| Kernel driver ads1015 |
| ===================== |
| |
| Supported chips: |
| * Texas Instruments ADS1015 |
| Prefix: 'ads1015' |
| Datasheet: Publicly available at the Texas Instruments website : |
| http://focus.ti.com/lit/ds/symlink/ads1015.pdf |
| * Texas Instruments ADS1115 |
| Prefix: 'ads1115' |
| Datasheet: Publicly available at the Texas Instruments website : |
| http://focus.ti.com/lit/ds/symlink/ads1115.pdf |
| |
| Authors: |
| Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> |
| |
| Description |
| ----------- |
| |
| This driver implements support for the Texas Instruments ADS1015/ADS1115. |
| |
| This device is a 12/16-bit A-D converter with 4 inputs. |
| |
| The inputs can be used single ended or in certain differential combinations. |
| |
| The inputs can be made available by 8 sysfs input files in0_input - in7_input: |
| in0: Voltage over AIN0 and AIN1. |
| in1: Voltage over AIN0 and AIN3. |
| in2: Voltage over AIN1 and AIN3. |
| in3: Voltage over AIN2 and AIN3. |
| in4: Voltage over AIN0 and GND. |
| in5: Voltage over AIN1 and GND. |
| in6: Voltage over AIN2 and GND. |
| in7: Voltage over AIN3 and GND. |
| |
| Which inputs are available can be configured using platform data or devicetree. |
| |
| By default all inputs are exported. |
| |
| Platform Data |
| ------------- |
| |
| In linux/i2c/ads1015.h platform data is defined, channel_data contains |
| configuration data for the used input combinations: |
| - pga is the programmable gain amplifier (values are full scale) |
| 0: +/- 6.144 V |
| 1: +/- 4.096 V |
| 2: +/- 2.048 V |
| 3: +/- 1.024 V |
| 4: +/- 0.512 V |
| 5: +/- 0.256 V |
| - data_rate in samples per second |
| 0: 128 |
| 1: 250 |
| 2: 490 |
| 3: 920 |
| 4: 1600 |
| 5: 2400 |
| 6: 3300 |
| |
| Example: |
| struct ads1015_platform_data data = { |
| .channel_data = { |
| [2] = { .enabled = true, .pga = 1, .data_rate = 0 }, |
| [4] = { .enabled = true, .pga = 4, .data_rate = 5 }, |
| } |
| }; |
| |
| In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input |
| (FS +/- 0.512 V, 2400 SPS) would be created. |
| |
| Devicetree |
| ---------- |
| |
| Configuration is also possible via devicetree: |
| Documentation/devicetree/bindings/hwmon/ads1015.txt |