| /* |
| * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef __WIL6210_FTM_H__ |
| #define __WIL6210_FTM_H__ |
| |
| /** |
| * NOTE: The authoritative place for definition of QCA_NL80211_VENDOR_ID, |
| * vendor subcmd definitions prefixed with QCA_NL80211_VENDOR_SUBCMD, and |
| * qca_wlan_vendor_attr is open source file src/common/qca-vendor.h in |
| * git://w1.fi/srv/git/hostap.git; the values here are just a copy of that |
| */ |
| |
| /** |
| * enum qca_vendor_attr_loc - attributes for FTM and AOA commands |
| * |
| * @QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE: Session cookie, specified in |
| * %QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. It will be provided by driver |
| * events and can be used to identify events targeted for this session. |
| * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA: Nested attribute containing extra |
| * FTM/AOA capabilities, returned by %QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA. |
| * see %enum qca_wlan_vendor_attr_loc_capa. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS: array of nested attributes |
| * containing information about each peer in measurement session |
| * request. See %enum qca_wlan_vendor_attr_peer_info for supported |
| * attributes for each peer |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RESULTS: nested attribute containing |
| * measurement results for a peer. reported by the |
| * %QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event. |
| * See %enum qca_wlan_vendor_attr_peer_result for list of supported |
| * attributes. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE: flag attribute for |
| * enabling or disabling responder functionality. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_LCI: used in the |
| * %QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER command in order to |
| * specify the LCI report that will be sent by the responder during |
| * a measurement exchange. The format is defined in IEEE P802.11-REVmc/D5.0, |
| * 9.4.2.22.10 |
| * @QCA_WLAN_VENDOR_ATTR_FTM_LCR: provided with the |
| * %QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER command in order to |
| * specify the location civic report that will be sent by the responder during |
| * a measurement exchange. The format is defined in IEEE P802.11-REVmc/D5.0, |
| * 9.4.2.22.13 |
| * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS: session/measurement completion |
| * status code, reported in %QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE |
| * and %QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT |
| * @QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN: initial dialog token used |
| * by responder (0 if not specified) |
| * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE: AOA measurement type. Requested in |
| * %QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS and optionally in |
| * %QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if AOA measurements |
| * are needed as part of an FTM session. |
| * Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. |
| * See enum qca_wlan_vendor_attr_aoa_type. |
| * @QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK: bit mask indicating |
| * which antenna arrays were used in location measurement. |
| * Reported in %QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and |
| * %QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT |
| * @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT: AOA measurement data. |
| * Its contents depends on the AOA type and antenna array mask: |
| * %QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values, |
| * phase of the strongest CIR path for each antenna in the measured |
| * array(s). |
| * %QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16 |
| * values, phase and amplitude of the strongest CIR path for each |
| * antenna in the measured array(s) |
| * @QCA_WLAN_VENDOR_ATTR_FREQ: Frequency where peer is listening, in MHz. |
| * Unsigned 32 bit value. |
| */ |
| enum qca_wlan_vendor_attr_loc { |
| /* we reuse these attributes */ |
| QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6, |
| QCA_WLAN_VENDOR_ATTR_PAD = 13, |
| QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14, |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17, |
| QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18, |
| QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19, |
| QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20, |
| QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21, |
| QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22, |
| QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23, |
| QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24, |
| QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25, |
| QCA_WLAN_VENDOR_ATTR_FREQ = 26, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_LOC_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_LOC_MAX = QCA_WLAN_VENDOR_ATTR_LOC_AFTER_LAST - 1, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_loc_capa - indoor location capabilities |
| * |
| * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: various flags. See |
| * %enum qca_wlan_vendor_attr_loc_capa_flags |
| * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number |
| * of measurement sessions that can run concurrently. |
| * Default is one session (no session concurrency) |
| * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique |
| * peers that are supported in running sessions. For example, |
| * if the value is 8 and maximum number of sessions is 2, you can |
| * have one session with 8 unique peers, or 2 sessions with 4 unique |
| * peers each, and so on. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number |
| * of bursts per peer, as an exponent (2^value). Default is 0, |
| * meaning no multi-burst support. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number |
| * of measurement exchanges allowed in a single burst |
| * @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement |
| * types. A bit mask (unsigned 32 bit value), each bit corresponds |
| * to an AOA type as defined by %enum qca_vendor_attr_aoa_type. |
| */ |
| enum qca_wlan_vendor_attr_loc_capa { |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID, |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS, |
| QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS, |
| QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS, |
| QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP, |
| QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST, |
| QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX = |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags |
| * |
| * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver |
| * can be configured as an FTM responder (for example, an AP that |
| * services FTM requests). %QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER |
| * will be supported if set. |
| * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver |
| * can run FTM sessions. %QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION |
| * will be supported if set. |
| * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder |
| * supports immediate (ASAP) response. |
| * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone |
| * AOA measurement using %QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS |
| * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports |
| * requesting AOA measurements as part of an FTM session. |
| */ |
| enum qca_wlan_vendor_attr_loc_capa_flags { |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0, |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1, |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2, |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3, |
| QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_peer_info: information about |
| * a single peer in a measurement session. |
| * |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related |
| * to measurement. See %enum qca_wlan_vendor_attr_ftm_peer_meas_flags. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of |
| * FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0, |
| * 9.4.2.167. See %enum qca_wlan_vendor_attr_ftm_meas_param for |
| * list of supported attributes. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for |
| * secure measurement |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA |
| * measurement every _value_ bursts. If 0 or not specified, |
| * AOA measurements will be disabled for this peer. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ: Frequency in MHz where |
| * peer is listening. Optional; if not specified, use the |
| * entry from the kernel scan results cache. |
| */ |
| enum qca_wlan_vendor_attr_ftm_peer_info { |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX = |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags, |
| * per-peer |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request |
| * immediate (ASAP) response from peer |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request |
| * LCI report from peer. The LCI report includes the absolute |
| * location of the peer in "official" coordinates (similar to GPS). |
| * See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request |
| * Location civic report from peer. The LCR includes the location |
| * of the peer in free-form format. See IEEE P802.11-REVmc/D7.0, |
| * 11.24.6.7 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set, |
| * request a secure measurement. |
| * %QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided. |
| */ |
| enum qca_wlan_vendor_attr_ftm_peer_meas_flags { |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters |
| * |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements |
| * to perform in a single burst. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to |
| * perform, specified as an exponent (2^value) |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst |
| * instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167 |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts, |
| * as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must |
| * be larger than %QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION |
| */ |
| enum qca_wlan_vendor_attr_ftm_meas_param { |
| QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID, |
| QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST, |
| QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP, |
| QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION, |
| QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX = |
| QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results |
| * |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported |
| * peer |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement |
| * request for this peer. |
| * See %enum qca_wlan_vendor_attr_ftm_peer_result_status |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related |
| * to measurement results for this peer. |
| * See %enum qca_wlan_vendor_attr_ftm_peer_result_flags |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when |
| * request failed and peer requested not to send an additional request |
| * for this number of seconds. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received |
| * from peer. In the format specified by IEEE P802.11-REVmc/D7.0, |
| * 9.4.2.22.10 |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when |
| * received from peer.In the format specified by IEEE P802.11-REVmc/D7.0, |
| * 9.4.2.22.13 |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer |
| * overridden some measurement request parameters. See |
| * enum qca_wlan_vendor_attr_ftm_meas_param. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement |
| * for this peer. Same contents as %QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement |
| * results. Each entry is a nested attribute defined |
| * by enum qca_wlan_vendor_attr_ftm_meas. |
| */ |
| enum qca_wlan_vendor_attr_ftm_peer_result { |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX = |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_ftm_peer_result_status |
| * |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results |
| * will be provided. Peer may have overridden some measurement parameters, |
| * in which case overridden parameters will be report by |
| * %QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS attribute |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable |
| * of performing the measurement request. No more results will be sent |
| * for this peer in this session. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request |
| * failed, and requested not to send an additional request for number |
| * of seconds specified by %QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS |
| * attribute. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation |
| * failed. Request was not sent over the air. |
| */ |
| enum qca_wlan_vendor_attr_ftm_peer_result_status { |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED, |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_ftm_peer_result_flags : Various flags |
| * for measurement result, per-peer |
| * |
| * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set, |
| * measurement completed for this peer. No more results will be reported |
| * for this peer in this session. |
| */ |
| enum qca_wlan_vendor_attr_ftm_peer_result_flags { |
| QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0, |
| }; |
| |
| /** |
| * enum qca_vendor_attr_loc_session_status: Session completion status code |
| * |
| * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed |
| * successfully. |
| * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted |
| * by request |
| * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request |
| * was invalid and was not started |
| * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error |
| * and did not complete normally (for example out of resources) |
| * |
| */ |
| enum qca_vendor_attr_loc_session_status { |
| QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK, |
| QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED, |
| QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID, |
| QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_ftm_meas: Single measurement data |
| * |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure(TOD) of FTM packet as |
| * recorded by responder, in picoseconds. |
| * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival(TOA) of FTM packet at |
| * initiator, in picoseconds. |
| * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by |
| * initiator, in picoseconds. |
| * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at |
| * responder, in picoseconds. |
| * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded |
| * during this measurement exchange. Optional and will be provided if |
| * the hardware can measure it. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by |
| * responder. Not always provided. |
| * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by |
| * responder. Not always provided. |
| * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by |
| * initiator. Not always provided. |
| * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by |
| * initiator. Not always provided. |
| * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. |
| * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding. |
| */ |
| enum qca_wlan_vendor_attr_ftm_meas { |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD, |
| /* keep last */ |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST, |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX = |
| QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1, |
| }; |
| |
| /** |
| * enum qca_wlan_vendor_attr_aoa_type: AOA measurement type |
| * |
| * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest |
| * CIR (channel impulse response) path for each antenna. |
| * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude |
| * of the strongest CIR path for each antenna. |
| */ |
| enum qca_wlan_vendor_attr_aoa_type { |
| QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE, |
| QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP, |
| QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX, |
| }; |
| |
| /* vendor event indices, used from both cfg80211.c and ftm.c */ |
| enum qca_nl80211_vendor_events_index { |
| QCA_NL80211_VENDOR_EVENT_FTM_MEAS_RESULT_INDEX, |
| QCA_NL80211_VENDOR_EVENT_FTM_SESSION_DONE_INDEX, |
| QCA_NL80211_VENDOR_EVENT_AOA_MEAS_RESULT_INDEX, |
| }; |
| |
| /* measurement parameters. Specified for each peer as part |
| * of measurement request, or provided with measurement |
| * results for peer in case peer overridden parameters |
| */ |
| struct wil_ftm_meas_params { |
| u8 meas_per_burst; |
| u8 num_of_bursts_exp; |
| u8 burst_duration; |
| u16 burst_period; |
| }; |
| |
| /* measurement request for a single peer */ |
| struct wil_ftm_meas_peer_info { |
| u8 mac_addr[ETH_ALEN]; |
| u32 freq; |
| u32 flags; /* enum qca_wlan_vendor_attr_ftm_peer_meas_flags */ |
| struct wil_ftm_meas_params params; |
| u8 secure_token_id; |
| }; |
| |
| /* session request, passed to wil_ftm_cfg80211_start_session */ |
| struct wil_ftm_session_request { |
| u64 session_cookie; |
| u32 n_peers; |
| /* keep last, variable size according to n_peers */ |
| struct wil_ftm_meas_peer_info peers[0]; |
| }; |
| |
| /* single measurement for a peer */ |
| struct wil_ftm_peer_meas { |
| u64 t1, t2, t3, t4; |
| }; |
| |
| /* measurement results for a single peer */ |
| struct wil_ftm_peer_meas_res { |
| u8 mac_addr[ETH_ALEN]; |
| u32 flags; /* enum qca_wlan_vendor_attr_ftm_peer_result_flags */ |
| u8 status; /* enum qca_wlan_vendor_attr_ftm_peer_result_status */ |
| u8 value_seconds; |
| bool has_params; /* true if params is valid */ |
| struct wil_ftm_meas_params params; /* peer overridden params */ |
| u8 *lci; |
| u8 lci_length; |
| u8 *lcr; |
| u8 lcr_length; |
| u32 n_meas; |
| /* keep last, variable size according to n_meas */ |
| struct wil_ftm_peer_meas meas[0]; |
| }; |
| |
| /* standalone AOA measurement request */ |
| struct wil_aoa_meas_request { |
| u8 mac_addr[ETH_ALEN]; |
| u32 freq; |
| u32 type; |
| }; |
| |
| /* AOA measurement result */ |
| struct wil_aoa_meas_result { |
| u8 mac_addr[ETH_ALEN]; |
| u32 type; |
| u32 antenna_array_mask; |
| u32 status; |
| u32 length; |
| /* keep last, variable size according to length */ |
| u8 data[0]; |
| }; |
| |
| /* private data related to FTM. Part of the wil6210_priv structure */ |
| struct wil_ftm_priv { |
| struct mutex lock; /* protects the FTM data */ |
| u8 session_started; |
| u64 session_cookie; |
| struct wil_ftm_peer_meas_res *ftm_res; |
| u8 has_ftm_res; |
| u32 max_ftm_meas; |
| |
| /* standalone AOA measurement */ |
| u8 aoa_started; |
| u8 aoa_peer_mac_addr[ETH_ALEN]; |
| u32 aoa_type; |
| struct timer_list aoa_timer; |
| struct work_struct aoa_timeout_work; |
| }; |
| |
| int wil_ftm_get_capabilities(struct wiphy *wiphy, struct wireless_dev *wdev, |
| const void *data, int data_len); |
| int wil_ftm_start_session(struct wiphy *wiphy, struct wireless_dev *wdev, |
| const void *data, int data_len); |
| int wil_ftm_abort_session(struct wiphy *wiphy, struct wireless_dev *wdev, |
| const void *data, int data_len); |
| int wil_ftm_configure_responder(struct wiphy *wiphy, struct wireless_dev *wdev, |
| const void *data, int data_len); |
| int wil_aoa_start_measurement(struct wiphy *wiphy, struct wireless_dev *wdev, |
| const void *data, int data_len); |
| int wil_aoa_abort_measurement(struct wiphy *wiphy, struct wireless_dev *wdev, |
| const void *data, int data_len); |
| |
| #endif /* __WIL6210_FTM_H__ */ |