| /* |
| * Fusb300 UDC (USB gadget) |
| * |
| * Copyright (C) 2010 Faraday Technology Corp. |
| * |
| * Author : Yuan-hsin Chen <yhchen@faraday-tech.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| */ |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| |
| #include "fusb300_udc.h" |
| |
| MODULE_DESCRIPTION("FUSB300 USB gadget driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>"); |
| MODULE_ALIAS("platform:fusb300_udc"); |
| |
| #define DRIVER_VERSION "20 October 2010" |
| |
| static const char udc_name[] = "fusb300_udc"; |
| static const char * const fusb300_ep_name[] = { |
| "ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9", |
| "ep10", "ep11", "ep12", "ep13", "ep14", "ep15" |
| }; |
| |
| static void done(struct fusb300_ep *ep, struct fusb300_request *req, |
| int status); |
| |
| static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset, |
| u32 value) |
| { |
| u32 reg = ioread32(fusb300->reg + offset); |
| |
| reg |= value; |
| iowrite32(reg, fusb300->reg + offset); |
| } |
| |
| static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset, |
| u32 value) |
| { |
| u32 reg = ioread32(fusb300->reg + offset); |
| |
| reg &= ~value; |
| iowrite32(reg, fusb300->reg + offset); |
| } |
| |
| |
| static void fusb300_ep_setting(struct fusb300_ep *ep, |
| struct fusb300_ep_info info) |
| { |
| ep->epnum = info.epnum; |
| ep->type = info.type; |
| } |
| |
| static int fusb300_ep_release(struct fusb300_ep *ep) |
| { |
| if (!ep->epnum) |
| return 0; |
| ep->epnum = 0; |
| ep->stall = 0; |
| ep->wedged = 0; |
| return 0; |
| } |
| |
| static void fusb300_set_fifo_entry(struct fusb300 *fusb300, |
| u32 ep) |
| { |
| u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); |
| |
| val &= ~FUSB300_EPSET1_FIFOENTRY_MSK; |
| val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM); |
| iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); |
| } |
| |
| static void fusb300_set_start_entry(struct fusb300 *fusb300, |
| u8 ep) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); |
| u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM; |
| |
| reg &= ~FUSB300_EPSET1_START_ENTRY_MSK ; |
| reg |= FUSB300_EPSET1_START_ENTRY(start_entry); |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); |
| if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) { |
| fusb300->fifo_entry_num = 0; |
| fusb300->addrofs = 0; |
| pr_err("fifo entry is over the maximum number!\n"); |
| } else |
| fusb300->fifo_entry_num++; |
| } |
| |
| /* set fusb300_set_start_entry first before fusb300_set_epaddrofs */ |
| static void fusb300_set_epaddrofs(struct fusb300 *fusb300, |
| struct fusb300_ep_info info) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); |
| |
| reg &= ~FUSB300_EPSET2_ADDROFS_MSK; |
| reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs); |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); |
| fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM; |
| } |
| |
| static void ep_fifo_setting(struct fusb300 *fusb300, |
| struct fusb300_ep_info info) |
| { |
| fusb300_set_fifo_entry(fusb300, info.epnum); |
| fusb300_set_start_entry(fusb300, info.epnum); |
| fusb300_set_epaddrofs(fusb300, info); |
| } |
| |
| static void fusb300_set_eptype(struct fusb300 *fusb300, |
| struct fusb300_ep_info info) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); |
| |
| reg &= ~FUSB300_EPSET1_TYPE_MSK; |
| reg |= FUSB300_EPSET1_TYPE(info.type); |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); |
| } |
| |
| static void fusb300_set_epdir(struct fusb300 *fusb300, |
| struct fusb300_ep_info info) |
| { |
| u32 reg; |
| |
| if (!info.dir_in) |
| return; |
| reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); |
| reg &= ~FUSB300_EPSET1_DIR_MSK; |
| reg |= FUSB300_EPSET1_DIRIN; |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); |
| } |
| |
| static void fusb300_set_ep_active(struct fusb300 *fusb300, |
| u8 ep) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); |
| |
| reg |= FUSB300_EPSET1_ACTEN; |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); |
| } |
| |
| static void fusb300_set_epmps(struct fusb300 *fusb300, |
| struct fusb300_ep_info info) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); |
| |
| reg &= ~FUSB300_EPSET2_MPS_MSK; |
| reg |= FUSB300_EPSET2_MPS(info.maxpacket); |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); |
| } |
| |
| static void fusb300_set_interval(struct fusb300 *fusb300, |
| struct fusb300_ep_info info) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); |
| |
| reg &= ~FUSB300_EPSET1_INTERVAL(0x7); |
| reg |= FUSB300_EPSET1_INTERVAL(info.interval); |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); |
| } |
| |
| static void fusb300_set_bwnum(struct fusb300 *fusb300, |
| struct fusb300_ep_info info) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); |
| |
| reg &= ~FUSB300_EPSET1_BWNUM(0x3); |
| reg |= FUSB300_EPSET1_BWNUM(info.bw_num); |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); |
| } |
| |
| static void set_ep_reg(struct fusb300 *fusb300, |
| struct fusb300_ep_info info) |
| { |
| fusb300_set_eptype(fusb300, info); |
| fusb300_set_epdir(fusb300, info); |
| fusb300_set_epmps(fusb300, info); |
| |
| if (info.interval) |
| fusb300_set_interval(fusb300, info); |
| |
| if (info.bw_num) |
| fusb300_set_bwnum(fusb300, info); |
| |
| fusb300_set_ep_active(fusb300, info.epnum); |
| } |
| |
| static int config_ep(struct fusb300_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct fusb300 *fusb300 = ep->fusb300; |
| struct fusb300_ep_info info; |
| |
| ep->ep.desc = desc; |
| |
| info.interval = 0; |
| info.addrofs = 0; |
| info.bw_num = 0; |
| |
| info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; |
| info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; |
| info.maxpacket = usb_endpoint_maxp(desc); |
| info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| |
| if ((info.type == USB_ENDPOINT_XFER_INT) || |
| (info.type == USB_ENDPOINT_XFER_ISOC)) { |
| info.interval = desc->bInterval; |
| if (info.type == USB_ENDPOINT_XFER_ISOC) |
| info.bw_num = ((desc->wMaxPacketSize & 0x1800) >> 11); |
| } |
| |
| ep_fifo_setting(fusb300, info); |
| |
| set_ep_reg(fusb300, info); |
| |
| fusb300_ep_setting(ep, info); |
| |
| fusb300->ep[info.epnum] = ep; |
| |
| return 0; |
| } |
| |
| static int fusb300_enable(struct usb_ep *_ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct fusb300_ep *ep; |
| |
| ep = container_of(_ep, struct fusb300_ep, ep); |
| |
| if (ep->fusb300->reenum) { |
| ep->fusb300->fifo_entry_num = 0; |
| ep->fusb300->addrofs = 0; |
| ep->fusb300->reenum = 0; |
| } |
| |
| return config_ep(ep, desc); |
| } |
| |
| static int fusb300_disable(struct usb_ep *_ep) |
| { |
| struct fusb300_ep *ep; |
| struct fusb300_request *req; |
| unsigned long flags; |
| |
| ep = container_of(_ep, struct fusb300_ep, ep); |
| |
| BUG_ON(!ep); |
| |
| while (!list_empty(&ep->queue)) { |
| req = list_entry(ep->queue.next, struct fusb300_request, queue); |
| spin_lock_irqsave(&ep->fusb300->lock, flags); |
| done(ep, req, -ECONNRESET); |
| spin_unlock_irqrestore(&ep->fusb300->lock, flags); |
| } |
| |
| return fusb300_ep_release(ep); |
| } |
| |
| static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep, |
| gfp_t gfp_flags) |
| { |
| struct fusb300_request *req; |
| |
| req = kzalloc(sizeof(struct fusb300_request), gfp_flags); |
| if (!req) |
| return NULL; |
| INIT_LIST_HEAD(&req->queue); |
| |
| return &req->req; |
| } |
| |
| static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct fusb300_request *req; |
| |
| req = container_of(_req, struct fusb300_request, req); |
| kfree(req); |
| } |
| |
| static int enable_fifo_int(struct fusb300_ep *ep) |
| { |
| struct fusb300 *fusb300 = ep->fusb300; |
| |
| if (ep->epnum) { |
| fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0, |
| FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); |
| } else { |
| pr_err("can't enable_fifo_int ep0\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int disable_fifo_int(struct fusb300_ep *ep) |
| { |
| struct fusb300 *fusb300 = ep->fusb300; |
| |
| if (ep->epnum) { |
| fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0, |
| FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); |
| } else { |
| pr_err("can't disable_fifo_int ep0\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length) |
| { |
| u32 reg; |
| |
| reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); |
| reg &= ~FUSB300_CSR_LEN_MSK; |
| reg |= FUSB300_CSR_LEN(length); |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR); |
| } |
| |
| /* write data to cx fifo */ |
| static void fusb300_wrcxf(struct fusb300_ep *ep, |
| struct fusb300_request *req) |
| { |
| int i = 0; |
| u8 *tmp; |
| u32 data; |
| struct fusb300 *fusb300 = ep->fusb300; |
| u32 length = req->req.length - req->req.actual; |
| |
| tmp = req->req.buf + req->req.actual; |
| |
| if (length > SS_CTL_MAX_PACKET_SIZE) { |
| fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE); |
| for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) { |
| data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | |
| *(tmp + 3) << 24; |
| iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); |
| tmp += 4; |
| } |
| req->req.actual += SS_CTL_MAX_PACKET_SIZE; |
| } else { /* length is less than max packet size */ |
| fusb300_set_cxlen(fusb300, length); |
| for (i = length >> 2; i > 0; i--) { |
| data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | |
| *(tmp + 3) << 24; |
| printk(KERN_DEBUG " 0x%x\n", data); |
| iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); |
| tmp = tmp + 4; |
| } |
| switch (length % 4) { |
| case 1: |
| data = *tmp; |
| printk(KERN_DEBUG " 0x%x\n", data); |
| iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); |
| break; |
| case 2: |
| data = *tmp | *(tmp + 1) << 8; |
| printk(KERN_DEBUG " 0x%x\n", data); |
| iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); |
| break; |
| case 3: |
| data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; |
| printk(KERN_DEBUG " 0x%x\n", data); |
| iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); |
| break; |
| default: |
| break; |
| } |
| req->req.actual += length; |
| } |
| } |
| |
| static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep) |
| { |
| fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), |
| FUSB300_EPSET0_STL); |
| } |
| |
| static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); |
| |
| if (reg & FUSB300_EPSET0_STL) { |
| printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep); |
| reg &= ~FUSB300_EPSET0_STL; |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); |
| } |
| } |
| |
| static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req) |
| { |
| if (ep->fusb300->ep0_dir) { /* if IN */ |
| if (req->req.length) { |
| fusb300_wrcxf(ep, req); |
| } else |
| printk(KERN_DEBUG "%s : req->req.length = 0x%x\n", |
| __func__, req->req.length); |
| if ((req->req.length == req->req.actual) || |
| (req->req.actual < ep->ep.maxpacket)) |
| done(ep, req, 0); |
| } else { /* OUT */ |
| if (!req->req.length) |
| done(ep, req, 0); |
| else |
| fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1, |
| FUSB300_IGER1_CX_OUT_INT); |
| } |
| } |
| |
| static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req, |
| gfp_t gfp_flags) |
| { |
| struct fusb300_ep *ep; |
| struct fusb300_request *req; |
| unsigned long flags; |
| int request = 0; |
| |
| ep = container_of(_ep, struct fusb300_ep, ep); |
| req = container_of(_req, struct fusb300_request, req); |
| |
| if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) |
| return -ESHUTDOWN; |
| |
| spin_lock_irqsave(&ep->fusb300->lock, flags); |
| |
| if (list_empty(&ep->queue)) |
| request = 1; |
| |
| list_add_tail(&req->queue, &ep->queue); |
| |
| req->req.actual = 0; |
| req->req.status = -EINPROGRESS; |
| |
| if (ep->ep.desc == NULL) /* ep0 */ |
| ep0_queue(ep, req); |
| else if (request && !ep->stall) |
| enable_fifo_int(ep); |
| |
| spin_unlock_irqrestore(&ep->fusb300->lock, flags); |
| |
| return 0; |
| } |
| |
| static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct fusb300_ep *ep; |
| struct fusb300_request *req; |
| unsigned long flags; |
| |
| ep = container_of(_ep, struct fusb300_ep, ep); |
| req = container_of(_req, struct fusb300_request, req); |
| |
| spin_lock_irqsave(&ep->fusb300->lock, flags); |
| if (!list_empty(&ep->queue)) |
| done(ep, req, -ECONNRESET); |
| spin_unlock_irqrestore(&ep->fusb300->lock, flags); |
| |
| return 0; |
| } |
| |
| static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge) |
| { |
| struct fusb300_ep *ep; |
| struct fusb300 *fusb300; |
| unsigned long flags; |
| int ret = 0; |
| |
| ep = container_of(_ep, struct fusb300_ep, ep); |
| |
| fusb300 = ep->fusb300; |
| |
| spin_lock_irqsave(&ep->fusb300->lock, flags); |
| |
| if (!list_empty(&ep->queue)) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| if (value) { |
| fusb300_set_epnstall(fusb300, ep->epnum); |
| ep->stall = 1; |
| if (wedge) |
| ep->wedged = 1; |
| } else { |
| fusb300_clear_epnstall(fusb300, ep->epnum); |
| ep->stall = 0; |
| ep->wedged = 0; |
| } |
| |
| out: |
| spin_unlock_irqrestore(&ep->fusb300->lock, flags); |
| return ret; |
| } |
| |
| static int fusb300_set_halt(struct usb_ep *_ep, int value) |
| { |
| return fusb300_set_halt_and_wedge(_ep, value, 0); |
| } |
| |
| static int fusb300_set_wedge(struct usb_ep *_ep) |
| { |
| return fusb300_set_halt_and_wedge(_ep, 1, 1); |
| } |
| |
| static void fusb300_fifo_flush(struct usb_ep *_ep) |
| { |
| } |
| |
| static struct usb_ep_ops fusb300_ep_ops = { |
| .enable = fusb300_enable, |
| .disable = fusb300_disable, |
| |
| .alloc_request = fusb300_alloc_request, |
| .free_request = fusb300_free_request, |
| |
| .queue = fusb300_queue, |
| .dequeue = fusb300_dequeue, |
| |
| .set_halt = fusb300_set_halt, |
| .fifo_flush = fusb300_fifo_flush, |
| .set_wedge = fusb300_set_wedge, |
| }; |
| |
| /*****************************************************************************/ |
| static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset, |
| u32 value) |
| { |
| iowrite32(value, fusb300->reg + offset); |
| } |
| |
| static void fusb300_reset(void) |
| { |
| } |
| |
| static void fusb300_set_cxstall(struct fusb300 *fusb300) |
| { |
| fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, |
| FUSB300_CSR_STL); |
| } |
| |
| static void fusb300_set_cxdone(struct fusb300 *fusb300) |
| { |
| fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, |
| FUSB300_CSR_DONE); |
| } |
| |
| /* read data from cx fifo */ |
| void fusb300_rdcxf(struct fusb300 *fusb300, |
| u8 *buffer, u32 length) |
| { |
| int i = 0; |
| u8 *tmp; |
| u32 data; |
| |
| tmp = buffer; |
| |
| for (i = (length >> 2); i > 0; i--) { |
| data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); |
| printk(KERN_DEBUG " 0x%x\n", data); |
| *tmp = data & 0xFF; |
| *(tmp + 1) = (data >> 8) & 0xFF; |
| *(tmp + 2) = (data >> 16) & 0xFF; |
| *(tmp + 3) = (data >> 24) & 0xFF; |
| tmp = tmp + 4; |
| } |
| |
| switch (length % 4) { |
| case 1: |
| data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); |
| printk(KERN_DEBUG " 0x%x\n", data); |
| *tmp = data & 0xFF; |
| break; |
| case 2: |
| data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); |
| printk(KERN_DEBUG " 0x%x\n", data); |
| *tmp = data & 0xFF; |
| *(tmp + 1) = (data >> 8) & 0xFF; |
| break; |
| case 3: |
| data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); |
| printk(KERN_DEBUG " 0x%x\n", data); |
| *tmp = data & 0xFF; |
| *(tmp + 1) = (data >> 8) & 0xFF; |
| *(tmp + 2) = (data >> 16) & 0xFF; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void fusb300_rdfifo(struct fusb300_ep *ep, |
| struct fusb300_request *req, |
| u32 length) |
| { |
| int i = 0; |
| u8 *tmp; |
| u32 data, reg; |
| struct fusb300 *fusb300 = ep->fusb300; |
| |
| tmp = req->req.buf + req->req.actual; |
| req->req.actual += length; |
| |
| if (req->req.actual > req->req.length) |
| printk(KERN_DEBUG "req->req.actual > req->req.length\n"); |
| |
| for (i = (length >> 2); i > 0; i--) { |
| data = ioread32(fusb300->reg + |
| FUSB300_OFFSET_EPPORT(ep->epnum)); |
| *tmp = data & 0xFF; |
| *(tmp + 1) = (data >> 8) & 0xFF; |
| *(tmp + 2) = (data >> 16) & 0xFF; |
| *(tmp + 3) = (data >> 24) & 0xFF; |
| tmp = tmp + 4; |
| } |
| |
| switch (length % 4) { |
| case 1: |
| data = ioread32(fusb300->reg + |
| FUSB300_OFFSET_EPPORT(ep->epnum)); |
| *tmp = data & 0xFF; |
| break; |
| case 2: |
| data = ioread32(fusb300->reg + |
| FUSB300_OFFSET_EPPORT(ep->epnum)); |
| *tmp = data & 0xFF; |
| *(tmp + 1) = (data >> 8) & 0xFF; |
| break; |
| case 3: |
| data = ioread32(fusb300->reg + |
| FUSB300_OFFSET_EPPORT(ep->epnum)); |
| *tmp = data & 0xFF; |
| *(tmp + 1) = (data >> 8) & 0xFF; |
| *(tmp + 2) = (data >> 16) & 0xFF; |
| break; |
| default: |
| break; |
| } |
| |
| do { |
| reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); |
| reg &= FUSB300_IGR1_SYNF0_EMPTY_INT; |
| if (i) |
| printk(KERN_INFO "sync fifo is not empty!\n"); |
| i++; |
| } while (!reg); |
| } |
| |
| static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep) |
| { |
| u8 value; |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); |
| |
| value = reg & FUSB300_EPSET0_STL; |
| |
| return value; |
| } |
| |
| static u8 fusb300_get_cxstall(struct fusb300 *fusb300) |
| { |
| u8 value; |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); |
| |
| value = (reg & FUSB300_CSR_STL) >> 1; |
| |
| return value; |
| } |
| |
| static void request_error(struct fusb300 *fusb300) |
| { |
| fusb300_set_cxstall(fusb300); |
| printk(KERN_DEBUG "request error!!\n"); |
| } |
| |
| static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) |
| __releases(fusb300->lock) |
| __acquires(fusb300->lock) |
| { |
| u8 ep; |
| u16 status = 0; |
| u16 w_index = ctrl->wIndex; |
| |
| switch (ctrl->bRequestType & USB_RECIP_MASK) { |
| case USB_RECIP_DEVICE: |
| status = 1 << USB_DEVICE_SELF_POWERED; |
| break; |
| case USB_RECIP_INTERFACE: |
| status = 0; |
| break; |
| case USB_RECIP_ENDPOINT: |
| ep = w_index & USB_ENDPOINT_NUMBER_MASK; |
| if (ep) { |
| if (fusb300_get_epnstall(fusb300, ep)) |
| status = 1 << USB_ENDPOINT_HALT; |
| } else { |
| if (fusb300_get_cxstall(fusb300)) |
| status = 0; |
| } |
| break; |
| |
| default: |
| request_error(fusb300); |
| return; /* exit */ |
| } |
| |
| fusb300->ep0_data = cpu_to_le16(status); |
| fusb300->ep0_req->buf = &fusb300->ep0_data; |
| fusb300->ep0_req->length = 2; |
| |
| spin_unlock(&fusb300->lock); |
| fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL); |
| spin_lock(&fusb300->lock); |
| } |
| |
| static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) |
| { |
| u8 ep; |
| |
| switch (ctrl->bRequestType & USB_RECIP_MASK) { |
| case USB_RECIP_DEVICE: |
| fusb300_set_cxdone(fusb300); |
| break; |
| case USB_RECIP_INTERFACE: |
| fusb300_set_cxdone(fusb300); |
| break; |
| case USB_RECIP_ENDPOINT: { |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| |
| ep = w_index & USB_ENDPOINT_NUMBER_MASK; |
| if (ep) |
| fusb300_set_epnstall(fusb300, ep); |
| else |
| fusb300_set_cxstall(fusb300); |
| fusb300_set_cxdone(fusb300); |
| } |
| break; |
| default: |
| request_error(fusb300); |
| break; |
| } |
| } |
| |
| static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep) |
| { |
| fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), |
| FUSB300_EPSET0_CLRSEQNUM); |
| } |
| |
| static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) |
| { |
| struct fusb300_ep *ep = |
| fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK]; |
| |
| switch (ctrl->bRequestType & USB_RECIP_MASK) { |
| case USB_RECIP_DEVICE: |
| fusb300_set_cxdone(fusb300); |
| break; |
| case USB_RECIP_INTERFACE: |
| fusb300_set_cxdone(fusb300); |
| break; |
| case USB_RECIP_ENDPOINT: |
| if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) { |
| if (ep->wedged) { |
| fusb300_set_cxdone(fusb300); |
| break; |
| } |
| if (ep->stall) { |
| ep->stall = 0; |
| fusb300_clear_seqnum(fusb300, ep->epnum); |
| fusb300_clear_epnstall(fusb300, ep->epnum); |
| if (!list_empty(&ep->queue)) |
| enable_fifo_int(ep); |
| } |
| } |
| fusb300_set_cxdone(fusb300); |
| break; |
| default: |
| request_error(fusb300); |
| break; |
| } |
| } |
| |
| static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR); |
| |
| reg &= ~FUSB300_DAR_DRVADDR_MSK; |
| reg |= FUSB300_DAR_DRVADDR(addr); |
| |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR); |
| } |
| |
| static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) |
| { |
| if (ctrl->wValue >= 0x0100) |
| request_error(fusb300); |
| else { |
| fusb300_set_dev_addr(fusb300, ctrl->wValue); |
| fusb300_set_cxdone(fusb300); |
| } |
| } |
| |
| #define UVC_COPY_DESCRIPTORS(mem, src) \ |
| do { \ |
| const struct usb_descriptor_header * const *__src; \ |
| for (__src = src; *__src; ++__src) { \ |
| memcpy(mem, *__src, (*__src)->bLength); \ |
| mem += (*__src)->bLength; \ |
| } \ |
| } while (0) |
| |
| static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) |
| { |
| u8 *p = (u8 *)ctrl; |
| u8 ret = 0; |
| u8 i = 0; |
| |
| fusb300_rdcxf(fusb300, p, 8); |
| fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN; |
| fusb300->ep0_length = ctrl->wLength; |
| |
| /* check request */ |
| if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { |
| switch (ctrl->bRequest) { |
| case USB_REQ_GET_STATUS: |
| get_status(fusb300, ctrl); |
| break; |
| case USB_REQ_CLEAR_FEATURE: |
| clear_feature(fusb300, ctrl); |
| break; |
| case USB_REQ_SET_FEATURE: |
| set_feature(fusb300, ctrl); |
| break; |
| case USB_REQ_SET_ADDRESS: |
| set_address(fusb300, ctrl); |
| break; |
| case USB_REQ_SET_CONFIGURATION: |
| fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR, |
| FUSB300_DAR_SETCONFG); |
| /* clear sequence number */ |
| for (i = 1; i <= FUSB300_MAX_NUM_EP; i++) |
| fusb300_clear_seqnum(fusb300, i); |
| fusb300->reenum = 1; |
| ret = 1; |
| break; |
| default: |
| ret = 1; |
| break; |
| } |
| } else |
| ret = 1; |
| |
| return ret; |
| } |
| |
| static void done(struct fusb300_ep *ep, struct fusb300_request *req, |
| int status) |
| { |
| list_del_init(&req->queue); |
| |
| /* don't modify queue heads during completion callback */ |
| if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) |
| req->req.status = -ESHUTDOWN; |
| else |
| req->req.status = status; |
| |
| spin_unlock(&ep->fusb300->lock); |
| req->req.complete(&ep->ep, &req->req); |
| spin_lock(&ep->fusb300->lock); |
| |
| if (ep->epnum) { |
| disable_fifo_int(ep); |
| if (!list_empty(&ep->queue)) |
| enable_fifo_int(ep); |
| } else |
| fusb300_set_cxdone(ep->fusb300); |
| } |
| |
| static void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep, dma_addr_t d, |
| u32 len) |
| { |
| u32 value; |
| u32 reg; |
| |
| /* wait SW owner */ |
| do { |
| reg = ioread32(ep->fusb300->reg + |
| FUSB300_OFFSET_EPPRD_W0(ep->epnum)); |
| reg &= FUSB300_EPPRD0_H; |
| } while (reg); |
| |
| iowrite32(d, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W1(ep->epnum)); |
| |
| value = FUSB300_EPPRD0_BTC(len) | FUSB300_EPPRD0_H | |
| FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I; |
| iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum)); |
| |
| iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum)); |
| |
| fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY, |
| FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum)); |
| } |
| |
| static void fusb300_wait_idma_finished(struct fusb300_ep *ep) |
| { |
| u32 reg; |
| |
| do { |
| reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1); |
| if ((reg & FUSB300_IGR1_VBUS_CHG_INT) || |
| (reg & FUSB300_IGR1_WARM_RST_INT) || |
| (reg & FUSB300_IGR1_HOT_RST_INT) || |
| (reg & FUSB300_IGR1_USBRST_INT) |
| ) |
| goto IDMA_RESET; |
| reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0); |
| reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum); |
| } while (!reg); |
| |
| fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0, |
| FUSB300_IGR0_EPn_PRD_INT(ep->epnum)); |
| IDMA_RESET: |
| fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0, |
| FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); |
| } |
| |
| static void fusb300_set_idma(struct fusb300_ep *ep, |
| struct fusb300_request *req) |
| { |
| dma_addr_t d; |
| |
| d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE); |
| |
| if (dma_mapping_error(NULL, d)) { |
| printk(KERN_DEBUG "dma_mapping_error\n"); |
| return; |
| } |
| |
| dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE); |
| |
| fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0, |
| FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); |
| |
| fusb300_fill_idma_prdtbl(ep, d, req->req.length); |
| /* check idma is done */ |
| fusb300_wait_idma_finished(ep); |
| |
| dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE); |
| } |
| |
| static void in_ep_fifo_handler(struct fusb300_ep *ep) |
| { |
| struct fusb300_request *req = list_entry(ep->queue.next, |
| struct fusb300_request, queue); |
| |
| if (req->req.length) |
| fusb300_set_idma(ep, req); |
| done(ep, req, 0); |
| } |
| |
| static void out_ep_fifo_handler(struct fusb300_ep *ep) |
| { |
| struct fusb300 *fusb300 = ep->fusb300; |
| struct fusb300_request *req = list_entry(ep->queue.next, |
| struct fusb300_request, queue); |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum)); |
| u32 length = reg & FUSB300_FFR_BYCNT; |
| |
| fusb300_rdfifo(ep, req, length); |
| |
| /* finish out transfer */ |
| if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket)) |
| done(ep, req, 0); |
| } |
| |
| static void check_device_mode(struct fusb300 *fusb300) |
| { |
| u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR); |
| |
| switch (reg & FUSB300_GCR_DEVEN_MSK) { |
| case FUSB300_GCR_DEVEN_SS: |
| fusb300->gadget.speed = USB_SPEED_SUPER; |
| break; |
| case FUSB300_GCR_DEVEN_HS: |
| fusb300->gadget.speed = USB_SPEED_HIGH; |
| break; |
| case FUSB300_GCR_DEVEN_FS: |
| fusb300->gadget.speed = USB_SPEED_FULL; |
| break; |
| default: |
| fusb300->gadget.speed = USB_SPEED_UNKNOWN; |
| break; |
| } |
| printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK)); |
| } |
| |
| |
| static void fusb300_ep0out(struct fusb300 *fusb300) |
| { |
| struct fusb300_ep *ep = fusb300->ep[0]; |
| u32 reg; |
| |
| if (!list_empty(&ep->queue)) { |
| struct fusb300_request *req; |
| |
| req = list_first_entry(&ep->queue, |
| struct fusb300_request, queue); |
| if (req->req.length) |
| fusb300_rdcxf(ep->fusb300, req->req.buf, |
| req->req.length); |
| done(ep, req, 0); |
| reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); |
| reg &= ~FUSB300_IGER1_CX_OUT_INT; |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1); |
| } else |
| pr_err("%s : empty queue\n", __func__); |
| } |
| |
| static void fusb300_ep0in(struct fusb300 *fusb300) |
| { |
| struct fusb300_request *req; |
| struct fusb300_ep *ep = fusb300->ep[0]; |
| |
| if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) { |
| req = list_entry(ep->queue.next, |
| struct fusb300_request, queue); |
| if (req->req.length) |
| fusb300_wrcxf(ep, req); |
| if ((req->req.length - req->req.actual) < ep->ep.maxpacket) |
| done(ep, req, 0); |
| } else |
| fusb300_set_cxdone(fusb300); |
| } |
| |
| static void fusb300_grp2_handler(void) |
| { |
| } |
| |
| static void fusb300_grp3_handler(void) |
| { |
| } |
| |
| static void fusb300_grp4_handler(void) |
| { |
| } |
| |
| static void fusb300_grp5_handler(void) |
| { |
| } |
| |
| static irqreturn_t fusb300_irq(int irq, void *_fusb300) |
| { |
| struct fusb300 *fusb300 = _fusb300; |
| u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); |
| u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); |
| u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0); |
| u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0); |
| struct usb_ctrlrequest ctrl; |
| u8 in; |
| u32 reg; |
| int i; |
| |
| spin_lock(&fusb300->lock); |
| |
| int_grp1 &= int_grp1_en; |
| int_grp0 &= int_grp0_en; |
| |
| if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_WARM_RST_INT); |
| printk(KERN_INFO"fusb300_warmreset\n"); |
| fusb300_reset(); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_HOT_RST_INT); |
| printk(KERN_INFO"fusb300_hotreset\n"); |
| fusb300_reset(); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_USBRST_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_USBRST_INT); |
| fusb300_reset(); |
| } |
| /* COMABT_INT has a highest priority */ |
| |
| if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_CX_COMABT_INT); |
| printk(KERN_INFO"fusb300_ep0abt\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_VBUS_CHG_INT); |
| printk(KERN_INFO"fusb300_vbus_change\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U3_EXIT_FAIL_INT); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U2_EXIT_FAIL_INT); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U1_EXIT_FAIL_INT); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U2_ENTRY_FAIL_INT); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U1_ENTRY_FAIL_INT); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U3_EXIT_INT); |
| printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U2_EXIT_INT); |
| printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U1_EXIT_INT); |
| printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U3_ENTRY_INT); |
| printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n"); |
| fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1, |
| FUSB300_SSCR1_GO_U3_DONE); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U2_ENTRY_INT); |
| printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_U1_ENTRY_INT); |
| printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_RESM_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_RESM_INT); |
| printk(KERN_INFO "fusb300_resume\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_SUSP_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_SUSP_INT); |
| printk(KERN_INFO "fusb300_suspend\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_HS_LPM_INT); |
| printk(KERN_INFO "fusb300_HS_LPM_INT\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) { |
| fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, |
| FUSB300_IGR1_DEV_MODE_CHG_INT); |
| check_device_mode(fusb300); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) { |
| fusb300_set_cxstall(fusb300); |
| printk(KERN_INFO "fusb300_ep0fail\n"); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) { |
| printk(KERN_INFO "fusb300_ep0setup\n"); |
| if (setup_packet(fusb300, &ctrl)) { |
| spin_unlock(&fusb300->lock); |
| if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0) |
| fusb300_set_cxstall(fusb300); |
| spin_lock(&fusb300->lock); |
| } |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT) |
| printk(KERN_INFO "fusb300_cmdend\n"); |
| |
| |
| if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) { |
| printk(KERN_INFO "fusb300_cxout\n"); |
| fusb300_ep0out(fusb300); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_CX_IN_INT) { |
| printk(KERN_INFO "fusb300_cxin\n"); |
| fusb300_ep0in(fusb300); |
| } |
| |
| if (int_grp1 & FUSB300_IGR1_INTGRP5) |
| fusb300_grp5_handler(); |
| |
| if (int_grp1 & FUSB300_IGR1_INTGRP4) |
| fusb300_grp4_handler(); |
| |
| if (int_grp1 & FUSB300_IGR1_INTGRP3) |
| fusb300_grp3_handler(); |
| |
| if (int_grp1 & FUSB300_IGR1_INTGRP2) |
| fusb300_grp2_handler(); |
| |
| if (int_grp0) { |
| for (i = 1; i < FUSB300_MAX_NUM_EP; i++) { |
| if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) { |
| reg = ioread32(fusb300->reg + |
| FUSB300_OFFSET_EPSET1(i)); |
| in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0; |
| if (in) |
| in_ep_fifo_handler(fusb300->ep[i]); |
| else |
| out_ep_fifo_handler(fusb300->ep[i]); |
| } |
| } |
| } |
| |
| spin_unlock(&fusb300->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void fusb300_set_u2_timeout(struct fusb300 *fusb300, |
| u32 time) |
| { |
| u32 reg; |
| |
| reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); |
| reg &= ~0xff; |
| reg |= FUSB300_SSCR2_U2TIMEOUT(time); |
| |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); |
| } |
| |
| static void fusb300_set_u1_timeout(struct fusb300 *fusb300, |
| u32 time) |
| { |
| u32 reg; |
| |
| reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); |
| reg &= ~(0xff << 8); |
| reg |= FUSB300_SSCR2_U1TIMEOUT(time); |
| |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); |
| } |
| |
| static void init_controller(struct fusb300 *fusb300) |
| { |
| u32 reg; |
| u32 mask = 0; |
| u32 val = 0; |
| |
| /* split on */ |
| mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON; |
| reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR); |
| reg &= ~mask; |
| reg |= val; |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR); |
| |
| /* enable high-speed LPM */ |
| mask = val = FUSB300_HSCR_HS_LPM_PERMIT; |
| reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR); |
| reg &= ~mask; |
| reg |= val; |
| iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR); |
| |
| /*set u1 u2 timmer*/ |
| fusb300_set_u2_timeout(fusb300, 0xff); |
| fusb300_set_u1_timeout(fusb300, 0xff); |
| |
| /* enable all grp1 interrupt */ |
| iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1); |
| } |
| /*------------------------------------------------------------------------*/ |
| static int fusb300_udc_start(struct usb_gadget *g, |
| struct usb_gadget_driver *driver) |
| { |
| struct fusb300 *fusb300 = to_fusb300(g); |
| |
| /* hook up the driver */ |
| driver->driver.bus = NULL; |
| fusb300->driver = driver; |
| fusb300->gadget.dev.driver = &driver->driver; |
| |
| return 0; |
| } |
| |
| static int fusb300_udc_stop(struct usb_gadget *g, |
| struct usb_gadget_driver *driver) |
| { |
| struct fusb300 *fusb300 = to_fusb300(g); |
| |
| driver->unbind(&fusb300->gadget); |
| fusb300->gadget.dev.driver = NULL; |
| |
| init_controller(fusb300); |
| fusb300->driver = NULL; |
| |
| return 0; |
| } |
| /*--------------------------------------------------------------------------*/ |
| |
| static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active) |
| { |
| return 0; |
| } |
| |
| static const struct usb_gadget_ops fusb300_gadget_ops = { |
| .pullup = fusb300_udc_pullup, |
| .udc_start = fusb300_udc_start, |
| .udc_stop = fusb300_udc_stop, |
| }; |
| |
| static int __exit fusb300_remove(struct platform_device *pdev) |
| { |
| struct fusb300 *fusb300 = dev_get_drvdata(&pdev->dev); |
| |
| usb_del_gadget_udc(&fusb300->gadget); |
| iounmap(fusb300->reg); |
| free_irq(platform_get_irq(pdev, 0), fusb300); |
| |
| fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); |
| kfree(fusb300); |
| |
| return 0; |
| } |
| |
| static int __init fusb300_probe(struct platform_device *pdev) |
| { |
| struct resource *res, *ires, *ires1; |
| void __iomem *reg = NULL; |
| struct fusb300 *fusb300 = NULL; |
| struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP]; |
| int ret = 0; |
| int i; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| ret = -ENODEV; |
| pr_err("platform_get_resource error.\n"); |
| goto clean_up; |
| } |
| |
| ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!ires) { |
| ret = -ENODEV; |
| dev_err(&pdev->dev, |
| "platform_get_resource IORESOURCE_IRQ error.\n"); |
| goto clean_up; |
| } |
| |
| ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); |
| if (!ires1) { |
| ret = -ENODEV; |
| dev_err(&pdev->dev, |
| "platform_get_resource IORESOURCE_IRQ 1 error.\n"); |
| goto clean_up; |
| } |
| |
| reg = ioremap(res->start, resource_size(res)); |
| if (reg == NULL) { |
| ret = -ENOMEM; |
| pr_err("ioremap error.\n"); |
| goto clean_up; |
| } |
| |
| /* initialize udc */ |
| fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL); |
| if (fusb300 == NULL) { |
| pr_err("kzalloc error\n"); |
| goto clean_up; |
| } |
| |
| for (i = 0; i < FUSB300_MAX_NUM_EP; i++) { |
| _ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL); |
| if (_ep[i] == NULL) { |
| pr_err("_ep kzalloc error\n"); |
| goto clean_up; |
| } |
| fusb300->ep[i] = _ep[i]; |
| } |
| |
| spin_lock_init(&fusb300->lock); |
| |
| dev_set_drvdata(&pdev->dev, fusb300); |
| |
| fusb300->gadget.ops = &fusb300_gadget_ops; |
| |
| device_initialize(&fusb300->gadget.dev); |
| |
| dev_set_name(&fusb300->gadget.dev, "gadget"); |
| |
| fusb300->gadget.max_speed = USB_SPEED_HIGH; |
| fusb300->gadget.dev.parent = &pdev->dev; |
| fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask; |
| fusb300->gadget.dev.release = pdev->dev.release; |
| fusb300->gadget.name = udc_name; |
| fusb300->reg = reg; |
| |
| ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED, |
| udc_name, fusb300); |
| if (ret < 0) { |
| pr_err("request_irq error (%d)\n", ret); |
| goto clean_up; |
| } |
| |
| ret = request_irq(ires1->start, fusb300_irq, |
| IRQF_SHARED, udc_name, fusb300); |
| if (ret < 0) { |
| pr_err("request_irq1 error (%d)\n", ret); |
| goto clean_up; |
| } |
| |
| INIT_LIST_HEAD(&fusb300->gadget.ep_list); |
| |
| for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) { |
| struct fusb300_ep *ep = fusb300->ep[i]; |
| |
| if (i != 0) { |
| INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list); |
| list_add_tail(&fusb300->ep[i]->ep.ep_list, |
| &fusb300->gadget.ep_list); |
| } |
| ep->fusb300 = fusb300; |
| INIT_LIST_HEAD(&ep->queue); |
| ep->ep.name = fusb300_ep_name[i]; |
| ep->ep.ops = &fusb300_ep_ops; |
| ep->ep.maxpacket = HS_BULK_MAX_PACKET_SIZE; |
| } |
| fusb300->ep[0]->ep.maxpacket = HS_CTL_MAX_PACKET_SIZE; |
| fusb300->ep[0]->epnum = 0; |
| fusb300->gadget.ep0 = &fusb300->ep[0]->ep; |
| INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list); |
| |
| fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, |
| GFP_KERNEL); |
| if (fusb300->ep0_req == NULL) |
| goto clean_up3; |
| |
| init_controller(fusb300); |
| ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget); |
| if (ret) |
| goto err_add_udc; |
| |
| ret = device_add(&fusb300->gadget.dev); |
| if (ret) { |
| pr_err("device_add error (%d)\n", ret); |
| goto err_add_device; |
| } |
| |
| dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); |
| |
| return 0; |
| |
| err_add_device: |
| usb_del_gadget_udc(&fusb300->gadget); |
| |
| err_add_udc: |
| fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); |
| |
| clean_up3: |
| free_irq(ires->start, fusb300); |
| |
| clean_up: |
| if (fusb300) { |
| if (fusb300->ep0_req) |
| fusb300_free_request(&fusb300->ep[0]->ep, |
| fusb300->ep0_req); |
| kfree(fusb300); |
| } |
| if (reg) |
| iounmap(reg); |
| |
| return ret; |
| } |
| |
| static struct platform_driver fusb300_driver = { |
| .remove = __exit_p(fusb300_remove), |
| .driver = { |
| .name = (char *) udc_name, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver_probe(fusb300_driver, fusb300_probe); |