| /* Low-level parallel port routines for the Atari builtin port |
| * |
| * Author: Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| * |
| * Based on parport_amiga.c. |
| * |
| * The built-in Atari parallel port provides one port at a fixed address |
| * with 8 output data lines (D0 - D7), 1 output control line (STROBE) |
| * and 1 input status line (BUSY) able to cause an interrupt. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/parport.h> |
| #include <linux/interrupt.h> |
| #include <asm/setup.h> |
| #include <asm/atarihw.h> |
| #include <asm/irq.h> |
| #include <asm/atariints.h> |
| |
| static struct parport *this_port = NULL; |
| |
| static unsigned char |
| parport_atari_read_data(struct parport *p) |
| { |
| unsigned long flags; |
| unsigned char data; |
| |
| local_irq_save(flags); |
| sound_ym.rd_data_reg_sel = 15; |
| data = sound_ym.rd_data_reg_sel; |
| local_irq_restore(flags); |
| return data; |
| } |
| |
| static void |
| parport_atari_write_data(struct parport *p, unsigned char data) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| sound_ym.rd_data_reg_sel = 15; |
| sound_ym.wd_data = data; |
| local_irq_restore(flags); |
| } |
| |
| static unsigned char |
| parport_atari_read_control(struct parport *p) |
| { |
| unsigned long flags; |
| unsigned char control = 0; |
| |
| local_irq_save(flags); |
| sound_ym.rd_data_reg_sel = 14; |
| if (!(sound_ym.rd_data_reg_sel & (1 << 5))) |
| control = PARPORT_CONTROL_STROBE; |
| local_irq_restore(flags); |
| return control; |
| } |
| |
| static void |
| parport_atari_write_control(struct parport *p, unsigned char control) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| sound_ym.rd_data_reg_sel = 14; |
| if (control & PARPORT_CONTROL_STROBE) |
| sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~(1 << 5); |
| else |
| sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5); |
| local_irq_restore(flags); |
| } |
| |
| static unsigned char |
| parport_atari_frob_control(struct parport *p, unsigned char mask, |
| unsigned char val) |
| { |
| unsigned char old = parport_atari_read_control(p); |
| parport_atari_write_control(p, (old & ~mask) ^ val); |
| return old; |
| } |
| |
| static unsigned char |
| parport_atari_read_status(struct parport *p) |
| { |
| return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) | |
| PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR); |
| } |
| |
| static void |
| parport_atari_init_state(struct pardevice *d, struct parport_state *s) |
| { |
| } |
| |
| static void |
| parport_atari_save_state(struct parport *p, struct parport_state *s) |
| { |
| } |
| |
| static void |
| parport_atari_restore_state(struct parport *p, struct parport_state *s) |
| { |
| } |
| |
| static void |
| parport_atari_enable_irq(struct parport *p) |
| { |
| enable_irq(IRQ_MFP_BUSY); |
| } |
| |
| static void |
| parport_atari_disable_irq(struct parport *p) |
| { |
| disable_irq(IRQ_MFP_BUSY); |
| } |
| |
| static void |
| parport_atari_data_forward(struct parport *p) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| /* Soundchip port B as output. */ |
| sound_ym.rd_data_reg_sel = 7; |
| sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x40; |
| local_irq_restore(flags); |
| } |
| |
| static void |
| parport_atari_data_reverse(struct parport *p) |
| { |
| #if 0 /* too dangerous, can kill sound chip */ |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| /* Soundchip port B as input. */ |
| sound_ym.rd_data_reg_sel = 7; |
| sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~0x40; |
| local_irq_restore(flags); |
| #endif |
| } |
| |
| static struct parport_operations parport_atari_ops = { |
| .write_data = parport_atari_write_data, |
| .read_data = parport_atari_read_data, |
| |
| .write_control = parport_atari_write_control, |
| .read_control = parport_atari_read_control, |
| .frob_control = parport_atari_frob_control, |
| |
| .read_status = parport_atari_read_status, |
| |
| .enable_irq = parport_atari_enable_irq, |
| .disable_irq = parport_atari_disable_irq, |
| |
| .data_forward = parport_atari_data_forward, |
| .data_reverse = parport_atari_data_reverse, |
| |
| .init_state = parport_atari_init_state, |
| .save_state = parport_atari_save_state, |
| .restore_state = parport_atari_restore_state, |
| |
| .epp_write_data = parport_ieee1284_epp_write_data, |
| .epp_read_data = parport_ieee1284_epp_read_data, |
| .epp_write_addr = parport_ieee1284_epp_write_addr, |
| .epp_read_addr = parport_ieee1284_epp_read_addr, |
| |
| .ecp_write_data = parport_ieee1284_ecp_write_data, |
| .ecp_read_data = parport_ieee1284_ecp_read_data, |
| .ecp_write_addr = parport_ieee1284_ecp_write_addr, |
| |
| .compat_write_data = parport_ieee1284_write_compat, |
| .nibble_read_data = parport_ieee1284_read_nibble, |
| .byte_read_data = parport_ieee1284_read_byte, |
| |
| .owner = THIS_MODULE, |
| }; |
| |
| |
| static int __init parport_atari_init(void) |
| { |
| struct parport *p; |
| unsigned long flags; |
| |
| if (MACH_IS_ATARI) { |
| local_irq_save(flags); |
| /* Soundchip port A/B as output. */ |
| sound_ym.rd_data_reg_sel = 7; |
| sound_ym.wd_data = (sound_ym.rd_data_reg_sel & 0x3f) | 0xc0; |
| /* STROBE high. */ |
| sound_ym.rd_data_reg_sel = 14; |
| sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5); |
| local_irq_restore(flags); |
| /* MFP port I0 as input. */ |
| mfp.data_dir &= ~1; |
| /* MFP port I0 interrupt on high->low edge. */ |
| mfp.active_edge &= ~1; |
| p = parport_register_port((unsigned long)&sound_ym.wd_data, |
| IRQ_MFP_BUSY, PARPORT_DMA_NONE, |
| &parport_atari_ops); |
| if (!p) |
| return -ENODEV; |
| if (request_irq(IRQ_MFP_BUSY, parport_irq_handler, |
| IRQ_TYPE_SLOW, p->name, p)) { |
| parport_put_port (p); |
| return -ENODEV; |
| } |
| |
| this_port = p; |
| printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name); |
| parport_announce_port (p); |
| |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| static void __exit parport_atari_exit(void) |
| { |
| parport_remove_port(this_port); |
| if (this_port->irq != PARPORT_IRQ_NONE) |
| free_irq(IRQ_MFP_BUSY, this_port); |
| parport_put_port(this_port); |
| } |
| |
| MODULE_AUTHOR("Andreas Schwab"); |
| MODULE_DESCRIPTION("Parport Driver for Atari builtin Port"); |
| MODULE_SUPPORTED_DEVICE("Atari builtin Parallel Port"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(parport_atari_init) |
| module_exit(parport_atari_exit) |