| /* |
| * adv7604 - Analog Devices ADV7604 video decoder driver |
| * |
| * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| * |
| * This program is free software; you may redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| */ |
| |
| /* |
| * References (c = chapter, p = page): |
| * REF_01 - Analog devices, ADV7604, Register Settings Recommendations, |
| * Revision 2.5, June 2010 |
| * REF_02 - Analog devices, Register map documentation, Documentation of |
| * the register maps, Software manual, Rev. F, June 2010 |
| * REF_03 - Analog devices, ADV7604, Hardware Manual, Rev. F, August 2010 |
| */ |
| |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/videodev2.h> |
| #include <linux/workqueue.h> |
| #include <linux/v4l2-dv-timings.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/adv7604.h> |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "debug level (0-2)"); |
| |
| MODULE_DESCRIPTION("Analog Devices ADV7604 video decoder driver"); |
| MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>"); |
| MODULE_AUTHOR("Mats Randgaard <mats.randgaard@cisco.com>"); |
| MODULE_LICENSE("GPL"); |
| |
| /* ADV7604 system clock frequency */ |
| #define ADV7604_fsc (28636360) |
| |
| #define DIGITAL_INPUT ((state->prim_mode == ADV7604_PRIM_MODE_HDMI_COMP) || \ |
| (state->prim_mode == ADV7604_PRIM_MODE_HDMI_GR)) |
| |
| /* |
| ********************************************************************** |
| * |
| * Arrays with configuration parameters for the ADV7604 |
| * |
| ********************************************************************** |
| */ |
| struct adv7604_state { |
| struct adv7604_platform_data pdata; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler hdl; |
| enum adv7604_prim_mode prim_mode; |
| struct v4l2_dv_timings timings; |
| u8 edid[256]; |
| unsigned edid_blocks; |
| struct v4l2_fract aspect_ratio; |
| u32 rgb_quantization_range; |
| struct workqueue_struct *work_queues; |
| struct delayed_work delayed_work_enable_hotplug; |
| bool connector_hdmi; |
| |
| /* i2c clients */ |
| struct i2c_client *i2c_avlink; |
| struct i2c_client *i2c_cec; |
| struct i2c_client *i2c_infoframe; |
| struct i2c_client *i2c_esdp; |
| struct i2c_client *i2c_dpp; |
| struct i2c_client *i2c_afe; |
| struct i2c_client *i2c_repeater; |
| struct i2c_client *i2c_edid; |
| struct i2c_client *i2c_hdmi; |
| struct i2c_client *i2c_test; |
| struct i2c_client *i2c_cp; |
| struct i2c_client *i2c_vdp; |
| |
| /* controls */ |
| struct v4l2_ctrl *detect_tx_5v_ctrl; |
| struct v4l2_ctrl *analog_sampling_phase_ctrl; |
| struct v4l2_ctrl *free_run_color_manual_ctrl; |
| struct v4l2_ctrl *free_run_color_ctrl; |
| struct v4l2_ctrl *rgb_quantization_range_ctrl; |
| }; |
| |
| /* Supported CEA and DMT timings */ |
| static const struct v4l2_dv_timings adv7604_timings[] = { |
| V4L2_DV_BT_CEA_720X480P59_94, |
| V4L2_DV_BT_CEA_720X576P50, |
| V4L2_DV_BT_CEA_1280X720P24, |
| V4L2_DV_BT_CEA_1280X720P25, |
| V4L2_DV_BT_CEA_1280X720P30, |
| V4L2_DV_BT_CEA_1280X720P50, |
| V4L2_DV_BT_CEA_1280X720P60, |
| V4L2_DV_BT_CEA_1920X1080P24, |
| V4L2_DV_BT_CEA_1920X1080P25, |
| V4L2_DV_BT_CEA_1920X1080P30, |
| V4L2_DV_BT_CEA_1920X1080P50, |
| V4L2_DV_BT_CEA_1920X1080P60, |
| |
| V4L2_DV_BT_DMT_640X350P85, |
| V4L2_DV_BT_DMT_640X400P85, |
| V4L2_DV_BT_DMT_720X400P85, |
| V4L2_DV_BT_DMT_640X480P60, |
| V4L2_DV_BT_DMT_640X480P72, |
| V4L2_DV_BT_DMT_640X480P75, |
| V4L2_DV_BT_DMT_640X480P85, |
| V4L2_DV_BT_DMT_800X600P56, |
| V4L2_DV_BT_DMT_800X600P60, |
| V4L2_DV_BT_DMT_800X600P72, |
| V4L2_DV_BT_DMT_800X600P75, |
| V4L2_DV_BT_DMT_800X600P85, |
| V4L2_DV_BT_DMT_848X480P60, |
| V4L2_DV_BT_DMT_1024X768P60, |
| V4L2_DV_BT_DMT_1024X768P70, |
| V4L2_DV_BT_DMT_1024X768P75, |
| V4L2_DV_BT_DMT_1024X768P85, |
| V4L2_DV_BT_DMT_1152X864P75, |
| V4L2_DV_BT_DMT_1280X768P60_RB, |
| V4L2_DV_BT_DMT_1280X768P60, |
| V4L2_DV_BT_DMT_1280X768P75, |
| V4L2_DV_BT_DMT_1280X768P85, |
| V4L2_DV_BT_DMT_1280X800P60_RB, |
| V4L2_DV_BT_DMT_1280X800P60, |
| V4L2_DV_BT_DMT_1280X800P75, |
| V4L2_DV_BT_DMT_1280X800P85, |
| V4L2_DV_BT_DMT_1280X960P60, |
| V4L2_DV_BT_DMT_1280X960P85, |
| V4L2_DV_BT_DMT_1280X1024P60, |
| V4L2_DV_BT_DMT_1280X1024P75, |
| V4L2_DV_BT_DMT_1280X1024P85, |
| V4L2_DV_BT_DMT_1360X768P60, |
| V4L2_DV_BT_DMT_1400X1050P60_RB, |
| V4L2_DV_BT_DMT_1400X1050P60, |
| V4L2_DV_BT_DMT_1400X1050P75, |
| V4L2_DV_BT_DMT_1400X1050P85, |
| V4L2_DV_BT_DMT_1440X900P60_RB, |
| V4L2_DV_BT_DMT_1440X900P60, |
| V4L2_DV_BT_DMT_1600X1200P60, |
| V4L2_DV_BT_DMT_1680X1050P60_RB, |
| V4L2_DV_BT_DMT_1680X1050P60, |
| V4L2_DV_BT_DMT_1792X1344P60, |
| V4L2_DV_BT_DMT_1856X1392P60, |
| V4L2_DV_BT_DMT_1920X1200P60_RB, |
| V4L2_DV_BT_DMT_1366X768P60, |
| V4L2_DV_BT_DMT_1920X1080P60, |
| { }, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static inline struct adv7604_state *to_state(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct adv7604_state, sd); |
| } |
| |
| static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) |
| { |
| return &container_of(ctrl->handler, struct adv7604_state, hdl)->sd; |
| } |
| |
| static inline unsigned hblanking(const struct v4l2_bt_timings *t) |
| { |
| return t->hfrontporch + t->hsync + t->hbackporch; |
| } |
| |
| static inline unsigned htotal(const struct v4l2_bt_timings *t) |
| { |
| return t->width + t->hfrontporch + t->hsync + t->hbackporch; |
| } |
| |
| static inline unsigned vblanking(const struct v4l2_bt_timings *t) |
| { |
| return t->vfrontporch + t->vsync + t->vbackporch; |
| } |
| |
| static inline unsigned vtotal(const struct v4l2_bt_timings *t) |
| { |
| return t->height + t->vfrontporch + t->vsync + t->vbackporch; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static s32 adv_smbus_read_byte_data_check(struct i2c_client *client, |
| u8 command, bool check) |
| { |
| union i2c_smbus_data data; |
| |
| if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags, |
| I2C_SMBUS_READ, command, |
| I2C_SMBUS_BYTE_DATA, &data)) |
| return data.byte; |
| if (check) |
| v4l_err(client, "error reading %02x, %02x\n", |
| client->addr, command); |
| return -EIO; |
| } |
| |
| static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command) |
| { |
| return adv_smbus_read_byte_data_check(client, command, true); |
| } |
| |
| static s32 adv_smbus_write_byte_data(struct i2c_client *client, |
| u8 command, u8 value) |
| { |
| union i2c_smbus_data data; |
| int err; |
| int i; |
| |
| data.byte = value; |
| for (i = 0; i < 3; i++) { |
| err = i2c_smbus_xfer(client->adapter, client->addr, |
| client->flags, |
| I2C_SMBUS_WRITE, command, |
| I2C_SMBUS_BYTE_DATA, &data); |
| if (!err) |
| break; |
| } |
| if (err < 0) |
| v4l_err(client, "error writing %02x, %02x, %02x\n", |
| client->addr, command, value); |
| return err; |
| } |
| |
| static s32 adv_smbus_write_i2c_block_data(struct i2c_client *client, |
| u8 command, unsigned length, const u8 *values) |
| { |
| union i2c_smbus_data data; |
| |
| if (length > I2C_SMBUS_BLOCK_MAX) |
| length = I2C_SMBUS_BLOCK_MAX; |
| data.block[0] = length; |
| memcpy(data.block + 1, values, length); |
| return i2c_smbus_xfer(client->adapter, client->addr, client->flags, |
| I2C_SMBUS_WRITE, command, |
| I2C_SMBUS_I2C_BLOCK_DATA, &data); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static inline int io_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return adv_smbus_read_byte_data(client, reg); |
| } |
| |
| static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return adv_smbus_write_byte_data(client, reg, val); |
| } |
| |
| static inline int io_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) |
| { |
| return io_write(sd, reg, (io_read(sd, reg) & mask) | val); |
| } |
| |
| static inline int avlink_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_avlink, reg); |
| } |
| |
| static inline int avlink_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_avlink, reg, val); |
| } |
| |
| static inline int cec_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_cec, reg); |
| } |
| |
| static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_cec, reg, val); |
| } |
| |
| static inline int cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) |
| { |
| return cec_write(sd, reg, (cec_read(sd, reg) & mask) | val); |
| } |
| |
| static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_infoframe, reg); |
| } |
| |
| static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_infoframe, reg, val); |
| } |
| |
| static inline int esdp_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_esdp, reg); |
| } |
| |
| static inline int esdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_esdp, reg, val); |
| } |
| |
| static inline int dpp_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_dpp, reg); |
| } |
| |
| static inline int dpp_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_dpp, reg, val); |
| } |
| |
| static inline int afe_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_afe, reg); |
| } |
| |
| static inline int afe_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_afe, reg, val); |
| } |
| |
| static inline int rep_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_repeater, reg); |
| } |
| |
| static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_repeater, reg, val); |
| } |
| |
| static inline int rep_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) |
| { |
| return rep_write(sd, reg, (rep_read(sd, reg) & mask) | val); |
| } |
| |
| static inline int edid_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_edid, reg); |
| } |
| |
| static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_edid, reg, val); |
| } |
| |
| static inline int edid_read_block(struct v4l2_subdev *sd, unsigned len, u8 *val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| struct i2c_client *client = state->i2c_edid; |
| u8 msgbuf0[1] = { 0 }; |
| u8 msgbuf1[256]; |
| struct i2c_msg msg[2] = { { client->addr, 0, 1, msgbuf0 }, |
| { client->addr, 0 | I2C_M_RD, len, msgbuf1 } |
| }; |
| |
| if (i2c_transfer(client->adapter, msg, 2) < 0) |
| return -EIO; |
| memcpy(val, msgbuf1, len); |
| return 0; |
| } |
| |
| static void adv7604_delayed_work_enable_hotplug(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct adv7604_state *state = container_of(dwork, struct adv7604_state, |
| delayed_work_enable_hotplug); |
| struct v4l2_subdev *sd = &state->sd; |
| |
| v4l2_dbg(2, debug, sd, "%s: enable hotplug\n", __func__); |
| |
| v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)1); |
| } |
| |
| static inline int edid_write_block(struct v4l2_subdev *sd, |
| unsigned len, const u8 *val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct adv7604_state *state = to_state(sd); |
| int err = 0; |
| int i; |
| |
| v4l2_dbg(2, debug, sd, "%s: write EDID block (%d byte)\n", __func__, len); |
| |
| v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); |
| |
| /* Disables I2C access to internal EDID ram from DDC port */ |
| rep_write_and_or(sd, 0x77, 0xf0, 0x0); |
| |
| for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX) |
| err = adv_smbus_write_i2c_block_data(state->i2c_edid, i, |
| I2C_SMBUS_BLOCK_MAX, val + i); |
| if (err) |
| return err; |
| |
| /* adv7604 calculates the checksums and enables I2C access to internal |
| EDID ram from DDC port. */ |
| rep_write_and_or(sd, 0x77, 0xf0, 0x1); |
| |
| for (i = 0; i < 1000; i++) { |
| if (rep_read(sd, 0x7d) & 1) |
| break; |
| mdelay(1); |
| } |
| if (i == 1000) { |
| v4l_err(client, "error enabling edid\n"); |
| return -EIO; |
| } |
| |
| /* enable hotplug after 100 ms */ |
| queue_delayed_work(state->work_queues, |
| &state->delayed_work_enable_hotplug, HZ / 10); |
| return 0; |
| } |
| |
| static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_hdmi, reg); |
| } |
| |
| static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_hdmi, reg, val); |
| } |
| |
| static inline int test_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_test, reg); |
| } |
| |
| static inline int test_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_test, reg, val); |
| } |
| |
| static inline int cp_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_cp, reg); |
| } |
| |
| static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_cp, reg, val); |
| } |
| |
| static inline int cp_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) |
| { |
| return cp_write(sd, reg, (cp_read(sd, reg) & mask) | val); |
| } |
| |
| static inline int vdp_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_vdp, reg); |
| } |
| |
| static inline int vdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| return adv_smbus_write_byte_data(state->i2c_vdp, reg, val); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static void adv7604_inv_register(struct v4l2_subdev *sd) |
| { |
| v4l2_info(sd, "0x000-0x0ff: IO Map\n"); |
| v4l2_info(sd, "0x100-0x1ff: AVLink Map\n"); |
| v4l2_info(sd, "0x200-0x2ff: CEC Map\n"); |
| v4l2_info(sd, "0x300-0x3ff: InfoFrame Map\n"); |
| v4l2_info(sd, "0x400-0x4ff: ESDP Map\n"); |
| v4l2_info(sd, "0x500-0x5ff: DPP Map\n"); |
| v4l2_info(sd, "0x600-0x6ff: AFE Map\n"); |
| v4l2_info(sd, "0x700-0x7ff: Repeater Map\n"); |
| v4l2_info(sd, "0x800-0x8ff: EDID Map\n"); |
| v4l2_info(sd, "0x900-0x9ff: HDMI Map\n"); |
| v4l2_info(sd, "0xa00-0xaff: Test Map\n"); |
| v4l2_info(sd, "0xb00-0xbff: CP Map\n"); |
| v4l2_info(sd, "0xc00-0xcff: VDP Map\n"); |
| } |
| |
| static int adv7604_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (!v4l2_chip_match_i2c_client(client, ®->match)) |
| return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| reg->size = 1; |
| switch (reg->reg >> 8) { |
| case 0: |
| reg->val = io_read(sd, reg->reg & 0xff); |
| break; |
| case 1: |
| reg->val = avlink_read(sd, reg->reg & 0xff); |
| break; |
| case 2: |
| reg->val = cec_read(sd, reg->reg & 0xff); |
| break; |
| case 3: |
| reg->val = infoframe_read(sd, reg->reg & 0xff); |
| break; |
| case 4: |
| reg->val = esdp_read(sd, reg->reg & 0xff); |
| break; |
| case 5: |
| reg->val = dpp_read(sd, reg->reg & 0xff); |
| break; |
| case 6: |
| reg->val = afe_read(sd, reg->reg & 0xff); |
| break; |
| case 7: |
| reg->val = rep_read(sd, reg->reg & 0xff); |
| break; |
| case 8: |
| reg->val = edid_read(sd, reg->reg & 0xff); |
| break; |
| case 9: |
| reg->val = hdmi_read(sd, reg->reg & 0xff); |
| break; |
| case 0xa: |
| reg->val = test_read(sd, reg->reg & 0xff); |
| break; |
| case 0xb: |
| reg->val = cp_read(sd, reg->reg & 0xff); |
| break; |
| case 0xc: |
| reg->val = vdp_read(sd, reg->reg & 0xff); |
| break; |
| default: |
| v4l2_info(sd, "Register %03llx not supported\n", reg->reg); |
| adv7604_inv_register(sd); |
| break; |
| } |
| return 0; |
| } |
| |
| static int adv7604_s_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (!v4l2_chip_match_i2c_client(client, ®->match)) |
| return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| switch (reg->reg >> 8) { |
| case 0: |
| io_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 1: |
| avlink_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 2: |
| cec_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 3: |
| infoframe_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 4: |
| esdp_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 5: |
| dpp_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 6: |
| afe_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 7: |
| rep_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 8: |
| edid_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 9: |
| hdmi_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 0xa: |
| test_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 0xb: |
| cp_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 0xc: |
| vdp_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| default: |
| v4l2_info(sd, "Register %03llx not supported\n", reg->reg); |
| adv7604_inv_register(sd); |
| break; |
| } |
| return 0; |
| } |
| #endif |
| |
| static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| /* port A only */ |
| return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, |
| ((io_read(sd, 0x6f) & 0x10) >> 4)); |
| } |
| |
| static void configure_free_run(struct v4l2_subdev *sd, const struct v4l2_bt_timings *timings) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| u32 width = htotal(timings); |
| u32 height = vtotal(timings); |
| u16 ch1_fr_ll = (((u32)timings->pixelclock / 100) > 0) ? |
| ((width * (ADV7604_fsc / 100)) / ((u32)timings->pixelclock / 100)) : 0; |
| |
| v4l2_dbg(2, debug, sd, "%s\n", __func__); |
| |
| cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); /* CH1_FR_LL */ |
| cp_write(sd, 0x90, ch1_fr_ll & 0xff); /* CH1_FR_LL */ |
| cp_write(sd, 0xab, (height >> 4) & 0xff); /* CP_LCOUNT_MAX */ |
| cp_write(sd, 0xac, (height & 0x0f) << 4); /* CP_LCOUNT_MAX */ |
| /* TODO support interlaced */ |
| cp_write(sd, 0x91, 0x10); /* INTERLACED */ |
| |
| /* Should only be set in auto-graphics mode [REF_02 p. 91-92] */ |
| if ((io_read(sd, 0x00) == 0x07) && (io_read(sd, 0x01) == 0x02)) { |
| u16 cp_start_sav, cp_start_eav, cp_start_vbi, cp_end_vbi; |
| const u8 pll[2] = { |
| (0xc0 | ((width >> 8) & 0x1f)), |
| (width & 0xff) |
| }; |
| |
| /* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */ |
| /* IO-map reg. 0x16 and 0x17 should be written in sequence */ |
| if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) { |
| v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n"); |
| return; |
| } |
| |
| /* active video - horizontal timing */ |
| cp_start_sav = timings->hsync + timings->hbackporch - 4; |
| cp_start_eav = width - timings->hfrontporch; |
| cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff); |
| cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | ((cp_start_eav >> 8) & 0x0f)); |
| cp_write(sd, 0xa4, cp_start_eav & 0xff); |
| |
| /* active video - vertical timing */ |
| cp_start_vbi = height - timings->vfrontporch; |
| cp_end_vbi = timings->vsync + timings->vbackporch; |
| cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff); |
| cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | ((cp_end_vbi >> 8) & 0xf)); |
| cp_write(sd, 0xa7, cp_end_vbi & 0xff); |
| } else { |
| /* reset to default values */ |
| io_write(sd, 0x16, 0x43); |
| io_write(sd, 0x17, 0x5a); |
| cp_write(sd, 0xa2, 0x00); |
| cp_write(sd, 0xa3, 0x00); |
| cp_write(sd, 0xa4, 0x00); |
| cp_write(sd, 0xa5, 0x00); |
| cp_write(sd, 0xa6, 0x00); |
| cp_write(sd, 0xa7, 0x00); |
| } |
| } |
| |
| |
| static void set_rgb_quantization_range(struct v4l2_subdev *sd) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| switch (state->rgb_quantization_range) { |
| case V4L2_DV_RGB_RANGE_AUTO: |
| /* automatic */ |
| if ((hdmi_read(sd, 0x05) & 0x80) || |
| (state->prim_mode == ADV7604_PRIM_MODE_COMP) || |
| (state->prim_mode == ADV7604_PRIM_MODE_RGB)) { |
| /* receiving HDMI or analog signal */ |
| io_write_and_or(sd, 0x02, 0x0f, 0xf0); |
| } else { |
| /* receiving DVI-D signal */ |
| |
| /* ADV7604 selects RGB limited range regardless of |
| input format (CE/IT) in automatic mode */ |
| if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { |
| /* RGB limited range (16-235) */ |
| io_write_and_or(sd, 0x02, 0x0f, 0x00); |
| |
| } else { |
| /* RGB full range (0-255) */ |
| io_write_and_or(sd, 0x02, 0x0f, 0x10); |
| } |
| } |
| break; |
| case V4L2_DV_RGB_RANGE_LIMITED: |
| /* RGB limited range (16-235) */ |
| io_write_and_or(sd, 0x02, 0x0f, 0x00); |
| break; |
| case V4L2_DV_RGB_RANGE_FULL: |
| /* RGB full range (0-255) */ |
| io_write_and_or(sd, 0x02, 0x0f, 0x10); |
| break; |
| } |
| } |
| |
| |
| static int adv7604_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct v4l2_subdev *sd = to_sd(ctrl); |
| struct adv7604_state *state = to_state(sd); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| cp_write(sd, 0x3c, ctrl->val); |
| return 0; |
| case V4L2_CID_CONTRAST: |
| cp_write(sd, 0x3a, ctrl->val); |
| return 0; |
| case V4L2_CID_SATURATION: |
| cp_write(sd, 0x3b, ctrl->val); |
| return 0; |
| case V4L2_CID_HUE: |
| cp_write(sd, 0x3d, ctrl->val); |
| return 0; |
| case V4L2_CID_DV_RX_RGB_RANGE: |
| state->rgb_quantization_range = ctrl->val; |
| set_rgb_quantization_range(sd); |
| return 0; |
| case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE: |
| /* Set the analog sampling phase. This is needed to find the |
| best sampling phase for analog video: an application or |
| driver has to try a number of phases and analyze the picture |
| quality before settling on the best performing phase. */ |
| afe_write(sd, 0xc8, ctrl->val); |
| return 0; |
| case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL: |
| /* Use the default blue color for free running mode, |
| or supply your own. */ |
| cp_write_and_or(sd, 0xbf, ~0x04, (ctrl->val << 2)); |
| return 0; |
| case V4L2_CID_ADV_RX_FREE_RUN_COLOR: |
| cp_write(sd, 0xc0, (ctrl->val & 0xff0000) >> 16); |
| cp_write(sd, 0xc1, (ctrl->val & 0x00ff00) >> 8); |
| cp_write(sd, 0xc2, (u8)(ctrl->val & 0x0000ff)); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int adv7604_g_chip_ident(struct v4l2_subdev *sd, |
| struct v4l2_dbg_chip_ident *chip) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7604, 0); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static inline bool no_power(struct v4l2_subdev *sd) |
| { |
| /* Entire chip or CP powered off */ |
| return io_read(sd, 0x0c) & 0x24; |
| } |
| |
| static inline bool no_signal_tmds(struct v4l2_subdev *sd) |
| { |
| /* TODO port B, C and D */ |
| return !(io_read(sd, 0x6a) & 0x10); |
| } |
| |
| static inline bool no_lock_tmds(struct v4l2_subdev *sd) |
| { |
| return (io_read(sd, 0x6a) & 0xe0) != 0xe0; |
| } |
| |
| static inline bool no_lock_sspd(struct v4l2_subdev *sd) |
| { |
| /* TODO channel 2 */ |
| return ((cp_read(sd, 0xb5) & 0xd0) != 0xd0); |
| } |
| |
| static inline bool no_lock_stdi(struct v4l2_subdev *sd) |
| { |
| /* TODO channel 2 */ |
| return !(cp_read(sd, 0xb1) & 0x80); |
| } |
| |
| static inline bool no_signal(struct v4l2_subdev *sd) |
| { |
| struct adv7604_state *state = to_state(sd); |
| bool ret; |
| |
| ret = no_power(sd); |
| |
| ret |= no_lock_stdi(sd); |
| ret |= no_lock_sspd(sd); |
| |
| if (DIGITAL_INPUT) { |
| ret |= no_lock_tmds(sd); |
| ret |= no_signal_tmds(sd); |
| } |
| |
| return ret; |
| } |
| |
| static inline bool no_lock_cp(struct v4l2_subdev *sd) |
| { |
| /* CP has detected a non standard number of lines on the incoming |
| video compared to what it is configured to receive by s_dv_timings */ |
| return io_read(sd, 0x12) & 0x01; |
| } |
| |
| static int adv7604_g_input_status(struct v4l2_subdev *sd, u32 *status) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| *status = 0; |
| *status |= no_power(sd) ? V4L2_IN_ST_NO_POWER : 0; |
| *status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0; |
| if (no_lock_cp(sd)) |
| *status |= DIGITAL_INPUT ? V4L2_IN_ST_NO_SYNC : V4L2_IN_ST_NO_H_LOCK; |
| |
| v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status); |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static void adv7604_print_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings, const char *txt, bool detailed) |
| { |
| struct v4l2_bt_timings *bt = &timings->bt; |
| u32 htot, vtot; |
| |
| if (timings->type != V4L2_DV_BT_656_1120) |
| return; |
| |
| htot = htotal(bt); |
| vtot = vtotal(bt); |
| |
| v4l2_info(sd, "%s %dx%d%s%d (%dx%d)", |
| txt, bt->width, bt->height, bt->interlaced ? "i" : "p", |
| (htot * vtot) > 0 ? ((u32)bt->pixelclock / |
| (htot * vtot)) : 0, |
| htot, vtot); |
| |
| if (detailed) { |
| v4l2_info(sd, " horizontal: fp = %d, %ssync = %d, bp = %d\n", |
| bt->hfrontporch, |
| (bt->polarities & V4L2_DV_HSYNC_POS_POL) ? "+" : "-", |
| bt->hsync, bt->hbackporch); |
| v4l2_info(sd, " vertical: fp = %d, %ssync = %d, bp = %d\n", |
| bt->vfrontporch, |
| (bt->polarities & V4L2_DV_VSYNC_POS_POL) ? "+" : "-", |
| bt->vsync, bt->vbackporch); |
| v4l2_info(sd, " pixelclock: %lld, flags: 0x%x, standards: 0x%x\n", |
| bt->pixelclock, bt->flags, bt->standards); |
| } |
| } |
| |
| struct stdi_readback { |
| u16 bl, lcf, lcvs; |
| u8 hs_pol, vs_pol; |
| bool interlaced; |
| }; |
| |
| static int stdi2dv_timings(struct v4l2_subdev *sd, |
| struct stdi_readback *stdi, |
| struct v4l2_dv_timings *timings) |
| { |
| struct adv7604_state *state = to_state(sd); |
| u32 hfreq = (ADV7604_fsc * 8) / stdi->bl; |
| u32 pix_clk; |
| int i; |
| |
| for (i = 0; adv7604_timings[i].bt.height; i++) { |
| if (vtotal(&adv7604_timings[i].bt) != stdi->lcf + 1) |
| continue; |
| if (adv7604_timings[i].bt.vsync != stdi->lcvs) |
| continue; |
| |
| pix_clk = hfreq * htotal(&adv7604_timings[i].bt); |
| |
| if ((pix_clk < adv7604_timings[i].bt.pixelclock + 1000000) && |
| (pix_clk > adv7604_timings[i].bt.pixelclock - 1000000)) { |
| *timings = adv7604_timings[i]; |
| return 0; |
| } |
| } |
| |
| if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs, |
| (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | |
| (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), |
| timings)) |
| return 0; |
| if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs, |
| (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | |
| (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), |
| state->aspect_ratio, timings)) |
| return 0; |
| |
| v4l2_dbg(2, debug, sd, "%s: No format candidate found for lcf=%d, bl = %d\n", |
| __func__, stdi->lcf, stdi->bl); |
| return -1; |
| } |
| |
| static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi) |
| { |
| if (no_lock_stdi(sd) || no_lock_sspd(sd)) { |
| v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n", __func__); |
| return -1; |
| } |
| |
| /* read STDI */ |
| stdi->bl = ((cp_read(sd, 0xb1) & 0x3f) << 8) | cp_read(sd, 0xb2); |
| stdi->lcf = ((cp_read(sd, 0xb3) & 0x7) << 8) | cp_read(sd, 0xb4); |
| stdi->lcvs = cp_read(sd, 0xb3) >> 3; |
| stdi->interlaced = io_read(sd, 0x12) & 0x10; |
| |
| /* read SSPD */ |
| if ((cp_read(sd, 0xb5) & 0x03) == 0x01) { |
| stdi->hs_pol = ((cp_read(sd, 0xb5) & 0x10) ? |
| ((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x'); |
| stdi->vs_pol = ((cp_read(sd, 0xb5) & 0x40) ? |
| ((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x'); |
| } else { |
| stdi->hs_pol = 'x'; |
| stdi->vs_pol = 'x'; |
| } |
| |
| if (no_lock_stdi(sd) || no_lock_sspd(sd)) { |
| v4l2_dbg(2, debug, sd, |
| "%s: signal lost during readout of STDI/SSPD\n", __func__); |
| return -1; |
| } |
| |
| if (stdi->lcf < 239 || stdi->bl < 8 || stdi->bl == 0x3fff) { |
| v4l2_dbg(2, debug, sd, "%s: invalid signal\n", __func__); |
| memset(stdi, 0, sizeof(struct stdi_readback)); |
| return -1; |
| } |
| |
| v4l2_dbg(2, debug, sd, |
| "%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n", |
| __func__, stdi->lcf, stdi->bl, stdi->lcvs, |
| stdi->hs_pol, stdi->vs_pol, |
| stdi->interlaced ? "interlaced" : "progressive"); |
| |
| return 0; |
| } |
| |
| static int adv7604_enum_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_enum_dv_timings *timings) |
| { |
| if (timings->index >= ARRAY_SIZE(adv7604_timings) - 1) |
| return -EINVAL; |
| memset(timings->reserved, 0, sizeof(timings->reserved)); |
| timings->timings = adv7604_timings[timings->index]; |
| return 0; |
| } |
| |
| static int adv7604_dv_timings_cap(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings_cap *cap) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| cap->type = V4L2_DV_BT_656_1120; |
| cap->bt.max_width = 1920; |
| cap->bt.max_height = 1200; |
| cap->bt.min_pixelclock = 27000000; |
| if (DIGITAL_INPUT) |
| cap->bt.max_pixelclock = 225000000; |
| else |
| cap->bt.max_pixelclock = 170000000; |
| cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | |
| V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT; |
| cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | |
| V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM; |
| return 0; |
| } |
| |
| /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings |
| if the format is listed in adv7604_timings[] */ |
| static void adv7604_fill_optional_dv_timings_fields(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct adv7604_state *state = to_state(sd); |
| int i; |
| |
| for (i = 0; adv7604_timings[i].bt.width; i++) { |
| if (v4l_match_dv_timings(timings, &adv7604_timings[i], |
| DIGITAL_INPUT ? 250000 : 1000000)) { |
| *timings = adv7604_timings[i]; |
| break; |
| } |
| } |
| } |
| |
| static int adv7604_query_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct adv7604_state *state = to_state(sd); |
| struct v4l2_bt_timings *bt = &timings->bt; |
| struct stdi_readback stdi; |
| |
| if (!timings) |
| return -EINVAL; |
| |
| memset(timings, 0, sizeof(struct v4l2_dv_timings)); |
| |
| if (no_signal(sd)) { |
| v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__); |
| return -ENOLINK; |
| } |
| |
| /* read STDI */ |
| if (read_stdi(sd, &stdi)) { |
| v4l2_dbg(1, debug, sd, "%s: STDI/SSPD not locked\n", __func__); |
| return -ENOLINK; |
| } |
| bt->interlaced = stdi.interlaced ? |
| V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE; |
| |
| if (DIGITAL_INPUT) { |
| timings->type = V4L2_DV_BT_656_1120; |
| |
| bt->width = (hdmi_read(sd, 0x07) & 0x0f) * 256 + hdmi_read(sd, 0x08); |
| bt->height = (hdmi_read(sd, 0x09) & 0x0f) * 256 + hdmi_read(sd, 0x0a); |
| bt->pixelclock = (hdmi_read(sd, 0x06) * 1000000) + |
| ((hdmi_read(sd, 0x3b) & 0x30) >> 4) * 250000; |
| bt->hfrontporch = (hdmi_read(sd, 0x20) & 0x03) * 256 + |
| hdmi_read(sd, 0x21); |
| bt->hsync = (hdmi_read(sd, 0x22) & 0x03) * 256 + |
| hdmi_read(sd, 0x23); |
| bt->hbackporch = (hdmi_read(sd, 0x24) & 0x03) * 256 + |
| hdmi_read(sd, 0x25); |
| bt->vfrontporch = ((hdmi_read(sd, 0x2a) & 0x1f) * 256 + |
| hdmi_read(sd, 0x2b)) / 2; |
| bt->vsync = ((hdmi_read(sd, 0x2e) & 0x1f) * 256 + |
| hdmi_read(sd, 0x2f)) / 2; |
| bt->vbackporch = ((hdmi_read(sd, 0x32) & 0x1f) * 256 + |
| hdmi_read(sd, 0x33)) / 2; |
| bt->polarities = ((hdmi_read(sd, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL : 0) | |
| ((hdmi_read(sd, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL : 0); |
| if (bt->interlaced == V4L2_DV_INTERLACED) { |
| bt->height += (hdmi_read(sd, 0x0b) & 0x0f) * 256 + |
| hdmi_read(sd, 0x0c); |
| bt->il_vfrontporch = ((hdmi_read(sd, 0x2c) & 0x1f) * 256 + |
| hdmi_read(sd, 0x2d)) / 2; |
| bt->il_vsync = ((hdmi_read(sd, 0x30) & 0x1f) * 256 + |
| hdmi_read(sd, 0x31)) / 2; |
| bt->vbackporch = ((hdmi_read(sd, 0x34) & 0x1f) * 256 + |
| hdmi_read(sd, 0x35)) / 2; |
| } |
| adv7604_fill_optional_dv_timings_fields(sd, timings); |
| } else { |
| /* find format |
| * Since LCVS values are inaccurate (REF_03, page 275-276), |
| * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails. |
| */ |
| if (!stdi2dv_timings(sd, &stdi, timings)) |
| goto found; |
| stdi.lcvs += 1; |
| v4l2_dbg(1, debug, sd, "%s: lcvs + 1 = %d\n", __func__, stdi.lcvs); |
| if (!stdi2dv_timings(sd, &stdi, timings)) |
| goto found; |
| stdi.lcvs -= 2; |
| v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs); |
| if (stdi2dv_timings(sd, &stdi, timings)) { |
| v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__); |
| return -ERANGE; |
| } |
| } |
| found: |
| |
| if (no_signal(sd)) { |
| v4l2_dbg(1, debug, sd, "%s: signal lost during readout\n", __func__); |
| memset(timings, 0, sizeof(struct v4l2_dv_timings)); |
| return -ENOLINK; |
| } |
| |
| if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || |
| (DIGITAL_INPUT && bt->pixelclock > 225000000)) { |
| v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", |
| __func__, (u32)bt->pixelclock); |
| return -ERANGE; |
| } |
| |
| if (debug > 1) |
| adv7604_print_timings(sd, timings, |
| "adv7604_query_dv_timings:", true); |
| |
| return 0; |
| } |
| |
| static int adv7604_s_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct adv7604_state *state = to_state(sd); |
| struct v4l2_bt_timings *bt; |
| |
| if (!timings) |
| return -EINVAL; |
| |
| bt = &timings->bt; |
| |
| if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || |
| (DIGITAL_INPUT && bt->pixelclock > 225000000)) { |
| v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", |
| __func__, (u32)bt->pixelclock); |
| return -ERANGE; |
| } |
| adv7604_fill_optional_dv_timings_fields(sd, timings); |
| |
| state->timings = *timings; |
| |
| /* freerun */ |
| configure_free_run(sd, bt); |
| |
| set_rgb_quantization_range(sd); |
| |
| |
| if (debug > 1) |
| adv7604_print_timings(sd, timings, |
| "adv7604_s_dv_timings:", true); |
| return 0; |
| } |
| |
| static int adv7604_g_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| *timings = state->timings; |
| return 0; |
| } |
| |
| static void enable_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) |
| { |
| switch (prim_mode) { |
| case ADV7604_PRIM_MODE_COMP: |
| case ADV7604_PRIM_MODE_RGB: |
| /* enable */ |
| io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */ |
| break; |
| case ADV7604_PRIM_MODE_HDMI_COMP: |
| case ADV7604_PRIM_MODE_HDMI_GR: |
| /* enable */ |
| hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */ |
| hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */ |
| io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */ |
| break; |
| default: |
| v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", |
| __func__, prim_mode); |
| break; |
| } |
| } |
| |
| static void disable_input(struct v4l2_subdev *sd) |
| { |
| /* disable */ |
| io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */ |
| hdmi_write(sd, 0x1a, 0x1a); /* Mute audio */ |
| hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */ |
| } |
| |
| static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) |
| { |
| switch (prim_mode) { |
| case ADV7604_PRIM_MODE_COMP: |
| case ADV7604_PRIM_MODE_RGB: |
| /* set mode and select free run resolution */ |
| io_write(sd, 0x00, 0x07); /* video std */ |
| io_write(sd, 0x01, 0x02); /* prim mode */ |
| /* enable embedded syncs for auto graphics mode */ |
| cp_write_and_or(sd, 0x81, 0xef, 0x10); |
| |
| /* reset ADI recommended settings for HDMI: */ |
| /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ |
| hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */ |
| hdmi_write(sd, 0x3d, 0x00); /* DDC bus active pull-up control */ |
| hdmi_write(sd, 0x3e, 0x74); /* TMDS PLL optimization */ |
| hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ |
| hdmi_write(sd, 0x57, 0x74); /* TMDS PLL optimization */ |
| hdmi_write(sd, 0x58, 0x63); /* TMDS PLL optimization */ |
| hdmi_write(sd, 0x8d, 0x18); /* equaliser */ |
| hdmi_write(sd, 0x8e, 0x34); /* equaliser */ |
| hdmi_write(sd, 0x93, 0x88); /* equaliser */ |
| hdmi_write(sd, 0x94, 0x2e); /* equaliser */ |
| hdmi_write(sd, 0x96, 0x00); /* enable automatic EQ changing */ |
| |
| afe_write(sd, 0x00, 0x08); /* power up ADC */ |
| afe_write(sd, 0x01, 0x06); /* power up Analog Front End */ |
| afe_write(sd, 0xc8, 0x00); /* phase control */ |
| |
| /* set ADI recommended settings for digitizer */ |
| /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ |
| afe_write(sd, 0x12, 0x7b); /* ADC noise shaping filter controls */ |
| afe_write(sd, 0x0c, 0x1f); /* CP core gain controls */ |
| cp_write(sd, 0x3e, 0x04); /* CP core pre-gain control */ |
| cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ |
| cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */ |
| break; |
| |
| case ADV7604_PRIM_MODE_HDMI_COMP: |
| case ADV7604_PRIM_MODE_HDMI_GR: |
| /* set mode and select free run resolution */ |
| /* video std */ |
| io_write(sd, 0x00, |
| (prim_mode == ADV7604_PRIM_MODE_HDMI_GR) ? 0x02 : 0x1e); |
| io_write(sd, 0x01, prim_mode); /* prim mode */ |
| /* disable embedded syncs for auto graphics mode */ |
| cp_write_and_or(sd, 0x81, 0xef, 0x00); |
| |
| /* set ADI recommended settings for HDMI: */ |
| /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ |
| hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */ |
| hdmi_write(sd, 0x3d, 0x10); /* DDC bus active pull-up control */ |
| hdmi_write(sd, 0x3e, 0x39); /* TMDS PLL optimization */ |
| hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ |
| hdmi_write(sd, 0x57, 0xb6); /* TMDS PLL optimization */ |
| hdmi_write(sd, 0x58, 0x03); /* TMDS PLL optimization */ |
| hdmi_write(sd, 0x8d, 0x18); /* equaliser */ |
| hdmi_write(sd, 0x8e, 0x34); /* equaliser */ |
| hdmi_write(sd, 0x93, 0x8b); /* equaliser */ |
| hdmi_write(sd, 0x94, 0x2d); /* equaliser */ |
| hdmi_write(sd, 0x96, 0x01); /* enable automatic EQ changing */ |
| |
| afe_write(sd, 0x00, 0xff); /* power down ADC */ |
| afe_write(sd, 0x01, 0xfe); /* power down Analog Front End */ |
| afe_write(sd, 0xc8, 0x40); /* phase control */ |
| |
| /* reset ADI recommended settings for digitizer */ |
| /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ |
| afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */ |
| afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */ |
| cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */ |
| cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ |
| cp_write(sd, 0x40, 0x80); /* CP core pre-gain control. Graphics mode */ |
| |
| break; |
| default: |
| v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", __func__, prim_mode); |
| break; |
| } |
| } |
| |
| static int adv7604_s_routing(struct v4l2_subdev *sd, |
| u32 input, u32 output, u32 config) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input); |
| |
| switch (input) { |
| case 0: |
| /* TODO select HDMI_COMP or HDMI_GR */ |
| state->prim_mode = ADV7604_PRIM_MODE_HDMI_COMP; |
| break; |
| case 1: |
| state->prim_mode = ADV7604_PRIM_MODE_RGB; |
| break; |
| case 2: |
| state->prim_mode = ADV7604_PRIM_MODE_COMP; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| disable_input(sd); |
| |
| select_input(sd, state->prim_mode); |
| |
| enable_input(sd, state->prim_mode); |
| |
| return 0; |
| } |
| |
| static int adv7604_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, |
| enum v4l2_mbus_pixelcode *code) |
| { |
| if (index) |
| return -EINVAL; |
| /* Good enough for now */ |
| *code = V4L2_MBUS_FMT_FIXED; |
| return 0; |
| } |
| |
| static int adv7604_g_mbus_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *fmt) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| fmt->width = state->timings.bt.width; |
| fmt->height = state->timings.bt.height; |
| fmt->code = V4L2_MBUS_FMT_FIXED; |
| fmt->field = V4L2_FIELD_NONE; |
| if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { |
| fmt->colorspace = (state->timings.bt.height <= 576) ? |
| V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709; |
| } |
| return 0; |
| } |
| |
| static int adv7604_isr(struct v4l2_subdev *sd, u32 status, bool *handled) |
| { |
| struct adv7604_state *state = to_state(sd); |
| u8 fmt_change, fmt_change_digital, tx_5v; |
| |
| /* format change */ |
| fmt_change = io_read(sd, 0x43) & 0x98; |
| if (fmt_change) |
| io_write(sd, 0x44, fmt_change); |
| fmt_change_digital = DIGITAL_INPUT ? (io_read(sd, 0x6b) & 0xc0) : 0; |
| if (fmt_change_digital) |
| io_write(sd, 0x6c, fmt_change_digital); |
| if (fmt_change || fmt_change_digital) { |
| v4l2_dbg(1, debug, sd, |
| "%s: ADV7604_FMT_CHANGE, fmt_change = 0x%x, fmt_change_digital = 0x%x\n", |
| __func__, fmt_change, fmt_change_digital); |
| v4l2_subdev_notify(sd, ADV7604_FMT_CHANGE, NULL); |
| if (handled) |
| *handled = true; |
| } |
| /* tx 5v detect */ |
| tx_5v = io_read(sd, 0x70) & 0x10; |
| if (tx_5v) { |
| v4l2_dbg(1, debug, sd, "%s: tx_5v: 0x%x\n", __func__, tx_5v); |
| io_write(sd, 0x71, tx_5v); |
| adv7604_s_detect_tx_5v_ctrl(sd); |
| if (handled) |
| *handled = true; |
| } |
| return 0; |
| } |
| |
| static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) |
| { |
| struct adv7604_state *state = to_state(sd); |
| |
| if (edid->pad != 0) |
| return -EINVAL; |
| if (edid->blocks == 0) |
| return -EINVAL; |
| if (edid->start_block >= state->edid_blocks) |
| return -EINVAL; |
| if (edid->start_block + edid->blocks > state->edid_blocks) |
| edid->blocks = state->edid_blocks - edid->start_block; |
| if (!edid->edid) |
| return -EINVAL; |
| memcpy(edid->edid + edid->start_block * 128, |
| state->edid + edid->start_block * 128, |
| edid->blocks * 128); |
| return 0; |
| } |
| |
| static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) |
| { |
| struct adv7604_state *state = to_state(sd); |
| int err; |
| |
| if (edid->pad != 0) |
| return -EINVAL; |
| if (edid->start_block != 0) |
| return -EINVAL; |
| if (edid->blocks == 0) { |
| /* Pull down the hotplug pin */ |
| v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); |
| /* Disables I2C access to internal EDID ram from DDC port */ |
| rep_write_and_or(sd, 0x77, 0xf0, 0x0); |
| state->edid_blocks = 0; |
| /* Fall back to a 16:9 aspect ratio */ |
| state->aspect_ratio.numerator = 16; |
| state->aspect_ratio.denominator = 9; |
| return 0; |
| } |
| if (edid->blocks > 2) |
| return -E2BIG; |
| if (!edid->edid) |
| return -EINVAL; |
| memcpy(state->edid, edid->edid, 128 * edid->blocks); |
| state->edid_blocks = edid->blocks; |
| state->aspect_ratio = v4l2_calc_aspect_ratio(edid->edid[0x15], |
| edid->edid[0x16]); |
| err = edid_write_block(sd, 128 * edid->blocks, state->edid); |
| if (err < 0) |
| v4l2_err(sd, "error %d writing edid\n", err); |
| return err; |
| } |
| |
| /*********** avi info frame CEA-861-E **************/ |
| |
| static void print_avi_infoframe(struct v4l2_subdev *sd) |
| { |
| int i; |
| u8 buf[14]; |
| u8 avi_len; |
| u8 avi_ver; |
| |
| if (!(hdmi_read(sd, 0x05) & 0x80)) { |
| v4l2_info(sd, "receive DVI-D signal (AVI infoframe not supported)\n"); |
| return; |
| } |
| if (!(io_read(sd, 0x60) & 0x01)) { |
| v4l2_info(sd, "AVI infoframe not received\n"); |
| return; |
| } |
| |
| if (io_read(sd, 0x83) & 0x01) { |
| v4l2_info(sd, "AVI infoframe checksum error has occurred earlier\n"); |
| io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ |
| if (io_read(sd, 0x83) & 0x01) { |
| v4l2_info(sd, "AVI infoframe checksum error still present\n"); |
| io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ |
| } |
| } |
| |
| avi_len = infoframe_read(sd, 0xe2); |
| avi_ver = infoframe_read(sd, 0xe1); |
| v4l2_info(sd, "AVI infoframe version %d (%d byte)\n", |
| avi_ver, avi_len); |
| |
| if (avi_ver != 0x02) |
| return; |
| |
| for (i = 0; i < 14; i++) |
| buf[i] = infoframe_read(sd, i); |
| |
| v4l2_info(sd, |
| "\t%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", |
| buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], |
| buf[8], buf[9], buf[10], buf[11], buf[12], buf[13]); |
| } |
| |
| static int adv7604_log_status(struct v4l2_subdev *sd) |
| { |
| struct adv7604_state *state = to_state(sd); |
| struct v4l2_dv_timings timings; |
| struct stdi_readback stdi; |
| u8 reg_io_0x02 = io_read(sd, 0x02); |
| |
| char *csc_coeff_sel_rb[16] = { |
| "bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB", |
| "reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709", |
| "reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709", |
| "reserved", "reserved", "reserved", "reserved", "manual" |
| }; |
| char *input_color_space_txt[16] = { |
| "RGB limited range (16-235)", "RGB full range (0-255)", |
| "YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)", |
| "XvYCC Bt.601", "XvYCC Bt.709", |
| "YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)", |
| "invalid", "invalid", "invalid", "invalid", "invalid", |
| "invalid", "invalid", "automatic" |
| }; |
| char *rgb_quantization_range_txt[] = { |
| "Automatic", |
| "RGB limited range (16-235)", |
| "RGB full range (0-255)", |
| }; |
| |
| v4l2_info(sd, "-----Chip status-----\n"); |
| v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on"); |
| v4l2_info(sd, "Connector type: %s\n", state->connector_hdmi ? |
| "HDMI" : (DIGITAL_INPUT ? "DVI-D" : "DVI-A")); |
| v4l2_info(sd, "EDID: %s\n", ((rep_read(sd, 0x7d) & 0x01) && |
| (rep_read(sd, 0x77) & 0x01)) ? "enabled" : "disabled "); |
| v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ? |
| "enabled" : "disabled"); |
| |
| v4l2_info(sd, "-----Signal status-----\n"); |
| v4l2_info(sd, "Cable detected (+5V power): %s\n", |
| (io_read(sd, 0x6f) & 0x10) ? "true" : "false"); |
| v4l2_info(sd, "TMDS signal detected: %s\n", |
| no_signal_tmds(sd) ? "false" : "true"); |
| v4l2_info(sd, "TMDS signal locked: %s\n", |
| no_lock_tmds(sd) ? "false" : "true"); |
| v4l2_info(sd, "SSPD locked: %s\n", no_lock_sspd(sd) ? "false" : "true"); |
| v4l2_info(sd, "STDI locked: %s\n", no_lock_stdi(sd) ? "false" : "true"); |
| v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true"); |
| v4l2_info(sd, "CP free run: %s\n", |
| (!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off")); |
| v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x\n", |
| io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f); |
| |
| v4l2_info(sd, "-----Video Timings-----\n"); |
| if (read_stdi(sd, &stdi)) |
| v4l2_info(sd, "STDI: not locked\n"); |
| else |
| v4l2_info(sd, "STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %s, %chsync, %cvsync\n", |
| stdi.lcf, stdi.bl, stdi.lcvs, |
| stdi.interlaced ? "interlaced" : "progressive", |
| stdi.hs_pol, stdi.vs_pol); |
| if (adv7604_query_dv_timings(sd, &timings)) |
| v4l2_info(sd, "No video detected\n"); |
| else |
| adv7604_print_timings(sd, &timings, "Detected format:", true); |
| adv7604_print_timings(sd, &state->timings, "Configured format:", true); |
| |
| v4l2_info(sd, "-----Color space-----\n"); |
| v4l2_info(sd, "RGB quantization range ctrl: %s\n", |
| rgb_quantization_range_txt[state->rgb_quantization_range]); |
| v4l2_info(sd, "Input color space: %s\n", |
| input_color_space_txt[reg_io_0x02 >> 4]); |
| v4l2_info(sd, "Output color space: %s %s, saturator %s\n", |
| (reg_io_0x02 & 0x02) ? "RGB" : "YCbCr", |
| (reg_io_0x02 & 0x04) ? "(16-235)" : "(0-255)", |
| ((reg_io_0x02 & 0x04) ^ (reg_io_0x02 & 0x01)) ? |
| "enabled" : "disabled"); |
| v4l2_info(sd, "Color space conversion: %s\n", |
| csc_coeff_sel_rb[cp_read(sd, 0xfc) >> 4]); |
| |
| /* Digital video */ |
| if (DIGITAL_INPUT) { |
| v4l2_info(sd, "-----HDMI status-----\n"); |
| v4l2_info(sd, "HDCP encrypted content: %s\n", |
| hdmi_read(sd, 0x05) & 0x40 ? "true" : "false"); |
| |
| print_avi_infoframe(sd); |
| } |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct v4l2_ctrl_ops adv7604_ctrl_ops = { |
| .s_ctrl = adv7604_s_ctrl, |
| }; |
| |
| static const struct v4l2_subdev_core_ops adv7604_core_ops = { |
| .log_status = adv7604_log_status, |
| .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, |
| .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, |
| .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, |
| .g_ctrl = v4l2_subdev_g_ctrl, |
| .s_ctrl = v4l2_subdev_s_ctrl, |
| .queryctrl = v4l2_subdev_queryctrl, |
| .querymenu = v4l2_subdev_querymenu, |
| .g_chip_ident = adv7604_g_chip_ident, |
| .interrupt_service_routine = adv7604_isr, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = adv7604_g_register, |
| .s_register = adv7604_s_register, |
| #endif |
| }; |
| |
| static const struct v4l2_subdev_video_ops adv7604_video_ops = { |
| .s_routing = adv7604_s_routing, |
| .g_input_status = adv7604_g_input_status, |
| .s_dv_timings = adv7604_s_dv_timings, |
| .g_dv_timings = adv7604_g_dv_timings, |
| .query_dv_timings = adv7604_query_dv_timings, |
| .enum_dv_timings = adv7604_enum_dv_timings, |
| .dv_timings_cap = adv7604_dv_timings_cap, |
| .enum_mbus_fmt = adv7604_enum_mbus_fmt, |
| .g_mbus_fmt = adv7604_g_mbus_fmt, |
| .try_mbus_fmt = adv7604_g_mbus_fmt, |
| .s_mbus_fmt = adv7604_g_mbus_fmt, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops adv7604_pad_ops = { |
| .get_edid = adv7604_get_edid, |
| .set_edid = adv7604_set_edid, |
| }; |
| |
| static const struct v4l2_subdev_ops adv7604_ops = { |
| .core = &adv7604_core_ops, |
| .video = &adv7604_video_ops, |
| .pad = &adv7604_pad_ops, |
| }; |
| |
| /* -------------------------- custom ctrls ---------------------------------- */ |
| |
| static const struct v4l2_ctrl_config adv7604_ctrl_analog_sampling_phase = { |
| .ops = &adv7604_ctrl_ops, |
| .id = V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE, |
| .name = "Analog Sampling Phase", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = 0x1f, |
| .step = 1, |
| .def = 0, |
| }; |
| |
| static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color_manual = { |
| .ops = &adv7604_ctrl_ops, |
| .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL, |
| .name = "Free Running Color, Manual", |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .min = false, |
| .max = true, |
| .step = 1, |
| .def = false, |
| }; |
| |
| static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color = { |
| .ops = &adv7604_ctrl_ops, |
| .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR, |
| .name = "Free Running Color", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0x0, |
| .max = 0xffffff, |
| .step = 0x1, |
| .def = 0x0, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int adv7604_core_init(struct v4l2_subdev *sd) |
| { |
| struct adv7604_state *state = to_state(sd); |
| struct adv7604_platform_data *pdata = &state->pdata; |
| |
| hdmi_write(sd, 0x48, |
| (pdata->disable_pwrdnb ? 0x80 : 0) | |
| (pdata->disable_cable_det_rst ? 0x40 : 0)); |
| |
| disable_input(sd); |
| |
| /* power */ |
| io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */ |
| io_write(sd, 0x0b, 0x44); /* Power down ESDP block */ |
| cp_write(sd, 0xcf, 0x01); /* Power down macrovision */ |
| |
| /* video format */ |
| io_write_and_or(sd, 0x02, 0xf0, |
| pdata->alt_gamma << 3 | |
| pdata->op_656_range << 2 | |
| pdata->rgb_out << 1 | |
| pdata->alt_data_sat << 0); |
| io_write(sd, 0x03, pdata->op_format_sel); |
| io_write_and_or(sd, 0x04, 0x1f, pdata->op_ch_sel << 5); |
| io_write_and_or(sd, 0x05, 0xf0, pdata->blank_data << 3 | |
| pdata->insert_av_codes << 2 | |
| pdata->replicate_av_codes << 1 | |
| pdata->invert_cbcr << 0); |
| |
| /* TODO from platform data */ |
| cp_write(sd, 0x69, 0x30); /* Enable CP CSC */ |
| io_write(sd, 0x06, 0xa6); /* positive VS and HS */ |
| io_write(sd, 0x14, 0x7f); /* Drive strength adjusted to max */ |
| cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */ |
| cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */ |
| cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold - |
| ADI recommended setting [REF_01 c. 2.3.3] */ |
| cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold - |
| ADI recommended setting [REF_01 c. 2.3.3] */ |
| cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution |
| for digital formats */ |
| |
| /* TODO from platform data */ |
| afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */ |
| |
| afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */ |
| io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4); |
| |
| state->prim_mode = pdata->prim_mode; |
| select_input(sd, pdata->prim_mode); |
| |
| enable_input(sd, pdata->prim_mode); |
| |
| /* interrupts */ |
| io_write(sd, 0x40, 0xc2); /* Configure INT1 */ |
| io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */ |
| io_write(sd, 0x46, 0x98); /* Enable SSPD, STDI and CP unlocked interrupts */ |
| io_write(sd, 0x6e, 0xc0); /* Enable V_LOCKED and DE_REGEN_LCK interrupts */ |
| io_write(sd, 0x73, 0x10); /* Enable CABLE_DET_A_ST (+5v) interrupt */ |
| |
| return v4l2_ctrl_handler_setup(sd->ctrl_handler); |
| } |
| |
| static void adv7604_unregister_clients(struct adv7604_state *state) |
| { |
| if (state->i2c_avlink) |
| i2c_unregister_device(state->i2c_avlink); |
| if (state->i2c_cec) |
| i2c_unregister_device(state->i2c_cec); |
| if (state->i2c_infoframe) |
| i2c_unregister_device(state->i2c_infoframe); |
| if (state->i2c_esdp) |
| i2c_unregister_device(state->i2c_esdp); |
| if (state->i2c_dpp) |
| i2c_unregister_device(state->i2c_dpp); |
| if (state->i2c_afe) |
| i2c_unregister_device(state->i2c_afe); |
| if (state->i2c_repeater) |
| i2c_unregister_device(state->i2c_repeater); |
| if (state->i2c_edid) |
| i2c_unregister_device(state->i2c_edid); |
| if (state->i2c_hdmi) |
| i2c_unregister_device(state->i2c_hdmi); |
| if (state->i2c_test) |
| i2c_unregister_device(state->i2c_test); |
| if (state->i2c_cp) |
| i2c_unregister_device(state->i2c_cp); |
| if (state->i2c_vdp) |
| i2c_unregister_device(state->i2c_vdp); |
| } |
| |
| static struct i2c_client *adv7604_dummy_client(struct v4l2_subdev *sd, |
| u8 addr, u8 io_reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (addr) |
| io_write(sd, io_reg, addr << 1); |
| return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1); |
| } |
| |
| static int adv7604_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct adv7604_state *state; |
| struct adv7604_platform_data *pdata = client->dev.platform_data; |
| struct v4l2_ctrl_handler *hdl; |
| struct v4l2_subdev *sd; |
| int err; |
| |
| /* Check if the adapter supports the needed features */ |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -EIO; |
| v4l_dbg(1, debug, client, "detecting adv7604 client on address 0x%x\n", |
| client->addr << 1); |
| |
| state = kzalloc(sizeof(struct adv7604_state), GFP_KERNEL); |
| if (!state) { |
| v4l_err(client, "Could not allocate adv7604_state memory!\n"); |
| return -ENOMEM; |
| } |
| |
| /* platform data */ |
| if (!pdata) { |
| v4l_err(client, "No platform data!\n"); |
| err = -ENODEV; |
| goto err_state; |
| } |
| memcpy(&state->pdata, pdata, sizeof(state->pdata)); |
| |
| sd = &state->sd; |
| v4l2_i2c_subdev_init(sd, client, &adv7604_ops); |
| sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| state->connector_hdmi = pdata->connector_hdmi; |
| |
| /* i2c access to adv7604? */ |
| if (adv_smbus_read_byte_data_check(client, 0xfb, false) != 0x68) { |
| v4l2_info(sd, "not an adv7604 on address 0x%x\n", |
| client->addr << 1); |
| err = -ENODEV; |
| goto err_state; |
| } |
| |
| /* control handlers */ |
| hdl = &state->hdl; |
| v4l2_ctrl_handler_init(hdl, 9); |
| |
| v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); |
| v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, |
| V4L2_CID_CONTRAST, 0, 255, 1, 128); |
| v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, |
| V4L2_CID_SATURATION, 0, 255, 1, 128); |
| v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, |
| V4L2_CID_HUE, 0, 128, 1, 0); |
| |
| /* private controls */ |
| state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0); |
| state->detect_tx_5v_ctrl->is_private = true; |
| state->rgb_quantization_range_ctrl = |
| v4l2_ctrl_new_std_menu(hdl, &adv7604_ctrl_ops, |
| V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, |
| 0, V4L2_DV_RGB_RANGE_AUTO); |
| state->rgb_quantization_range_ctrl->is_private = true; |
| |
| /* custom controls */ |
| state->analog_sampling_phase_ctrl = |
| v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_analog_sampling_phase, NULL); |
| state->analog_sampling_phase_ctrl->is_private = true; |
| state->free_run_color_manual_ctrl = |
| v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color_manual, NULL); |
| state->free_run_color_manual_ctrl->is_private = true; |
| state->free_run_color_ctrl = |
| v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color, NULL); |
| state->free_run_color_ctrl->is_private = true; |
| |
| sd->ctrl_handler = hdl; |
| if (hdl->error) { |
| err = hdl->error; |
| goto err_hdl; |
| } |
| if (adv7604_s_detect_tx_5v_ctrl(sd)) { |
| err = -ENODEV; |
| goto err_hdl; |
| } |
| |
| state->i2c_avlink = adv7604_dummy_client(sd, pdata->i2c_avlink, 0xf3); |
| state->i2c_cec = adv7604_dummy_client(sd, pdata->i2c_cec, 0xf4); |
| state->i2c_infoframe = adv7604_dummy_client(sd, pdata->i2c_infoframe, 0xf5); |
| state->i2c_esdp = adv7604_dummy_client(sd, pdata->i2c_esdp, 0xf6); |
| state->i2c_dpp = adv7604_dummy_client(sd, pdata->i2c_dpp, 0xf7); |
| state->i2c_afe = adv7604_dummy_client(sd, pdata->i2c_afe, 0xf8); |
| state->i2c_repeater = adv7604_dummy_client(sd, pdata->i2c_repeater, 0xf9); |
| state->i2c_edid = adv7604_dummy_client(sd, pdata->i2c_edid, 0xfa); |
| state->i2c_hdmi = adv7604_dummy_client(sd, pdata->i2c_hdmi, 0xfb); |
| state->i2c_test = adv7604_dummy_client(sd, pdata->i2c_test, 0xfc); |
| state->i2c_cp = adv7604_dummy_client(sd, pdata->i2c_cp, 0xfd); |
| state->i2c_vdp = adv7604_dummy_client(sd, pdata->i2c_vdp, 0xfe); |
| if (!state->i2c_avlink || !state->i2c_cec || !state->i2c_infoframe || |
| !state->i2c_esdp || !state->i2c_dpp || !state->i2c_afe || |
| !state->i2c_repeater || !state->i2c_edid || !state->i2c_hdmi || |
| !state->i2c_test || !state->i2c_cp || !state->i2c_vdp) { |
| err = -ENOMEM; |
| v4l2_err(sd, "failed to create all i2c clients\n"); |
| goto err_i2c; |
| } |
| |
| /* work queues */ |
| state->work_queues = create_singlethread_workqueue(client->name); |
| if (!state->work_queues) { |
| v4l2_err(sd, "Could not create work queue\n"); |
| err = -ENOMEM; |
| goto err_i2c; |
| } |
| |
| INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug, |
| adv7604_delayed_work_enable_hotplug); |
| |
| state->pad.flags = MEDIA_PAD_FL_SOURCE; |
| err = media_entity_init(&sd->entity, 1, &state->pad, 0); |
| if (err) |
| goto err_work_queues; |
| |
| err = adv7604_core_init(sd); |
| if (err) |
| goto err_entity; |
| v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, |
| client->addr << 1, client->adapter->name); |
| return 0; |
| |
| err_entity: |
| media_entity_cleanup(&sd->entity); |
| err_work_queues: |
| cancel_delayed_work(&state->delayed_work_enable_hotplug); |
| destroy_workqueue(state->work_queues); |
| err_i2c: |
| adv7604_unregister_clients(state); |
| err_hdl: |
| v4l2_ctrl_handler_free(hdl); |
| err_state: |
| kfree(state); |
| return err; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int adv7604_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct adv7604_state *state = to_state(sd); |
| |
| cancel_delayed_work(&state->delayed_work_enable_hotplug); |
| destroy_workqueue(state->work_queues); |
| v4l2_device_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| adv7604_unregister_clients(to_state(sd)); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| kfree(to_state(sd)); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static struct i2c_device_id adv7604_id[] = { |
| { "adv7604", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adv7604_id); |
| |
| static struct i2c_driver adv7604_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "adv7604", |
| }, |
| .probe = adv7604_probe, |
| .remove = adv7604_remove, |
| .id_table = adv7604_id, |
| }; |
| |
| module_i2c_driver(adv7604_driver); |