drivers/net/myri_sbus.h - kernel/msm-4.9 - Gitiles

 /* myri_sbus.h: Defines for MyriCOM MyriNET SBUS card driver.
  *
  * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
  */

 #ifndef _MYRI_SBUS_H
 #define _MYRI_SBUS_H

 /* LANAI Registers */
 #define LANAI_IPF0	0x00UL		/* Context zero state registers.*/
 #define LANAI_CUR0	0x04UL
 #define LANAI_PREV0	0x08UL
 #define LANAI_DATA0	0x0cUL
 #define LANAI_DPF0	0x10UL
 #define LANAI_IPF1	0x14UL		/* Context one state registers.	*/
 #define LANAI_CUR1	0x18UL
 #define LANAI_PREV1	0x1cUL
 #define LANAI_DATA1	0x20UL
 #define LANAI_DPF1	0x24UL
 #define LANAI_ISTAT	0x28UL		/* Interrupt status.		*/
 #define LANAI_EIMASK	0x2cUL		/* External IRQ mask.		*/
 #define LANAI_ITIMER	0x30UL		/* IRQ timer.			*/
 #define LANAI_RTC	0x34UL		/* Real Time Clock		*/
 #define LANAI_CSUM	0x38UL		/* Checksum.			*/
 #define LANAI_DMAXADDR	0x3cUL		/* SBUS DMA external address.	*/
 #define LANAI_DMALADDR	0x40UL		/* SBUS DMA local address.	*/
 #define LANAI_DMACTR	0x44UL		/* SBUS DMA counter.		*/
 #define LANAI_RXDMAPTR	0x48UL		/* Receive DMA pointer.		*/
 #define LANAI_RXDMALIM	0x4cUL		/* Receive DMA limit.		*/
 #define LANAI_TXDMAPTR	0x50UL		/* Transmit DMA pointer.	*/
 #define LANAI_TXDMALIM	0x54UL		/* Transmit DMA limit.		*/
 #define LANAI_TXDMALIMT	0x58UL		/* Transmit DMA limit w/tail.	*/
 	/* 0x5cUL, reserved */
 #define LANAI_RBYTE	0x60UL		/* Receive byte.		*/
 	/* 0x64-->0x6c, reserved */
 #define LANAI_RHALF	0x70UL		/* Receive half-word.		*/
 	/* 0x72UL, reserved */
 #define LANAI_RWORD	0x74UL		/* Receive word.		*/
 #define LANAI_SALIGN	0x78UL		/* Send align.			*/
 #define LANAI_SBYTE	0x7cUL		/* SingleSend send-byte.	*/
 #define LANAI_SHALF	0x80UL		/* SingleSend send-halfword.	*/
 #define LANAI_SWORD	0x84UL		/* SingleSend send-word.	*/
 #define LANAI_SSENDT	0x88UL		/* SingleSend special.		*/
 #define LANAI_DMADIR	0x8cUL		/* DMA direction.		*/
 #define LANAI_DMASTAT	0x90UL		/* DMA status.			*/
 #define LANAI_TIMEO	0x94UL		/* Timeout register.		*/
 #define LANAI_MYRINET	0x98UL		/* XXX MAGIC myricom thing	*/
 #define LANAI_HWDEBUG	0x9cUL		/* Hardware debugging reg.	*/
 #define LANAI_LEDS	0xa0UL		/* LED control.			*/
 #define LANAI_VERS	0xa4UL		/* Version register.		*/
 #define LANAI_LINKON	0xa8UL		/* Link activation reg.		*/
 	/* 0xac-->0x104, reserved */
 #define LANAI_CVAL	0x108UL		/* Clock value register.	*/
 #define LANAI_REG_SIZE	0x10cUL

 /* Interrupt status bits. */
 #define ISTAT_DEBUG	0x80000000
 #define ISTAT_HOST	0x40000000
 #define ISTAT_LAN7	0x00800000
 #define ISTAT_LAN6	0x00400000
 #define ISTAT_LAN5	0x00200000
 #define ISTAT_LAN4	0x00100000
 #define ISTAT_LAN3	0x00080000
 #define ISTAT_LAN2	0x00040000
 #define ISTAT_LAN1	0x00020000
 #define ISTAT_LAN0	0x00010000
 #define ISTAT_WRDY	0x00008000
 #define ISTAT_HRDY	0x00004000
 #define ISTAT_SRDY	0x00002000
 #define ISTAT_LINK	0x00001000
 #define ISTAT_FRES	0x00000800
 #define ISTAT_NRES	0x00000800
 #define ISTAT_WAKE	0x00000400
 #define ISTAT_OB2	0x00000200
 #define ISTAT_OB1	0x00000100
 #define ISTAT_TAIL	0x00000080
 #define ISTAT_WDOG	0x00000040
 #define ISTAT_TIME	0x00000020
 #define ISTAT_DMA	0x00000010
 #define ISTAT_SEND	0x00000008
 #define ISTAT_BUF	0x00000004
 #define ISTAT_RECV	0x00000002
 #define ISTAT_BRDY	0x00000001

 /* MYRI Registers */
 #define MYRI_RESETOFF	0x00UL
 #define MYRI_RESETON	0x04UL
 #define MYRI_IRQOFF	0x08UL
 #define MYRI_IRQON	0x0cUL
 #define MYRI_WAKEUPOFF	0x10UL
 #define MYRI_WAKEUPON	0x14UL
 #define MYRI_IRQREAD	0x18UL
 	/* 0x1c-->0x3ffc, reserved */
 #define MYRI_LOCALMEM	0x4000UL
 #define MYRI_REG_SIZE	0x25000UL

 /* Shared memory interrupt mask. */
 #define SHMEM_IMASK_RX		0x00000002
 #define SHMEM_IMASK_TX		0x00000001

 /* Just to make things readable. */
 #define KERNEL_CHANNEL		0

 /* The size of this must be >= 129 bytes. */
 struct myri_eeprom {
 	unsigned int		cval;
 	unsigned short		cpuvers;
 	unsigned char		id[6];
 	unsigned int		ramsz;
 	unsigned char		fvers[32];
 	unsigned char		mvers[16];
 	unsigned short		dlval;
 	unsigned short		brd_type;
 	unsigned short		bus_type;
 	unsigned short		prod_code;
 	unsigned int		serial_num;
 	unsigned short		_reserved[24];
 	unsigned int		_unused[2];
 };

 /* EEPROM bus types, only SBUS is valid in this driver. */
 #define BUS_TYPE_SBUS		1

 /* EEPROM CPU revisions. */
 #define CPUVERS_2_3		0x0203
 #define CPUVERS_3_0		0x0300
 #define CPUVERS_3_1		0x0301
 #define CPUVERS_3_2		0x0302
 #define CPUVERS_4_0		0x0400
 #define CPUVERS_4_1		0x0401
 #define CPUVERS_4_2		0x0402
 #define CPUVERS_5_0		0x0500

 /* MYRI Control Registers */
 #define MYRICTRL_CTRL		0x00UL
 #define MYRICTRL_IRQLVL		0x02UL
 #define MYRICTRL_REG_SIZE	0x04UL

 /* Global control register defines. */
 #define CONTROL_ROFF		0x8000	/* Reset OFF.		*/
 #define CONTROL_RON		0x4000	/* Reset ON.		*/
 #define CONTROL_EIRQ		0x2000	/* Enable IRQ's.	*/
 #define CONTROL_DIRQ		0x1000	/* Disable IRQ's.	*/
 #define CONTROL_WON		0x0800	/* Wake-up ON.		*/

 #define MYRI_SCATTER_ENTRIES	8
 #define MYRI_GATHER_ENTRIES	16

 struct myri_sglist {
 	u32 addr;
 	u32 len;
 };

 struct myri_rxd {
 	struct myri_sglist myri_scatters[MYRI_SCATTER_ENTRIES];	/* DMA scatter list.*/
 	u32 csum;	/* HW computed checksum.    */
 	u32 ctx;
 	u32 num_sg;	/* Total scatter entries.   */
 };

 struct myri_txd {
 	struct myri_sglist myri_gathers[MYRI_GATHER_ENTRIES]; /* DMA scatter list.  */
 	u32 num_sg;	/* Total scatter entries.   */
 	u16 addr[4];	/* XXX address              */
 	u32 chan;
 	u32 len;	/* Total length of packet.  */
 	u32 csum_off;	/* Where data to csum is.   */
 	u32 csum_field;	/* Where csum goes in pkt.  */
 };

 #define MYRINET_MTU        8432
 #define RX_ALLOC_SIZE      8448
 #define MYRI_PAD_LEN       2
 #define RX_COPY_THRESHOLD  256

 /* These numbers are cast in stone, new firmware is needed if
  * you want to change them.
  */
 #define TX_RING_MAXSIZE    16
 #define RX_RING_MAXSIZE    16

 #define TX_RING_SIZE       16
 #define RX_RING_SIZE       16

 /* GRRR... */
 static __inline__ int NEXT_RX(int num)
 {
 	/* XXX >=??? */
 	if(++num > RX_RING_SIZE)
 		num = 0;
 	return num;
 }

 static __inline__ int PREV_RX(int num)
 {
 	if(--num < 0)
 		num = RX_RING_SIZE;
 	return num;
 }

 #define NEXT_TX(num)	(((num) + 1) & (TX_RING_SIZE - 1))
 #define PREV_TX(num)	(((num) - 1) & (TX_RING_SIZE - 1))

 #define TX_BUFFS_AVAIL(head, tail)		\
 	((head) <= (tail) ?			\
 	 (head) + (TX_RING_SIZE - 1) - (tail) :	\
 	 (head) - (tail) - 1)

 struct sendq {
 	u32	tail;
 	u32	head;
 	u32	hdebug;
 	u32	mdebug;
 	struct myri_txd	myri_txd[TX_RING_MAXSIZE];
 };

 struct recvq {
 	u32	head;
 	u32	tail;
 	u32	hdebug;
 	u32	mdebug;
 	struct myri_rxd	myri_rxd[RX_RING_MAXSIZE + 1];
 };

 #define MYRI_MLIST_SIZE 8

 struct mclist {
 	u32 maxlen;
 	u32 len;
 	u32 cache;
 	struct pair {
 		u8 addr[8];
 		u32 val;
 	} mc_pairs[MYRI_MLIST_SIZE];
 	u8 bcast_addr[8];
 };

 struct myri_channel {
 	u32		state;		/* State of the channel.	*/
 	u32		busy;		/* Channel is busy.		*/
 	struct sendq	sendq;		/* Device tx queue.		*/
 	struct recvq	recvq;		/* Device rx queue.		*/
 	struct recvq	recvqa;		/* Device rx queue acked.	*/
 	u32		rbytes;		/* Receive bytes.		*/
 	u32		sbytes;		/* Send bytes.			*/
 	u32		rmsgs;		/* Receive messages.		*/
 	u32		smsgs;		/* Send messages.		*/
 	struct mclist	mclist;		/* Device multicast list.	*/
 };

 /* Values for per-channel state. */
 #define STATE_WFH	0		/* Waiting for HOST.		*/
 #define STATE_WFN	1		/* Waiting for NET.		*/
 #define STATE_READY	2		/* Ready.			*/

 struct myri_shmem {
 	u8	addr[8];		/* Board's address.		*/
 	u32	nchan;			/* Number of channels.		*/
 	u32	burst;			/* SBUS dma burst enable.	*/
 	u32	shakedown;		/* DarkkkkStarrr Crashesss...	*/
 	u32	send;			/* Send wanted.			*/
 	u32	imask;			/* Interrupt enable mask.	*/
 	u32	mlevel;			/* Map level.			*/
 	u32	debug[4];		/* Misc. debug areas.		*/
 	struct myri_channel channel;	/* Only one channel on a host.	*/
 };

 struct myri_eth {
 	/* These are frequently accessed, keep together
 	 * to obtain good cache hit rates.
 	 */
 	spinlock_t			irq_lock;
 	struct myri_shmem __iomem	*shmem;		/* Shared data structures.    */
 	void __iomem			*cregs;		/* Control register space.    */
 	struct recvq __iomem		*rqack;		/* Where we ack rx's.         */
 	struct recvq __iomem		*rq;		/* Where we put buffers.      */
 	struct sendq __iomem		*sq;		/* Where we stuff tx's.       */
 	struct net_device		*dev;		/* Linux/NET dev struct.      */
 	int				tx_old;		/* To speed up tx cleaning.   */
 	void __iomem			*lregs;		/* Quick ptr to LANAI regs.   */
 	struct sk_buff	       *rx_skbs[RX_RING_SIZE+1];/* RX skb's                   */
 	struct sk_buff	       *tx_skbs[TX_RING_SIZE];  /* TX skb's                   */

 	/* These are less frequently accessed. */
 	void __iomem			*regs;          /* MyriCOM register space.    */
 	void __iomem			*lanai;		/* View 2 of register space.  */
 	unsigned int			myri_bursts;	/* SBUS bursts.               */
 	struct myri_eeprom		eeprom;		/* Local copy of EEPROM.      */
 	unsigned int			reg_size;	/* Size of register space.    */
 	unsigned int			shmem_base;	/* Offset to shared ram.      */
 	struct sbus_dev			*myri_sdev;	/* Our SBUS device struct.    */
 };

 /* We use this to acquire receive skb's that we can DMA directly into. */
 #define ALIGNED_RX_SKB_ADDR(addr) \
         ((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr))
 static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags)
 {
 	struct sk_buff *skb;

 	skb = alloc_skb(length + 64, gfp_flags);
 	if(skb) {
 		int offset = ALIGNED_RX_SKB_ADDR(skb->data);

 		if(offset)
 			skb_reserve(skb, offset);
 	}
 	return skb;
 }

 #endif /* !(_MYRI_SBUS_H) */
	/* myri_sbus.h: Defines for MyriCOM MyriNET SBUS card driver.
	*
	* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
	*/

	#ifndef _MYRI_SBUS_H
	#define _MYRI_SBUS_H

	/* LANAI Registers */
	#define LANAI_IPF0 0x00UL /* Context zero state registers.*/
	#define LANAI_CUR0 0x04UL
	#define LANAI_PREV0 0x08UL
	#define LANAI_DATA0 0x0cUL
	#define LANAI_DPF0 0x10UL
	#define LANAI_IPF1 0x14UL /* Context one state registers. */
	#define LANAI_CUR1 0x18UL
	#define LANAI_PREV1 0x1cUL
	#define LANAI_DATA1 0x20UL
	#define LANAI_DPF1 0x24UL
	#define LANAI_ISTAT 0x28UL /* Interrupt status. */
	#define LANAI_EIMASK 0x2cUL /* External IRQ mask. */
	#define LANAI_ITIMER 0x30UL /* IRQ timer. */
	#define LANAI_RTC 0x34UL /* Real Time Clock */
	#define LANAI_CSUM 0x38UL /* Checksum. */
	#define LANAI_DMAXADDR 0x3cUL /* SBUS DMA external address. */
	#define LANAI_DMALADDR 0x40UL /* SBUS DMA local address. */
	#define LANAI_DMACTR 0x44UL /* SBUS DMA counter. */
	#define LANAI_RXDMAPTR 0x48UL /* Receive DMA pointer. */
	#define LANAI_RXDMALIM 0x4cUL /* Receive DMA limit. */
	#define LANAI_TXDMAPTR 0x50UL /* Transmit DMA pointer. */
	#define LANAI_TXDMALIM 0x54UL /* Transmit DMA limit. */
	#define LANAI_TXDMALIMT 0x58UL /* Transmit DMA limit w/tail. */
	/* 0x5cUL, reserved */
	#define LANAI_RBYTE 0x60UL /* Receive byte. */
	/* 0x64-->0x6c, reserved */
	#define LANAI_RHALF 0x70UL /* Receive half-word. */
	/* 0x72UL, reserved */
	#define LANAI_RWORD 0x74UL /* Receive word. */
	#define LANAI_SALIGN 0x78UL /* Send align. */
	#define LANAI_SBYTE 0x7cUL /* SingleSend send-byte. */
	#define LANAI_SHALF 0x80UL /* SingleSend send-halfword. */
	#define LANAI_SWORD 0x84UL /* SingleSend send-word. */
	#define LANAI_SSENDT 0x88UL /* SingleSend special. */
	#define LANAI_DMADIR 0x8cUL /* DMA direction. */
	#define LANAI_DMASTAT 0x90UL /* DMA status. */
	#define LANAI_TIMEO 0x94UL /* Timeout register. */
	#define LANAI_MYRINET 0x98UL /* XXX MAGIC myricom thing */
	#define LANAI_HWDEBUG 0x9cUL /* Hardware debugging reg. */
	#define LANAI_LEDS 0xa0UL /* LED control. */
	#define LANAI_VERS 0xa4UL /* Version register. */
	#define LANAI_LINKON 0xa8UL /* Link activation reg. */
	/* 0xac-->0x104, reserved */
	#define LANAI_CVAL 0x108UL /* Clock value register. */
	#define LANAI_REG_SIZE 0x10cUL

	/* Interrupt status bits. */
	#define ISTAT_DEBUG 0x80000000
	#define ISTAT_HOST 0x40000000
	#define ISTAT_LAN7 0x00800000
	#define ISTAT_LAN6 0x00400000
	#define ISTAT_LAN5 0x00200000
	#define ISTAT_LAN4 0x00100000
	#define ISTAT_LAN3 0x00080000
	#define ISTAT_LAN2 0x00040000
	#define ISTAT_LAN1 0x00020000
	#define ISTAT_LAN0 0x00010000
	#define ISTAT_WRDY 0x00008000
	#define ISTAT_HRDY 0x00004000
	#define ISTAT_SRDY 0x00002000
	#define ISTAT_LINK 0x00001000
	#define ISTAT_FRES 0x00000800
	#define ISTAT_NRES 0x00000800
	#define ISTAT_WAKE 0x00000400
	#define ISTAT_OB2 0x00000200
	#define ISTAT_OB1 0x00000100
	#define ISTAT_TAIL 0x00000080
	#define ISTAT_WDOG 0x00000040
	#define ISTAT_TIME 0x00000020
	#define ISTAT_DMA 0x00000010
	#define ISTAT_SEND 0x00000008
	#define ISTAT_BUF 0x00000004
	#define ISTAT_RECV 0x00000002
	#define ISTAT_BRDY 0x00000001

	/* MYRI Registers */
	#define MYRI_RESETOFF 0x00UL
	#define MYRI_RESETON 0x04UL
	#define MYRI_IRQOFF 0x08UL
	#define MYRI_IRQON 0x0cUL
	#define MYRI_WAKEUPOFF 0x10UL
	#define MYRI_WAKEUPON 0x14UL
	#define MYRI_IRQREAD 0x18UL
	/* 0x1c-->0x3ffc, reserved */
	#define MYRI_LOCALMEM 0x4000UL
	#define MYRI_REG_SIZE 0x25000UL

	/* Shared memory interrupt mask. */
	#define SHMEM_IMASK_RX 0x00000002
	#define SHMEM_IMASK_TX 0x00000001

	/* Just to make things readable. */
	#define KERNEL_CHANNEL 0

	/* The size of this must be >= 129 bytes. */
	struct myri_eeprom {
	unsigned int cval;
	unsigned short cpuvers;
	unsigned char id[6];
	unsigned int ramsz;
	unsigned char fvers[32];
	unsigned char mvers[16];
	unsigned short dlval;
	unsigned short brd_type;
	unsigned short bus_type;
	unsigned short prod_code;
	unsigned int serial_num;
	unsigned short _reserved[24];
	unsigned int _unused[2];
	};

	/* EEPROM bus types, only SBUS is valid in this driver. */
	#define BUS_TYPE_SBUS 1

	/* EEPROM CPU revisions. */
	#define CPUVERS_2_3 0x0203
	#define CPUVERS_3_0 0x0300
	#define CPUVERS_3_1 0x0301
	#define CPUVERS_3_2 0x0302
	#define CPUVERS_4_0 0x0400
	#define CPUVERS_4_1 0x0401
	#define CPUVERS_4_2 0x0402
	#define CPUVERS_5_0 0x0500

	/* MYRI Control Registers */
	#define MYRICTRL_CTRL 0x00UL
	#define MYRICTRL_IRQLVL 0x02UL
	#define MYRICTRL_REG_SIZE 0x04UL

	/* Global control register defines. */
	#define CONTROL_ROFF 0x8000 /* Reset OFF. */
	#define CONTROL_RON 0x4000 /* Reset ON. */
	#define CONTROL_EIRQ 0x2000 /* Enable IRQ's. */
	#define CONTROL_DIRQ 0x1000 /* Disable IRQ's. */
	#define CONTROL_WON 0x0800 /* Wake-up ON. */

	#define MYRI_SCATTER_ENTRIES 8
	#define MYRI_GATHER_ENTRIES 16

	struct myri_sglist {
	u32 addr;
	u32 len;
	};

	struct myri_rxd {
	struct myri_sglist myri_scatters[MYRI_SCATTER_ENTRIES]; /* DMA scatter list.*/
	u32 csum; /* HW computed checksum. */
	u32 ctx;
	u32 num_sg; /* Total scatter entries. */
	};

	struct myri_txd {
	struct myri_sglist myri_gathers[MYRI_GATHER_ENTRIES]; /* DMA scatter list. */
	u32 num_sg; /* Total scatter entries. */
	u16 addr[4]; /* XXX address */
	u32 chan;
	u32 len; /* Total length of packet. */
	u32 csum_off; /* Where data to csum is. */
	u32 csum_field; /* Where csum goes in pkt. */
	};

	#define MYRINET_MTU 8432
	#define RX_ALLOC_SIZE 8448
	#define MYRI_PAD_LEN 2
	#define RX_COPY_THRESHOLD 256

	/* These numbers are cast in stone, new firmware is needed if
	* you want to change them.
	*/
	#define TX_RING_MAXSIZE 16
	#define RX_RING_MAXSIZE 16

	#define TX_RING_SIZE 16
	#define RX_RING_SIZE 16

	/* GRRR... */
	static __inline__ int NEXT_RX(int num)
	{
	/* XXX >=??? */
	if(++num > RX_RING_SIZE)
	num = 0;
	return num;
	}

	static __inline__ int PREV_RX(int num)
	{
	if(--num < 0)
	num = RX_RING_SIZE;
	return num;
	}

	#define NEXT_TX(num) (((num) + 1) & (TX_RING_SIZE - 1))
	#define PREV_TX(num) (((num) - 1) & (TX_RING_SIZE - 1))

	#define TX_BUFFS_AVAIL(head, tail) \
	((head) <= (tail) ? \
	(head) + (TX_RING_SIZE - 1) - (tail) : \
	(head) - (tail) - 1)

	struct sendq {
	u32 tail;
	u32 head;
	u32 hdebug;
	u32 mdebug;
	struct myri_txd myri_txd[TX_RING_MAXSIZE];
	};

	struct recvq {
	u32 head;
	u32 tail;
	u32 hdebug;
	u32 mdebug;
	struct myri_rxd myri_rxd[RX_RING_MAXSIZE + 1];
	};

	#define MYRI_MLIST_SIZE 8

	struct mclist {
	u32 maxlen;
	u32 len;
	u32 cache;
	struct pair {
	u8 addr[8];
	u32 val;
	} mc_pairs[MYRI_MLIST_SIZE];
	u8 bcast_addr[8];
	};

	struct myri_channel {
	u32 state; /* State of the channel. */
	u32 busy; /* Channel is busy. */
	struct sendq sendq; /* Device tx queue. */
	struct recvq recvq; /* Device rx queue. */
	struct recvq recvqa; /* Device rx queue acked. */
	u32 rbytes; /* Receive bytes. */
	u32 sbytes; /* Send bytes. */
	u32 rmsgs; /* Receive messages. */
	u32 smsgs; /* Send messages. */
	struct mclist mclist; /* Device multicast list. */
	};

	/* Values for per-channel state. */
	#define STATE_WFH 0 /* Waiting for HOST. */
	#define STATE_WFN 1 /* Waiting for NET. */
	#define STATE_READY 2 /* Ready. */

	struct myri_shmem {
	u8 addr[8]; /* Board's address. */
	u32 nchan; /* Number of channels. */
	u32 burst; /* SBUS dma burst enable. */
	u32 shakedown; /* DarkkkkStarrr Crashesss... */
	u32 send; /* Send wanted. */
	u32 imask; /* Interrupt enable mask. */
	u32 mlevel; /* Map level. */
	u32 debug[4]; /* Misc. debug areas. */
	struct myri_channel channel; /* Only one channel on a host. */
	};

	struct myri_eth {
	/* These are frequently accessed, keep together
	* to obtain good cache hit rates.
	*/
	spinlock_t irq_lock;
	struct myri_shmem __iomem shmem; / Shared data structures. */
	void __iomem cregs; / Control register space. */
	struct recvq __iomem rqack; / Where we ack rx's. */
	struct recvq __iomem rq; / Where we put buffers. */
	struct sendq __iomem sq; / Where we stuff tx's. */
	struct net_device dev; / Linux/NET dev struct. */
	int tx_old; /* To speed up tx cleaning. */
	void __iomem lregs; / Quick ptr to LANAI regs. */
	struct sk_buff rx_skbs[RX_RING_SIZE+1];/ RX skb's */
	struct sk_buff tx_skbs[TX_RING_SIZE]; / TX skb's */

	/* These are less frequently accessed. */
	void __iomem regs; / MyriCOM register space. */
	void __iomem lanai; / View 2 of register space. */
	unsigned int myri_bursts; /* SBUS bursts. */
	struct myri_eeprom eeprom; /* Local copy of EEPROM. */
	unsigned int reg_size; /* Size of register space. */
	unsigned int shmem_base; /* Offset to shared ram. */
	struct sbus_dev myri_sdev; / Our SBUS device struct. */
	};

	/* We use this to acquire receive skb's that we can DMA directly into. */
	#define ALIGNED_RX_SKB_ADDR(addr) \
	((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr))
	static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags)
	{
	struct sk_buff *skb;

	skb = alloc_skb(length + 64, gfp_flags);
	if(skb) {
	int offset = ALIGNED_RX_SKB_ADDR(skb->data);

	if(offset)
	skb_reserve(skb, offset);
	}
	return skb;
	}

	#endif /* !(_MYRI_SBUS_H) */