Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 58fbaa5dd6522711e83d28c59350629bdf3acff6 / . / arch / arm64 / boot / dts / qcom / sdm632-regulator.dtsi
blob: 93ccc07f51b7412e6f5966931ed0bbfe3c9197ca [file] [log] [blame]
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
&pm8953_s3 {
regulator-min-microvolt = <984000>;
regulator-max-microvolt = <1240000>;
qcom,init-voltage = <984000>;
};
&pm8953_s4 {
regulator-min-microvolt = <1036000>;
regulator-max-microvolt = <2040000>;
qcom,init-voltage = <1036000>;
};
&pm8953_l1 {
regulator-min-microvolt = <975000>;
regulator-max-microvolt = <1050000>;
qcom,init-voltage = <975000>;
};
&pm8953_l2 {
regulator-min-microvolt = <975000>;
regulator-max-microvolt = <1175000>;
qcom,init-voltage = <975000>;
};
&pm8953_l10 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
qcom,init-voltage = <2800000>;
};
&pm8953_l22 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
qcom,init-voltage = <2800000>;
};
&soc {
/delete-node/ regulator@19461d4;
/delete-node/ cpr4-ctrl@b018000;
/delete-node/ regulator@194415c;
/delete-node/ ldo@185f000;
apc_mem_acc_vreg: apc-mem-acc-regulator {
compatible = "qcom,mem-acc-regulator";
regulator-name = "apc_mem_acc_corner";
regulator-min-microvolt = <1>;
regulator-max-microvolt = <3>;
qcom,acc-reg-addr-list = <0x0b1d1360 0x0b1d1364
0x0b1d1368 0x0b1d136c 0x0b1d1370>;
qcom,num-acc-corners = <3>;
qcom,boot-acc-corner = <1>;
qcom,corner1-reg-config =
/* 1 -> 1 */
<(-1) (-1)>, <(-1) (-1)>,
<(-1) (-1)>, <(-1) (-1)>, <(-1) (-1)>,
/* 1 -> 2 */
< 1 0x0>, < 2 0x0>,
< 3 0x0>, < 4 0x0>, < 5 0x0>,
/* 1 -> 3 */
< 1 0x0>, < 2 0x1>,
< 3 0x0>, < 4 0x10000>, < 5 0x0>;
qcom,corner2-reg-config =
/* 2 -> 1 */
< 1 0x0>, < 2 0x80000000>,
< 3 0x0>, < 4 0x0>, < 5 0x80000000>,
/* 2 -> 2 */
<(-1) (-1)>, <(-1) (-1)>,
<(-1) (-1)>, <(-1) (-1)>, <(-1) (-1)>,
/* 2 -> 3 */
< 1 0x0>, < 2 0x1>,
< 3 0x0>, < 4 0x10000>, < 5 0x0>;
qcom,corner3-reg-config =
/* 3 -> 1 */
< 1 0x0>, < 2 0x80000000>,
< 3 0x0>, < 4 0x0>, < 5 0x80000000>,
/* 3 -> 2 */
< 1 0x0>, < 2 0x0>,
< 3 0x0>, < 4 0x0>, < 5 0x0>,
/* 3 -> 3 */
<(-1) (-1)>, <(-1) (-1)>,
<(-1) (-1)>, <(-1) (-1)>, <(-1) (-1)>;
};
apc_cpr: cpr4-ctrl@b018000 {
compatible = "qcom,cpr4-sdm632-apss-regulator";
reg = <0xb018000 0x4000>, <0xa4000 0x1000>;
reg-names = "cpr_ctrl", "fuse_base";
interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "cpr";
qcom,cpr-ctrl-name = "apc";
qcom,cpr-sensor-time = <1000>;
qcom,cpr-loop-time = <5000000>;
qcom,cpr-idle-cycles = <15>;
qcom,cpr-step-quot-init-min = <12>;
qcom,cpr-step-quot-init-max = <14>;
qcom,cpr-count-mode = <0>; /* All-at-once */
qcom,cpr-count-repeat = <14>;
qcom,cpr-down-error-step-limit = <1>;
qcom,cpr-up-error-step-limit = <1>;
qcom,apm-ctrl = <&apc_apm>;
qcom,apm-threshold-voltage = <875000>;
qcom,apm-hysteresis-voltage = <20000>;
vdd-supply = <&pm8953_s5>;
qcom,voltage-step = <5000>;
vdd-limit-supply = <&pm8953_s5_limit>;
mem-acc-supply = <&apc_mem_acc_vreg>;
qcom,cpr-panic-reg-addr-list =
<0xb1d2c18 0xb1d2900 0x0b1112b0 0xb018798>;
qcom,cpr-panic-reg-name-list =
"CCI_SAW4_PMIC_STS", "CCI_SAW4_VCTL",
"APCS_ALIAS0_APM_CTLER_STATUS",
"APCS0_CPR_CORE_ADJ_MODE_REG";
thread@0 {
qcom,cpr-thread-id = <0>;
qcom,cpr-consecutive-up = <0>;
qcom,cpr-consecutive-down = <2>;
qcom,cpr-up-threshold = <2>;
qcom,cpr-down-threshold = <1>;
apc0_pwrcl_vreg: regulator {
regulator-name = "apc0_pwrcl_corner";
regulator-min-microvolt = <1>;
regulator-max-microvolt = <7>;
qcom,cpr-fuse-corners = <4>;
qcom,cpr-fuse-combos = <64>;
qcom,cpr-corners = <7>;
qcom,cpr-corner-fmax-map = <1 3 4 7>;
qcom,cpr-voltage-ceiling =
<720000 790000 865000 865000 920000
990000 1065000>;
qcom,cpr-voltage-floor =
<500000 500000 500000 500000 500000
500000 500000>;
qcom,mem-acc-voltage = <1 1 2 2 2 2 3>;
qcom,corner-frequencies =
<614400000 883200000 1036800000
1363200000 1536000000 1670400000
1804800000>;
qcom,cpr-ro-scaling-factor =
<3600 3600 3830 2430 2520 2700 1790 1760
1970 1880 2110 2010 2510 4900 4370 4780>,
<3600 3600 3830 2430 2520 2700 1790 1760
1970 1880 2110 2010 2510 4900 4370 4780>,
<3600 3600 3830 2430 2520 2700 1790 1760
1970 1880 2110 2010 2510 4900 4370 4780>,
<3600 3600 3830 2430 2520 2700 1790 1760
1970 1880 2110 2010 2510 4900 4370 4780>;
qcom,allow-voltage-interpolation;
qcom,allow-quotient-interpolation;
qcom,cpr-scaled-open-loop-voltage-as-ceiling;
};
};
thread@1 {
qcom,cpr-thread-id = <1>;
qcom,cpr-consecutive-up = <0>;
qcom,cpr-consecutive-down = <2>;
qcom,cpr-up-threshold = <2>;
qcom,cpr-down-threshold = <1>;
apc1_perfcl_vreg: regulator {
regulator-name = "apc1_perfcl_corner";
regulator-min-microvolt = <1>;
regulator-max-microvolt = <7>;
qcom,cpr-fuse-corners = <4>;
qcom,cpr-fuse-combos = <64>;
qcom,cpr-corners = <7>;
qcom,cpr-corner-fmax-map = <1 3 4 7>;
qcom,cpr-voltage-ceiling =
<720000 790000 865000 865000 920000
990000 1065000>;
qcom,cpr-voltage-floor =
<500000 500000 500000 500000 500000
500000 500000>;
qcom,mem-acc-voltage = <1 1 2 2 2 2 3>;
qcom,corner-frequencies =
<633600000 902400000 1094400000
1401600000 1555200000 1804800000
2016000000>;
qcom,cpr-ro-scaling-factor =
<3600 3600 3830 2430 2520 2700 1790 1760
1970 1880 2110 2010 2510 4900 4370 4780>,
<3600 3600 3830 2430 2520 2700 1790 1760
1970 1880 2110 2010 2510 4900 4370 4780>,
<3600 3600 3830 2430 2520 2700 1790 1760
1970 1880 2110 2010 2510 4900 4370 4780>,
<3600 3600 3830 2430 2520 2700 1790 1760
1970 1880 2110 2010 2510 4900 4370 4780>;
qcom,allow-voltage-interpolation;
qcom,allow-quotient-interpolation;
qcom,cpr-scaled-open-loop-voltage-as-ceiling;
qcom,cpr-open-loop-voltage-fuse-adjustment =
/* Speed bin 0; CPR rev 0..7 */
< 30000 0 0 0>,
< 30000 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 1; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 2; CPR rev 0..7 */
< 30000 0 0 0>,
< 30000 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 3; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 4; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 5; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 6; CPR rev 0..7 */
< 30000 0 0 0>,
< 30000 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 7; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>;
qcom,cpr-closed-loop-voltage-fuse-adjustment =
/* Speed bin 0; CPR rev 0..7 */
< 30000 0 0 0>,
< 30000 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 1; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 2; CPR rev 0..7 */
< 30000 0 0 0>,
< 30000 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 3; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 4; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 5; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 6; CPR rev 0..7 */
< 30000 0 0 0>,
< 30000 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
/* Speed bin 7; CPR rev 0..7 */
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>,
< 0 0 0 0>;
};
};
};
gfx_mem_acc: regulator@194415c {
compatible = "qcom,mem-acc-regulator";
reg = <0x0194415c 0x4>;
reg-names = "acc-sel-l1";
regulator-name = "gfx_mem_acc_corner";
regulator-min-microvolt = <1>;
regulator-max-microvolt = <2>;
qcom,acc-sel-l1-bit-pos = <0>;
qcom,acc-sel-l1-bit-size = <1>;
qcom,corner-acc-map = <0x1 0x0>;
};
gfx_vreg_corner: ldo@185f000 {
compatible = "qcom,msm8953-gfx-ldo";
reg = <0x0185f000 0x30>, <0xa4000 0x1000>;
reg-names = "ldo_addr", "efuse_addr";
regulator-name = "msm_gfx_ldo";
regulator-min-microvolt = <1>;
regulator-max-microvolt = <7>;
qcom,ldo-voltage-ceiling = <620000 680000 750000>;
qcom,ldo-voltage-floor = <510000 510000 600000>;
qcom,num-corners = <7>;
qcom,num-ldo-corners = <3>;
qcom,ldo-enable-corner-map = <0 0 0 0 0 0 0>;
qcom,init-corner = <4>;
vdd-cx-supply = <&pm8953_s2_level>;
qcom,vdd-cx-corner-map = <RPM_SMD_REGULATOR_LEVEL_LOW_SVS>,
<RPM_SMD_REGULATOR_LEVEL_LOW_SVS>,
<RPM_SMD_REGULATOR_LEVEL_SVS>,
<RPM_SMD_REGULATOR_LEVEL_SVS_PLUS>,
<RPM_SMD_REGULATOR_LEVEL_NOM>,
<RPM_SMD_REGULATOR_LEVEL_NOM_PLUS>,
<RPM_SMD_REGULATOR_LEVEL_TURBO>;
mem-acc-supply = <&gfx_mem_acc>;
qcom,mem-acc-corner-map = <1 1 1 2 2 2 2>;
};
dbu3: dbu3 {
compatible = "regulator-fixed";
regulator-name = "dbu3";
startup-delay-us = <0>;
enable-active-high;
};
};