sh: add support for J-Core J2 processor
At the CPU/ISA level, the J2 is compatible with SH-2, and thus the
changes to add J2 support build on existing SH-2 support. However, J2
does not duplicate the memory-mapped SH-2 features like the cache
interface. Instead, the cache interfaces is described in the device
tree, and new code is added to be able to access the flat device tree
at early boot before it is unflattened.
Support is also added for receiving interrupts on trap numbers in the
range 16 to 31, since the J-Core aic1 interrupt controller generates
these traps. This range was unused but nominally for hardware
exceptions on SH-2, and a few values in this range were used for
exceptions on SH-2A, but SH-2A has its own version of the relevant
code.
No individual cpu subtypes are added for J2 since the intent moving
forward is to represent SoCs with device tree rather than as
hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item
exists only to fit into the existing cpu selection mechanism until it
is overhauled.
Signed-off-by: Rich Felker <dalias@libc.org>
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index df6339d..2ef6f65 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -186,6 +186,12 @@
select CPU_SH2
select UNCACHED_MAPPING
+config CPU_J2
+ bool
+ select CPU_SH2
+ select OF
+ select OF_EARLY_FLATTREE
+
config CPU_SH3
bool
select CPU_HAS_INTEVT
@@ -252,6 +258,10 @@
select CPU_SH2
select SYS_SUPPORTS_SH_CMT
+config CPU_SUBTYPE_J2
+ bool "Support J2 processor"
+ select CPU_J2
+
# SH-2A Processor Support
config CPU_SUBTYPE_SH7201
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 3b2c8b4..0047666 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -31,6 +31,7 @@
endif
cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
+cflags-$(CONFIG_CPU_J2) := $(call cc-option,-mj2,)
cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \
$(call cc-option,-m2a-nofpu,) \
$(call cc-option,-m4-nofpu,)
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 1506897..f9a0994 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -15,7 +15,7 @@
*/
enum cpu_type {
/* SH-2 types */
- CPU_SH7619,
+ CPU_SH7619, CPU_J2,
/* SH-2A types */
CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_SH7269,
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index bfd9e27..c8b3be1 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -106,7 +106,7 @@
/*
* Generic first-level cache init
*/
-#ifdef CONFIG_SUPERH32
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_CPU_J2)
static void cache_init(void)
{
unsigned long ccr, flags;
diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c
index 9e6624c..4df4b28 100644
--- a/arch/sh/kernel/cpu/proc.c
+++ b/arch/sh/kernel/cpu/proc.c
@@ -27,6 +27,7 @@
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
[CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
[CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734",
+ [CPU_J2] = "J2",
[CPU_SH_NONE] = "Unknown"
};
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index a150595..16bde0e 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -147,6 +147,11 @@
mov #31,r8
cmp/hs r8,r9
bt trap_entry ! 64 > vec >= 31 is trap
+#ifdef CONFIG_CPU_J2
+ mov #16,r8
+ cmp/hs r8,r9
+ bt interrupt_entry ! 31 > vec >= 16 is interrupt
+#endif
mov.l 4f,r8
mov r9,r4
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index 6c687ae..1521840 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -10,10 +10,27 @@
* for more details.
*/
#include <linux/init.h>
+#include <linux/of_fdt.h>
+#include <linux/smp.h>
+#include <linux/io.h>
#include <asm/processor.h>
#include <asm/cache.h>
-void cpu_probe(void)
+#if defined(CONFIG_CPU_J2)
+extern u32 __iomem *j2_ccr_base;
+static int __init scan_cache(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ if (!of_flat_dt_is_compatible(node, "jcore,cache"))
+ return 0;
+
+ j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
+
+ return 1;
+}
+#endif
+
+void __ref cpu_probe(void)
{
#if defined(CONFIG_CPU_SUBTYPE_SH7619)
boot_cpu_data.type = CPU_SH7619;
@@ -24,10 +41,28 @@
boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
boot_cpu_data.dcache.flags = 0;
#endif
+
+#if defined(CONFIG_CPU_J2)
+ unsigned cpu = hard_smp_processor_id();
+ if (cpu == 0) of_scan_flat_dt(scan_cache, NULL);
+ if (j2_ccr_base) __raw_writel(0x80000303, j2_ccr_base + 4*cpu);
+ if (cpu != 0) return;
+ boot_cpu_data.type = CPU_J2;
+
+ /* These defaults are appropriate for the original/current
+ * J2 cache. Once there is a proper framework for getting cache
+ * info from device tree, we should switch to that. */
+ boot_cpu_data.dcache.ways = 1;
+ boot_cpu_data.dcache.sets = 256;
+ boot_cpu_data.dcache.entry_shift = 5;
+ boot_cpu_data.dcache.linesz = 32;
+ boot_cpu_data.dcache.flags = 0;
+#else
/*
* SH-2 doesn't have separate caches
*/
boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
+#endif
boot_cpu_data.icache = boot_cpu_data.dcache;
boot_cpu_data.family = CPU_FAMILY_SH2;
}
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index cee6b99..92c3bd9 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -4,7 +4,8 @@
obj-y := alignment.o cache.o init.o consistent.o mmap.o
-cacheops-$(CONFIG_CPU_SH2) := cache-sh2.o
+cacheops-$(CONFIG_CPU_J2) := cache-j2.o
+cacheops-$(CONFIG_CPU_SUBTYPE_SH7619) := cache-sh2.o
cacheops-$(CONFIG_CPU_SH2A) := cache-sh2a.o
cacheops-$(CONFIG_CPU_SH3) := cache-sh3.o
cacheops-$(CONFIG_CPU_SH4) := cache-sh4.o flush-sh4.o
diff --git a/arch/sh/mm/cache-j2.c b/arch/sh/mm/cache-j2.c
new file mode 100644
index 0000000..391698b
--- /dev/null
+++ b/arch/sh/mm/cache-j2.c
@@ -0,0 +1,65 @@
+/*
+ * arch/sh/mm/cache-j2.c
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/cpumask.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+#define ICACHE_ENABLE 0x1
+#define DCACHE_ENABLE 0x2
+#define CACHE_ENABLE (ICACHE_ENABLE | DCACHE_ENABLE)
+#define ICACHE_FLUSH 0x100
+#define DCACHE_FLUSH 0x200
+#define CACHE_FLUSH (ICACHE_FLUSH | DCACHE_FLUSH)
+
+u32 __iomem *j2_ccr_base;
+
+static void j2_flush_icache(void *args)
+{
+ unsigned cpu;
+ for_each_possible_cpu(cpu)
+ __raw_writel(CACHE_ENABLE | ICACHE_FLUSH, j2_ccr_base + cpu);
+}
+
+static void j2_flush_dcache(void *args)
+{
+ unsigned cpu;
+ for_each_possible_cpu(cpu)
+ __raw_writel(CACHE_ENABLE | DCACHE_FLUSH, j2_ccr_base + cpu);
+}
+
+static void j2_flush_both(void *args)
+{
+ unsigned cpu;
+ for_each_possible_cpu(cpu)
+ __raw_writel(CACHE_ENABLE | CACHE_FLUSH, j2_ccr_base + cpu);
+}
+
+void __init j2_cache_init(void)
+{
+ if (!j2_ccr_base)
+ return;
+
+ local_flush_cache_all = j2_flush_both;
+ local_flush_cache_mm = j2_flush_both;
+ local_flush_cache_dup_mm = j2_flush_both;
+ local_flush_cache_page = j2_flush_both;
+ local_flush_cache_range = j2_flush_both;
+ local_flush_dcache_page = j2_flush_dcache;
+ local_flush_icache_range = j2_flush_icache;
+ local_flush_icache_page = j2_flush_icache;
+ local_flush_cache_sigtramp = j2_flush_icache;
+
+ pr_info("Initial J2 CCR is %.8x\n", __raw_readl(j2_ccr_base));
+}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 776d664..70cc52f 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -309,7 +309,11 @@
if (unlikely(cache_disabled))
goto skip;
- if (boot_cpu_data.family == CPU_FAMILY_SH2) {
+ if (boot_cpu_data.type == CPU_J2) {
+ extern void __weak j2_cache_init(void);
+
+ j2_cache_init();
+ } else if (boot_cpu_data.family == CPU_FAMILY_SH2) {
extern void __weak sh2_cache_init(void);
sh2_cache_init();