| /* |
| * max77693.c - Regulator driver for the Maxim 77693 |
| * |
| * Copyright (C) 2013 Samsung Electronics |
| * Jonghwa Lee <jonghwa3.lee@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * This driver is based on max77686.c |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <linux/export.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/mfd/max77693.h> |
| #include <linux/mfd/max77693-private.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regmap.h> |
| |
| #define CHGIN_ILIM_STEP_20mA 20000 |
| |
| /* CHARGER regulator ops */ |
| /* CHARGER regulator uses two bits for enabling */ |
| static int max77693_chg_is_enabled(struct regulator_dev *rdev) |
| { |
| int ret; |
| unsigned int val; |
| |
| ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); |
| if (ret) |
| return ret; |
| |
| return (val & rdev->desc->enable_mask) == rdev->desc->enable_mask; |
| } |
| |
| /* |
| * CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA |
| * 0x00, 0x01, 0x2, 0x03 = 60 mA |
| * 0x04 ~ 0x7E = (60 + (X - 3) * 20) mA |
| */ |
| static int max77693_chg_get_current_limit(struct regulator_dev *rdev) |
| { |
| unsigned int chg_min_uA = rdev->constraints->min_uA; |
| unsigned int chg_max_uA = rdev->constraints->max_uA; |
| unsigned int reg, sel; |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, ®); |
| if (ret < 0) |
| return ret; |
| |
| sel = reg & CHG_CNFG_09_CHGIN_ILIM_MASK; |
| |
| /* the first four codes for charger current are all 60mA */ |
| if (sel <= 3) |
| sel = 0; |
| else |
| sel -= 3; |
| |
| val = chg_min_uA + CHGIN_ILIM_STEP_20mA * sel; |
| if (val > chg_max_uA) |
| return -EINVAL; |
| |
| return val; |
| } |
| |
| static int max77693_chg_set_current_limit(struct regulator_dev *rdev, |
| int min_uA, int max_uA) |
| { |
| unsigned int chg_min_uA = rdev->constraints->min_uA; |
| int sel = 0; |
| |
| while (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel < min_uA) |
| sel++; |
| |
| if (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel > max_uA) |
| return -EINVAL; |
| |
| /* the first four codes for charger current are all 60mA */ |
| sel += 3; |
| |
| return regmap_write(rdev->regmap, |
| MAX77693_CHG_REG_CHG_CNFG_09, sel); |
| } |
| /* end of CHARGER regulator ops */ |
| |
| static const unsigned int max77693_safeout_table[] = { |
| 4850000, |
| 4900000, |
| 4950000, |
| 3300000, |
| }; |
| |
| static struct regulator_ops max77693_safeout_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| }; |
| |
| static struct regulator_ops max77693_charger_ops = { |
| .is_enabled = max77693_chg_is_enabled, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_current_limit = max77693_chg_get_current_limit, |
| .set_current_limit = max77693_chg_set_current_limit, |
| }; |
| |
| #define regulator_desc_esafeout(_num) { \ |
| .name = "ESAFEOUT"#_num, \ |
| .id = MAX77693_ESAFEOUT##_num, \ |
| .n_voltages = 4, \ |
| .ops = &max77693_safeout_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = max77693_safeout_table, \ |
| .vsel_reg = MAX77693_CHG_REG_SAFEOUT_CTRL, \ |
| .vsel_mask = SAFEOUT_CTRL_SAFEOUT##_num##_MASK, \ |
| .enable_reg = MAX77693_CHG_REG_SAFEOUT_CTRL, \ |
| .enable_mask = SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK , \ |
| } |
| |
| static const struct regulator_desc regulators[] = { |
| regulator_desc_esafeout(1), |
| regulator_desc_esafeout(2), |
| { |
| .name = "CHARGER", |
| .id = MAX77693_CHARGER, |
| .ops = &max77693_charger_ops, |
| .type = REGULATOR_CURRENT, |
| .owner = THIS_MODULE, |
| .enable_reg = MAX77693_CHG_REG_CHG_CNFG_00, |
| .enable_mask = CHG_CNFG_00_CHG_MASK | |
| CHG_CNFG_00_BUCK_MASK, |
| }, |
| }; |
| |
| #ifdef CONFIG_OF |
| static int max77693_pmic_dt_parse_rdata(struct device *dev, |
| struct max77693_regulator_data **rdata) |
| { |
| struct device_node *np; |
| struct of_regulator_match *rmatch; |
| struct max77693_regulator_data *tmp; |
| int i, matched = 0; |
| |
| np = of_get_child_by_name(dev->parent->of_node, "regulators"); |
| if (!np) |
| return -EINVAL; |
| |
| rmatch = devm_kzalloc(dev, |
| sizeof(*rmatch) * ARRAY_SIZE(regulators), GFP_KERNEL); |
| if (!rmatch) { |
| of_node_put(np); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(regulators); i++) |
| rmatch[i].name = regulators[i].name; |
| |
| matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(regulators)); |
| of_node_put(np); |
| if (matched <= 0) |
| return matched; |
| *rdata = devm_kzalloc(dev, sizeof(**rdata) * matched, GFP_KERNEL); |
| if (!(*rdata)) |
| return -ENOMEM; |
| |
| tmp = *rdata; |
| |
| for (i = 0; i < matched; i++) { |
| tmp->initdata = rmatch[i].init_data; |
| tmp->of_node = rmatch[i].of_node; |
| tmp->id = regulators[i].id; |
| tmp++; |
| } |
| |
| return matched; |
| } |
| #else |
| static int max77693_pmic_dt_parse_rdata(struct device *dev, |
| struct max77693_regulator_data **rdata) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_OF */ |
| |
| static int max77693_pmic_init_rdata(struct device *dev, |
| struct max77693_regulator_data **rdata) |
| { |
| struct max77693_platform_data *pdata; |
| int num_regulators = 0; |
| |
| pdata = dev_get_platdata(dev->parent); |
| if (pdata) { |
| *rdata = pdata->regulators; |
| num_regulators = pdata->num_regulators; |
| } |
| |
| if (!(*rdata) && dev->parent->of_node) |
| num_regulators = max77693_pmic_dt_parse_rdata(dev, rdata); |
| |
| return num_regulators; |
| } |
| |
| static int max77693_pmic_probe(struct platform_device *pdev) |
| { |
| struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| struct max77693_regulator_data *rdata = NULL; |
| int num_rdata, i; |
| struct regulator_config config = { }; |
| |
| num_rdata = max77693_pmic_init_rdata(&pdev->dev, &rdata); |
| if (!rdata || num_rdata <= 0) { |
| dev_err(&pdev->dev, "No init data supplied.\n"); |
| return -ENODEV; |
| } |
| |
| config.dev = &pdev->dev; |
| config.regmap = iodev->regmap; |
| |
| for (i = 0; i < num_rdata; i++) { |
| int id = rdata[i].id; |
| struct regulator_dev *rdev; |
| |
| config.init_data = rdata[i].initdata; |
| config.of_node = rdata[i].of_node; |
| |
| rdev = devm_regulator_register(&pdev->dev, |
| ®ulators[id], &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, |
| "Failed to initialize regulator-%d\n", id); |
| return PTR_ERR(rdev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id max77693_pmic_id[] = { |
| {"max77693-pmic", 0}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(platform, max77693_pmic_id); |
| |
| static struct platform_driver max77693_pmic_driver = { |
| .driver = { |
| .name = "max77693-pmic", |
| }, |
| .probe = max77693_pmic_probe, |
| .id_table = max77693_pmic_id, |
| }; |
| |
| module_platform_driver(max77693_pmic_driver); |
| |
| MODULE_DESCRIPTION("MAXIM MAX77693 regulator driver"); |
| MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>"); |
| MODULE_LICENSE("GPL"); |