drivers/iio/adc/Kconfig - kernel/msm-4.9 - Gitiles

 #
 # ADC drivers
 #
 # When adding new entries keep the list in alphabetical order

 menu "Analog to digital converters"

 config AD_SIGMA_DELTA
 	tristate
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER

 config AD7266
 	tristate "Analog Devices AD7265/AD7266 ADC driver"
 	depends on SPI_MASTER
 	select IIO_BUFFER
 	select IIO_TRIGGER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices AD7265 and AD7266
 	  ADCs.

 	  To compile this driver as a module, choose M here: the module will be
 	  called ad7266.

 config AD7291
 	tristate "Analog Devices AD7291 ADC driver"
 	depends on I2C
 	help
 	  Say yes here to build support for Analog Devices AD7291
 	  8 Channel ADC with temperature sensor.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7291.

 config AD7298
 	tristate "Analog Devices AD7298 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices AD7298
 	  8 Channel ADC with temperature sensor.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7298.

 config AD7476
 	tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
 	  AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
 	  AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).

 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7476.

 config AD7791
 	tristate "Analog Devices AD7791 ADC driver"
 	depends on SPI
 	select AD_SIGMA_DELTA
 	help
 	  Say yes here to build support for Analog Devices AD7787, AD7788, AD7789,
 	  AD7790 and AD7791 SPI analog to digital converters (ADC).

 	  To compile this driver as a module, choose M here: the module will be
 	  called ad7791.

 config AD7793
 	tristate "Analog Devices AD7793 and similar ADCs driver"
 	depends on SPI
 	select AD_SIGMA_DELTA
 	help
 	  Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
 	  AD7794 and AD7795 SPI analog to digital converters (ADC).

 	  To compile this driver as a module, choose M here: the
 	  module will be called AD7793.

 config AD7887
 	tristate "Analog Devices AD7887 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices
 	  AD7887 SPI analog to digital converter (ADC).

 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7887.

 config AD7923
 	tristate "Analog Devices AD7923 and similar ADCs driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices
 	  AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7923.

 config AD799X
 	tristate "Analog Devices AD799x ADC driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices:
 	  ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
 	  i2c analog to digital converters (ADC). Provides direct access
 	  via sysfs.

 	  To compile this driver as a module, choose M here: the module will be
 	  called ad799x.

 config AT91_ADC
 	tristate "Atmel AT91 ADC"
 	depends on ARCH_AT91
 	depends on INPUT
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select SYSFS
 	help
 	  Say yes here to build support for Atmel AT91 ADC.

 	  To compile this driver as a module, choose M here: the module will be
 	  called at91_adc.

 config AXP288_ADC
 	tristate "X-Powers AXP288 ADC driver"
 	depends on MFD_AXP20X
 	help
 	  Say yes here to have support for X-Powers power management IC (PMIC) ADC
 	  device. Depending on platform configuration, this general purpose ADC can
 	  be used for sampling sensors such as thermal resistors.

 	  To compile this driver as a module, choose M here: the module will be
 	  called axp288_adc.

 config BERLIN2_ADC
 	tristate "Marvell Berlin2 ADC driver"
 	depends on ARCH_BERLIN
 	help
 	  Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for
 	  temperature measurement.

 config DA9150_GPADC
 	tristate "Dialog DA9150 GPADC driver support"
 	depends on MFD_DA9150
 	help
 	  Say yes here to build support for Dialog DA9150 GPADC.

 	  This driver can also be built as a module. If chosen, the module name
 	  will be da9150-gpadc.

 	  To compile this driver as a module, choose M here: the module will be
 	  called berlin2-adc.

 config CC10001_ADC
 	tristate "Cosmic Circuits 10001 ADC driver"
 	depends on HAS_IOMEM && HAVE_CLK && REGULATOR
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Cosmic Circuits 10001 ADC.

 	  This driver can also be built as a module. If so, the module will be
 	  called cc10001_adc.

 config EXYNOS_ADC
 	tristate "Exynos ADC driver support"
 	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
 	help
 	  Core support for the ADC block found in the Samsung EXYNOS series
 	  of SoCs for drivers such as the touchscreen and hwmon to use to share
 	  this resource.

 	  To compile this driver as a module, choose M here: the module will be
 	  called exynos_adc.

 config LP8788_ADC
 	tristate "LP8788 ADC driver"
 	depends on MFD_LP8788
 	help
 	  Say yes here to build support for TI LP8788 ADC.

 	  To compile this driver as a module, choose M here: the module will be
 	  called lp8788_adc.

 config MAX1027
 	tristate "Maxim max1027 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Maxim SPI ADC models
 	  max1027, max1029 and max1031.

 	  To compile this driver as a module, choose M here: the module will be
 	  called max1027.

 config MAX1363
 	tristate "Maxim max1363 ADC driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for many Maxim i2c analog to digital
 	  converters (ADC). (max1361, max1362, max1363, max1364, max1036,
 	  max1037, max1038, max1039, max1136, max1136, max1137, max1138,
 	  max1139, max1236, max1237, max11238, max1239, max11600, max11601,
 	  max11602, max11603, max11604, max11605, max11606, max11607,
 	  max11608, max11609, max11610, max11611, max11612, max11613,
 	  max11614, max11615, max11616, max11617, max11644, max11645,
 	  max11646, max11647) Provides direct access via sysfs and buffered
 	  data via the iio dev interface.

 	  To compile this driver as a module, choose M here: the module will be
 	  called max1363.

 config MCP320X
 	tristate "Microchip Technology MCP3x01/02/04/08"
 	depends on SPI
 	help
 	  Say yes here to build support for Microchip Technology's
 	  MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204,
 	  MCP3208 or MCP3301 analog to digital converter.

 	  This driver can also be built as a module. If so, the module will be
 	  called mcp320x.

 config MCP3422
 	tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
 	depends on I2C
 	help
 	  Say yes here to build support for Microchip Technology's
 	  MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
 	  analog to digital converters.

 	  This driver can also be built as a module. If so, the module will be
 	  called mcp3422.

 config MEN_Z188_ADC
 	tristate "MEN 16z188 ADC IP Core support"
 	depends on MCB
 	help
 	  Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB
 	  carrier.

 	  This driver can also be built as a module. If so, the module will be
 	  called men_z188_adc.

 config NAU7802
 	tristate "Nuvoton NAU7802 ADC driver"
 	depends on I2C
 	help
 	  Say yes here to build support for Nuvoton NAU7802 ADC.

 	  To compile this driver as a module, choose M here: the
 	  module will be called nau7802.

 config QCOM_SPMI_IADC
 	tristate "Qualcomm SPMI PMIC current ADC"
 	depends on SPMI
 	select REGMAP_SPMI
 	help
 	  This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.

 	  The driver supports single mode operation to read from one of two
 	  channels (external or internal). Hardware have additional
 	  channels internally used for gain and offset calibration.

 	  To compile this driver as a module, choose M here: the module will
 	  be called qcom-spmi-iadc.

 config QCOM_SPMI_VADC
 	tristate "Qualcomm SPMI PMIC voltage ADC"
 	depends on SPMI
 	select REGMAP_SPMI
 	help
 	  This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip.

 	  The driver supports multiple channels read. The VADC is a 15-bit
 	  sigma-delta ADC. Some of the channels are internally used for
 	  calibration.

 	  To compile this driver as a module, choose M here: the module will
 	  be called qcom-spmi-vadc.

 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
 	help
 	  Say yes here to build support for the SARADC found in SoCs from
 	  Rockchip.

 	  To compile this driver as a module, choose M here: the
 	  module will be called rockchip_saradc.

 config TI_ADC081C
 	tristate "Texas Instruments ADC081C021/027"
 	depends on I2C
 	help
 	  If you say yes here you get support for Texas Instruments ADC081C021
 	  and ADC081C027 ADC chips.

 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc081c.

 config TI_ADC128S052
 	tristate "Texas Instruments ADC128S052/ADC122S021"
 	depends on SPI
 	help
 	  If you say yes here you get support for Texas Instruments ADC128S052
 	  and ADC122S021 chips.

 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc128s052.

 config TI_AM335X_ADC
 	tristate "TI's AM335X ADC driver"
 	depends on MFD_TI_AM335X_TSCADC
 	select IIO_BUFFER
 	select IIO_KFIFO_BUF
 	help
 	  Say yes here to build support for Texas Instruments ADC
 	  driver which is also a MFD client.

 	  To compile this driver as a module, choose M here: the module will be
 	  called ti_am335x_adc.

 config TWL4030_MADC
 	tristate "TWL4030 MADC (Monitoring A/D Converter)"
 	depends on TWL4030_CORE
 	help
 	  This driver provides support for Triton TWL4030-MADC. The
 	  driver supports both RT and SW conversion methods.

 	  This driver can also be built as a module. If so, the module will be
 	  called twl4030-madc.

 config TWL6030_GPADC
 	tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
 	depends on TWL4030_CORE
 	default n
 	help
 	  Say yes here if you want support for the TWL6030/TWL6032 General
 	  Purpose A/D Converter. This will add support for battery type
 	  detection, battery voltage and temperature measurement, die
 	  temperature measurement, system supply voltage, audio accessory,
 	  USB ID detection.

 	  This driver can also be built as a module. If so, the module will be
 	  called twl6030-gpadc.

 config VF610_ADC
 	tristate "Freescale vf610 ADC driver"
 	depends on OF
 	help
 	  Say yes here to support for Vybrid board analog-to-digital converter.
 	  Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX.

 	  This driver can also be built as a module. If so, the module will be
 	  called vf610_adc.

 config VIPERBOARD_ADC
 	tristate "Viperboard ADC support"
 	depends on MFD_VIPERBOARD && USB
 	help
 	  Say yes here to access the ADC part of the Nano River
 	  Technologies Viperboard.

 	  To compile this driver as a module, choose M here: the module will be
 	  called viperboard_adc.

 config XILINX_XADC
 	tristate "Xilinx XADC driver"
 	depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
 	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to have support for the Xilinx XADC. The driver does support
 	  both the ZYNQ interface to the XADC as well as the AXI-XADC interface.

 	  The driver can also be build as a module. If so, the module will be called
 	  xilinx-xadc.

 endmenu
	#
	# ADC drivers
	#
	# When adding new entries keep the list in alphabetical order

	menu "Analog to digital converters"

	config AD_SIGMA_DELTA
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

	config AD7266
	tristate "Analog Devices AD7265/AD7266 ADC driver"
	depends on SPI_MASTER
	select IIO_BUFFER
	select IIO_TRIGGER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for Analog Devices AD7265 and AD7266
	ADCs.

	To compile this driver as a module, choose M here: the module will be
	called ad7266.

	config AD7291
	tristate "Analog Devices AD7291 ADC driver"
	depends on I2C
	help
	Say yes here to build support for Analog Devices AD7291
	8 Channel ADC with temperature sensor.

	To compile this driver as a module, choose M here: the
	module will be called ad7291.

	config AD7298
	tristate "Analog Devices AD7298 ADC driver"
	depends on SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for Analog Devices AD7298
	8 Channel ADC with temperature sensor.

	To compile this driver as a module, choose M here: the
	module will be called ad7298.

	config AD7476
	tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
	depends on SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
	AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
	AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).

	To compile this driver as a module, choose M here: the
	module will be called ad7476.

	config AD7791
	tristate "Analog Devices AD7791 ADC driver"
	depends on SPI
	select AD_SIGMA_DELTA
	help
	Say yes here to build support for Analog Devices AD7787, AD7788, AD7789,
	AD7790 and AD7791 SPI analog to digital converters (ADC).

	To compile this driver as a module, choose M here: the module will be
	called ad7791.

	config AD7793
	tristate "Analog Devices AD7793 and similar ADCs driver"
	depends on SPI
	select AD_SIGMA_DELTA
	help
	Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
	AD7794 and AD7795 SPI analog to digital converters (ADC).

	To compile this driver as a module, choose M here: the
	module will be called AD7793.

	config AD7887
	tristate "Analog Devices AD7887 ADC driver"
	depends on SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for Analog Devices
	AD7887 SPI analog to digital converter (ADC).

	To compile this driver as a module, choose M here: the
	module will be called ad7887.

	config AD7923
	tristate "Analog Devices AD7923 and similar ADCs driver"
	depends on SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for Analog Devices
	AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.

	To compile this driver as a module, choose M here: the
	module will be called ad7923.

	config AD799X
	tristate "Analog Devices AD799x ADC driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for Analog Devices:
	ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
	i2c analog to digital converters (ADC). Provides direct access
	via sysfs.

	To compile this driver as a module, choose M here: the module will be
	called ad799x.

	config AT91_ADC
	tristate "Atmel AT91 ADC"
	depends on ARCH_AT91
	depends on INPUT
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select SYSFS
	help
	Say yes here to build support for Atmel AT91 ADC.

	To compile this driver as a module, choose M here: the module will be
	called at91_adc.

	config AXP288_ADC
	tristate "X-Powers AXP288 ADC driver"
	depends on MFD_AXP20X
	help
	Say yes here to have support for X-Powers power management IC (PMIC) ADC
	device. Depending on platform configuration, this general purpose ADC can
	be used for sampling sensors such as thermal resistors.

	To compile this driver as a module, choose M here: the module will be
	called axp288_adc.

	config BERLIN2_ADC
	tristate "Marvell Berlin2 ADC driver"
	depends on ARCH_BERLIN
	help
	Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for
	temperature measurement.

	config DA9150_GPADC
	tristate "Dialog DA9150 GPADC driver support"
	depends on MFD_DA9150
	help
	Say yes here to build support for Dialog DA9150 GPADC.

	This driver can also be built as a module. If chosen, the module name
	will be da9150-gpadc.

	To compile this driver as a module, choose M here: the module will be
	called berlin2-adc.

	config CC10001_ADC
	tristate "Cosmic Circuits 10001 ADC driver"
	depends on HAS_IOMEM && HAVE_CLK && REGULATOR
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for Cosmic Circuits 10001 ADC.

	This driver can also be built as a module. If so, the module will be
	called cc10001_adc.

	config EXYNOS_ADC
	tristate "Exynos ADC driver support"
	depends on ARCH_EXYNOS \|\| ARCH_S3C24XX \|\| ARCH_S3C64XX \|\| (OF && COMPILE_TEST)
	help
	Core support for the ADC block found in the Samsung EXYNOS series
	of SoCs for drivers such as the touchscreen and hwmon to use to share
	this resource.

	To compile this driver as a module, choose M here: the module will be
	called exynos_adc.

	config LP8788_ADC
	tristate "LP8788 ADC driver"
	depends on MFD_LP8788
	help
	Say yes here to build support for TI LP8788 ADC.

	To compile this driver as a module, choose M here: the module will be
	called lp8788_adc.

	config MAX1027
	tristate "Maxim max1027 ADC driver"
	depends on SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for Maxim SPI ADC models
	max1027, max1029 and max1031.

	To compile this driver as a module, choose M here: the module will be
	called max1027.

	config MAX1363
	tristate "Maxim max1363 ADC driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to build support for many Maxim i2c analog to digital
	converters (ADC). (max1361, max1362, max1363, max1364, max1036,
	max1037, max1038, max1039, max1136, max1136, max1137, max1138,
	max1139, max1236, max1237, max11238, max1239, max11600, max11601,
	max11602, max11603, max11604, max11605, max11606, max11607,
	max11608, max11609, max11610, max11611, max11612, max11613,
	max11614, max11615, max11616, max11617, max11644, max11645,
	max11646, max11647) Provides direct access via sysfs and buffered
	data via the iio dev interface.

	To compile this driver as a module, choose M here: the module will be
	called max1363.

	config MCP320X
	tristate "Microchip Technology MCP3x01/02/04/08"
	depends on SPI
	help
	Say yes here to build support for Microchip Technology's
	MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204,
	MCP3208 or MCP3301 analog to digital converter.

	This driver can also be built as a module. If so, the module will be
	called mcp320x.

	config MCP3422
	tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
	depends on I2C
	help
	Say yes here to build support for Microchip Technology's
	MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
	analog to digital converters.

	This driver can also be built as a module. If so, the module will be
	called mcp3422.

	config MEN_Z188_ADC
	tristate "MEN 16z188 ADC IP Core support"
	depends on MCB
	help
	Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB
	carrier.

	This driver can also be built as a module. If so, the module will be
	called men_z188_adc.

	config NAU7802
	tristate "Nuvoton NAU7802 ADC driver"
	depends on I2C
	help
	Say yes here to build support for Nuvoton NAU7802 ADC.

	To compile this driver as a module, choose M here: the
	module will be called nau7802.

	config QCOM_SPMI_IADC
	tristate "Qualcomm SPMI PMIC current ADC"
	depends on SPMI
	select REGMAP_SPMI
	help
	This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.

	The driver supports single mode operation to read from one of two
	channels (external or internal). Hardware have additional
	channels internally used for gain and offset calibration.

	To compile this driver as a module, choose M here: the module will
	be called qcom-spmi-iadc.

	config QCOM_SPMI_VADC
	tristate "Qualcomm SPMI PMIC voltage ADC"
	depends on SPMI
	select REGMAP_SPMI
	help
	This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip.

	The driver supports multiple channels read. The VADC is a 15-bit
	sigma-delta ADC. Some of the channels are internally used for
	calibration.

	To compile this driver as a module, choose M here: the module will
	be called qcom-spmi-vadc.

	config ROCKCHIP_SARADC
	tristate "Rockchip SARADC driver"
	depends on ARCH_ROCKCHIP \|\| (ARM && COMPILE_TEST)
	help
	Say yes here to build support for the SARADC found in SoCs from
	Rockchip.

	To compile this driver as a module, choose M here: the
	module will be called rockchip_saradc.

	config TI_ADC081C
	tristate "Texas Instruments ADC081C021/027"
	depends on I2C
	help
	If you say yes here you get support for Texas Instruments ADC081C021
	and ADC081C027 ADC chips.

	This driver can also be built as a module. If so, the module will be
	called ti-adc081c.

	config TI_ADC128S052
	tristate "Texas Instruments ADC128S052/ADC122S021"
	depends on SPI
	help
	If you say yes here you get support for Texas Instruments ADC128S052
	and ADC122S021 chips.

	This driver can also be built as a module. If so, the module will be
	called ti-adc128s052.

	config TI_AM335X_ADC
	tristate "TI's AM335X ADC driver"
	depends on MFD_TI_AM335X_TSCADC
	select IIO_BUFFER
	select IIO_KFIFO_BUF
	help
	Say yes here to build support for Texas Instruments ADC
	driver which is also a MFD client.

	To compile this driver as a module, choose M here: the module will be
	called ti_am335x_adc.

	config TWL4030_MADC
	tristate "TWL4030 MADC (Monitoring A/D Converter)"
	depends on TWL4030_CORE
	help
	This driver provides support for Triton TWL4030-MADC. The
	driver supports both RT and SW conversion methods.

	This driver can also be built as a module. If so, the module will be
	called twl4030-madc.

	config TWL6030_GPADC
	tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
	depends on TWL4030_CORE
	default n
	help
	Say yes here if you want support for the TWL6030/TWL6032 General
	Purpose A/D Converter. This will add support for battery type
	detection, battery voltage and temperature measurement, die
	temperature measurement, system supply voltage, audio accessory,
	USB ID detection.

	This driver can also be built as a module. If so, the module will be
	called twl6030-gpadc.

	config VF610_ADC
	tristate "Freescale vf610 ADC driver"
	depends on OF
	help
	Say yes here to support for Vybrid board analog-to-digital converter.
	Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX.

	This driver can also be built as a module. If so, the module will be
	called vf610_adc.

	config VIPERBOARD_ADC
	tristate "Viperboard ADC support"
	depends on MFD_VIPERBOARD && USB
	help
	Say yes here to access the ADC part of the Nano River
	Technologies Viperboard.

	To compile this driver as a module, choose M here: the module will be
	called viperboard_adc.

	config XILINX_XADC
	tristate "Xilinx XADC driver"
	depends on ARCH_ZYNQ \|\| MICROBLAZE \|\| COMPILE_TEST
	depends on HAS_IOMEM
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	Say yes here to have support for the Xilinx XADC. The driver does support
	both the ZYNQ interface to the XADC as well as the AXI-XADC interface.

	The driver can also be build as a module. If so, the module will be called
	xilinx-xadc.

	endmenu