| /**************************************************************************** |
| * Perceptive Solutions, Inc. PCI-2220I device driver for Linux. |
| * |
| * psi_dalei.h - Linux Host Driver for PCI-2220i EIDE Adapters |
| * |
| * Copyright (c) 1997-1999 Perceptive Solutions, Inc. |
| * All Rights Reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that redistributions of source |
| * code retain the above copyright notice and this comment without |
| * modification. |
| * |
| * Technical updates and product information at: |
| * http://www.psidisk.com |
| * |
| * Please send questions, comments, bug reports to: |
| * tech@psidisk.com Technical Support |
| * |
| ****************************************************************************/ |
| |
| /************************************************/ |
| /* Some defines that we like */ |
| /************************************************/ |
| #define CHAR char |
| #define UCHAR unsigned char |
| #define SHORT short |
| #define USHORT unsigned short |
| #define BOOL unsigned short |
| #define LONG long |
| #define ULONG unsigned long |
| #define VOID void |
| |
| /************************************************/ |
| /* Dale PCI setup */ |
| /************************************************/ |
| #define VENDOR_PSI 0x1256 |
| #define DEVICE_DALE_1 0x4401 /* 'D1' */ |
| #define DEVICE_BIGD_1 0x4201 /* 'B1' */ |
| #define DEVICE_BIGD_2 0x4202 /* 'B2' */ |
| |
| /************************************************/ |
| /* Misc konstants */ |
| /************************************************/ |
| #define DALE_MAXDRIVES 4 |
| #define BIGD_MAXDRIVES 8 |
| #define SECTORSXFER 8 |
| #define ATAPI_TRANSFER 8192 |
| #define BYTES_PER_SECTOR 512 |
| #define DEFAULT_TIMING_MODE 5 |
| |
| /************************************************/ |
| /* EEPROM locations */ |
| /************************************************/ |
| #define DALE_FLASH_PAGE_SIZE 128 // number of bytes per page |
| #define DALE_FLASH_SIZE 65536L |
| |
| #define DALE_FLASH_BIOS 0x00080000L // BIOS base address |
| #define DALE_FLASH_SETUP 0x00088000L // SETUP PROGRAM base address offset from BIOS |
| #define DALE_FLASH_RAID 0x00088400L // RAID signature storage |
| #define DALE_FLASH_FACTORY 0x00089000L // FACTORY data base address offset from BIOS |
| |
| #define DALE_FLASH_BIOS_SIZE 32768U // size of FLASH BIOS REGION |
| |
| /************************************************/ |
| /* DALE Register address offsets */ |
| /************************************************/ |
| #define REG_DATA 0x80 |
| #define REG_ERROR 0x84 |
| #define REG_SECTOR_COUNT 0x88 |
| #define REG_LBA_0 0x8C |
| #define REG_LBA_8 0x90 |
| #define REG_LBA_16 0x94 |
| #define REG_LBA_24 0x98 |
| #define REG_STAT_CMD 0x9C |
| #define REG_STAT_SEL 0xA0 |
| #define REG_FAIL 0xB0 |
| #define REG_ALT_STAT 0xB8 |
| #define REG_DRIVE_ADRS 0xBC |
| |
| #define DALE_DATA_SLOW 0x00040000L |
| #define DALE_DATA_MODE2 0x00040000L |
| #define DALE_DATA_MODE3 0x00050000L |
| #define DALE_DATA_MODE4 0x00060000L |
| #define DALE_DATA_MODE5 0x00070000L |
| |
| #define BIGD_DATA_SLOW 0x00000000L |
| #define BIGD_DATA_MODE0 0x00000000L |
| #define BIGD_DATA_MODE2 0x00000000L |
| #define BIGD_DATA_MODE3 0x00000008L |
| #define BIGD_DATA_MODE4 0x00000010L |
| #define BIGD_DATA_MODE5 0x00000020L |
| |
| #define RTR_LOCAL_RANGE 0x000 |
| #define RTR_LOCAL_REMAP 0x004 |
| #define RTR_EXP_RANGE 0x010 |
| #define RTR_EXP_REMAP 0x014 |
| #define RTR_REGIONS 0x018 |
| #define RTR_DM_MASK 0x01C |
| #define RTR_DM_LOCAL_BASE 0x020 |
| #define RTR_DM_IO_BASE 0x024 |
| #define RTR_DM_PCI_REMAP 0x028 |
| #define RTR_DM_IO_CONFIG 0x02C |
| #define RTR_MAILBOX 0x040 |
| #define RTR_LOCAL_DOORBELL 0x060 |
| #define RTR_PCI_DOORBELL 0x064 |
| #define RTR_INT_CONTROL_STATUS 0x068 |
| #define RTR_EEPROM_CONTROL_STATUS 0x06C |
| |
| #define RTR_DMA0_MODE 0x0080 |
| #define RTR_DMA0_PCI_ADDR 0x0084 |
| #define RTR_DMA0_LOCAL_ADDR 0x0088 |
| #define RTR_DMA0_COUNT 0x008C |
| #define RTR_DMA0_DESC_PTR 0x0090 |
| #define RTR_DMA1_MODE 0x0094 |
| #define RTR_DMA1_PCI_ADDR 0x0098 |
| #define RTR_DMA1_LOCAL_ADDR 0x009C |
| #define RTR_DMA1_COUNT 0x00A0 |
| #define RTR_DMA1_DESC_PTR 0x00A4 |
| #define RTR_DMA_COMMAND_STATUS 0x00A8 |
| #define RTR_DMA_ARB0 0x00AC |
| #define RTR_DMA_ARB1 0x00B0 |
| |
| #define RTL_DMA0_MODE 0x00 |
| #define RTL_DMA0_PCI_ADDR 0x04 |
| #define RTL_DMA0_LOCAL_ADDR 0x08 |
| #define RTL_DMA0_COUNT 0x0C |
| #define RTL_DMA0_DESC_PTR 0x10 |
| #define RTL_DMA1_MODE 0x14 |
| #define RTL_DMA1_PCI_ADDR 0x18 |
| #define RTL_DMA1_LOCAL_ADDR 0x1C |
| #define RTL_DMA1_COUNT 0x20 |
| #define RTL_DMA1_DESC_PTR 0x24 |
| #define RTL_DMA_COMMAND_STATUS 0x28 |
| #define RTL_DMA_ARB0 0x2C |
| #define RTL_DMA_ARB1 0x30 |
| |
| /************************************************/ |
| /* Dale Scratchpad locations */ |
| /************************************************/ |
| #define DALE_CHANNEL_DEVICE_0 0 // device channel locations |
| #define DALE_CHANNEL_DEVICE_1 1 |
| #define DALE_CHANNEL_DEVICE_2 2 |
| #define DALE_CHANNEL_DEVICE_3 3 |
| |
| #define DALE_SCRATCH_DEVICE_0 4 // device type codes |
| #define DALE_SCRATCH_DEVICE_1 5 |
| #define DALE_SCRATCH_DEVICE_2 6 |
| #define DALE_SCRATCH_DEVICE_3 7 |
| |
| #define DALE_RAID_0_STATUS 8 |
| #define DALE_RAID_1_STATUS 9 |
| |
| #define DALE_TIMING_MODE 12 // bus master timing mode (2, 3, 4, 5) |
| #define DALE_NUM_DRIVES 13 // number of addressable drives on this board |
| #define DALE_RAID_ON 14 // RAID status On |
| #define DALE_LAST_ERROR 15 // Last error code from BIOS |
| |
| /************************************************/ |
| /* BigD Scratchpad locations */ |
| /************************************************/ |
| #define BIGD_DEVICE_0 0 // device channel locations |
| #define BIGD_DEVICE_1 1 |
| #define BIGD_DEVICE_2 2 |
| #define BIGD_DEVICE_3 3 |
| |
| #define BIGD_DEVICE_4 4 // device type codes |
| #define BIGD_DEVICE_5 5 |
| #define BIGD_DEVICE_6 6 |
| #define BIGD_DEVICE_7 7 |
| |
| #define BIGD_ALARM_IMAGE 11 // ~image of alarm fail register |
| #define BIGD_TIMING_MODE 12 // bus master timing mode (2, 3, 4, 5) |
| #define BIGD_NUM_DRIVES 13 // number of addressable drives on this board |
| #define BIGD_RAID_ON 14 // RAID status is on for the whole board |
| #define BIGD_LAST_ERROR 15 // Last error code from BIOS |
| |
| #define BIGD_RAID_0_STATUS 16 |
| #define BIGD_RAID_1_STATUS 17 |
| #define BIGD_RAID_2_STATUS 18 |
| #define BIGD_RAID_3_STATUS 19 |
| #define BIGD_RAID_4_STATUS 20 |
| #define BIGD_RAID_5_STATUS 21 |
| #define BIGD_RAID_6_STATUS 22 |
| #define BIGD_RAID_7_STATUS 23 |
| |
| /************************************************/ |
| /* Dale cable select bits */ |
| /************************************************/ |
| #define SEL_NONE 0x00 |
| #define SEL_1 0x01 |
| #define SEL_2 0x02 |
| #define SEL_3 0x04 |
| #define SEL_4 0x08 |
| #define SEL_NEW_SPEED_1 0x20 |
| #define SEL_COPY 0x40 |
| #define SEL_IRQ_OFF 0x80 |
| |
| /************************************************/ |
| /* Device/Geometry controls */ |
| /************************************************/ |
| #define GEOMETRY_NONE 0x0 // No device |
| #define GEOMETRY_SET 0x1 // Geometry set |
| #define GEOMETRY_LBA 0x2 // Geometry set in default LBA mode |
| #define GEOMETRY_PHOENIX 0x3 // Geometry set in Pheonix BIOS compatibility mode |
| |
| #define DEVICE_NONE 0x0 // No device present |
| #define DEVICE_INACTIVE 0x1 // device present but not registered active |
| #define DEVICE_ATAPI 0x2 // ATAPI device (CD_ROM, Tape, Etc...) |
| #define DEVICE_DASD_NONLBA 0x3 // Non LBA incompatible device |
| #define DEVICE_DASD_LBA 0x4 // LBA compatible device |
| |
| /************************************************/ |
| /* BigD fail register bits */ |
| /************************************************/ |
| #define FAIL_NONE 0x00 |
| #define FAIL_0 0x01 |
| #define FAIL_1 0x02 |
| #define FAIL_2 0x04 |
| #define FAIL_MULTIPLE 0x08 |
| #define FAIL_GOOD 0x20 |
| #define FAIL_AUDIBLE 0x40 |
| #define FAIL_ANY 0x80 |
| |
| /************************************************/ |
| /* Setup Structure Definitions */ |
| /************************************************/ |
| typedef struct // device setup parameters |
| { |
| UCHAR geometryControl; // geometry control flags |
| UCHAR device; // device code |
| USHORT sectors; // number of sectors per track |
| USHORT heads; // number of heads |
| USHORT cylinders; // number of cylinders for this device |
| ULONG blocks; // number of blocks on device |
| ULONG realCapacity; // number of real blocks on this device for drive changed testing |
| } SETUP_DEVICE, *PSETUP_DEVICE; |
| |
| typedef struct // master setup structure |
| { |
| USHORT startupDelay; |
| BOOL promptBIOS; |
| BOOL fastFormat; |
| BOOL shareInterrupt; |
| BOOL rebootRebuild; |
| USHORT timingMode; |
| USHORT spare5; |
| USHORT spare6; |
| SETUP_DEVICE setupDevice[BIGD_MAXDRIVES]; |
| } SETUP, *PSETUP; |
| |
| /************************************************/ |
| /* RAID Structure Definitions */ |
| /************************************************/ |
| typedef struct |
| { |
| UCHAR signature; // 0x55 our mirror signature |
| UCHAR status; // current status bits |
| UCHAR pairIdentifier; // unique identifier for pair |
| ULONG reconstructPoint; // recontruction point for hot reconstruct |
| } DISK_MIRROR; |
| |
| typedef struct DEVICE_RAID1 |
| { |
| long TotalSectors; |
| DISK_MIRROR DiskRaid1; |
| } DEVICE_RAID1, *PDEVICE_RAID1; |
| |
| #define DISK_MIRROR_POSITION 0x01A8 |
| #define SIGNATURE 0x55 |
| |
| #define MASK_SERIAL_NUMBER 0x0FFE // mask for serial number matching |
| #define MASK_SERIAL_UNIT 0x0001 // mask for unit portion of serial number |
| |
| // Status bits |
| #define UCBF_MIRRORED 0x0010 // drive has a pair |
| #define UCBF_MATCHED 0x0020 // drive pair is matched |
| #define UCBF_SURVIVOR 0x0040 // this unit is a survivor of a pair |
| #define UCBF_REBUILD 0x0080 // rebuild in progress on this device |
| |
| // SCSI controls for RAID |
| #define SC_MY_RAID 0xBF // our special CDB command byte for Win95... interface |
| #define MY_SCSI_QUERY1 0x32 // byte 1 subcommand to query driver for RAID 1 informatation |
| #define MY_SCSI_REBUILD 0x40 // byte 1 subcommand to reconstruct a mirrored pair |
| #define MY_SCSI_DEMOFAIL 0x54 // byte 1 subcommand for RAID failure demonstration |
| #define MY_SCSI_ALARMMUTE 0x60 // byte 1 subcommand to mute any alarm currently on |
| |
| /************************************************/ |
| /* Timeout konstants */ |
| /************************************************/ |
| #define TIMEOUT_READY 100 // 100 mSec |
| #define TIMEOUT_DRQ 300 // 300 mSec |
| #define TIMEOUT_DATA (3 * HZ) // 3 seconds |
| |
| /************************************************/ |
| /* Misc. macros */ |
| /************************************************/ |
| #define ANY2SCSI(up, p) \ |
| ((UCHAR *)up)[0] = (((ULONG)(p)) >> 8); \ |
| ((UCHAR *)up)[1] = ((ULONG)(p)); |
| |
| #define SCSI2LONG(up) \ |
| ( (((long)*(((UCHAR *)up))) << 16) \ |
| + (((long)(((UCHAR *)up)[1])) << 8) \ |
| + ((long)(((UCHAR *)up)[2])) ) |
| |
| #define XANY2SCSI(up, p) \ |
| ((UCHAR *)up)[0] = ((long)(p)) >> 24; \ |
| ((UCHAR *)up)[1] = ((long)(p)) >> 16; \ |
| ((UCHAR *)up)[2] = ((long)(p)) >> 8; \ |
| ((UCHAR *)up)[3] = ((long)(p)); |
| |
| #define XSCSI2LONG(up) \ |
| ( (((long)(((UCHAR *)up)[0])) << 24) \ |
| + (((long)(((UCHAR *)up)[1])) << 16) \ |
| + (((long)(((UCHAR *)up)[2])) << 8) \ |
| + ((long)(((UCHAR *)up)[3])) ) |
| |
| #define SelectSpigot(padapter,spigot) outb_p (spigot, padapter->regStatSel) |
| #define WriteCommand(padapter,cmd) outb_p (cmd, padapter->regStatCmd) |
| #define AtapiDevice(padapter,b) outb_p (b, padapter->regLba24); |
| #define AtapiCountLo(padapter,b) outb_p (b, padapter->regLba8) |
| #define AtapiCountHi(padapter,b) outb_p (b, padapter->regLba16) |
| |
| /************************************************/ |
| /* SCSI CDB operation codes */ |
| /************************************************/ |
| #define SCSIOP_TEST_UNIT_READY 0x00 |
| #define SCSIOP_REZERO_UNIT 0x01 |
| #define SCSIOP_REWIND 0x01 |
| #define SCSIOP_REQUEST_BLOCK_ADDR 0x02 |
| #define SCSIOP_REQUEST_SENSE 0x03 |
| #define SCSIOP_FORMAT_UNIT 0x04 |
| #define SCSIOP_READ_BLOCK_LIMITS 0x05 |
| #define SCSIOP_REASSIGN_BLOCKS 0x07 |
| #define SCSIOP_READ6 0x08 |
| #define SCSIOP_RECEIVE 0x08 |
| #define SCSIOP_WRITE6 0x0A |
| #define SCSIOP_PRINT 0x0A |
| #define SCSIOP_SEND 0x0A |
| #define SCSIOP_SEEK6 0x0B |
| #define SCSIOP_TRACK_SELECT 0x0B |
| #define SCSIOP_SLEW_PRINT 0x0B |
| #define SCSIOP_SEEK_BLOCK 0x0C |
| #define SCSIOP_PARTITION 0x0D |
| #define SCSIOP_READ_REVERSE 0x0F |
| #define SCSIOP_WRITE_FILEMARKS 0x10 |
| #define SCSIOP_FLUSH_BUFFER 0x10 |
| #define SCSIOP_SPACE 0x11 |
| #define SCSIOP_INQUIRY 0x12 |
| #define SCSIOP_VERIFY6 0x13 |
| #define SCSIOP_RECOVER_BUF_DATA 0x14 |
| #define SCSIOP_MODE_SELECT 0x15 |
| #define SCSIOP_RESERVE_UNIT 0x16 |
| #define SCSIOP_RELEASE_UNIT 0x17 |
| #define SCSIOP_COPY 0x18 |
| #define SCSIOP_ERASE 0x19 |
| #define SCSIOP_MODE_SENSE 0x1A |
| #define SCSIOP_START_STOP_UNIT 0x1B |
| #define SCSIOP_STOP_PRINT 0x1B |
| #define SCSIOP_LOAD_UNLOAD 0x1B |
| #define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C |
| #define SCSIOP_SEND_DIAGNOSTIC 0x1D |
| #define SCSIOP_MEDIUM_REMOVAL 0x1E |
| #define SCSIOP_READ_CAPACITY 0x25 |
| #define SCSIOP_READ 0x28 |
| #define SCSIOP_WRITE 0x2A |
| #define SCSIOP_SEEK 0x2B |
| #define SCSIOP_LOCATE 0x2B |
| #define SCSIOP_WRITE_VERIFY 0x2E |
| #define SCSIOP_VERIFY 0x2F |
| #define SCSIOP_SEARCH_DATA_HIGH 0x30 |
| #define SCSIOP_SEARCH_DATA_EQUAL 0x31 |
| #define SCSIOP_SEARCH_DATA_LOW 0x32 |
| #define SCSIOP_SET_LIMITS 0x33 |
| #define SCSIOP_READ_POSITION 0x34 |
| #define SCSIOP_SYNCHRONIZE_CACHE 0x35 |
| #define SCSIOP_COMPARE 0x39 |
| #define SCSIOP_COPY_COMPARE 0x3A |
| #define SCSIOP_WRITE_DATA_BUFF 0x3B |
| #define SCSIOP_READ_DATA_BUFF 0x3C |
| #define SCSIOP_CHANGE_DEFINITION 0x40 |
| #define SCSIOP_READ_SUB_CHANNEL 0x42 |
| #define SCSIOP_READ_TOC 0x43 |
| #define SCSIOP_READ_HEADER 0x44 |
| #define SCSIOP_PLAY_AUDIO 0x45 |
| #define SCSIOP_PLAY_AUDIO_MSF 0x47 |
| #define SCSIOP_PLAY_TRACK_INDEX 0x48 |
| #define SCSIOP_PLAY_TRACK_RELATIVE 0x49 |
| #define SCSIOP_PAUSE_RESUME 0x4B |
| #define SCSIOP_LOG_SELECT 0x4C |
| #define SCSIOP_LOG_SENSE 0x4D |
| #define SCSIOP_MODE_SELECT10 0x55 |
| #define SCSIOP_MODE_SENSE10 0x5A |
| #define SCSIOP_LOAD_UNLOAD_SLOT 0xA6 |
| #define SCSIOP_MECHANISM_STATUS 0xBD |
| #define SCSIOP_READ_CD 0xBE |
| |
| // IDE command definitions |
| #define IDE_COMMAND_ATAPI_RESET 0x08 |
| #define IDE_COMMAND_READ 0x20 |
| #define IDE_COMMAND_WRITE 0x30 |
| #define IDE_COMMAND_RECALIBRATE 0x10 |
| #define IDE_COMMAND_SEEK 0x70 |
| #define IDE_COMMAND_SET_PARAMETERS 0x91 |
| #define IDE_COMMAND_VERIFY 0x40 |
| #define IDE_COMMAND_ATAPI_PACKET 0xA0 |
| #define IDE_COMMAND_ATAPI_IDENTIFY 0xA1 |
| #define IDE_CMD_READ_MULTIPLE 0xC4 |
| #define IDE_CMD_WRITE_MULTIPLE 0xC5 |
| #define IDE_CMD_SET_MULTIPLE 0xC6 |
| #define IDE_COMMAND_IDENTIFY 0xEC |
| |
| // IDE status definitions |
| #define IDE_STATUS_ERROR 0x01 |
| #define IDE_STATUS_INDEX 0x02 |
| #define IDE_STATUS_CORRECTED_ERROR 0x04 |
| #define IDE_STATUS_DRQ 0x08 |
| #define IDE_STATUS_DSC 0x10 |
| #define IDE_STATUS_WRITE_FAULT 0x20 |
| #define IDE_STATUS_DRDY 0x40 |
| #define IDE_STATUS_BUSY 0x80 |
| |
| typedef struct _ATAPI_STATUS |
| { |
| CHAR check :1; |
| CHAR reserved1 :1; |
| CHAR corr :1; |
| CHAR drq :1; |
| CHAR dsc :1; |
| CHAR reserved2 :1; |
| CHAR drdy :1; |
| CHAR bsy :1; |
| } ATAPI_STATUS; |
| |
| typedef struct _ATAPI_REASON |
| { |
| CHAR cod :1; |
| CHAR io :1; |
| CHAR reserved1 :6; |
| } ATAPI_REASON; |
| |
| typedef struct _ATAPI_ERROR |
| { |
| CHAR ili :1; |
| CHAR eom :1; |
| CHAR abort :1; |
| CHAR mcr :1; |
| CHAR senseKey :4; |
| } ATAPI_ERROR; |
| |
| // IDE error definitions |
| #define IDE_ERROR_AMNF 0x01 |
| #define IDE_ERROR_TKONF 0x02 |
| #define IDE_ERROR_ABRT 0x04 |
| #define IDE_ERROR_MCR 0x08 |
| #define IDE_ERROR_IDFN 0x10 |
| #define IDE_ERROR_MC 0x20 |
| #define IDE_ERROR_UNC 0x40 |
| #define IDE_ERROR_BBK 0x80 |
| |
| // SCSI read capacity structure |
| typedef struct _READ_CAPACITY_DATA |
| { |
| ULONG blks; /* total blocks (converted to little endian) */ |
| ULONG blksiz; /* size of each (converted to little endian) */ |
| } READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA; |
| |
| // SCSI inquiry data |
| typedef struct _INQUIRYDATA |
| { |
| UCHAR DeviceType :5; |
| UCHAR DeviceTypeQualifier :3; |
| UCHAR DeviceTypeModifier :7; |
| UCHAR RemovableMedia :1; |
| UCHAR Versions; |
| UCHAR ResponseDataFormat; |
| UCHAR AdditionalLength; |
| UCHAR Reserved[2]; |
| UCHAR SoftReset :1; |
| UCHAR CommandQueue :1; |
| UCHAR Reserved2 :1; |
| UCHAR LinkedCommands :1; |
| UCHAR Synchronous :1; |
| UCHAR Wide16Bit :1; |
| UCHAR Wide32Bit :1; |
| UCHAR RelativeAddressing :1; |
| UCHAR VendorId[8]; |
| UCHAR ProductId[16]; |
| UCHAR ProductRevisionLevel[4]; |
| UCHAR VendorSpecific[20]; |
| UCHAR Reserved3[40]; |
| } INQUIRYDATA, *PINQUIRYDATA; |
| |
| // IDE IDENTIFY data |
| #pragma pack (1) |
| typedef struct _IDENTIFY_DATA |
| { |
| USHORT GeneralConfiguration; // 0 |
| USHORT NumberOfCylinders; // 1 |
| USHORT Reserved1; // 2 |
| USHORT NumberOfHeads; // 3 |
| USHORT UnformattedBytesPerTrack; // 4 |
| USHORT UnformattedBytesPerSector; // 5 |
| USHORT SectorsPerTrack; // 6 |
| USHORT NumBytesISG; // 7 Byte Len - inter-sector gap |
| USHORT NumBytesSync; // 8 - sync field |
| USHORT NumWordsVUS; // 9 Len - Vendor Unique Info |
| USHORT SerialNumber[10]; // 10 |
| USHORT BufferType; // 20 |
| USHORT BufferSectorSize; // 21 |
| USHORT NumberOfEccBytes; // 22 |
| USHORT FirmwareRevision[4]; // 23 |
| USHORT ModelNumber[20]; // 27 |
| USHORT NumSectorsPerInt :8; // 47 Multiple Mode - Sec/Blk |
| USHORT Reserved2 :8; // 47 |
| USHORT DoubleWordMode; // 48 flag for double word mode capable |
| USHORT VendorUnique1 :8; // 49 |
| USHORT SupportDMA :1; // 49 DMA supported |
| USHORT SupportLBA :1; // 49 LBA supported |
| USHORT SupportIORDYDisable :1; // 49 IORDY can be disabled |
| USHORT SupportIORDY :1; // 49 IORDY supported |
| USHORT ReservedPsuedoDMA :1; // 49 reserved for pseudo DMA mode support |
| USHORT Reserved3 :3; // 49 |
| USHORT Reserved4; // 50 |
| USHORT Reserved5 :8; // 51 Transfer Cycle Timing - PIO |
| USHORT PIOCycleTime :8; // 51 Transfer Cycle Timing - PIO |
| USHORT Reserved6 :8; // 52 - DMA |
| USHORT DMACycleTime :8; // 52 - DMA |
| USHORT Valid_54_58 :1; // 53 words 54 - 58 are valid |
| USHORT Valid_64_70 :1; // 53 words 64 - 70 are valid |
| USHORT Reserved7 :14; // 53 |
| USHORT LogNumCyl; // 54 Current Translation - Num Cyl |
| USHORT LogNumHeads; // 55 Num Heads |
| USHORT LogSectorsPerTrack; // 56 Sec/Trk |
| ULONG LogTotalSectors; // 57 Total Sec |
| USHORT CurrentNumSecPerInt :8; // 59 current setting for number of sectors per interrupt |
| USHORT ValidNumSecPerInt :1; // 59 Current setting is valid for number of sectors per interrupt |
| USHORT Reserved8 :7; // 59 |
| ULONG LBATotalSectors; // 60 LBA Mode - Sectors |
| USHORT DMASWordFlags; // 62 |
| USHORT DMAMWordFlags; // 63 |
| USHORT AdvancedPIOSupport :8; // 64 Flow control PIO transfer modes supported |
| USHORT Reserved9 :8; // 64 |
| USHORT MinMultiDMACycle; // 65 minimum multiword DMA transfer cycle time per word |
| USHORT RecomendDMACycle; // 66 Manufacturer's recommende multiword DMA transfer cycle time |
| USHORT MinPIOCycleWithoutFlow; // 67 Minimum PIO transfer cycle time without flow control |
| USHORT MinPIOCylceWithFlow; // 68 Minimum PIO transfer cycle time with IORDY flow control |
| USHORT ReservedSpace[256-69]; // 69 |
| } IDENTIFY_DATA, *PIDENTIFY_DATA; |
| |
| // ATAPI configuration bits |
| typedef struct _ATAPI_GENERAL_0 |
| { |
| USHORT CmdPacketSize :2; // Command packet size |
| USHORT Reserved1 :3; |
| USHORT CmdDrqType :2; |
| USHORT Removable :1; |
| USHORT DeviceType :5; |
| USHORT Reserved2 :1; |
| USHORT ProtocolType :2; |
| } ATAPI_GENERAL_0; |
| |
| #pragma pack () |