drivers/ssb/driver_mipscore.c - kernel/msm-4.9 - Gitiles

 /*
  * Sonics Silicon Backplane
  * Broadcom MIPS core driver
  *
  * Copyright 2005, Broadcom Corporation
  * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */

 #include <linux/ssb/ssb.h>

 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
 #include <linux/time.h>

 #include "ssb_private.h"


 static inline u32 mips_read32(struct ssb_mipscore *mcore,
 			      u16 offset)
 {
 	return ssb_read32(mcore->dev, offset);
 }

 static inline void mips_write32(struct ssb_mipscore *mcore,
 				u16 offset,
 				u32 value)
 {
 	ssb_write32(mcore->dev, offset, value);
 }

 static const u32 ipsflag_irq_mask[] = {
 	0,
 	SSB_IPSFLAG_IRQ1,
 	SSB_IPSFLAG_IRQ2,
 	SSB_IPSFLAG_IRQ3,
 	SSB_IPSFLAG_IRQ4,
 };

 static const u32 ipsflag_irq_shift[] = {
 	0,
 	SSB_IPSFLAG_IRQ1_SHIFT,
 	SSB_IPSFLAG_IRQ2_SHIFT,
 	SSB_IPSFLAG_IRQ3_SHIFT,
 	SSB_IPSFLAG_IRQ4_SHIFT,
 };

 static inline u32 ssb_irqflag(struct ssb_device *dev)
 {
 	u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
 	if (tpsflag)
 		return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
 	else
 		/* not irq supported */
 		return 0x3f;
 }

 static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
 {
 	struct ssb_bus *bus = rdev->bus;
 	int i;
 	for (i = 0; i < bus->nr_devices; i++) {
 		struct ssb_device *dev;
 		dev = &(bus->devices[i]);
 		if (ssb_irqflag(dev) == irqflag)
 			return dev;
 	}
 	return NULL;
 }

 /* Get the MIPS IRQ assignment for a specified device.
  * If unassigned, 0 is returned.
  * If disabled, 5 is returned.
  * If not supported, 6 is returned.
  */
 unsigned int ssb_mips_irq(struct ssb_device *dev)
 {
 	struct ssb_bus *bus = dev->bus;
 	struct ssb_device *mdev = bus->mipscore.dev;
 	u32 irqflag;
 	u32 ipsflag;
 	u32 tmp;
 	unsigned int irq;

 	irqflag = ssb_irqflag(dev);
 	if (irqflag == 0x3f)
 		return 6;
 	ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
 	for (irq = 1; irq <= 4; irq++) {
 		tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
 		if (tmp == irqflag)
 			break;
 	}
 	if (irq	== 5) {
 		if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
 			irq = 0;
 	}

 	return irq;
 }

 static void clear_irq(struct ssb_bus *bus, unsigned int irq)
 {
 	struct ssb_device *dev = bus->mipscore.dev;

 	/* Clear the IRQ in the MIPScore backplane registers */
 	if (irq == 0) {
 		ssb_write32(dev, SSB_INTVEC, 0);
 	} else {
 		ssb_write32(dev, SSB_IPSFLAG,
 			    ssb_read32(dev, SSB_IPSFLAG) |
 			    ipsflag_irq_mask[irq]);
 	}
 }

 static void set_irq(struct ssb_device *dev, unsigned int irq)
 {
 	unsigned int oldirq = ssb_mips_irq(dev);
 	struct ssb_bus *bus = dev->bus;
 	struct ssb_device *mdev = bus->mipscore.dev;
 	u32 irqflag = ssb_irqflag(dev);

 	BUG_ON(oldirq == 6);

 	dev->irq = irq + 2;

 	/* clear the old irq */
 	if (oldirq == 0)
 		ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
 	else if (oldirq != 5)
 		clear_irq(bus, oldirq);

 	/* assign the new one */
 	if (irq == 0) {
 		ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
 	} else {
 		u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
 		if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
 			u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
 			struct ssb_device *olddev = find_device(dev, oldipsflag);
 			if (olddev)
 				set_irq(olddev, 0);
 		}
 		irqflag <<= ipsflag_irq_shift[irq];
 		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
 	}
 	ssb_dprintk(KERN_INFO PFX
 		    "set_irq: core 0x%04x, irq %d => %d\n",
 		    dev->id.coreid, oldirq+2, irq+2);
 }

 static void print_irq(struct ssb_device *dev, unsigned int irq)
 {
 	int i;
 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
 	ssb_dprintk(KERN_INFO PFX
 		"core 0x%04x, irq :", dev->id.coreid);
 	for (i = 0; i <= 6; i++) {
 		ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
 	}
 	ssb_dprintk("\n");
 }

 static void dump_irq(struct ssb_bus *bus)
 {
 	int i;
 	for (i = 0; i < bus->nr_devices; i++) {
 		struct ssb_device *dev;
 		dev = &(bus->devices[i]);
 		print_irq(dev, ssb_mips_irq(dev));
 	}
 }

 static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
 {
 	struct ssb_bus *bus = mcore->dev->bus;

 	if (bus->extif.dev)
 		mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
 	else if (bus->chipco.dev)
 		mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
 	else
 		mcore->nr_serial_ports = 0;
 }

 static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
 {
 	struct ssb_bus *bus = mcore->dev->bus;

 	/* When there is no chipcommon on the bus there is 4MB flash */
 	if (!bus->chipco.dev) {
 		mcore->flash_buswidth = 2;
 		mcore->flash_window = SSB_FLASH1;
 		mcore->flash_window_size = SSB_FLASH1_SZ;
 		return;
 	}

 	/* There is ChipCommon, so use it to read info about flash */
 	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
 	case SSB_CHIPCO_FLASHT_STSER:
 	case SSB_CHIPCO_FLASHT_ATSER:
 		pr_err("Serial flash not supported\n");
 		break;
 	case SSB_CHIPCO_FLASHT_PARA:
 		pr_debug("Found parallel flash\n");
 		mcore->flash_window = SSB_FLASH2;
 		mcore->flash_window_size = SSB_FLASH2_SZ;
 		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
 		               & SSB_CHIPCO_CFG_DS16) == 0)
 			mcore->flash_buswidth = 1;
 		else
 			mcore->flash_buswidth = 2;
 		break;
 	}
 }

 u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
 {
 	struct ssb_bus *bus = mcore->dev->bus;
 	u32 pll_type, n, m, rate = 0;

 	if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
 		return ssb_pmu_get_cpu_clock(&bus->chipco);

 	if (bus->extif.dev) {
 		ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
 	} else if (bus->chipco.dev) {
 		ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
 	} else
 		return 0;

 	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
 		rate = 200000000;
 	} else {
 		rate = ssb_calc_clock_rate(pll_type, n, m);
 	}

 	if (pll_type == SSB_PLLTYPE_6) {
 		rate *= 2;
 	}

 	return rate;
 }

 void ssb_mipscore_init(struct ssb_mipscore *mcore)
 {
 	struct ssb_bus *bus;
 	struct ssb_device *dev;
 	unsigned long hz, ns;
 	unsigned int irq, i;

 	if (!mcore->dev)
 		return; /* We don't have a MIPS core */

 	ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");

 	bus = mcore->dev->bus;
 	hz = ssb_clockspeed(bus);
 	if (!hz)
 		hz = 100000000;
 	ns = 1000000000 / hz;

 	if (bus->extif.dev)
 		ssb_extif_timing_init(&bus->extif, ns);
 	else if (bus->chipco.dev)
 		ssb_chipco_timing_init(&bus->chipco, ns);

 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
 	for (irq = 2, i = 0; i < bus->nr_devices; i++) {
 		int mips_irq;
 		dev = &(bus->devices[i]);
 		mips_irq = ssb_mips_irq(dev);
 		if (mips_irq > 4)
 			dev->irq = 0;
 		else
 			dev->irq = mips_irq + 2;
 		if (dev->irq > 5)
 			continue;
 		switch (dev->id.coreid) {
 		case SSB_DEV_USB11_HOST:
 			/* shouldn't need a separate irq line for non-4710, most of them have a proper
 			 * external usb controller on the pci */
 			if ((bus->chip_id == 0x4710) && (irq <= 4)) {
 				set_irq(dev, irq++);
 			}
 			break;
 		case SSB_DEV_PCI:
 		case SSB_DEV_ETHERNET:
 		case SSB_DEV_ETHERNET_GBIT:
 		case SSB_DEV_80211:
 		case SSB_DEV_USB20_HOST:
 			/* These devices get their own IRQ line if available, the rest goes on IRQ0 */
 			if (irq <= 4) {
 				set_irq(dev, irq++);
 				break;
 			}
 			/* fallthrough */
 		case SSB_DEV_EXTIF:
 			set_irq(dev, 0);
 			break;
 		}
 	}
 	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
 	dump_irq(bus);

 	ssb_mips_serial_init(mcore);
 	ssb_mips_flash_detect(mcore);
 }
	/*
	* Sonics Silicon Backplane
	* Broadcom MIPS core driver
	*
	* Copyright 2005, Broadcom Corporation
	* Copyright 2006, 2007, Michael Buesch <m@bues.ch>
	*
	* Licensed under the GNU/GPL. See COPYING for details.
	*/

	#include <linux/ssb/ssb.h>

	#include <linux/serial.h>
	#include <linux/serial_core.h>
	#include <linux/serial_reg.h>
	#include <linux/time.h>

	#include "ssb_private.h"


	static inline u32 mips_read32(struct ssb_mipscore *mcore,
	u16 offset)
	{
	return ssb_read32(mcore->dev, offset);
	}

	static inline void mips_write32(struct ssb_mipscore *mcore,
	u16 offset,
	u32 value)
	{
	ssb_write32(mcore->dev, offset, value);
	}

	static const u32 ipsflag_irq_mask[] = {
	0,
	SSB_IPSFLAG_IRQ1,
	SSB_IPSFLAG_IRQ2,
	SSB_IPSFLAG_IRQ3,
	SSB_IPSFLAG_IRQ4,
	};

	static const u32 ipsflag_irq_shift[] = {
	0,
	SSB_IPSFLAG_IRQ1_SHIFT,
	SSB_IPSFLAG_IRQ2_SHIFT,
	SSB_IPSFLAG_IRQ3_SHIFT,
	SSB_IPSFLAG_IRQ4_SHIFT,
	};

	static inline u32 ssb_irqflag(struct ssb_device *dev)
	{
	u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
	if (tpsflag)
	return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
	else
	/* not irq supported */
	return 0x3f;
	}

	static struct ssb_device find_device(struct ssb_device rdev, int irqflag)
	{
	struct ssb_bus *bus = rdev->bus;
	int i;
	for (i = 0; i < bus->nr_devices; i++) {
	struct ssb_device *dev;
	dev = &(bus->devices[i]);
	if (ssb_irqflag(dev) == irqflag)
	return dev;
	}
	return NULL;
	}

	/* Get the MIPS IRQ assignment for a specified device.
	* If unassigned, 0 is returned.
	* If disabled, 5 is returned.
	* If not supported, 6 is returned.
	*/
	unsigned int ssb_mips_irq(struct ssb_device *dev)
	{
	struct ssb_bus *bus = dev->bus;
	struct ssb_device *mdev = bus->mipscore.dev;
	u32 irqflag;
	u32 ipsflag;
	u32 tmp;
	unsigned int irq;

	irqflag = ssb_irqflag(dev);
	if (irqflag == 0x3f)
	return 6;
	ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
	for (irq = 1; irq <= 4; irq++) {
	tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
	if (tmp == irqflag)
	break;
	}
	if (irq == 5) {
	if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
	irq = 0;
	}

	return irq;
	}

	static void clear_irq(struct ssb_bus *bus, unsigned int irq)
	{
	struct ssb_device *dev = bus->mipscore.dev;

	/* Clear the IRQ in the MIPScore backplane registers */
	if (irq == 0) {
	ssb_write32(dev, SSB_INTVEC, 0);
	} else {
	ssb_write32(dev, SSB_IPSFLAG,
	ssb_read32(dev, SSB_IPSFLAG) \|
	ipsflag_irq_mask[irq]);
	}
	}

	static void set_irq(struct ssb_device *dev, unsigned int irq)
	{
	unsigned int oldirq = ssb_mips_irq(dev);
	struct ssb_bus *bus = dev->bus;
	struct ssb_device *mdev = bus->mipscore.dev;
	u32 irqflag = ssb_irqflag(dev);

	BUG_ON(oldirq == 6);

	dev->irq = irq + 2;

	/* clear the old irq */
	if (oldirq == 0)
	ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
	else if (oldirq != 5)
	clear_irq(bus, oldirq);

	/* assign the new one */
	if (irq == 0) {
	ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) \| ssb_read32(mdev, SSB_INTVEC)));
	} else {
	u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
	if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
	u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
	struct ssb_device *olddev = find_device(dev, oldipsflag);
	if (olddev)
	set_irq(olddev, 0);
	}
	irqflag <<= ipsflag_irq_shift[irq];
	irqflag \|= (ipsflag & ~ipsflag_irq_mask[irq]);
	ssb_write32(mdev, SSB_IPSFLAG, irqflag);
	}
	ssb_dprintk(KERN_INFO PFX
	"set_irq: core 0x%04x, irq %d => %d\n",
	dev->id.coreid, oldirq+2, irq+2);
	}

	static void print_irq(struct ssb_device *dev, unsigned int irq)
	{
	int i;
	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
	ssb_dprintk(KERN_INFO PFX
	"core 0x%04x, irq :", dev->id.coreid);
	for (i = 0; i <= 6; i++) {
	ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
	}
	ssb_dprintk("\n");
	}

	static void dump_irq(struct ssb_bus *bus)
	{
	int i;
	for (i = 0; i < bus->nr_devices; i++) {
	struct ssb_device *dev;
	dev = &(bus->devices[i]);
	print_irq(dev, ssb_mips_irq(dev));
	}
	}

	static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
	{
	struct ssb_bus *bus = mcore->dev->bus;

	if (bus->extif.dev)
	mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
	else if (bus->chipco.dev)
	mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
	else
	mcore->nr_serial_ports = 0;
	}

	static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
	{
	struct ssb_bus *bus = mcore->dev->bus;

	/* When there is no chipcommon on the bus there is 4MB flash */
	if (!bus->chipco.dev) {
	mcore->flash_buswidth = 2;
	mcore->flash_window = SSB_FLASH1;
	mcore->flash_window_size = SSB_FLASH1_SZ;
	return;
	}

	/* There is ChipCommon, so use it to read info about flash */
	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
	case SSB_CHIPCO_FLASHT_STSER:
	case SSB_CHIPCO_FLASHT_ATSER:
	pr_err("Serial flash not supported\n");
	break;
	case SSB_CHIPCO_FLASHT_PARA:
	pr_debug("Found parallel flash\n");
	mcore->flash_window = SSB_FLASH2;
	mcore->flash_window_size = SSB_FLASH2_SZ;
	if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
	& SSB_CHIPCO_CFG_DS16) == 0)
	mcore->flash_buswidth = 1;
	else
	mcore->flash_buswidth = 2;
	break;
	}
	}

	u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
	{
	struct ssb_bus *bus = mcore->dev->bus;
	u32 pll_type, n, m, rate = 0;

	if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
	return ssb_pmu_get_cpu_clock(&bus->chipco);

	if (bus->extif.dev) {
	ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
	} else if (bus->chipco.dev) {
	ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
	} else
	return 0;

	if ((pll_type == SSB_PLLTYPE_5) \|\| (bus->chip_id == 0x5365)) {
	rate = 200000000;
	} else {
	rate = ssb_calc_clock_rate(pll_type, n, m);
	}

	if (pll_type == SSB_PLLTYPE_6) {
	rate *= 2;
	}

	return rate;
	}

	void ssb_mipscore_init(struct ssb_mipscore *mcore)
	{
	struct ssb_bus *bus;
	struct ssb_device *dev;
	unsigned long hz, ns;
	unsigned int irq, i;

	if (!mcore->dev)
	return; /* We don't have a MIPS core */

	ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");

	bus = mcore->dev->bus;
	hz = ssb_clockspeed(bus);
	if (!hz)
	hz = 100000000;
	ns = 1000000000 / hz;

	if (bus->extif.dev)
	ssb_extif_timing_init(&bus->extif, ns);
	else if (bus->chipco.dev)
	ssb_chipco_timing_init(&bus->chipco, ns);

	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
	for (irq = 2, i = 0; i < bus->nr_devices; i++) {
	int mips_irq;
	dev = &(bus->devices[i]);
	mips_irq = ssb_mips_irq(dev);
	if (mips_irq > 4)
	dev->irq = 0;
	else
	dev->irq = mips_irq + 2;
	if (dev->irq > 5)
	continue;
	switch (dev->id.coreid) {
	case SSB_DEV_USB11_HOST:
	/* shouldn't need a separate irq line for non-4710, most of them have a proper
	* external usb controller on the pci */
	if ((bus->chip_id == 0x4710) && (irq <= 4)) {
	set_irq(dev, irq++);
	}
	break;
	case SSB_DEV_PCI:
	case SSB_DEV_ETHERNET:
	case SSB_DEV_ETHERNET_GBIT:
	case SSB_DEV_80211:
	case SSB_DEV_USB20_HOST:
	/* These devices get their own IRQ line if available, the rest goes on IRQ0 */
	if (irq <= 4) {
	set_irq(dev, irq++);
	break;
	}
	/* fallthrough */
	case SSB_DEV_EXTIF:
	set_irq(dev, 0);
	break;
	}
	}
	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
	dump_irq(bus);

	ssb_mips_serial_init(mcore);
	ssb_mips_flash_detect(mcore);
	}