blob: a9201eaeb0f1abf9de8cff345ebe036812be46e0 [file] [log] [blame]
/* linux/arch/arm/mach-s3c2410/mach-h1940.c
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.handhelds.org/projects/h1940.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/memblock.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/pda_power.h>
#include <linux/s3c_adc_battery.h>
#include <linux/delay.h>
#include <video/platform_lcd.h>
#include <linux/mmc/host.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-fns.h>
#include <mach/gpio-nrs.h>
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
#include <plat/udc.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/mci.h>
#include <plat/ts.h>
#include <sound/uda1380.h>
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#define H1940_PA_LATCH S3C2410_CS2
#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
.virtual = (unsigned long)H1940_LATCH,
.pfn = __phys_to_pfn(H1940_PA_LATCH),
.length = SZ_16K,
.type = MT_DEVICE
},
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x245,
.ulcon = 0x03,
.ufcon = 0x00,
},
/* IR port */
[2] = {
.hwport = 2,
.flags = 0,
.uart_flags = UPF_CONS_FLOW,
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0x51,
}
};
/* Board control latch control */
static unsigned int latch_state;
static void h1940_latch_control(unsigned int clear, unsigned int set)
{
unsigned long flags;
local_irq_save(flags);
latch_state &= ~clear;
latch_state |= set;
__raw_writel(latch_state, H1940_LATCH);
local_irq_restore(flags);
}
static inline int h1940_gpiolib_to_latch(int offset)
{
return 1 << (offset + 16);
}
static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
unsigned offset, int value)
{
int latch_bit = h1940_gpiolib_to_latch(offset);
h1940_latch_control(value ? 0 : latch_bit,
value ? latch_bit : 0);
}
static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
unsigned offset, int value)
{
h1940_gpiolib_latch_set(chip, offset, value);
return 0;
}
static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
unsigned offset)
{
return (latch_state >> (offset + 16)) & 1;
}
struct gpio_chip h1940_latch_gpiochip = {
.base = H1940_LATCH_GPIO(0),
.owner = THIS_MODULE,
.label = "H1940_LATCH",
.ngpio = 16,
.direction_output = h1940_gpiolib_latch_output,
.set = h1940_gpiolib_latch_set,
.get = h1940_gpiolib_latch_get,
};
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
.vbus_pin = S3C2410_GPG(5),
.vbus_pin_inverted = 1,
.pullup_pin = H1940_LATCH_USB_DP,
};
static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
.cfg_gpio = s3c24xx_ts_cfg_gpio,
};
/**
* Set lcd on or off
**/
static struct s3c2410fb_display h1940_lcd __initdata = {
.lcdcon5= S3C2410_LCDCON5_FRM565 | \
S3C2410_LCDCON5_INVVLINE | \
S3C2410_LCDCON5_HWSWP,
.type = S3C2410_LCDCON1_TFT,
.width = 240,
.height = 320,
.pixclock = 260000,
.xres = 240,
.yres = 320,
.bpp = 16,
.left_margin = 8,
.right_margin = 20,
.hsync_len = 4,
.upper_margin = 8,
.lower_margin = 7,
.vsync_len = 1,
};
static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
.displays = &h1940_lcd,
.num_displays = 1,
.default_display = 0,
.lpcsel = 0x02,
.gpccon = 0xaa940659,
.gpccon_mask = 0xffffc0f0,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaa84aaa0,
.gpdcon_mask = 0xffffffff,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
};
static int power_supply_init(struct device *dev)
{
return gpio_request(S3C2410_GPF(2), "cable plugged");
}
static int h1940_is_ac_online(void)
{
return !gpio_get_value(S3C2410_GPF(2));
}
static void power_supply_exit(struct device *dev)
{
gpio_free(S3C2410_GPF(2));
}
static char *h1940_supplicants[] = {
"main-battery",
"backup-battery",
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = h1940_is_ac_online,
.exit = power_supply_exit,
.supplied_to = h1940_supplicants,
.num_supplicants = ARRAY_SIZE(h1940_supplicants),
};
static struct resource power_supply_resources[] = {
[0] = {
.name = "ac",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
IORESOURCE_IRQ_HIGHEDGE,
.start = IRQ_EINT2,
.end = IRQ_EINT2,
},
};
static struct platform_device power_supply = {
.name = "pda-power",
.id = -1,
.dev = {
.platform_data =
&power_supply_info,
},
.resource = power_supply_resources,
.num_resources = ARRAY_SIZE(power_supply_resources),
};
static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
{ .volt = 4070, .cur = 162, .level = 100},
{ .volt = 4040, .cur = 165, .level = 95},
{ .volt = 4016, .cur = 164, .level = 90},
{ .volt = 3996, .cur = 166, .level = 85},
{ .volt = 3971, .cur = 168, .level = 80},
{ .volt = 3951, .cur = 168, .level = 75},
{ .volt = 3931, .cur = 170, .level = 70},
{ .volt = 3903, .cur = 172, .level = 65},
{ .volt = 3886, .cur = 172, .level = 60},
{ .volt = 3858, .cur = 176, .level = 55},
{ .volt = 3842, .cur = 176, .level = 50},
{ .volt = 3818, .cur = 176, .level = 45},
{ .volt = 3789, .cur = 180, .level = 40},
{ .volt = 3769, .cur = 180, .level = 35},
{ .volt = 3749, .cur = 184, .level = 30},
{ .volt = 3732, .cur = 184, .level = 25},
{ .volt = 3716, .cur = 184, .level = 20},
{ .volt = 3708, .cur = 184, .level = 15},
{ .volt = 3716, .cur = 96, .level = 10},
{ .volt = 3700, .cur = 96, .level = 5},
{ .volt = 3684, .cur = 96, .level = 0},
};
static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
{ .volt = 4130, .cur = 0, .level = 100},
{ .volt = 3982, .cur = 0, .level = 50},
{ .volt = 3854, .cur = 0, .level = 10},
{ .volt = 3841, .cur = 0, .level = 0},
};
int h1940_bat_init(void)
{
int ret;
ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
if (ret)
return ret;
gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
return 0;
}
void h1940_bat_exit(void)
{
gpio_free(H1940_LATCH_SM803_ENABLE);
}
void h1940_enable_charger(void)
{
gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
}
void h1940_disable_charger(void)
{
gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
}
static struct s3c_adc_bat_pdata h1940_bat_cfg = {
.init = h1940_bat_init,
.exit = h1940_bat_exit,
.enable_charger = h1940_enable_charger,
.disable_charger = h1940_disable_charger,
.gpio_charge_finished = S3C2410_GPF(3),
.gpio_inverted = 1,
.lut_noac = bat_lut_noac,
.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
.lut_acin = bat_lut_acin,
.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
.volt_channel = 0,
.current_channel = 1,
.volt_mult = 4056,
.current_mult = 1893,
.internal_impedance = 200,
.backup_volt_channel = 3,
/* TODO Check backup volt multiplier */
.backup_volt_mult = 4056,
.backup_volt_min = 0,
.backup_volt_max = 4149288
};
static struct platform_device h1940_battery = {
.name = "s3c-adc-battery",
.id = -1,
.dev = {
.parent = &s3c_device_adc.dev,
.platform_data = &h1940_bat_cfg,
},
};
DEFINE_SPINLOCK(h1940_blink_spin);
int h1940_led_blink_set(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off)
{
int blink_gpio, check_gpio1, check_gpio2;
switch (gpio) {
case H1940_LATCH_LED_GREEN:
blink_gpio = S3C2410_GPA(7);
check_gpio1 = S3C2410_GPA(1);
check_gpio2 = S3C2410_GPA(3);
break;
case H1940_LATCH_LED_RED:
blink_gpio = S3C2410_GPA(1);
check_gpio1 = S3C2410_GPA(7);
check_gpio2 = S3C2410_GPA(3);
break;
default:
blink_gpio = S3C2410_GPA(3);
check_gpio1 = S3C2410_GPA(1);
check_gpio1 = S3C2410_GPA(7);
break;
}
if (delay_on && delay_off && !*delay_on && !*delay_off)
*delay_on = *delay_off = 500;
spin_lock(&h1940_blink_spin);
switch (state) {
case GPIO_LED_NO_BLINK_LOW:
case GPIO_LED_NO_BLINK_HIGH:
if (!gpio_get_value(check_gpio1) &&
!gpio_get_value(check_gpio2))
gpio_set_value(H1940_LATCH_LED_FLASH, 0);
gpio_set_value(blink_gpio, 0);
if (gpio_is_valid(gpio))
gpio_set_value(gpio, state);
break;
case GPIO_LED_BLINK:
if (gpio_is_valid(gpio))
gpio_set_value(gpio, 0);
gpio_set_value(H1940_LATCH_LED_FLASH, 1);
gpio_set_value(blink_gpio, 1);
break;
}
spin_unlock(&h1940_blink_spin);
return 0;
}
EXPORT_SYMBOL(h1940_led_blink_set);
static struct gpio_led h1940_leds_desc[] = {
{
.name = "Green",
.default_trigger = "main-battery-full",
.gpio = H1940_LATCH_LED_GREEN,
.retain_state_suspended = 1,
},
{
.name = "Red",
.default_trigger
= "main-battery-charging-blink-full-solid",
.gpio = H1940_LATCH_LED_RED,
.retain_state_suspended = 1,
},
};
static struct gpio_led_platform_data h1940_leds_pdata = {
.num_leds = ARRAY_SIZE(h1940_leds_desc),
.leds = h1940_leds_desc,
.gpio_blink_set = h1940_led_blink_set,
};
static struct platform_device h1940_device_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &h1940_leds_pdata,
},
};
static struct platform_device h1940_device_bluetooth = {
.name = "h1940-bt",
.id = -1,
};
static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
switch (power_mode) {
case MMC_POWER_OFF:
gpio_set_value(H1940_LATCH_SD_POWER, 0);
break;
case MMC_POWER_UP:
case MMC_POWER_ON:
gpio_set_value(H1940_LATCH_SD_POWER, 1);
break;
default:
break;
};
}
static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
.gpio_detect = S3C2410_GPF(5),
.gpio_wprotect = S3C2410_GPH(8),
.set_power = h1940_set_mmc_power,
.ocr_avail = MMC_VDD_32_33,
};
static int h1940_backlight_init(struct device *dev)
{
gpio_request(S3C2410_GPB(0), "Backlight");
gpio_direction_output(S3C2410_GPB(0), 0);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
return 0;
}
static int h1940_backlight_notify(struct device *dev, int brightness)
{
if (!brightness) {
gpio_direction_output(S3C2410_GPB(0), 1);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
} else {
gpio_direction_output(S3C2410_GPB(0), 0);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
}
return brightness;
}
static void h1940_backlight_exit(struct device *dev)
{
gpio_direction_output(S3C2410_GPB(0), 1);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
}
static struct platform_pwm_backlight_data backlight_data = {
.pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 50,
/* tcnt = 0x31 */
.pwm_period_ns = 36296,
.init = h1940_backlight_init,
.notify = h1940_backlight_notify,
.exit = h1940_backlight_exit,
};
static struct platform_device h1940_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &s3c_device_timer[0].dev,
.platform_data = &backlight_data,
},
.id = -1,
};
static void h1940_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
int value, retries = 100;
if (!power) {
gpio_set_value(S3C2410_GPC(0), 0);
/* wait for 3ac */
do {
value = gpio_get_value(S3C2410_GPC(6));
} while (value && retries--);
gpio_set_value(H1940_LATCH_LCD_P2, 0);
gpio_set_value(H1940_LATCH_LCD_P3, 0);
gpio_set_value(H1940_LATCH_LCD_P4, 0);
gpio_direction_output(S3C2410_GPC(1), 0);
gpio_direction_output(S3C2410_GPC(4), 0);
gpio_set_value(H1940_LATCH_LCD_P1, 0);
gpio_set_value(H1940_LATCH_LCD_P0, 0);
gpio_set_value(S3C2410_GPC(5), 0);
} else {
gpio_set_value(H1940_LATCH_LCD_P0, 1);
gpio_set_value(H1940_LATCH_LCD_P1, 1);
gpio_direction_input(S3C2410_GPC(1));
gpio_direction_input(S3C2410_GPC(4));
mdelay(10);
s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
gpio_set_value(S3C2410_GPC(5), 1);
gpio_set_value(S3C2410_GPC(0), 1);
gpio_set_value(H1940_LATCH_LCD_P3, 1);
gpio_set_value(H1940_LATCH_LCD_P2, 1);
gpio_set_value(H1940_LATCH_LCD_P4, 1);
}
}
static struct plat_lcd_data h1940_lcd_power_data = {
.set_power = h1940_lcd_power_set,
};
static struct platform_device h1940_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent = &s3c_device_lcd.dev,
.dev.platform_data = &h1940_lcd_power_data,
};
static struct uda1380_platform_data uda1380_info = {
.gpio_power = H1940_LATCH_UDA_POWER,
.gpio_reset = S3C2410_GPA(12),
.dac_clk = UDA1380_DAC_CLK_SYSCLK,
};
static struct i2c_board_info h1940_i2c_devices[] = {
{
I2C_BOARD_INFO("uda1380", 0x1a),
.platform_data = &uda1380_info,
},
};
#define DECLARE_BUTTON(p, k, n, w) \
{ \
.gpio = p, \
.code = k, \
.desc = n, \
.wakeup = w, \
.active_low = 1, \
}
static struct gpio_keys_button h1940_buttons[] = {
DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1),
DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1),
DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0),
DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0),
DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0),
DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0),
DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0),
DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0),
DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0),
DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0),
DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0),
};
static struct gpio_keys_platform_data h1940_buttons_data = {
.buttons = h1940_buttons,
.nbuttons = ARRAY_SIZE(h1940_buttons),
};
static struct platform_device h1940_dev_buttons = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &h1940_buttons_data,
}
};
static struct platform_device *h1940_devices[] __initdata = {
&h1940_dev_buttons,
&s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
&samsung_asoc_dma,
&s3c_device_usbgadget,
&h1940_device_leds,
&h1940_device_bluetooth,
&s3c_device_sdi,
&s3c_device_rtc,
&s3c_device_timer[0],
&h1940_backlight,
&h1940_lcd_powerdev,
&s3c_device_adc,
&s3c_device_ts,
&power_supply,
&h1940_battery,
};
static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
/* setup PM */
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
s3c_pm_init();
/* Add latch gpio chip, set latch initial value */
h1940_latch_control(0, 0);
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
}
/* H1940 and RX3715 need to reserve this for suspend */
static void __init h1940_reserve(void)
{
memblock_reserve(0x30003000, 0x1000);
memblock_reserve(0x30081000, 0x1000);
}
static void __init h1940_init_irq(void)
{
s3c24xx_init_irq();
}
static void __init h1940_init(void)
{
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT)
| (0x02 << S3C24XX_PLL_PDIV_SHIFT)
| (0x03 << S3C24XX_PLL_SDIV_SHIFT);
writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power");
gpio_request(S3C2410_GPC(1), "LCD power");
gpio_request(S3C2410_GPC(4), "LCD power");
gpio_request(S3C2410_GPC(5), "LCD power");
gpio_request(S3C2410_GPC(6), "LCD power");
gpio_request(H1940_LATCH_LCD_P0, "LCD power");
gpio_request(H1940_LATCH_LCD_P1, "LCD power");
gpio_request(H1940_LATCH_LCD_P2, "LCD power");
gpio_request(H1940_LATCH_LCD_P3, "LCD power");
gpio_request(H1940_LATCH_LCD_P4, "LCD power");
gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
gpio_direction_output(S3C2410_GPC(0), 0);
gpio_direction_output(S3C2410_GPC(1), 0);
gpio_direction_output(S3C2410_GPC(4), 0);
gpio_direction_output(S3C2410_GPC(5), 0);
gpio_direction_input(S3C2410_GPC(6));
gpio_direction_output(H1940_LATCH_LCD_P0, 0);
gpio_direction_output(H1940_LATCH_LCD_P1, 0);
gpio_direction_output(H1940_LATCH_LCD_P2, 0);
gpio_direction_output(H1940_LATCH_LCD_P3, 0);
gpio_direction_output(H1940_LATCH_LCD_P4, 0);
gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
gpio_request(H1940_LATCH_SD_POWER, "SD power");
gpio_direction_output(H1940_LATCH_SD_POWER, 0);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
gpio_request(S3C2410_GPA(1), "Red LED blink");
gpio_request(S3C2410_GPA(3), "Blue LED blink");
gpio_request(S3C2410_GPA(7), "Green LED blink");
gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
gpio_direction_output(S3C2410_GPA(1), 0);
gpio_direction_output(S3C2410_GPA(3), 0);
gpio_direction_output(S3C2410_GPA(7), 0);
gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
i2c_register_board_info(0, h1940_i2c_devices,
ARRAY_SIZE(h1940_i2c_devices));
}
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
.timer = &s3c24xx_timer,
MACHINE_END