arch/arm/mach-davinci/board-da850-evm.c - kernel/msm-4.9 - Gitiles

 /*
  * TI DA850/OMAP-L138 EVM board
  *
  * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
  *
  * Derived from: arch/arm/mach-davinci/board-da830-evm.c
  * Original Copyrights follow:
  *
  * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/machine.h>

 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/nand.h>
 #include <mach/mux.h>

 #define DA850_EVM_PHY_MASK		0x1
 #define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */

 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)

 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)

 #define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)

 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "NOR filesystem",
 		.offset         = 0,
 		.size           = MTDPART_SIZ_FULL,
 		.mask_flags     = 0,
 	},
 };

 static struct physmap_flash_data da850_evm_norflash_data = {
 	.width		= 2,
 	.parts		= da850_evm_norflash_partition,
 	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
 };

 static struct resource da850_evm_norflash_resource[] = {
 	{
 		.start	= DA8XX_AEMIF_CS2_BASE,
 		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static struct platform_device da850_evm_norflash_device = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data  = &da850_evm_norflash_data,
 	},
 	.num_resources	= 1,
 	.resource	= da850_evm_norflash_resource,
 };

 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
  * (128K blocks). It may be used instead of the (default) SPI flash
  * to boot, using TI's tools to install the secondary boot loader
  * (UBL) and U-Boot.
  */
 struct mtd_partition da850_evm_nandflash_partition[] = {
 	{
 		.name		= "u-boot env",
 		.offset		= 0,
 		.size		= SZ_128K,
 		.mask_flags	= MTD_WRITEABLE,
 	 },
 	{
 		.name		= "UBL",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= SZ_128K,
 		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "u-boot",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 4 * SZ_128K,
 		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "kernel",
 		.offset		= 0x200000,
 		.size		= SZ_2M,
 		.mask_flags	= 0,
 	},
 	{
 		.name		= "filesystem",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= MTDPART_SIZ_FULL,
 		.mask_flags	= 0,
 	},
 };

 static struct davinci_nand_pdata da850_evm_nandflash_data = {
 	.parts		= da850_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
 	.options	= NAND_USE_FLASH_BBT,
 };

 static struct resource da850_evm_nandflash_resource[] = {
 	{
 		.start	= DA8XX_AEMIF_CS3_BASE,
 		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
 		.start	= DA8XX_AEMIF_CTL_BASE,
 		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static struct platform_device da850_evm_nandflash_device = {
 	.name		= "davinci_nand",
 	.id		= 1,
 	.dev		= {
 		.platform_data	= &da850_evm_nandflash_data,
 	},
 	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
 	.resource	= da850_evm_nandflash_resource,
 };

 static struct platform_device *da850_evm_devices[] __initdata = {
 	&da850_evm_nandflash_device,
 	&da850_evm_norflash_device,
 };

 #define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
 #define DA8XX_AEMIF_ASIZE_16BIT		0x1

 static void __init da850_evm_init_nor(void)
 {
 	void __iomem *aemif_addr;

 	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);

 	/* Configure data bus width of CS2 to 16 bit */
 	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
 		DA8XX_AEMIF_ASIZE_16BIT,
 		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);

 	iounmap(aemif_addr);
 }

 static u32 ui_card_detected;

 #if defined(CONFIG_MMC_DAVINCI) || \
     defined(CONFIG_MMC_DAVINCI_MODULE)
 #define HAS_MMC 1
 #else
 #define HAS_MMC 0
 #endif

 static __init void da850_evm_setup_nor_nand(void)
 {
 	int ret = 0;

 	if (ui_card_detected & !HAS_MMC) {
 		ret = da8xx_pinmux_setup(da850_nand_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nand mux setup failed: "
 					"%d\n", ret);

 		ret = da8xx_pinmux_setup(da850_nor_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
 				ret);

 		da850_evm_init_nor();

 		platform_add_devices(da850_evm_devices,
 					ARRAY_SIZE(da850_evm_devices));
 	}
 }

 #ifdef CONFIG_DA850_UI_RMII
 static inline void da850_evm_setup_emac_rmii(int rmii_sel)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;

 	soc_info->emac_pdata->rmii_en = 1;
 	gpio_set_value(rmii_sel, 0);
 }
 #else
 static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
 #endif

 static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 						unsigned ngpio, void *c)
 {
 	int sel_a, sel_b, sel_c, ret;

 	sel_a = gpio + 7;
 	sel_b = gpio + 6;
 	sel_c = gpio + 5;

 	ret = gpio_request(sel_a, "sel_a");
 	if (ret) {
 		pr_warning("Cannot open UI expander pin %d\n", sel_a);
 		goto exp_setup_sela_fail;
 	}

 	ret = gpio_request(sel_b, "sel_b");
 	if (ret) {
 		pr_warning("Cannot open UI expander pin %d\n", sel_b);
 		goto exp_setup_selb_fail;
 	}

 	ret = gpio_request(sel_c, "sel_c");
 	if (ret) {
 		pr_warning("Cannot open UI expander pin %d\n", sel_c);
 		goto exp_setup_selc_fail;
 	}

 	/* deselect all functionalities */
 	gpio_direction_output(sel_a, 1);
 	gpio_direction_output(sel_b, 1);
 	gpio_direction_output(sel_c, 1);

 	ui_card_detected = 1;
 	pr_info("DA850/OMAP-L138 EVM UI card detected\n");

 	da850_evm_setup_nor_nand();

 	da850_evm_setup_emac_rmii(sel_a);

 	return 0;

 exp_setup_selc_fail:
 	gpio_free(sel_b);
 exp_setup_selb_fail:
 	gpio_free(sel_a);
 exp_setup_sela_fail:
 	return ret;
 }

 static int da850_evm_ui_expander_teardown(struct i2c_client *client,
 					unsigned gpio, unsigned ngpio, void *c)
 {
 	/* deselect all functionalities */
 	gpio_set_value(gpio + 5, 1);
 	gpio_set_value(gpio + 6, 1);
 	gpio_set_value(gpio + 7, 1);

 	gpio_free(gpio + 5);
 	gpio_free(gpio + 6);
 	gpio_free(gpio + 7);

 	return 0;
 }

 static struct pca953x_platform_data da850_evm_ui_expander_info = {
 	.gpio_base	= DAVINCI_N_GPIO,
 	.setup		= da850_evm_ui_expander_setup,
 	.teardown	= da850_evm_ui_expander_teardown,
 };

 static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
 	},
 	{
 		I2C_BOARD_INFO("tca6416", 0x20),
 		.platform_data = &da850_evm_ui_expander_info,
 	},
 };

 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
 };

 static struct davinci_uart_config da850_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };

 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
 	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
 };

 static struct snd_platform_data da850_evm_snd_data = {
 	.tx_dma_offset	= 0x2000,
 	.rx_dma_offset	= 0x2000,
 	.op_mode	= DAVINCI_MCASP_IIS_MODE,
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
 	.eventq_no	= EVENTQ_1,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,
 };

 static int da850_evm_mmc_get_ro(int index)
 {
 	return gpio_get_value(DA850_MMCSD_WP_PIN);
 }

 static int da850_evm_mmc_get_cd(int index)
 {
 	return !gpio_get_value(DA850_MMCSD_CD_PIN);
 }

 static struct davinci_mmc_config da850_mmc_config = {
 	.get_ro		= da850_evm_mmc_get_ro,
 	.get_cd		= da850_evm_mmc_get_cd,
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.version	= MMC_CTLR_VERSION_2,
 };

 static void da850_panel_power_ctrl(int val)
 {
 	/* lcd backlight */
 	gpio_set_value(DA850_LCD_BL_PIN, val);

 	/* lcd power */
 	gpio_set_value(DA850_LCD_PWR_PIN, val);
 }

 static int da850_lcd_hw_init(void)
 {
 	int status;

 	status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
 	if (status < 0)
 		return status;

 	status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
 	if (status < 0) {
 		gpio_free(DA850_LCD_BL_PIN);
 		return status;
 	}

 	gpio_direction_output(DA850_LCD_BL_PIN, 0);
 	gpio_direction_output(DA850_LCD_PWR_PIN, 0);

 	/* Switch off panel power and backlight */
 	da850_panel_power_ctrl(0);

 	/* Switch on panel power and backlight */
 	da850_panel_power_ctrl(1);

 	return 0;
 }

 /* TPS65070 voltage regulator support */

 /* 3.3V */
 struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
 	{
 		.supply = "usb0_vdda33",
 	},
 	{
 		.supply = "usb1_vdda33",
 	},
 };

 /* 3.3V or 1.8V */
 struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
 	{
 		.supply = "dvdd3318_a",
 	},
 	{
 		.supply = "dvdd3318_b",
 	},
 	{
 		.supply = "dvdd3318_c",
 	},
 };

 /* 1.2V */
 struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
 	{
 		.supply = "cvdd",
 	},
 };

 /* 1.8V LDO */
 struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
 	{
 		.supply = "sata_vddr",
 	},
 	{
 		.supply = "usb0_vdda18",
 	},
 	{
 		.supply = "usb1_vdda18",
 	},
 	{
 		.supply = "ddr_dvdd18",
 	},
 };

 /* 1.2V LDO */
 struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
 	{
 		.supply = "sata_vdd",
 	},
 	{
 		.supply = "pll0_vdda",
 	},
 	{
 		.supply = "pll1_vdda",
 	},
 	{
 		.supply = "usbs_cvdd",
 	},
 	{
 		.supply = "vddarnwa1",
 	},
 };

 struct regulator_init_data tps65070_regulator_data[] = {
 	/* dcdc1 */
 	{
 		.constraints = {
 			.min_uV = 3150000,
 			.max_uV = 3450000,
 			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 				REGULATOR_CHANGE_STATUS),
 			.boot_on = 1,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
 		.consumer_supplies = tps65070_dcdc1_consumers,
 	},

 	/* dcdc2 */
 	{
 		.constraints = {
 			.min_uV = 1710000,
 			.max_uV = 3450000,
 			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 				REGULATOR_CHANGE_STATUS),
 			.boot_on = 1,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
 		.consumer_supplies = tps65070_dcdc2_consumers,
 	},

 	/* dcdc3 */
 	{
 		.constraints = {
 			.min_uV = 950000,
 			.max_uV = 1320000,
 			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 				REGULATOR_CHANGE_STATUS),
 			.boot_on = 1,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
 		.consumer_supplies = tps65070_dcdc3_consumers,
 	},

 	/* ldo1 */
 	{
 		.constraints = {
 			.min_uV = 1710000,
 			.max_uV = 1890000,
 			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 				REGULATOR_CHANGE_STATUS),
 			.boot_on = 1,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
 		.consumer_supplies = tps65070_ldo1_consumers,
 	},

 	/* ldo2 */
 	{
 		.constraints = {
 			.min_uV = 1140000,
 			.max_uV = 1320000,
 			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 				REGULATOR_CHANGE_STATUS),
 			.boot_on = 1,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
 		.consumer_supplies = tps65070_ldo2_consumers,
 	},
 };

 static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
 	{
 		I2C_BOARD_INFO("tps6507x", 0x48),
 		.platform_data = &tps65070_regulator_data[0],
 	},
 };

 static int __init pmic_tps65070_init(void)
 {
 	return i2c_register_board_info(1, da850evm_tps65070_info,
 					ARRAY_SIZE(da850evm_tps65070_info));
 }

 static const short da850_evm_lcdc_pins[] = {
 	DA850_GPIO2_8, DA850_GPIO2_15,
 	-1
 };

 static int __init da850_evm_config_emac(void)
 {
 	void __iomem *cfg_chip3_base;
 	int ret;
 	u32 val;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u8 rmii_en = soc_info->emac_pdata->rmii_en;

 	if (!machine_is_davinci_da850_evm())
 		return 0;

 	cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);

 	val = __raw_readl(cfg_chip3_base);

 	if (rmii_en) {
 		val |= BIT(8);
 		ret = da8xx_pinmux_setup(da850_rmii_pins);
 		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
 							" functional\n");
 	} else {
 		val &= ~BIT(8);
 		ret = da8xx_pinmux_setup(da850_cpgmac_pins);
 		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
 							" functional\n");
 	}

 	if (ret)
 		pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
 				ret);

 	/* configure the CFGCHIP3 register for RMII or MII */
 	__raw_writel(val, cfg_chip3_base);

 	ret = davinci_cfg_reg(DA850_GPIO2_6);
 	if (ret)
 		pr_warning("da850_evm_init:GPIO(2,6) mux setup "
 							"failed\n");

 	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
 	if (ret) {
 		pr_warning("Cannot open GPIO %d\n",
 					DA850_MII_MDIO_CLKEN_PIN);
 		return ret;
 	}

 	/* Enable/Disable MII MDIO clock */
 	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);

 	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;

 	ret = da8xx_register_emac();
 	if (ret)
 		pr_warning("da850_evm_init: emac registration failed: %d\n",
 				ret);

 	return 0;
 }
 device_initcall(da850_evm_config_emac);

 static __init void da850_evm_init(void)
 {
 	int ret;

 	ret = pmic_tps65070_init();
 	if (ret)
 		pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
 				ret);

 	ret = da8xx_register_edma();
 	if (ret)
 		pr_warning("da850_evm_init: edma registration failed: %d\n",
 				ret);

 	ret = da8xx_pinmux_setup(da850_i2c0_pins);
 	if (ret)
 		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
 				ret);

 	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
 	if (ret)
 		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
 				ret);


 	ret = da8xx_register_watchdog();
 	if (ret)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);

 	if (HAS_MMC) {
 		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
 					" %d\n", ret);

 		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
 		if (ret)
 			pr_warning("da850_evm_init: can not open GPIO %d\n",
 					DA850_MMCSD_CD_PIN);
 		gpio_direction_input(DA850_MMCSD_CD_PIN);

 		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
 		if (ret)
 			pr_warning("da850_evm_init: can not open GPIO %d\n",
 					DA850_MMCSD_WP_PIN);
 		gpio_direction_input(DA850_MMCSD_WP_PIN);

 		ret = da8xx_register_mmcsd0(&da850_mmc_config);
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 registration failed:"
 					" %d\n", ret);
 	}

 	davinci_serial_init(&da850_evm_uart_config);

 	i2c_register_board_info(1, da850_evm_i2c_devices,
 			ARRAY_SIZE(da850_evm_i2c_devices));

 	/*
 	 * shut down uart 0 and 1; they are not used on the board and
 	 * accessing them causes endless "too much work in irq53" messages
 	 * with arago fs
 	 */
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);

 	ret = da8xx_pinmux_setup(da850_mcasp_pins);
 	if (ret)
 		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 				ret);

 	da8xx_register_mcasp(0, &da850_evm_snd_data);

 	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
 	if (ret)
 		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);

 	/* Handle board specific muxing for LCD here */
 	ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
 	if (ret)
 		pr_warning("da850_evm_init: evm specific lcd mux setup "
 				"failed: %d\n",	ret);

 	ret = da850_lcd_hw_init();
 	if (ret)
 		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
 				ret);

 	sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
 	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
 	if (ret)
 		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
 				ret);

 	ret = da8xx_register_rtc();
 	if (ret)
 		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);

 	ret = da850_register_cpufreq();
 	if (ret)
 		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
 				ret);

 	ret = da8xx_register_cpuidle();
 	if (ret)
 		pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
 				ret);
 }

 #ifdef CONFIG_SERIAL_8250_CONSOLE
 static int __init da850_evm_console_init(void)
 {
 	return add_preferred_console("ttyS", 2, "115200");
 }
 console_initcall(da850_evm_console_init);
 #endif

 static __init void da850_evm_irq_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;

 	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
 			soc_info->intc_irq_prios);
 }

 static void __init da850_evm_map_io(void)
 {
 	da850_init();
 }

 MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da850_evm_map_io,
 	.init_irq	= da850_evm_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
 MACHINE_END
	/*
	* TI DA850/OMAP-L138 EVM board
	*
	* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
	*
	* Derived from: arch/arm/mach-davinci/board-da830-evm.c
	* Original Copyrights follow:
	*
	* 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
	* the terms of the GNU General Public License version 2. This program
	* is licensed "as is" without any warranty of any kind, whether express
	* or implied.
	*/
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/console.h>
	#include <linux/i2c.h>
	#include <linux/i2c/at24.h>
	#include <linux/i2c/pca953x.h>
	#include <linux/gpio.h>
	#include <linux/platform_device.h>
	#include <linux/mtd/mtd.h>
	#include <linux/mtd/nand.h>
	#include <linux/mtd/partitions.h>
	#include <linux/mtd/physmap.h>
	#include <linux/regulator/machine.h>

	#include <asm/mach-types.h>
	#include <asm/mach/arch.h>

	#include <mach/cp_intc.h>
	#include <mach/da8xx.h>
	#include <mach/nand.h>
	#include <mach/mux.h>

	#define DA850_EVM_PHY_MASK 0x1
	#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */

	#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
	#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)

	#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
	#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)

	#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)

	static struct mtd_partition da850_evm_norflash_partition[] = {
	{
	.name = "NOR filesystem",
	.offset = 0,
	.size = MTDPART_SIZ_FULL,
	.mask_flags = 0,
	},
	};

	static struct physmap_flash_data da850_evm_norflash_data = {
	.width = 2,
	.parts = da850_evm_norflash_partition,
	.nr_parts = ARRAY_SIZE(da850_evm_norflash_partition),
	};

	static struct resource da850_evm_norflash_resource[] = {
	{
	.start = DA8XX_AEMIF_CS2_BASE,
	.end = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct platform_device da850_evm_norflash_device = {
	.name = "physmap-flash",
	.id = 0,
	.dev = {
	.platform_data = &da850_evm_norflash_data,
	},
	.num_resources = 1,
	.resource = da850_evm_norflash_resource,
	};

	/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
	* (128K blocks). It may be used instead of the (default) SPI flash
	* to boot, using TI's tools to install the secondary boot loader
	* (UBL) and U-Boot.
	*/
	struct mtd_partition da850_evm_nandflash_partition[] = {
	{
	.name = "u-boot env",
	.offset = 0,
	.size = SZ_128K,
	.mask_flags = MTD_WRITEABLE,
	},
	{
	.name = "UBL",
	.offset = MTDPART_OFS_APPEND,
	.size = SZ_128K,
	.mask_flags = MTD_WRITEABLE,
	},
	{
	.name = "u-boot",
	.offset = MTDPART_OFS_APPEND,
	.size = 4 * SZ_128K,
	.mask_flags = MTD_WRITEABLE,
	},
	{
	.name = "kernel",
	.offset = 0x200000,
	.size = SZ_2M,
	.mask_flags = 0,
	},
	{
	.name = "filesystem",
	.offset = MTDPART_OFS_APPEND,
	.size = MTDPART_SIZ_FULL,
	.mask_flags = 0,
	},
	};

	static struct davinci_nand_pdata da850_evm_nandflash_data = {
	.parts = da850_evm_nandflash_partition,
	.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
	.ecc_mode = NAND_ECC_HW,
	.options = NAND_USE_FLASH_BBT,
	};

	static struct resource da850_evm_nandflash_resource[] = {
	{
	.start = DA8XX_AEMIF_CS3_BASE,
	.end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
	.flags = IORESOURCE_MEM,
	},
	{
	.start = DA8XX_AEMIF_CTL_BASE,
	.end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct platform_device da850_evm_nandflash_device = {
	.name = "davinci_nand",
	.id = 1,
	.dev = {
	.platform_data = &da850_evm_nandflash_data,
	},
	.num_resources = ARRAY_SIZE(da850_evm_nandflash_resource),
	.resource = da850_evm_nandflash_resource,
	};

	static struct platform_device *da850_evm_devices[] __initdata = {
	&da850_evm_nandflash_device,
	&da850_evm_norflash_device,
	};

	#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
	#define DA8XX_AEMIF_ASIZE_16BIT 0x1

	static void __init da850_evm_init_nor(void)
	{
	void __iomem *aemif_addr;

	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);

	/* Configure data bus width of CS2 to 16 bit */
	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) \|
	DA8XX_AEMIF_ASIZE_16BIT,
	aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);

	iounmap(aemif_addr);
	}

	static u32 ui_card_detected;

	#if defined(CONFIG_MMC_DAVINCI) \|\| \
	defined(CONFIG_MMC_DAVINCI_MODULE)
	#define HAS_MMC 1
	#else
	#define HAS_MMC 0
	#endif

	static __init void da850_evm_setup_nor_nand(void)
	{
	int ret = 0;

	if (ui_card_detected & !HAS_MMC) {
	ret = da8xx_pinmux_setup(da850_nand_pins);
	if (ret)
	pr_warning("da850_evm_init: nand mux setup failed: "
	"%d\n", ret);

	ret = da8xx_pinmux_setup(da850_nor_pins);
	if (ret)
	pr_warning("da850_evm_init: nor mux setup failed: %d\n",
	ret);

	da850_evm_init_nor();

	platform_add_devices(da850_evm_devices,
	ARRAY_SIZE(da850_evm_devices));
	}
	}

	#ifdef CONFIG_DA850_UI_RMII
	static inline void da850_evm_setup_emac_rmii(int rmii_sel)
	{
	struct davinci_soc_info *soc_info = &davinci_soc_info;

	soc_info->emac_pdata->rmii_en = 1;
	gpio_set_value(rmii_sel, 0);
	}
	#else
	static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
	#endif

	static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
	unsigned ngpio, void *c)
	{
	int sel_a, sel_b, sel_c, ret;

	sel_a = gpio + 7;
	sel_b = gpio + 6;
	sel_c = gpio + 5;

	ret = gpio_request(sel_a, "sel_a");
	if (ret) {
	pr_warning("Cannot open UI expander pin %d\n", sel_a);
	goto exp_setup_sela_fail;
	}

	ret = gpio_request(sel_b, "sel_b");
	if (ret) {
	pr_warning("Cannot open UI expander pin %d\n", sel_b);
	goto exp_setup_selb_fail;
	}

	ret = gpio_request(sel_c, "sel_c");
	if (ret) {
	pr_warning("Cannot open UI expander pin %d\n", sel_c);
	goto exp_setup_selc_fail;
	}

	/* deselect all functionalities */
	gpio_direction_output(sel_a, 1);
	gpio_direction_output(sel_b, 1);
	gpio_direction_output(sel_c, 1);

	ui_card_detected = 1;
	pr_info("DA850/OMAP-L138 EVM UI card detected\n");

	da850_evm_setup_nor_nand();

	da850_evm_setup_emac_rmii(sel_a);

	return 0;

	exp_setup_selc_fail:
	gpio_free(sel_b);
	exp_setup_selb_fail:
	gpio_free(sel_a);
	exp_setup_sela_fail:
	return ret;
	}

	static int da850_evm_ui_expander_teardown(struct i2c_client *client,
	unsigned gpio, unsigned ngpio, void *c)
	{
	/* deselect all functionalities */
	gpio_set_value(gpio + 5, 1);
	gpio_set_value(gpio + 6, 1);
	gpio_set_value(gpio + 7, 1);

	gpio_free(gpio + 5);
	gpio_free(gpio + 6);
	gpio_free(gpio + 7);

	return 0;
	}

	static struct pca953x_platform_data da850_evm_ui_expander_info = {
	.gpio_base = DAVINCI_N_GPIO,
	.setup = da850_evm_ui_expander_setup,
	.teardown = da850_evm_ui_expander_teardown,
	};

	static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
	{
	I2C_BOARD_INFO("tlv320aic3x", 0x18),
	},
	{
	I2C_BOARD_INFO("tca6416", 0x20),
	.platform_data = &da850_evm_ui_expander_info,
	},
	};

	static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
	.bus_freq = 100, /* kHz */
	.bus_delay = 0, /* usec */
	};

	static struct davinci_uart_config da850_evm_uart_config __initdata = {
	.enabled_uarts = 0x7,
	};

	/* davinci da850 evm audio machine driver */
	static u8 da850_iis_serializer_direction[] = {
	INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
	INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
	INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE,
	RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
	};

	static struct snd_platform_data da850_evm_snd_data = {
	.tx_dma_offset = 0x2000,
	.rx_dma_offset = 0x2000,
	.op_mode = DAVINCI_MCASP_IIS_MODE,
	.num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
	.tdm_slots = 2,
	.serial_dir = da850_iis_serializer_direction,
	.eventq_no = EVENTQ_1,
	.version = MCASP_VERSION_2,
	.txnumevt = 1,
	.rxnumevt = 1,
	};

	static int da850_evm_mmc_get_ro(int index)
	{
	return gpio_get_value(DA850_MMCSD_WP_PIN);
	}

	static int da850_evm_mmc_get_cd(int index)
	{
	return !gpio_get_value(DA850_MMCSD_CD_PIN);
	}

	static struct davinci_mmc_config da850_mmc_config = {
	.get_ro = da850_evm_mmc_get_ro,
	.get_cd = da850_evm_mmc_get_cd,
	.wires = 4,
	.max_freq = 50000000,
	.caps = MMC_CAP_MMC_HIGHSPEED \| MMC_CAP_SD_HIGHSPEED,
	.version = MMC_CTLR_VERSION_2,
	};

	static void da850_panel_power_ctrl(int val)
	{
	/* lcd backlight */
	gpio_set_value(DA850_LCD_BL_PIN, val);

	/* lcd power */
	gpio_set_value(DA850_LCD_PWR_PIN, val);
	}

	static int da850_lcd_hw_init(void)
	{
	int status;

	status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
	if (status < 0)
	return status;

	status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
	if (status < 0) {
	gpio_free(DA850_LCD_BL_PIN);
	return status;
	}

	gpio_direction_output(DA850_LCD_BL_PIN, 0);
	gpio_direction_output(DA850_LCD_PWR_PIN, 0);

	/* Switch off panel power and backlight */
	da850_panel_power_ctrl(0);

	/* Switch on panel power and backlight */
	da850_panel_power_ctrl(1);

	return 0;
	}

	/* TPS65070 voltage regulator support */

	/* 3.3V */
	struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
	{
	.supply = "usb0_vdda33",
	},
	{
	.supply = "usb1_vdda33",
	},
	};

	/* 3.3V or 1.8V */
	struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
	{
	.supply = "dvdd3318_a",
	},
	{
	.supply = "dvdd3318_b",
	},
	{
	.supply = "dvdd3318_c",
	},
	};

	/* 1.2V */
	struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
	{
	.supply = "cvdd",
	},
	};

	/* 1.8V LDO */
	struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
	{
	.supply = "sata_vddr",
	},
	{
	.supply = "usb0_vdda18",
	},
	{
	.supply = "usb1_vdda18",
	},
	{
	.supply = "ddr_dvdd18",
	},
	};

	/* 1.2V LDO */
	struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
	{
	.supply = "sata_vdd",
	},
	{
	.supply = "pll0_vdda",
	},
	{
	.supply = "pll1_vdda",
	},
	{
	.supply = "usbs_cvdd",
	},
	{
	.supply = "vddarnwa1",
	},
	};

	struct regulator_init_data tps65070_regulator_data[] = {
	/* dcdc1 */
	{
	.constraints = {
	.min_uV = 3150000,
	.max_uV = 3450000,
	.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE \|
	REGULATOR_CHANGE_STATUS),
	.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
	.consumer_supplies = tps65070_dcdc1_consumers,
	},

	/* dcdc2 */
	{
	.constraints = {
	.min_uV = 1710000,
	.max_uV = 3450000,
	.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE \|
	REGULATOR_CHANGE_STATUS),
	.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
	.consumer_supplies = tps65070_dcdc2_consumers,
	},

	/* dcdc3 */
	{
	.constraints = {
	.min_uV = 950000,
	.max_uV = 1320000,
	.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE \|
	REGULATOR_CHANGE_STATUS),
	.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
	.consumer_supplies = tps65070_dcdc3_consumers,
	},

	/* ldo1 */
	{
	.constraints = {
	.min_uV = 1710000,
	.max_uV = 1890000,
	.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE \|
	REGULATOR_CHANGE_STATUS),
	.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
	.consumer_supplies = tps65070_ldo1_consumers,
	},

	/* ldo2 */
	{
	.constraints = {
	.min_uV = 1140000,
	.max_uV = 1320000,
	.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE \|
	REGULATOR_CHANGE_STATUS),
	.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
	.consumer_supplies = tps65070_ldo2_consumers,
	},
	};

	static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
	{
	I2C_BOARD_INFO("tps6507x", 0x48),
	.platform_data = &tps65070_regulator_data[0],
	},
	};

	static int __init pmic_tps65070_init(void)
	{
	return i2c_register_board_info(1, da850evm_tps65070_info,
	ARRAY_SIZE(da850evm_tps65070_info));
	}

	static const short da850_evm_lcdc_pins[] = {
	DA850_GPIO2_8, DA850_GPIO2_15,
	-1
	};

	static int __init da850_evm_config_emac(void)
	{
	void __iomem *cfg_chip3_base;
	int ret;
	u32 val;
	struct davinci_soc_info *soc_info = &davinci_soc_info;
	u8 rmii_en = soc_info->emac_pdata->rmii_en;

	if (!machine_is_davinci_da850_evm())
	return 0;

	cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);

	val = __raw_readl(cfg_chip3_base);

	if (rmii_en) {
	val \|= BIT(8);
	ret = da8xx_pinmux_setup(da850_rmii_pins);
	pr_info("EMAC: RMII PHY configured, MII PHY will not be"
	" functional\n");
	} else {
	val &= ~BIT(8);
	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
	pr_info("EMAC: MII PHY configured, RMII PHY will not be"
	" functional\n");
	}

	if (ret)
	pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
	ret);

	/* configure the CFGCHIP3 register for RMII or MII */
	__raw_writel(val, cfg_chip3_base);

	ret = davinci_cfg_reg(DA850_GPIO2_6);
	if (ret)
	pr_warning("da850_evm_init:GPIO(2,6) mux setup "
	"failed\n");

	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
	if (ret) {
	pr_warning("Cannot open GPIO %d\n",
	DA850_MII_MDIO_CLKEN_PIN);
	return ret;
	}

	/* Enable/Disable MII MDIO clock */
	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);

	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;

	ret = da8xx_register_emac();
	if (ret)
	pr_warning("da850_evm_init: emac registration failed: %d\n",
	ret);

	return 0;
	}
	device_initcall(da850_evm_config_emac);

	static __init void da850_evm_init(void)
	{
	int ret;

	ret = pmic_tps65070_init();
	if (ret)
	pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
	ret);

	ret = da8xx_register_edma();
	if (ret)
	pr_warning("da850_evm_init: edma registration failed: %d\n",
	ret);

	ret = da8xx_pinmux_setup(da850_i2c0_pins);
	if (ret)
	pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
	ret);

	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
	if (ret)
	pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
	ret);


	ret = da8xx_register_watchdog();
	if (ret)
	pr_warning("da830_evm_init: watchdog registration failed: %d\n",
	ret);

	if (HAS_MMC) {
	ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
	if (ret)
	pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
	" %d\n", ret);

	ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
	if (ret)
	pr_warning("da850_evm_init: can not open GPIO %d\n",
	DA850_MMCSD_CD_PIN);
	gpio_direction_input(DA850_MMCSD_CD_PIN);

	ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
	if (ret)
	pr_warning("da850_evm_init: can not open GPIO %d\n",
	DA850_MMCSD_WP_PIN);
	gpio_direction_input(DA850_MMCSD_WP_PIN);

	ret = da8xx_register_mmcsd0(&da850_mmc_config);
	if (ret)
	pr_warning("da850_evm_init: mmcsd0 registration failed:"
	" %d\n", ret);
	}

	davinci_serial_init(&da850_evm_uart_config);

	i2c_register_board_info(1, da850_evm_i2c_devices,
	ARRAY_SIZE(da850_evm_i2c_devices));

	/*
	* shut down uart 0 and 1; they are not used on the board and
	* accessing them causes endless "too much work in irq53" messages
	* with arago fs
	*/
	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);

	ret = da8xx_pinmux_setup(da850_mcasp_pins);
	if (ret)
	pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
	ret);

	da8xx_register_mcasp(0, &da850_evm_snd_data);

	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
	if (ret)
	pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
	ret);

	/* Handle board specific muxing for LCD here */
	ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
	if (ret)
	pr_warning("da850_evm_init: evm specific lcd mux setup "
	"failed: %d\n", ret);

	ret = da850_lcd_hw_init();
	if (ret)
	pr_warning("da850_evm_init: lcd initialization failed: %d\n",
	ret);

	sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
	if (ret)
	pr_warning("da850_evm_init: lcdc registration failed: %d\n",
	ret);

	ret = da8xx_register_rtc();
	if (ret)
	pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);

	ret = da850_register_cpufreq();
	if (ret)
	pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
	ret);

	ret = da8xx_register_cpuidle();
	if (ret)
	pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
	ret);
	}

	#ifdef CONFIG_SERIAL_8250_CONSOLE
	static int __init da850_evm_console_init(void)
	{
	return add_preferred_console("ttyS", 2, "115200");
	}
	console_initcall(da850_evm_console_init);
	#endif

	static __init void da850_evm_irq_init(void)
	{
	struct davinci_soc_info *soc_info = &davinci_soc_info;

	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
	soc_info->intc_irq_prios);
	}

	static void __init da850_evm_map_io(void)
	{
	da850_init();
	}

	MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
	.phys_io = IO_PHYS,
	.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
	.boot_params = (DA8XX_DDR_BASE + 0x100),
	.map_io = da850_evm_map_io,
	.init_irq = da850_evm_irq_init,
	.timer = &davinci_timer,
	.init_machine = da850_evm_init,
	MACHINE_END