drivers/leds/leds-ss4200.c - kernel/msm-4.9 - Gitiles

 /*
  * SS4200-E Hardware API
  * Copyright (c) 2009, Intel Corporation.
  * Copyright IBM Corporation, 2009
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  *
  * Author: Dave Hansen <dave@sr71.net>
  */

 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

 #include <linux/dmi.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>

 MODULE_AUTHOR("Rodney Girod <rgirod@confocus.com>, Dave Hansen <dave@sr71.net>");
 MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver");
 MODULE_LICENSE("GPL");

 /*
  * ICH7 LPC/GPIO PCI Config register offsets
  */
 #define PMBASE		0x040
 #define GPIO_BASE	0x048
 #define GPIO_CTRL	0x04c
 #define GPIO_EN		0x010

 /*
  * The ICH7 GPIO register block is 64 bytes in size.
  */
 #define ICH7_GPIO_SIZE	64

 /*
  * Define register offsets within the ICH7 register block.
  */
 #define GPIO_USE_SEL	0x000
 #define GP_IO_SEL	0x004
 #define GP_LVL		0x00c
 #define GPO_BLINK	0x018
 #define GPI_INV		0x030
 #define GPIO_USE_SEL2	0x034
 #define GP_IO_SEL2	0x038
 #define GP_LVL2		0x03c

 /*
  * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
  */
 static const struct pci_device_id ich7_lpc_pci_id[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
 	{ } /* NULL entry */
 };

 MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id);

 static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
 {
 	pr_info("detected '%s'\n", id->ident);
 	return 1;
 }

 static bool nodetect;
 module_param_named(nodetect, nodetect, bool, 0);
 MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");

 /*
  * struct nas_led_whitelist - List of known good models
  *
  * Contains the known good models this driver is compatible with.
  * When adding a new model try to be as strict as possible. This
  * makes it possible to keep the false positives (the model is
  * detected as working, but in reality it is not) as low as
  * possible.
  */
 static struct dmi_system_id nas_led_whitelist[] __initdata = {
 	{
 		.callback = ss4200_led_dmi_callback,
 		.ident = "Intel SS4200-E",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"),
 			DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
 		}
 	},
 	{}
 };

 /*
  * Base I/O address assigned to the Power Management register block
  */
 static u32 g_pm_io_base;

 /*
  * Base I/O address assigned to the ICH7 GPIO register block
  */
 static u32 nas_gpio_io_base;

 /*
  * When we successfully register a region, we are returned a resource.
  * We use these to identify which regions we need to release on our way
  * back out.
  */
 static struct resource *gp_gpio_resource;

 struct nasgpio_led {
 	char *name;
 	u32 gpio_bit;
 	struct led_classdev led_cdev;
 };

 /*
  * gpio_bit(s) are the ICH7 GPIO bit assignments
  */
 static struct nasgpio_led nasgpio_leds[] = {
 	{ .name = "hdd1:blue:sata",	.gpio_bit = 0 },
 	{ .name = "hdd1:amber:sata",	.gpio_bit = 1 },
 	{ .name = "hdd2:blue:sata",	.gpio_bit = 2 },
 	{ .name = "hdd2:amber:sata",	.gpio_bit = 3 },
 	{ .name = "hdd3:blue:sata",	.gpio_bit = 4 },
 	{ .name = "hdd3:amber:sata",	.gpio_bit = 5 },
 	{ .name = "hdd4:blue:sata",	.gpio_bit = 6 },
 	{ .name = "hdd4:amber:sata",	.gpio_bit = 7 },
 	{ .name = "power:blue:power",	.gpio_bit = 27},
 	{ .name = "power:amber:power",  .gpio_bit = 28},
 };

 #define NAS_RECOVERY	0x00000400	/* GPIO10 */

 static struct nasgpio_led *
 led_classdev_to_nasgpio_led(struct led_classdev *led_cdev)
 {
 	return container_of(led_cdev, struct nasgpio_led, led_cdev);
 }

 static struct nasgpio_led *get_led_named(char *name)
 {
 	int i;
 	for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
 		if (strcmp(nasgpio_leds[i].name, name))
 			continue;
 		return &nasgpio_leds[i];
 	}
 	return NULL;
 }

 /*
  * This protects access to the gpio ports.
  */
 static DEFINE_SPINLOCK(nasgpio_gpio_lock);

 /*
  * There are two gpio ports, one for blinking and the other
  * for power.  @port tells us if we're doing blinking or
  * power control.
  *
  * Caller must hold nasgpio_gpio_lock
  */
 static void __nasgpio_led_set_attr(struct led_classdev *led_cdev,
 				   u32 port, u32 value)
 {
 	struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
 	u32 gpio_out;

 	gpio_out = inl(nas_gpio_io_base + port);
 	if (value)
 		gpio_out |= (1<<led->gpio_bit);
 	else
 		gpio_out &= ~(1<<led->gpio_bit);

 	outl(gpio_out, nas_gpio_io_base + port);
 }

 static void nasgpio_led_set_attr(struct led_classdev *led_cdev,
 				 u32 port, u32 value)
 {
 	spin_lock(&nasgpio_gpio_lock);
 	__nasgpio_led_set_attr(led_cdev, port, value);
 	spin_unlock(&nasgpio_gpio_lock);
 }

 static u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port)
 {
 	struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
 	u32 gpio_in;

 	spin_lock(&nasgpio_gpio_lock);
 	gpio_in = inl(nas_gpio_io_base + port);
 	spin_unlock(&nasgpio_gpio_lock);
 	if (gpio_in & (1<<led->gpio_bit))
 		return 1;
 	return 0;
 }

 /*
  * There is actual brightness control in the hardware,
  * but it is via smbus commands and not implemented
  * in this driver.
  */
 static void nasgpio_led_set_brightness(struct led_classdev *led_cdev,
 				       enum led_brightness brightness)
 {
 	u32 setting = 0;
 	if (brightness >= LED_HALF)
 		setting = 1;
 	/*
 	 * Hold the lock across both operations.  This ensures
 	 * consistency so that both the "turn off blinking"
 	 * and "turn light off" operations complete as a set.
 	 */
 	spin_lock(&nasgpio_gpio_lock);
 	/*
 	 * LED class documentation asks that past blink state
 	 * be disabled when brightness is turned to zero.
 	 */
 	if (brightness == 0)
 		__nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0);
 	__nasgpio_led_set_attr(led_cdev, GP_LVL, setting);
 	spin_unlock(&nasgpio_gpio_lock);
 }

 static int nasgpio_led_set_blink(struct led_classdev *led_cdev,
 				 unsigned long *delay_on,
 				 unsigned long *delay_off)
 {
 	u32 setting = 1;
 	if (!(*delay_on == 0 && *delay_off == 0) &&
 	    !(*delay_on == 500 && *delay_off == 500))
 		return -EINVAL;
 	/*
 	 * These are very approximate.
 	 */
 	*delay_on = 500;
 	*delay_off = 500;

 	nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting);

 	return 0;
 }


 /*
  * Initialize the ICH7 GPIO registers for NAS usage.  The BIOS should have
  * already taken care of this, but we will do so in a non destructive manner
  * so that we have what we need whether the BIOS did it or not.
  */
 static int ich7_gpio_init(struct device *dev)
 {
 	int i;
 	u32 config_data = 0;
 	u32 all_nas_led = 0;

 	for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
 		all_nas_led |= (1<<nasgpio_leds[i].gpio_bit);

 	spin_lock(&nasgpio_gpio_lock);
 	/*
 	 * We need to enable all of the GPIO lines used by the NAS box,
 	 * so we will read the current Use Selection and add our usage
 	 * to it.  This should be benign with regard to the original
 	 * BIOS configuration.
 	 */
 	config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
 	dev_dbg(dev, ": Data read from GPIO_USE_SEL = 0x%08x\n", config_data);
 	config_data |= all_nas_led + NAS_RECOVERY;
 	outl(config_data, nas_gpio_io_base + GPIO_USE_SEL);
 	config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
 	dev_dbg(dev, ": GPIO_USE_SEL = 0x%08x\n\n", config_data);

 	/*
 	 * The LED GPIO outputs need to be configured for output, so we
 	 * will ensure that all LED lines are cleared for output and the
 	 * RECOVERY line ready for input.  This too should be benign with
 	 * regard to BIOS configuration.
 	 */
 	config_data = inl(nas_gpio_io_base + GP_IO_SEL);
 	dev_dbg(dev, ": Data read from GP_IO_SEL = 0x%08x\n",
 					config_data);
 	config_data &= ~all_nas_led;
 	config_data |= NAS_RECOVERY;
 	outl(config_data, nas_gpio_io_base + GP_IO_SEL);
 	config_data = inl(nas_gpio_io_base + GP_IO_SEL);
 	dev_dbg(dev, ": GP_IO_SEL = 0x%08x\n", config_data);

 	/*
 	 * In our final system, the BIOS will initialize the state of all
 	 * of the LEDs.  For now, we turn them all off (or Low).
 	 */
 	config_data = inl(nas_gpio_io_base + GP_LVL);
 	dev_dbg(dev, ": Data read from GP_LVL = 0x%08x\n", config_data);
 	/*
 	 * In our final system, the BIOS will initialize the blink state of all
 	 * of the LEDs.  For now, we turn blink off for all of them.
 	 */
 	config_data = inl(nas_gpio_io_base + GPO_BLINK);
 	dev_dbg(dev, ": Data read from GPO_BLINK = 0x%08x\n", config_data);

 	/*
 	 * At this moment, I am unsure if anything needs to happen with GPI_INV
 	 */
 	config_data = inl(nas_gpio_io_base + GPI_INV);
 	dev_dbg(dev, ": Data read from GPI_INV = 0x%08x\n", config_data);

 	spin_unlock(&nasgpio_gpio_lock);
 	return 0;
 }

 static void ich7_lpc_cleanup(struct device *dev)
 {
 	/*
 	 * If we were given exclusive use of the GPIO
 	 * I/O Address range, we must return it.
 	 */
 	if (gp_gpio_resource) {
 		dev_dbg(dev, ": Releasing GPIO I/O addresses\n");
 		release_region(nas_gpio_io_base, ICH7_GPIO_SIZE);
 		gp_gpio_resource = NULL;
 	}
 }

 /*
  * The OS has determined that the LPC of the Intel ICH7 Southbridge is present
  * so we can retrive the required operational information and prepare the GPIO.
  */
 static struct pci_dev *nas_gpio_pci_dev;
 static int ich7_lpc_probe(struct pci_dev *dev,
 				    const struct pci_device_id *id)
 {
 	int status;
 	u32 gc = 0;

 	status = pci_enable_device(dev);
 	if (status) {
 		dev_err(&dev->dev, "pci_enable_device failed\n");
 		return -EIO;
 	}

 	nas_gpio_pci_dev = dev;
 	status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base);
 	if (status)
 		goto out;
 	g_pm_io_base &= 0x00000ff80;

 	status = pci_read_config_dword(dev, GPIO_CTRL, &gc);
 	if (!(GPIO_EN & gc)) {
 		status = -EEXIST;
 		dev_info(&dev->dev,
 			   "ERROR: The LPC GPIO Block has not been enabled.\n");
 		goto out;
 	}

 	status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base);
 	if (0 > status) {
 		dev_info(&dev->dev, "Unable to read GPIOBASE.\n");
 		goto out;
 	}
 	dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base);
 	nas_gpio_io_base &= 0x00000ffc0;

 	/*
 	 * Insure that we have exclusive access to the GPIO I/O address range.
 	 */
 	gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE,
 					  KBUILD_MODNAME);
 	if (NULL == gp_gpio_resource) {
 		dev_info(&dev->dev,
 			 "ERROR Unable to register GPIO I/O addresses.\n");
 		status = -1;
 		goto out;
 	}

 	/*
 	 * Initialize the GPIO for NAS/Home Server Use
 	 */
 	ich7_gpio_init(&dev->dev);

 out:
 	if (status) {
 		ich7_lpc_cleanup(&dev->dev);
 		pci_disable_device(dev);
 	}
 	return status;
 }

 static void ich7_lpc_remove(struct pci_dev *dev)
 {
 	ich7_lpc_cleanup(&dev->dev);
 	pci_disable_device(dev);
 }

 /*
  * pci_driver structure passed to the PCI modules
  */
 static struct pci_driver nas_gpio_pci_driver = {
 	.name = KBUILD_MODNAME,
 	.id_table = ich7_lpc_pci_id,
 	.probe = ich7_lpc_probe,
 	.remove = ich7_lpc_remove,
 };

 static struct led_classdev *get_classdev_for_led_nr(int nr)
 {
 	struct nasgpio_led *nas_led = &nasgpio_leds[nr];
 	struct led_classdev *led = &nas_led->led_cdev;
 	return led;
 }


 static void set_power_light_amber_noblink(void)
 {
 	struct nasgpio_led *amber = get_led_named("power:amber:power");
 	struct nasgpio_led *blue = get_led_named("power:blue:power");

 	if (!amber || !blue)
 		return;
 	/*
 	 * LED_OFF implies disabling future blinking
 	 */
 	pr_debug("setting blue off and amber on\n");

 	nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF);
 	nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL);
 }

 static ssize_t nas_led_blink_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led = dev_get_drvdata(dev);
 	int blinking = 0;
 	if (nasgpio_led_get_attr(led, GPO_BLINK))
 		blinking = 1;
 	return sprintf(buf, "%u\n", blinking);
 }

 static ssize_t nas_led_blink_store(struct device *dev,
 				   struct device_attribute *attr,
 				   const char *buf, size_t size)
 {
 	int ret;
 	struct led_classdev *led = dev_get_drvdata(dev);
 	unsigned long blink_state;

 	ret = kstrtoul(buf, 10, &blink_state);
 	if (ret)
 		return ret;

 	nasgpio_led_set_attr(led, GPO_BLINK, blink_state);

 	return size;
 }

 static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store);

 static struct attribute *nasgpio_led_attrs[] = {
 	&dev_attr_blink.attr,
 	NULL
 };
 ATTRIBUTE_GROUPS(nasgpio_led);

 static int register_nasgpio_led(int led_nr)
 {
 	int ret;
 	struct nasgpio_led *nas_led = &nasgpio_leds[led_nr];
 	struct led_classdev *led = get_classdev_for_led_nr(led_nr);

 	led->name = nas_led->name;
 	led->brightness = LED_OFF;
 	if (nasgpio_led_get_attr(led, GP_LVL))
 		led->brightness = LED_FULL;
 	led->brightness_set = nasgpio_led_set_brightness;
 	led->blink_set = nasgpio_led_set_blink;
 	led->groups = nasgpio_led_groups;
 	ret = led_classdev_register(&nas_gpio_pci_dev->dev, led);
 	if (ret)
 		return ret;

 	return 0;
 }

 static void unregister_nasgpio_led(int led_nr)
 {
 	struct led_classdev *led = get_classdev_for_led_nr(led_nr);
 	led_classdev_unregister(led);
 }
 /*
  * module load/initialization
  */
 static int __init nas_gpio_init(void)
 {
 	int i;
 	int ret = 0;
 	int nr_devices = 0;

 	nr_devices = dmi_check_system(nas_led_whitelist);
 	if (nodetect) {
 		pr_info("skipping hardware autodetection\n");
 		pr_info("Please send 'dmidecode' output to dave@sr71.net\n");
 		nr_devices++;
 	}

 	if (nr_devices <= 0) {
 		pr_info("no LED devices found\n");
 		return -ENODEV;
 	}

 	pr_info("registering PCI driver\n");
 	ret = pci_register_driver(&nas_gpio_pci_driver);
 	if (ret)
 		return ret;
 	for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
 		ret = register_nasgpio_led(i);
 		if (ret)
 			goto out_err;
 	}
 	/*
 	 * When the system powers on, the BIOS leaves the power
 	 * light blue and blinking.  This will turn it solid
 	 * amber once the driver is loaded.
 	 */
 	set_power_light_amber_noblink();
 	return 0;
 out_err:
 	for (i--; i >= 0; i--)
 		unregister_nasgpio_led(i);
 	pci_unregister_driver(&nas_gpio_pci_driver);
 	return ret;
 }

 /*
  * module unload
  */
 static void __exit nas_gpio_exit(void)
 {
 	int i;
 	pr_info("Unregistering driver\n");
 	for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
 		unregister_nasgpio_led(i);
 	pci_unregister_driver(&nas_gpio_pci_driver);
 }

 module_init(nas_gpio_init);
 module_exit(nas_gpio_exit);
	/*
	* SS4200-E Hardware API
	* Copyright (c) 2009, Intel Corporation.
	* Copyright IBM Corporation, 2009
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
	*
	* Author: Dave Hansen <dave@sr71.net>
	*/

	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

	#include <linux/dmi.h>
	#include <linux/init.h>
	#include <linux/ioport.h>
	#include <linux/kernel.h>
	#include <linux/leds.h>
	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/types.h>
	#include <linux/uaccess.h>

	MODULE_AUTHOR("Rodney Girod <rgirod@confocus.com>, Dave Hansen <dave@sr71.net>");
	MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver");
	MODULE_LICENSE("GPL");

	/*
	* ICH7 LPC/GPIO PCI Config register offsets
	*/
	#define PMBASE 0x040
	#define GPIO_BASE 0x048
	#define GPIO_CTRL 0x04c
	#define GPIO_EN 0x010

	/*
	* The ICH7 GPIO register block is 64 bytes in size.
	*/
	#define ICH7_GPIO_SIZE 64

	/*
	* Define register offsets within the ICH7 register block.
	*/
	#define GPIO_USE_SEL 0x000
	#define GP_IO_SEL 0x004
	#define GP_LVL 0x00c
	#define GPO_BLINK 0x018
	#define GPI_INV 0x030
	#define GPIO_USE_SEL2 0x034
	#define GP_IO_SEL2 0x038
	#define GP_LVL2 0x03c

	/*
	* PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
	*/
	static const struct pci_device_id ich7_lpc_pci_id[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
	{ } /* NULL entry */
	};

	MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id);

	static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
	{
	pr_info("detected '%s'\n", id->ident);
	return 1;
	}

	static bool nodetect;
	module_param_named(nodetect, nodetect, bool, 0);
	MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");

	/*
	* struct nas_led_whitelist - List of known good models
	*
	* Contains the known good models this driver is compatible with.
	* When adding a new model try to be as strict as possible. This
	* makes it possible to keep the false positives (the model is
	* detected as working, but in reality it is not) as low as
	* possible.
	*/
	static struct dmi_system_id nas_led_whitelist[] __initdata = {
	{
	.callback = ss4200_led_dmi_callback,
	.ident = "Intel SS4200-E",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
	DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"),
	DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
	}
	},
	{}
	};

	/*
	* Base I/O address assigned to the Power Management register block
	*/
	static u32 g_pm_io_base;

	/*
	* Base I/O address assigned to the ICH7 GPIO register block
	*/
	static u32 nas_gpio_io_base;

	/*
	* When we successfully register a region, we are returned a resource.
	* We use these to identify which regions we need to release on our way
	* back out.
	*/
	static struct resource *gp_gpio_resource;

	struct nasgpio_led {
	char *name;
	u32 gpio_bit;
	struct led_classdev led_cdev;
	};

	/*
	* gpio_bit(s) are the ICH7 GPIO bit assignments
	*/
	static struct nasgpio_led nasgpio_leds[] = {
	{ .name = "hdd1:blue:sata", .gpio_bit = 0 },
	{ .name = "hdd1:amber:sata", .gpio_bit = 1 },
	{ .name = "hdd2:blue:sata", .gpio_bit = 2 },
	{ .name = "hdd2:amber:sata", .gpio_bit = 3 },
	{ .name = "hdd3:blue:sata", .gpio_bit = 4 },
	{ .name = "hdd3:amber:sata", .gpio_bit = 5 },
	{ .name = "hdd4:blue:sata", .gpio_bit = 6 },
	{ .name = "hdd4:amber:sata", .gpio_bit = 7 },
	{ .name = "power:blue:power", .gpio_bit = 27},
	{ .name = "power:amber:power", .gpio_bit = 28},
	};

	#define NAS_RECOVERY 0x00000400 /* GPIO10 */

	static struct nasgpio_led *
	led_classdev_to_nasgpio_led(struct led_classdev *led_cdev)
	{
	return container_of(led_cdev, struct nasgpio_led, led_cdev);
	}

	static struct nasgpio_led get_led_named(char name)
	{
	int i;
	for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
	if (strcmp(nasgpio_leds[i].name, name))
	continue;
	return &nasgpio_leds[i];
	}
	return NULL;
	}

	/*
	* This protects access to the gpio ports.
	*/
	static DEFINE_SPINLOCK(nasgpio_gpio_lock);

	/*
	* There are two gpio ports, one for blinking and the other
	* for power. @port tells us if we're doing blinking or
	* power control.
	*
	* Caller must hold nasgpio_gpio_lock
	*/
	static void __nasgpio_led_set_attr(struct led_classdev *led_cdev,
	u32 port, u32 value)
	{
	struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
	u32 gpio_out;

	gpio_out = inl(nas_gpio_io_base + port);
	if (value)
	gpio_out \|= (1<<led->gpio_bit);
	else
	gpio_out &= ~(1<<led->gpio_bit);

	outl(gpio_out, nas_gpio_io_base + port);
	}

	static void nasgpio_led_set_attr(struct led_classdev *led_cdev,
	u32 port, u32 value)
	{
	spin_lock(&nasgpio_gpio_lock);
	__nasgpio_led_set_attr(led_cdev, port, value);
	spin_unlock(&nasgpio_gpio_lock);
	}

	static u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port)
	{
	struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
	u32 gpio_in;

	spin_lock(&nasgpio_gpio_lock);
	gpio_in = inl(nas_gpio_io_base + port);
	spin_unlock(&nasgpio_gpio_lock);
	if (gpio_in & (1<<led->gpio_bit))
	return 1;
	return 0;
	}

	/*
	* There is actual brightness control in the hardware,
	* but it is via smbus commands and not implemented
	* in this driver.
	*/
	static void nasgpio_led_set_brightness(struct led_classdev *led_cdev,
	enum led_brightness brightness)
	{
	u32 setting = 0;
	if (brightness >= LED_HALF)
	setting = 1;
	/*
	* Hold the lock across both operations. This ensures
	* consistency so that both the "turn off blinking"
	* and "turn light off" operations complete as a set.
	*/
	spin_lock(&nasgpio_gpio_lock);
	/*
	* LED class documentation asks that past blink state
	* be disabled when brightness is turned to zero.
	*/
	if (brightness == 0)
	__nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0);
	__nasgpio_led_set_attr(led_cdev, GP_LVL, setting);
	spin_unlock(&nasgpio_gpio_lock);
	}

	static int nasgpio_led_set_blink(struct led_classdev *led_cdev,
	unsigned long *delay_on,
	unsigned long *delay_off)
	{
	u32 setting = 1;
	if (!(delay_on == 0 && delay_off == 0) &&
	!(delay_on == 500 && delay_off == 500))
	return -EINVAL;
	/*
	* These are very approximate.
	*/
	*delay_on = 500;
	*delay_off = 500;

	nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting);

	return 0;
	}


	/*
	* Initialize the ICH7 GPIO registers for NAS usage. The BIOS should have
	* already taken care of this, but we will do so in a non destructive manner
	* so that we have what we need whether the BIOS did it or not.
	*/
	static int ich7_gpio_init(struct device *dev)
	{
	int i;
	u32 config_data = 0;
	u32 all_nas_led = 0;

	for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
	all_nas_led \|= (1<<nasgpio_leds[i].gpio_bit);

	spin_lock(&nasgpio_gpio_lock);
	/*
	* We need to enable all of the GPIO lines used by the NAS box,
	* so we will read the current Use Selection and add our usage
	* to it. This should be benign with regard to the original
	* BIOS configuration.
	*/
	config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
	dev_dbg(dev, ": Data read from GPIO_USE_SEL = 0x%08x\n", config_data);
	config_data \|= all_nas_led + NAS_RECOVERY;
	outl(config_data, nas_gpio_io_base + GPIO_USE_SEL);
	config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
	dev_dbg(dev, ": GPIO_USE_SEL = 0x%08x\n\n", config_data);

	/*
	* The LED GPIO outputs need to be configured for output, so we
	* will ensure that all LED lines are cleared for output and the
	* RECOVERY line ready for input. This too should be benign with
	* regard to BIOS configuration.
	*/
	config_data = inl(nas_gpio_io_base + GP_IO_SEL);
	dev_dbg(dev, ": Data read from GP_IO_SEL = 0x%08x\n",
	config_data);
	config_data &= ~all_nas_led;
	config_data \|= NAS_RECOVERY;
	outl(config_data, nas_gpio_io_base + GP_IO_SEL);
	config_data = inl(nas_gpio_io_base + GP_IO_SEL);
	dev_dbg(dev, ": GP_IO_SEL = 0x%08x\n", config_data);

	/*
	* In our final system, the BIOS will initialize the state of all
	* of the LEDs. For now, we turn them all off (or Low).
	*/
	config_data = inl(nas_gpio_io_base + GP_LVL);
	dev_dbg(dev, ": Data read from GP_LVL = 0x%08x\n", config_data);
	/*
	* In our final system, the BIOS will initialize the blink state of all
	* of the LEDs. For now, we turn blink off for all of them.
	*/
	config_data = inl(nas_gpio_io_base + GPO_BLINK);
	dev_dbg(dev, ": Data read from GPO_BLINK = 0x%08x\n", config_data);

	/*
	* At this moment, I am unsure if anything needs to happen with GPI_INV
	*/
	config_data = inl(nas_gpio_io_base + GPI_INV);
	dev_dbg(dev, ": Data read from GPI_INV = 0x%08x\n", config_data);

	spin_unlock(&nasgpio_gpio_lock);
	return 0;
	}

	static void ich7_lpc_cleanup(struct device *dev)
	{
	/*
	* If we were given exclusive use of the GPIO
	* I/O Address range, we must return it.
	*/
	if (gp_gpio_resource) {
	dev_dbg(dev, ": Releasing GPIO I/O addresses\n");
	release_region(nas_gpio_io_base, ICH7_GPIO_SIZE);
	gp_gpio_resource = NULL;
	}
	}

	/*
	* The OS has determined that the LPC of the Intel ICH7 Southbridge is present
	* so we can retrive the required operational information and prepare the GPIO.
	*/
	static struct pci_dev *nas_gpio_pci_dev;
	static int ich7_lpc_probe(struct pci_dev *dev,
	const struct pci_device_id *id)
	{
	int status;
	u32 gc = 0;

	status = pci_enable_device(dev);
	if (status) {
	dev_err(&dev->dev, "pci_enable_device failed\n");
	return -EIO;
	}

	nas_gpio_pci_dev = dev;
	status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base);
	if (status)
	goto out;
	g_pm_io_base &= 0x00000ff80;

	status = pci_read_config_dword(dev, GPIO_CTRL, &gc);
	if (!(GPIO_EN & gc)) {
	status = -EEXIST;
	dev_info(&dev->dev,
	"ERROR: The LPC GPIO Block has not been enabled.\n");
	goto out;
	}

	status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base);
	if (0 > status) {
	dev_info(&dev->dev, "Unable to read GPIOBASE.\n");
	goto out;
	}
	dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base);
	nas_gpio_io_base &= 0x00000ffc0;

	/*
	* Insure that we have exclusive access to the GPIO I/O address range.
	*/
	gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE,
	KBUILD_MODNAME);
	if (NULL == gp_gpio_resource) {
	dev_info(&dev->dev,
	"ERROR Unable to register GPIO I/O addresses.\n");
	status = -1;
	goto out;
	}

	/*
	* Initialize the GPIO for NAS/Home Server Use
	*/
	ich7_gpio_init(&dev->dev);

	out:
	if (status) {
	ich7_lpc_cleanup(&dev->dev);
	pci_disable_device(dev);
	}
	return status;
	}

	static void ich7_lpc_remove(struct pci_dev *dev)
	{
	ich7_lpc_cleanup(&dev->dev);
	pci_disable_device(dev);
	}

	/*
	* pci_driver structure passed to the PCI modules
	*/
	static struct pci_driver nas_gpio_pci_driver = {
	.name = KBUILD_MODNAME,
	.id_table = ich7_lpc_pci_id,
	.probe = ich7_lpc_probe,
	.remove = ich7_lpc_remove,
	};

	static struct led_classdev *get_classdev_for_led_nr(int nr)
	{
	struct nasgpio_led *nas_led = &nasgpio_leds[nr];
	struct led_classdev *led = &nas_led->led_cdev;
	return led;
	}


	static void set_power_light_amber_noblink(void)
	{
	struct nasgpio_led *amber = get_led_named("power:amber:power");
	struct nasgpio_led *blue = get_led_named("power:blue:power");

	if (!amber \|\| !blue)
	return;
	/*
	* LED_OFF implies disabling future blinking
	*/
	pr_debug("setting blue off and amber on\n");

	nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF);
	nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL);
	}

	static ssize_t nas_led_blink_show(struct device *dev,
	struct device_attribute attr, char buf)
	{
	struct led_classdev *led = dev_get_drvdata(dev);
	int blinking = 0;
	if (nasgpio_led_get_attr(led, GPO_BLINK))
	blinking = 1;
	return sprintf(buf, "%u\n", blinking);
	}

	static ssize_t nas_led_blink_store(struct device *dev,
	struct device_attribute *attr,
	const char *buf, size_t size)
	{
	int ret;
	struct led_classdev *led = dev_get_drvdata(dev);
	unsigned long blink_state;

	ret = kstrtoul(buf, 10, &blink_state);
	if (ret)
	return ret;

	nasgpio_led_set_attr(led, GPO_BLINK, blink_state);

	return size;
	}

	static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store);

	static struct attribute *nasgpio_led_attrs[] = {
	&dev_attr_blink.attr,
	NULL
	};
	ATTRIBUTE_GROUPS(nasgpio_led);

	static int register_nasgpio_led(int led_nr)
	{
	int ret;
	struct nasgpio_led *nas_led = &nasgpio_leds[led_nr];
	struct led_classdev *led = get_classdev_for_led_nr(led_nr);

	led->name = nas_led->name;
	led->brightness = LED_OFF;
	if (nasgpio_led_get_attr(led, GP_LVL))
	led->brightness = LED_FULL;
	led->brightness_set = nasgpio_led_set_brightness;
	led->blink_set = nasgpio_led_set_blink;
	led->groups = nasgpio_led_groups;
	ret = led_classdev_register(&nas_gpio_pci_dev->dev, led);
	if (ret)
	return ret;

	return 0;
	}

	static void unregister_nasgpio_led(int led_nr)
	{
	struct led_classdev *led = get_classdev_for_led_nr(led_nr);
	led_classdev_unregister(led);
	}
	/*
	* module load/initialization
	*/
	static int __init nas_gpio_init(void)
	{
	int i;
	int ret = 0;
	int nr_devices = 0;

	nr_devices = dmi_check_system(nas_led_whitelist);
	if (nodetect) {
	pr_info("skipping hardware autodetection\n");
	pr_info("Please send 'dmidecode' output to dave@sr71.net\n");
	nr_devices++;
	}

	if (nr_devices <= 0) {
	pr_info("no LED devices found\n");
	return -ENODEV;
	}

	pr_info("registering PCI driver\n");
	ret = pci_register_driver(&nas_gpio_pci_driver);
	if (ret)
	return ret;
	for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
	ret = register_nasgpio_led(i);
	if (ret)
	goto out_err;
	}
	/*
	* When the system powers on, the BIOS leaves the power
	* light blue and blinking. This will turn it solid
	* amber once the driver is loaded.
	*/
	set_power_light_amber_noblink();
	return 0;
	out_err:
	for (i--; i >= 0; i--)
	unregister_nasgpio_led(i);
	pci_unregister_driver(&nas_gpio_pci_driver);
	return ret;
	}

	/*
	* module unload
	*/
	static void __exit nas_gpio_exit(void)
	{
	int i;
	pr_info("Unregistering driver\n");
	for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
	unregister_nasgpio_led(i);
	pci_unregister_driver(&nas_gpio_pci_driver);
	}

	module_init(nas_gpio_init);
	module_exit(nas_gpio_exit);