arch/mips/netlogic/xlp/nlm_hal.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
  * reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
  * General Public License (GPL) Version 2, available from the file
  * COPYING in the main directory of this source tree, or the NetLogic
  * license below:
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in
  *    the documentation and/or other materials provided with the
  *    distribution.
  *
  * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
  * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
  * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/delay.h>

 #include <asm/mipsregs.h>
 #include <asm/time.h>

 #include <asm/netlogic/common.h>
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
 #include <asm/netlogic/xlp-hal/bridge.h>
 #include <asm/netlogic/xlp-hal/pic.h>
 #include <asm/netlogic/xlp-hal/sys.h>

 /* Main initialization */
 void nlm_node_init(int node)
 {
 	struct nlm_soc_info *nodep;

 	nodep = nlm_get_node(node);
 	nodep->sysbase = nlm_get_sys_regbase(node);
 	nodep->picbase = nlm_get_pic_regbase(node);
 	nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
 	spin_lock_init(&nodep->piclock);
 }

 int nlm_irq_to_irt(int irq)
 {
 	uint64_t pcibase;
 	int devoff, irt;

 	switch (irq) {
 	case PIC_UART_0_IRQ:
 		devoff = XLP_IO_UART0_OFFSET(0);
 		break;
 	case PIC_UART_1_IRQ:
 		devoff = XLP_IO_UART1_OFFSET(0);
 		break;
 	case PIC_EHCI_0_IRQ:
 		devoff = XLP_IO_USB_EHCI0_OFFSET(0);
 		break;
 	case PIC_EHCI_1_IRQ:
 		devoff = XLP_IO_USB_EHCI1_OFFSET(0);
 		break;
 	case PIC_OHCI_0_IRQ:
 		devoff = XLP_IO_USB_OHCI0_OFFSET(0);
 		break;
 	case PIC_OHCI_1_IRQ:
 		devoff = XLP_IO_USB_OHCI1_OFFSET(0);
 		break;
 	case PIC_OHCI_2_IRQ:
 		devoff = XLP_IO_USB_OHCI2_OFFSET(0);
 		break;
 	case PIC_OHCI_3_IRQ:
 		devoff = XLP_IO_USB_OHCI3_OFFSET(0);
 		break;
 	case PIC_MMC_IRQ:
 		devoff = XLP_IO_SD_OFFSET(0);
 		break;
 	case PIC_I2C_0_IRQ:
 		devoff = XLP_IO_I2C0_OFFSET(0);
 		break;
 	case PIC_I2C_1_IRQ:
 		devoff = XLP_IO_I2C1_OFFSET(0);
 		break;
 	default:
 		devoff = 0;
 		break;
 	}

 	if (devoff != 0) {
 		pcibase = nlm_pcicfg_base(devoff);
 		irt = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG) & 0xffff;
 		/* HW bug, I2C 1 irt entry is off by one */
 		if (irq == PIC_I2C_1_IRQ)
 			irt = irt + 1;
 	} else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) {
 		/* HW bug, PCI IRT entries are bad on early silicon, fix */
 		irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ);
 	} else {
 		irt = -1;
 	}
 	return irt;
 }

 unsigned int nlm_get_core_frequency(int node, int core)
 {
 	unsigned int pll_divf, pll_divr, dfs_div, ext_div;
 	unsigned int rstval, dfsval, denom;
 	uint64_t num, sysbase;

 	sysbase = nlm_get_node(node)->sysbase;
 	rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
 	if (cpu_is_xlpii()) {
 		num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26));
 		denom = 3;
 	} else {
 		dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
 		pll_divf = ((rstval >> 10) & 0x7f) + 1;
 		pll_divr = ((rstval >> 8)  & 0x3) + 1;
 		ext_div  = ((rstval >> 30) & 0x3) + 1;
 		dfs_div  = ((dfsval >> (core * 4)) & 0xf) + 1;

 		num = 800000000ULL * pll_divf;
 		denom = 3 * pll_divr * ext_div * dfs_div;
 	}
 	do_div(num, denom);
 	return (unsigned int)num;
 }

 /* Calculate Frequency to the PIC from PLL.
  * freq_out = ( ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13 ) /
  * ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
  */
 static unsigned int nlm_2xx_get_pic_frequency(int node)
 {
 	u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div;
 	u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
 	u64 ref_clk, sysbase, pll_out_freq_num, ref_clk_select;

 	sysbase = nlm_get_node(node)->sysbase;

 	/* Find ref_clk_base */
 	ref_clk_select =
 		(nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
 	switch (ref_clk_select) {
 	case 0:
 		ref_clk = 200000000ULL;
 		ref_div = 3;
 		break;
 	case 1:
 		ref_clk = 100000000ULL;
 		ref_div = 1;
 		break;
 	case 2:
 		ref_clk = 125000000ULL;
 		ref_div = 1;
 		break;
 	case 3:
 		ref_clk = 400000000ULL;
 		ref_div = 3;
 		break;
 	}

 	/* Find the clock source PLL device for PIC */
 	reg_select = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_SEL) >> 22) & 0x3;
 	switch (reg_select) {
 	case 0:
 		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0);
 		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2);
 		break;
 	case 1:
 		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(0));
 		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(0));
 		break;
 	case 2:
 		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(1));
 		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(1));
 		break;
 	case 3:
 		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(2));
 		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(2));
 		break;
 	}

 	vco_post_div = (ctrl_val0 >> 5) & 0x7;
 	pll_post_div = (ctrl_val0 >> 24) & 0x7;
 	mdiv = ctrl_val2 & 0xff;
 	fdiv = (ctrl_val2 >> 8) & 0xfff;

 	/* Find PLL post divider value */
 	switch (pll_post_div) {
 	case 1:
 		pll_post_div = 2;
 		break;
 	case 3:
 		pll_post_div = 4;
 		break;
 	case 7:
 		pll_post_div = 8;
 		break;
 	case 6:
 		pll_post_div = 16;
 		break;
 	case 0:
 	default:
 		pll_post_div = 1;
 		break;
 	}

 	fdiv = fdiv/(1 << 13);
 	pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv;
 	pll_out_freq_den = (1 << vco_post_div) * pll_post_div * 3;

 	if (pll_out_freq_den > 0)
 		do_div(pll_out_freq_num, pll_out_freq_den);

 	/* PIC post divider, which happens after PLL */
 	pic_div = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_DIV) >> 22) & 0x3;
 	do_div(pll_out_freq_num, 1 << pic_div);

 	return pll_out_freq_num;
 }

 unsigned int nlm_get_pic_frequency(int node)
 {
 	if (cpu_is_xlpii())
 		return nlm_2xx_get_pic_frequency(node);
 	else
 		return 133333333;
 }

 unsigned int nlm_get_cpu_frequency(void)
 {
 	return nlm_get_core_frequency(0, 0);
 }

 /*
  * Fills upto 8 pairs of entries containing the DRAM map of a node
  * if n < 0, get dram map for all nodes
  */
 int xlp_get_dram_map(int n, uint64_t *dram_map)
 {
 	uint64_t bridgebase, base, lim;
 	uint32_t val;
 	int i, node, rv;

 	/* Look only at mapping on Node 0, we don't handle crazy configs */
 	bridgebase = nlm_get_bridge_regbase(0);
 	rv = 0;
 	for (i = 0; i < 8; i++) {
 		val = nlm_read_bridge_reg(bridgebase,
 					BRIDGE_DRAM_NODE_TRANSLN(i));
 		node = (val >> 1) & 0x3;
 		if (n >= 0 && n != node)
 			continue;
 		val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_BAR(i));
 		val = (val >>  12) & 0xfffff;
 		base = (uint64_t) val << 20;
 		val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_LIMIT(i));
 		val = (val >>  12) & 0xfffff;
 		if (val == 0)   /* BAR not used */
 			continue;
 		lim = ((uint64_t)val + 1) << 20;
 		dram_map[rv] = base;
 		dram_map[rv + 1] = lim;
 		rv += 2;
 	}
 	return rv;
 }
	/*
	* Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
	* reserved.
	*
	* This software is available to you under a choice of one of two
	* licenses. You may choose to be licensed under the terms of the GNU
	* General Public License (GPL) Version 2, available from the file
	* COPYING in the main directory of this source tree, or the NetLogic
	* license below:
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	*
	* THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
	* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
	* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
	* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
	* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/mm.h>
	#include <linux/delay.h>

	#include <asm/mipsregs.h>
	#include <asm/time.h>

	#include <asm/netlogic/common.h>
	#include <asm/netlogic/haldefs.h>
	#include <asm/netlogic/xlp-hal/iomap.h>
	#include <asm/netlogic/xlp-hal/xlp.h>
	#include <asm/netlogic/xlp-hal/bridge.h>
	#include <asm/netlogic/xlp-hal/pic.h>
	#include <asm/netlogic/xlp-hal/sys.h>

	/* Main initialization */
	void nlm_node_init(int node)
	{
	struct nlm_soc_info *nodep;

	nodep = nlm_get_node(node);
	nodep->sysbase = nlm_get_sys_regbase(node);
	nodep->picbase = nlm_get_pic_regbase(node);
	nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
	spin_lock_init(&nodep->piclock);
	}

	int nlm_irq_to_irt(int irq)
	{
	uint64_t pcibase;
	int devoff, irt;

	switch (irq) {
	case PIC_UART_0_IRQ:
	devoff = XLP_IO_UART0_OFFSET(0);
	break;
	case PIC_UART_1_IRQ:
	devoff = XLP_IO_UART1_OFFSET(0);
	break;
	case PIC_EHCI_0_IRQ:
	devoff = XLP_IO_USB_EHCI0_OFFSET(0);
	break;
	case PIC_EHCI_1_IRQ:
	devoff = XLP_IO_USB_EHCI1_OFFSET(0);
	break;
	case PIC_OHCI_0_IRQ:
	devoff = XLP_IO_USB_OHCI0_OFFSET(0);
	break;
	case PIC_OHCI_1_IRQ:
	devoff = XLP_IO_USB_OHCI1_OFFSET(0);
	break;
	case PIC_OHCI_2_IRQ:
	devoff = XLP_IO_USB_OHCI2_OFFSET(0);
	break;
	case PIC_OHCI_3_IRQ:
	devoff = XLP_IO_USB_OHCI3_OFFSET(0);
	break;
	case PIC_MMC_IRQ:
	devoff = XLP_IO_SD_OFFSET(0);
	break;
	case PIC_I2C_0_IRQ:
	devoff = XLP_IO_I2C0_OFFSET(0);
	break;
	case PIC_I2C_1_IRQ:
	devoff = XLP_IO_I2C1_OFFSET(0);
	break;
	default:
	devoff = 0;
	break;
	}

	if (devoff != 0) {
	pcibase = nlm_pcicfg_base(devoff);
	irt = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG) & 0xffff;
	/* HW bug, I2C 1 irt entry is off by one */
	if (irq == PIC_I2C_1_IRQ)
	irt = irt + 1;
	} else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) {
	/* HW bug, PCI IRT entries are bad on early silicon, fix */
	irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ);
	} else {
	irt = -1;
	}
	return irt;
	}

	unsigned int nlm_get_core_frequency(int node, int core)
	{
	unsigned int pll_divf, pll_divr, dfs_div, ext_div;
	unsigned int rstval, dfsval, denom;
	uint64_t num, sysbase;

	sysbase = nlm_get_node(node)->sysbase;
	rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
	if (cpu_is_xlpii()) {
	num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26));
	denom = 3;
	} else {
	dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
	pll_divf = ((rstval >> 10) & 0x7f) + 1;
	pll_divr = ((rstval >> 8) & 0x3) + 1;
	ext_div = ((rstval >> 30) & 0x3) + 1;
	dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1;

	num = 800000000ULL * pll_divf;
	denom = 3 * pll_divr * ext_div * dfs_div;
	}
	do_div(num, denom);
	return (unsigned int)num;
	}

	/* Calculate Frequency to the PIC from PLL.
	* freq_out = ( ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13 ) /
	* ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
	*/
	static unsigned int nlm_2xx_get_pic_frequency(int node)
	{
	u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div;
	u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
	u64 ref_clk, sysbase, pll_out_freq_num, ref_clk_select;

	sysbase = nlm_get_node(node)->sysbase;

	/* Find ref_clk_base */
	ref_clk_select =
	(nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
	switch (ref_clk_select) {
	case 0:
	ref_clk = 200000000ULL;
	ref_div = 3;
	break;
	case 1:
	ref_clk = 100000000ULL;
	ref_div = 1;
	break;
	case 2:
	ref_clk = 125000000ULL;
	ref_div = 1;
	break;
	case 3:
	ref_clk = 400000000ULL;
	ref_div = 3;
	break;
	}

	/* Find the clock source PLL device for PIC */
	reg_select = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_SEL) >> 22) & 0x3;
	switch (reg_select) {
	case 0:
	ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0);
	ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2);
	break;
	case 1:
	ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(0));
	ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(0));
	break;
	case 2:
	ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(1));
	ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(1));
	break;
	case 3:
	ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(2));
	ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(2));
	break;
	}

	vco_post_div = (ctrl_val0 >> 5) & 0x7;
	pll_post_div = (ctrl_val0 >> 24) & 0x7;
	mdiv = ctrl_val2 & 0xff;
	fdiv = (ctrl_val2 >> 8) & 0xfff;

	/* Find PLL post divider value */
	switch (pll_post_div) {
	case 1:
	pll_post_div = 2;
	break;
	case 3:
	pll_post_div = 4;
	break;
	case 7:
	pll_post_div = 8;
	break;
	case 6:
	pll_post_div = 16;
	break;
	case 0:
	default:
	pll_post_div = 1;
	break;
	}

	fdiv = fdiv/(1 << 13);
	pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv;
	pll_out_freq_den = (1 << vco_post_div) * pll_post_div * 3;

	if (pll_out_freq_den > 0)
	do_div(pll_out_freq_num, pll_out_freq_den);

	/* PIC post divider, which happens after PLL */
	pic_div = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_DIV) >> 22) & 0x3;
	do_div(pll_out_freq_num, 1 << pic_div);

	return pll_out_freq_num;
	}

	unsigned int nlm_get_pic_frequency(int node)
	{
	if (cpu_is_xlpii())
	return nlm_2xx_get_pic_frequency(node);
	else
	return 133333333;
	}

	unsigned int nlm_get_cpu_frequency(void)
	{
	return nlm_get_core_frequency(0, 0);
	}

	/*
	* Fills upto 8 pairs of entries containing the DRAM map of a node
	* if n < 0, get dram map for all nodes
	*/
	int xlp_get_dram_map(int n, uint64_t *dram_map)
	{
	uint64_t bridgebase, base, lim;
	uint32_t val;
	int i, node, rv;

	/* Look only at mapping on Node 0, we don't handle crazy configs */
	bridgebase = nlm_get_bridge_regbase(0);
	rv = 0;
	for (i = 0; i < 8; i++) {
	val = nlm_read_bridge_reg(bridgebase,
	BRIDGE_DRAM_NODE_TRANSLN(i));
	node = (val >> 1) & 0x3;
	if (n >= 0 && n != node)
	continue;
	val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_BAR(i));
	val = (val >> 12) & 0xfffff;
	base = (uint64_t) val << 20;
	val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_LIMIT(i));
	val = (val >> 12) & 0xfffff;
	if (val == 0) /* BAR not used */
	continue;
	lim = ((uint64_t)val + 1) << 20;
	dram_map[rv] = base;
	dram_map[rv + 1] = lim;
	rv += 2;
	}
	return rv;
	}