| /****************************************************************************** |
| * |
| * Module Name: evxface - External interfaces for ACPI events |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #define EXPORT_ACPI_INTERFACES |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acnamesp.h" |
| #include "acevents.h" |
| #include "acinterp.h" |
| |
| #define _COMPONENT ACPI_EVENTS |
| ACPI_MODULE_NAME("evxface") |
| #if (!ACPI_REDUCED_HARDWARE) |
| /* Local prototypes */ |
| static acpi_status |
| acpi_ev_install_gpe_handler(acpi_handle gpe_device, |
| u32 gpe_number, |
| u32 type, |
| u8 is_raw_handler, |
| acpi_gpe_handler address, void *context); |
| |
| #endif |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_notify_handler |
| * |
| * PARAMETERS: device - The device for which notifies will be handled |
| * handler_type - The type of handler: |
| * ACPI_SYSTEM_NOTIFY: System Handler (00-7F) |
| * ACPI_DEVICE_NOTIFY: Device Handler (80-FF) |
| * ACPI_ALL_NOTIFY: Both System and Device |
| * handler - Address of the handler |
| * context - Value passed to the handler on each GPE |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Install a handler for notifications on an ACPI Device, |
| * thermal_zone, or Processor object. |
| * |
| * NOTES: The Root namespace object may have only one handler for each |
| * type of notify (System/Device). Device/Thermal/Processor objects |
| * may have one device notify handler, and multiple system notify |
| * handlers. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_install_notify_handler(acpi_handle device, |
| u32 handler_type, |
| acpi_notify_handler handler, void *context) |
| { |
| struct acpi_namespace_node *node = |
| ACPI_CAST_PTR(struct acpi_namespace_node, device); |
| union acpi_operand_object *obj_desc; |
| union acpi_operand_object *handler_obj; |
| acpi_status status; |
| u32 i; |
| |
| ACPI_FUNCTION_TRACE(acpi_install_notify_handler); |
| |
| /* Parameter validation */ |
| |
| if ((!device) || (!handler) || (!handler_type) || |
| (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* |
| * Root Object: |
| * Registering a notify handler on the root object indicates that the |
| * caller wishes to receive notifications for all objects. Note that |
| * only one global handler can be registered per notify type. |
| * Ensure that a handler is not already installed. |
| */ |
| if (device == ACPI_ROOT_OBJECT) { |
| for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { |
| if (handler_type & (i + 1)) { |
| if (acpi_gbl_global_notify[i].handler) { |
| status = AE_ALREADY_EXISTS; |
| goto unlock_and_exit; |
| } |
| |
| acpi_gbl_global_notify[i].handler = handler; |
| acpi_gbl_global_notify[i].context = context; |
| } |
| } |
| |
| goto unlock_and_exit; /* Global notify handler installed, all done */ |
| } |
| |
| /* |
| * All Other Objects: |
| * Caller will only receive notifications specific to the target |
| * object. Note that only certain object types are allowed to |
| * receive notifications. |
| */ |
| |
| /* Are Notifies allowed on this object? */ |
| |
| if (!acpi_ev_is_notify_object(node)) { |
| status = AE_TYPE; |
| goto unlock_and_exit; |
| } |
| |
| /* Check for an existing internal object, might not exist */ |
| |
| obj_desc = acpi_ns_get_attached_object(node); |
| if (!obj_desc) { |
| |
| /* Create a new object */ |
| |
| obj_desc = acpi_ut_create_internal_object(node->type); |
| if (!obj_desc) { |
| status = AE_NO_MEMORY; |
| goto unlock_and_exit; |
| } |
| |
| /* Attach new object to the Node, remove local reference */ |
| |
| status = acpi_ns_attach_object(device, obj_desc, node->type); |
| acpi_ut_remove_reference(obj_desc); |
| if (ACPI_FAILURE(status)) { |
| goto unlock_and_exit; |
| } |
| } |
| |
| /* Ensure that the handler is not already installed in the lists */ |
| |
| for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { |
| if (handler_type & (i + 1)) { |
| handler_obj = obj_desc->common_notify.notify_list[i]; |
| while (handler_obj) { |
| if (handler_obj->notify.handler == handler) { |
| status = AE_ALREADY_EXISTS; |
| goto unlock_and_exit; |
| } |
| |
| handler_obj = handler_obj->notify.next[i]; |
| } |
| } |
| } |
| |
| /* Create and populate a new notify handler object */ |
| |
| handler_obj = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY); |
| if (!handler_obj) { |
| status = AE_NO_MEMORY; |
| goto unlock_and_exit; |
| } |
| |
| handler_obj->notify.node = node; |
| handler_obj->notify.handler_type = handler_type; |
| handler_obj->notify.handler = handler; |
| handler_obj->notify.context = context; |
| |
| /* Install the handler at the list head(s) */ |
| |
| for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { |
| if (handler_type & (i + 1)) { |
| handler_obj->notify.next[i] = |
| obj_desc->common_notify.notify_list[i]; |
| |
| obj_desc->common_notify.notify_list[i] = handler_obj; |
| } |
| } |
| |
| /* Add an extra reference if handler was installed in both lists */ |
| |
| if (handler_type == ACPI_ALL_NOTIFY) { |
| acpi_ut_add_reference(handler_obj); |
| } |
| |
| unlock_and_exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_notify_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_remove_notify_handler |
| * |
| * PARAMETERS: device - The device for which the handler is installed |
| * handler_type - The type of handler: |
| * ACPI_SYSTEM_NOTIFY: System Handler (00-7F) |
| * ACPI_DEVICE_NOTIFY: Device Handler (80-FF) |
| * ACPI_ALL_NOTIFY: Both System and Device |
| * handler - Address of the handler |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Remove a handler for notifies on an ACPI device |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_remove_notify_handler(acpi_handle device, |
| u32 handler_type, acpi_notify_handler handler) |
| { |
| struct acpi_namespace_node *node = |
| ACPI_CAST_PTR(struct acpi_namespace_node, device); |
| union acpi_operand_object *obj_desc; |
| union acpi_operand_object *handler_obj; |
| union acpi_operand_object *previous_handler_obj; |
| acpi_status status = AE_OK; |
| u32 i; |
| |
| ACPI_FUNCTION_TRACE(acpi_remove_notify_handler); |
| |
| /* Parameter validation */ |
| |
| if ((!device) || (!handler) || (!handler_type) || |
| (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* Root Object. Global handlers are removed here */ |
| |
| if (device == ACPI_ROOT_OBJECT) { |
| for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { |
| if (handler_type & (i + 1)) { |
| status = |
| acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| if (!acpi_gbl_global_notify[i].handler || |
| (acpi_gbl_global_notify[i].handler != |
| handler)) { |
| status = AE_NOT_EXIST; |
| goto unlock_and_exit; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Removing global notify handler\n")); |
| |
| acpi_gbl_global_notify[i].handler = NULL; |
| acpi_gbl_global_notify[i].context = NULL; |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| |
| /* Make sure all deferred notify tasks are completed */ |
| |
| acpi_os_wait_events_complete(); |
| } |
| } |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /* All other objects: Are Notifies allowed on this object? */ |
| |
| if (!acpi_ev_is_notify_object(node)) { |
| return_ACPI_STATUS(AE_TYPE); |
| } |
| |
| /* Must have an existing internal object */ |
| |
| obj_desc = acpi_ns_get_attached_object(node); |
| if (!obj_desc) { |
| return_ACPI_STATUS(AE_NOT_EXIST); |
| } |
| |
| /* Internal object exists. Find the handler and remove it */ |
| |
| for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) { |
| if (handler_type & (i + 1)) { |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| handler_obj = obj_desc->common_notify.notify_list[i]; |
| previous_handler_obj = NULL; |
| |
| /* Attempt to find the handler in the handler list */ |
| |
| while (handler_obj && |
| (handler_obj->notify.handler != handler)) { |
| previous_handler_obj = handler_obj; |
| handler_obj = handler_obj->notify.next[i]; |
| } |
| |
| if (!handler_obj) { |
| status = AE_NOT_EXIST; |
| goto unlock_and_exit; |
| } |
| |
| /* Remove the handler object from the list */ |
| |
| if (previous_handler_obj) { /* Handler is not at the list head */ |
| previous_handler_obj->notify.next[i] = |
| handler_obj->notify.next[i]; |
| } else { /* Handler is at the list head */ |
| |
| obj_desc->common_notify.notify_list[i] = |
| handler_obj->notify.next[i]; |
| } |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| |
| /* Make sure all deferred notify tasks are completed */ |
| |
| acpi_os_wait_events_complete(); |
| acpi_ut_remove_reference(handler_obj); |
| } |
| } |
| |
| return_ACPI_STATUS(status); |
| |
| unlock_and_exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_exception_handler |
| * |
| * PARAMETERS: handler - Pointer to the handler function for the |
| * event |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Saves the pointer to the handler function |
| * |
| ******************************************************************************/ |
| #ifdef ACPI_FUTURE_USAGE |
| acpi_status acpi_install_exception_handler(acpi_exception_handler handler) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_install_exception_handler); |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Don't allow two handlers. */ |
| |
| if (acpi_gbl_exception_handler) { |
| status = AE_ALREADY_EXISTS; |
| goto cleanup; |
| } |
| |
| /* Install the handler */ |
| |
| acpi_gbl_exception_handler = handler; |
| |
| cleanup: |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) |
| #endif /* ACPI_FUTURE_USAGE */ |
| |
| #if (!ACPI_REDUCED_HARDWARE) |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_sci_handler |
| * |
| * PARAMETERS: address - Address of the handler |
| * context - Value passed to the handler on each SCI |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Install a handler for a System Control Interrupt. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_install_sci_handler(acpi_sci_handler address, void *context) |
| { |
| struct acpi_sci_handler_info *new_sci_handler; |
| struct acpi_sci_handler_info *sci_handler; |
| acpi_cpu_flags flags; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_install_sci_handler); |
| |
| if (!address) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* Allocate and init a handler object */ |
| |
| new_sci_handler = ACPI_ALLOCATE(sizeof(struct acpi_sci_handler_info)); |
| if (!new_sci_handler) { |
| return_ACPI_STATUS(AE_NO_MEMORY); |
| } |
| |
| new_sci_handler->address = address; |
| new_sci_handler->context = context; |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| goto exit; |
| } |
| |
| /* Lock list during installation */ |
| |
| flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); |
| sci_handler = acpi_gbl_sci_handler_list; |
| |
| /* Ensure handler does not already exist */ |
| |
| while (sci_handler) { |
| if (address == sci_handler->address) { |
| status = AE_ALREADY_EXISTS; |
| goto unlock_and_exit; |
| } |
| |
| sci_handler = sci_handler->next; |
| } |
| |
| /* Install the new handler into the global list (at head) */ |
| |
| new_sci_handler->next = acpi_gbl_sci_handler_list; |
| acpi_gbl_sci_handler_list = new_sci_handler; |
| |
| unlock_and_exit: |
| |
| acpi_os_release_lock(acpi_gbl_gpe_lock, flags); |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| |
| exit: |
| if (ACPI_FAILURE(status)) { |
| ACPI_FREE(new_sci_handler); |
| } |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_sci_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_remove_sci_handler |
| * |
| * PARAMETERS: address - Address of the handler |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Remove a handler for a System Control Interrupt. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_remove_sci_handler(acpi_sci_handler address) |
| { |
| struct acpi_sci_handler_info *prev_sci_handler; |
| struct acpi_sci_handler_info *next_sci_handler; |
| acpi_cpu_flags flags; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_remove_sci_handler); |
| |
| if (!address) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Remove the SCI handler with lock */ |
| |
| flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); |
| |
| prev_sci_handler = NULL; |
| next_sci_handler = acpi_gbl_sci_handler_list; |
| while (next_sci_handler) { |
| if (next_sci_handler->address == address) { |
| |
| /* Unlink and free the SCI handler info block */ |
| |
| if (prev_sci_handler) { |
| prev_sci_handler->next = next_sci_handler->next; |
| } else { |
| acpi_gbl_sci_handler_list = |
| next_sci_handler->next; |
| } |
| |
| acpi_os_release_lock(acpi_gbl_gpe_lock, flags); |
| ACPI_FREE(next_sci_handler); |
| goto unlock_and_exit; |
| } |
| |
| prev_sci_handler = next_sci_handler; |
| next_sci_handler = next_sci_handler->next; |
| } |
| |
| acpi_os_release_lock(acpi_gbl_gpe_lock, flags); |
| status = AE_NOT_EXIST; |
| |
| unlock_and_exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_remove_sci_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_global_event_handler |
| * |
| * PARAMETERS: handler - Pointer to the global event handler function |
| * context - Value passed to the handler on each event |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Saves the pointer to the handler function. The global handler |
| * is invoked upon each incoming GPE and Fixed Event. It is |
| * invoked at interrupt level at the time of the event dispatch. |
| * Can be used to update event counters, etc. |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_install_global_event_handler(acpi_gbl_event_handler handler, void *context) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); |
| |
| /* Parameter validation */ |
| |
| if (!handler) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Don't allow two handlers. */ |
| |
| if (acpi_gbl_global_event_handler) { |
| status = AE_ALREADY_EXISTS; |
| goto cleanup; |
| } |
| |
| acpi_gbl_global_event_handler = handler; |
| acpi_gbl_global_event_handler_context = context; |
| |
| cleanup: |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_fixed_event_handler |
| * |
| * PARAMETERS: event - Event type to enable. |
| * handler - Pointer to the handler function for the |
| * event |
| * context - Value passed to the handler on each GPE |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Saves the pointer to the handler function and then enables the |
| * event. |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_install_fixed_event_handler(u32 event, |
| acpi_event_handler handler, void *context) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); |
| |
| /* Parameter validation */ |
| |
| if (event > ACPI_EVENT_MAX) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Do not allow multiple handlers */ |
| |
| if (acpi_gbl_fixed_event_handlers[event].handler) { |
| status = AE_ALREADY_EXISTS; |
| goto cleanup; |
| } |
| |
| /* Install the handler before enabling the event */ |
| |
| acpi_gbl_fixed_event_handlers[event].handler = handler; |
| acpi_gbl_fixed_event_handlers[event].context = context; |
| |
| status = acpi_clear_event(event); |
| if (ACPI_SUCCESS(status)) |
| status = acpi_enable_event(event, 0); |
| if (ACPI_FAILURE(status)) { |
| ACPI_WARNING((AE_INFO, |
| "Could not enable fixed event - %s (%u)", |
| acpi_ut_get_event_name(event), event)); |
| |
| /* Remove the handler */ |
| |
| acpi_gbl_fixed_event_handlers[event].handler = NULL; |
| acpi_gbl_fixed_event_handlers[event].context = NULL; |
| } else { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Enabled fixed event %s (%X), Handler=%p\n", |
| acpi_ut_get_event_name(event), event, |
| handler)); |
| } |
| |
| cleanup: |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_remove_fixed_event_handler |
| * |
| * PARAMETERS: event - Event type to disable. |
| * handler - Address of the handler |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Disables the event and unregisters the event handler. |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) |
| { |
| acpi_status status = AE_OK; |
| |
| ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); |
| |
| /* Parameter validation */ |
| |
| if (event > ACPI_EVENT_MAX) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Disable the event before removing the handler */ |
| |
| status = acpi_disable_event(event, 0); |
| |
| /* Always Remove the handler */ |
| |
| acpi_gbl_fixed_event_handlers[event].handler = NULL; |
| acpi_gbl_fixed_event_handlers[event].context = NULL; |
| |
| if (ACPI_FAILURE(status)) { |
| ACPI_WARNING((AE_INFO, |
| "Could not disable fixed event - %s (%u)", |
| acpi_ut_get_event_name(event), event)); |
| } else { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Disabled fixed event - %s (%X)\n", |
| acpi_ut_get_event_name(event), event)); |
| } |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_install_gpe_handler |
| * |
| * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT |
| * defined GPEs) |
| * gpe_number - The GPE number within the GPE block |
| * type - Whether this GPE should be treated as an |
| * edge- or level-triggered interrupt. |
| * is_raw_handler - Whether this GPE should be handled using |
| * the special GPE handler mode. |
| * address - Address of the handler |
| * context - Value passed to the handler on each GPE |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Internal function to install a handler for a General Purpose |
| * Event. |
| * |
| ******************************************************************************/ |
| static acpi_status |
| acpi_ev_install_gpe_handler(acpi_handle gpe_device, |
| u32 gpe_number, |
| u32 type, |
| u8 is_raw_handler, |
| acpi_gpe_handler address, void *context) |
| { |
| struct acpi_gpe_event_info *gpe_event_info; |
| struct acpi_gpe_handler_info *handler; |
| acpi_status status; |
| acpi_cpu_flags flags; |
| |
| ACPI_FUNCTION_TRACE(ev_install_gpe_handler); |
| |
| /* Parameter validation */ |
| |
| if ((!address) || (type & ~ACPI_GPE_XRUPT_TYPE_MASK)) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Allocate and init handler object (before lock) */ |
| |
| handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_handler_info)); |
| if (!handler) { |
| status = AE_NO_MEMORY; |
| goto unlock_and_exit; |
| } |
| |
| flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); |
| |
| /* Ensure that we have a valid GPE number */ |
| |
| gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); |
| if (!gpe_event_info) { |
| status = AE_BAD_PARAMETER; |
| goto free_and_exit; |
| } |
| |
| /* Make sure that there isn't a handler there already */ |
| |
| if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == |
| ACPI_GPE_DISPATCH_HANDLER) || |
| (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == |
| ACPI_GPE_DISPATCH_RAW_HANDLER)) { |
| status = AE_ALREADY_EXISTS; |
| goto free_and_exit; |
| } |
| |
| handler->address = address; |
| handler->context = context; |
| handler->method_node = gpe_event_info->dispatch.method_node; |
| handler->original_flags = (u8)(gpe_event_info->flags & |
| (ACPI_GPE_XRUPT_TYPE_MASK | |
| ACPI_GPE_DISPATCH_MASK)); |
| |
| /* |
| * If the GPE is associated with a method, it may have been enabled |
| * automatically during initialization, in which case it has to be |
| * disabled now to avoid spurious execution of the handler. |
| */ |
| if (((ACPI_GPE_DISPATCH_TYPE(handler->original_flags) == |
| ACPI_GPE_DISPATCH_METHOD) || |
| (ACPI_GPE_DISPATCH_TYPE(handler->original_flags) == |
| ACPI_GPE_DISPATCH_NOTIFY)) && gpe_event_info->runtime_count) { |
| handler->originally_enabled = TRUE; |
| (void)acpi_ev_remove_gpe_reference(gpe_event_info); |
| |
| /* Sanity check of original type against new type */ |
| |
| if (type != |
| (u32)(gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) { |
| ACPI_WARNING((AE_INFO, |
| "GPE type mismatch (level/edge)")); |
| } |
| } |
| |
| /* Install the handler */ |
| |
| gpe_event_info->dispatch.handler = handler; |
| |
| /* Setup up dispatch flags to indicate handler (vs. method/notify) */ |
| |
| gpe_event_info->flags &= |
| ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); |
| gpe_event_info->flags |= |
| (u8)(type | |
| (is_raw_handler ? ACPI_GPE_DISPATCH_RAW_HANDLER : |
| ACPI_GPE_DISPATCH_HANDLER)); |
| |
| acpi_os_release_lock(acpi_gbl_gpe_lock, flags); |
| |
| unlock_and_exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| return_ACPI_STATUS(status); |
| |
| free_and_exit: |
| acpi_os_release_lock(acpi_gbl_gpe_lock, flags); |
| ACPI_FREE(handler); |
| goto unlock_and_exit; |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_gpe_handler |
| * |
| * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT |
| * defined GPEs) |
| * gpe_number - The GPE number within the GPE block |
| * type - Whether this GPE should be treated as an |
| * edge- or level-triggered interrupt. |
| * address - Address of the handler |
| * context - Value passed to the handler on each GPE |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Install a handler for a General Purpose Event. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_install_gpe_handler(acpi_handle gpe_device, |
| u32 gpe_number, |
| u32 type, acpi_gpe_handler address, void *context) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_install_gpe_handler); |
| |
| status = |
| acpi_ev_install_gpe_handler(gpe_device, gpe_number, type, FALSE, |
| address, context); |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_gpe_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_gpe_raw_handler |
| * |
| * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT |
| * defined GPEs) |
| * gpe_number - The GPE number within the GPE block |
| * type - Whether this GPE should be treated as an |
| * edge- or level-triggered interrupt. |
| * address - Address of the handler |
| * context - Value passed to the handler on each GPE |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Install a handler for a General Purpose Event. |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_install_gpe_raw_handler(acpi_handle gpe_device, |
| u32 gpe_number, |
| u32 type, acpi_gpe_handler address, void *context) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_install_gpe_raw_handler); |
| |
| status = acpi_ev_install_gpe_handler(gpe_device, gpe_number, type, TRUE, |
| address, context); |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_gpe_raw_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_remove_gpe_handler |
| * |
| * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT |
| * defined GPEs) |
| * gpe_number - The event to remove a handler |
| * address - Address of the handler |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Remove a handler for a General Purpose acpi_event. |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_remove_gpe_handler(acpi_handle gpe_device, |
| u32 gpe_number, acpi_gpe_handler address) |
| { |
| struct acpi_gpe_event_info *gpe_event_info; |
| struct acpi_gpe_handler_info *handler; |
| acpi_status status; |
| acpi_cpu_flags flags; |
| |
| ACPI_FUNCTION_TRACE(acpi_remove_gpe_handler); |
| |
| /* Parameter validation */ |
| |
| if (!address) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); |
| |
| /* Ensure that we have a valid GPE number */ |
| |
| gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); |
| if (!gpe_event_info) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| /* Make sure that a handler is indeed installed */ |
| |
| if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) != |
| ACPI_GPE_DISPATCH_HANDLER) && |
| (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) != |
| ACPI_GPE_DISPATCH_RAW_HANDLER)) { |
| status = AE_NOT_EXIST; |
| goto unlock_and_exit; |
| } |
| |
| /* Make sure that the installed handler is the same */ |
| |
| if (gpe_event_info->dispatch.handler->address != address) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| /* Remove the handler */ |
| |
| handler = gpe_event_info->dispatch.handler; |
| gpe_event_info->dispatch.handler = NULL; |
| |
| /* Restore Method node (if any), set dispatch flags */ |
| |
| gpe_event_info->dispatch.method_node = handler->method_node; |
| gpe_event_info->flags &= |
| ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); |
| gpe_event_info->flags |= handler->original_flags; |
| |
| /* |
| * If the GPE was previously associated with a method and it was |
| * enabled, it should be enabled at this point to restore the |
| * post-initialization configuration. |
| */ |
| if (((ACPI_GPE_DISPATCH_TYPE(handler->original_flags) == |
| ACPI_GPE_DISPATCH_METHOD) || |
| (ACPI_GPE_DISPATCH_TYPE(handler->original_flags) == |
| ACPI_GPE_DISPATCH_NOTIFY)) && handler->originally_enabled) { |
| (void)acpi_ev_add_gpe_reference(gpe_event_info); |
| } |
| |
| acpi_os_release_lock(acpi_gbl_gpe_lock, flags); |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| |
| /* Make sure all deferred GPE tasks are completed */ |
| |
| acpi_os_wait_events_complete(); |
| |
| /* Now we can free the handler object */ |
| |
| ACPI_FREE(handler); |
| return_ACPI_STATUS(status); |
| |
| unlock_and_exit: |
| acpi_os_release_lock(acpi_gbl_gpe_lock, flags); |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_remove_gpe_handler) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_acquire_global_lock |
| * |
| * PARAMETERS: timeout - How long the caller is willing to wait |
| * handle - Where the handle to the lock is returned |
| * (if acquired) |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Acquire the ACPI Global Lock |
| * |
| * Note: Allows callers with the same thread ID to acquire the global lock |
| * multiple times. In other words, externally, the behavior of the global lock |
| * is identical to an AML mutex. On the first acquire, a new handle is |
| * returned. On any subsequent calls to acquire by the same thread, the same |
| * handle is returned. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_acquire_global_lock(u16 timeout, u32 *handle) |
| { |
| acpi_status status; |
| |
| if (!handle) { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| /* Must lock interpreter to prevent race conditions */ |
| |
| acpi_ex_enter_interpreter(); |
| |
| status = acpi_ex_acquire_mutex_object(timeout, |
| acpi_gbl_global_lock_mutex, |
| acpi_os_get_thread_id()); |
| |
| if (ACPI_SUCCESS(status)) { |
| |
| /* Return the global lock handle (updated in acpi_ev_acquire_global_lock) */ |
| |
| *handle = acpi_gbl_global_lock_handle; |
| } |
| |
| acpi_ex_exit_interpreter(); |
| return (status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_acquire_global_lock) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_release_global_lock |
| * |
| * PARAMETERS: handle - Returned from acpi_acquire_global_lock |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Release the ACPI Global Lock. The handle must be valid. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_release_global_lock(u32 handle) |
| { |
| acpi_status status; |
| |
| if (!handle || (handle != acpi_gbl_global_lock_handle)) { |
| return (AE_NOT_ACQUIRED); |
| } |
| |
| status = acpi_ex_release_mutex_object(acpi_gbl_global_lock_mutex); |
| return (status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_release_global_lock) |
| #endif /* !ACPI_REDUCED_HARDWARE */ |