| * before we try to clear the IRQ or do any other counter operations. |
| */ |
| mb(); |
| } |
| |
| #define SAMPLE_WIN_LIM 0xFFFFF |
| static __always_inline |
| void mon_set_hw_sampling_window(struct bwmon *m, unsigned int sample_ms, |
| enum mon_reg_type type) |
| { |
| u32 rate; |
| |
| if (unlikely(sample_ms != m->sample_size_ms)) { |
| rate = mult_frac(sample_ms, m->hw_timer_hz, MSEC_PER_SEC); |
| m->sample_size_ms = sample_ms; |
| if (unlikely(rate > SAMPLE_WIN_LIM)) { |
| rate = SAMPLE_WIN_LIM; |
| pr_warn("Sample window %u larger than hw limit: %u\n", |
| rate, SAMPLE_WIN_LIM); |
| } |
| switch (type) { |
| case MON1: |
| WARN(1, "Invalid\n"); |
| return; |
| case MON2: |
| writel_relaxed(rate, MON2_SW(m)); |
| break; |
| case MON3: |
| writel_relaxed(rate, MON3_SW(m)); |
| break; |
| } |
| } |
| } |
| |
| static void mon_glb_irq_enable(struct bwmon *m) |
| { |
| u32 val; |
| |
| val = readl_relaxed(GLB_INT_EN(m)); |
| val |= 1 << m->mport; |
| writel_relaxed(val, GLB_INT_EN(m)); |
| } |
| |
| static __always_inline |
| void mon_irq_enable(struct bwmon *m, enum mon_reg_type type) |
| { |
| u32 val; |
| |
| spin_lock(&glb_lock); |
| switch (type) { |
| case MON1: |
| mon_glb_irq_enable(m); |
| val = readl_relaxed(MON_INT_EN(m)); |
| val |= MON_INT_ENABLE; |
| writel_relaxed(val, MON_INT_EN(m)); |
| break; |
| case MON2: |
| mon_glb_irq_enable(m); |
| val = readl_relaxed(MON_INT_EN(m)); |
| val |= MON2_INT_STATUS_MASK; |
| writel_relaxed(val, MON_INT_EN(m)); |
| break; |
| case MON3: |
| val = readl_relaxed(MON3_INT_EN(m)); |
| val |= MON3_INT_STATUS_MASK; |
| writel_relaxed(val, MON3_INT_EN(m)); |
| break; |
| } |
| spin_unlock(&glb_lock); |
| /* |
| * make sure irq enable complete for local and global |
| * to avoid race with other monitor calls |
| */ |
| mb(); |
| } |
| |
| static void mon_glb_irq_disable(struct bwmon *m) |
| { |
| u32 val; |
| |
| val = readl_relaxed(GLB_INT_EN(m)); |
| val &= ~(1 << m->mport); |
| writel_relaxed(val, GLB_INT_EN(m)); |
| } |
| |
| static __always_inline |
| void mon_irq_disable(struct bwmon *m, enum mon_reg_type type) |
| { |
| u32 val; |
| |
| spin_lock(&glb_lock); |
| |
| switch (type) { |
| case MON1: |
| mon_glb_irq_disable(m); |
| val = readl_relaxed(MON_INT_EN(m)); |
| val &= ~MON_INT_ENABLE; |
| writel_relaxed(val, MON_INT_EN(m)); |
| break; |
| case MON2: |
| mon_glb_irq_disable(m); |
| val = readl_relaxed(MON_INT_EN(m)); |
| val &= ~MON2_INT_STATUS_MASK; |
| writel_relaxed(val, MON_INT_EN(m)); |
| break; |
| case MON3: |
| val = readl_relaxed(MON3_INT_EN(m)); |
| val &= ~MON3_INT_STATUS_MASK; |
| writel_relaxed(val, MON3_INT_EN(m)); |
| break; |
| } |
| spin_unlock(&glb_lock); |
| /* |
| * make sure irq disable complete for local and global |
| * to avoid race with other monitor calls |
| */ |
| mb(); |
| } |
| |
| static __always_inline |
| unsigned int mon_irq_status(struct bwmon *m, enum mon_reg_type type) |
| { |
| u32 mval; |
| |
| switch (type) { |
| case MON1: |
| mval = readl_relaxed(MON_INT_STATUS(m)); |
| dev_dbg(m->dev, "IRQ status p:%x, g:%x\n", mval, |
| readl_relaxed(GLB_INT_STATUS(m))); |
| mval &= MON_INT_STATUS_MASK; |
| break; |
| case MON2: |
| mval = readl_relaxed(MON_INT_STATUS(m)); |
| dev_dbg(m->dev, "IRQ status p:%x, g:%x\n", mval, |
| readl_relaxed(GLB_INT_STATUS(m))); |
| mval &= MON2_INT_STATUS_MASK; |
| mval >>= MON2_INT_STATUS_SHIFT; |
| break; |
| case MON3: |
| mval = readl_relaxed(MON3_INT_STATUS(m)); |
| dev_dbg(m->dev, "IRQ status p:%x\n", mval); |
| mval &= MON3_INT_STATUS_MASK; |
| break; |
| } |
| |
| return mval; |
| } |
| |
| |
| static void mon_glb_irq_clear(struct bwmon *m) |
| { |
| /* |
| * Synchronize the local interrupt clear in mon_irq_clear() |
| * with the global interrupt clear here. Otherwise, the CPU |
| * may reorder the two writes and clear the global interrupt |
| * before the local interrupt, causing the global interrupt |
| * to be retriggered by the local interrupt still being high. |
| */ |
| mb(); |
| writel_relaxed(1 << m->mport, GLB_INT_CLR(m)); |
| /* |
| * Similarly, because the global registers are in a different |
| * region than the local registers, we need to ensure any register |
| * writes to enable the monitor after this call are ordered with the |
| * clearing here so that local writes don't happen before the |
| * interrupt is cleared. |
| */ |
| mb(); |
| } |
| |
| static __always_inline |
| void mon_irq_clear(struct bwmon *m, enum mon_reg_type type) |
| { |
| switch (type) { |
| case MON1: |
| writel_relaxed(MON_INT_STATUS_MASK, MON_INT_CLR(m)); |
| mon_glb_irq_clear(m); |
| break; |
| case MON2: |
| writel_relaxed(MON2_INT_STATUS_MASK, MON_INT_CLR(m)); |
| mon_glb_irq_clear(m); |
| break; |
| case MON3: |
| writel_relaxed(MON3_INT_STATUS_MASK, MON3_INT_CLR(m)); |
| break; |
| } |
| } |
| |
| static int mon_set_throttle_adj(struct bw_hwmon *hw, uint adj) |
| { |
| struct bwmon *m = to_bwmon(hw); |
| |
| if (adj > THROTTLE_MASK) |
| return -EINVAL; |
| |
| adj = (adj & THROTTLE_MASK) << THROTTLE_SHIFT; |
| m->throttle_adj = adj; |
| |
| return 0; |
| } |
| |
| static u32 mon_get_throttle_adj(struct bw_hwmon *hw) |
| { |
| struct bwmon *m = to_bwmon(hw); |
| |
| return m->throttle_adj >> THROTTLE_SHIFT; |
| } |
| |
| #define ZONE1_SHIFT 8 |
| #define ZONE2_SHIFT 16 |
| #define ZONE3_SHIFT 24 |
| #define ZONE0_ACTION 0x01 /* Increment zone 0 count */ |
| #define ZONE1_ACTION 0x09 /* Increment zone 1 & clear lower zones */ |
| #define ZONE2_ACTION 0x25 /* Increment zone 2 & clear lower zones */ |
| #define ZONE3_ACTION 0x95 /* Increment zone 3 & clear lower zones */ |
| static u32 calc_zone_actions(void) |
| { |
| u32 zone_actions; |
| |
| zone_actions = ZONE0_ACTION; |
| zone_actions |= ZONE1_ACTION << ZONE1_SHIFT; |
| zone_actions |= ZONE2_ACTION << ZONE2_SHIFT; |
| zone_actions |= ZONE3_ACTION << ZONE3_SHIFT; |
| |
| return zone_actions; |
| } |
| |
| #define ZONE_CNT_LIM 0xFFU |
| #define UP_CNT_1 1 |
| static u32 calc_zone_counts(struct bw_hwmon *hw) |
| { |
| u32 zone_counts; |
| |
| zone_counts = ZONE_CNT_LIM; |
| zone_counts |= min(hw->down_cnt, ZONE_CNT_LIM) << ZONE1_SHIFT; |
| zone_counts |= ZONE_CNT_LIM << ZONE2_SHIFT; |
| zone_counts |= UP_CNT_1 << ZONE3_SHIFT; |
| |
| return zone_counts; |
| } |
| |
| #define MB_SHIFT 20 |
| |
| static u32 mbps_to_count(unsigned long mbps, unsigned int ms, u8 shift) |
| { |
| mbps *= ms; |
| |
| if (shift > MB_SHIFT) |
| mbps >>= shift - MB_SHIFT; |
| else |
| mbps <<= MB_SHIFT - shift; |
| |
| return DIV_ROUND_UP(mbps, MSEC_PER_SEC); |
| } |
| |
| /* |
| * Define the 4 zones using HI, MED & LO thresholds: |
| * Zone 0: byte count < THRES_LO |
| * Zone 1: THRES_LO < byte count < THRES_MED |
| * Zone 2: THRES_MED < byte count < THRES_HI |
| * Zone 3: THRES_LIM > byte count > THRES_HI |
| */ |
| #define THRES_LIM(shift) (0xFFFFFFFF >> shift) |
| |
| static __always_inline |
| void set_zone_thres(struct bwmon *m, unsigned int sample_ms, |
| enum mon_reg_type type) |
| { |
| struct bw_hwmon *hw = &m->hw; |
| u32 hi, med, lo; |
| u32 zone_cnt_thres = calc_zone_counts(hw); |
| |
| hi = mbps_to_count(hw->up_wake_mbps, sample_ms, m->count_shift); |
| med = mbps_to_count(hw->down_wake_mbps, sample_ms, m->count_shift); |
| lo = 0; |
| |
| if (unlikely((hi > m->thres_lim) || (med > hi) || (lo > med))) { |
| pr_warn("Zone thres larger than hw limit: hi:%u med:%u lo:%u\n", |
| hi, med, lo); |
| hi = min(hi, m->thres_lim); |
| med = min(med, hi - 1); |
| lo = min(lo, med-1); |
| } |
| |
| switch (type) { |
| case MON1: |
| WARN(1, "Invalid\n"); |
| return; |
| case MON2: |
| writel_relaxed(hi, MON2_THRES_HI(m)); |
| writel_relaxed(med, MON2_THRES_MED(m)); |
| writel_relaxed(lo, MON2_THRES_LO(m)); |
| /* Set the zone count thresholds for interrupts */ |
| writel_relaxed(zone_cnt_thres, MON2_ZONE_CNT_THRES(m)); |
| break; |
| case MON3: |
| writel_relaxed(hi, MON3_THRES_HI(m)); |
| writel_relaxed(med, MON3_THRES_MED(m)); |
| writel_relaxed(lo, MON3_THRES_LO(m)); |
| /* Set the zone count thresholds for interrupts */ |
| writel_relaxed(zone_cnt_thres, MON3_ZONE_CNT_THRES(m)); |
| break; |
| } |
| |
| dev_dbg(m->dev, "Thres: hi:%u med:%u lo:%u\n", hi, med, lo); |
| dev_dbg(m->dev, "Zone Count Thres: %0x\n", zone_cnt_thres); |
| } |
| |
| static __always_inline |
| void mon_set_zones(struct bwmon *m, unsigned int sample_ms, |
| enum mon_reg_type type) |
| { |
| mon_set_hw_sampling_window(m, sample_ms, type); |
| set_zone_thres(m, sample_ms, type); |
| } |
| |
| static void mon_set_limit(struct bwmon *m, u32 count) |
| { |
| writel_relaxed(count, MON_THRES(m)); |
| dev_dbg(m->dev, "Thres: %08x\n", count); |
| } |
| |
| static u32 mon_get_limit(struct bwmon *m) |
| { |
| return readl_relaxed(MON_THRES(m)); |
| } |
| |
| #define THRES_HIT(status) (status & BIT(0)) |
| #define OVERFLOW(status) (status & BIT(1)) |
| static unsigned long mon_get_count1(struct bwmon *m) |
| { |
| unsigned long count, status; |
| |
| count = readl_relaxed(MON_CNT(m)); |
| status = mon_irq_status(m, MON1); |
| |
| dev_dbg(m->dev, "Counter: %08lx\n", count); |
| |
| if (OVERFLOW(status) && m->spec->overflow) |
| count += 0xFFFFFFFF; |
| if (THRES_HIT(status) && m->spec->wrap_on_thres) |
| count += mon_get_limit(m); |
| |
| dev_dbg(m->dev, "Actual Count: %08lx\n", count); |
| |
| return count; |
| } |
| |
| static __always_inline |
| unsigned int get_zone(struct bwmon *m, enum mon_reg_type type) |
| { |
| u32 zone_counts; |
| u32 zone; |
| |
| zone = get_bitmask_order(m->intr_status); |
| if (zone) { |
| zone--; |
| } else { |
| switch (type) { |
| case MON1: |
| WARN(1, "Invalid\n"); |
| return 0; |
| case MON2: |
| zone_counts = readl_relaxed(MON2_ZONE_CNT(m)); |
| break; |
| case MON3: |
| zone_counts = readl_relaxed(MON3_ZONE_CNT(m)); |
| break; |
| } |
| |
| if (zone_counts) { |
| zone = get_bitmask_order(zone_counts) - 1; |
| zone /= 8; |
| } |
| } |
| |
| m->intr_status = 0; |
| return zone; |
| } |
| |
| static __always_inline |
| unsigned long get_zone_count(struct bwmon *m, unsigned int zone, |
| enum mon_reg_type type) |
| { |
| unsigned long count; |
| |
| switch (type) { |
| case MON1: |
| WARN(1, "Invalid\n"); |
| return 0; |
| case MON2: |
| count = readl_relaxed(MON2_ZONE_MAX(m, zone)) + 1; |
| break; |
| case MON3: |
| count = readl_relaxed(MON3_ZONE_MAX(m, zone)) + 1; |
| break; |
| } |
| |
| return count; |
| } |
| |
| static __always_inline |
| unsigned long mon_get_zone_stats(struct bwmon *m, enum mon_reg_type type) |
| { |
| unsigned int zone; |
| unsigned long count = 0; |
| |
| zone = get_zone(m, type); |
| count = get_zone_count(m, zone, type); |
| count <<= m->count_shift; |
| |
| dev_dbg(m->dev, "Zone%d Max byte count: %08lx\n", zone, count); |
| |
| return count; |
| } |
| |
| static __always_inline |
| unsigned long mon_get_count(struct bwmon *m, enum mon_reg_type type) |
| { |
| unsigned long count; |
| |
| switch (type) { |
| case MON1: |
| count = mon_get_count1(m); |
| break; |
| case MON2: |
| case MON3: |
| count = mon_get_zone_stats(m, type); |
| break; |
| } |
| |
| return count; |
| } |
| |
| /* ********** CPUBW specific code ********** */ |
| |
| /* Returns MBps of read/writes for the sampling window. */ |
| static unsigned int mbps_to_bytes(unsigned long mbps, unsigned int ms, |
| unsigned int tolerance_percent) |
| { |
| mbps *= (100 + tolerance_percent) * ms; |
| mbps /= 100; |
| mbps = DIV_ROUND_UP(mbps, MSEC_PER_SEC); |
| mbps *= SZ_1M; |
| return mbps; |
| } |
| |
| static __always_inline |
| unsigned long __get_bytes_and_clear(struct bw_hwmon *hw, enum mon_reg_type type) |
| { |
| struct bwmon *m = to_bwmon(hw); |
| unsigned long count; |
| |
| mon_disable(m, type); |
| count = mon_get_count(m, type); |
| mon_clear(m, false, type); |
| mon_irq_clear(m, type); |
| mon_enable(m, type); |
| |
| return count; |
| } |
| |
| static unsigned long get_bytes_and_clear(struct bw_hwmon *hw) |
| { |
| return __get_bytes_and_clear(hw, MON1); |
| } |
| |
| static unsigned long get_bytes_and_clear2(struct bw_hwmon *hw) |
| { |
| return __get_bytes_and_clear(hw, MON2); |
| } |
| |
| static unsigned long get_bytes_and_clear3(struct bw_hwmon *hw) |
| { |
| return __get_bytes_and_clear(hw, MON3); |
| } |
| |
| static unsigned long set_thres(struct bw_hwmon *hw, unsigned long bytes) |
| { |
| unsigned long count; |
| u32 limit; |
| struct bwmon *m = to_bwmon(hw); |
| |
| mon_disable(m, MON1); |
| count = mon_get_count1(m); |
| mon_clear(m, false, MON1); |
| mon_irq_clear(m, MON1); |
| |
| if (likely(!m->spec->wrap_on_thres)) |
| limit = bytes; |
| else |
| limit = max(bytes, 500000UL); |
| |
| mon_set_limit(m, limit); |
| mon_enable(m, MON1); |
| |
| return count; |
| } |
| |
| static unsigned long |
| __set_hw_events(struct bw_hwmon *hw, unsigned int sample_ms, |
| enum mon_reg_type type) |
| { |
| struct bwmon *m = to_bwmon(hw); |
| |
| mon_disable(m, type); |
| mon_clear(m, false, type); |
| mon_irq_clear(m, type); |
| |
| mon_set_zones(m, sample_ms, type); |
| mon_enable(m, type); |
| |
| return 0; |
| } |
| |
| static unsigned long set_hw_events(struct bw_hwmon *hw, unsigned int sample_ms) |
| { |
| return __set_hw_events(hw, sample_ms, MON2); |
| } |
| |
| static unsigned long |
| set_hw_events3(struct bw_hwmon *hw, unsigned int sample_ms) |
| { |
| return __set_hw_events(hw, sample_ms, MON3); |
| } |
| |
| static irqreturn_t |
| __bwmon_intr_handler(int irq, void *dev, enum mon_reg_type type) |
| { |
| struct bwmon *m = dev; |
| |
| m->intr_status = mon_irq_status(m, type); |
| if (!m->intr_status) |
| return IRQ_NONE; |
| |
| if (bw_hwmon_sample_end(&m->hw) > 0) |
| return IRQ_WAKE_THREAD; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t bwmon_intr_handler(int irq, void *dev) |
| { |
| return __bwmon_intr_handler(irq, dev, MON1); |
| } |
| |
| static irqreturn_t bwmon_intr_handler2(int irq, void *dev) |
| { |
| return __bwmon_intr_handler(irq, dev, MON2); |
| } |
| |
| static irqreturn_t bwmon_intr_handler3(int irq, void *dev) |
| { |
| return __bwmon_intr_handler(irq, dev, MON3); |
| } |
| |
| static irqreturn_t bwmon_intr_thread(int irq, void *dev) |
| { |
| struct bwmon *m = dev; |
| |
| update_bw_hwmon(&m->hw); |
| return IRQ_HANDLED; |
| } |
| |
| static __always_inline |
| void mon_set_byte_count_filter(struct bwmon *m, enum mon_reg_type type) |
| { |
| if (!m->byte_mask) |
| return; |
| |
| switch (type) { |
| case MON1: |
| case MON2: |
| writel_relaxed(m->byte_mask, MON_MASK(m)); |
| writel_relaxed(m->byte_match, MON_MATCH(m)); |
| break; |
| case MON3: |
| writel_relaxed(m->byte_mask, MON3_MASK(m)); |
| writel_relaxed(m->byte_match, MON3_MATCH(m)); |
| break; |
| } |
| } |
| |
| static __always_inline int __start_bw_hwmon(struct bw_hwmon *hw, |
| unsigned long mbps, enum mon_reg_type type) |
| { |
| struct bwmon *m = to_bwmon(hw); |
| u32 limit, zone_actions; |
| int ret; |
| irq_handler_t handler; |
| |
| switch (type) { |
| case MON1: |
| handler = bwmon_intr_handler; |
| limit = mbps_to_bytes(mbps, hw->df->profile->polling_ms, 0); |
| break; |
| case MON2: |
| zone_actions = calc_zone_actions(); |
| handler = bwmon_intr_handler2; |
| break; |
| case MON3: |
| zone_actions = calc_zone_actions(); |
| handler = bwmon_intr_handler3; |
| break; |
| } |
| |
| ret = request_threaded_irq(m->irq, handler, bwmon_intr_thread, |
| IRQF_ONESHOT | IRQF_SHARED, |
| dev_name(m->dev), m); |
| if (ret) { |
| dev_err(m->dev, "Unable to register interrupt handler! (%d)\n", |
| ret); |
| return ret; |
| } |
| |
| mon_disable(m, type); |
| |
| mon_clear(m, false, type); |
| |
| switch (type) { |
| case MON1: |
| handler = bwmon_intr_handler; |
| mon_set_limit(m, limit); |
| break; |
| case MON2: |
| mon_set_zones(m, hw->df->profile->polling_ms, type); |
| /* Set the zone actions to increment appropriate counters */ |
| writel_relaxed(zone_actions, MON2_ZONE_ACTIONS(m)); |
| break; |
| case MON3: |
| mon_set_zones(m, hw->df->profile->polling_ms, type); |
| /* Set the zone actions to increment appropriate counters */ |
| writel_relaxed(zone_actions, MON3_ZONE_ACTIONS(m)); |
| } |
| |
| mon_set_byte_count_filter(m, type); |
| mon_irq_clear(m, type); |
| mon_irq_enable(m, type); |
| mon_enable(m, type); |
| |
| return 0; |
| } |
| |
| static int start_bw_hwmon(struct bw_hwmon *hw, unsigned long mbps) |
| { |
| return __start_bw_hwmon(hw, mbps, MON1); |
| } |
| |
| static int start_bw_hwmon2(struct bw_hwmon *hw, unsigned long mbps) |
| { |
| return __start_bw_hwmon(hw, mbps, MON2); |
| } |
| |
| static int start_bw_hwmon3(struct bw_hwmon *hw, unsigned long mbps) |
| { |
| return __start_bw_hwmon(hw, mbps, MON3); |
| } |
| |
| static __always_inline |
| void __stop_bw_hwmon(struct bw_hwmon *hw, enum mon_reg_type type) |
| { |
| struct bwmon *m = to_bwmon(hw); |
| |
| mon_irq_disable(m, type); |
| free_irq(m->irq, m); |
| mon_disable(m, type); |
| mon_clear(m, true, type); |
| mon_irq_clear(m, type); |
| } |
| |
| static void stop_bw_hwmon(struct bw_hwmon *hw) |
| { |
| return __stop_bw_hwmon(hw, MON1); |
| } |
| |
| static void stop_bw_hwmon2(struct bw_hwmon *hw) |
| { |
| return __stop_bw_hwmon(hw, MON2); |
| } |
| |
| static void stop_bw_hwmon3(struct bw_hwmon *hw) |
| { |
| return __stop_bw_hwmon(hw, MON3); |
| } |
| |
| static __always_inline |
| int __suspend_bw_hwmon(struct bw_hwmon *hw, enum mon_reg_type type) |
| { |
| struct bwmon *m = to_bwmon(hw); |
| |
| mon_irq_disable(m, type); |
| free_irq(m->irq, m); |
| mon_disable(m, type); |
| mon_irq_clear(m, type); |
| |
| return 0; |
| } |
| |
| static int suspend_bw_hwmon(struct bw_hwmon *hw) |
| { |
| return __suspend_bw_hwmon(hw, MON1); |
| } |
| |
| static int suspend_bw_hwmon2(struct bw_hwmon *hw) |
| { |
| return __suspend_bw_hwmon(hw, MON2); |
| } |
| |
| static int suspend_bw_hwmon3(struct bw_hwmon *hw) |
| { |
| return __suspend_bw_hwmon(hw, MON3); |
| } |
| |
| static __always_inline |
| int __resume_bw_hwmon(struct bw_hwmon *hw, enum mon_reg_type type) |
| { |
| struct bwmon *m = to_bwmon(hw); |
| int ret; |
| irq_handler_t handler; |
| |
| switch (type) { |
| case MON1: |
| handler = bwmon_intr_handler; |
| break; |
| case MON2: |
| handler = bwmon_intr_handler2; |
| break; |
| case MON3: |
| handler = bwmon_intr_handler3; |
| break; |
| } |
| |
| mon_clear(m, false, type); |
| ret = request_threaded_irq(m->irq, handler, bwmon_intr_thread, |
| IRQF_ONESHOT | IRQF_SHARED, |
| dev_name(m->dev), m); |
| if (ret) { |
| dev_err(m->dev, "Unable to register interrupt handler! (%d)\n", |
| ret); |
| return ret; |
| } |
| |
| mon_irq_enable(m, type); |
| mon_enable(m, type); |
| |
| return 0; |
| } |
| |
| static int resume_bw_hwmon(struct bw_hwmon *hw) |
| { |
| return __resume_bw_hwmon(hw, MON1); |
| } |
| |
| static int resume_bw_hwmon2(struct bw_hwmon *hw) |
| { |
| return __resume_bw_hwmon(hw, MON2); |
| } |
| |
| static int resume_bw_hwmon3(struct bw_hwmon *hw) |
| { |
| return __resume_bw_hwmon(hw, MON3); |
| } |
| |
| /*************************************************************************/ |
| |
| static const struct bwmon_spec spec[] = { |
| [0] = { |
| .wrap_on_thres = true, |
| .overflow = false, |
| .throt_adj = false, |
| .hw_sampling = false, |
| .has_global_base = true, |
| .reg_type = MON1, |
| }, |
| [1] = { |
| .wrap_on_thres = false, |
| .overflow = true, |
| .throt_adj = false, |
| .hw_sampling = false, |
| .has_global_base = true, |
| .reg_type = MON1, |
| }, |
| [2] = { |
| .wrap_on_thres = false, |
| .overflow = true, |
| .throt_adj = true, |
| .hw_sampling = false, |
| .has_global_base = true, |
| .reg_type = MON1, |
| }, |
| [3] = { |
| .wrap_on_thres = false, |
| .overflow = true, |
| .throt_adj = true, |
| .hw_sampling = true, |
| .has_global_base = true, |
| .reg_type = MON2, |
| }, |
| [4] = { |
| .wrap_on_thres = false, |
| .overflow = true, |
| .throt_adj = false, |
| .hw_sampling = true, |
| .reg_type = MON3, |
| }, |
| }; |
| |
| static const struct of_device_id bimc_bwmon_match_table[] = { |
| { .compatible = "qcom,bimc-bwmon", .data = &spec[0] }, |
| { .compatible = "qcom,bimc-bwmon2", .data = &spec[1] }, |
| { .compatible = "qcom,bimc-bwmon3", .data = &spec[2] }, |
| { .compatible = "qcom,bimc-bwmon4", .data = &spec[3] }, |
| { .compatible = "qcom,bimc-bwmon5", .data = &spec[4] }, |
| {} |
| }; |
| |
| static int bimc_bwmon_driver_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct bwmon *m; |
| int ret; |
| u32 data, count_unit; |
| |
| m = devm_kzalloc(dev, sizeof(*m), GFP_KERNEL); |
| if (!m) |
| return -ENOMEM; |
| m->dev = dev; |
| |
| m->spec = of_device_get_match_data(dev); |
| if (!m->spec) { |
| dev_err(dev, "Unknown device type!\n"); |
| return -ENODEV; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base"); |
| if (!res) { |
| dev_err(dev, "base not found!\n"); |
| return -EINVAL; |
| } |
| m->base = devm_ioremap(dev, res->start, resource_size(res)); |
| if (!m->base) { |
| dev_err(dev, "Unable map base!\n"); |
| return -ENOMEM; |
| } |
| |
| if (m->spec->has_global_base) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "global_base"); |
| if (!res) { |
| dev_err(dev, "global_base not found!\n"); |
| return -EINVAL; |
| } |
| m->global_base = devm_ioremap(dev, res->start, |
| resource_size(res)); |
| if (!m->global_base) { |
| dev_err(dev, "Unable map global_base!\n"); |
| return -ENOMEM; |
| } |
| |
| ret = of_property_read_u32(dev->of_node, "qcom,mport", &data); |
| if (ret) { |
| dev_err(dev, "mport not found!\n"); |
| return ret; |
| } |
| m->mport = data; |
| } |
| |
| m->irq = platform_get_irq(pdev, 0); |
| if (m->irq < 0) { |
| dev_err(dev, "Unable to get IRQ number\n"); |
| return m->irq; |
| } |
| |
| m->hw.of_node = of_parse_phandle(dev->of_node, "qcom,target-dev", 0); |
| if (!m->hw.of_node) |
| return -EINVAL; |
| |
| if (m->spec->hw_sampling) { |
| ret = of_property_read_u32(dev->of_node, "qcom,hw-timer-hz", |
| &m->hw_timer_hz); |
| if (ret) { |
| dev_err(dev, "HW sampling rate not specified!\n"); |
| return ret; |
| } |
| } |
| |
| if (of_property_read_u32(dev->of_node, "qcom,count-unit", &count_unit)) |
| count_unit = SZ_1M; |
| m->count_shift = order_base_2(count_unit); |
| m->thres_lim = THRES_LIM(m->count_shift); |
| |
| switch (m->spec->reg_type) { |
| case MON3: |
| m->hw.start_hwmon = start_bw_hwmon3; |
| m->hw.stop_hwmon = stop_bw_hwmon3; |
| m->hw.suspend_hwmon = suspend_bw_hwmon3; |
| m->hw.resume_hwmon = resume_bw_hwmon3; |
| m->hw.get_bytes_and_clear = get_bytes_and_clear3; |
| m->hw.set_hw_events = set_hw_events3; |
| break; |
| case MON2: |
| m->hw.start_hwmon = start_bw_hwmon2; |
| m->hw.stop_hwmon = stop_bw_hwmon2; |
| m->hw.suspend_hwmon = suspend_bw_hwmon2; |
| m->hw.resume_hwmon = resume_bw_hwmon2; |
| m->hw.get_bytes_and_clear = get_bytes_and_clear2; |
| m->hw.set_hw_events = set_hw_events; |
| break; |
| case MON1: |
| m->hw.start_hwmon = start_bw_hwmon; |
| m->hw.stop_hwmon = stop_bw_hwmon; |
| m->hw.suspend_hwmon = suspend_bw_hwmon; |
| m->hw.resume_hwmon = resume_bw_hwmon; |
| m->hw.get_bytes_and_clear = get_bytes_and_clear; |
| m->hw.set_thres = set_thres; |
| break; |
| } |
| |
| of_property_read_u32(dev->of_node, "qcom,byte-mid-match", |
| &m->byte_match); |
| of_property_read_u32(dev->of_node, "qcom,byte-mid-mask", |
| &m->byte_mask); |
| |
| if (m->spec->throt_adj) { |
| m->hw.set_throttle_adj = mon_set_throttle_adj; |
| m->hw.get_throttle_adj = mon_get_throttle_adj; |
| } |
| |
| ret = register_bw_hwmon(dev, &m->hw); |
| if (ret) { |
| dev_err(dev, "Dev BW hwmon registration failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver bimc_bwmon_driver = { |
| .probe = bimc_bwmon_driver_probe, |
| .driver = { |
| .name = "bimc-bwmon", |
| .of_match_table = bimc_bwmon_match_table, |
| }, |
| }; |
| |
| module_platform_driver(bimc_bwmon_driver); |
| MODULE_DESCRIPTION("BIMC bandwidth monitor driver"); |
| MODULE_LICENSE("GPL v2"); |