include/asm-m68knommu/bitops.h - kernel/msm-4.9 - Gitiles

 #ifndef _M68KNOMMU_BITOPS_H
 #define _M68KNOMMU_BITOPS_H

 /*
  * Copyright 1992, Linus Torvalds.
  */

 #include <linux/config.h>
 #include <linux/compiler.h>
 #include <asm/byteorder.h>	/* swab32 */
 #include <asm/system.h>		/* save_flags */

 #ifdef __KERNEL__

 /*
  *	Generic ffs().
  */
 static inline int ffs(int x)
 {
 	int r = 1;

 	if (!x)
 		return 0;
 	if (!(x & 0xffff)) {
 		x >>= 16;
 		r += 16;
 	}
 	if (!(x & 0xff)) {
 		x >>= 8;
 		r += 8;
 	}
 	if (!(x & 0xf)) {
 		x >>= 4;
 		r += 4;
 	}
 	if (!(x & 3)) {
 		x >>= 2;
 		r += 2;
 	}
 	if (!(x & 1)) {
 		x >>= 1;
 		r += 1;
 	}
 	return r;
 }

 /*
  *	Generic __ffs().
  */
 static inline int __ffs(int x)
 {
 	int r = 0;

 	if (!x)
 		return 0;
 	if (!(x & 0xffff)) {
 		x >>= 16;
 		r += 16;
 	}
 	if (!(x & 0xff)) {
 		x >>= 8;
 		r += 8;
 	}
 	if (!(x & 0xf)) {
 		x >>= 4;
 		r += 4;
 	}
 	if (!(x & 3)) {
 		x >>= 2;
 		r += 2;
 	}
 	if (!(x & 1)) {
 		x >>= 1;
 		r += 1;
 	}
 	return r;
 }

 /*
  * Every architecture must define this function. It's the fastest
  * way of searching a 140-bit bitmap where the first 100 bits are
  * unlikely to be set. It's guaranteed that at least one of the 140
  * bits is cleared.
  */
 static inline int sched_find_first_bit(unsigned long *b)
 {
 	if (unlikely(b[0]))
 		return __ffs(b[0]);
 	if (unlikely(b[1]))
 		return __ffs(b[1]) + 32;
 	if (unlikely(b[2]))
 		return __ffs(b[2]) + 64;
 	if (b[3])
 		return __ffs(b[3]) + 96;
 	return __ffs(b[4]) + 128;
 }

 /*
  * ffz = Find First Zero in word. Undefined if no zero exists,
  * so code should check against ~0UL first..
  */
 static __inline__ unsigned long ffz(unsigned long word)
 {
 	unsigned long result = 0;

 	while(word & 1) {
 		result++;
 		word >>= 1;
 	}
 	return result;
 }


 static __inline__ void set_bit(int nr, volatile unsigned long * addr)
 {
 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
 	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "d" (nr)
 	     : "%a0", "cc");
 #else
 	__asm__ __volatile__ ("bset %1,%0"
 	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "di" (nr)
 	     : "cc");
 #endif
 }

 #define __set_bit(nr, addr) set_bit(nr, addr)

 /*
  * clear_bit() doesn't provide any barrier for the compiler.
  */
 #define smp_mb__before_clear_bit()	barrier()
 #define smp_mb__after_clear_bit()	barrier()

 static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
 {
 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
 	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "d" (nr)
 	     : "%a0", "cc");
 #else
 	__asm__ __volatile__ ("bclr %1,%0"
 	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "di" (nr)
 	     : "cc");
 #endif
 }

 #define __clear_bit(nr, addr) clear_bit(nr, addr)

 static __inline__ void change_bit(int nr, volatile unsigned long * addr)
 {
 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
 	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "d" (nr)
 	     : "%a0", "cc");
 #else
 	__asm__ __volatile__ ("bchg %1,%0"
 	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "di" (nr)
 	     : "cc");
 #endif
 }

 #define __change_bit(nr, addr) change_bit(nr, addr)

 static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
 {
 	char retval;

 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "d" (nr)
 	     : "%a0");
 #else
 	__asm__ __volatile__ ("bset %2,%1; sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "di" (nr)
 	     /* No clobber */);
 #endif

 	return retval;
 }

 #define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)

 static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
 {
 	char retval;

 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "d" (nr)
 	     : "%a0");
 #else
 	__asm__ __volatile__ ("bclr %2,%1; sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "di" (nr)
 	     /* No clobber */);
 #endif

 	return retval;
 }

 #define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)

 static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
 {
 	char retval;

 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "d" (nr)
 	     : "%a0");
 #else
 	__asm__ __volatile__ ("bchg %2,%1; sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
 	     : "di" (nr)
 	     /* No clobber */);
 #endif

 	return retval;
 }

 #define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)

 /*
  * This routine doesn't need to be atomic.
  */
 static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
 {
 	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
 }

 static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
 {
 	int 	* a = (int *) addr;
 	int	mask;

 	a += nr >> 5;
 	mask = 1 << (nr & 0x1f);
 	return ((mask & *a) != 0);
 }

 #define test_bit(nr,addr) \
 (__builtin_constant_p(nr) ? \
  __constant_test_bit((nr),(addr)) : \
  __test_bit((nr),(addr)))

 #define find_first_zero_bit(addr, size) \
         find_next_zero_bit((addr), (size), 0)
 #define find_first_bit(addr, size) \
         find_next_bit((addr), (size), 0)

 static __inline__ int find_next_zero_bit (const void * addr, int size, int offset)
 {
 	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
 	unsigned long result = offset & ~31UL;
 	unsigned long tmp;

 	if (offset >= size)
 		return size;
 	size -= result;
 	offset &= 31UL;
 	if (offset) {
 		tmp = *(p++);
 		tmp |= ~0UL >> (32-offset);
 		if (size < 32)
 			goto found_first;
 		if (~tmp)
 			goto found_middle;
 		size -= 32;
 		result += 32;
 	}
 	while (size & ~31UL) {
 		if (~(tmp = *(p++)))
 			goto found_middle;
 		result += 32;
 		size -= 32;
 	}
 	if (!size)
 		return result;
 	tmp = *p;

 found_first:
 	tmp |= ~0UL >> size;
 found_middle:
 	return result + ffz(tmp);
 }

 /*
  * Find next one bit in a bitmap reasonably efficiently.
  */
 static __inline__ unsigned long find_next_bit(const unsigned long *addr,
 	unsigned long size, unsigned long offset)
 {
 	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
 	unsigned int result = offset & ~31UL;
 	unsigned int tmp;

 	if (offset >= size)
 		return size;
 	size -= result;
 	offset &= 31UL;
 	if (offset) {
 		tmp = *p++;
 		tmp &= ~0UL << offset;
 		if (size < 32)
 			goto found_first;
 		if (tmp)
 			goto found_middle;
 		size -= 32;
 		result += 32;
 	}
 	while (size >= 32) {
 		if ((tmp = *p++) != 0)
 			goto found_middle;
 		result += 32;
 		size -= 32;
 	}
 	if (!size)
 		return result;
 	tmp = *p;

 found_first:
 	tmp &= ~0UL >> (32 - size);
 	if (tmp == 0UL)        /* Are any bits set? */
 		return result + size; /* Nope. */
 found_middle:
 	return result + __ffs(tmp);
 }

 /*
  * hweightN: returns the hamming weight (i.e. the number
  * of bits set) of a N-bit word
  */

 #define hweight32(x) generic_hweight32(x)
 #define hweight16(x) generic_hweight16(x)
 #define hweight8(x) generic_hweight8(x)


 static __inline__ int ext2_set_bit(int nr, volatile void * addr)
 {
 	char retval;

 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
 	     : "d" (nr)
 	     : "%a0");
 #else
 	__asm__ __volatile__ ("bset %2,%1; sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
 	     : "di" (nr)
 	     /* No clobber */);
 #endif

 	return retval;
 }

 static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
 {
 	char retval;

 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
 	     : "d" (nr)
 	     : "%a0");
 #else
 	__asm__ __volatile__ ("bclr %2,%1; sne %0"
 	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
 	     : "di" (nr)
 	     /* No clobber */);
 #endif

 	return retval;
 }

 #define ext2_set_bit_atomic(lock, nr, addr)		\
 	({						\
 		int ret;				\
 		spin_lock(lock);			\
 		ret = ext2_set_bit((nr), (addr));	\
 		spin_unlock(lock);			\
 		ret;					\
 	})

 #define ext2_clear_bit_atomic(lock, nr, addr)		\
 	({						\
 		int ret;				\
 		spin_lock(lock);			\
 		ret = ext2_clear_bit((nr), (addr));	\
 		spin_unlock(lock);			\
 		ret;					\
 	})

 static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
 {
 	char retval;

 #ifdef CONFIG_COLDFIRE
 	__asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
 	     : "=d" (retval)
 	     : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
 	     : "%a0");
 #else
 	__asm__ __volatile__ ("btst %2,%1; sne %0"
 	     : "=d" (retval)
 	     : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
 	     /* No clobber */);
 #endif

 	return retval;
 }

 #define ext2_find_first_zero_bit(addr, size) \
         ext2_find_next_zero_bit((addr), (size), 0)

 static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
 {
 	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
 	unsigned long result = offset & ~31UL;
 	unsigned long tmp;

 	if (offset >= size)
 		return size;
 	size -= result;
 	offset &= 31UL;
 	if(offset) {
 		/* We hold the little endian value in tmp, but then the
 		 * shift is illegal. So we could keep a big endian value
 		 * in tmp, like this:
 		 *
 		 * tmp = __swab32(*(p++));
 		 * tmp |= ~0UL >> (32-offset);
 		 *
 		 * but this would decrease preformance, so we change the
 		 * shift:
 		 */
 		tmp = *(p++);
 		tmp |= __swab32(~0UL >> (32-offset));
 		if(size < 32)
 			goto found_first;
 		if(~tmp)
 			goto found_middle;
 		size -= 32;
 		result += 32;
 	}
 	while(size & ~31UL) {
 		if(~(tmp = *(p++)))
 			goto found_middle;
 		result += 32;
 		size -= 32;
 	}
 	if(!size)
 		return result;
 	tmp = *p;

 found_first:
 	/* tmp is little endian, so we would have to swab the shift,
 	 * see above. But then we have to swab tmp below for ffz, so
 	 * we might as well do this here.
 	 */
 	return result + ffz(__swab32(tmp) | (~0UL << size));
 found_middle:
 	return result + ffz(__swab32(tmp));
 }

 /* Bitmap functions for the minix filesystem.  */
 #define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
 #define minix_set_bit(nr,addr) set_bit(nr,addr)
 #define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
 #define minix_test_bit(nr,addr) test_bit(nr,addr)
 #define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)

 /**
  * hweightN - returns the hamming weight of a N-bit word
  * @x: the word to weigh
  *
  * The Hamming Weight of a number is the total number of bits set in it.
  */

 #define hweight32(x) generic_hweight32(x)
 #define hweight16(x) generic_hweight16(x)
 #define hweight8(x) generic_hweight8(x)

 #endif /* __KERNEL__ */

 /*
  * fls: find last bit set.
  */
 #define fls(x) generic_fls(x)

 #endif /* _M68KNOMMU_BITOPS_H */
	#ifndef _M68KNOMMU_BITOPS_H
	#define _M68KNOMMU_BITOPS_H

	/*
	* Copyright 1992, Linus Torvalds.
	*/

	#include <linux/config.h>
	#include <linux/compiler.h>
	#include <asm/byteorder.h> /* swab32 */
	#include <asm/system.h> /* save_flags */

	#ifdef __KERNEL__

	/*
	* Generic ffs().
	*/
	static inline int ffs(int x)
	{
	int r = 1;

	if (!x)
	return 0;
	if (!(x & 0xffff)) {
	x >>= 16;
	r += 16;
	}
	if (!(x & 0xff)) {
	x >>= 8;
	r += 8;
	}
	if (!(x & 0xf)) {
	x >>= 4;
	r += 4;
	}
	if (!(x & 3)) {
	x >>= 2;
	r += 2;
	}
	if (!(x & 1)) {
	x >>= 1;
	r += 1;
	}
	return r;
	}

	/*
	* Generic __ffs().
	*/
	static inline int __ffs(int x)
	{
	int r = 0;

	if (!x)
	return 0;
	if (!(x & 0xffff)) {
	x >>= 16;
	r += 16;
	}
	if (!(x & 0xff)) {
	x >>= 8;
	r += 8;
	}
	if (!(x & 0xf)) {
	x >>= 4;
	r += 4;
	}
	if (!(x & 3)) {
	x >>= 2;
	r += 2;
	}
	if (!(x & 1)) {
	x >>= 1;
	r += 1;
	}
	return r;
	}

	/*
	* Every architecture must define this function. It's the fastest
	* way of searching a 140-bit bitmap where the first 100 bits are
	* unlikely to be set. It's guaranteed that at least one of the 140
	* bits is cleared.
	*/
	static inline int sched_find_first_bit(unsigned long *b)
	{
	if (unlikely(b[0]))
	return __ffs(b[0]);
	if (unlikely(b[1]))
	return __ffs(b[1]) + 32;
	if (unlikely(b[2]))
	return __ffs(b[2]) + 64;
	if (b[3])
	return __ffs(b[3]) + 96;
	return __ffs(b[4]) + 128;
	}

	/*
	* ffz = Find First Zero in word. Undefined if no zero exists,
	* so code should check against ~0UL first..
	*/
	static __inline__ unsigned long ffz(unsigned long word)
	{
	unsigned long result = 0;

	while(word & 1) {
	result++;
	word >>= 1;
	}
	return result;
	}


	static __inline__ void set_bit(int nr, volatile unsigned long * addr)
	{
	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
	: "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "d" (nr)
	: "%a0", "cc");
	#else
	__asm__ __volatile__ ("bset %1,%0"
	: "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "di" (nr)
	: "cc");
	#endif
	}

	#define __set_bit(nr, addr) set_bit(nr, addr)

	/*
	* clear_bit() doesn't provide any barrier for the compiler.
	*/
	#define smp_mb__before_clear_bit() barrier()
	#define smp_mb__after_clear_bit() barrier()

	static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
	{
	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
	: "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "d" (nr)
	: "%a0", "cc");
	#else
	__asm__ __volatile__ ("bclr %1,%0"
	: "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "di" (nr)
	: "cc");
	#endif
	}

	#define __clear_bit(nr, addr) clear_bit(nr, addr)

	static __inline__ void change_bit(int nr, volatile unsigned long * addr)
	{
	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
	: "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "d" (nr)
	: "%a0", "cc");
	#else
	__asm__ __volatile__ ("bchg %1,%0"
	: "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "di" (nr)
	: "cc");
	#endif
	}

	#define __change_bit(nr, addr) change_bit(nr, addr)

	static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
	{
	char retval;

	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "d" (nr)
	: "%a0");
	#else
	__asm__ __volatile__ ("bset %2,%1; sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "di" (nr)
	/* No clobber */);
	#endif

	return retval;
	}

	#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)

	static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
	{
	char retval;

	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "d" (nr)
	: "%a0");
	#else
	__asm__ __volatile__ ("bclr %2,%1; sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "di" (nr)
	/* No clobber */);
	#endif

	return retval;
	}

	#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)

	static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
	{
	char retval;

	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "d" (nr)
	: "%a0");
	#else
	__asm__ __volatile__ ("bchg %2,%1; sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
	: "di" (nr)
	/* No clobber */);
	#endif

	return retval;
	}

	#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)

	/*
	* This routine doesn't need to be atomic.
	*/
	static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
	{
	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
	}

	static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
	{
	int * a = (int *) addr;
	int mask;

	a += nr >> 5;
	mask = 1 << (nr & 0x1f);
	return ((mask & *a) != 0);
	}

	#define test_bit(nr,addr) \
	(__builtin_constant_p(nr) ? \
	__constant_test_bit((nr),(addr)) : \
	__test_bit((nr),(addr)))

	#define find_first_zero_bit(addr, size) \
	find_next_zero_bit((addr), (size), 0)
	#define find_first_bit(addr, size) \
	find_next_bit((addr), (size), 0)

	static __inline__ int find_next_zero_bit (const void * addr, int size, int offset)
	{
	unsigned long p = ((unsigned long ) addr) + (offset >> 5);
	unsigned long result = offset & ~31UL;
	unsigned long tmp;

	if (offset >= size)
	return size;
	size -= result;
	offset &= 31UL;
	if (offset) {
	tmp = *(p++);
	tmp \|= ~0UL >> (32-offset);
	if (size < 32)
	goto found_first;
	if (~tmp)
	goto found_middle;
	size -= 32;
	result += 32;
	}
	while (size & ~31UL) {
	if (~(tmp = *(p++)))
	goto found_middle;
	result += 32;
	size -= 32;
	}
	if (!size)
	return result;
	tmp = *p;

	found_first:
	tmp \|= ~0UL >> size;
	found_middle:
	return result + ffz(tmp);
	}

	/*
	* Find next one bit in a bitmap reasonably efficiently.
	*/
	static __inline__ unsigned long find_next_bit(const unsigned long *addr,
	unsigned long size, unsigned long offset)
	{
	unsigned int p = ((unsigned int ) addr) + (offset >> 5);
	unsigned int result = offset & ~31UL;
	unsigned int tmp;

	if (offset >= size)
	return size;
	size -= result;
	offset &= 31UL;
	if (offset) {
	tmp = *p++;
	tmp &= ~0UL << offset;
	if (size < 32)
	goto found_first;
	if (tmp)
	goto found_middle;
	size -= 32;
	result += 32;
	}
	while (size >= 32) {
	if ((tmp = *p++) != 0)
	goto found_middle;
	result += 32;
	size -= 32;
	}
	if (!size)
	return result;
	tmp = *p;

	found_first:
	tmp &= ~0UL >> (32 - size);
	if (tmp == 0UL) /* Are any bits set? */
	return result + size; /* Nope. */
	found_middle:
	return result + __ffs(tmp);
	}

	/*
	* hweightN: returns the hamming weight (i.e. the number
	* of bits set) of a N-bit word
	*/

	#define hweight32(x) generic_hweight32(x)
	#define hweight16(x) generic_hweight16(x)
	#define hweight8(x) generic_hweight8(x)


	static __inline__ int ext2_set_bit(int nr, volatile void * addr)
	{
	char retval;

	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
	: "d" (nr)
	: "%a0");
	#else
	__asm__ __volatile__ ("bset %2,%1; sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
	: "di" (nr)
	/* No clobber */);
	#endif

	return retval;
	}

	static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
	{
	char retval;

	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
	: "d" (nr)
	: "%a0");
	#else
	__asm__ __volatile__ ("bclr %2,%1; sne %0"
	: "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
	: "di" (nr)
	/* No clobber */);
	#endif

	return retval;
	}

	#define ext2_set_bit_atomic(lock, nr, addr) \
	({ \
	int ret; \
	spin_lock(lock); \
	ret = ext2_set_bit((nr), (addr)); \
	spin_unlock(lock); \
	ret; \
	})

	#define ext2_clear_bit_atomic(lock, nr, addr) \
	({ \
	int ret; \
	spin_lock(lock); \
	ret = ext2_clear_bit((nr), (addr)); \
	spin_unlock(lock); \
	ret; \
	})

	static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
	{
	char retval;

	#ifdef CONFIG_COLDFIRE
	__asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
	: "=d" (retval)
	: "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
	: "%a0");
	#else
	__asm__ __volatile__ ("btst %2,%1; sne %0"
	: "=d" (retval)
	: "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
	/* No clobber */);
	#endif

	return retval;
	}

	#define ext2_find_first_zero_bit(addr, size) \
	ext2_find_next_zero_bit((addr), (size), 0)

	static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
	{
	unsigned long p = ((unsigned long ) addr) + (offset >> 5);
	unsigned long result = offset & ~31UL;
	unsigned long tmp;

	if (offset >= size)
	return size;
	size -= result;
	offset &= 31UL;
	if(offset) {
	/* We hold the little endian value in tmp, but then the
	* shift is illegal. So we could keep a big endian value
	* in tmp, like this:
	*
	* tmp = __swab32(*(p++));
	* tmp \|= ~0UL >> (32-offset);
	*
	* but this would decrease preformance, so we change the
	* shift:
	*/
	tmp = *(p++);
	tmp \|= __swab32(~0UL >> (32-offset));
	if(size < 32)
	goto found_first;
	if(~tmp)
	goto found_middle;
	size -= 32;
	result += 32;
	}
	while(size & ~31UL) {
	if(~(tmp = *(p++)))
	goto found_middle;
	result += 32;
	size -= 32;
	}
	if(!size)
	return result;
	tmp = *p;

	found_first:
	/* tmp is little endian, so we would have to swab the shift,
	* see above. But then we have to swab tmp below for ffz, so
	* we might as well do this here.
	*/
	return result + ffz(__swab32(tmp) \| (~0UL << size));
	found_middle:
	return result + ffz(__swab32(tmp));
	}

	/* Bitmap functions for the minix filesystem. */
	#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
	#define minix_set_bit(nr,addr) set_bit(nr,addr)
	#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
	#define minix_test_bit(nr,addr) test_bit(nr,addr)
	#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)

	/**
	* hweightN - returns the hamming weight of a N-bit word
	* @x: the word to weigh
	*
	* The Hamming Weight of a number is the total number of bits set in it.
	*/

	#define hweight32(x) generic_hweight32(x)
	#define hweight16(x) generic_hweight16(x)
	#define hweight8(x) generic_hweight8(x)

	#endif /* __KERNEL__ */

	/*
	* fls: find last bit set.
	*/
	#define fls(x) generic_fls(x)

	#endif /* _M68KNOMMU_BITOPS_H */