| /* |
| * f75375s.c - driver for the Fintek F75375/SP and F75373 |
| * hardware monitoring features |
| * Copyright (C) 2006-2007 Riku Voipio |
| * |
| * Datasheets available at: |
| * |
| * f75375: |
| * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf |
| * |
| * f75373: |
| * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/i2c.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/f75375s.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END }; |
| |
| /* Insmod parameters */ |
| I2C_CLIENT_INSMOD_2(f75373, f75375); |
| |
| /* Fintek F75375 registers */ |
| #define F75375_REG_CONFIG0 0x0 |
| #define F75375_REG_CONFIG1 0x1 |
| #define F75375_REG_CONFIG2 0x2 |
| #define F75375_REG_CONFIG3 0x3 |
| #define F75375_REG_ADDR 0x4 |
| #define F75375_REG_INTR 0x31 |
| #define F75375_CHIP_ID 0x5A |
| #define F75375_REG_VERSION 0x5C |
| #define F75375_REG_VENDOR 0x5D |
| #define F75375_REG_FAN_TIMER 0x60 |
| |
| #define F75375_REG_VOLT(nr) (0x10 + (nr)) |
| #define F75375_REG_VOLT_HIGH(nr) (0x20 + (nr) * 2) |
| #define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2) |
| |
| #define F75375_REG_TEMP(nr) (0x14 + (nr)) |
| #define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2) |
| #define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2) |
| |
| #define F75375_REG_FAN(nr) (0x16 + (nr) * 2) |
| #define F75375_REG_FAN_MIN(nr) (0x2C + (nr) * 2) |
| #define F75375_REG_FAN_FULL(nr) (0x70 + (nr) * 0x10) |
| #define F75375_REG_FAN_PWM_DUTY(nr) (0x76 + (nr) * 0x10) |
| #define F75375_REG_FAN_PWM_CLOCK(nr) (0x7D + (nr) * 0x10) |
| |
| #define F75375_REG_FAN_EXP(nr) (0x74 + (nr) * 0x10) |
| #define F75375_REG_FAN_B_TEMP(nr, step) ((0xA0 + (nr) * 0x10) + (step)) |
| #define F75375_REG_FAN_B_SPEED(nr, step) \ |
| ((0xA5 + (nr) * 0x10) + (step) * 2) |
| |
| #define F75375_REG_PWM1_RAISE_DUTY 0x69 |
| #define F75375_REG_PWM2_RAISE_DUTY 0x6A |
| #define F75375_REG_PWM1_DROP_DUTY 0x6B |
| #define F75375_REG_PWM2_DROP_DUTY 0x6C |
| |
| #define FAN_CTRL_LINEAR(nr) (4 + nr) |
| #define FAN_CTRL_MODE(nr) (5 + ((nr) * 2)) |
| |
| /* |
| * Data structures and manipulation thereof |
| */ |
| |
| struct f75375_data { |
| unsigned short addr; |
| struct device *hwmon_dev; |
| |
| const char *name; |
| int kind; |
| struct mutex update_lock; /* protect register access */ |
| char valid; |
| unsigned long last_updated; /* In jiffies */ |
| unsigned long last_limits; /* In jiffies */ |
| |
| /* Register values */ |
| u8 in[4]; |
| u8 in_max[4]; |
| u8 in_min[4]; |
| u16 fan[2]; |
| u16 fan_min[2]; |
| u16 fan_full[2]; |
| u16 fan_exp[2]; |
| u8 fan_timer; |
| u8 pwm[2]; |
| u8 pwm_mode[2]; |
| u8 pwm_enable[2]; |
| s8 temp[2]; |
| s8 temp_high[2]; |
| s8 temp_max_hyst[2]; |
| }; |
| |
| static int f75375_detect(struct i2c_client *client, int kind, |
| struct i2c_board_info *info); |
| static int f75375_probe(struct i2c_client *client, |
| const struct i2c_device_id *id); |
| static int f75375_remove(struct i2c_client *client); |
| |
| static const struct i2c_device_id f75375_id[] = { |
| { "f75373", f75373 }, |
| { "f75375", f75375 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, f75375_id); |
| |
| static struct i2c_driver f75375_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "f75375", |
| }, |
| .probe = f75375_probe, |
| .remove = f75375_remove, |
| .id_table = f75375_id, |
| .detect = f75375_detect, |
| .address_data = &addr_data, |
| }; |
| |
| static inline int f75375_read8(struct i2c_client *client, u8 reg) |
| { |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| /* in most cases, should be called while holding update_lock */ |
| static inline u16 f75375_read16(struct i2c_client *client, u8 reg) |
| { |
| return ((i2c_smbus_read_byte_data(client, reg) << 8) |
| | i2c_smbus_read_byte_data(client, reg + 1)); |
| } |
| |
| static inline void f75375_write8(struct i2c_client *client, u8 reg, |
| u8 value) |
| { |
| i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| static inline void f75375_write16(struct i2c_client *client, u8 reg, |
| u16 value) |
| { |
| int err = i2c_smbus_write_byte_data(client, reg, (value << 8)); |
| if (err) |
| return; |
| i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF)); |
| } |
| |
| static struct f75375_data *f75375_update_device(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int nr; |
| |
| mutex_lock(&data->update_lock); |
| |
| /* Limit registers cache is refreshed after 60 seconds */ |
| if (time_after(jiffies, data->last_limits + 60 * HZ) |
| || !data->valid) { |
| for (nr = 0; nr < 2; nr++) { |
| data->temp_high[nr] = |
| f75375_read8(client, F75375_REG_TEMP_HIGH(nr)); |
| data->temp_max_hyst[nr] = |
| f75375_read8(client, F75375_REG_TEMP_HYST(nr)); |
| data->fan_full[nr] = |
| f75375_read16(client, F75375_REG_FAN_FULL(nr)); |
| data->fan_min[nr] = |
| f75375_read16(client, F75375_REG_FAN_MIN(nr)); |
| data->fan_exp[nr] = |
| f75375_read16(client, F75375_REG_FAN_EXP(nr)); |
| data->pwm[nr] = f75375_read8(client, |
| F75375_REG_FAN_PWM_DUTY(nr)); |
| |
| } |
| for (nr = 0; nr < 4; nr++) { |
| data->in_max[nr] = |
| f75375_read8(client, F75375_REG_VOLT_HIGH(nr)); |
| data->in_min[nr] = |
| f75375_read8(client, F75375_REG_VOLT_LOW(nr)); |
| } |
| data->fan_timer = f75375_read8(client, F75375_REG_FAN_TIMER); |
| data->last_limits = jiffies; |
| } |
| |
| /* Measurement registers cache is refreshed after 2 second */ |
| if (time_after(jiffies, data->last_updated + 2 * HZ) |
| || !data->valid) { |
| for (nr = 0; nr < 2; nr++) { |
| data->temp[nr] = |
| f75375_read8(client, F75375_REG_TEMP(nr)); |
| data->fan[nr] = |
| f75375_read16(client, F75375_REG_FAN(nr)); |
| } |
| for (nr = 0; nr < 4; nr++) |
| data->in[nr] = |
| f75375_read8(client, F75375_REG_VOLT(nr)); |
| |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| return data; |
| } |
| |
| static inline u16 rpm_from_reg(u16 reg) |
| { |
| if (reg == 0 || reg == 0xffff) |
| return 0; |
| return (1500000 / reg); |
| } |
| |
| static inline u16 rpm_to_reg(int rpm) |
| { |
| if (rpm < 367 || rpm > 0xffff) |
| return 0xffff; |
| return (1500000 / rpm); |
| } |
| |
| static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtoul(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->fan_min[nr] = rpm_to_reg(val); |
| f75375_write16(client, F75375_REG_FAN_MIN(nr), data->fan_min[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t set_fan_exp(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtoul(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->fan_exp[nr] = rpm_to_reg(val); |
| f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_exp[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtoul(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->pwm[nr] = SENSORS_LIMIT(val, 0, 255); |
| f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t show_pwm_enable(struct device *dev, struct device_attribute |
| *attr, char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm_enable[nr]); |
| } |
| |
| static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) |
| { |
| struct f75375_data *data = i2c_get_clientdata(client); |
| u8 fanmode; |
| |
| if (val < 0 || val > 4) |
| return -EINVAL; |
| |
| fanmode = f75375_read8(client, F75375_REG_FAN_TIMER); |
| fanmode = ~(3 << FAN_CTRL_MODE(nr)); |
| |
| switch (val) { |
| case 0: /* Full speed */ |
| fanmode |= (3 << FAN_CTRL_MODE(nr)); |
| data->pwm[nr] = 255; |
| f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), |
| data->pwm[nr]); |
| break; |
| case 1: /* PWM */ |
| fanmode |= (3 << FAN_CTRL_MODE(nr)); |
| break; |
| case 2: /* AUTOMATIC*/ |
| fanmode |= (2 << FAN_CTRL_MODE(nr)); |
| break; |
| case 3: /* fan speed */ |
| break; |
| } |
| f75375_write8(client, F75375_REG_FAN_TIMER, fanmode); |
| data->pwm_enable[nr] = val; |
| return 0; |
| } |
| |
| static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtoul(buf, NULL, 10); |
| int err = 0; |
| |
| mutex_lock(&data->update_lock); |
| err = set_pwm_enable_direct(client, nr, val); |
| mutex_unlock(&data->update_lock); |
| return err ? err : count; |
| } |
| |
| static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtoul(buf, NULL, 10); |
| u8 conf = 0; |
| |
| if (!(val == 0 || val == 1)) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| conf = f75375_read8(client, F75375_REG_CONFIG1); |
| conf = ~(1 << FAN_CTRL_LINEAR(nr)); |
| |
| if (val == 0) |
| conf |= (1 << FAN_CTRL_LINEAR(nr)) ; |
| |
| f75375_write8(client, F75375_REG_CONFIG1, conf); |
| data->pwm_mode[nr] = val; |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t show_pwm(struct device *dev, struct device_attribute |
| *attr, char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm[nr]); |
| } |
| |
| static ssize_t show_pwm_mode(struct device *dev, struct device_attribute |
| *attr, char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm_mode[nr]); |
| } |
| |
| #define VOLT_FROM_REG(val) ((val) * 8) |
| #define VOLT_TO_REG(val) ((val) / 8) |
| |
| static ssize_t show_in(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in[nr])); |
| } |
| |
| static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_max[nr])); |
| } |
| |
| static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_min[nr])); |
| } |
| |
| static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtoul(buf, NULL, 10); |
| val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff); |
| mutex_lock(&data->update_lock); |
| data->in_max[nr] = val; |
| f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtoul(buf, NULL, 10); |
| val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff); |
| mutex_lock(&data->update_lock); |
| data->in_min[nr] = val; |
| f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| #define TEMP_FROM_REG(val) ((val) * 1000) |
| #define TEMP_TO_REG(val) ((val) / 1000) |
| |
| static ssize_t show_temp(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); |
| } |
| |
| static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); |
| } |
| |
| static ssize_t show_temp_max_hyst(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct f75375_data *data = f75375_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[nr])); |
| } |
| |
| static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtol(buf, NULL, 10); |
| val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127); |
| mutex_lock(&data->update_lock); |
| data->temp_high[nr] = val; |
| f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t set_temp_max_hyst(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int nr = to_sensor_dev_attr(attr)->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct f75375_data *data = i2c_get_clientdata(client); |
| int val = simple_strtol(buf, NULL, 10); |
| val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127); |
| mutex_lock(&data->update_lock); |
| data->temp_max_hyst[nr] = val; |
| f75375_write8(client, F75375_REG_TEMP_HYST(nr), |
| data->temp_max_hyst[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| #define show_fan(thing) \ |
| static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \ |
| char *buf)\ |
| {\ |
| int nr = to_sensor_dev_attr(attr)->index;\ |
| struct f75375_data *data = f75375_update_device(dev); \ |
| return sprintf(buf, "%d\n", rpm_from_reg(data->thing[nr])); \ |
| } |
| |
| show_fan(fan); |
| show_fan(fan_min); |
| show_fan(fan_full); |
| show_fan(fan_exp); |
| |
| static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0); |
| static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR, |
| show_in_max, set_in_max, 0); |
| static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO|S_IWUSR, |
| show_in_min, set_in_min, 0); |
| static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); |
| static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO|S_IWUSR, |
| show_in_max, set_in_max, 1); |
| static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO|S_IWUSR, |
| show_in_min, set_in_min, 1); |
| static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); |
| static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO|S_IWUSR, |
| show_in_max, set_in_max, 2); |
| static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO|S_IWUSR, |
| show_in_min, set_in_min, 2); |
| static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); |
| static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR, |
| show_in_max, set_in_max, 3); |
| static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR, |
| show_in_min, set_in_min, 3); |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); |
| static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR, |
| show_temp_max_hyst, set_temp_max_hyst, 0); |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR, |
| show_temp_max, set_temp_max, 0); |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR, |
| show_temp_max_hyst, set_temp_max_hyst, 1); |
| static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR, |
| show_temp_max, set_temp_max, 1); |
| static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); |
| static SENSOR_DEVICE_ATTR(fan1_full, S_IRUGO, show_fan_full, NULL, 0); |
| static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR, |
| show_fan_min, set_fan_min, 0); |
| static SENSOR_DEVICE_ATTR(fan1_exp, S_IRUGO|S_IWUSR, |
| show_fan_exp, set_fan_exp, 0); |
| static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); |
| static SENSOR_DEVICE_ATTR(fan2_full, S_IRUGO, show_fan_full, NULL, 1); |
| static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR, |
| show_fan_min, set_fan_min, 1); |
| static SENSOR_DEVICE_ATTR(fan2_exp, S_IRUGO|S_IWUSR, |
| show_fan_exp, set_fan_exp, 1); |
| static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, |
| show_pwm, set_pwm, 0); |
| static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, |
| show_pwm_enable, set_pwm_enable, 0); |
| static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, |
| show_pwm_mode, set_pwm_mode, 0); |
| static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, |
| show_pwm, set_pwm, 1); |
| static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, |
| show_pwm_enable, set_pwm_enable, 1); |
| static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, |
| show_pwm_mode, set_pwm_mode, 1); |
| |
| static struct attribute *f75375_attributes[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| &sensor_dev_attr_fan1_full.dev_attr.attr, |
| &sensor_dev_attr_fan1_min.dev_attr.attr, |
| &sensor_dev_attr_fan1_exp.dev_attr.attr, |
| &sensor_dev_attr_fan2_input.dev_attr.attr, |
| &sensor_dev_attr_fan2_full.dev_attr.attr, |
| &sensor_dev_attr_fan2_min.dev_attr.attr, |
| &sensor_dev_attr_fan2_exp.dev_attr.attr, |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &sensor_dev_attr_pwm1_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm1_mode.dev_attr.attr, |
| &sensor_dev_attr_pwm2.dev_attr.attr, |
| &sensor_dev_attr_pwm2_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm2_mode.dev_attr.attr, |
| &sensor_dev_attr_in0_input.dev_attr.attr, |
| &sensor_dev_attr_in0_max.dev_attr.attr, |
| &sensor_dev_attr_in0_min.dev_attr.attr, |
| &sensor_dev_attr_in1_input.dev_attr.attr, |
| &sensor_dev_attr_in1_max.dev_attr.attr, |
| &sensor_dev_attr_in1_min.dev_attr.attr, |
| &sensor_dev_attr_in2_input.dev_attr.attr, |
| &sensor_dev_attr_in2_max.dev_attr.attr, |
| &sensor_dev_attr_in2_min.dev_attr.attr, |
| &sensor_dev_attr_in3_input.dev_attr.attr, |
| &sensor_dev_attr_in3_max.dev_attr.attr, |
| &sensor_dev_attr_in3_min.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group f75375_group = { |
| .attrs = f75375_attributes, |
| }; |
| |
| static void f75375_init(struct i2c_client *client, struct f75375_data *data, |
| struct f75375s_platform_data *f75375s_pdata) |
| { |
| int nr; |
| set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]); |
| set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]); |
| for (nr = 0; nr < 2; nr++) { |
| data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255); |
| f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), |
| data->pwm[nr]); |
| } |
| |
| } |
| |
| static int f75375_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct f75375_data *data; |
| struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data; |
| int err; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -EIO; |
| if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL))) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, data); |
| mutex_init(&data->update_lock); |
| data->kind = id->driver_data; |
| |
| if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group))) |
| goto exit_free; |
| |
| if (data->kind == f75375) { |
| err = sysfs_chmod_file(&client->dev.kobj, |
| &sensor_dev_attr_pwm1_mode.dev_attr.attr, |
| S_IRUGO | S_IWUSR); |
| if (err) |
| goto exit_remove; |
| err = sysfs_chmod_file(&client->dev.kobj, |
| &sensor_dev_attr_pwm2_mode.dev_attr.attr, |
| S_IRUGO | S_IWUSR); |
| if (err) |
| goto exit_remove; |
| } |
| |
| data->hwmon_dev = hwmon_device_register(&client->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| goto exit_remove; |
| } |
| |
| if (f75375s_pdata != NULL) |
| f75375_init(client, data, f75375s_pdata); |
| |
| return 0; |
| |
| exit_remove: |
| sysfs_remove_group(&client->dev.kobj, &f75375_group); |
| exit_free: |
| kfree(data); |
| i2c_set_clientdata(client, NULL); |
| return err; |
| } |
| |
| static int f75375_remove(struct i2c_client *client) |
| { |
| struct f75375_data *data = i2c_get_clientdata(client); |
| hwmon_device_unregister(data->hwmon_dev); |
| sysfs_remove_group(&client->dev.kobj, &f75375_group); |
| kfree(data); |
| i2c_set_clientdata(client, NULL); |
| return 0; |
| } |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int f75375_detect(struct i2c_client *client, int kind, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| u16 vendid, chipid; |
| u8 version; |
| const char *name; |
| |
| vendid = f75375_read16(client, F75375_REG_VENDOR); |
| chipid = f75375_read16(client, F75375_CHIP_ID); |
| if (chipid == 0x0306 && vendid == 0x1934) |
| name = "f75375"; |
| else if (chipid == 0x0204 && vendid == 0x1934) |
| name = "f75373"; |
| else |
| return -ENODEV; |
| |
| version = f75375_read8(client, F75375_REG_VERSION); |
| dev_info(&adapter->dev, "found %s version: %02X\n", name, version); |
| strlcpy(info->type, name, I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int __init sensors_f75375_init(void) |
| { |
| return i2c_add_driver(&f75375_driver); |
| } |
| |
| static void __exit sensors_f75375_exit(void) |
| { |
| i2c_del_driver(&f75375_driver); |
| } |
| |
| MODULE_AUTHOR("Riku Voipio"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver"); |
| |
| module_init(sensors_f75375_init); |
| module_exit(sensors_f75375_exit); |