| /* |
| * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com> |
| * |
| * The LM95241 is a sensor chip made by National Semiconductors. |
| * It reports up to three temperatures (its own plus up to two external ones). |
| * Complete datasheet can be obtained from National's website at: |
| * http://www.national.com/ds.cgi/LM/LM95241.pdf |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| |
| #define DEVNAME "lm95241" |
| |
| static const unsigned short normal_i2c[] = { |
| 0x19, 0x2a, 0x2b, I2C_CLIENT_END }; |
| |
| /* LM95241 registers */ |
| #define LM95241_REG_R_MAN_ID 0xFE |
| #define LM95241_REG_R_CHIP_ID 0xFF |
| #define LM95241_REG_R_STATUS 0x02 |
| #define LM95241_REG_RW_CONFIG 0x03 |
| #define LM95241_REG_RW_REM_FILTER 0x06 |
| #define LM95241_REG_RW_TRUTHERM 0x07 |
| #define LM95241_REG_W_ONE_SHOT 0x0F |
| #define LM95241_REG_R_LOCAL_TEMPH 0x10 |
| #define LM95241_REG_R_REMOTE1_TEMPH 0x11 |
| #define LM95241_REG_R_REMOTE2_TEMPH 0x12 |
| #define LM95241_REG_R_LOCAL_TEMPL 0x20 |
| #define LM95241_REG_R_REMOTE1_TEMPL 0x21 |
| #define LM95241_REG_R_REMOTE2_TEMPL 0x22 |
| #define LM95241_REG_RW_REMOTE_MODEL 0x30 |
| |
| /* LM95241 specific bitfields */ |
| #define CFG_STOP 0x40 |
| #define CFG_CR0076 0x00 |
| #define CFG_CR0182 0x10 |
| #define CFG_CR1000 0x20 |
| #define CFG_CR2700 0x30 |
| #define R1MS_SHIFT 0 |
| #define R2MS_SHIFT 2 |
| #define R1MS_MASK (0x01 << (R1MS_SHIFT)) |
| #define R2MS_MASK (0x01 << (R2MS_SHIFT)) |
| #define R1DF_SHIFT 1 |
| #define R2DF_SHIFT 2 |
| #define R1DF_MASK (0x01 << (R1DF_SHIFT)) |
| #define R2DF_MASK (0x01 << (R2DF_SHIFT)) |
| #define R1FE_MASK 0x01 |
| #define R2FE_MASK 0x05 |
| #define TT1_SHIFT 0 |
| #define TT2_SHIFT 4 |
| #define TT_OFF 0 |
| #define TT_ON 1 |
| #define TT_MASK 7 |
| #define NATSEMI_MAN_ID 0x01 |
| #define LM95231_CHIP_ID 0xA1 |
| #define LM95241_CHIP_ID 0xA4 |
| |
| static const u8 lm95241_reg_address[] = { |
| LM95241_REG_R_LOCAL_TEMPH, |
| LM95241_REG_R_LOCAL_TEMPL, |
| LM95241_REG_R_REMOTE1_TEMPH, |
| LM95241_REG_R_REMOTE1_TEMPL, |
| LM95241_REG_R_REMOTE2_TEMPH, |
| LM95241_REG_R_REMOTE2_TEMPL |
| }; |
| |
| /* Client data (each client gets its own) */ |
| struct lm95241_data { |
| struct device *hwmon_dev; |
| struct mutex update_lock; |
| unsigned long last_updated, interval; /* in jiffies */ |
| char valid; /* zero until following fields are valid */ |
| /* registers values */ |
| u8 temp[ARRAY_SIZE(lm95241_reg_address)]; |
| u8 config, model, trutherm; |
| }; |
| |
| /* Conversions */ |
| static int temp_from_reg_signed(u8 val_h, u8 val_l) |
| { |
| s16 val_hl = (val_h << 8) | val_l; |
| return val_hl * 1000 / 256; |
| } |
| |
| static int temp_from_reg_unsigned(u8 val_h, u8 val_l) |
| { |
| u16 val_hl = (val_h << 8) | val_l; |
| return val_hl * 1000 / 256; |
| } |
| |
| static struct lm95241_data *lm95241_update_device(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + data->interval) || |
| !data->valid) { |
| int i; |
| |
| dev_dbg(&client->dev, "Updating lm95241 data.\n"); |
| for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++) |
| data->temp[i] |
| = i2c_smbus_read_byte_data(client, |
| lm95241_reg_address[i]); |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| /* Sysfs stuff */ |
| static ssize_t show_input(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95241_data *data = lm95241_update_device(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| |
| return snprintf(buf, PAGE_SIZE - 1, "%d\n", |
| index == 0 || (data->config & (1 << (index / 2))) ? |
| temp_from_reg_signed(data->temp[index], data->temp[index + 1]) : |
| temp_from_reg_unsigned(data->temp[index], |
| data->temp[index + 1])); |
| } |
| |
| static ssize_t show_type(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| |
| return snprintf(buf, PAGE_SIZE - 1, |
| data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n"); |
| } |
| |
| static ssize_t set_type(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| unsigned long val; |
| int shift; |
| u8 mask = to_sensor_dev_attr(attr)->index; |
| |
| if (kstrtoul(buf, 10, &val) < 0) |
| return -EINVAL; |
| if (val != 1 && val != 2) |
| return -EINVAL; |
| |
| shift = mask == R1MS_MASK ? TT1_SHIFT : TT2_SHIFT; |
| |
| mutex_lock(&data->update_lock); |
| |
| data->trutherm &= ~(TT_MASK << shift); |
| if (val == 1) { |
| data->model |= mask; |
| data->trutherm |= (TT_ON << shift); |
| } else { |
| data->model &= ~mask; |
| data->trutherm |= (TT_OFF << shift); |
| } |
| data->valid = 0; |
| |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, |
| data->model); |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, |
| data->trutherm); |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_min(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| |
| return snprintf(buf, PAGE_SIZE - 1, |
| data->config & to_sensor_dev_attr(attr)->index ? |
| "-127000\n" : "0\n"); |
| } |
| |
| static ssize_t set_min(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| long val; |
| |
| if (kstrtol(buf, 10, &val) < 0) |
| return -EINVAL; |
| if (val < -128000) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (val < 0) |
| data->config |= to_sensor_dev_attr(attr)->index; |
| else |
| data->config &= ~to_sensor_dev_attr(attr)->index; |
| data->valid = 0; |
| |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_max(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| |
| return snprintf(buf, PAGE_SIZE - 1, |
| data->config & to_sensor_dev_attr(attr)->index ? |
| "127000\n" : "255000\n"); |
| } |
| |
| static ssize_t set_max(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| long val; |
| |
| if (kstrtol(buf, 10, &val) < 0) |
| return -EINVAL; |
| if (val >= 256000) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (val <= 127000) |
| data->config |= to_sensor_dev_attr(attr)->index; |
| else |
| data->config &= ~to_sensor_dev_attr(attr)->index; |
| data->valid = 0; |
| |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_interval(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95241_data *data = lm95241_update_device(dev); |
| |
| return snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval |
| / HZ); |
| } |
| |
| static ssize_t set_interval(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| unsigned long val; |
| |
| if (kstrtoul(buf, 10, &val) < 0) |
| return -EINVAL; |
| |
| data->interval = val * HZ / 1000; |
| |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 4); |
| static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type, |
| R1MS_MASK); |
| static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type, |
| R2MS_MASK); |
| static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min, |
| R1DF_MASK); |
| static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min, |
| R2DF_MASK); |
| static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max, |
| R1DF_MASK); |
| static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, |
| R2DF_MASK); |
| static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, |
| set_interval); |
| |
| static struct attribute *lm95241_attributes[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_type.dev_attr.attr, |
| &sensor_dev_attr_temp3_type.dev_attr.attr, |
| &sensor_dev_attr_temp2_min.dev_attr.attr, |
| &sensor_dev_attr_temp3_min.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp3_max.dev_attr.attr, |
| &dev_attr_update_interval.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group lm95241_group = { |
| .attrs = lm95241_attributes, |
| }; |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int lm95241_detect(struct i2c_client *new_client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = new_client->adapter; |
| const char *name; |
| int mfg_id, chip_id; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| mfg_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID); |
| if (mfg_id != NATSEMI_MAN_ID) |
| return -ENODEV; |
| |
| chip_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID); |
| switch (chip_id) { |
| case LM95231_CHIP_ID: |
| name = "lm95231"; |
| break; |
| case LM95241_CHIP_ID: |
| name = "lm95241"; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| /* Fill the i2c board info */ |
| strlcpy(info->type, name, I2C_NAME_SIZE); |
| return 0; |
| } |
| |
| static void lm95241_init_client(struct i2c_client *client) |
| { |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| |
| data->interval = HZ; /* 1 sec default */ |
| data->valid = 0; |
| data->config = CFG_CR0076; |
| data->model = 0; |
| data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT); |
| |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER, |
| R1FE_MASK | R2FE_MASK); |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, |
| data->trutherm); |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, |
| data->model); |
| } |
| |
| static int lm95241_probe(struct i2c_client *new_client, |
| const struct i2c_device_id *id) |
| { |
| struct lm95241_data *data; |
| int err; |
| |
| data = devm_kzalloc(&new_client->dev, sizeof(struct lm95241_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(new_client, data); |
| mutex_init(&data->update_lock); |
| |
| /* Initialize the LM95241 chip */ |
| lm95241_init_client(new_client); |
| |
| /* Register sysfs hooks */ |
| err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group); |
| if (err) |
| return err; |
| |
| data->hwmon_dev = hwmon_device_register(&new_client->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| goto exit_remove_files; |
| } |
| |
| return 0; |
| |
| exit_remove_files: |
| sysfs_remove_group(&new_client->dev.kobj, &lm95241_group); |
| return err; |
| } |
| |
| static int lm95241_remove(struct i2c_client *client) |
| { |
| struct lm95241_data *data = i2c_get_clientdata(client); |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| sysfs_remove_group(&client->dev.kobj, &lm95241_group); |
| |
| return 0; |
| } |
| |
| /* Driver data (common to all clients) */ |
| static const struct i2c_device_id lm95241_id[] = { |
| { "lm95231", 0 }, |
| { "lm95241", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lm95241_id); |
| |
| static struct i2c_driver lm95241_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = DEVNAME, |
| }, |
| .probe = lm95241_probe, |
| .remove = lm95241_remove, |
| .id_table = lm95241_id, |
| .detect = lm95241_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(lm95241_driver); |
| |
| MODULE_AUTHOR("Davide Rizzo <elpa.rizzo@gmail.com>"); |
| MODULE_DESCRIPTION("LM95241 sensor driver"); |
| MODULE_LICENSE("GPL"); |