| /* |
| * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. |
| * Copyright(c) 2006 Chris Snook <csnook@redhat.com> |
| * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com> |
| * |
| * Derived from Intel e1000 driver |
| * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called COPYING. |
| * |
| * Contact Information: |
| * Xiong Huang <xiong_huang@attansic.com> |
| * Attansic Technology Corp. 3F 147, Xianzheng 9th Road, Zhubei, |
| * Xinzhu 302, TAIWAN, REPUBLIC OF CHINA |
| * |
| * Chris Snook <csnook@redhat.com> |
| * Jay Cliburn <jcliburn@gmail.com> |
| * |
| * This version is adapted from the Attansic reference driver for |
| * inclusion in the Linux kernel. It is currently under heavy development. |
| * A very incomplete list of things that need to be dealt with: |
| * |
| * TODO: |
| * Fix TSO; tx performance is horrible with TSO enabled. |
| * Wake on LAN. |
| * Add more ethtool functions. |
| * Fix abstruse irq enable/disable condition described here: |
| * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 |
| * |
| * NEEDS TESTING: |
| * VLAN |
| * multicast |
| * promiscuous mode |
| * interrupt coalescing |
| * SMP torture testing |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/netdevice.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/skbuff.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_vlan.h> |
| #include <linux/if_ether.h> |
| #include <linux/irqreturn.h> |
| #include <linux/workqueue.h> |
| #include <linux/timer.h> |
| #include <linux/jiffies.h> |
| #include <linux/hardirq.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqflags.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/net.h> |
| #include <linux/pm.h> |
| #include <linux/in.h> |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/compiler.h> |
| #include <linux/delay.h> |
| #include <linux/mii.h> |
| #include <net/checksum.h> |
| |
| #include <asm/atomic.h> |
| #include <asm/byteorder.h> |
| |
| #include "atl1.h" |
| |
| #define DRIVER_VERSION "2.0.7" |
| |
| char atl1_driver_name[] = "atl1"; |
| static const char atl1_driver_string[] = "Attansic L1 Ethernet Network Driver"; |
| static const char atl1_copyright[] = "Copyright(c) 2005-2006 Attansic Corporation."; |
| char atl1_driver_version[] = DRIVER_VERSION; |
| |
| MODULE_AUTHOR |
| ("Attansic Corporation <xiong_huang@attansic.com>, Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>"); |
| MODULE_DESCRIPTION("Attansic 1000M Ethernet Network Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRIVER_VERSION); |
| |
| /* |
| * atl1_pci_tbl - PCI Device ID Table |
| */ |
| static const struct pci_device_id atl1_pci_tbl[] = { |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)}, |
| /* required last entry */ |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); |
| |
| /* |
| * atl1_sw_init - Initialize general software structures (struct atl1_adapter) |
| * @adapter: board private structure to initialize |
| * |
| * atl1_sw_init initializes the Adapter private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| */ |
| static int __devinit atl1_sw_init(struct atl1_adapter *adapter) |
| { |
| struct atl1_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| |
| hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; |
| |
| adapter->wol = 0; |
| adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; |
| adapter->ict = 50000; /* 100ms */ |
| adapter->link_speed = SPEED_0; /* hardware init */ |
| adapter->link_duplex = FULL_DUPLEX; |
| |
| hw->phy_configured = false; |
| hw->preamble_len = 7; |
| hw->ipgt = 0x60; |
| hw->min_ifg = 0x50; |
| hw->ipgr1 = 0x40; |
| hw->ipgr2 = 0x60; |
| hw->max_retry = 0xf; |
| hw->lcol = 0x37; |
| hw->jam_ipg = 7; |
| hw->rfd_burst = 8; |
| hw->rrd_burst = 8; |
| hw->rfd_fetch_gap = 1; |
| hw->rx_jumbo_th = adapter->rx_buffer_len / 8; |
| hw->rx_jumbo_lkah = 1; |
| hw->rrd_ret_timer = 16; |
| hw->tpd_burst = 4; |
| hw->tpd_fetch_th = 16; |
| hw->txf_burst = 0x100; |
| hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; |
| hw->tpd_fetch_gap = 1; |
| hw->rcb_value = atl1_rcb_64; |
| hw->dma_ord = atl1_dma_ord_enh; |
| hw->dmar_block = atl1_dma_req_256; |
| hw->dmaw_block = atl1_dma_req_256; |
| hw->cmb_rrd = 4; |
| hw->cmb_tpd = 4; |
| hw->cmb_rx_timer = 1; /* about 2us */ |
| hw->cmb_tx_timer = 1; /* about 2us */ |
| hw->smb_timer = 100000; /* about 200ms */ |
| |
| spin_lock_init(&adapter->lock); |
| spin_lock_init(&adapter->mb_lock); |
| |
| return 0; |
| } |
| |
| static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| u16 result; |
| |
| atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); |
| |
| return result; |
| } |
| |
| static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, |
| int val) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| |
| atl1_write_phy_reg(&adapter->hw, reg_num, val); |
| } |
| |
| /* |
| * atl1_mii_ioctl - |
| * @netdev: |
| * @ifreq: |
| * @cmd: |
| */ |
| static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| unsigned long flags; |
| int retval; |
| |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| |
| return retval; |
| } |
| |
| /* |
| * atl1_ioctl - |
| * @netdev: |
| * @ifreq: |
| * @cmd: |
| */ |
| static int atl1_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| case SIOCGMIIREG: |
| case SIOCSMIIREG: |
| return atl1_mii_ioctl(netdev, ifr, cmd); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /* |
| * atl1_setup_mem_resources - allocate Tx / RX descriptor resources |
| * @adapter: board private structure |
| * |
| * Return 0 on success, negative on failure |
| */ |
| s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1_ring_header *ring_header = &adapter->ring_header; |
| struct pci_dev *pdev = adapter->pdev; |
| int size; |
| u8 offset = 0; |
| |
| size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); |
| tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); |
| if (unlikely(!tpd_ring->buffer_info)) { |
| dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size); |
| goto err_nomem; |
| } |
| rfd_ring->buffer_info = |
| (struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count); |
| |
| /* real ring DMA buffer |
| * each ring/block may need up to 8 bytes for alignment, hence the |
| * additional 40 bytes tacked onto the end. |
| */ |
| ring_header->size = size = |
| sizeof(struct tx_packet_desc) * tpd_ring->count |
| + sizeof(struct rx_free_desc) * rfd_ring->count |
| + sizeof(struct rx_return_desc) * rrd_ring->count |
| + sizeof(struct coals_msg_block) |
| + sizeof(struct stats_msg_block) |
| + 40; |
| |
| ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, |
| &ring_header->dma); |
| if (unlikely(!ring_header->desc)) { |
| dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); |
| goto err_nomem; |
| } |
| |
| memset(ring_header->desc, 0, ring_header->size); |
| |
| /* init TPD ring */ |
| tpd_ring->dma = ring_header->dma; |
| offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; |
| tpd_ring->dma += offset; |
| tpd_ring->desc = (u8 *) ring_header->desc + offset; |
| tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; |
| |
| /* init RFD ring */ |
| rfd_ring->dma = tpd_ring->dma + tpd_ring->size; |
| offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; |
| rfd_ring->dma += offset; |
| rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); |
| rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; |
| |
| |
| /* init RRD ring */ |
| rrd_ring->dma = rfd_ring->dma + rfd_ring->size; |
| offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; |
| rrd_ring->dma += offset; |
| rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); |
| rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; |
| |
| |
| /* init CMB */ |
| adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; |
| offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; |
| adapter->cmb.dma += offset; |
| adapter->cmb.cmb = (struct coals_msg_block *) |
| ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); |
| |
| /* init SMB */ |
| adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); |
| offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; |
| adapter->smb.dma += offset; |
| adapter->smb.smb = (struct stats_msg_block *) |
| ((u8 *) adapter->cmb.cmb + |
| (sizeof(struct coals_msg_block) + offset)); |
| |
| return ATL1_SUCCESS; |
| |
| err_nomem: |
| kfree(tpd_ring->buffer_info); |
| return -ENOMEM; |
| } |
| |
| static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| |
| atomic_set(&tpd_ring->next_to_use, 0); |
| atomic_set(&tpd_ring->next_to_clean, 0); |
| |
| rfd_ring->next_to_clean = 0; |
| atomic_set(&rfd_ring->next_to_use, 0); |
| |
| rrd_ring->next_to_use = 0; |
| atomic_set(&rrd_ring->next_to_clean, 0); |
| } |
| |
| /* |
| * atl1_clean_rx_ring - Free RFD Buffers |
| * @adapter: board private structure |
| */ |
| static void atl1_clean_rx_ring(struct atl1_adapter *adapter) |
| { |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1_buffer *buffer_info; |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned long size; |
| unsigned int i; |
| |
| /* Free all the Rx ring sk_buffs */ |
| for (i = 0; i < rfd_ring->count; i++) { |
| buffer_info = &rfd_ring->buffer_info[i]; |
| if (buffer_info->dma) { |
| pci_unmap_page(pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_FROMDEVICE); |
| buffer_info->dma = 0; |
| } |
| if (buffer_info->skb) { |
| dev_kfree_skb(buffer_info->skb); |
| buffer_info->skb = NULL; |
| } |
| } |
| |
| size = sizeof(struct atl1_buffer) * rfd_ring->count; |
| memset(rfd_ring->buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(rfd_ring->desc, 0, rfd_ring->size); |
| |
| rfd_ring->next_to_clean = 0; |
| atomic_set(&rfd_ring->next_to_use, 0); |
| |
| rrd_ring->next_to_use = 0; |
| atomic_set(&rrd_ring->next_to_clean, 0); |
| } |
| |
| /* |
| * atl1_clean_tx_ring - Free Tx Buffers |
| * @adapter: board private structure |
| */ |
| static void atl1_clean_tx_ring(struct atl1_adapter *adapter) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_buffer *buffer_info; |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned long size; |
| unsigned int i; |
| |
| /* Free all the Tx ring sk_buffs */ |
| for (i = 0; i < tpd_ring->count; i++) { |
| buffer_info = &tpd_ring->buffer_info[i]; |
| if (buffer_info->dma) { |
| pci_unmap_page(pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_TODEVICE); |
| buffer_info->dma = 0; |
| } |
| } |
| |
| for (i = 0; i < tpd_ring->count; i++) { |
| buffer_info = &tpd_ring->buffer_info[i]; |
| if (buffer_info->skb) { |
| dev_kfree_skb_any(buffer_info->skb); |
| buffer_info->skb = NULL; |
| } |
| } |
| |
| size = sizeof(struct atl1_buffer) * tpd_ring->count; |
| memset(tpd_ring->buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(tpd_ring->desc, 0, tpd_ring->size); |
| |
| atomic_set(&tpd_ring->next_to_use, 0); |
| atomic_set(&tpd_ring->next_to_clean, 0); |
| } |
| |
| /* |
| * atl1_free_ring_resources - Free Tx / RX descriptor Resources |
| * @adapter: board private structure |
| * |
| * Free all transmit software resources |
| */ |
| void atl1_free_ring_resources(struct atl1_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1_ring_header *ring_header = &adapter->ring_header; |
| |
| atl1_clean_tx_ring(adapter); |
| atl1_clean_rx_ring(adapter); |
| |
| kfree(tpd_ring->buffer_info); |
| pci_free_consistent(pdev, ring_header->size, ring_header->desc, |
| ring_header->dma); |
| |
| tpd_ring->buffer_info = NULL; |
| tpd_ring->desc = NULL; |
| tpd_ring->dma = 0; |
| |
| rfd_ring->buffer_info = NULL; |
| rfd_ring->desc = NULL; |
| rfd_ring->dma = 0; |
| |
| rrd_ring->desc = NULL; |
| rrd_ring->dma = 0; |
| } |
| |
| static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) |
| { |
| u32 value; |
| struct atl1_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| /* Config MAC CTRL Register */ |
| value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; |
| /* duplex */ |
| if (FULL_DUPLEX == adapter->link_duplex) |
| value |= MAC_CTRL_DUPLX; |
| /* speed */ |
| value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? |
| MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << |
| MAC_CTRL_SPEED_SHIFT); |
| /* flow control */ |
| value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); |
| /* PAD & CRC */ |
| value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); |
| /* preamble length */ |
| value |= (((u32) adapter->hw.preamble_len |
| & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); |
| /* vlan */ |
| if (adapter->vlgrp) |
| value |= MAC_CTRL_RMV_VLAN; |
| /* rx checksum |
| if (adapter->rx_csum) |
| value |= MAC_CTRL_RX_CHKSUM_EN; |
| */ |
| /* filter mode */ |
| value |= MAC_CTRL_BC_EN; |
| if (netdev->flags & IFF_PROMISC) |
| value |= MAC_CTRL_PROMIS_EN; |
| else if (netdev->flags & IFF_ALLMULTI) |
| value |= MAC_CTRL_MC_ALL_EN; |
| /* value |= MAC_CTRL_LOOPBACK; */ |
| iowrite32(value, hw->hw_addr + REG_MAC_CTRL); |
| } |
| |
| /* |
| * atl1_set_mac - Change the Ethernet Address of the NIC |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int atl1_set_mac(struct net_device *netdev, void *p) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct sockaddr *addr = p; |
| |
| if (netif_running(netdev)) |
| return -EBUSY; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); |
| |
| atl1_set_mac_addr(&adapter->hw); |
| return 0; |
| } |
| |
| static u32 atl1_check_link(struct atl1_adapter *adapter) |
| { |
| struct atl1_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| u32 ret_val; |
| u16 speed, duplex, phy_data; |
| int reconfig = 0; |
| |
| /* MII_BMSR must read twice */ |
| atl1_read_phy_reg(hw, MII_BMSR, &phy_data); |
| atl1_read_phy_reg(hw, MII_BMSR, &phy_data); |
| if (!(phy_data & BMSR_LSTATUS)) { /* link down */ |
| if (netif_carrier_ok(netdev)) { /* old link state: Up */ |
| dev_info(&adapter->pdev->dev, "link is down\n"); |
| adapter->link_speed = SPEED_0; |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| } |
| return ATL1_SUCCESS; |
| } |
| |
| /* Link Up */ |
| ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); |
| if (ret_val) |
| return ret_val; |
| |
| switch (hw->media_type) { |
| case MEDIA_TYPE_1000M_FULL: |
| if (speed != SPEED_1000 || duplex != FULL_DUPLEX) |
| reconfig = 1; |
| break; |
| case MEDIA_TYPE_100M_FULL: |
| if (speed != SPEED_100 || duplex != FULL_DUPLEX) |
| reconfig = 1; |
| break; |
| case MEDIA_TYPE_100M_HALF: |
| if (speed != SPEED_100 || duplex != HALF_DUPLEX) |
| reconfig = 1; |
| break; |
| case MEDIA_TYPE_10M_FULL: |
| if (speed != SPEED_10 || duplex != FULL_DUPLEX) |
| reconfig = 1; |
| break; |
| case MEDIA_TYPE_10M_HALF: |
| if (speed != SPEED_10 || duplex != HALF_DUPLEX) |
| reconfig = 1; |
| break; |
| } |
| |
| /* link result is our setting */ |
| if (!reconfig) { |
| if (adapter->link_speed != speed |
| || adapter->link_duplex != duplex) { |
| adapter->link_speed = speed; |
| adapter->link_duplex = duplex; |
| atl1_setup_mac_ctrl(adapter); |
| dev_info(&adapter->pdev->dev, |
| "%s link is up %d Mbps %s\n", |
| netdev->name, adapter->link_speed, |
| adapter->link_duplex == FULL_DUPLEX ? |
| "full duplex" : "half duplex"); |
| } |
| if (!netif_carrier_ok(netdev)) { /* Link down -> Up */ |
| netif_carrier_on(netdev); |
| netif_wake_queue(netdev); |
| } |
| return ATL1_SUCCESS; |
| } |
| |
| /* change orignal link status */ |
| if (netif_carrier_ok(netdev)) { |
| adapter->link_speed = SPEED_0; |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| } |
| |
| if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && |
| hw->media_type != MEDIA_TYPE_1000M_FULL) { |
| switch (hw->media_type) { |
| case MEDIA_TYPE_100M_FULL: |
| phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | |
| MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_100M_HALF: |
| phy_data = MII_CR_SPEED_100 | MII_CR_RESET; |
| break; |
| case MEDIA_TYPE_10M_FULL: |
| phy_data = |
| MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| default: /* MEDIA_TYPE_10M_HALF: */ |
| phy_data = MII_CR_SPEED_10 | MII_CR_RESET; |
| break; |
| } |
| atl1_write_phy_reg(hw, MII_BMCR, phy_data); |
| return ATL1_SUCCESS; |
| } |
| |
| /* auto-neg, insert timer to re-config phy */ |
| if (!adapter->phy_timer_pending) { |
| adapter->phy_timer_pending = true; |
| mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ); |
| } |
| |
| return ATL1_SUCCESS; |
| } |
| |
| static void atl1_check_for_link(struct atl1_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| u16 phy_data = 0; |
| |
| spin_lock(&adapter->lock); |
| adapter->phy_timer_pending = false; |
| atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); |
| atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); |
| spin_unlock(&adapter->lock); |
| |
| /* notify upper layer link down ASAP */ |
| if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */ |
| if (netif_carrier_ok(netdev)) { /* old link state: Up */ |
| dev_info(&adapter->pdev->dev, "%s link is down\n", |
| netdev->name); |
| adapter->link_speed = SPEED_0; |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| } |
| } |
| schedule_work(&adapter->link_chg_task); |
| } |
| |
| /* |
| * atl1_set_multi - Multicast and Promiscuous mode set |
| * @netdev: network interface device structure |
| * |
| * The set_multi entry point is called whenever the multicast address |
| * list or the network interface flags are updated. This routine is |
| * responsible for configuring the hardware for proper multicast, |
| * promiscuous mode, and all-multi behavior. |
| */ |
| static void atl1_set_multi(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| struct dev_mc_list *mc_ptr; |
| u32 rctl; |
| u32 hash_value; |
| |
| /* Check for Promiscuous and All Multicast modes */ |
| rctl = ioread32(hw->hw_addr + REG_MAC_CTRL); |
| if (netdev->flags & IFF_PROMISC) |
| rctl |= MAC_CTRL_PROMIS_EN; |
| else if (netdev->flags & IFF_ALLMULTI) { |
| rctl |= MAC_CTRL_MC_ALL_EN; |
| rctl &= ~MAC_CTRL_PROMIS_EN; |
| } else |
| rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); |
| |
| iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL); |
| |
| /* clear the old settings from the multicast hash table */ |
| iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); |
| iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); |
| |
| /* compute mc addresses' hash value ,and put it into hash table */ |
| for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { |
| hash_value = atl1_hash_mc_addr(hw, mc_ptr->dmi_addr); |
| atl1_hash_set(hw, hash_value); |
| } |
| } |
| |
| /* |
| * atl1_change_mtu - Change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int atl1_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| int old_mtu = netdev->mtu; |
| int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| |
| if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || |
| (max_frame > MAX_JUMBO_FRAME_SIZE)) { |
| dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); |
| return -EINVAL; |
| } |
| |
| adapter->hw.max_frame_size = max_frame; |
| adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; |
| adapter->rx_buffer_len = (max_frame + 7) & ~7; |
| adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; |
| |
| netdev->mtu = new_mtu; |
| if ((old_mtu != new_mtu) && netif_running(netdev)) { |
| atl1_down(adapter); |
| atl1_up(adapter); |
| } |
| |
| return 0; |
| } |
| |
| static void set_flow_ctrl_old(struct atl1_adapter *adapter) |
| { |
| u32 hi, lo, value; |
| |
| /* RFD Flow Control */ |
| value = adapter->rfd_ring.count; |
| hi = value / 16; |
| if (hi < 2) |
| hi = 2; |
| lo = value * 7 / 8; |
| |
| value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | |
| ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); |
| iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); |
| |
| /* RRD Flow Control */ |
| value = adapter->rrd_ring.count; |
| lo = value / 16; |
| hi = value * 7 / 8; |
| if (lo < 2) |
| lo = 2; |
| value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | |
| ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); |
| iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); |
| } |
| |
| static void set_flow_ctrl_new(struct atl1_hw *hw) |
| { |
| u32 hi, lo, value; |
| |
| /* RXF Flow Control */ |
| value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); |
| lo = value / 16; |
| if (lo < 192) |
| lo = 192; |
| hi = value * 7 / 8; |
| if (hi < lo) |
| hi = lo + 16; |
| value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | |
| ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); |
| |
| /* RRD Flow Control */ |
| value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); |
| lo = value / 8; |
| hi = value * 7 / 8; |
| if (lo < 2) |
| lo = 2; |
| if (hi < lo) |
| hi = lo + 3; |
| value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | |
| ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); |
| } |
| |
| /* |
| * atl1_configure - Configure Transmit&Receive Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Tx /Rx unit of the MAC after a reset. |
| */ |
| static u32 atl1_configure(struct atl1_adapter *adapter) |
| { |
| struct atl1_hw *hw = &adapter->hw; |
| u32 value; |
| |
| /* clear interrupt status */ |
| iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); |
| |
| /* set MAC Address */ |
| value = (((u32) hw->mac_addr[2]) << 24) | |
| (((u32) hw->mac_addr[3]) << 16) | |
| (((u32) hw->mac_addr[4]) << 8) | |
| (((u32) hw->mac_addr[5])); |
| iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); |
| value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); |
| iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); |
| |
| /* tx / rx ring */ |
| |
| /* HI base address */ |
| iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), |
| hw->hw_addr + REG_DESC_BASE_ADDR_HI); |
| /* LO base address */ |
| iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_RFD_ADDR_LO); |
| iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_RRD_ADDR_LO); |
| iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_TPD_ADDR_LO); |
| iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_CMB_ADDR_LO); |
| iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), |
| hw->hw_addr + REG_DESC_SMB_ADDR_LO); |
| |
| /* element count */ |
| value = adapter->rrd_ring.count; |
| value <<= 16; |
| value += adapter->rfd_ring.count; |
| iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); |
| iowrite32(adapter->tpd_ring.count, hw->hw_addr + |
| REG_DESC_TPD_RING_SIZE); |
| |
| /* Load Ptr */ |
| iowrite32(1, hw->hw_addr + REG_LOAD_PTR); |
| |
| /* config Mailbox */ |
| value = ((atomic_read(&adapter->tpd_ring.next_to_use) |
| & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | |
| ((atomic_read(&adapter->rrd_ring.next_to_clean) |
| & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | |
| ((atomic_read(&adapter->rfd_ring.next_to_use) |
| & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_MAILBOX); |
| |
| /* config IPG/IFG */ |
| value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) |
| << MAC_IPG_IFG_IPGT_SHIFT) | |
| (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) |
| << MAC_IPG_IFG_MIFG_SHIFT) | |
| (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) |
| << MAC_IPG_IFG_IPGR1_SHIFT) | |
| (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) |
| << MAC_IPG_IFG_IPGR2_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); |
| |
| /* config Half-Duplex Control */ |
| value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | |
| (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) |
| << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | |
| MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | |
| (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | |
| (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) |
| << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); |
| |
| /* set Interrupt Moderator Timer */ |
| iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); |
| iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); |
| |
| /* set Interrupt Clear Timer */ |
| iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); |
| |
| /* set max frame size hw will accept */ |
| iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); |
| |
| /* jumbo size & rrd retirement timer */ |
| value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) |
| << RXQ_JMBOSZ_TH_SHIFT) | |
| (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) |
| << RXQ_JMBO_LKAH_SHIFT) | |
| (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) |
| << RXQ_RRD_TIMER_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); |
| |
| /* Flow Control */ |
| switch (hw->dev_rev) { |
| case 0x8001: |
| case 0x9001: |
| case 0x9002: |
| case 0x9003: |
| set_flow_ctrl_old(adapter); |
| break; |
| default: |
| set_flow_ctrl_new(hw); |
| break; |
| } |
| |
| /* config TXQ */ |
| value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) |
| << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | |
| (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) |
| << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | |
| (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) |
| << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | |
| TXQ_CTRL_EN; |
| iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); |
| |
| /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ |
| value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) |
| << TX_JUMBO_TASK_TH_SHIFT) | |
| (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) |
| << TX_TPD_MIN_IPG_SHIFT); |
| iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); |
| |
| /* config RXQ */ |
| value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) |
| << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | |
| (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) |
| << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | |
| (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) |
| << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | |
| RXQ_CTRL_EN; |
| iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); |
| |
| /* config DMA Engine */ |
| value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) |
| << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | |
| ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) |
| << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | |
| DMA_CTRL_DMAW_EN; |
| value |= (u32) hw->dma_ord; |
| if (atl1_rcb_128 == hw->rcb_value) |
| value |= DMA_CTRL_RCB_VALUE; |
| iowrite32(value, hw->hw_addr + REG_DMA_CTRL); |
| |
| /* config CMB / SMB */ |
| value = (hw->cmb_tpd > adapter->tpd_ring.count) ? |
| hw->cmb_tpd : adapter->tpd_ring.count; |
| value <<= 16; |
| value |= hw->cmb_rrd; |
| iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); |
| value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); |
| iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); |
| iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); |
| |
| /* --- enable CMB / SMB */ |
| value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; |
| iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); |
| |
| value = ioread32(adapter->hw.hw_addr + REG_ISR); |
| if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) |
| value = 1; /* config failed */ |
| else |
| value = 0; |
| |
| /* clear all interrupt status */ |
| iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); |
| iowrite32(0, adapter->hw.hw_addr + REG_ISR); |
| return value; |
| } |
| |
| /* |
| * atl1_pcie_patch - Patch for PCIE module |
| */ |
| static void atl1_pcie_patch(struct atl1_adapter *adapter) |
| { |
| u32 value; |
| |
| /* much vendor magic here */ |
| value = 0x6500; |
| iowrite32(value, adapter->hw.hw_addr + 0x12FC); |
| /* pcie flow control mode change */ |
| value = ioread32(adapter->hw.hw_addr + 0x1008); |
| value |= 0x8000; |
| iowrite32(value, adapter->hw.hw_addr + 0x1008); |
| } |
| |
| /* |
| * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 |
| * on PCI Command register is disable. |
| * The function enable this bit. |
| * Brackett, 2006/03/15 |
| */ |
| static void atl1_via_workaround(struct atl1_adapter *adapter) |
| { |
| unsigned long value; |
| |
| value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); |
| if (value & PCI_COMMAND_INTX_DISABLE) |
| value &= ~PCI_COMMAND_INTX_DISABLE; |
| iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); |
| } |
| |
| /* |
| * atl1_irq_enable - Enable default interrupt generation settings |
| * @adapter: board private structure |
| */ |
| static void atl1_irq_enable(struct atl1_adapter *adapter) |
| { |
| iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR); |
| ioread32(adapter->hw.hw_addr + REG_IMR); |
| } |
| |
| /* |
| * atl1_irq_disable - Mask off interrupt generation on the NIC |
| * @adapter: board private structure |
| */ |
| static void atl1_irq_disable(struct atl1_adapter *adapter) |
| { |
| iowrite32(0, adapter->hw.hw_addr + REG_IMR); |
| ioread32(adapter->hw.hw_addr + REG_IMR); |
| synchronize_irq(adapter->pdev->irq); |
| } |
| |
| static void atl1_clear_phy_int(struct atl1_adapter *adapter) |
| { |
| u16 phy_data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| atl1_read_phy_reg(&adapter->hw, 19, &phy_data); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| } |
| |
| static void atl1_inc_smb(struct atl1_adapter *adapter) |
| { |
| struct stats_msg_block *smb = adapter->smb.smb; |
| |
| /* Fill out the OS statistics structure */ |
| adapter->soft_stats.rx_packets += smb->rx_ok; |
| adapter->soft_stats.tx_packets += smb->tx_ok; |
| adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; |
| adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; |
| adapter->soft_stats.multicast += smb->rx_mcast; |
| adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + |
| smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); |
| |
| /* Rx Errors */ |
| adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + |
| smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + |
| smb->rx_rrd_ov + smb->rx_align_err); |
| adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; |
| adapter->soft_stats.rx_length_errors += smb->rx_len_err; |
| adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; |
| adapter->soft_stats.rx_frame_errors += smb->rx_align_err; |
| adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + |
| smb->rx_rxf_ov); |
| |
| adapter->soft_stats.rx_pause += smb->rx_pause; |
| adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; |
| adapter->soft_stats.rx_trunc += smb->rx_sz_ov; |
| |
| /* Tx Errors */ |
| adapter->soft_stats.tx_errors += (smb->tx_late_col + |
| smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); |
| adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; |
| adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; |
| adapter->soft_stats.tx_window_errors += smb->tx_late_col; |
| |
| adapter->soft_stats.excecol += smb->tx_abort_col; |
| adapter->soft_stats.deffer += smb->tx_defer; |
| adapter->soft_stats.scc += smb->tx_1_col; |
| adapter->soft_stats.mcc += smb->tx_2_col; |
| adapter->soft_stats.latecol += smb->tx_late_col; |
| adapter->soft_stats.tx_underun += smb->tx_underrun; |
| adapter->soft_stats.tx_trunc += smb->tx_trunc; |
| adapter->soft_stats.tx_pause += smb->tx_pause; |
| |
| adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets; |
| adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets; |
| adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes; |
| adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes; |
| adapter->net_stats.multicast = adapter->soft_stats.multicast; |
| adapter->net_stats.collisions = adapter->soft_stats.collisions; |
| adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors; |
| adapter->net_stats.rx_over_errors = |
| adapter->soft_stats.rx_missed_errors; |
| adapter->net_stats.rx_length_errors = |
| adapter->soft_stats.rx_length_errors; |
| adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; |
| adapter->net_stats.rx_frame_errors = |
| adapter->soft_stats.rx_frame_errors; |
| adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; |
| adapter->net_stats.rx_missed_errors = |
| adapter->soft_stats.rx_missed_errors; |
| adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors; |
| adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; |
| adapter->net_stats.tx_aborted_errors = |
| adapter->soft_stats.tx_aborted_errors; |
| adapter->net_stats.tx_window_errors = |
| adapter->soft_stats.tx_window_errors; |
| adapter->net_stats.tx_carrier_errors = |
| adapter->soft_stats.tx_carrier_errors; |
| } |
| |
| /* |
| * atl1_get_stats - Get System Network Statistics |
| * @netdev: network interface device structure |
| * |
| * Returns the address of the device statistics structure. |
| * The statistics are actually updated from the timer callback. |
| */ |
| static struct net_device_stats *atl1_get_stats(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| return &adapter->net_stats; |
| } |
| |
| static void atl1_update_mailbox(struct atl1_adapter *adapter) |
| { |
| unsigned long flags; |
| u32 tpd_next_to_use; |
| u32 rfd_next_to_use; |
| u32 rrd_next_to_clean; |
| u32 value; |
| |
| spin_lock_irqsave(&adapter->mb_lock, flags); |
| |
| tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); |
| rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); |
| rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); |
| |
| value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << |
| MB_RFD_PROD_INDX_SHIFT) | |
| ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << |
| MB_RRD_CONS_INDX_SHIFT) | |
| ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << |
| MB_TPD_PROD_INDX_SHIFT); |
| iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); |
| |
| spin_unlock_irqrestore(&adapter->mb_lock, flags); |
| } |
| |
| static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, |
| struct rx_return_desc *rrd, u16 offset) |
| { |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| |
| while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { |
| rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; |
| if (++rfd_ring->next_to_clean == rfd_ring->count) { |
| rfd_ring->next_to_clean = 0; |
| } |
| } |
| } |
| |
| static void atl1_update_rfd_index(struct atl1_adapter *adapter, |
| struct rx_return_desc *rrd) |
| { |
| u16 num_buf; |
| |
| num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / |
| adapter->rx_buffer_len; |
| if (rrd->num_buf == num_buf) |
| /* clean alloc flag for bad rrd */ |
| atl1_clean_alloc_flag(adapter, rrd, num_buf); |
| } |
| |
| static void atl1_rx_checksum(struct atl1_adapter *adapter, |
| struct rx_return_desc *rrd, struct sk_buff *skb) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { |
| if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | |
| ERR_FLAG_CODE | ERR_FLAG_OV)) { |
| adapter->hw_csum_err++; |
| dev_printk(KERN_DEBUG, &pdev->dev, |
| "rx checksum error\n"); |
| return; |
| } |
| } |
| |
| /* not IPv4 */ |
| if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) |
| /* checksum is invalid, but it's not an IPv4 pkt, so ok */ |
| return; |
| |
| /* IPv4 packet */ |
| if (likely(!(rrd->err_flg & |
| (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| adapter->hw_csum_good++; |
| return; |
| } |
| |
| /* IPv4, but hardware thinks its checksum is wrong */ |
| dev_printk(KERN_DEBUG, &pdev->dev, |
| "hw csum wrong, pkt_flag:%x, err_flag:%x\n", |
| rrd->pkt_flg, rrd->err_flg); |
| skb->ip_summed = CHECKSUM_COMPLETE; |
| skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); |
| adapter->hw_csum_err++; |
| return; |
| } |
| |
| /* |
| * atl1_alloc_rx_buffers - Replace used receive buffers |
| * @adapter: address of board private structure |
| */ |
| static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) |
| { |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct pci_dev *pdev = adapter->pdev; |
| struct page *page; |
| unsigned long offset; |
| struct atl1_buffer *buffer_info, *next_info; |
| struct sk_buff *skb; |
| u16 num_alloc = 0; |
| u16 rfd_next_to_use, next_next; |
| struct rx_free_desc *rfd_desc; |
| |
| next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); |
| if (++next_next == rfd_ring->count) |
| next_next = 0; |
| buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; |
| next_info = &rfd_ring->buffer_info[next_next]; |
| |
| while (!buffer_info->alloced && !next_info->alloced) { |
| if (buffer_info->skb) { |
| buffer_info->alloced = 1; |
| goto next; |
| } |
| |
| rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); |
| |
| skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); |
| if (unlikely(!skb)) { /* Better luck next round */ |
| adapter->net_stats.rx_dropped++; |
| break; |
| } |
| |
| /* |
| * Make buffer alignment 2 beyond a 16 byte boundary |
| * this will result in a 16 byte aligned IP header after |
| * the 14 byte MAC header is removed |
| */ |
| skb_reserve(skb, NET_IP_ALIGN); |
| |
| buffer_info->alloced = 1; |
| buffer_info->skb = skb; |
| buffer_info->length = (u16) adapter->rx_buffer_len; |
| page = virt_to_page(skb->data); |
| offset = (unsigned long)skb->data & ~PAGE_MASK; |
| buffer_info->dma = pci_map_page(pdev, page, offset, |
| adapter->rx_buffer_len, |
| PCI_DMA_FROMDEVICE); |
| rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); |
| rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); |
| rfd_desc->coalese = 0; |
| |
| next: |
| rfd_next_to_use = next_next; |
| if (unlikely(++next_next == rfd_ring->count)) |
| next_next = 0; |
| |
| buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; |
| next_info = &rfd_ring->buffer_info[next_next]; |
| num_alloc++; |
| } |
| |
| if (num_alloc) { |
| /* |
| * Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); |
| } |
| return num_alloc; |
| } |
| |
| static void atl1_intr_rx(struct atl1_adapter *adapter) |
| { |
| int i, count; |
| u16 length; |
| u16 rrd_next_to_clean; |
| u32 value; |
| struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; |
| struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; |
| struct atl1_buffer *buffer_info; |
| struct rx_return_desc *rrd; |
| struct sk_buff *skb; |
| |
| count = 0; |
| |
| rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); |
| |
| while (1) { |
| rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); |
| i = 1; |
| if (likely(rrd->xsz.valid)) { /* packet valid */ |
| chk_rrd: |
| /* check rrd status */ |
| if (likely(rrd->num_buf == 1)) |
| goto rrd_ok; |
| |
| /* rrd seems to be bad */ |
| if (unlikely(i-- > 0)) { |
| /* rrd may not be DMAed completely */ |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "incomplete RRD DMA transfer\n"); |
| udelay(1); |
| goto chk_rrd; |
| } |
| /* bad rrd */ |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "bad RRD\n"); |
| /* see if update RFD index */ |
| if (rrd->num_buf > 1) |
| atl1_update_rfd_index(adapter, rrd); |
| |
| /* update rrd */ |
| rrd->xsz.valid = 0; |
| if (++rrd_next_to_clean == rrd_ring->count) |
| rrd_next_to_clean = 0; |
| count++; |
| continue; |
| } else { /* current rrd still not be updated */ |
| |
| break; |
| } |
| rrd_ok: |
| /* clean alloc flag for bad rrd */ |
| atl1_clean_alloc_flag(adapter, rrd, 0); |
| |
| buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; |
| if (++rfd_ring->next_to_clean == rfd_ring->count) |
| rfd_ring->next_to_clean = 0; |
| |
| /* update rrd next to clean */ |
| if (++rrd_next_to_clean == rrd_ring->count) |
| rrd_next_to_clean = 0; |
| count++; |
| |
| if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { |
| if (!(rrd->err_flg & |
| (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM |
| | ERR_FLAG_LEN))) { |
| /* packet error, don't need upstream */ |
| buffer_info->alloced = 0; |
| rrd->xsz.valid = 0; |
| continue; |
| } |
| } |
| |
| /* Good Receive */ |
| pci_unmap_page(adapter->pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_FROMDEVICE); |
| skb = buffer_info->skb; |
| length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); |
| |
| skb_put(skb, length - ETH_FCS_LEN); |
| |
| /* Receive Checksum Offload */ |
| atl1_rx_checksum(adapter, rrd, skb); |
| skb->protocol = eth_type_trans(skb, adapter->netdev); |
| |
| if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) { |
| u16 vlan_tag = (rrd->vlan_tag >> 4) | |
| ((rrd->vlan_tag & 7) << 13) | |
| ((rrd->vlan_tag & 8) << 9); |
| vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag); |
| } else |
| netif_rx(skb); |
| |
| /* let protocol layer free skb */ |
| buffer_info->skb = NULL; |
| buffer_info->alloced = 0; |
| rrd->xsz.valid = 0; |
| |
| adapter->netdev->last_rx = jiffies; |
| } |
| |
| atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); |
| |
| atl1_alloc_rx_buffers(adapter); |
| |
| /* update mailbox ? */ |
| if (count) { |
| u32 tpd_next_to_use; |
| u32 rfd_next_to_use; |
| |
| spin_lock(&adapter->mb_lock); |
| |
| tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); |
| rfd_next_to_use = |
| atomic_read(&adapter->rfd_ring.next_to_use); |
| rrd_next_to_clean = |
| atomic_read(&adapter->rrd_ring.next_to_clean); |
| value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << |
| MB_RFD_PROD_INDX_SHIFT) | |
| ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << |
| MB_RRD_CONS_INDX_SHIFT) | |
| ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << |
| MB_TPD_PROD_INDX_SHIFT); |
| iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); |
| spin_unlock(&adapter->mb_lock); |
| } |
| } |
| |
| static void atl1_intr_tx(struct atl1_adapter *adapter) |
| { |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_buffer *buffer_info; |
| u16 sw_tpd_next_to_clean; |
| u16 cmb_tpd_next_to_clean; |
| |
| sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); |
| cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); |
| |
| while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { |
| struct tx_packet_desc *tpd; |
| |
| tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean); |
| buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; |
| if (buffer_info->dma) { |
| pci_unmap_page(adapter->pdev, buffer_info->dma, |
| buffer_info->length, PCI_DMA_TODEVICE); |
| buffer_info->dma = 0; |
| } |
| |
| if (buffer_info->skb) { |
| dev_kfree_skb_irq(buffer_info->skb); |
| buffer_info->skb = NULL; |
| } |
| tpd->buffer_addr = 0; |
| tpd->desc.data = 0; |
| |
| if (++sw_tpd_next_to_clean == tpd_ring->count) |
| sw_tpd_next_to_clean = 0; |
| } |
| atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); |
| |
| if (netif_queue_stopped(adapter->netdev) |
| && netif_carrier_ok(adapter->netdev)) |
| netif_wake_queue(adapter->netdev); |
| } |
| |
| static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) |
| { |
| u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); |
| u16 next_to_use = atomic_read(&tpd_ring->next_to_use); |
| return ((next_to_clean > next_to_use) ? |
| next_to_clean - next_to_use - 1 : |
| tpd_ring->count + next_to_clean - next_to_use - 1); |
| } |
| |
| static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, |
| struct tso_param *tso) |
| { |
| /* We enter this function holding a spinlock. */ |
| u8 ipofst; |
| int err; |
| |
| if (skb_shinfo(skb)->gso_size) { |
| if (skb_header_cloned(skb)) { |
| err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); |
| if (unlikely(err)) |
| return err; |
| } |
| |
| if (skb->protocol == ntohs(ETH_P_IP)) { |
| struct iphdr *iph = ip_hdr(skb); |
| |
| iph->tot_len = 0; |
| iph->check = 0; |
| tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, |
| iph->daddr, 0, IPPROTO_TCP, 0); |
| ipofst = skb_network_offset(skb); |
| if (ipofst != ETH_HLEN) /* 802.3 frame */ |
| tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT; |
| |
| tso->tsopl |= (iph->ihl & |
| CSUM_PARAM_IPHL_MASK) << CSUM_PARAM_IPHL_SHIFT; |
| tso->tsopl |= (tcp_hdrlen(skb) & |
| TSO_PARAM_TCPHDRLEN_MASK) << |
| TSO_PARAM_TCPHDRLEN_SHIFT; |
| tso->tsopl |= (skb_shinfo(skb)->gso_size & |
| TSO_PARAM_MSS_MASK) << TSO_PARAM_MSS_SHIFT; |
| tso->tsopl |= 1 << TSO_PARAM_IPCKSUM_SHIFT; |
| tso->tsopl |= 1 << TSO_PARAM_TCPCKSUM_SHIFT; |
| tso->tsopl |= 1 << TSO_PARAM_SEGMENT_SHIFT; |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, |
| struct csum_param *csum) |
| { |
| u8 css, cso; |
| |
| if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { |
| cso = skb_transport_offset(skb); |
| css = cso + skb->csum_offset; |
| if (unlikely(cso & 0x1)) { |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "payload offset not an even number\n"); |
| return -1; |
| } |
| csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) << |
| CSUM_PARAM_PLOADOFFSET_SHIFT; |
| csum->csumpl |= (css & CSUM_PARAM_XSUMOFFSET_MASK) << |
| CSUM_PARAM_XSUMOFFSET_SHIFT; |
| csum->csumpl |= 1 << CSUM_PARAM_CUSTOMCKSUM_SHIFT; |
| return true; |
| } |
| |
| return true; |
| } |
| |
| static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, |
| bool tcp_seg) |
| { |
| /* We enter this function holding a spinlock. */ |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| struct atl1_buffer *buffer_info; |
| struct page *page; |
| int first_buf_len = skb->len; |
| unsigned long offset; |
| unsigned int nr_frags; |
| unsigned int f; |
| u16 tpd_next_to_use; |
| u16 proto_hdr_len; |
| u16 len12; |
| |
| first_buf_len -= skb->data_len; |
| nr_frags = skb_shinfo(skb)->nr_frags; |
| tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); |
| buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; |
| if (unlikely(buffer_info->skb)) |
| BUG(); |
| buffer_info->skb = NULL; /* put skb in last TPD */ |
| |
| if (tcp_seg) { |
| /* TSO/GSO */ |
| proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
| buffer_info->length = proto_hdr_len; |
| page = virt_to_page(skb->data); |
| offset = (unsigned long)skb->data & ~PAGE_MASK; |
| buffer_info->dma = pci_map_page(adapter->pdev, page, |
| offset, proto_hdr_len, |
| PCI_DMA_TODEVICE); |
| |
| if (++tpd_next_to_use == tpd_ring->count) |
| tpd_next_to_use = 0; |
| |
| if (first_buf_len > proto_hdr_len) { |
| int i, m; |
| |
| len12 = first_buf_len - proto_hdr_len; |
| m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) / |
| ATL1_MAX_TX_BUF_LEN; |
| for (i = 0; i < m; i++) { |
| buffer_info = |
| &tpd_ring->buffer_info[tpd_next_to_use]; |
| buffer_info->skb = NULL; |
| buffer_info->length = |
| (ATL1_MAX_TX_BUF_LEN >= |
| len12) ? ATL1_MAX_TX_BUF_LEN : len12; |
| len12 -= buffer_info->length; |
| page = virt_to_page(skb->data + |
| (proto_hdr_len + |
| i * ATL1_MAX_TX_BUF_LEN)); |
| offset = (unsigned long)(skb->data + |
| (proto_hdr_len + |
| i * ATL1_MAX_TX_BUF_LEN)) & ~PAGE_MASK; |
| buffer_info->dma = pci_map_page(adapter->pdev, |
| page, offset, buffer_info->length, |
| PCI_DMA_TODEVICE); |
| if (++tpd_next_to_use == tpd_ring->count) |
| tpd_next_to_use = 0; |
| } |
| } |
| } else { |
| /* not TSO/GSO */ |
| buffer_info->length = first_buf_len; |
| page = virt_to_page(skb->data); |
| offset = (unsigned long)skb->data & ~PAGE_MASK; |
| buffer_info->dma = pci_map_page(adapter->pdev, page, |
| offset, first_buf_len, PCI_DMA_TODEVICE); |
| if (++tpd_next_to_use == tpd_ring->count) |
| tpd_next_to_use = 0; |
| } |
| |
| for (f = 0; f < nr_frags; f++) { |
| struct skb_frag_struct *frag; |
| u16 lenf, i, m; |
| |
| frag = &skb_shinfo(skb)->frags[f]; |
| lenf = frag->size; |
| |
| m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN; |
| for (i = 0; i < m; i++) { |
| buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; |
| if (unlikely(buffer_info->skb)) |
| BUG(); |
| buffer_info->skb = NULL; |
| buffer_info->length = (lenf > ATL1_MAX_TX_BUF_LEN) ? |
| ATL1_MAX_TX_BUF_LEN : lenf; |
| lenf -= buffer_info->length; |
| buffer_info->dma = pci_map_page(adapter->pdev, |
| frag->page, |
| frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), |
| buffer_info->length, PCI_DMA_TODEVICE); |
| |
| if (++tpd_next_to_use == tpd_ring->count) |
| tpd_next_to_use = 0; |
| } |
| } |
| |
| /* last tpd's buffer-info */ |
| buffer_info->skb = skb; |
| } |
| |
| static void atl1_tx_queue(struct atl1_adapter *adapter, int count, |
| union tpd_descr *descr) |
| { |
| /* We enter this function holding a spinlock. */ |
| struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; |
| int j; |
| u32 val; |
| struct atl1_buffer *buffer_info; |
| struct tx_packet_desc *tpd; |
| u16 tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); |
| |
| for (j = 0; j < count; j++) { |
| buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; |
| tpd = ATL1_TPD_DESC(&adapter->tpd_ring, tpd_next_to_use); |
| tpd->desc.csum.csumpu = descr->csum.csumpu; |
| tpd->desc.csum.csumpl = descr->csum.csumpl; |
| tpd->desc.tso.tsopu = descr->tso.tsopu; |
| tpd->desc.tso.tsopl = descr->tso.tsopl; |
| tpd->buffer_addr = cpu_to_le64(buffer_info->dma); |
| tpd->desc.data = descr->data; |
| tpd->desc.csum.csumpu |= (cpu_to_le16(buffer_info->length) & |
| CSUM_PARAM_BUFLEN_MASK) << CSUM_PARAM_BUFLEN_SHIFT; |
| |
| val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & |
| TSO_PARAM_SEGMENT_MASK; |
| if (val && !j) |
| tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT; |
| |
| if (j == (count - 1)) |
| tpd->desc.csum.csumpl |= 1 << CSUM_PARAM_EOP_SHIFT; |
| |
| if (++tpd_next_to_use == tpd_ring->count) |
| tpd_next_to_use = 0; |
| } |
| /* |
| * Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| |
| atomic_set(&tpd_ring->next_to_use, (int)tpd_next_to_use); |
| } |
| |
| static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| int len = skb->len; |
| int tso; |
| int count = 1; |
| int ret_val; |
| u32 val; |
| union tpd_descr param; |
| u16 frag_size; |
| u16 vlan_tag; |
| unsigned long flags; |
| unsigned int nr_frags = 0; |
| unsigned int mss = 0; |
| unsigned int f; |
| unsigned int proto_hdr_len; |
| |
| len -= skb->data_len; |
| |
| if (unlikely(skb->len == 0)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| param.data = 0; |
| param.tso.tsopu = 0; |
| param.tso.tsopl = 0; |
| param.csum.csumpu = 0; |
| param.csum.csumpl = 0; |
| |
| /* nr_frags will be nonzero if we're doing scatter/gather (SG) */ |
| nr_frags = skb_shinfo(skb)->nr_frags; |
| for (f = 0; f < nr_frags; f++) { |
| frag_size = skb_shinfo(skb)->frags[f].size; |
| if (frag_size) |
| count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / |
| ATL1_MAX_TX_BUF_LEN; |
| } |
| |
| /* mss will be nonzero if we're doing segment offload (TSO/GSO) */ |
| mss = skb_shinfo(skb)->gso_size; |
| if (mss) { |
| if (skb->protocol == htons(ETH_P_IP)) { |
| proto_hdr_len = (skb_transport_offset(skb) + |
| tcp_hdrlen(skb)); |
| if (unlikely(proto_hdr_len > len)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| /* need additional TPD ? */ |
| if (proto_hdr_len != len) |
| count += (len - proto_hdr_len + |
| ATL1_MAX_TX_BUF_LEN - 1) / |
| ATL1_MAX_TX_BUF_LEN; |
| } |
| } |
| |
| if (!spin_trylock_irqsave(&adapter->lock, flags)) { |
| /* Can't get lock - tell upper layer to requeue */ |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx locked\n"); |
| return NETDEV_TX_LOCKED; |
| } |
| |
| if (atl1_tpd_avail(&adapter->tpd_ring) < count) { |
| /* not enough descriptors */ |
| netif_stop_queue(netdev); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx busy\n"); |
| return NETDEV_TX_BUSY; |
| } |
| |
| param.data = 0; |
| |
| if (adapter->vlgrp && vlan_tx_tag_present(skb)) { |
| vlan_tag = vlan_tx_tag_get(skb); |
| vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | |
| ((vlan_tag >> 9) & 0x8); |
| param.csum.csumpl |= 1 << CSUM_PARAM_INSVLAG_SHIFT; |
| param.csum.csumpu |= (vlan_tag & CSUM_PARAM_VALANTAG_MASK) << |
| CSUM_PARAM_VALAN_SHIFT; |
| } |
| |
| tso = atl1_tso(adapter, skb, ¶m.tso); |
| if (tso < 0) { |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| if (!tso) { |
| ret_val = atl1_tx_csum(adapter, skb, ¶m.csum); |
| if (ret_val < 0) { |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| } |
| |
| val = (param.csum.csumpl >> CSUM_PARAM_SEGMENT_SHIFT) & |
| CSUM_PARAM_SEGMENT_MASK; |
| atl1_tx_map(adapter, skb, 1 == val); |
| atl1_tx_queue(adapter, count, ¶m); |
| netdev->trans_start = jiffies; |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| atl1_update_mailbox(adapter); |
| return NETDEV_TX_OK; |
| } |
| |
| /* |
| * atl1_intr - Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| * @pt_regs: CPU registers structure |
| */ |
| static irqreturn_t atl1_intr(int irq, void *data) |
| { |
| struct atl1_adapter *adapter = netdev_priv(data); |
| u32 status; |
| u8 update_rx; |
| int max_ints = 10; |
| |
| status = adapter->cmb.cmb->int_stats; |
| if (!status) |
| return IRQ_NONE; |
| |
| update_rx = 0; |
| |
| do { |
| /* clear CMB interrupt status at once */ |
| adapter->cmb.cmb->int_stats = 0; |
| |
| if (status & ISR_GPHY) /* clear phy status */ |
| atl1_clear_phy_int(adapter); |
| |
| /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ |
| iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); |
| |
| /* check if SMB intr */ |
| if (status & ISR_SMB) |
| atl1_inc_smb(adapter); |
| |
| /* check if PCIE PHY Link down */ |
| if (status & ISR_PHY_LINKDOWN) { |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "pcie phy link down %x\n", status); |
| if (netif_running(adapter->netdev)) { /* reset MAC */ |
| iowrite32(0, adapter->hw.hw_addr + REG_IMR); |
| schedule_work(&adapter->pcie_dma_to_rst_task); |
| return IRQ_HANDLED; |
| } |
| } |
| |
| /* check if DMA read/write error ? */ |
| if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "pcie DMA r/w error (status = 0x%x)\n", |
| status); |
| iowrite32(0, adapter->hw.hw_addr + REG_IMR); |
| schedule_work(&adapter->pcie_dma_to_rst_task); |
| return IRQ_HANDLED; |
| } |
| |
| /* link event */ |
| if (status & ISR_GPHY) { |
| adapter->soft_stats.tx_carrier_errors++; |
| atl1_check_for_link(adapter); |
| } |
| |
| /* transmit event */ |
| if (status & ISR_CMB_TX) |
| atl1_intr_tx(adapter); |
| |
| /* rx exception */ |
| if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | |
| ISR_RRD_OV | ISR_HOST_RFD_UNRUN | |
| ISR_HOST_RRD_OV | ISR_CMB_RX))) { |
| if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | |
| ISR_RRD_OV | ISR_HOST_RFD_UNRUN | |
| ISR_HOST_RRD_OV)) |
| dev_printk(KERN_DEBUG, &adapter->pdev->dev, |
| "rx exception, ISR = 0x%x\n", status); |
| atl1_intr_rx(adapter); |
| } |
| |
| if (--max_ints < 0) |
| break; |
| |
| } while ((status = adapter->cmb.cmb->int_stats)); |
| |
| /* re-enable Interrupt */ |
| iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * atl1_watchdog - Timer Call-back |
| * @data: pointer to netdev cast into an unsigned long |
| */ |
| static void atl1_watchdog(unsigned long data) |
| { |
| struct atl1_adapter *adapter = (struct atl1_adapter *)data; |
| |
| /* Reset the timer */ |
| mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); |
| } |
| |
| /* |
| * atl1_phy_config - Timer Call-back |
| * @data: pointer to netdev cast into an unsigned long |
| */ |
| static void atl1_phy_config(unsigned long data) |
| { |
| struct atl1_adapter *adapter = (struct atl1_adapter *)data; |
| struct atl1_hw *hw = &adapter->hw; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| adapter->phy_timer_pending = false; |
| atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); |
| atl1_write_phy_reg(hw, MII_AT001_CR, hw->mii_1000t_ctrl_reg); |
| atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| } |
| |
| /* |
| * atl1_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| */ |
| static void atl1_tx_timeout(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| /* Do the reset outside of interrupt context */ |
| schedule_work(&adapter->tx_timeout_task); |
| } |
| |
| /* |
| * Orphaned vendor comment left intact here: |
| * <vendor comment> |
| * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT |
| * will assert. We do soft reset <0x1400=1> according |
| * with the SPEC. BUT, it seemes that PCIE or DMA |
| * state-machine will not be reset. DMAR_TO_INT will |
| * assert again and again. |
| * </vendor comment> |
| */ |
| static void atl1_tx_timeout_task(struct work_struct *work) |
| { |
| struct atl1_adapter *adapter = |
| container_of(work, struct atl1_adapter, tx_timeout_task); |
| struct net_device *netdev = adapter->netdev; |
| |
| netif_device_detach(netdev); |
| atl1_down(adapter); |
| atl1_up(adapter); |
| netif_device_attach(netdev); |
| } |
| |
| /* |
| * atl1_link_chg_task - deal with link change event Out of interrupt context |
| */ |
| static void atl1_link_chg_task(struct work_struct *work) |
| { |
| struct atl1_adapter *adapter = |
| container_of(work, struct atl1_adapter, link_chg_task); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| atl1_check_link(adapter); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| } |
| |
| static void atl1_vlan_rx_register(struct net_device *netdev, |
| struct vlan_group *grp) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| unsigned long flags; |
| u32 ctrl; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| /* atl1_irq_disable(adapter); */ |
| adapter->vlgrp = grp; |
| |
| if (grp) { |
| /* enable VLAN tag insert/strip */ |
| ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); |
| ctrl |= MAC_CTRL_RMV_VLAN; |
| iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); |
| } else { |
| /* disable VLAN tag insert/strip */ |
| ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); |
| ctrl &= ~MAC_CTRL_RMV_VLAN; |
| iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); |
| } |
| |
| /* atl1_irq_enable(adapter); */ |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| } |
| |
| static void atl1_restore_vlan(struct atl1_adapter *adapter) |
| { |
| atl1_vlan_rx_register(adapter->netdev, adapter->vlgrp); |
| } |
| |
| int atl1_reset(struct atl1_adapter *adapter) |
| { |
| int ret; |
| |
| ret = atl1_reset_hw(&adapter->hw); |
| if (ret != ATL1_SUCCESS) |
| return ret; |
| return atl1_init_hw(&adapter->hw); |
| } |
| |
| s32 atl1_up(struct atl1_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int err; |
| int irq_flags = IRQF_SAMPLE_RANDOM; |
| |
| /* hardware has been reset, we need to reload some things */ |
| atl1_set_multi(netdev); |
| atl1_init_ring_ptrs(adapter); |
| atl1_restore_vlan(adapter); |
| err = atl1_alloc_rx_buffers(adapter); |
| if (unlikely(!err)) /* no RX BUFFER allocated */ |
| return -ENOMEM; |
| |
| if (unlikely(atl1_configure(adapter))) { |
| err = -EIO; |
| goto err_up; |
| } |
| |
| err = pci_enable_msi(adapter->pdev); |
| if (err) { |
| dev_info(&adapter->pdev->dev, |
| "Unable to enable MSI: %d\n", err); |
| irq_flags |= IRQF_SHARED; |
| } |
| |
| err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags, |
| netdev->name, netdev); |
| if (unlikely(err)) |
| goto err_up; |
| |
| mod_timer(&adapter->watchdog_timer, jiffies); |
| atl1_irq_enable(adapter); |
| atl1_check_link(adapter); |
| return 0; |
| |
| err_up: |
| pci_disable_msi(adapter->pdev); |
| /* free rx_buffers */ |
| atl1_clean_rx_ring(adapter); |
| return err; |
| } |
| |
| void atl1_down(struct atl1_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| del_timer_sync(&adapter->watchdog_timer); |
| del_timer_sync(&adapter->phy_config_timer); |
| adapter->phy_timer_pending = false; |
| |
| atl1_irq_disable(adapter); |
| free_irq(adapter->pdev->irq, netdev); |
| pci_disable_msi(adapter->pdev); |
| atl1_reset_hw(&adapter->hw); |
| adapter->cmb.cmb->int_stats = 0; |
| |
| adapter->link_speed = SPEED_0; |
| adapter->link_duplex = -1; |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| |
| atl1_clean_tx_ring(adapter); |
| atl1_clean_rx_ring(adapter); |
| } |
| |
| /* |
| * atl1_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| */ |
| static int atl1_open(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| int err; |
| |
| /* allocate transmit descriptors */ |
| err = atl1_setup_ring_resources(adapter); |
| if (err) |
| return err; |
| |
| err = atl1_up(adapter); |
| if (err) |
| goto err_up; |
| |
| return 0; |
| |
| err_up: |
| atl1_reset(adapter); |
| return err; |
| } |
| |
| /* |
| * atl1_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the drivers control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| */ |
| static int atl1_close(struct net_device *netdev) |
| { |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| atl1_down(adapter); |
| atl1_free_ring_resources(adapter); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int atl1_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| struct atl1_hw *hw = &adapter->hw; |
| u32 ctrl = 0; |
| u32 wufc = adapter->wol; |
| |
| netif_device_detach(netdev); |
| if (netif_running(netdev)) |
| atl1_down(adapter); |
| |
| atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); |
| atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); |
| if (ctrl & BMSR_LSTATUS) |
| wufc &= ~ATL1_WUFC_LNKC; |
| |
| /* reduce speed to 10/100M */ |
| if (wufc) { |
| atl1_phy_enter_power_saving(hw); |
| /* if resume, let driver to re- setup link */ |
| hw->phy_configured = false; |
| atl1_set_mac_addr(hw); |
| atl1_set_multi(netdev); |
| |
| ctrl = 0; |
| /* turn on magic packet wol */ |
| if (wufc & ATL1_WUFC_MAG) |
| ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; |
| |
| /* turn on Link change WOL */ |
| if (wufc & ATL1_WUFC_LNKC) |
| ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); |
| iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); |
| |
| /* turn on all-multi mode if wake on multicast is enabled */ |
| ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL); |
| ctrl &= ~MAC_CTRL_DBG; |
| ctrl &= ~MAC_CTRL_PROMIS_EN; |
| if (wufc & ATL1_WUFC_MC) |
| ctrl |= MAC_CTRL_MC_ALL_EN; |
| else |
| ctrl &= ~MAC_CTRL_MC_ALL_EN; |
| |
| /* turn on broadcast mode if wake on-BC is enabled */ |
| if (wufc & ATL1_WUFC_BC) |
| ctrl |= MAC_CTRL_BC_EN; |
| else |
| ctrl &= ~MAC_CTRL_BC_EN; |
| |
| /* enable RX */ |
| ctrl |= MAC_CTRL_RX_EN; |
| iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); |
| pci_enable_wake(pdev, PCI_D3hot, 1); |
| pci_enable_wake(pdev, PCI_D3cold, 1); |
| } else { |
| iowrite32(0, hw->hw_addr + REG_WOL_CTRL); |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| } |
| |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| |
| pci_set_power_state(pdev, PCI_D3hot); |
| |
| return 0; |
| } |
| |
| static int atl1_resume(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1_adapter *adapter = netdev_priv(netdev); |
| u32 ret_val; |
| |
| pci_set_power_state(pdev, 0); |
| pci_restore_state(pdev); |
| |
| ret_val = pci_enable_device(pdev); |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| |
| iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); |
| atl1_reset(adapter); |
| |
| if (netif_running(netdev)) |
| atl1_up(adapter); |
| netif_device_attach(netdev); |
| |
| atl1_via_workaround(adapter); |
| |
| return 0; |
| } |
| #else |
| #define atl1_suspend NULL |
| #define atl1_resume NULL |
| #endif |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void atl1_poll_controller(struct net_device *netdev) |
| { |
| disable_irq(netdev->irq); |
| atl1_intr(netdev->irq, netdev); |
| enable_irq(netdev->irq); |
| } |
| #endif |
| |
| /* |
| * atl1_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in atl1_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * atl1_probe initializes an adapter identified by a pci_dev structure. |
| * The OS initialization, configuring of the adapter private structure, |
| * and a hardware reset occur. |
| */ |
| static int __devinit atl1_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct atl1_adapter *adapter; |
| static int cards_found = 0; |
| int err; |
| |
| err = pci_enable_device(pdev); |
| if (err) |
| return err; |
| |
| /* |
| * The atl1 chip can DMA to 64-bit addresses, but it uses a single |
| * shared register for the high 32 bits, so only a single, aligned, |
| * 4 GB physical address range can be used at a time. |
| * |
| * Supporting 64-bit DMA on this hardware is more trouble than it's |
| * worth. It is far easier to limit to 32-bit DMA than update |
| * various kernel subsystems to support the mechanics required by a |
| * fixed-high-32-bit system. |
| */ |
| err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); |
| if (err) { |
| dev_err(&pdev->dev, "no usable DMA configuration\n"); |
| goto err_dma; |
| } |
| /* Mark all PCI regions associated with PCI device |
| * pdev as being reserved by owner atl1_driver_name |
| */ |
| err = pci_request_regions(pdev, atl1_driver_name); |
| if (err) |
| goto err_request_regions; |
| |
| /* Enables bus-mastering on the device and calls |
| * pcibios_set_master to do the needed arch specific settings |
| */ |
| pci_set_master(pdev); |
| |
| netdev = alloc_etherdev(sizeof(struct atl1_adapter)); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto err_alloc_etherdev; |
| } |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| pci_set_drvdata(pdev, netdev); |
| adapter = netdev_priv(netdev); |
| adapter->netdev = netdev; |
| adapter->pdev = pdev; |
| adapter->hw.back = adapter; |
| |
| adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); |
| if (!adapter->hw.hw_addr) { |
| err = -EIO; |
| goto err_pci_iomap; |
| } |
| /* get device revision number */ |
| adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + |
| (REG_MASTER_CTRL + 2)); |
| dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); |
| |
| /* set default ring resource counts */ |
| adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; |
| adapter->tpd_ring.count = ATL1_DEFAULT_TPD; |
| |
| adapter->mii.dev = netdev; |
| adapter->mii.mdio_read = mdio_read; |
| adapter->mii.mdio_write = mdio_write; |
| adapter->mii.phy_id_mask = 0x1f; |
| adapter->mii.reg_num_mask = 0x1f; |
| |
| netdev->open = &atl1_open; |
| netdev->stop = &atl1_close; |
| netdev->hard_start_xmit = &atl1_xmit_frame; |
| netdev->get_stats = &atl1_get_stats; |
| netdev->set_multicast_list = &atl1_set_multi; |
| netdev->set_mac_address = &atl1_set_mac; |
| netdev->change_mtu = &atl1_change_mtu; |
| netdev->do_ioctl = &atl1_ioctl; |
| netdev->tx_timeout = &atl1_tx_timeout; |
| netdev->watchdog_timeo = 5 * HZ; |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| netdev->poll_controller = atl1_poll_controller; |
| #endif |
| netdev->vlan_rx_register = atl1_vlan_rx_register; |
| |
| netdev->ethtool_ops = &atl1_ethtool_ops; |
| adapter->bd_number = cards_found; |
| |
| /* setup the private structure */ |
| err = atl1_sw_init(adapter); |
| if (err) |
| goto err_common; |
| |
| netdev->features = NETIF_F_HW_CSUM; |
| netdev->features |= NETIF_F_SG; |
| netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); |
| |
| /* |
| * FIXME - Until tso performance gets fixed, disable the feature. |
| * Enable it with ethtool -K if desired. |
| */ |
| /* netdev->features |= NETIF_F_TSO; */ |
| |
| netdev->features |= NETIF_F_LLTX; |
| |
| /* |
| * patch for some L1 of old version, |
| * the final version of L1 may not need these |
| * patches |
| */ |
| /* atl1_pcie_patch(adapter); */ |
| |
| /* really reset GPHY core */ |
| iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE); |
| |
| /* |
| * reset the controller to |
| * put the device in a known good starting state |
| */ |
| if (atl1_reset_hw(&adapter->hw)) { |
| err = -EIO; |
| goto err_common; |
| } |
| |
| /* copy the MAC address out of the EEPROM */ |
| atl1_read_mac_addr(&adapter->hw); |
| memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); |
| |
| if (!is_valid_ether_addr(netdev->dev_addr)) { |
| err = -EIO; |
| goto err_common; |
| } |
| |
| atl1_check_options(adapter); |
| |
| /* pre-init the MAC, and setup link */ |
| err = atl1_init_hw(&adapter->hw); |
| if (err) { |
| err = -EIO; |
| goto err_common; |
| } |
| |
| atl1_pcie_patch(adapter); |
| /* assume we have no link for now */ |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| |
| init_timer(&adapter->watchdog_timer); |
| adapter->watchdog_timer.function = &atl1_watchdog; |
| adapter->watchdog_timer.data = (unsigned long)adapter; |
| |
| init_timer(&adapter->phy_config_timer); |
| adapter->phy_config_timer.function = &atl1_phy_config; |
| adapter->phy_config_timer.data = (unsigned long)adapter; |
| adapter->phy_timer_pending = false; |
| |
| INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); |
| |
| INIT_WORK(&adapter->link_chg_task, atl1_link_chg_task); |
| |
| INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); |
| |
| err = register_netdev(netdev); |
| if (err) |
| goto err_common; |
| |
| cards_found++; |
| atl1_via_workaround(adapter); |
| return 0; |
| |
| err_common: |
| pci_iounmap(pdev, adapter->hw.hw_addr); |
| err_pci_iomap: |
| free_netdev(netdev); |
| err_alloc_etherdev: |
| pci_release_regions(pdev); |
| err_dma: |
| err_request_regions: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /* |
| * atl1_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * atl1_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. The could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| */ |
| static void __devexit atl1_remove(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1_adapter *adapter; |
| /* Device not available. Return. */ |
| if (!netdev) |
| return; |
| |
| adapter = netdev_priv(netdev); |
| |
| /* Some atl1 boards lack persistent storage for their MAC, and get it |
| * from the BIOS during POST. If we've been messing with the MAC |
| * address, we need to save the permanent one. |
| */ |
| if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { |
| memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, |
| ETH_ALEN); |
| atl1_set_mac_addr(&adapter->hw); |
| } |
| |
| iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE); |
| unregister_netdev(netdev); |
| pci_iounmap(pdev, adapter->hw.hw_addr); |
| pci_release_regions(pdev); |
| free_netdev(netdev); |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_driver atl1_driver = { |
| .name = atl1_driver_name, |
| .id_table = atl1_pci_tbl, |
| .probe = atl1_probe, |
| .remove = __devexit_p(atl1_remove), |
| .suspend = atl1_suspend, |
| .resume = atl1_resume |
| }; |
| |
| /* |
| * atl1_exit_module - Driver Exit Cleanup Routine |
| * |
| * atl1_exit_module is called just before the driver is removed |
| * from memory. |
| */ |
| static void __exit atl1_exit_module(void) |
| { |
| pci_unregister_driver(&atl1_driver); |
| } |
| |
| /* |
| * atl1_init_module - Driver Registration Routine |
| * |
| * atl1_init_module is the first routine called when the driver is |
| * loaded. All it does is register with the PCI subsystem. |
| */ |
| static int __init atl1_init_module(void) |
| { |
| return pci_register_driver(&atl1_driver); |
| } |
| |
| module_init(atl1_init_module); |
| module_exit(atl1_exit_module); |