| /* |
| * MPC8378E MDS Device Tree Source |
| * |
| * Copyright 2007 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "fsl,mpc8378emds"; |
| compatible = "fsl,mpc8378emds","fsl,mpc837xmds"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8378@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <0x20>; |
| i-cache-line-size = <0x20>; |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x20000000>; // 512MB at 0 |
| }; |
| |
| soc@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| ranges = <0x0 0xe0000000 0x00100000>; |
| reg = <0xe0000000 0x00000200>; |
| bus-frequency = <0>; |
| |
| wdt@200 { |
| compatible = "mpc83xx_wdt"; |
| reg = <0x200 0x100>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <0xe 0x8>; |
| interrupt-parent = < &ipic >; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <0xf 0x8>; |
| interrupt-parent = < &ipic >; |
| dfsrr; |
| }; |
| |
| spi@7000 { |
| compatible = "fsl_spi"; |
| reg = <0x7000 0x1000>; |
| interrupts = <0x10 0x8>; |
| interrupt-parent = < &ipic >; |
| mode = "cpu"; |
| }; |
| |
| /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ |
| usb@23000 { |
| compatible = "fsl-usb2-dr"; |
| reg = <0x23000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = < &ipic >; |
| interrupts = <0x26 0x8>; |
| phy_type = "utmi_wide"; |
| }; |
| |
| mdio@24520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x24520 0x20>; |
| phy2: ethernet-phy@2 { |
| interrupt-parent = < &ipic >; |
| interrupts = <0x11 0x8>; |
| reg = <2>; |
| device_type = "ethernet-phy"; |
| }; |
| phy3: ethernet-phy@3 { |
| interrupt-parent = < &ipic >; |
| interrupts = <0x12 0x8>; |
| reg = <3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>; |
| phy-connection-type = "mii"; |
| interrupt-parent = < &ipic >; |
| phy-handle = < &phy2 >; |
| }; |
| |
| enet1: ethernet@25000 { |
| cell-index = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x25000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>; |
| phy-connection-type = "mii"; |
| interrupt-parent = < &ipic >; |
| phy-handle = < &phy3 >; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <0x9 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <0xa 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| crypto@30000 { |
| model = "SEC3"; |
| compatible = "talitos"; |
| reg = <0x30000 0x10000>; |
| interrupts = <0xb 0x8>; |
| interrupt-parent = < &ipic >; |
| /* Rev. 3.0 geometry */ |
| num-channels = <4>; |
| channel-fifo-len = <0x18>; |
| exec-units-mask = <0x000001fe>; |
| descriptor-types-mask = <0x03ab0ebf>; |
| }; |
| |
| sdhc@2e000 { |
| model = "eSDHC"; |
| compatible = "fsl,esdhc"; |
| reg = <0x2e000 0x1000>; |
| interrupts = <0x2a 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| /* IPIC |
| * interrupts cell = <intr #, sense> |
| * sense values match linux IORESOURCE_IRQ_* defines: |
| * sense == 8: Level, low assertion |
| * sense == 2: Edge, high-to-low change |
| */ |
| ipic: pic@700 { |
| compatible = "fsl,ipic"; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x700 0x100>; |
| }; |
| }; |
| |
| pci0: pci@e0008500 { |
| cell-index = <0>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x11 */ |
| 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8 |
| 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8 |
| 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8 |
| 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8 |
| |
| /* IDSEL 0x12 */ |
| 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8 |
| 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8 |
| 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8 |
| 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8 |
| |
| /* IDSEL 0x13 */ |
| 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8 |
| 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8 |
| 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8 |
| 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8 |
| |
| /* IDSEL 0x15 */ |
| 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8 |
| 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8 |
| 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8 |
| 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8 |
| |
| /* IDSEL 0x16 */ |
| 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8 |
| 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8 |
| 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8 |
| 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8 |
| |
| /* IDSEL 0x17 */ |
| 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8 |
| 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8 |
| 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8 |
| 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8 |
| |
| /* IDSEL 0x18 */ |
| 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8 |
| 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8 |
| 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8 |
| 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>; |
| interrupt-parent = < &ipic >; |
| interrupts = <0x42 0x8>; |
| bus-range = <0 0>; |
| ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 |
| 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; |
| clock-frequency = <0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe0008500 0x100>; |
| compatible = "fsl,mpc8349-pci"; |
| device_type = "pci"; |
| }; |
| }; |