| /******************************************************************************* |
| This is the driver for the MAC 10/100 on-chip Ethernet controller |
| currently tested on all the ST boards based on STb7109 and stx7200 SoCs. |
| |
| DWC Ether MAC 10/100 Universal version 4.0 has been used for developing |
| this code. |
| |
| This contains the functions to handle the dma. |
| |
| Copyright (C) 2007-2009 STMicroelectronics Ltd |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms and conditions of the GNU General Public License, |
| version 2, as published by the Free Software Foundation. |
| |
| This program is distributed in the hope it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| The full GNU General Public License is included in this distribution in |
| the file called "COPYING". |
| |
| Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> |
| *******************************************************************************/ |
| |
| #include "dwmac100.h" |
| #include "dwmac_dma.h" |
| |
| static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, |
| u32 dma_rx) |
| { |
| u32 value = readl(ioaddr + DMA_BUS_MODE); |
| int limit; |
| |
| /* DMA SW reset */ |
| value |= DMA_BUS_MODE_SFT_RESET; |
| writel(value, ioaddr + DMA_BUS_MODE); |
| limit = 15000; |
| while (limit--) { |
| if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)) |
| break; |
| } |
| if (limit < 0) |
| return -EBUSY; |
| |
| /* Enable Application Access by writing to DMA CSR0 */ |
| writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT), |
| ioaddr + DMA_BUS_MODE); |
| |
| /* Mask interrupts by writing to CSR7 */ |
| writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); |
| |
| /* The base address of the RX/TX descriptor lists must be written into |
| * DMA CSR3 and CSR4, respectively. */ |
| writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); |
| writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); |
| |
| return 0; |
| } |
| |
| /* Store and Forward capability is not used at all.. |
| * The transmit threshold can be programmed by |
| * setting the TTC bits in the DMA control register.*/ |
| static void dwmac100_dma_operation_mode(void __iomem *ioaddr, int txmode, |
| int rxmode) |
| { |
| u32 csr6 = readl(ioaddr + DMA_CONTROL); |
| |
| if (txmode <= 32) |
| csr6 |= DMA_CONTROL_TTC_32; |
| else if (txmode <= 64) |
| csr6 |= DMA_CONTROL_TTC_64; |
| else |
| csr6 |= DMA_CONTROL_TTC_128; |
| |
| writel(csr6, ioaddr + DMA_CONTROL); |
| } |
| |
| static void dwmac100_dump_dma_regs(void __iomem *ioaddr) |
| { |
| int i; |
| |
| CHIP_DBG(KERN_DEBUG "DWMAC 100 DMA CSR\n"); |
| for (i = 0; i < 9; i++) |
| pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i, |
| (DMA_BUS_MODE + i * 4), |
| readl(ioaddr + DMA_BUS_MODE + i * 4)); |
| CHIP_DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n", |
| DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR)); |
| CHIP_DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n", |
| DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); |
| } |
| |
| /* DMA controller has two counters to track the number of |
| * the receive missed frames. */ |
| static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, |
| void __iomem *ioaddr) |
| { |
| struct net_device_stats *stats = (struct net_device_stats *)data; |
| u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR); |
| |
| if (unlikely(csr8)) { |
| if (csr8 & DMA_MISSED_FRAME_OVE) { |
| stats->rx_over_errors += 0x800; |
| x->rx_overflow_cntr += 0x800; |
| } else { |
| unsigned int ove_cntr; |
| ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17); |
| stats->rx_over_errors += ove_cntr; |
| x->rx_overflow_cntr += ove_cntr; |
| } |
| |
| if (csr8 & DMA_MISSED_FRAME_OVE_M) { |
| stats->rx_missed_errors += 0xffff; |
| x->rx_missed_cntr += 0xffff; |
| } else { |
| unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR); |
| stats->rx_missed_errors += miss_f; |
| x->rx_missed_cntr += miss_f; |
| } |
| } |
| } |
| |
| const struct stmmac_dma_ops dwmac100_dma_ops = { |
| .init = dwmac100_dma_init, |
| .dump_regs = dwmac100_dump_dma_regs, |
| .dma_mode = dwmac100_dma_operation_mode, |
| .dma_diagnostic_fr = dwmac100_dma_diagnostic_fr, |
| .enable_dma_transmission = dwmac_enable_dma_transmission, |
| .enable_dma_irq = dwmac_enable_dma_irq, |
| .disable_dma_irq = dwmac_disable_dma_irq, |
| .start_tx = dwmac_dma_start_tx, |
| .stop_tx = dwmac_dma_stop_tx, |
| .start_rx = dwmac_dma_start_rx, |
| .stop_rx = dwmac_dma_stop_rx, |
| .dma_interrupt = dwmac_dma_interrupt, |
| }; |