| /**************************************************************************** |
| * Driver for Solarflare Solarstorm network controllers and boards |
| * Copyright 2005-2006 Fen Systems Ltd. |
| * Copyright 2005-2008 Solarflare Communications Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation, incorporated herein by reference. |
| */ |
| |
| /* Common definitions for all Efx net driver code */ |
| |
| #ifndef EFX_NET_DRIVER_H |
| #define EFX_NET_DRIVER_H |
| |
| #include <linux/version.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_vlan.h> |
| #include <linux/timer.h> |
| #include <linux/mdio.h> |
| #include <linux/list.h> |
| #include <linux/pci.h> |
| #include <linux/device.h> |
| #include <linux/highmem.h> |
| #include <linux/workqueue.h> |
| #include <linux/i2c.h> |
| |
| #include "enum.h" |
| #include "bitfield.h" |
| |
| /************************************************************************** |
| * |
| * Build definitions |
| * |
| **************************************************************************/ |
| #ifndef EFX_DRIVER_NAME |
| #define EFX_DRIVER_NAME "sfc" |
| #endif |
| #define EFX_DRIVER_VERSION "2.3" |
| |
| #ifdef EFX_ENABLE_DEBUG |
| #define EFX_BUG_ON_PARANOID(x) BUG_ON(x) |
| #define EFX_WARN_ON_PARANOID(x) WARN_ON(x) |
| #else |
| #define EFX_BUG_ON_PARANOID(x) do {} while (0) |
| #define EFX_WARN_ON_PARANOID(x) do {} while (0) |
| #endif |
| |
| /* Un-rate-limited logging */ |
| #define EFX_ERR(efx, fmt, args...) \ |
| dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args) |
| |
| #define EFX_INFO(efx, fmt, args...) \ |
| dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args) |
| |
| #ifdef EFX_ENABLE_DEBUG |
| #define EFX_LOG(efx, fmt, args...) \ |
| dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args) |
| #else |
| #define EFX_LOG(efx, fmt, args...) \ |
| dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args) |
| #endif |
| |
| #define EFX_TRACE(efx, fmt, args...) do {} while (0) |
| |
| #define EFX_REGDUMP(efx, fmt, args...) do {} while (0) |
| |
| /* Rate-limited logging */ |
| #define EFX_ERR_RL(efx, fmt, args...) \ |
| do {if (net_ratelimit()) EFX_ERR(efx, fmt, ##args); } while (0) |
| |
| #define EFX_INFO_RL(efx, fmt, args...) \ |
| do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0) |
| |
| #define EFX_LOG_RL(efx, fmt, args...) \ |
| do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0) |
| |
| /************************************************************************** |
| * |
| * Efx data structures |
| * |
| **************************************************************************/ |
| |
| #define EFX_MAX_CHANNELS 32 |
| #define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS |
| |
| #define EFX_TX_QUEUE_OFFLOAD_CSUM 0 |
| #define EFX_TX_QUEUE_NO_CSUM 1 |
| #define EFX_TX_QUEUE_COUNT 2 |
| |
| /** |
| * struct efx_special_buffer - An Efx special buffer |
| * @addr: CPU base address of the buffer |
| * @dma_addr: DMA base address of the buffer |
| * @len: Buffer length, in bytes |
| * @index: Buffer index within controller;s buffer table |
| * @entries: Number of buffer table entries |
| * |
| * Special buffers are used for the event queues and the TX and RX |
| * descriptor queues for each channel. They are *not* used for the |
| * actual transmit and receive buffers. |
| * |
| * Note that for Falcon, TX and RX descriptor queues live in host memory. |
| * Allocation and freeing procedures must take this into account. |
| */ |
| struct efx_special_buffer { |
| void *addr; |
| dma_addr_t dma_addr; |
| unsigned int len; |
| int index; |
| int entries; |
| }; |
| |
| enum efx_flush_state { |
| FLUSH_NONE, |
| FLUSH_PENDING, |
| FLUSH_FAILED, |
| FLUSH_DONE, |
| }; |
| |
| /** |
| * struct efx_tx_buffer - An Efx TX buffer |
| * @skb: The associated socket buffer. |
| * Set only on the final fragment of a packet; %NULL for all other |
| * fragments. When this fragment completes, then we can free this |
| * skb. |
| * @tsoh: The associated TSO header structure, or %NULL if this |
| * buffer is not a TSO header. |
| * @dma_addr: DMA address of the fragment. |
| * @len: Length of this fragment. |
| * This field is zero when the queue slot is empty. |
| * @continuation: True if this fragment is not the end of a packet. |
| * @unmap_single: True if pci_unmap_single should be used. |
| * @unmap_len: Length of this fragment to unmap |
| */ |
| struct efx_tx_buffer { |
| const struct sk_buff *skb; |
| struct efx_tso_header *tsoh; |
| dma_addr_t dma_addr; |
| unsigned short len; |
| bool continuation; |
| bool unmap_single; |
| unsigned short unmap_len; |
| }; |
| |
| /** |
| * struct efx_tx_queue - An Efx TX queue |
| * |
| * This is a ring buffer of TX fragments. |
| * Since the TX completion path always executes on the same |
| * CPU and the xmit path can operate on different CPUs, |
| * performance is increased by ensuring that the completion |
| * path and the xmit path operate on different cache lines. |
| * This is particularly important if the xmit path is always |
| * executing on one CPU which is different from the completion |
| * path. There is also a cache line for members which are |
| * read but not written on the fast path. |
| * |
| * @efx: The associated Efx NIC |
| * @queue: DMA queue number |
| * @channel: The associated channel |
| * @buffer: The software buffer ring |
| * @txd: The hardware descriptor ring |
| * @flushed: Used when handling queue flushing |
| * @read_count: Current read pointer. |
| * This is the number of buffers that have been removed from both rings. |
| * @stopped: Stopped count. |
| * Set if this TX queue is currently stopping its port. |
| * @insert_count: Current insert pointer |
| * This is the number of buffers that have been added to the |
| * software ring. |
| * @write_count: Current write pointer |
| * This is the number of buffers that have been added to the |
| * hardware ring. |
| * @old_read_count: The value of read_count when last checked. |
| * This is here for performance reasons. The xmit path will |
| * only get the up-to-date value of read_count if this |
| * variable indicates that the queue is full. This is to |
| * avoid cache-line ping-pong between the xmit path and the |
| * completion path. |
| * @tso_headers_free: A list of TSO headers allocated for this TX queue |
| * that are not in use, and so available for new TSO sends. The list |
| * is protected by the TX queue lock. |
| * @tso_bursts: Number of times TSO xmit invoked by kernel |
| * @tso_long_headers: Number of packets with headers too long for standard |
| * blocks |
| * @tso_packets: Number of packets via the TSO xmit path |
| */ |
| struct efx_tx_queue { |
| /* Members which don't change on the fast path */ |
| struct efx_nic *efx ____cacheline_aligned_in_smp; |
| int queue; |
| struct efx_channel *channel; |
| struct efx_nic *nic; |
| struct efx_tx_buffer *buffer; |
| struct efx_special_buffer txd; |
| enum efx_flush_state flushed; |
| |
| /* Members used mainly on the completion path */ |
| unsigned int read_count ____cacheline_aligned_in_smp; |
| int stopped; |
| |
| /* Members used only on the xmit path */ |
| unsigned int insert_count ____cacheline_aligned_in_smp; |
| unsigned int write_count; |
| unsigned int old_read_count; |
| struct efx_tso_header *tso_headers_free; |
| unsigned int tso_bursts; |
| unsigned int tso_long_headers; |
| unsigned int tso_packets; |
| }; |
| |
| /** |
| * struct efx_rx_buffer - An Efx RX data buffer |
| * @dma_addr: DMA base address of the buffer |
| * @skb: The associated socket buffer, if any. |
| * If both this and page are %NULL, the buffer slot is currently free. |
| * @page: The associated page buffer, if any. |
| * If both this and skb are %NULL, the buffer slot is currently free. |
| * @data: Pointer to ethernet header |
| * @len: Buffer length, in bytes. |
| * @unmap_addr: DMA address to unmap |
| */ |
| struct efx_rx_buffer { |
| dma_addr_t dma_addr; |
| struct sk_buff *skb; |
| struct page *page; |
| char *data; |
| unsigned int len; |
| dma_addr_t unmap_addr; |
| }; |
| |
| /** |
| * struct efx_rx_queue - An Efx RX queue |
| * @efx: The associated Efx NIC |
| * @queue: DMA queue number |
| * @channel: The associated channel |
| * @buffer: The software buffer ring |
| * @rxd: The hardware descriptor ring |
| * @added_count: Number of buffers added to the receive queue. |
| * @notified_count: Number of buffers given to NIC (<= @added_count). |
| * @removed_count: Number of buffers removed from the receive queue. |
| * @add_lock: Receive queue descriptor add spin lock. |
| * This lock must be held in order to add buffers to the RX |
| * descriptor ring (rxd and buffer) and to update added_count (but |
| * not removed_count). |
| * @max_fill: RX descriptor maximum fill level (<= ring size) |
| * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill |
| * (<= @max_fill) |
| * @fast_fill_limit: The level to which a fast fill will fill |
| * (@fast_fill_trigger <= @fast_fill_limit <= @max_fill) |
| * @min_fill: RX descriptor minimum non-zero fill level. |
| * This records the minimum fill level observed when a ring |
| * refill was triggered. |
| * @min_overfill: RX descriptor minimum overflow fill level. |
| * This records the minimum fill level at which RX queue |
| * overflow was observed. It should never be set. |
| * @alloc_page_count: RX allocation strategy counter. |
| * @alloc_skb_count: RX allocation strategy counter. |
| * @work: Descriptor push work thread |
| * @buf_page: Page for next RX buffer. |
| * We can use a single page for multiple RX buffers. This tracks |
| * the remaining space in the allocation. |
| * @buf_dma_addr: Page's DMA address. |
| * @buf_data: Page's host address. |
| * @flushed: Use when handling queue flushing |
| */ |
| struct efx_rx_queue { |
| struct efx_nic *efx; |
| int queue; |
| struct efx_channel *channel; |
| struct efx_rx_buffer *buffer; |
| struct efx_special_buffer rxd; |
| |
| int added_count; |
| int notified_count; |
| int removed_count; |
| spinlock_t add_lock; |
| unsigned int max_fill; |
| unsigned int fast_fill_trigger; |
| unsigned int fast_fill_limit; |
| unsigned int min_fill; |
| unsigned int min_overfill; |
| unsigned int alloc_page_count; |
| unsigned int alloc_skb_count; |
| struct delayed_work work; |
| unsigned int slow_fill_count; |
| |
| struct page *buf_page; |
| dma_addr_t buf_dma_addr; |
| char *buf_data; |
| enum efx_flush_state flushed; |
| }; |
| |
| /** |
| * struct efx_buffer - An Efx general-purpose buffer |
| * @addr: host base address of the buffer |
| * @dma_addr: DMA base address of the buffer |
| * @len: Buffer length, in bytes |
| * |
| * Falcon uses these buffers for its interrupt status registers and |
| * MAC stats dumps. |
| */ |
| struct efx_buffer { |
| void *addr; |
| dma_addr_t dma_addr; |
| unsigned int len; |
| }; |
| |
| |
| /* Flags for channel->used_flags */ |
| #define EFX_USED_BY_RX 1 |
| #define EFX_USED_BY_TX 2 |
| #define EFX_USED_BY_RX_TX (EFX_USED_BY_RX | EFX_USED_BY_TX) |
| |
| enum efx_rx_alloc_method { |
| RX_ALLOC_METHOD_AUTO = 0, |
| RX_ALLOC_METHOD_SKB = 1, |
| RX_ALLOC_METHOD_PAGE = 2, |
| }; |
| |
| /** |
| * struct efx_channel - An Efx channel |
| * |
| * A channel comprises an event queue, at least one TX queue, at least |
| * one RX queue, and an associated tasklet for processing the event |
| * queue. |
| * |
| * @efx: Associated Efx NIC |
| * @channel: Channel instance number |
| * @name: Name for channel and IRQ |
| * @used_flags: Channel is used by net driver |
| * @enabled: Channel enabled indicator |
| * @irq: IRQ number (MSI and MSI-X only) |
| * @irq_moderation: IRQ moderation value (in hardware ticks) |
| * @napi_dev: Net device used with NAPI |
| * @napi_str: NAPI control structure |
| * @reset_work: Scheduled reset work thread |
| * @work_pending: Is work pending via NAPI? |
| * @eventq: Event queue buffer |
| * @eventq_read_ptr: Event queue read pointer |
| * @last_eventq_read_ptr: Last event queue read pointer value. |
| * @eventq_magic: Event queue magic value for driver-generated test events |
| * @irq_count: Number of IRQs since last adaptive moderation decision |
| * @irq_mod_score: IRQ moderation score |
| * @rx_alloc_level: Watermark based heuristic counter for pushing descriptors |
| * and diagnostic counters |
| * @rx_alloc_push_pages: RX allocation method currently in use for pushing |
| * descriptors |
| * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors |
| * @n_rx_ip_frag_err: Count of RX IP fragment errors |
| * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors |
| * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors |
| * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors |
| * @n_rx_overlength: Count of RX_OVERLENGTH errors |
| * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun |
| */ |
| struct efx_channel { |
| struct efx_nic *efx; |
| int channel; |
| char name[IFNAMSIZ + 6]; |
| int used_flags; |
| bool enabled; |
| int irq; |
| unsigned int irq_moderation; |
| struct net_device *napi_dev; |
| struct napi_struct napi_str; |
| bool work_pending; |
| struct efx_special_buffer eventq; |
| unsigned int eventq_read_ptr; |
| unsigned int last_eventq_read_ptr; |
| unsigned int eventq_magic; |
| |
| unsigned int irq_count; |
| unsigned int irq_mod_score; |
| |
| int rx_alloc_level; |
| int rx_alloc_push_pages; |
| |
| unsigned n_rx_tobe_disc; |
| unsigned n_rx_ip_frag_err; |
| unsigned n_rx_ip_hdr_chksum_err; |
| unsigned n_rx_tcp_udp_chksum_err; |
| unsigned n_rx_frm_trunc; |
| unsigned n_rx_overlength; |
| unsigned n_skbuff_leaks; |
| |
| /* Used to pipeline received packets in order to optimise memory |
| * access with prefetches. |
| */ |
| struct efx_rx_buffer *rx_pkt; |
| bool rx_pkt_csummed; |
| |
| }; |
| |
| enum efx_led_mode { |
| EFX_LED_OFF = 0, |
| EFX_LED_ON = 1, |
| EFX_LED_DEFAULT = 2 |
| }; |
| |
| #define STRING_TABLE_LOOKUP(val, member) \ |
| ((val) < member ## _max) ? member ## _names[val] : "(invalid)" |
| |
| extern const char *efx_loopback_mode_names[]; |
| extern const unsigned int efx_loopback_mode_max; |
| #define LOOPBACK_MODE(efx) \ |
| STRING_TABLE_LOOKUP((efx)->loopback_mode, efx_loopback_mode) |
| |
| extern const char *efx_interrupt_mode_names[]; |
| extern const unsigned int efx_interrupt_mode_max; |
| #define INT_MODE(efx) \ |
| STRING_TABLE_LOOKUP(efx->interrupt_mode, efx_interrupt_mode) |
| |
| extern const char *efx_reset_type_names[]; |
| extern const unsigned int efx_reset_type_max; |
| #define RESET_TYPE(type) \ |
| STRING_TABLE_LOOKUP(type, efx_reset_type) |
| |
| enum efx_int_mode { |
| /* Be careful if altering to correct macro below */ |
| EFX_INT_MODE_MSIX = 0, |
| EFX_INT_MODE_MSI = 1, |
| EFX_INT_MODE_LEGACY = 2, |
| EFX_INT_MODE_MAX /* Insert any new items before this */ |
| }; |
| #define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI) |
| |
| enum phy_type { |
| PHY_TYPE_NONE = 0, |
| PHY_TYPE_TXC43128 = 1, |
| PHY_TYPE_88E1111 = 2, |
| PHY_TYPE_SFX7101 = 3, |
| PHY_TYPE_QT2022C2 = 4, |
| PHY_TYPE_PM8358 = 6, |
| PHY_TYPE_SFT9001A = 8, |
| PHY_TYPE_QT2025C = 9, |
| PHY_TYPE_SFT9001B = 10, |
| PHY_TYPE_MAX /* Insert any new items before this */ |
| }; |
| |
| #define EFX_IS10G(efx) ((efx)->link_state.speed == 10000) |
| |
| enum nic_state { |
| STATE_INIT = 0, |
| STATE_RUNNING = 1, |
| STATE_FINI = 2, |
| STATE_DISABLED = 3, |
| STATE_MAX, |
| }; |
| |
| /* |
| * Alignment of page-allocated RX buffers |
| * |
| * Controls the number of bytes inserted at the start of an RX buffer. |
| * This is the equivalent of NET_IP_ALIGN [which controls the alignment |
| * of the skb->head for hardware DMA]. |
| */ |
| #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS |
| #define EFX_PAGE_IP_ALIGN 0 |
| #else |
| #define EFX_PAGE_IP_ALIGN NET_IP_ALIGN |
| #endif |
| |
| /* |
| * Alignment of the skb->head which wraps a page-allocated RX buffer |
| * |
| * The skb allocated to wrap an rx_buffer can have this alignment. Since |
| * the data is memcpy'd from the rx_buf, it does not need to be equal to |
| * EFX_PAGE_IP_ALIGN. |
| */ |
| #define EFX_PAGE_SKB_ALIGN 2 |
| |
| /* Forward declaration */ |
| struct efx_nic; |
| |
| /* Pseudo bit-mask flow control field */ |
| enum efx_fc_type { |
| EFX_FC_RX = FLOW_CTRL_RX, |
| EFX_FC_TX = FLOW_CTRL_TX, |
| EFX_FC_AUTO = 4, |
| }; |
| |
| /* Supported MAC bit-mask */ |
| enum efx_mac_type { |
| EFX_GMAC = 1, |
| EFX_XMAC = 2, |
| }; |
| |
| /** |
| * struct efx_link_state - Current state of the link |
| * @up: Link is up |
| * @fd: Link is full-duplex |
| * @fc: Actual flow control flags |
| * @speed: Link speed (Mbps) |
| */ |
| struct efx_link_state { |
| bool up; |
| bool fd; |
| enum efx_fc_type fc; |
| unsigned int speed; |
| }; |
| |
| /** |
| * struct efx_mac_operations - Efx MAC operations table |
| * @reconfigure: Reconfigure MAC. Serialised by the mac_lock |
| * @update_stats: Update statistics |
| * @irq: Hardware MAC event callback. Serialised by the mac_lock |
| * @poll: Poll for hardware state. Serialised by the mac_lock |
| */ |
| struct efx_mac_operations { |
| void (*reconfigure) (struct efx_nic *efx); |
| void (*update_stats) (struct efx_nic *efx); |
| void (*irq) (struct efx_nic *efx); |
| void (*poll) (struct efx_nic *efx); |
| }; |
| |
| /** |
| * struct efx_phy_operations - Efx PHY operations table |
| * @init: Initialise PHY |
| * @fini: Shut down PHY |
| * @reconfigure: Reconfigure PHY (e.g. for new link parameters) |
| * @clear_interrupt: Clear down interrupt |
| * @poll: Poll for hardware state. Serialised by the mac_lock. |
| * @get_settings: Get ethtool settings. Serialised by the mac_lock. |
| * @set_settings: Set ethtool settings. Serialised by the mac_lock. |
| * @set_npage_adv: Set abilities advertised in (Extended) Next Page |
| * (only needed where AN bit is set in mmds) |
| * @num_tests: Number of PHY-specific tests/results |
| * @test_names: Names of the tests/results |
| * @run_tests: Run tests and record results as appropriate. |
| * Flags are the ethtool tests flags. |
| * @mmds: MMD presence mask |
| * @loopbacks: Supported loopback modes mask |
| */ |
| struct efx_phy_operations { |
| enum efx_mac_type macs; |
| int (*init) (struct efx_nic *efx); |
| void (*fini) (struct efx_nic *efx); |
| void (*reconfigure) (struct efx_nic *efx); |
| void (*clear_interrupt) (struct efx_nic *efx); |
| void (*poll) (struct efx_nic *efx); |
| void (*get_settings) (struct efx_nic *efx, |
| struct ethtool_cmd *ecmd); |
| int (*set_settings) (struct efx_nic *efx, |
| struct ethtool_cmd *ecmd); |
| void (*set_npage_adv) (struct efx_nic *efx, u32); |
| u32 num_tests; |
| const char *const *test_names; |
| int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags); |
| int mmds; |
| unsigned loopbacks; |
| }; |
| |
| /** |
| * @enum efx_phy_mode - PHY operating mode flags |
| * @PHY_MODE_NORMAL: on and should pass traffic |
| * @PHY_MODE_TX_DISABLED: on with TX disabled |
| * @PHY_MODE_LOW_POWER: set to low power through MDIO |
| * @PHY_MODE_OFF: switched off through external control |
| * @PHY_MODE_SPECIAL: on but will not pass traffic |
| */ |
| enum efx_phy_mode { |
| PHY_MODE_NORMAL = 0, |
| PHY_MODE_TX_DISABLED = 1, |
| PHY_MODE_LOW_POWER = 2, |
| PHY_MODE_OFF = 4, |
| PHY_MODE_SPECIAL = 8, |
| }; |
| |
| static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode) |
| { |
| return !!(mode & ~PHY_MODE_TX_DISABLED); |
| } |
| |
| /* |
| * Efx extended statistics |
| * |
| * Not all statistics are provided by all supported MACs. The purpose |
| * is this structure is to contain the raw statistics provided by each |
| * MAC. |
| */ |
| struct efx_mac_stats { |
| u64 tx_bytes; |
| u64 tx_good_bytes; |
| u64 tx_bad_bytes; |
| unsigned long tx_packets; |
| unsigned long tx_bad; |
| unsigned long tx_pause; |
| unsigned long tx_control; |
| unsigned long tx_unicast; |
| unsigned long tx_multicast; |
| unsigned long tx_broadcast; |
| unsigned long tx_lt64; |
| unsigned long tx_64; |
| unsigned long tx_65_to_127; |
| unsigned long tx_128_to_255; |
| unsigned long tx_256_to_511; |
| unsigned long tx_512_to_1023; |
| unsigned long tx_1024_to_15xx; |
| unsigned long tx_15xx_to_jumbo; |
| unsigned long tx_gtjumbo; |
| unsigned long tx_collision; |
| unsigned long tx_single_collision; |
| unsigned long tx_multiple_collision; |
| unsigned long tx_excessive_collision; |
| unsigned long tx_deferred; |
| unsigned long tx_late_collision; |
| unsigned long tx_excessive_deferred; |
| unsigned long tx_non_tcpudp; |
| unsigned long tx_mac_src_error; |
| unsigned long tx_ip_src_error; |
| u64 rx_bytes; |
| u64 rx_good_bytes; |
| u64 rx_bad_bytes; |
| unsigned long rx_packets; |
| unsigned long rx_good; |
| unsigned long rx_bad; |
| unsigned long rx_pause; |
| unsigned long rx_control; |
| unsigned long rx_unicast; |
| unsigned long rx_multicast; |
| unsigned long rx_broadcast; |
| unsigned long rx_lt64; |
| unsigned long rx_64; |
| unsigned long rx_65_to_127; |
| unsigned long rx_128_to_255; |
| unsigned long rx_256_to_511; |
| unsigned long rx_512_to_1023; |
| unsigned long rx_1024_to_15xx; |
| unsigned long rx_15xx_to_jumbo; |
| unsigned long rx_gtjumbo; |
| unsigned long rx_bad_lt64; |
| unsigned long rx_bad_64_to_15xx; |
| unsigned long rx_bad_15xx_to_jumbo; |
| unsigned long rx_bad_gtjumbo; |
| unsigned long rx_overflow; |
| unsigned long rx_missed; |
| unsigned long rx_false_carrier; |
| unsigned long rx_symbol_error; |
| unsigned long rx_align_error; |
| unsigned long rx_length_error; |
| unsigned long rx_internal_error; |
| unsigned long rx_good_lt64; |
| }; |
| |
| /* Number of bits used in a multicast filter hash address */ |
| #define EFX_MCAST_HASH_BITS 8 |
| |
| /* Number of (single-bit) entries in a multicast filter hash */ |
| #define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS) |
| |
| /* An Efx multicast filter hash */ |
| union efx_multicast_hash { |
| u8 byte[EFX_MCAST_HASH_ENTRIES / 8]; |
| efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8]; |
| }; |
| |
| /** |
| * struct efx_nic - an Efx NIC |
| * @name: Device name (net device name or bus id before net device registered) |
| * @pci_dev: The PCI device |
| * @type: Controller type attributes |
| * @legacy_irq: IRQ number |
| * @workqueue: Workqueue for port reconfigures and the HW monitor. |
| * Work items do not hold and must not acquire RTNL. |
| * @workqueue_name: Name of workqueue |
| * @reset_work: Scheduled reset workitem |
| * @monitor_work: Hardware monitor workitem |
| * @membase_phys: Memory BAR value as physical address |
| * @membase: Memory BAR value |
| * @biu_lock: BIU (bus interface unit) lock |
| * @interrupt_mode: Interrupt mode |
| * @irq_rx_adaptive: Adaptive IRQ moderation enabled for RX event queues |
| * @irq_rx_moderation: IRQ moderation time for RX event queues |
| * @state: Device state flag. Serialised by the rtnl_lock. |
| * @reset_pending: Pending reset method (normally RESET_TYPE_NONE) |
| * @tx_queue: TX DMA queues |
| * @rx_queue: RX DMA queues |
| * @channel: Channels |
| * @next_buffer_table: First available buffer table id |
| * @n_rx_queues: Number of RX queues |
| * @n_channels: Number of channels in use |
| * @rx_buffer_len: RX buffer length |
| * @rx_buffer_order: Order (log2) of number of pages for each RX buffer |
| * @int_error_count: Number of internal errors seen recently |
| * @int_error_expire: Time at which error count will be expired |
| * @irq_status: Interrupt status buffer |
| * @last_irq_cpu: Last CPU to handle interrupt. |
| * This register is written with the SMP processor ID whenever an |
| * interrupt is handled. It is used by falcon_test_interrupt() |
| * to verify that an interrupt has occurred. |
| * @spi_flash: SPI flash device |
| * This field will be %NULL if no flash device is present. |
| * @spi_eeprom: SPI EEPROM device |
| * This field will be %NULL if no EEPROM device is present. |
| * @spi_lock: SPI bus lock |
| * @n_rx_nodesc_drop_cnt: RX no descriptor drop count |
| * @nic_data: Hardware dependant state |
| * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode, |
| * @port_inhibited, efx_monitor() and efx_reconfigure_port() |
| * @port_enabled: Port enabled indicator. |
| * Serialises efx_stop_all(), efx_start_all(), efx_monitor(), |
| * efx_phy_work(), and efx_mac_work() with kernel interfaces. Safe to read |
| * under any one of the rtnl_lock, mac_lock, or netif_tx_lock, but all |
| * three must be held to modify it. |
| * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock |
| * @port_initialized: Port initialized? |
| * @net_dev: Operating system network device. Consider holding the rtnl lock |
| * @rx_checksum_enabled: RX checksumming enabled |
| * @netif_stop_count: Port stop count |
| * @netif_stop_lock: Port stop lock |
| * @mac_stats: MAC statistics. These include all statistics the MACs |
| * can provide. Generic code converts these into a standard |
| * &struct net_device_stats. |
| * @stats_buffer: DMA buffer for statistics |
| * @stats_lock: Statistics update lock. Serialises statistics fetches |
| * @mac_op: MAC interface |
| * @mac_address: Permanent MAC address |
| * @phy_type: PHY type |
| * @phy_lock: PHY access lock |
| * @phy_op: PHY interface |
| * @phy_data: PHY private data (including PHY-specific stats) |
| * @mdio: PHY MDIO interface |
| * @phy_mode: PHY operating mode. Serialised by @mac_lock. |
| * @mac_up: MAC link state |
| * @link_state: Current state of the link |
| * @n_link_state_changes: Number of times the link has changed state |
| * @promiscuous: Promiscuous flag. Protected by netif_tx_lock. |
| * @multicast_hash: Multicast hash table |
| * @wanted_fc: Wanted flow control flags |
| * @phy_work: work item for dealing with PHY events |
| * @mac_work: work item for dealing with MAC events |
| * @loopback_mode: Loopback status |
| * @loopback_modes: Supported loopback mode bitmask |
| * @loopback_selftest: Offline self-test private state |
| * |
| * The @priv field of the corresponding &struct net_device points to |
| * this. |
| */ |
| struct efx_nic { |
| char name[IFNAMSIZ]; |
| struct pci_dev *pci_dev; |
| const struct efx_nic_type *type; |
| int legacy_irq; |
| struct workqueue_struct *workqueue; |
| char workqueue_name[16]; |
| struct work_struct reset_work; |
| struct delayed_work monitor_work; |
| resource_size_t membase_phys; |
| void __iomem *membase; |
| spinlock_t biu_lock; |
| enum efx_int_mode interrupt_mode; |
| bool irq_rx_adaptive; |
| unsigned int irq_rx_moderation; |
| |
| enum nic_state state; |
| enum reset_type reset_pending; |
| |
| struct efx_tx_queue tx_queue[EFX_TX_QUEUE_COUNT]; |
| struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES]; |
| struct efx_channel channel[EFX_MAX_CHANNELS]; |
| |
| unsigned next_buffer_table; |
| int n_rx_queues; |
| int n_channels; |
| unsigned int rx_buffer_len; |
| unsigned int rx_buffer_order; |
| |
| unsigned int_error_count; |
| unsigned long int_error_expire; |
| |
| struct efx_buffer irq_status; |
| volatile signed int last_irq_cpu; |
| |
| struct efx_spi_device *spi_flash; |
| struct efx_spi_device *spi_eeprom; |
| struct mutex spi_lock; |
| |
| unsigned n_rx_nodesc_drop_cnt; |
| |
| struct falcon_nic_data *nic_data; |
| |
| struct mutex mac_lock; |
| struct work_struct mac_work; |
| bool port_enabled; |
| bool port_inhibited; |
| |
| bool port_initialized; |
| struct net_device *net_dev; |
| bool rx_checksum_enabled; |
| |
| atomic_t netif_stop_count; |
| spinlock_t netif_stop_lock; |
| |
| struct efx_mac_stats mac_stats; |
| struct efx_buffer stats_buffer; |
| spinlock_t stats_lock; |
| |
| struct efx_mac_operations *mac_op; |
| unsigned char mac_address[ETH_ALEN]; |
| |
| enum phy_type phy_type; |
| spinlock_t phy_lock; |
| struct work_struct phy_work; |
| struct efx_phy_operations *phy_op; |
| void *phy_data; |
| struct mdio_if_info mdio; |
| enum efx_phy_mode phy_mode; |
| |
| bool mac_up; |
| struct efx_link_state link_state; |
| unsigned int n_link_state_changes; |
| |
| bool promiscuous; |
| union efx_multicast_hash multicast_hash; |
| enum efx_fc_type wanted_fc; |
| |
| atomic_t rx_reset; |
| enum efx_loopback_mode loopback_mode; |
| unsigned int loopback_modes; |
| |
| void *loopback_selftest; |
| }; |
| |
| static inline int efx_dev_registered(struct efx_nic *efx) |
| { |
| return efx->net_dev->reg_state == NETREG_REGISTERED; |
| } |
| |
| /* Net device name, for inclusion in log messages if it has been registered. |
| * Use efx->name not efx->net_dev->name so that races with (un)registration |
| * are harmless. |
| */ |
| static inline const char *efx_dev_name(struct efx_nic *efx) |
| { |
| return efx_dev_registered(efx) ? efx->name : ""; |
| } |
| |
| /** |
| * struct efx_nic_type - Efx device type definition |
| * @mem_map_size: Memory BAR mapped size |
| * @txd_ptr_tbl_base: TX descriptor ring base address |
| * @rxd_ptr_tbl_base: RX descriptor ring base address |
| * @buf_tbl_base: Buffer table base address |
| * @evq_ptr_tbl_base: Event queue pointer table base address |
| * @evq_rptr_tbl_base: Event queue read-pointer table base address |
| * @max_dma_mask: Maximum possible DMA mask |
| * @rx_buffer_padding: Padding added to each RX buffer |
| * @max_interrupt_mode: Highest capability interrupt mode supported |
| * from &enum efx_init_mode. |
| * @phys_addr_channels: Number of channels with physically addressed |
| * descriptors |
| */ |
| struct efx_nic_type { |
| unsigned int mem_map_size; |
| unsigned int txd_ptr_tbl_base; |
| unsigned int rxd_ptr_tbl_base; |
| unsigned int buf_tbl_base; |
| unsigned int evq_ptr_tbl_base; |
| unsigned int evq_rptr_tbl_base; |
| |
| u64 max_dma_mask; |
| |
| unsigned int rx_buffer_padding; |
| unsigned int max_interrupt_mode; |
| unsigned int phys_addr_channels; |
| }; |
| |
| /************************************************************************** |
| * |
| * Prototypes and inline functions |
| * |
| *************************************************************************/ |
| |
| /* Iterate over all used channels */ |
| #define efx_for_each_channel(_channel, _efx) \ |
| for (_channel = &_efx->channel[0]; \ |
| _channel < &_efx->channel[EFX_MAX_CHANNELS]; \ |
| _channel++) \ |
| if (!_channel->used_flags) \ |
| continue; \ |
| else |
| |
| /* Iterate over all used TX queues */ |
| #define efx_for_each_tx_queue(_tx_queue, _efx) \ |
| for (_tx_queue = &_efx->tx_queue[0]; \ |
| _tx_queue < &_efx->tx_queue[EFX_TX_QUEUE_COUNT]; \ |
| _tx_queue++) |
| |
| /* Iterate over all TX queues belonging to a channel */ |
| #define efx_for_each_channel_tx_queue(_tx_queue, _channel) \ |
| for (_tx_queue = &_channel->efx->tx_queue[0]; \ |
| _tx_queue < &_channel->efx->tx_queue[EFX_TX_QUEUE_COUNT]; \ |
| _tx_queue++) \ |
| if (_tx_queue->channel != _channel) \ |
| continue; \ |
| else |
| |
| /* Iterate over all used RX queues */ |
| #define efx_for_each_rx_queue(_rx_queue, _efx) \ |
| for (_rx_queue = &_efx->rx_queue[0]; \ |
| _rx_queue < &_efx->rx_queue[_efx->n_rx_queues]; \ |
| _rx_queue++) |
| |
| /* Iterate over all RX queues belonging to a channel */ |
| #define efx_for_each_channel_rx_queue(_rx_queue, _channel) \ |
| for (_rx_queue = &_channel->efx->rx_queue[_channel->channel]; \ |
| _rx_queue; \ |
| _rx_queue = NULL) \ |
| if (_rx_queue->channel != _channel) \ |
| continue; \ |
| else |
| |
| /* Returns a pointer to the specified receive buffer in the RX |
| * descriptor queue. |
| */ |
| static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue, |
| unsigned int index) |
| { |
| return (&rx_queue->buffer[index]); |
| } |
| |
| /* Set bit in a little-endian bitfield */ |
| static inline void set_bit_le(unsigned nr, unsigned char *addr) |
| { |
| addr[nr / 8] |= (1 << (nr % 8)); |
| } |
| |
| /* Clear bit in a little-endian bitfield */ |
| static inline void clear_bit_le(unsigned nr, unsigned char *addr) |
| { |
| addr[nr / 8] &= ~(1 << (nr % 8)); |
| } |
| |
| |
| /** |
| * EFX_MAX_FRAME_LEN - calculate maximum frame length |
| * |
| * This calculates the maximum frame length that will be used for a |
| * given MTU. The frame length will be equal to the MTU plus a |
| * constant amount of header space and padding. This is the quantity |
| * that the net driver will program into the MAC as the maximum frame |
| * length. |
| * |
| * The 10G MAC used in Falcon requires 8-byte alignment on the frame |
| * length, so we round up to the nearest 8. |
| * |
| * Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an |
| * XGMII cycle). If the frame length reaches the maximum value in the |
| * same cycle, the XMAC can miss the IPG altogether. We work around |
| * this by adding a further 16 bytes. |
| */ |
| #define EFX_MAX_FRAME_LEN(mtu) \ |
| ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */ + 7) & ~7) + 16) |
| |
| |
| #endif /* EFX_NET_DRIVER_H */ |