blob: e03e60bbfd855f01301ab14d71b1fc9d94453bcc [file] [log] [blame]
/*
* LCD / Backlight control code for Sharp SL-6000x (tosa)
*
* Copyright (c) 2005 Dirk Opfer
* Copyright (c) 2007,2008 Dmitry Baryshkov
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/slab.h>
#include <asm/mach/sharpsl_param.h>
#include <mach/tosa.h>
#define COMADJ_DEFAULT 97
#define DAC_CH1 0
#define DAC_CH2 1
struct tosa_bl_data {
struct i2c_client *i2c;
struct backlight_device *bl;
int comadj;
};
static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness)
{
struct spi_device *spi = data->i2c->dev.platform_data;
i2c_smbus_write_byte_data(data->i2c, DAC_CH1, data->comadj);
/* SetBacklightDuty */
i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff));
/* SetBacklightVR */
gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100);
tosa_bl_enable(spi, brightness);
}
static int tosa_bl_update_status(struct backlight_device *dev)
{
struct backlight_properties *props = &dev->props;
struct tosa_bl_data *data = dev_get_drvdata(&dev->dev);
int power = max(props->power, props->fb_blank);
int brightness = props->brightness;
if (power)
brightness = 0;
tosa_bl_set_backlight(data, brightness);
return 0;
}
static int tosa_bl_get_brightness(struct backlight_device *dev)
{
struct backlight_properties *props = &dev->props;
return props->brightness;
}
static const struct backlight_ops bl_ops = {
.get_brightness = tosa_bl_get_brightness,
.update_status = tosa_bl_update_status,
};
static int __devinit tosa_bl_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct backlight_properties props;
struct tosa_bl_data *data = kzalloc(sizeof(struct tosa_bl_data), GFP_KERNEL);
int ret = 0;
if (!data)
return -ENOMEM;
data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
ret = gpio_request(TOSA_GPIO_BL_C20MA, "backlight");
if (ret) {
dev_dbg(&data->bl->dev, "Unable to request gpio!\n");
goto err_gpio_bl;
}
ret = gpio_direction_output(TOSA_GPIO_BL_C20MA, 0);
if (ret)
goto err_gpio_dir;
i2c_set_clientdata(client, data);
data->i2c = client;
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 512 - 1;
data->bl = backlight_device_register("tosa-bl", &client->dev, data,
&bl_ops, &props);
if (IS_ERR(data->bl)) {
ret = PTR_ERR(data->bl);
goto err_reg;
}
data->bl->props.brightness = 69;
data->bl->props.power = FB_BLANK_UNBLANK;
backlight_update_status(data->bl);
return 0;
err_reg:
data->bl = NULL;
i2c_set_clientdata(client, NULL);
err_gpio_dir:
gpio_free(TOSA_GPIO_BL_C20MA);
err_gpio_bl:
kfree(data);
return ret;
}
static int __devexit tosa_bl_remove(struct i2c_client *client)
{
struct tosa_bl_data *data = i2c_get_clientdata(client);
backlight_device_unregister(data->bl);
data->bl = NULL;
i2c_set_clientdata(client, NULL);
gpio_free(TOSA_GPIO_BL_C20MA);
kfree(data);
return 0;
}
#ifdef CONFIG_PM
static int tosa_bl_suspend(struct i2c_client *client, pm_message_t pm)
{
struct tosa_bl_data *data = i2c_get_clientdata(client);
tosa_bl_set_backlight(data, 0);
return 0;
}
static int tosa_bl_resume(struct i2c_client *client)
{
struct tosa_bl_data *data = i2c_get_clientdata(client);
backlight_update_status(data->bl);
return 0;
}
#else
#define tosa_bl_suspend NULL
#define tosa_bl_resume NULL
#endif
static const struct i2c_device_id tosa_bl_id[] = {
{ "tosa-bl", 0 },
{ },
};
static struct i2c_driver tosa_bl_driver = {
.driver = {
.name = "tosa-bl",
.owner = THIS_MODULE,
},
.probe = tosa_bl_probe,
.remove = __devexit_p(tosa_bl_remove),
.suspend = tosa_bl_suspend,
.resume = tosa_bl_resume,
.id_table = tosa_bl_id,
};
static int __init tosa_bl_init(void)
{
return i2c_add_driver(&tosa_bl_driver);
}
static void __exit tosa_bl_exit(void)
{
i2c_del_driver(&tosa_bl_driver);
}
module_init(tosa_bl_init);
module_exit(tosa_bl_exit);
MODULE_AUTHOR("Dmitry Baryshkov");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA");