| /* |
| * i.MX IPUv3 Graphics driver |
| * |
| * Copyright (C) 2011 Sascha Hauer, Pengutronix |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/component.h> |
| #include <linux/module.h> |
| #include <linux/export.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <linux/fb.h> |
| #include <linux/clk.h> |
| #include <linux/errno.h> |
| #include <linux/reservation.h> |
| #include <linux/dma-buf.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| |
| #include <video/imx-ipu-v3.h> |
| #include "imx-drm.h" |
| #include "ipuv3-plane.h" |
| |
| #define DRIVER_DESC "i.MX IPUv3 Graphics" |
| |
| enum ipu_flip_status { |
| IPU_FLIP_NONE, |
| IPU_FLIP_PENDING, |
| IPU_FLIP_SUBMITTED, |
| }; |
| |
| struct ipu_flip_work { |
| struct work_struct unref_work; |
| struct drm_gem_object *bo; |
| struct drm_pending_vblank_event *page_flip_event; |
| struct work_struct fence_work; |
| struct ipu_crtc *crtc; |
| struct fence *excl; |
| unsigned shared_count; |
| struct fence **shared; |
| }; |
| |
| struct ipu_crtc { |
| struct device *dev; |
| struct drm_crtc base; |
| struct imx_drm_crtc *imx_crtc; |
| |
| /* plane[0] is the full plane, plane[1] is the partial plane */ |
| struct ipu_plane *plane[2]; |
| |
| struct ipu_dc *dc; |
| struct ipu_di *di; |
| int enabled; |
| enum ipu_flip_status flip_state; |
| struct workqueue_struct *flip_queue; |
| struct ipu_flip_work *flip_work; |
| int irq; |
| u32 bus_format; |
| int di_hsync_pin; |
| int di_vsync_pin; |
| }; |
| |
| #define to_ipu_crtc(x) container_of(x, struct ipu_crtc, base) |
| |
| static void ipu_fb_enable(struct ipu_crtc *ipu_crtc) |
| { |
| struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent); |
| |
| if (ipu_crtc->enabled) |
| return; |
| |
| ipu_dc_enable(ipu); |
| ipu_plane_enable(ipu_crtc->plane[0]); |
| /* Start DC channel and DI after IDMAC */ |
| ipu_dc_enable_channel(ipu_crtc->dc); |
| ipu_di_enable(ipu_crtc->di); |
| drm_crtc_vblank_on(&ipu_crtc->base); |
| |
| ipu_crtc->enabled = 1; |
| } |
| |
| static void ipu_fb_disable(struct ipu_crtc *ipu_crtc) |
| { |
| struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent); |
| |
| if (!ipu_crtc->enabled) |
| return; |
| |
| /* Stop DC channel and DI before IDMAC */ |
| ipu_dc_disable_channel(ipu_crtc->dc); |
| ipu_di_disable(ipu_crtc->di); |
| ipu_plane_disable(ipu_crtc->plane[0]); |
| ipu_dc_disable(ipu); |
| drm_crtc_vblank_off(&ipu_crtc->base); |
| |
| ipu_crtc->enabled = 0; |
| } |
| |
| static void ipu_crtc_dpms(struct drm_crtc *crtc, int mode) |
| { |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| |
| dev_dbg(ipu_crtc->dev, "%s mode: %d\n", __func__, mode); |
| |
| switch (mode) { |
| case DRM_MODE_DPMS_ON: |
| ipu_fb_enable(ipu_crtc); |
| break; |
| case DRM_MODE_DPMS_STANDBY: |
| case DRM_MODE_DPMS_SUSPEND: |
| case DRM_MODE_DPMS_OFF: |
| ipu_fb_disable(ipu_crtc); |
| break; |
| } |
| } |
| |
| static void ipu_flip_unref_work_func(struct work_struct *__work) |
| { |
| struct ipu_flip_work *work = |
| container_of(__work, struct ipu_flip_work, unref_work); |
| |
| drm_gem_object_unreference_unlocked(work->bo); |
| kfree(work); |
| } |
| |
| static void ipu_flip_fence_work_func(struct work_struct *__work) |
| { |
| struct ipu_flip_work *work = |
| container_of(__work, struct ipu_flip_work, fence_work); |
| int i; |
| |
| /* wait for all fences attached to the FB obj to signal */ |
| if (work->excl) { |
| fence_wait(work->excl, false); |
| fence_put(work->excl); |
| } |
| for (i = 0; i < work->shared_count; i++) { |
| fence_wait(work->shared[i], false); |
| fence_put(work->shared[i]); |
| } |
| |
| work->crtc->flip_state = IPU_FLIP_SUBMITTED; |
| } |
| |
| static int ipu_page_flip(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_pending_vblank_event *event, |
| uint32_t page_flip_flags) |
| { |
| struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0); |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| struct ipu_flip_work *flip_work; |
| int ret; |
| |
| if (ipu_crtc->flip_state != IPU_FLIP_NONE) |
| return -EBUSY; |
| |
| ret = imx_drm_crtc_vblank_get(ipu_crtc->imx_crtc); |
| if (ret) { |
| dev_dbg(ipu_crtc->dev, "failed to acquire vblank counter\n"); |
| list_del(&event->base.link); |
| |
| return ret; |
| } |
| |
| flip_work = kzalloc(sizeof *flip_work, GFP_KERNEL); |
| if (!flip_work) { |
| ret = -ENOMEM; |
| goto put_vblank; |
| } |
| INIT_WORK(&flip_work->unref_work, ipu_flip_unref_work_func); |
| flip_work->page_flip_event = event; |
| |
| /* get BO backing the old framebuffer and take a reference */ |
| flip_work->bo = &drm_fb_cma_get_gem_obj(crtc->primary->fb, 0)->base; |
| drm_gem_object_reference(flip_work->bo); |
| |
| ipu_crtc->flip_work = flip_work; |
| /* |
| * If the object has a DMABUF attached, we need to wait on its fences |
| * if there are any. |
| */ |
| if (cma_obj->base.dma_buf) { |
| INIT_WORK(&flip_work->fence_work, ipu_flip_fence_work_func); |
| flip_work->crtc = ipu_crtc; |
| |
| ret = reservation_object_get_fences_rcu( |
| cma_obj->base.dma_buf->resv, &flip_work->excl, |
| &flip_work->shared_count, &flip_work->shared); |
| |
| if (unlikely(ret)) { |
| DRM_ERROR("failed to get fences for buffer\n"); |
| goto free_flip_work; |
| } |
| |
| /* No need to queue the worker if the are no fences */ |
| if (!flip_work->excl && !flip_work->shared_count) { |
| ipu_crtc->flip_state = IPU_FLIP_SUBMITTED; |
| } else { |
| ipu_crtc->flip_state = IPU_FLIP_PENDING; |
| queue_work(ipu_crtc->flip_queue, |
| &flip_work->fence_work); |
| } |
| } else { |
| ipu_crtc->flip_state = IPU_FLIP_SUBMITTED; |
| } |
| |
| return 0; |
| |
| free_flip_work: |
| drm_gem_object_unreference_unlocked(flip_work->bo); |
| kfree(flip_work); |
| ipu_crtc->flip_work = NULL; |
| put_vblank: |
| imx_drm_crtc_vblank_put(ipu_crtc->imx_crtc); |
| |
| return ret; |
| } |
| |
| static const struct drm_crtc_funcs ipu_crtc_funcs = { |
| .set_config = drm_crtc_helper_set_config, |
| .destroy = drm_crtc_cleanup, |
| .page_flip = ipu_page_flip, |
| }; |
| |
| static int ipu_crtc_mode_set(struct drm_crtc *crtc, |
| struct drm_display_mode *orig_mode, |
| struct drm_display_mode *mode, |
| int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_encoder *encoder; |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| struct ipu_di_signal_cfg sig_cfg = {}; |
| unsigned long encoder_types = 0; |
| int ret; |
| |
| dev_dbg(ipu_crtc->dev, "%s: mode->hdisplay: %d\n", __func__, |
| mode->hdisplay); |
| dev_dbg(ipu_crtc->dev, "%s: mode->vdisplay: %d\n", __func__, |
| mode->vdisplay); |
| |
| list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) |
| if (encoder->crtc == crtc) |
| encoder_types |= BIT(encoder->encoder_type); |
| |
| dev_dbg(ipu_crtc->dev, "%s: attached to encoder types 0x%lx\n", |
| __func__, encoder_types); |
| |
| /* |
| * If we have DAC or LDB, then we need the IPU DI clock to be |
| * the same as the LDB DI clock. For TVDAC, derive the IPU DI |
| * clock from 27 MHz TVE_DI clock, but allow to divide it. |
| */ |
| if (encoder_types & (BIT(DRM_MODE_ENCODER_DAC) | |
| BIT(DRM_MODE_ENCODER_LVDS))) |
| sig_cfg.clkflags = IPU_DI_CLKMODE_SYNC | IPU_DI_CLKMODE_EXT; |
| else if (encoder_types & BIT(DRM_MODE_ENCODER_TVDAC)) |
| sig_cfg.clkflags = IPU_DI_CLKMODE_EXT; |
| else |
| sig_cfg.clkflags = 0; |
| |
| sig_cfg.enable_pol = 1; |
| sig_cfg.clk_pol = 0; |
| sig_cfg.bus_format = ipu_crtc->bus_format; |
| sig_cfg.v_to_h_sync = 0; |
| sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin; |
| sig_cfg.vsync_pin = ipu_crtc->di_vsync_pin; |
| |
| drm_display_mode_to_videomode(mode, &sig_cfg.mode); |
| |
| ret = ipu_dc_init_sync(ipu_crtc->dc, ipu_crtc->di, |
| mode->flags & DRM_MODE_FLAG_INTERLACE, |
| ipu_crtc->bus_format, mode->hdisplay); |
| if (ret) { |
| dev_err(ipu_crtc->dev, |
| "initializing display controller failed with %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = ipu_di_init_sync_panel(ipu_crtc->di, &sig_cfg); |
| if (ret) { |
| dev_err(ipu_crtc->dev, |
| "initializing panel failed with %d\n", ret); |
| return ret; |
| } |
| |
| return ipu_plane_mode_set(ipu_crtc->plane[0], crtc, mode, |
| crtc->primary->fb, |
| 0, 0, mode->hdisplay, mode->vdisplay, |
| x, y, mode->hdisplay, mode->vdisplay, |
| mode->flags & DRM_MODE_FLAG_INTERLACE); |
| } |
| |
| static void ipu_crtc_handle_pageflip(struct ipu_crtc *ipu_crtc) |
| { |
| unsigned long flags; |
| struct drm_device *drm = ipu_crtc->base.dev; |
| struct ipu_flip_work *work = ipu_crtc->flip_work; |
| |
| spin_lock_irqsave(&drm->event_lock, flags); |
| if (work->page_flip_event) |
| drm_crtc_send_vblank_event(&ipu_crtc->base, |
| work->page_flip_event); |
| imx_drm_crtc_vblank_put(ipu_crtc->imx_crtc); |
| spin_unlock_irqrestore(&drm->event_lock, flags); |
| } |
| |
| static irqreturn_t ipu_irq_handler(int irq, void *dev_id) |
| { |
| struct ipu_crtc *ipu_crtc = dev_id; |
| |
| imx_drm_handle_vblank(ipu_crtc->imx_crtc); |
| |
| if (ipu_crtc->flip_state == IPU_FLIP_SUBMITTED) { |
| struct ipu_plane *plane = ipu_crtc->plane[0]; |
| |
| ipu_plane_set_base(plane, ipu_crtc->base.primary->fb, |
| plane->x, plane->y); |
| ipu_crtc_handle_pageflip(ipu_crtc); |
| queue_work(ipu_crtc->flip_queue, |
| &ipu_crtc->flip_work->unref_work); |
| ipu_crtc->flip_state = IPU_FLIP_NONE; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static bool ipu_crtc_mode_fixup(struct drm_crtc *crtc, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| struct videomode vm; |
| int ret; |
| |
| drm_display_mode_to_videomode(adjusted_mode, &vm); |
| |
| ret = ipu_di_adjust_videomode(ipu_crtc->di, &vm); |
| if (ret) |
| return false; |
| |
| drm_display_mode_from_videomode(&vm, adjusted_mode); |
| |
| return true; |
| } |
| |
| static void ipu_crtc_prepare(struct drm_crtc *crtc) |
| { |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| |
| ipu_fb_disable(ipu_crtc); |
| } |
| |
| static void ipu_crtc_commit(struct drm_crtc *crtc) |
| { |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| |
| ipu_fb_enable(ipu_crtc); |
| } |
| |
| static const struct drm_crtc_helper_funcs ipu_helper_funcs = { |
| .dpms = ipu_crtc_dpms, |
| .mode_fixup = ipu_crtc_mode_fixup, |
| .mode_set = ipu_crtc_mode_set, |
| .prepare = ipu_crtc_prepare, |
| .commit = ipu_crtc_commit, |
| }; |
| |
| static int ipu_enable_vblank(struct drm_crtc *crtc) |
| { |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| |
| enable_irq(ipu_crtc->irq); |
| |
| return 0; |
| } |
| |
| static void ipu_disable_vblank(struct drm_crtc *crtc) |
| { |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| |
| disable_irq_nosync(ipu_crtc->irq); |
| } |
| |
| static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc, |
| u32 bus_format, int hsync_pin, int vsync_pin) |
| { |
| struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); |
| |
| ipu_crtc->bus_format = bus_format; |
| ipu_crtc->di_hsync_pin = hsync_pin; |
| ipu_crtc->di_vsync_pin = vsync_pin; |
| |
| return 0; |
| } |
| |
| static const struct imx_drm_crtc_helper_funcs ipu_crtc_helper_funcs = { |
| .enable_vblank = ipu_enable_vblank, |
| .disable_vblank = ipu_disable_vblank, |
| .set_interface_pix_fmt = ipu_set_interface_pix_fmt, |
| .crtc_funcs = &ipu_crtc_funcs, |
| .crtc_helper_funcs = &ipu_helper_funcs, |
| }; |
| |
| static void ipu_put_resources(struct ipu_crtc *ipu_crtc) |
| { |
| if (!IS_ERR_OR_NULL(ipu_crtc->dc)) |
| ipu_dc_put(ipu_crtc->dc); |
| if (!IS_ERR_OR_NULL(ipu_crtc->di)) |
| ipu_di_put(ipu_crtc->di); |
| } |
| |
| static int ipu_get_resources(struct ipu_crtc *ipu_crtc, |
| struct ipu_client_platformdata *pdata) |
| { |
| struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent); |
| int ret; |
| |
| ipu_crtc->dc = ipu_dc_get(ipu, pdata->dc); |
| if (IS_ERR(ipu_crtc->dc)) { |
| ret = PTR_ERR(ipu_crtc->dc); |
| goto err_out; |
| } |
| |
| ipu_crtc->di = ipu_di_get(ipu, pdata->di); |
| if (IS_ERR(ipu_crtc->di)) { |
| ret = PTR_ERR(ipu_crtc->di); |
| goto err_out; |
| } |
| |
| return 0; |
| err_out: |
| ipu_put_resources(ipu_crtc); |
| |
| return ret; |
| } |
| |
| static int ipu_crtc_init(struct ipu_crtc *ipu_crtc, |
| struct ipu_client_platformdata *pdata, struct drm_device *drm) |
| { |
| struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent); |
| int dp = -EINVAL; |
| int ret; |
| |
| ret = ipu_get_resources(ipu_crtc, pdata); |
| if (ret) { |
| dev_err(ipu_crtc->dev, "getting resources failed with %d.\n", |
| ret); |
| return ret; |
| } |
| |
| if (pdata->dp >= 0) |
| dp = IPU_DP_FLOW_SYNC_BG; |
| ipu_crtc->plane[0] = ipu_plane_init(drm, ipu, pdata->dma[0], dp, 0, |
| DRM_PLANE_TYPE_PRIMARY); |
| if (IS_ERR(ipu_crtc->plane[0])) { |
| ret = PTR_ERR(ipu_crtc->plane[0]); |
| goto err_put_resources; |
| } |
| |
| ret = imx_drm_add_crtc(drm, &ipu_crtc->base, &ipu_crtc->imx_crtc, |
| &ipu_crtc->plane[0]->base, &ipu_crtc_helper_funcs, |
| ipu_crtc->dev->of_node); |
| if (ret) { |
| dev_err(ipu_crtc->dev, "adding crtc failed with %d.\n", ret); |
| goto err_put_resources; |
| } |
| |
| ret = ipu_plane_get_resources(ipu_crtc->plane[0]); |
| if (ret) { |
| dev_err(ipu_crtc->dev, "getting plane 0 resources failed with %d.\n", |
| ret); |
| goto err_remove_crtc; |
| } |
| |
| /* If this crtc is using the DP, add an overlay plane */ |
| if (pdata->dp >= 0 && pdata->dma[1] > 0) { |
| ipu_crtc->plane[1] = ipu_plane_init(drm, ipu, pdata->dma[1], |
| IPU_DP_FLOW_SYNC_FG, |
| drm_crtc_mask(&ipu_crtc->base), |
| DRM_PLANE_TYPE_OVERLAY); |
| if (IS_ERR(ipu_crtc->plane[1])) |
| ipu_crtc->plane[1] = NULL; |
| } |
| |
| ipu_crtc->irq = ipu_plane_irq(ipu_crtc->plane[0]); |
| ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0, |
| "imx_drm", ipu_crtc); |
| if (ret < 0) { |
| dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret); |
| goto err_put_plane_res; |
| } |
| /* Only enable IRQ when we actually need it to trigger work. */ |
| disable_irq(ipu_crtc->irq); |
| |
| ipu_crtc->flip_queue = create_singlethread_workqueue("ipu-crtc-flip"); |
| |
| return 0; |
| |
| err_put_plane_res: |
| ipu_plane_put_resources(ipu_crtc->plane[0]); |
| err_remove_crtc: |
| imx_drm_remove_crtc(ipu_crtc->imx_crtc); |
| err_put_resources: |
| ipu_put_resources(ipu_crtc); |
| |
| return ret; |
| } |
| |
| static int ipu_drm_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct ipu_client_platformdata *pdata = dev->platform_data; |
| struct drm_device *drm = data; |
| struct ipu_crtc *ipu_crtc; |
| int ret; |
| |
| ipu_crtc = devm_kzalloc(dev, sizeof(*ipu_crtc), GFP_KERNEL); |
| if (!ipu_crtc) |
| return -ENOMEM; |
| |
| ipu_crtc->dev = dev; |
| |
| ret = ipu_crtc_init(ipu_crtc, pdata, drm); |
| if (ret) |
| return ret; |
| |
| dev_set_drvdata(dev, ipu_crtc); |
| |
| return 0; |
| } |
| |
| static void ipu_drm_unbind(struct device *dev, struct device *master, |
| void *data) |
| { |
| struct ipu_crtc *ipu_crtc = dev_get_drvdata(dev); |
| |
| imx_drm_remove_crtc(ipu_crtc->imx_crtc); |
| |
| destroy_workqueue(ipu_crtc->flip_queue); |
| ipu_plane_put_resources(ipu_crtc->plane[0]); |
| ipu_put_resources(ipu_crtc); |
| } |
| |
| static const struct component_ops ipu_crtc_ops = { |
| .bind = ipu_drm_bind, |
| .unbind = ipu_drm_unbind, |
| }; |
| |
| static int ipu_drm_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| int ret; |
| |
| if (!dev->platform_data) |
| return -EINVAL; |
| |
| ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); |
| if (ret) |
| return ret; |
| |
| return component_add(dev, &ipu_crtc_ops); |
| } |
| |
| static int ipu_drm_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &ipu_crtc_ops); |
| return 0; |
| } |
| |
| static struct platform_driver ipu_drm_driver = { |
| .driver = { |
| .name = "imx-ipuv3-crtc", |
| }, |
| .probe = ipu_drm_probe, |
| .remove = ipu_drm_remove, |
| }; |
| module_platform_driver(ipu_drm_driver); |
| |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:imx-ipuv3-crtc"); |