| /* |
| * Copyright (C) 2005 - 2013 Emulex |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation. The full GNU General |
| * Public License is included in this distribution in the file called COPYING. |
| * |
| * Contact Information: |
| * linux-drivers@emulex.com |
| * |
| * Emulex |
| * 3333 Susan Street |
| * Costa Mesa, CA 92626 |
| */ |
| |
| #include <linux/prefetch.h> |
| #include <linux/module.h> |
| #include "be.h" |
| #include "be_cmds.h" |
| #include <asm/div64.h> |
| #include <linux/aer.h> |
| #include <linux/if_bridge.h> |
| |
| MODULE_VERSION(DRV_VER); |
| MODULE_DEVICE_TABLE(pci, be_dev_ids); |
| MODULE_DESCRIPTION(DRV_DESC " " DRV_VER); |
| MODULE_AUTHOR("Emulex Corporation"); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned int num_vfs; |
| module_param(num_vfs, uint, S_IRUGO); |
| MODULE_PARM_DESC(num_vfs, "Number of PCI VFs to initialize"); |
| |
| static ushort rx_frag_size = 2048; |
| module_param(rx_frag_size, ushort, S_IRUGO); |
| MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data."); |
| |
| static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = { |
| { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) }, |
| { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) }, |
| { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) }, |
| { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) }, |
| { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID3)}, |
| { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID4)}, |
| { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID5)}, |
| { PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID6)}, |
| { 0 } |
| }; |
| MODULE_DEVICE_TABLE(pci, be_dev_ids); |
| /* UE Status Low CSR */ |
| static const char * const ue_status_low_desc[] = { |
| "CEV", |
| "CTX", |
| "DBUF", |
| "ERX", |
| "Host", |
| "MPU", |
| "NDMA", |
| "PTC ", |
| "RDMA ", |
| "RXF ", |
| "RXIPS ", |
| "RXULP0 ", |
| "RXULP1 ", |
| "RXULP2 ", |
| "TIM ", |
| "TPOST ", |
| "TPRE ", |
| "TXIPS ", |
| "TXULP0 ", |
| "TXULP1 ", |
| "UC ", |
| "WDMA ", |
| "TXULP2 ", |
| "HOST1 ", |
| "P0_OB_LINK ", |
| "P1_OB_LINK ", |
| "HOST_GPIO ", |
| "MBOX ", |
| "AXGMAC0", |
| "AXGMAC1", |
| "JTAG", |
| "MPU_INTPEND" |
| }; |
| /* UE Status High CSR */ |
| static const char * const ue_status_hi_desc[] = { |
| "LPCMEMHOST", |
| "MGMT_MAC", |
| "PCS0ONLINE", |
| "MPU_IRAM", |
| "PCS1ONLINE", |
| "PCTL0", |
| "PCTL1", |
| "PMEM", |
| "RR", |
| "TXPB", |
| "RXPP", |
| "XAUI", |
| "TXP", |
| "ARM", |
| "IPC", |
| "HOST2", |
| "HOST3", |
| "HOST4", |
| "HOST5", |
| "HOST6", |
| "HOST7", |
| "HOST8", |
| "HOST9", |
| "NETC", |
| "Unknown", |
| "Unknown", |
| "Unknown", |
| "Unknown", |
| "Unknown", |
| "Unknown", |
| "Unknown", |
| "Unknown" |
| }; |
| |
| /* Is BE in a multi-channel mode */ |
| static inline bool be_is_mc(struct be_adapter *adapter) { |
| return (adapter->function_mode & FLEX10_MODE || |
| adapter->function_mode & VNIC_MODE || |
| adapter->function_mode & UMC_ENABLED); |
| } |
| |
| static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q) |
| { |
| struct be_dma_mem *mem = &q->dma_mem; |
| if (mem->va) { |
| dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va, |
| mem->dma); |
| mem->va = NULL; |
| } |
| } |
| |
| static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q, |
| u16 len, u16 entry_size) |
| { |
| struct be_dma_mem *mem = &q->dma_mem; |
| |
| memset(q, 0, sizeof(*q)); |
| q->len = len; |
| q->entry_size = entry_size; |
| mem->size = len * entry_size; |
| mem->va = dma_zalloc_coherent(&adapter->pdev->dev, mem->size, &mem->dma, |
| GFP_KERNEL); |
| if (!mem->va) |
| return -ENOMEM; |
| return 0; |
| } |
| |
| static void be_reg_intr_set(struct be_adapter *adapter, bool enable) |
| { |
| u32 reg, enabled; |
| |
| pci_read_config_dword(adapter->pdev, PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET, |
| ®); |
| enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; |
| |
| if (!enabled && enable) |
| reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; |
| else if (enabled && !enable) |
| reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; |
| else |
| return; |
| |
| pci_write_config_dword(adapter->pdev, |
| PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET, reg); |
| } |
| |
| static void be_intr_set(struct be_adapter *adapter, bool enable) |
| { |
| int status = 0; |
| |
| /* On lancer interrupts can't be controlled via this register */ |
| if (lancer_chip(adapter)) |
| return; |
| |
| if (adapter->eeh_error) |
| return; |
| |
| status = be_cmd_intr_set(adapter, enable); |
| if (status) |
| be_reg_intr_set(adapter, enable); |
| } |
| |
| static void be_rxq_notify(struct be_adapter *adapter, u16 qid, u16 posted) |
| { |
| u32 val = 0; |
| val |= qid & DB_RQ_RING_ID_MASK; |
| val |= posted << DB_RQ_NUM_POSTED_SHIFT; |
| |
| wmb(); |
| iowrite32(val, adapter->db + DB_RQ_OFFSET); |
| } |
| |
| static void be_txq_notify(struct be_adapter *adapter, struct be_tx_obj *txo, |
| u16 posted) |
| { |
| u32 val = 0; |
| val |= txo->q.id & DB_TXULP_RING_ID_MASK; |
| val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT; |
| |
| wmb(); |
| iowrite32(val, adapter->db + txo->db_offset); |
| } |
| |
| static void be_eq_notify(struct be_adapter *adapter, u16 qid, |
| bool arm, bool clear_int, u16 num_popped) |
| { |
| u32 val = 0; |
| val |= qid & DB_EQ_RING_ID_MASK; |
| val |= ((qid & DB_EQ_RING_ID_EXT_MASK) << |
| DB_EQ_RING_ID_EXT_MASK_SHIFT); |
| |
| if (adapter->eeh_error) |
| return; |
| |
| if (arm) |
| val |= 1 << DB_EQ_REARM_SHIFT; |
| if (clear_int) |
| val |= 1 << DB_EQ_CLR_SHIFT; |
| val |= 1 << DB_EQ_EVNT_SHIFT; |
| val |= num_popped << DB_EQ_NUM_POPPED_SHIFT; |
| iowrite32(val, adapter->db + DB_EQ_OFFSET); |
| } |
| |
| void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped) |
| { |
| u32 val = 0; |
| val |= qid & DB_CQ_RING_ID_MASK; |
| val |= ((qid & DB_CQ_RING_ID_EXT_MASK) << |
| DB_CQ_RING_ID_EXT_MASK_SHIFT); |
| |
| if (adapter->eeh_error) |
| return; |
| |
| if (arm) |
| val |= 1 << DB_CQ_REARM_SHIFT; |
| val |= num_popped << DB_CQ_NUM_POPPED_SHIFT; |
| iowrite32(val, adapter->db + DB_CQ_OFFSET); |
| } |
| |
| static int be_mac_addr_set(struct net_device *netdev, void *p) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct device *dev = &adapter->pdev->dev; |
| struct sockaddr *addr = p; |
| int status; |
| u8 mac[ETH_ALEN]; |
| u32 old_pmac_id = adapter->pmac_id[0], curr_pmac_id = 0; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| /* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT |
| * privilege or if PF did not provision the new MAC address. |
| * On BE3, this cmd will always fail if the VF doesn't have the |
| * FILTMGMT privilege. This failure is OK, only if the PF programmed |
| * the MAC for the VF. |
| */ |
| status = be_cmd_pmac_add(adapter, (u8 *)addr->sa_data, |
| adapter->if_handle, &adapter->pmac_id[0], 0); |
| if (!status) { |
| curr_pmac_id = adapter->pmac_id[0]; |
| |
| /* Delete the old programmed MAC. This call may fail if the |
| * old MAC was already deleted by the PF driver. |
| */ |
| if (adapter->pmac_id[0] != old_pmac_id) |
| be_cmd_pmac_del(adapter, adapter->if_handle, |
| old_pmac_id, 0); |
| } |
| |
| /* Decide if the new MAC is successfully activated only after |
| * querying the FW |
| */ |
| status = be_cmd_get_active_mac(adapter, curr_pmac_id, mac); |
| if (status) |
| goto err; |
| |
| /* The MAC change did not happen, either due to lack of privilege |
| * or PF didn't pre-provision. |
| */ |
| if (memcmp(addr->sa_data, mac, ETH_ALEN)) { |
| status = -EPERM; |
| goto err; |
| } |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| dev_info(dev, "MAC address changed to %pM\n", mac); |
| return 0; |
| err: |
| dev_warn(dev, "MAC address change to %pM failed\n", addr->sa_data); |
| return status; |
| } |
| |
| /* BE2 supports only v0 cmd */ |
| static void *hw_stats_from_cmd(struct be_adapter *adapter) |
| { |
| if (BE2_chip(adapter)) { |
| struct be_cmd_resp_get_stats_v0 *cmd = adapter->stats_cmd.va; |
| |
| return &cmd->hw_stats; |
| } else { |
| struct be_cmd_resp_get_stats_v1 *cmd = adapter->stats_cmd.va; |
| |
| return &cmd->hw_stats; |
| } |
| } |
| |
| /* BE2 supports only v0 cmd */ |
| static void *be_erx_stats_from_cmd(struct be_adapter *adapter) |
| { |
| if (BE2_chip(adapter)) { |
| struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter); |
| |
| return &hw_stats->erx; |
| } else { |
| struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter); |
| |
| return &hw_stats->erx; |
| } |
| } |
| |
| static void populate_be_v0_stats(struct be_adapter *adapter) |
| { |
| struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter); |
| struct be_pmem_stats *pmem_sts = &hw_stats->pmem; |
| struct be_rxf_stats_v0 *rxf_stats = &hw_stats->rxf; |
| struct be_port_rxf_stats_v0 *port_stats = |
| &rxf_stats->port[adapter->port_num]; |
| struct be_drv_stats *drvs = &adapter->drv_stats; |
| |
| be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats)); |
| drvs->rx_pause_frames = port_stats->rx_pause_frames; |
| drvs->rx_crc_errors = port_stats->rx_crc_errors; |
| drvs->rx_control_frames = port_stats->rx_control_frames; |
| drvs->rx_in_range_errors = port_stats->rx_in_range_errors; |
| drvs->rx_frame_too_long = port_stats->rx_frame_too_long; |
| drvs->rx_dropped_runt = port_stats->rx_dropped_runt; |
| drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs; |
| drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs; |
| drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs; |
| drvs->rxpp_fifo_overflow_drop = port_stats->rx_fifo_overflow; |
| drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length; |
| drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small; |
| drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short; |
| drvs->rx_out_range_errors = port_stats->rx_out_range_errors; |
| drvs->rx_input_fifo_overflow_drop = port_stats->rx_input_fifo_overflow; |
| drvs->rx_dropped_header_too_small = |
| port_stats->rx_dropped_header_too_small; |
| drvs->rx_address_filtered = |
| port_stats->rx_address_filtered + |
| port_stats->rx_vlan_filtered; |
| drvs->rx_alignment_symbol_errors = |
| port_stats->rx_alignment_symbol_errors; |
| |
| drvs->tx_pauseframes = port_stats->tx_pauseframes; |
| drvs->tx_controlframes = port_stats->tx_controlframes; |
| |
| if (adapter->port_num) |
| drvs->jabber_events = rxf_stats->port1_jabber_events; |
| else |
| drvs->jabber_events = rxf_stats->port0_jabber_events; |
| drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf; |
| drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr; |
| drvs->forwarded_packets = rxf_stats->forwarded_packets; |
| drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu; |
| drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr; |
| drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags; |
| adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops; |
| } |
| |
| static void populate_be_v1_stats(struct be_adapter *adapter) |
| { |
| struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter); |
| struct be_pmem_stats *pmem_sts = &hw_stats->pmem; |
| struct be_rxf_stats_v1 *rxf_stats = &hw_stats->rxf; |
| struct be_port_rxf_stats_v1 *port_stats = |
| &rxf_stats->port[adapter->port_num]; |
| struct be_drv_stats *drvs = &adapter->drv_stats; |
| |
| be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats)); |
| drvs->pmem_fifo_overflow_drop = port_stats->pmem_fifo_overflow_drop; |
| drvs->rx_priority_pause_frames = port_stats->rx_priority_pause_frames; |
| drvs->rx_pause_frames = port_stats->rx_pause_frames; |
| drvs->rx_crc_errors = port_stats->rx_crc_errors; |
| drvs->rx_control_frames = port_stats->rx_control_frames; |
| drvs->rx_in_range_errors = port_stats->rx_in_range_errors; |
| drvs->rx_frame_too_long = port_stats->rx_frame_too_long; |
| drvs->rx_dropped_runt = port_stats->rx_dropped_runt; |
| drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs; |
| drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs; |
| drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs; |
| drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length; |
| drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small; |
| drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short; |
| drvs->rx_out_range_errors = port_stats->rx_out_range_errors; |
| drvs->rx_dropped_header_too_small = |
| port_stats->rx_dropped_header_too_small; |
| drvs->rx_input_fifo_overflow_drop = |
| port_stats->rx_input_fifo_overflow_drop; |
| drvs->rx_address_filtered = port_stats->rx_address_filtered; |
| drvs->rx_alignment_symbol_errors = |
| port_stats->rx_alignment_symbol_errors; |
| drvs->rxpp_fifo_overflow_drop = port_stats->rxpp_fifo_overflow_drop; |
| drvs->tx_pauseframes = port_stats->tx_pauseframes; |
| drvs->tx_controlframes = port_stats->tx_controlframes; |
| drvs->tx_priority_pauseframes = port_stats->tx_priority_pauseframes; |
| drvs->jabber_events = port_stats->jabber_events; |
| drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf; |
| drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr; |
| drvs->forwarded_packets = rxf_stats->forwarded_packets; |
| drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu; |
| drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr; |
| drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags; |
| adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops; |
| } |
| |
| static void populate_lancer_stats(struct be_adapter *adapter) |
| { |
| |
| struct be_drv_stats *drvs = &adapter->drv_stats; |
| struct lancer_pport_stats *pport_stats = |
| pport_stats_from_cmd(adapter); |
| |
| be_dws_le_to_cpu(pport_stats, sizeof(*pport_stats)); |
| drvs->rx_pause_frames = pport_stats->rx_pause_frames_lo; |
| drvs->rx_crc_errors = pport_stats->rx_crc_errors_lo; |
| drvs->rx_control_frames = pport_stats->rx_control_frames_lo; |
| drvs->rx_in_range_errors = pport_stats->rx_in_range_errors; |
| drvs->rx_frame_too_long = pport_stats->rx_frames_too_long_lo; |
| drvs->rx_dropped_runt = pport_stats->rx_dropped_runt; |
| drvs->rx_ip_checksum_errs = pport_stats->rx_ip_checksum_errors; |
| drvs->rx_tcp_checksum_errs = pport_stats->rx_tcp_checksum_errors; |
| drvs->rx_udp_checksum_errs = pport_stats->rx_udp_checksum_errors; |
| drvs->rx_dropped_tcp_length = |
| pport_stats->rx_dropped_invalid_tcp_length; |
| drvs->rx_dropped_too_small = pport_stats->rx_dropped_too_small; |
| drvs->rx_dropped_too_short = pport_stats->rx_dropped_too_short; |
| drvs->rx_out_range_errors = pport_stats->rx_out_of_range_errors; |
| drvs->rx_dropped_header_too_small = |
| pport_stats->rx_dropped_header_too_small; |
| drvs->rx_input_fifo_overflow_drop = pport_stats->rx_fifo_overflow; |
| drvs->rx_address_filtered = |
| pport_stats->rx_address_filtered + |
| pport_stats->rx_vlan_filtered; |
| drvs->rx_alignment_symbol_errors = pport_stats->rx_symbol_errors_lo; |
| drvs->rxpp_fifo_overflow_drop = pport_stats->rx_fifo_overflow; |
| drvs->tx_pauseframes = pport_stats->tx_pause_frames_lo; |
| drvs->tx_controlframes = pport_stats->tx_control_frames_lo; |
| drvs->jabber_events = pport_stats->rx_jabbers; |
| drvs->forwarded_packets = pport_stats->num_forwards_lo; |
| drvs->rx_drops_mtu = pport_stats->rx_drops_mtu_lo; |
| drvs->rx_drops_too_many_frags = |
| pport_stats->rx_drops_too_many_frags_lo; |
| } |
| |
| static void accumulate_16bit_val(u32 *acc, u16 val) |
| { |
| #define lo(x) (x & 0xFFFF) |
| #define hi(x) (x & 0xFFFF0000) |
| bool wrapped = val < lo(*acc); |
| u32 newacc = hi(*acc) + val; |
| |
| if (wrapped) |
| newacc += 65536; |
| ACCESS_ONCE(*acc) = newacc; |
| } |
| |
| static void populate_erx_stats(struct be_adapter *adapter, |
| struct be_rx_obj *rxo, |
| u32 erx_stat) |
| { |
| if (!BEx_chip(adapter)) |
| rx_stats(rxo)->rx_drops_no_frags = erx_stat; |
| else |
| /* below erx HW counter can actually wrap around after |
| * 65535. Driver accumulates a 32-bit value |
| */ |
| accumulate_16bit_val(&rx_stats(rxo)->rx_drops_no_frags, |
| (u16)erx_stat); |
| } |
| |
| void be_parse_stats(struct be_adapter *adapter) |
| { |
| struct be_erx_stats_v1 *erx = be_erx_stats_from_cmd(adapter); |
| struct be_rx_obj *rxo; |
| int i; |
| u32 erx_stat; |
| |
| if (lancer_chip(adapter)) { |
| populate_lancer_stats(adapter); |
| } else { |
| if (BE2_chip(adapter)) |
| populate_be_v0_stats(adapter); |
| else |
| /* for BE3 and Skyhawk */ |
| populate_be_v1_stats(adapter); |
| |
| /* as erx_v1 is longer than v0, ok to use v1 for v0 access */ |
| for_all_rx_queues(adapter, rxo, i) { |
| erx_stat = erx->rx_drops_no_fragments[rxo->q.id]; |
| populate_erx_stats(adapter, rxo, erx_stat); |
| } |
| } |
| } |
| |
| static struct rtnl_link_stats64 *be_get_stats64(struct net_device *netdev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct be_drv_stats *drvs = &adapter->drv_stats; |
| struct be_rx_obj *rxo; |
| struct be_tx_obj *txo; |
| u64 pkts, bytes; |
| unsigned int start; |
| int i; |
| |
| for_all_rx_queues(adapter, rxo, i) { |
| const struct be_rx_stats *rx_stats = rx_stats(rxo); |
| do { |
| start = u64_stats_fetch_begin_bh(&rx_stats->sync); |
| pkts = rx_stats(rxo)->rx_pkts; |
| bytes = rx_stats(rxo)->rx_bytes; |
| } while (u64_stats_fetch_retry_bh(&rx_stats->sync, start)); |
| stats->rx_packets += pkts; |
| stats->rx_bytes += bytes; |
| stats->multicast += rx_stats(rxo)->rx_mcast_pkts; |
| stats->rx_dropped += rx_stats(rxo)->rx_drops_no_skbs + |
| rx_stats(rxo)->rx_drops_no_frags; |
| } |
| |
| for_all_tx_queues(adapter, txo, i) { |
| const struct be_tx_stats *tx_stats = tx_stats(txo); |
| do { |
| start = u64_stats_fetch_begin_bh(&tx_stats->sync); |
| pkts = tx_stats(txo)->tx_pkts; |
| bytes = tx_stats(txo)->tx_bytes; |
| } while (u64_stats_fetch_retry_bh(&tx_stats->sync, start)); |
| stats->tx_packets += pkts; |
| stats->tx_bytes += bytes; |
| } |
| |
| /* bad pkts received */ |
| stats->rx_errors = drvs->rx_crc_errors + |
| drvs->rx_alignment_symbol_errors + |
| drvs->rx_in_range_errors + |
| drvs->rx_out_range_errors + |
| drvs->rx_frame_too_long + |
| drvs->rx_dropped_too_small + |
| drvs->rx_dropped_too_short + |
| drvs->rx_dropped_header_too_small + |
| drvs->rx_dropped_tcp_length + |
| drvs->rx_dropped_runt; |
| |
| /* detailed rx errors */ |
| stats->rx_length_errors = drvs->rx_in_range_errors + |
| drvs->rx_out_range_errors + |
| drvs->rx_frame_too_long; |
| |
| stats->rx_crc_errors = drvs->rx_crc_errors; |
| |
| /* frame alignment errors */ |
| stats->rx_frame_errors = drvs->rx_alignment_symbol_errors; |
| |
| /* receiver fifo overrun */ |
| /* drops_no_pbuf is no per i/f, it's per BE card */ |
| stats->rx_fifo_errors = drvs->rxpp_fifo_overflow_drop + |
| drvs->rx_input_fifo_overflow_drop + |
| drvs->rx_drops_no_pbuf; |
| return stats; |
| } |
| |
| void be_link_status_update(struct be_adapter *adapter, u8 link_status) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| if (!(adapter->flags & BE_FLAGS_LINK_STATUS_INIT)) { |
| netif_carrier_off(netdev); |
| adapter->flags |= BE_FLAGS_LINK_STATUS_INIT; |
| } |
| |
| if ((link_status & LINK_STATUS_MASK) == LINK_UP) |
| netif_carrier_on(netdev); |
| else |
| netif_carrier_off(netdev); |
| } |
| |
| static void be_tx_stats_update(struct be_tx_obj *txo, |
| u32 wrb_cnt, u32 copied, u32 gso_segs, bool stopped) |
| { |
| struct be_tx_stats *stats = tx_stats(txo); |
| |
| u64_stats_update_begin(&stats->sync); |
| stats->tx_reqs++; |
| stats->tx_wrbs += wrb_cnt; |
| stats->tx_bytes += copied; |
| stats->tx_pkts += (gso_segs ? gso_segs : 1); |
| if (stopped) |
| stats->tx_stops++; |
| u64_stats_update_end(&stats->sync); |
| } |
| |
| /* Determine number of WRB entries needed to xmit data in an skb */ |
| static u32 wrb_cnt_for_skb(struct be_adapter *adapter, struct sk_buff *skb, |
| bool *dummy) |
| { |
| int cnt = (skb->len > skb->data_len); |
| |
| cnt += skb_shinfo(skb)->nr_frags; |
| |
| /* to account for hdr wrb */ |
| cnt++; |
| if (lancer_chip(adapter) || !(cnt & 1)) { |
| *dummy = false; |
| } else { |
| /* add a dummy to make it an even num */ |
| cnt++; |
| *dummy = true; |
| } |
| BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT); |
| return cnt; |
| } |
| |
| static inline void wrb_fill(struct be_eth_wrb *wrb, u64 addr, int len) |
| { |
| wrb->frag_pa_hi = upper_32_bits(addr); |
| wrb->frag_pa_lo = addr & 0xFFFFFFFF; |
| wrb->frag_len = len & ETH_WRB_FRAG_LEN_MASK; |
| wrb->rsvd0 = 0; |
| } |
| |
| static inline u16 be_get_tx_vlan_tag(struct be_adapter *adapter, |
| struct sk_buff *skb) |
| { |
| u8 vlan_prio; |
| u16 vlan_tag; |
| |
| vlan_tag = vlan_tx_tag_get(skb); |
| vlan_prio = (vlan_tag & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT; |
| /* If vlan priority provided by OS is NOT in available bmap */ |
| if (!(adapter->vlan_prio_bmap & (1 << vlan_prio))) |
| vlan_tag = (vlan_tag & ~VLAN_PRIO_MASK) | |
| adapter->recommended_prio; |
| |
| return vlan_tag; |
| } |
| |
| static void wrb_fill_hdr(struct be_adapter *adapter, struct be_eth_hdr_wrb *hdr, |
| struct sk_buff *skb, u32 wrb_cnt, u32 len, bool skip_hw_vlan) |
| { |
| u16 vlan_tag; |
| |
| memset(hdr, 0, sizeof(*hdr)); |
| |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, crc, hdr, 1); |
| |
| if (skb_is_gso(skb)) { |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso, hdr, 1); |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso_mss, |
| hdr, skb_shinfo(skb)->gso_size); |
| if (skb_is_gso_v6(skb) && !lancer_chip(adapter)) |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso6, hdr, 1); |
| } else if (skb->ip_summed == CHECKSUM_PARTIAL) { |
| if (is_tcp_pkt(skb)) |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, tcpcs, hdr, 1); |
| else if (is_udp_pkt(skb)) |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, udpcs, hdr, 1); |
| } |
| |
| if (vlan_tx_tag_present(skb)) { |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan, hdr, 1); |
| vlan_tag = be_get_tx_vlan_tag(adapter, skb); |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan_tag, hdr, vlan_tag); |
| } |
| |
| /* To skip HW VLAN tagging: evt = 1, compl = 0 */ |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, complete, hdr, !skip_hw_vlan); |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, event, hdr, 1); |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, num_wrb, hdr, wrb_cnt); |
| AMAP_SET_BITS(struct amap_eth_hdr_wrb, len, hdr, len); |
| } |
| |
| static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb, |
| bool unmap_single) |
| { |
| dma_addr_t dma; |
| |
| be_dws_le_to_cpu(wrb, sizeof(*wrb)); |
| |
| dma = (u64)wrb->frag_pa_hi << 32 | (u64)wrb->frag_pa_lo; |
| if (wrb->frag_len) { |
| if (unmap_single) |
| dma_unmap_single(dev, dma, wrb->frag_len, |
| DMA_TO_DEVICE); |
| else |
| dma_unmap_page(dev, dma, wrb->frag_len, DMA_TO_DEVICE); |
| } |
| } |
| |
| static int make_tx_wrbs(struct be_adapter *adapter, struct be_queue_info *txq, |
| struct sk_buff *skb, u32 wrb_cnt, bool dummy_wrb, |
| bool skip_hw_vlan) |
| { |
| dma_addr_t busaddr; |
| int i, copied = 0; |
| struct device *dev = &adapter->pdev->dev; |
| struct sk_buff *first_skb = skb; |
| struct be_eth_wrb *wrb; |
| struct be_eth_hdr_wrb *hdr; |
| bool map_single = false; |
| u16 map_head; |
| |
| hdr = queue_head_node(txq); |
| queue_head_inc(txq); |
| map_head = txq->head; |
| |
| if (skb->len > skb->data_len) { |
| int len = skb_headlen(skb); |
| busaddr = dma_map_single(dev, skb->data, len, DMA_TO_DEVICE); |
| if (dma_mapping_error(dev, busaddr)) |
| goto dma_err; |
| map_single = true; |
| wrb = queue_head_node(txq); |
| wrb_fill(wrb, busaddr, len); |
| be_dws_cpu_to_le(wrb, sizeof(*wrb)); |
| queue_head_inc(txq); |
| copied += len; |
| } |
| |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { |
| const struct skb_frag_struct *frag = |
| &skb_shinfo(skb)->frags[i]; |
| busaddr = skb_frag_dma_map(dev, frag, 0, |
| skb_frag_size(frag), DMA_TO_DEVICE); |
| if (dma_mapping_error(dev, busaddr)) |
| goto dma_err; |
| wrb = queue_head_node(txq); |
| wrb_fill(wrb, busaddr, skb_frag_size(frag)); |
| be_dws_cpu_to_le(wrb, sizeof(*wrb)); |
| queue_head_inc(txq); |
| copied += skb_frag_size(frag); |
| } |
| |
| if (dummy_wrb) { |
| wrb = queue_head_node(txq); |
| wrb_fill(wrb, 0, 0); |
| be_dws_cpu_to_le(wrb, sizeof(*wrb)); |
| queue_head_inc(txq); |
| } |
| |
| wrb_fill_hdr(adapter, hdr, first_skb, wrb_cnt, copied, skip_hw_vlan); |
| be_dws_cpu_to_le(hdr, sizeof(*hdr)); |
| |
| return copied; |
| dma_err: |
| txq->head = map_head; |
| while (copied) { |
| wrb = queue_head_node(txq); |
| unmap_tx_frag(dev, wrb, map_single); |
| map_single = false; |
| copied -= wrb->frag_len; |
| queue_head_inc(txq); |
| } |
| return 0; |
| } |
| |
| static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter, |
| struct sk_buff *skb, |
| bool *skip_hw_vlan) |
| { |
| u16 vlan_tag = 0; |
| |
| skb = skb_share_check(skb, GFP_ATOMIC); |
| if (unlikely(!skb)) |
| return skb; |
| |
| if (vlan_tx_tag_present(skb)) |
| vlan_tag = be_get_tx_vlan_tag(adapter, skb); |
| |
| if (qnq_async_evt_rcvd(adapter) && adapter->pvid) { |
| if (!vlan_tag) |
| vlan_tag = adapter->pvid; |
| /* f/w workaround to set skip_hw_vlan = 1, informs the F/W to |
| * skip VLAN insertion |
| */ |
| if (skip_hw_vlan) |
| *skip_hw_vlan = true; |
| } |
| |
| if (vlan_tag) { |
| skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); |
| if (unlikely(!skb)) |
| return skb; |
| skb->vlan_tci = 0; |
| } |
| |
| /* Insert the outer VLAN, if any */ |
| if (adapter->qnq_vid) { |
| vlan_tag = adapter->qnq_vid; |
| skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); |
| if (unlikely(!skb)) |
| return skb; |
| if (skip_hw_vlan) |
| *skip_hw_vlan = true; |
| } |
| |
| return skb; |
| } |
| |
| static bool be_ipv6_exthdr_check(struct sk_buff *skb) |
| { |
| struct ethhdr *eh = (struct ethhdr *)skb->data; |
| u16 offset = ETH_HLEN; |
| |
| if (eh->h_proto == htons(ETH_P_IPV6)) { |
| struct ipv6hdr *ip6h = (struct ipv6hdr *)(skb->data + offset); |
| |
| offset += sizeof(struct ipv6hdr); |
| if (ip6h->nexthdr != NEXTHDR_TCP && |
| ip6h->nexthdr != NEXTHDR_UDP) { |
| struct ipv6_opt_hdr *ehdr = |
| (struct ipv6_opt_hdr *) (skb->data + offset); |
| |
| /* offending pkt: 2nd byte following IPv6 hdr is 0xff */ |
| if (ehdr->hdrlen == 0xff) |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static int be_vlan_tag_tx_chk(struct be_adapter *adapter, struct sk_buff *skb) |
| { |
| return vlan_tx_tag_present(skb) || adapter->pvid || adapter->qnq_vid; |
| } |
| |
| static int be_ipv6_tx_stall_chk(struct be_adapter *adapter, |
| struct sk_buff *skb) |
| { |
| return BE3_chip(adapter) && be_ipv6_exthdr_check(skb); |
| } |
| |
| static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, |
| struct sk_buff *skb, |
| bool *skip_hw_vlan) |
| { |
| struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; |
| unsigned int eth_hdr_len; |
| struct iphdr *ip; |
| |
| /* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or less |
| * may cause a transmit stall on that port. So the work-around is to |
| * pad short packets (<= 32 bytes) to a 36-byte length. |
| */ |
| if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) { |
| if (skb_padto(skb, 36)) |
| goto tx_drop; |
| skb->len = 36; |
| } |
| |
| /* For padded packets, BE HW modifies tot_len field in IP header |
| * incorrecly when VLAN tag is inserted by HW. |
| * For padded packets, Lancer computes incorrect checksum. |
| */ |
| eth_hdr_len = ntohs(skb->protocol) == ETH_P_8021Q ? |
| VLAN_ETH_HLEN : ETH_HLEN; |
| if (skb->len <= 60 && |
| (lancer_chip(adapter) || vlan_tx_tag_present(skb)) && |
| is_ipv4_pkt(skb)) { |
| ip = (struct iphdr *)ip_hdr(skb); |
| pskb_trim(skb, eth_hdr_len + ntohs(ip->tot_len)); |
| } |
| |
| /* If vlan tag is already inlined in the packet, skip HW VLAN |
| * tagging in UMC mode |
| */ |
| if ((adapter->function_mode & UMC_ENABLED) && |
| veh->h_vlan_proto == htons(ETH_P_8021Q)) |
| *skip_hw_vlan = true; |
| |
| /* HW has a bug wherein it will calculate CSUM for VLAN |
| * pkts even though it is disabled. |
| * Manually insert VLAN in pkt. |
| */ |
| if (skb->ip_summed != CHECKSUM_PARTIAL && |
| vlan_tx_tag_present(skb)) { |
| skb = be_insert_vlan_in_pkt(adapter, skb, skip_hw_vlan); |
| if (unlikely(!skb)) |
| goto tx_drop; |
| } |
| |
| /* HW may lockup when VLAN HW tagging is requested on |
| * certain ipv6 packets. Drop such pkts if the HW workaround to |
| * skip HW tagging is not enabled by FW. |
| */ |
| if (unlikely(be_ipv6_tx_stall_chk(adapter, skb) && |
| (adapter->pvid || adapter->qnq_vid) && |
| !qnq_async_evt_rcvd(adapter))) |
| goto tx_drop; |
| |
| /* Manual VLAN tag insertion to prevent: |
| * ASIC lockup when the ASIC inserts VLAN tag into |
| * certain ipv6 packets. Insert VLAN tags in driver, |
| * and set event, completion, vlan bits accordingly |
| * in the Tx WRB. |
| */ |
| if (be_ipv6_tx_stall_chk(adapter, skb) && |
| be_vlan_tag_tx_chk(adapter, skb)) { |
| skb = be_insert_vlan_in_pkt(adapter, skb, skip_hw_vlan); |
| if (unlikely(!skb)) |
| goto tx_drop; |
| } |
| |
| return skb; |
| tx_drop: |
| dev_kfree_skb_any(skb); |
| return NULL; |
| } |
| |
| static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct be_tx_obj *txo = &adapter->tx_obj[skb_get_queue_mapping(skb)]; |
| struct be_queue_info *txq = &txo->q; |
| bool dummy_wrb, stopped = false; |
| u32 wrb_cnt = 0, copied = 0; |
| bool skip_hw_vlan = false; |
| u32 start = txq->head; |
| |
| skb = be_xmit_workarounds(adapter, skb, &skip_hw_vlan); |
| if (!skb) |
| return NETDEV_TX_OK; |
| |
| wrb_cnt = wrb_cnt_for_skb(adapter, skb, &dummy_wrb); |
| |
| copied = make_tx_wrbs(adapter, txq, skb, wrb_cnt, dummy_wrb, |
| skip_hw_vlan); |
| if (copied) { |
| int gso_segs = skb_shinfo(skb)->gso_segs; |
| |
| /* record the sent skb in the sent_skb table */ |
| BUG_ON(txo->sent_skb_list[start]); |
| txo->sent_skb_list[start] = skb; |
| |
| /* Ensure txq has space for the next skb; Else stop the queue |
| * *BEFORE* ringing the tx doorbell, so that we serialze the |
| * tx compls of the current transmit which'll wake up the queue |
| */ |
| atomic_add(wrb_cnt, &txq->used); |
| if ((BE_MAX_TX_FRAG_COUNT + atomic_read(&txq->used)) >= |
| txq->len) { |
| netif_stop_subqueue(netdev, skb_get_queue_mapping(skb)); |
| stopped = true; |
| } |
| |
| be_txq_notify(adapter, txo, wrb_cnt); |
| |
| be_tx_stats_update(txo, wrb_cnt, copied, gso_segs, stopped); |
| } else { |
| txq->head = start; |
| dev_kfree_skb_any(skb); |
| } |
| return NETDEV_TX_OK; |
| } |
| |
| static int be_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| if (new_mtu < BE_MIN_MTU || |
| new_mtu > (BE_MAX_JUMBO_FRAME_SIZE - |
| (ETH_HLEN + ETH_FCS_LEN))) { |
| dev_info(&adapter->pdev->dev, |
| "MTU must be between %d and %d bytes\n", |
| BE_MIN_MTU, |
| (BE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN))); |
| return -EINVAL; |
| } |
| dev_info(&adapter->pdev->dev, "MTU changed from %d to %d bytes\n", |
| netdev->mtu, new_mtu); |
| netdev->mtu = new_mtu; |
| return 0; |
| } |
| |
| /* |
| * A max of 64 (BE_NUM_VLANS_SUPPORTED) vlans can be configured in BE. |
| * If the user configures more, place BE in vlan promiscuous mode. |
| */ |
| static int be_vid_config(struct be_adapter *adapter) |
| { |
| u16 vids[BE_NUM_VLANS_SUPPORTED]; |
| u16 num = 0, i; |
| int status = 0; |
| |
| /* No need to further configure vids if in promiscuous mode */ |
| if (adapter->promiscuous) |
| return 0; |
| |
| if (adapter->vlans_added > be_max_vlans(adapter)) |
| goto set_vlan_promisc; |
| |
| /* Construct VLAN Table to give to HW */ |
| for (i = 0; i < VLAN_N_VID; i++) |
| if (adapter->vlan_tag[i]) |
| vids[num++] = cpu_to_le16(i); |
| |
| status = be_cmd_vlan_config(adapter, adapter->if_handle, |
| vids, num, 1, 0); |
| |
| if (status) { |
| /* Set to VLAN promisc mode as setting VLAN filter failed */ |
| if (status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES) |
| goto set_vlan_promisc; |
| dev_err(&adapter->pdev->dev, |
| "Setting HW VLAN filtering failed.\n"); |
| } else { |
| if (adapter->flags & BE_FLAGS_VLAN_PROMISC) { |
| /* hw VLAN filtering re-enabled. */ |
| status = be_cmd_rx_filter(adapter, |
| BE_FLAGS_VLAN_PROMISC, OFF); |
| if (!status) { |
| dev_info(&adapter->pdev->dev, |
| "Disabling VLAN Promiscuous mode.\n"); |
| adapter->flags &= ~BE_FLAGS_VLAN_PROMISC; |
| dev_info(&adapter->pdev->dev, |
| "Re-Enabling HW VLAN filtering\n"); |
| } |
| } |
| } |
| |
| return status; |
| |
| set_vlan_promisc: |
| dev_warn(&adapter->pdev->dev, "Exhausted VLAN HW filters.\n"); |
| |
| status = be_cmd_rx_filter(adapter, BE_FLAGS_VLAN_PROMISC, ON); |
| if (!status) { |
| dev_info(&adapter->pdev->dev, "Enable VLAN Promiscuous mode\n"); |
| dev_info(&adapter->pdev->dev, "Disabling HW VLAN filtering\n"); |
| adapter->flags |= BE_FLAGS_VLAN_PROMISC; |
| } else |
| dev_err(&adapter->pdev->dev, |
| "Failed to enable VLAN Promiscuous mode.\n"); |
| return status; |
| } |
| |
| static int be_vlan_add_vid(struct net_device *netdev, __be16 proto, u16 vid) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| int status = 0; |
| |
| |
| /* Packets with VID 0 are always received by Lancer by default */ |
| if (lancer_chip(adapter) && vid == 0) |
| goto ret; |
| |
| adapter->vlan_tag[vid] = 1; |
| if (adapter->vlans_added <= (be_max_vlans(adapter) + 1)) |
| status = be_vid_config(adapter); |
| |
| if (!status) |
| adapter->vlans_added++; |
| else |
| adapter->vlan_tag[vid] = 0; |
| ret: |
| return status; |
| } |
| |
| static int be_vlan_rem_vid(struct net_device *netdev, __be16 proto, u16 vid) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| int status = 0; |
| |
| /* Packets with VID 0 are always received by Lancer by default */ |
| if (lancer_chip(adapter) && vid == 0) |
| goto ret; |
| |
| adapter->vlan_tag[vid] = 0; |
| if (adapter->vlans_added <= be_max_vlans(adapter)) |
| status = be_vid_config(adapter); |
| |
| if (!status) |
| adapter->vlans_added--; |
| else |
| adapter->vlan_tag[vid] = 1; |
| ret: |
| return status; |
| } |
| |
| static void be_set_rx_mode(struct net_device *netdev) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| int status; |
| |
| if (netdev->flags & IFF_PROMISC) { |
| be_cmd_rx_filter(adapter, IFF_PROMISC, ON); |
| adapter->promiscuous = true; |
| goto done; |
| } |
| |
| /* BE was previously in promiscuous mode; disable it */ |
| if (adapter->promiscuous) { |
| adapter->promiscuous = false; |
| be_cmd_rx_filter(adapter, IFF_PROMISC, OFF); |
| |
| if (adapter->vlans_added) |
| be_vid_config(adapter); |
| } |
| |
| /* Enable multicast promisc if num configured exceeds what we support */ |
| if (netdev->flags & IFF_ALLMULTI || |
| netdev_mc_count(netdev) > be_max_mc(adapter)) { |
| be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON); |
| goto done; |
| } |
| |
| if (netdev_uc_count(netdev) != adapter->uc_macs) { |
| struct netdev_hw_addr *ha; |
| int i = 1; /* First slot is claimed by the Primary MAC */ |
| |
| for (; adapter->uc_macs > 0; adapter->uc_macs--, i++) { |
| be_cmd_pmac_del(adapter, adapter->if_handle, |
| adapter->pmac_id[i], 0); |
| } |
| |
| if (netdev_uc_count(netdev) > be_max_uc(adapter)) { |
| be_cmd_rx_filter(adapter, IFF_PROMISC, ON); |
| adapter->promiscuous = true; |
| goto done; |
| } |
| |
| netdev_for_each_uc_addr(ha, adapter->netdev) { |
| adapter->uc_macs++; /* First slot is for Primary MAC */ |
| be_cmd_pmac_add(adapter, (u8 *)ha->addr, |
| adapter->if_handle, |
| &adapter->pmac_id[adapter->uc_macs], 0); |
| } |
| } |
| |
| status = be_cmd_rx_filter(adapter, IFF_MULTICAST, ON); |
| |
| /* Set to MCAST promisc mode if setting MULTICAST address fails */ |
| if (status) { |
| dev_info(&adapter->pdev->dev, "Exhausted multicast HW filters.\n"); |
| dev_info(&adapter->pdev->dev, "Disabling HW multicast filtering.\n"); |
| be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON); |
| } |
| done: |
| return; |
| } |
| |
| static int be_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; |
| int status; |
| |
| if (!sriov_enabled(adapter)) |
| return -EPERM; |
| |
| if (!is_valid_ether_addr(mac) || vf >= adapter->num_vfs) |
| return -EINVAL; |
| |
| if (BEx_chip(adapter)) { |
| be_cmd_pmac_del(adapter, vf_cfg->if_handle, vf_cfg->pmac_id, |
| vf + 1); |
| |
| status = be_cmd_pmac_add(adapter, mac, vf_cfg->if_handle, |
| &vf_cfg->pmac_id, vf + 1); |
| } else { |
| status = be_cmd_set_mac(adapter, mac, vf_cfg->if_handle, |
| vf + 1); |
| } |
| |
| if (status) |
| dev_err(&adapter->pdev->dev, "MAC %pM set on VF %d Failed\n", |
| mac, vf); |
| else |
| memcpy(vf_cfg->mac_addr, mac, ETH_ALEN); |
| |
| return status; |
| } |
| |
| static int be_get_vf_config(struct net_device *netdev, int vf, |
| struct ifla_vf_info *vi) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; |
| |
| if (!sriov_enabled(adapter)) |
| return -EPERM; |
| |
| if (vf >= adapter->num_vfs) |
| return -EINVAL; |
| |
| vi->vf = vf; |
| vi->tx_rate = vf_cfg->tx_rate; |
| vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK; |
| vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT; |
| memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN); |
| |
| return 0; |
| } |
| |
| static int be_set_vf_vlan(struct net_device *netdev, |
| int vf, u16 vlan, u8 qos) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; |
| int status = 0; |
| |
| if (!sriov_enabled(adapter)) |
| return -EPERM; |
| |
| if (vf >= adapter->num_vfs || vlan > 4095 || qos > 7) |
| return -EINVAL; |
| |
| if (vlan || qos) { |
| vlan |= qos << VLAN_PRIO_SHIFT; |
| if (vf_cfg->vlan_tag != vlan) { |
| /* If this is new value, program it. Else skip. */ |
| vf_cfg->vlan_tag = vlan; |
| status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, |
| vf_cfg->if_handle, 0); |
| } |
| } else { |
| /* Reset Transparent Vlan Tagging. */ |
| vf_cfg->vlan_tag = 0; |
| vlan = vf_cfg->def_vid; |
| status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, |
| vf_cfg->if_handle, 0); |
| } |
| |
| |
| if (status) |
| dev_info(&adapter->pdev->dev, |
| "VLAN %d config on VF %d failed\n", vlan, vf); |
| return status; |
| } |
| |
| static int be_set_vf_tx_rate(struct net_device *netdev, |
| int vf, int rate) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| int status = 0; |
| |
| if (!sriov_enabled(adapter)) |
| return -EPERM; |
| |
| if (vf >= adapter->num_vfs) |
| return -EINVAL; |
| |
| if (rate < 100 || rate > 10000) { |
| dev_err(&adapter->pdev->dev, |
| "tx rate must be between 100 and 10000 Mbps\n"); |
| return -EINVAL; |
| } |
| |
| if (lancer_chip(adapter)) |
| status = be_cmd_set_profile_config(adapter, rate / 10, vf + 1); |
| else |
| status = be_cmd_set_qos(adapter, rate / 10, vf + 1); |
| |
| if (status) |
| dev_err(&adapter->pdev->dev, |
| "tx rate %d on VF %d failed\n", rate, vf); |
| else |
| adapter->vf_cfg[vf].tx_rate = rate; |
| return status; |
| } |
| |
| static void be_eqd_update(struct be_adapter *adapter, struct be_eq_obj *eqo) |
| { |
| struct be_rx_stats *stats = rx_stats(&adapter->rx_obj[eqo->idx]); |
| ulong now = jiffies; |
| ulong delta = now - stats->rx_jiffies; |
| u64 pkts; |
| unsigned int start, eqd; |
| |
| if (!eqo->enable_aic) { |
| eqd = eqo->eqd; |
| goto modify_eqd; |
| } |
| |
| if (eqo->idx >= adapter->num_rx_qs) |
| return; |
| |
| stats = rx_stats(&adapter->rx_obj[eqo->idx]); |
| |
| /* Wrapped around */ |
| if (time_before(now, stats->rx_jiffies)) { |
| stats->rx_jiffies = now; |
| return; |
| } |
| |
| /* Update once a second */ |
| if (delta < HZ) |
| return; |
| |
| do { |
| start = u64_stats_fetch_begin_bh(&stats->sync); |
| pkts = stats->rx_pkts; |
| } while (u64_stats_fetch_retry_bh(&stats->sync, start)); |
| |
| stats->rx_pps = (unsigned long)(pkts - stats->rx_pkts_prev) / (delta / HZ); |
| stats->rx_pkts_prev = pkts; |
| stats->rx_jiffies = now; |
| eqd = (stats->rx_pps / 110000) << 3; |
| eqd = min(eqd, eqo->max_eqd); |
| eqd = max(eqd, eqo->min_eqd); |
| if (eqd < 10) |
| eqd = 0; |
| |
| modify_eqd: |
| if (eqd != eqo->cur_eqd) { |
| be_cmd_modify_eqd(adapter, eqo->q.id, eqd); |
| eqo->cur_eqd = eqd; |
| } |
| } |
| |
| static void be_rx_stats_update(struct be_rx_obj *rxo, |
| struct be_rx_compl_info *rxcp) |
| { |
| struct be_rx_stats *stats = rx_stats(rxo); |
| |
| u64_stats_update_begin(&stats->sync); |
| stats->rx_compl++; |
| stats->rx_bytes += rxcp->pkt_size; |
| stats->rx_pkts++; |
| if (rxcp->pkt_type == BE_MULTICAST_PACKET) |
| stats->rx_mcast_pkts++; |
| if (rxcp->err) |
| stats->rx_compl_err++; |
| u64_stats_update_end(&stats->sync); |
| } |
| |
| static inline bool csum_passed(struct be_rx_compl_info *rxcp) |
| { |
| /* L4 checksum is not reliable for non TCP/UDP packets. |
| * Also ignore ipcksm for ipv6 pkts */ |
| return (rxcp->tcpf || rxcp->udpf) && rxcp->l4_csum && |
| (rxcp->ip_csum || rxcp->ipv6); |
| } |
| |
| static struct be_rx_page_info *get_rx_page_info(struct be_rx_obj *rxo, |
| u16 frag_idx) |
| { |
| struct be_adapter *adapter = rxo->adapter; |
| struct be_rx_page_info *rx_page_info; |
| struct be_queue_info *rxq = &rxo->q; |
| |
| rx_page_info = &rxo->page_info_tbl[frag_idx]; |
| BUG_ON(!rx_page_info->page); |
| |
| if (rx_page_info->last_page_user) { |
| dma_unmap_page(&adapter->pdev->dev, |
| dma_unmap_addr(rx_page_info, bus), |
| adapter->big_page_size, DMA_FROM_DEVICE); |
| rx_page_info->last_page_user = false; |
| } |
| |
| atomic_dec(&rxq->used); |
| return rx_page_info; |
| } |
| |
| /* Throwaway the data in the Rx completion */ |
| static void be_rx_compl_discard(struct be_rx_obj *rxo, |
| struct be_rx_compl_info *rxcp) |
| { |
| struct be_queue_info *rxq = &rxo->q; |
| struct be_rx_page_info *page_info; |
| u16 i, num_rcvd = rxcp->num_rcvd; |
| |
| for (i = 0; i < num_rcvd; i++) { |
| page_info = get_rx_page_info(rxo, rxcp->rxq_idx); |
| put_page(page_info->page); |
| memset(page_info, 0, sizeof(*page_info)); |
| index_inc(&rxcp->rxq_idx, rxq->len); |
| } |
| } |
| |
| /* |
| * skb_fill_rx_data forms a complete skb for an ether frame |
| * indicated by rxcp. |
| */ |
| static void skb_fill_rx_data(struct be_rx_obj *rxo, struct sk_buff *skb, |
| struct be_rx_compl_info *rxcp) |
| { |
| struct be_queue_info *rxq = &rxo->q; |
| struct be_rx_page_info *page_info; |
| u16 i, j; |
| u16 hdr_len, curr_frag_len, remaining; |
| u8 *start; |
| |
| page_info = get_rx_page_info(rxo, rxcp->rxq_idx); |
| start = page_address(page_info->page) + page_info->page_offset; |
| prefetch(start); |
| |
| /* Copy data in the first descriptor of this completion */ |
| curr_frag_len = min(rxcp->pkt_size, rx_frag_size); |
| |
| skb->len = curr_frag_len; |
| if (curr_frag_len <= BE_HDR_LEN) { /* tiny packet */ |
| memcpy(skb->data, start, curr_frag_len); |
| /* Complete packet has now been moved to data */ |
| put_page(page_info->page); |
| skb->data_len = 0; |
| skb->tail += curr_frag_len; |
| } else { |
| hdr_len = ETH_HLEN; |
| memcpy(skb->data, start, hdr_len); |
| skb_shinfo(skb)->nr_frags = 1; |
| skb_frag_set_page(skb, 0, page_info->page); |
| skb_shinfo(skb)->frags[0].page_offset = |
| page_info->page_offset + hdr_len; |
| skb_frag_size_set(&skb_shinfo(skb)->frags[0], curr_frag_len - hdr_len); |
| skb->data_len = curr_frag_len - hdr_len; |
| skb->truesize += rx_frag_size; |
| skb->tail += hdr_len; |
| } |
| page_info->page = NULL; |
| |
| if (rxcp->pkt_size <= rx_frag_size) { |
| BUG_ON(rxcp->num_rcvd != 1); |
| return; |
| } |
| |
| /* More frags present for this completion */ |
| index_inc(&rxcp->rxq_idx, rxq->len); |
| remaining = rxcp->pkt_size - curr_frag_len; |
| for (i = 1, j = 0; i < rxcp->num_rcvd; i++) { |
| page_info = get_rx_page_info(rxo, rxcp->rxq_idx); |
| curr_frag_len = min(remaining, rx_frag_size); |
| |
| /* Coalesce all frags from the same physical page in one slot */ |
| if (page_info->page_offset == 0) { |
| /* Fresh page */ |
| j++; |
| skb_frag_set_page(skb, j, page_info->page); |
| skb_shinfo(skb)->frags[j].page_offset = |
| page_info->page_offset; |
| skb_frag_size_set(&skb_shinfo(skb)->frags[j], 0); |
| skb_shinfo(skb)->nr_frags++; |
| } else { |
| put_page(page_info->page); |
| } |
| |
| skb_frag_size_add(&skb_shinfo(skb)->frags[j], curr_frag_len); |
| skb->len += curr_frag_len; |
| skb->data_len += curr_frag_len; |
| skb->truesize += rx_frag_size; |
| remaining -= curr_frag_len; |
| index_inc(&rxcp->rxq_idx, rxq->len); |
| page_info->page = NULL; |
| } |
| BUG_ON(j > MAX_SKB_FRAGS); |
| } |
| |
| /* Process the RX completion indicated by rxcp when GRO is disabled */ |
| static void be_rx_compl_process(struct be_rx_obj *rxo, |
| struct be_rx_compl_info *rxcp) |
| { |
| struct be_adapter *adapter = rxo->adapter; |
| struct net_device *netdev = adapter->netdev; |
| struct sk_buff *skb; |
| |
| skb = netdev_alloc_skb_ip_align(netdev, BE_RX_SKB_ALLOC_SIZE); |
| if (unlikely(!skb)) { |
| rx_stats(rxo)->rx_drops_no_skbs++; |
| be_rx_compl_discard(rxo, rxcp); |
| return; |
| } |
| |
| skb_fill_rx_data(rxo, skb, rxcp); |
| |
| if (likely((netdev->features & NETIF_F_RXCSUM) && csum_passed(rxcp))) |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| else |
| skb_checksum_none_assert(skb); |
| |
| skb->protocol = eth_type_trans(skb, netdev); |
| skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]); |
| if (netdev->features & NETIF_F_RXHASH) |
| skb->rxhash = rxcp->rss_hash; |
| |
| |
| if (rxcp->vlanf) |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rxcp->vlan_tag); |
| |
| netif_receive_skb(skb); |
| } |
| |
| /* Process the RX completion indicated by rxcp when GRO is enabled */ |
| static void be_rx_compl_process_gro(struct be_rx_obj *rxo, |
| struct napi_struct *napi, |
| struct be_rx_compl_info *rxcp) |
| { |
| struct be_adapter *adapter = rxo->adapter; |
| struct be_rx_page_info *page_info; |
| struct sk_buff *skb = NULL; |
| struct be_queue_info *rxq = &rxo->q; |
| u16 remaining, curr_frag_len; |
| u16 i, j; |
| |
| skb = napi_get_frags(napi); |
| if (!skb) { |
| be_rx_compl_discard(rxo, rxcp); |
| return; |
| } |
| |
| remaining = rxcp->pkt_size; |
| for (i = 0, j = -1; i < rxcp->num_rcvd; i++) { |
| page_info = get_rx_page_info(rxo, rxcp->rxq_idx); |
| |
| curr_frag_len = min(remaining, rx_frag_size); |
| |
| /* Coalesce all frags from the same physical page in one slot */ |
| if (i == 0 || page_info->page_offset == 0) { |
| /* First frag or Fresh page */ |
| j++; |
| skb_frag_set_page(skb, j, page_info->page); |
| skb_shinfo(skb)->frags[j].page_offset = |
| page_info->page_offset; |
| skb_frag_size_set(&skb_shinfo(skb)->frags[j], 0); |
| } else { |
| put_page(page_info->page); |
| } |
| skb_frag_size_add(&skb_shinfo(skb)->frags[j], curr_frag_len); |
| skb->truesize += rx_frag_size; |
| remaining -= curr_frag_len; |
| index_inc(&rxcp->rxq_idx, rxq->len); |
| memset(page_info, 0, sizeof(*page_info)); |
| } |
| BUG_ON(j > MAX_SKB_FRAGS); |
| |
| skb_shinfo(skb)->nr_frags = j + 1; |
| skb->len = rxcp->pkt_size; |
| skb->data_len = rxcp->pkt_size; |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]); |
| if (adapter->netdev->features & NETIF_F_RXHASH) |
| skb->rxhash = rxcp->rss_hash; |
| |
| if (rxcp->vlanf) |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rxcp->vlan_tag); |
| |
| napi_gro_frags(napi); |
| } |
| |
| static void be_parse_rx_compl_v1(struct be_eth_rx_compl *compl, |
| struct be_rx_compl_info *rxcp) |
| { |
| rxcp->pkt_size = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v1, pktsize, compl); |
| rxcp->vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtp, compl); |
| rxcp->err = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, err, compl); |
| rxcp->tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, tcpf, compl); |
| rxcp->udpf = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, udpf, compl); |
| rxcp->ip_csum = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v1, ipcksm, compl); |
| rxcp->l4_csum = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v1, l4_cksm, compl); |
| rxcp->ipv6 = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v1, ip_version, compl); |
| rxcp->rxq_idx = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v1, fragndx, compl); |
| rxcp->num_rcvd = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v1, numfrags, compl); |
| rxcp->pkt_type = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v1, cast_enc, compl); |
| rxcp->rss_hash = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v1, rsshash, compl); |
| if (rxcp->vlanf) { |
| rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtm, |
| compl); |
| rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vlan_tag, |
| compl); |
| } |
| rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, port, compl); |
| } |
| |
| static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl, |
| struct be_rx_compl_info *rxcp) |
| { |
| rxcp->pkt_size = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v0, pktsize, compl); |
| rxcp->vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtp, compl); |
| rxcp->err = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, err, compl); |
| rxcp->tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, tcpf, compl); |
| rxcp->udpf = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, udpf, compl); |
| rxcp->ip_csum = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v0, ipcksm, compl); |
| rxcp->l4_csum = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v0, l4_cksm, compl); |
| rxcp->ipv6 = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v0, ip_version, compl); |
| rxcp->rxq_idx = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v0, fragndx, compl); |
| rxcp->num_rcvd = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v0, numfrags, compl); |
| rxcp->pkt_type = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v0, cast_enc, compl); |
| rxcp->rss_hash = |
| AMAP_GET_BITS(struct amap_eth_rx_compl_v0, rsshash, compl); |
| if (rxcp->vlanf) { |
| rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtm, |
| compl); |
| rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vlan_tag, |
| compl); |
| } |
| rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, port, compl); |
| rxcp->ip_frag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, |
| ip_frag, compl); |
| } |
| |
| static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) |
| { |
| struct be_eth_rx_compl *compl = queue_tail_node(&rxo->cq); |
| struct be_rx_compl_info *rxcp = &rxo->rxcp; |
| struct be_adapter *adapter = rxo->adapter; |
| |
| /* For checking the valid bit it is Ok to use either definition as the |
| * valid bit is at the same position in both v0 and v1 Rx compl */ |
| if (compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] == 0) |
| return NULL; |
| |
| rmb(); |
| be_dws_le_to_cpu(compl, sizeof(*compl)); |
| |
| if (adapter->be3_native) |
| be_parse_rx_compl_v1(compl, rxcp); |
| else |
| be_parse_rx_compl_v0(compl, rxcp); |
| |
| if (rxcp->ip_frag) |
| rxcp->l4_csum = 0; |
| |
| if (rxcp->vlanf) { |
| /* vlanf could be wrongly set in some cards. |
| * ignore if vtm is not set */ |
| if ((adapter->function_mode & FLEX10_MODE) && !rxcp->vtm) |
| rxcp->vlanf = 0; |
| |
| if (!lancer_chip(adapter)) |
| rxcp->vlan_tag = swab16(rxcp->vlan_tag); |
| |
| if (adapter->pvid == (rxcp->vlan_tag & VLAN_VID_MASK) && |
| !adapter->vlan_tag[rxcp->vlan_tag]) |
| rxcp->vlanf = 0; |
| } |
| |
| /* As the compl has been parsed, reset it; we wont touch it again */ |
| compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] = 0; |
| |
| queue_tail_inc(&rxo->cq); |
| return rxcp; |
| } |
| |
| static inline struct page *be_alloc_pages(u32 size, gfp_t gfp) |
| { |
| u32 order = get_order(size); |
| |
| if (order > 0) |
| gfp |= __GFP_COMP; |
| return alloc_pages(gfp, order); |
| } |
| |
| /* |
| * Allocate a page, split it to fragments of size rx_frag_size and post as |
| * receive buffers to BE |
| */ |
| static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp) |
| { |
| struct be_adapter *adapter = rxo->adapter; |
| struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL; |
| struct be_queue_info *rxq = &rxo->q; |
| struct page *pagep = NULL; |
| struct be_eth_rx_d *rxd; |
| u64 page_dmaaddr = 0, frag_dmaaddr; |
| u32 posted, page_offset = 0; |
| |
| page_info = &rxo->page_info_tbl[rxq->head]; |
| for (posted = 0; posted < MAX_RX_POST && !page_info->page; posted++) { |
| if (!pagep) { |
| pagep = be_alloc_pages(adapter->big_page_size, gfp); |
| if (unlikely(!pagep)) { |
| rx_stats(rxo)->rx_post_fail++; |
| break; |
| } |
| page_dmaaddr = dma_map_page(&adapter->pdev->dev, pagep, |
| 0, adapter->big_page_size, |
| DMA_FROM_DEVICE); |
| page_info->page_offset = 0; |
| } else { |
| get_page(pagep); |
| page_info->page_offset = page_offset + rx_frag_size; |
| } |
| page_offset = page_info->page_offset; |
| page_info->page = pagep; |
| dma_unmap_addr_set(page_info, bus, page_dmaaddr); |
| frag_dmaaddr = page_dmaaddr + page_info->page_offset; |
| |
| rxd = queue_head_node(rxq); |
| rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF); |
| rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr)); |
| |
| /* Any space left in the current big page for another frag? */ |
| if ((page_offset + rx_frag_size + rx_frag_size) > |
| adapter->big_page_size) { |
| pagep = NULL; |
| page_info->last_page_user = true; |
| } |
| |
| prev_page_info = page_info; |
| queue_head_inc(rxq); |
| page_info = &rxo->page_info_tbl[rxq->head]; |
| } |
| if (pagep) |
| prev_page_info->last_page_user = true; |
| |
| if (posted) { |
| atomic_add(posted, &rxq->used); |
| be_rxq_notify(adapter, rxq->id, posted); |
| } else if (atomic_read(&rxq->used) == 0) { |
| /* Let be_worker replenish when memory is available */ |
| rxo->rx_post_starved = true; |
| } |
| } |
| |
| static struct be_eth_tx_compl *be_tx_compl_get(struct be_queue_info *tx_cq) |
| { |
| struct be_eth_tx_compl *txcp = queue_tail_node(tx_cq); |
| |
| if (txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0) |
| return NULL; |
| |
| rmb(); |
| be_dws_le_to_cpu(txcp, sizeof(*txcp)); |
| |
| txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0; |
| |
| queue_tail_inc(tx_cq); |
| return txcp; |
| } |
| |
| static u16 be_tx_compl_process(struct be_adapter *adapter, |
| struct be_tx_obj *txo, u16 last_index) |
| { |
| struct be_queue_info *txq = &txo->q; |
| struct be_eth_wrb *wrb; |
| struct sk_buff **sent_skbs = txo->sent_skb_list; |
| struct sk_buff *sent_skb; |
| u16 cur_index, num_wrbs = 1; /* account for hdr wrb */ |
| bool unmap_skb_hdr = true; |
| |
| sent_skb = sent_skbs[txq->tail]; |
| BUG_ON(!sent_skb); |
| sent_skbs[txq->tail] = NULL; |
| |
| /* skip header wrb */ |
| queue_tail_inc(txq); |
| |
| do { |
| cur_index = txq->tail; |
| wrb = queue_tail_node(txq); |
| unmap_tx_frag(&adapter->pdev->dev, wrb, |
| (unmap_skb_hdr && skb_headlen(sent_skb))); |
| unmap_skb_hdr = false; |
| |
| num_wrbs++; |
| queue_tail_inc(txq); |
| } while (cur_index != last_index); |
| |
| kfree_skb(sent_skb); |
| return num_wrbs; |
| } |
| |
| /* Return the number of events in the event queue */ |
| static inline int events_get(struct be_eq_obj *eqo) |
| { |
| struct be_eq_entry *eqe; |
| int num = 0; |
| |
| do { |
| eqe = queue_tail_node(&eqo->q); |
| if (eqe->evt == 0) |
| break; |
| |
| rmb(); |
| eqe->evt = 0; |
| num++; |
| queue_tail_inc(&eqo->q); |
| } while (true); |
| |
| return num; |
| } |
| |
| /* Leaves the EQ is disarmed state */ |
| static void be_eq_clean(struct be_eq_obj *eqo) |
| { |
| int num = events_get(eqo); |
| |
| be_eq_notify(eqo->adapter, eqo->q.id, false, true, num); |
| } |
| |
| static void be_rx_cq_clean(struct be_rx_obj *rxo) |
| { |
| struct be_rx_page_info *page_info; |
| struct be_queue_info *rxq = &rxo->q; |
| struct be_queue_info *rx_cq = &rxo->cq; |
| struct be_rx_compl_info *rxcp; |
| struct be_adapter *adapter = rxo->adapter; |
| int flush_wait = 0; |
| u16 tail; |
| |
| /* Consume pending rx completions. |
| * Wait for the flush completion (identified by zero num_rcvd) |
| * to arrive. Notify CQ even when there are no more CQ entries |
| * for HW to flush partially coalesced CQ entries. |
| * In Lancer, there is no need to wait for flush compl. |
| */ |
| for (;;) { |
| rxcp = be_rx_compl_get(rxo); |
| if (rxcp == NULL) { |
| if (lancer_chip(adapter)) |
| break; |
| |
| if (flush_wait++ > 10 || be_hw_error(adapter)) { |
| dev_warn(&adapter->pdev->dev, |
| "did not receive flush compl\n"); |
| break; |
| } |
| be_cq_notify(adapter, rx_cq->id, true, 0); |
| mdelay(1); |
| } else { |
| be_rx_compl_discard(rxo, rxcp); |
| be_cq_notify(adapter, rx_cq->id, false, 1); |
| if (rxcp->num_rcvd == 0) |
| break; |
| } |
| } |
| |
| /* After cleanup, leave the CQ in unarmed state */ |
| be_cq_notify(adapter, rx_cq->id, false, 0); |
| |
| /* Then free posted rx buffers that were not used */ |
| tail = (rxq->head + rxq->len - atomic_read(&rxq->used)) % rxq->len; |
| for (; atomic_read(&rxq->used) > 0; index_inc(&tail, rxq->len)) { |
| page_info = get_rx_page_info(rxo, tail); |
| put_page(page_info->page); |
| memset(page_info, 0, sizeof(*page_info)); |
| } |
| BUG_ON(atomic_read(&rxq->used)); |
| rxq->tail = rxq->head = 0; |
| } |
| |
| static void be_tx_compl_clean(struct be_adapter *adapter) |
| { |
| struct be_tx_obj *txo; |
| struct be_queue_info *txq; |
| struct be_eth_tx_compl *txcp; |
| u16 end_idx, cmpl = 0, timeo = 0, num_wrbs = 0; |
| struct sk_buff *sent_skb; |
| bool dummy_wrb; |
| int i, pending_txqs; |
| |
| /* Wait for a max of 200ms for all the tx-completions to arrive. */ |
| do { |
| pending_txqs = adapter->num_tx_qs; |
| |
| for_all_tx_queues(adapter, txo, i) { |
| txq = &txo->q; |
| while ((txcp = be_tx_compl_get(&txo->cq))) { |
| end_idx = |
| AMAP_GET_BITS(struct amap_eth_tx_compl, |
| wrb_index, txcp); |
| num_wrbs += be_tx_compl_process(adapter, txo, |
| end_idx); |
| cmpl++; |
| } |
| if (cmpl) { |
| be_cq_notify(adapter, txo->cq.id, false, cmpl); |
| atomic_sub(num_wrbs, &txq->used); |
| cmpl = 0; |
| num_wrbs = 0; |
| } |
| if (atomic_read(&txq->used) == 0) |
| pending_txqs--; |
| } |
| |
| if (pending_txqs == 0 || ++timeo > 200) |
| break; |
| |
| mdelay(1); |
| } while (true); |
| |
| for_all_tx_queues(adapter, txo, i) { |
| txq = &txo->q; |
| if (atomic_read(&txq->used)) |
| dev_err(&adapter->pdev->dev, "%d pending tx-compls\n", |
| atomic_read(&txq->used)); |
| |
| /* free posted tx for which compls will never arrive */ |
| while (atomic_read(&txq->used)) { |
| sent_skb = txo->sent_skb_list[txq->tail]; |
| end_idx = txq->tail; |
| num_wrbs = wrb_cnt_for_skb(adapter, sent_skb, |
| &dummy_wrb); |
| index_adv(&end_idx, num_wrbs - 1, txq->len); |
| num_wrbs = be_tx_compl_process(adapter, txo, end_idx); |
| atomic_sub(num_wrbs, &txq->used); |
| } |
| } |
| } |
| |
| static void be_evt_queues_destroy(struct be_adapter *adapter) |
| { |
| struct be_eq_obj *eqo; |
| int i; |
| |
| for_all_evt_queues(adapter, eqo, i) { |
| if (eqo->q.created) { |
| be_eq_clean(eqo); |
| be_cmd_q_destroy(adapter, &eqo->q, QTYPE_EQ); |
| netif_napi_del(&eqo->napi); |
| } |
| be_queue_free(adapter, &eqo->q); |
| } |
| } |
| |
| static int be_evt_queues_create(struct be_adapter *adapter) |
| { |
| struct be_queue_info *eq; |
| struct be_eq_obj *eqo; |
| int i, rc; |
| |
| adapter->num_evt_qs = min_t(u16, num_irqs(adapter), |
| adapter->cfg_num_qs); |
| |
| for_all_evt_queues(adapter, eqo, i) { |
| netif_napi_add(adapter->netdev, &eqo->napi, be_poll, |
| BE_NAPI_WEIGHT); |
| eqo->adapter = adapter; |
| eqo->tx_budget = BE_TX_BUDGET; |
| eqo->idx = i; |
| eqo->max_eqd = BE_MAX_EQD; |
| eqo->enable_aic = true; |
| |
| eq = &eqo->q; |
| rc = be_queue_alloc(adapter, eq, EVNT_Q_LEN, |
| sizeof(struct be_eq_entry)); |
| if (rc) |
| return rc; |
| |
| rc = be_cmd_eq_create(adapter, eqo); |
| if (rc) |
| return rc; |
| } |
| return 0; |
| } |
| |
| static void be_mcc_queues_destroy(struct be_adapter *adapter) |
| { |
| struct be_queue_info *q; |
| |
| q = &adapter->mcc_obj.q; |
| if (q->created) |
| be_cmd_q_destroy(adapter, q, QTYPE_MCCQ); |
| be_queue_free(adapter, q); |
| |
| q = &adapter->mcc_obj.cq; |
| if (q->created) |
| be_cmd_q_destroy(adapter, q, QTYPE_CQ); |
| be_queue_free(adapter, q); |
| } |
| |
| /* Must be called only after TX qs are created as MCC shares TX EQ */ |
| static int be_mcc_queues_create(struct be_adapter *adapter) |
| { |
| struct be_queue_info *q, *cq; |
| |
| cq = &adapter->mcc_obj.cq; |
| if (be_queue_alloc(adapter, cq, MCC_CQ_LEN, |
| sizeof(struct be_mcc_compl))) |
| goto err; |
| |
| /* Use the default EQ for MCC completions */ |
| if (be_cmd_cq_create(adapter, cq, &mcc_eqo(adapter)->q, true, 0)) |
| goto mcc_cq_free; |
| |
| q = &adapter->mcc_obj.q; |
| if (be_queue_alloc(adapter, q, MCC_Q_LEN, sizeof(struct be_mcc_wrb))) |
| goto mcc_cq_destroy; |
| |
| if (be_cmd_mccq_create(adapter, q, cq)) |
| goto mcc_q_free; |
| |
| return 0; |
| |
| mcc_q_free: |
| be_queue_free(adapter, q); |
| mcc_cq_destroy: |
| be_cmd_q_destroy(adapter, cq, QTYPE_CQ); |
| mcc_cq_free: |
| be_queue_free(adapter, cq); |
| err: |
| return -1; |
| } |
| |
| static void be_tx_queues_destroy(struct be_adapter *adapter) |
| { |
| struct be_queue_info *q; |
| struct be_tx_obj *txo; |
| u8 i; |
| |
| for_all_tx_queues(adapter, txo, i) { |
| q = &txo->q; |
| if (q->created) |
| be_cmd_q_destroy(adapter, q, QTYPE_TXQ); |
| be_queue_free(adapter, q); |
| |
| q = &txo->cq; |
| if (q->created) |
| be_cmd_q_destroy(adapter, q, QTYPE_CQ); |
| be_queue_free(adapter, q); |
| } |
| } |
| |
| static int be_tx_qs_create(struct be_adapter *adapter) |
| { |
| struct be_queue_info *cq, *eq; |
| struct be_tx_obj *txo; |
| int status, i; |
| |
| adapter->num_tx_qs = min(adapter->num_evt_qs, be_max_txqs(adapter)); |
| |
| for_all_tx_queues(adapter, txo, i) { |
| cq = &txo->cq; |
| status = be_queue_alloc(adapter, cq, TX_CQ_LEN, |
| sizeof(struct be_eth_tx_compl)); |
| if (status) |
| return status; |
| |
| /* If num_evt_qs is less than num_tx_qs, then more than |
| * one txq share an eq |
| */ |
| eq = &adapter->eq_obj[i % adapter->num_evt_qs].q; |
| status = be_cmd_cq_create(adapter, cq, eq, false, 3); |
| if (status) |
| return status; |
| |
| status = be_queue_alloc(adapter, &txo->q, TX_Q_LEN, |
| sizeof(struct be_eth_wrb)); |
| if (status) |
| return status; |
| |
| status = be_cmd_txq_create(adapter, txo); |
| if (status) |
| return status; |
| } |
| |
| dev_info(&adapter->pdev->dev, "created %d TX queue(s)\n", |
| adapter->num_tx_qs); |
| return 0; |
| } |
| |
| static void be_rx_cqs_destroy(struct be_adapter *adapter) |
| { |
| struct be_queue_info *q; |
| struct be_rx_obj *rxo; |
| int i; |
| |
| for_all_rx_queues(adapter, rxo, i) { |
| q = &rxo->cq; |
| if (q->created) |
| be_cmd_q_destroy(adapter, q, QTYPE_CQ); |
| be_queue_free(adapter, q); |
| } |
| } |
| |
| static int be_rx_cqs_create(struct be_adapter *adapter) |
| { |
| struct be_queue_info *eq, *cq; |
| struct be_rx_obj *rxo; |
| int rc, i; |
| |
| /* We can create as many RSS rings as there are EQs. */ |
| adapter->num_rx_qs = adapter->num_evt_qs; |
| |
| /* We'll use RSS only if atleast 2 RSS rings are supported. |
| * When RSS is used, we'll need a default RXQ for non-IP traffic. |
| */ |
| if (adapter->num_rx_qs > 1) |
| adapter->num_rx_qs++; |
| |
| adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; |
| for_all_rx_queues(adapter, rxo, i) { |
| rxo->adapter = adapter; |
| cq = &rxo->cq; |
| rc = be_queue_alloc(adapter, cq, RX_CQ_LEN, |
| sizeof(struct be_eth_rx_compl)); |
| if (rc) |
| return rc; |
| |
| eq = &adapter->eq_obj[i % adapter->num_evt_qs].q; |
| rc = be_cmd_cq_create(adapter, cq, eq, false, 3); |
| if (rc) |
| return rc; |
| } |
| |
| dev_info(&adapter->pdev->dev, |
| "created %d RSS queue(s) and 1 default RX queue\n", |
| adapter->num_rx_qs - 1); |
| return 0; |
| } |
| |
| static irqreturn_t be_intx(int irq, void *dev) |
| { |
| struct be_eq_obj *eqo = dev; |
| struct be_adapter *adapter = eqo->adapter; |
| int num_evts = 0; |
| |
| /* IRQ is not expected when NAPI is scheduled as the EQ |
| * will not be armed. |
| * But, this can happen on Lancer INTx where it takes |
| * a while to de-assert INTx or in BE2 where occasionaly |
| * an interrupt may be raised even when EQ is unarmed. |
| * If NAPI is already scheduled, then counting & notifying |
| * events will orphan them. |
| */ |
| if (napi_schedule_prep(&eqo->napi)) { |
| num_evts = events_get(eqo); |
| __napi_schedule(&eqo->napi); |
| if (num_evts) |
| eqo->spurious_intr = 0; |
| } |
| be_eq_notify(adapter, eqo->q.id, false, true, num_evts); |
| |
| /* Return IRQ_HANDLED only for the the first spurious intr |
| * after a valid intr to stop the kernel from branding |
| * this irq as a bad one! |
| */ |
| if (num_evts || eqo->spurious_intr++ == 0) |
| return IRQ_HANDLED; |
| else |
| return IRQ_NONE; |
| } |
| |
| static irqreturn_t be_msix(int irq, void *dev) |
| { |
| struct be_eq_obj *eqo = dev; |
| |
| be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0); |
| napi_schedule(&eqo->napi); |
| return IRQ_HANDLED; |
| } |
| |
| static inline bool do_gro(struct be_rx_compl_info *rxcp) |
| { |
| return (rxcp->tcpf && !rxcp->err && rxcp->l4_csum) ? true : false; |
| } |
| |
| static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi, |
| int budget) |
| { |
| struct be_adapter *adapter = rxo->adapter; |
| struct be_queue_info *rx_cq = &rxo->cq; |
| struct be_rx_compl_info *rxcp; |
| u32 work_done; |
| |
| for (work_done = 0; work_done < budget; work_done++) { |
| rxcp = be_rx_compl_get(rxo); |
| if (!rxcp) |
| break; |
| |
| /* Is it a flush compl that has no data */ |
| if (unlikely(rxcp->num_rcvd == 0)) |
| goto loop_continue; |
| |
| /* Discard compl with partial DMA Lancer B0 */ |
| if (unlikely(!rxcp->pkt_size)) { |
| be_rx_compl_discard(rxo, rxcp); |
| goto loop_continue; |
| } |
| |
| /* On BE drop pkts that arrive due to imperfect filtering in |
| * promiscuous mode on some skews |
| */ |
| if (unlikely(rxcp->port != adapter->port_num && |
| !lancer_chip(adapter))) { |
| be_rx_compl_discard(rxo, rxcp); |
| goto loop_continue; |
| } |
| |
| if (do_gro(rxcp)) |
| be_rx_compl_process_gro(rxo, napi, rxcp); |
| else |
| be_rx_compl_process(rxo, rxcp); |
| loop_continue: |
| be_rx_stats_update(rxo, rxcp); |
| } |
| |
| if (work_done) { |
| be_cq_notify(adapter, rx_cq->id, true, work_done); |
| |
| if (atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM) |
| be_post_rx_frags(rxo, GFP_ATOMIC); |
| } |
| |
| return work_done; |
| } |
| |
| static bool be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo, |
| int budget, int idx) |
| { |
| struct be_eth_tx_compl *txcp; |
| int num_wrbs = 0, work_done; |
| |
| for (work_done = 0; work_done < budget; work_done++) { |
| txcp = be_tx_compl_get(&txo->cq); |
| if (!txcp) |
| break; |
| num_wrbs += be_tx_compl_process(adapter, txo, |
| AMAP_GET_BITS(struct amap_eth_tx_compl, |
| wrb_index, txcp)); |
| } |
| |
| if (work_done) { |
| be_cq_notify(adapter, txo->cq.id, true, work_done); |
| atomic_sub(num_wrbs, &txo->q.used); |
| |
| /* As Tx wrbs have been freed up, wake up netdev queue |
| * if it was stopped due to lack of tx wrbs. */ |
| if (__netif_subqueue_stopped(adapter->netdev, idx) && |
| atomic_read(&txo->q.used) < txo->q.len / 2) { |
| netif_wake_subqueue(adapter->netdev, idx); |
| } |
| |
| u64_stats_update_begin(&tx_stats(txo)->sync_compl); |
| tx_stats(txo)->tx_compl += work_done; |
| u64_stats_update_end(&tx_stats(txo)->sync_compl); |
| } |
| return (work_done < budget); /* Done */ |
| } |
| |
| int be_poll(struct napi_struct *napi, int budget) |
| { |
| struct be_eq_obj *eqo = container_of(napi, struct be_eq_obj, napi); |
| struct be_adapter *adapter = eqo->adapter; |
| int max_work = 0, work, i, num_evts; |
| bool tx_done; |
| |
| num_evts = events_get(eqo); |
| |
| /* Process all TXQs serviced by this EQ */ |
| for (i = eqo->idx; i < adapter->num_tx_qs; i += adapter->num_evt_qs) { |
| tx_done = be_process_tx(adapter, &adapter->tx_obj[i], |
| eqo->tx_budget, i); |
| if (!tx_done) |
| max_work = budget; |
| } |
| |
| /* This loop will iterate twice for EQ0 in which |
| * completions of the last RXQ (default one) are also processed |
| * For other EQs the loop iterates only once |
| */ |
| for (i = eqo->idx; i < adapter->num_rx_qs; i += adapter->num_evt_qs) { |
| work = be_process_rx(&adapter->rx_obj[i], napi, budget); |
| max_work = max(work, max_work); |
| } |
| |
| if (is_mcc_eqo(eqo)) |
| be_process_mcc(adapter); |
| |
| if (max_work < budget) { |
| napi_complete(napi); |
| be_eq_notify(adapter, eqo->q.id, true, false, num_evts); |
| } else { |
| /* As we'll continue in polling mode, count and clear events */ |
| be_eq_notify(adapter, eqo->q.id, false, false, num_evts); |
| } |
| return max_work; |
| } |
| |
| void be_detect_error(struct be_adapter *adapter) |
| { |
| u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0; |
| u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0; |
| u32 i; |
| |
| if (be_hw_error(adapter)) |
| return; |
| |
| if (lancer_chip(adapter)) { |
| sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET); |
| if (sliport_status & SLIPORT_STATUS_ERR_MASK) { |
| sliport_err1 = ioread32(adapter->db + |
| SLIPORT_ERROR1_OFFSET); |
| sliport_err2 = ioread32(adapter->db + |
| SLIPORT_ERROR2_OFFSET); |
| } |
| } else { |
| pci_read_config_dword(adapter->pdev, |
| PCICFG_UE_STATUS_LOW, &ue_lo); |
| pci_read_config_dword(adapter->pdev, |
| PCICFG_UE_STATUS_HIGH, &ue_hi); |
| pci_read_config_dword(adapter->pdev, |
| PCICFG_UE_STATUS_LOW_MASK, &ue_lo_mask); |
| pci_read_config_dword(adapter->pdev, |
| PCICFG_UE_STATUS_HI_MASK, &ue_hi_mask); |
| |
| ue_lo = (ue_lo & ~ue_lo_mask); |
| ue_hi = (ue_hi & ~ue_hi_mask); |
| } |
| |
| /* On certain platforms BE hardware can indicate spurious UEs. |
| * Allow the h/w to stop working completely in case of a real UE. |
| * Hence not setting the hw_error for UE detection. |
| */ |
| if (sliport_status & SLIPORT_STATUS_ERR_MASK) { |
| adapter->hw_error = true; |
| dev_err(&adapter->pdev->dev, |
| "Error detected in the card\n"); |
| } |
| |
| if (sliport_status & SLIPORT_STATUS_ERR_MASK) { |
| dev_err(&adapter->pdev->dev, |
| "ERR: sliport status 0x%x\n", sliport_status); |
| dev_err(&adapter->pdev->dev, |
| "ERR: sliport error1 0x%x\n", sliport_err1); |
| dev_err(&adapter->pdev->dev, |
| "ERR: sliport error2 0x%x\n", sliport_err2); |
| } |
| |
| if (ue_lo) { |
| for (i = 0; ue_lo; ue_lo >>= 1, i++) { |
| if (ue_lo & 1) |
| dev_err(&adapter->pdev->dev, |
| "UE: %s bit set\n", ue_status_low_desc[i]); |
| } |
| } |
| |
| if (ue_hi) { |
| for (i = 0; ue_hi; ue_hi >>= 1, i++) { |
| if (ue_hi & 1) |
| dev_err(&adapter->pdev->dev, |
| "UE: %s bit set\n", ue_status_hi_desc[i]); |
| } |
| } |
| |
| } |
| |
| static void be_msix_disable(struct be_adapter *adapter) |
| { |
| if (msix_enabled(adapter)) { |
| pci_disable_msix(adapter->pdev); |
| adapter->num_msix_vec = 0; |
| adapter->num_msix_roce_vec = 0; |
| } |
| } |
| |
| static int be_msix_enable(struct be_adapter *adapter) |
| { |
| int i, status, num_vec; |
| struct device *dev = &adapter->pdev->dev; |
| |
| /* If RoCE is supported, program the max number of NIC vectors that |
| * may be configured via set-channels, along with vectors needed for |
| * RoCe. Else, just program the number we'll use initially. |
| */ |
| if (be_roce_supported(adapter)) |
| num_vec = min_t(int, 2 * be_max_eqs(adapter), |
| 2 * num_online_cpus()); |
| else |
| num_vec = adapter->cfg_num_qs; |
| |
| for (i = 0; i < num_vec; i++) |
| adapter->msix_entries[i].entry = i; |
| |
| status = pci_enable_msix(adapter->pdev, adapter->msix_entries, num_vec); |
| if (status == 0) { |
| goto done; |
| } else if (status >= MIN_MSIX_VECTORS) { |
| num_vec = status; |
| status = pci_enable_msix(adapter->pdev, adapter->msix_entries, |
| num_vec); |
| if (!status) |
| goto done; |
| } |
| |
| dev_warn(dev, "MSIx enable failed\n"); |
| |
| /* INTx is not supported in VFs, so fail probe if enable_msix fails */ |
| if (!be_physfn(adapter)) |
| return status; |
| return 0; |
| done: |
| if (be_roce_supported(adapter) && num_vec > MIN_MSIX_VECTORS) { |
| adapter->num_msix_roce_vec = num_vec / 2; |
| dev_info(dev, "enabled %d MSI-x vector(s) for RoCE\n", |
| adapter->num_msix_roce_vec); |
| } |
| |
| adapter->num_msix_vec = num_vec - adapter->num_msix_roce_vec; |
| |
| dev_info(dev, "enabled %d MSI-x vector(s) for NIC\n", |
| adapter->num_msix_vec); |
| return 0; |
| } |
| |
| static inline int be_msix_vec_get(struct be_adapter *adapter, |
| struct be_eq_obj *eqo) |
| { |
| return adapter->msix_entries[eqo->msix_idx].vector; |
| } |
| |
| static int be_msix_register(struct be_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct be_eq_obj *eqo; |
| int status, i, vec; |
| |
| for_all_evt_queues(adapter, eqo, i) { |
| sprintf(eqo->desc, "%s-q%d", netdev->name, i); |
| vec = be_msix_vec_get(adapter, eqo); |
| status = request_irq(vec, be_msix, 0, eqo->desc, eqo); |
| if (status) |
| goto err_msix; |
| } |
| |
| return 0; |
| err_msix: |
| for (i--, eqo = &adapter->eq_obj[i]; i >= 0; i--, eqo--) |
| free_irq(be_msix_vec_get(adapter, eqo), eqo); |
| dev_warn(&adapter->pdev->dev, "MSIX Request IRQ failed - err %d\n", |
| status); |
| be_msix_disable(adapter); |
| return status; |
| } |
| |
| static int be_irq_register(struct be_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int status; |
| |
| if (msix_enabled(adapter)) { |
| status = be_msix_register(adapter); |
| if (status == 0) |
| goto done; |
| /* INTx is not supported for VF */ |
| if (!be_physfn(adapter)) |
| return status; |
| } |
| |
| /* INTx: only the first EQ is used */ |
| netdev->irq = adapter->pdev->irq; |
| status = request_irq(netdev->irq, be_intx, IRQF_SHARED, netdev->name, |
| &adapter->eq_obj[0]); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "INTx request IRQ failed - err %d\n", status); |
| return status; |
| } |
| done: |
| adapter->isr_registered = true; |
| return 0; |
| } |
| |
| static void be_irq_unregister(struct be_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct be_eq_obj *eqo; |
| int i; |
| |
| if (!adapter->isr_registered) |
| return; |
| |
| /* INTx */ |
| if (!msix_enabled(adapter)) { |
| free_irq(netdev->irq, &adapter->eq_obj[0]); |
| goto done; |
| } |
| |
| /* MSIx */ |
| for_all_evt_queues(adapter, eqo, i) |
| free_irq(be_msix_vec_get(adapter, eqo), eqo); |
| |
| done: |
| adapter->isr_registered = false; |
| } |
| |
| static void be_rx_qs_destroy(struct be_adapter *adapter) |
| { |
| struct be_queue_info *q; |
| struct be_rx_obj *rxo; |
| int i; |
| |
| for_all_rx_queues(adapter, rxo, i) { |
| q = &rxo->q; |
| if (q->created) { |
| be_cmd_rxq_destroy(adapter, q); |
| be_rx_cq_clean(rxo); |
| } |
| be_queue_free(adapter, q); |
| } |
| } |
| |
| static int be_close(struct net_device *netdev) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct be_eq_obj *eqo; |
| int i; |
| |
| be_roce_dev_close(adapter); |
| |
| if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { |
| for_all_evt_queues(adapter, eqo, i) |
| napi_disable(&eqo->napi); |
| adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; |
| } |
| |
| be_async_mcc_disable(adapter); |
| |
| /* Wait for all pending tx completions to arrive so that |
| * all tx skbs are freed. |
| */ |
| netif_tx_disable(netdev); |
| be_tx_compl_clean(adapter); |
| |
| be_rx_qs_destroy(adapter); |
| |
| for_all_evt_queues(adapter, eqo, i) { |
| if (msix_enabled(adapter)) |
| synchronize_irq(be_msix_vec_get(adapter, eqo)); |
| else |
| synchronize_irq(netdev->irq); |
| be_eq_clean(eqo); |
| } |
| |
| be_irq_unregister(adapter); |
| |
| return 0; |
| } |
| |
| static int be_rx_qs_create(struct be_adapter *adapter) |
| { |
| struct be_rx_obj *rxo; |
| int rc, i, j; |
| u8 rsstable[128]; |
| |
| for_all_rx_queues(adapter, rxo, i) { |
| rc = be_queue_alloc(adapter, &rxo->q, RX_Q_LEN, |
| sizeof(struct be_eth_rx_d)); |
| if (rc) |
| return rc; |
| } |
| |
| /* The FW would like the default RXQ to be created first */ |
| rxo = default_rxo(adapter); |
| rc = be_cmd_rxq_create(adapter, &rxo->q, rxo->cq.id, rx_frag_size, |
| adapter->if_handle, false, &rxo->rss_id); |
| if (rc) |
| return rc; |
| |
| for_all_rss_queues(adapter, rxo, i) { |
| rc = be_cmd_rxq_create(adapter, &rxo->q, rxo->cq.id, |
| rx_frag_size, adapter->if_handle, |
| true, &rxo->rss_id); |
| if (rc) |
| return rc; |
| } |
| |
| if (be_multi_rxq(adapter)) { |
| for (j = 0; j < 128; j += adapter->num_rx_qs - 1) { |
| for_all_rss_queues(adapter, rxo, i) { |
| if ((j + i) >= 128) |
| break; |
| rsstable[j + i] = rxo->rss_id; |
| } |
| } |
| adapter->rss_flags = RSS_ENABLE_TCP_IPV4 | RSS_ENABLE_IPV4 | |
| RSS_ENABLE_TCP_IPV6 | RSS_ENABLE_IPV6; |
| |
| if (!BEx_chip(adapter)) |
| adapter->rss_flags |= RSS_ENABLE_UDP_IPV4 | |
| RSS_ENABLE_UDP_IPV6; |
| |
| rc = be_cmd_rss_config(adapter, rsstable, adapter->rss_flags, |
| 128); |
| if (rc) { |
| adapter->rss_flags = 0; |
| return rc; |
| } |
| } |
| |
| /* First time posting */ |
| for_all_rx_queues(adapter, rxo, i) |
| be_post_rx_frags(rxo, GFP_KERNEL); |
| return 0; |
| } |
| |
| static int be_open(struct net_device *netdev) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct be_eq_obj *eqo; |
| struct be_rx_obj *rxo; |
| struct be_tx_obj *txo; |
| u8 link_status; |
| int status, i; |
| |
| status = be_rx_qs_create(adapter); |
| if (status) |
| goto err; |
| |
| status = be_irq_register(adapter); |
| if (status) |
| goto err; |
| |
| for_all_rx_queues(adapter, rxo, i) |
| be_cq_notify(adapter, rxo->cq.id, true, 0); |
| |
| for_all_tx_queues(adapter, txo, i) |
| be_cq_notify(adapter, txo->cq.id, true, 0); |
| |
| be_async_mcc_enable(adapter); |
| |
| for_all_evt_queues(adapter, eqo, i) { |
| napi_enable(&eqo->napi); |
| be_eq_notify(adapter, eqo->q.id, true, false, 0); |
| } |
| adapter->flags |= BE_FLAGS_NAPI_ENABLED; |
| |
| status = be_cmd_link_status_query(adapter, NULL, &link_status, 0); |
| if (!status) |
| be_link_status_update(adapter, link_status); |
| |
| netif_tx_start_all_queues(netdev); |
| be_roce_dev_open(adapter); |
| return 0; |
| err: |
| be_close(adapter->netdev); |
| return -EIO; |
| } |
| |
| static int be_setup_wol(struct be_adapter *adapter, bool enable) |
| { |
| struct be_dma_mem cmd; |
| int status = 0; |
| u8 mac[ETH_ALEN]; |
| |
| memset(mac, 0, ETH_ALEN); |
| |
| cmd.size = sizeof(struct be_cmd_req_acpi_wol_magic_config); |
| cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, |
| GFP_KERNEL); |
| if (cmd.va == NULL) |
| return -1; |
| |
| if (enable) { |
| status = pci_write_config_dword(adapter->pdev, |
| PCICFG_PM_CONTROL_OFFSET, PCICFG_PM_CONTROL_MASK); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "Could not enable Wake-on-lan\n"); |
| dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, |
| cmd.dma); |
| return status; |
| } |
| status = be_cmd_enable_magic_wol(adapter, |
| adapter->netdev->dev_addr, &cmd); |
| pci_enable_wake(adapter->pdev, PCI_D3hot, 1); |
| pci_enable_wake(adapter->pdev, PCI_D3cold, 1); |
| } else { |
| status = be_cmd_enable_magic_wol(adapter, mac, &cmd); |
| pci_enable_wake(adapter->pdev, PCI_D3hot, 0); |
| pci_enable_wake(adapter->pdev, PCI_D3cold, 0); |
| } |
| |
| dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma); |
| return status; |
| } |
| |
| /* |
| * Generate a seed MAC address from the PF MAC Address using jhash. |
| * MAC Address for VFs are assigned incrementally starting from the seed. |
| * These addresses are programmed in the ASIC by the PF and the VF driver |
| * queries for the MAC address during its probe. |
| */ |
| static int be_vf_eth_addr_config(struct be_adapter *adapter) |
| { |
| u32 vf; |
| int status = 0; |
| u8 mac[ETH_ALEN]; |
| struct be_vf_cfg *vf_cfg; |
| |
| be_vf_eth_addr_generate(adapter, mac); |
| |
| for_all_vfs(adapter, vf_cfg, vf) { |
| if (BEx_chip(adapter)) |
| status = be_cmd_pmac_add(adapter, mac, |
| vf_cfg->if_handle, |
| &vf_cfg->pmac_id, vf + 1); |
| else |
| status = be_cmd_set_mac(adapter, mac, vf_cfg->if_handle, |
| vf + 1); |
| |
| if (status) |
| dev_err(&adapter->pdev->dev, |
| "Mac address assignment failed for VF %d\n", vf); |
| else |
| memcpy(vf_cfg->mac_addr, mac, ETH_ALEN); |
| |
| mac[5] += 1; |
| } |
| return status; |
| } |
| |
| static int be_vfs_mac_query(struct be_adapter *adapter) |
| { |
| int status, vf; |
| u8 mac[ETH_ALEN]; |
| struct be_vf_cfg *vf_cfg; |
| bool active = false; |
| |
| for_all_vfs(adapter, vf_cfg, vf) { |
| be_cmd_get_mac_from_list(adapter, mac, &active, |
| &vf_cfg->pmac_id, 0); |
| |
| status = be_cmd_mac_addr_query(adapter, mac, false, |
| vf_cfg->if_handle, 0); |
| if (status) |
| return status; |
| memcpy(vf_cfg->mac_addr, mac, ETH_ALEN); |
| } |
| return 0; |
| } |
| |
| static void be_vf_clear(struct be_adapter *adapter) |
| { |
| struct be_vf_cfg *vf_cfg; |
| u32 vf; |
| |
| if (pci_vfs_assigned(adapter->pdev)) { |
| dev_warn(&adapter->pdev->dev, |
| "VFs are assigned to VMs: not disabling VFs\n"); |
| goto done; |
| } |
| |
| pci_disable_sriov(adapter->pdev); |
| |
| for_all_vfs(adapter, vf_cfg, vf) { |
| if (BEx_chip(adapter)) |
| be_cmd_pmac_del(adapter, vf_cfg->if_handle, |
| vf_cfg->pmac_id, vf + 1); |
| else |
| be_cmd_set_mac(adapter, NULL, vf_cfg->if_handle, |
| vf + 1); |
| |
| be_cmd_if_destroy(adapter, vf_cfg->if_handle, vf + 1); |
| } |
| done: |
| kfree(adapter->vf_cfg); |
| adapter->num_vfs = 0; |
| } |
| |
| static void be_clear_queues(struct be_adapter *adapter) |
| { |
| be_mcc_queues_destroy(adapter); |
| be_rx_cqs_destroy(adapter); |
| be_tx_queues_destroy(adapter); |
| be_evt_queues_destroy(adapter); |
| } |
| |
| static void be_cancel_worker(struct be_adapter *adapter) |
| { |
| if (adapter->flags & BE_FLAGS_WORKER_SCHEDULED) { |
| cancel_delayed_work_sync(&adapter->work); |
| adapter->flags &= ~BE_FLAGS_WORKER_SCHEDULED; |
| } |
| } |
| |
| static int be_clear(struct be_adapter *adapter) |
| { |
| int i; |
| |
| be_cancel_worker(adapter); |
| |
| if (sriov_enabled(adapter)) |
| be_vf_clear(adapter); |
| |
| /* delete the primary mac along with the uc-mac list */ |
| for (i = 0; i < (adapter->uc_macs + 1); i++) |
| be_cmd_pmac_del(adapter, adapter->if_handle, |
| adapter->pmac_id[i], 0); |
| adapter->uc_macs = 0; |
| |
| be_cmd_if_destroy(adapter, adapter->if_handle, 0); |
| |
| be_clear_queues(adapter); |
| |
| kfree(adapter->pmac_id); |
| adapter->pmac_id = NULL; |
| |
| be_msix_disable(adapter); |
| return 0; |
| } |
| |
| static int be_vfs_if_create(struct be_adapter *adapter) |
| { |
| struct be_resources res = {0}; |
| struct be_vf_cfg *vf_cfg; |
| u32 cap_flags, en_flags, vf; |
| int status = 0; |
| |
| cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | |
| BE_IF_FLAGS_MULTICAST; |
| |
| for_all_vfs(adapter, vf_cfg, vf) { |
| if (!BE3_chip(adapter)) { |
| status = be_cmd_get_profile_config(adapter, &res, |
| vf + 1); |
| if (!status) |
| cap_flags = res.if_cap_flags; |
| } |
| |
| /* If a FW profile exists, then cap_flags are updated */ |
| en_flags = cap_flags & (BE_IF_FLAGS_UNTAGGED | |
| BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_MULTICAST); |
| status = be_cmd_if_create(adapter, cap_flags, en_flags, |
| &vf_cfg->if_handle, vf + 1); |
| if (status) |
| goto err; |
| } |
| err: |
| return status; |
| } |
| |
| static int be_vf_setup_init(struct be_adapter *adapter) |
| { |
| struct be_vf_cfg *vf_cfg; |
| int vf; |
| |
| adapter->vf_cfg = kcalloc(adapter->num_vfs, sizeof(*vf_cfg), |
| GFP_KERNEL); |
| if (!adapter->vf_cfg) |
| return -ENOMEM; |
| |
| for_all_vfs(adapter, vf_cfg, vf) { |
| vf_cfg->if_handle = -1; |
| vf_cfg->pmac_id = -1; |
| } |
| return 0; |
| } |
| |
| static int be_vf_setup(struct be_adapter *adapter) |
| { |
| struct be_vf_cfg *vf_cfg; |
| u16 def_vlan, lnk_speed; |
| int status, old_vfs, vf; |
| struct device *dev = &adapter->pdev->dev; |
| u32 privileges; |
| |
| old_vfs = pci_num_vf(adapter->pdev); |
| if (old_vfs) { |
| dev_info(dev, "%d VFs are already enabled\n", old_vfs); |
| if (old_vfs != num_vfs) |
| dev_warn(dev, "Ignoring num_vfs=%d setting\n", num_vfs); |
| adapter->num_vfs = old_vfs; |
| } else { |
| if (num_vfs > be_max_vfs(adapter)) |
| dev_info(dev, "Device supports %d VFs and not %d\n", |
| be_max_vfs(adapter), num_vfs); |
| adapter->num_vfs = min_t(u16, num_vfs, be_max_vfs(adapter)); |
| if (!adapter->num_vfs) |
| return 0; |
| } |
| |
| status = be_vf_setup_init(adapter); |
| if (status) |
| goto err; |
| |
| if (old_vfs) { |
| for_all_vfs(adapter, vf_cfg, vf) { |
| status = be_cmd_get_if_id(adapter, vf_cfg, vf); |
| if (status) |
| goto err; |
| } |
| } else { |
| status = be_vfs_if_create(adapter); |
| if (status) |
| goto err; |
| } |
| |
| if (old_vfs) { |
| status = be_vfs_mac_query(adapter); |
| if (status) |
| goto err; |
| } else { |
| status = be_vf_eth_addr_config(adapter); |
| if (status) |
| goto err; |
| } |
| |
| for_all_vfs(adapter, vf_cfg, vf) { |
| /* Allow VFs to programs MAC/VLAN filters */ |
| status = be_cmd_get_fn_privileges(adapter, &privileges, vf + 1); |
| if (!status && !(privileges & BE_PRIV_FILTMGMT)) { |
| status = be_cmd_set_fn_privileges(adapter, |
| privileges | |
| BE_PRIV_FILTMGMT, |
| vf + 1); |
| if (!status) |
| dev_info(dev, "VF%d has FILTMGMT privilege\n", |
| vf); |
| } |
| |
| /* BE3 FW, by default, caps VF TX-rate to 100mbps. |
| * Allow full available bandwidth |
| */ |
| if (BE3_chip(adapter) && !old_vfs) |
| be_cmd_set_qos(adapter, 1000, vf+1); |
| |
| status = be_cmd_link_status_query(adapter, &lnk_speed, |
| NULL, vf + 1); |
| if (!status) |
| vf_cfg->tx_rate = lnk_speed; |
| |
| status = be_cmd_get_hsw_config(adapter, &def_vlan, |
| vf + 1, vf_cfg->if_handle, NULL); |
| if (status) |
| goto err; |
| vf_cfg->def_vid = def_vlan; |
| |
| be_cmd_enable_vf(adapter, vf + 1); |
| } |
| |
| if (!old_vfs) { |
| status = pci_enable_sriov(adapter->pdev, adapter->num_vfs); |
| if (status) { |
| dev_err(dev, "SRIOV enable failed\n"); |
| adapter->num_vfs = 0; |
| goto err; |
| } |
| } |
| return 0; |
| err: |
| dev_err(dev, "VF setup failed\n"); |
| be_vf_clear(adapter); |
| return status; |
| } |
| |
| /* On BE2/BE3 FW does not suggest the supported limits */ |
| static void BEx_get_resources(struct be_adapter *adapter, |
| struct be_resources *res) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| bool use_sriov = false; |
| |
| if (BE3_chip(adapter) && be_physfn(adapter)) { |
| int max_vfs; |
| |
| max_vfs = pci_sriov_get_totalvfs(pdev); |
| res->max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0; |
| use_sriov = res->max_vfs && num_vfs; |
| } |
| |
| if (be_physfn(adapter)) |
| res->max_uc_mac = BE_UC_PMAC_COUNT; |
| else |
| res->max_uc_mac = BE_VF_UC_PMAC_COUNT; |
| |
| if (adapter->function_mode & FLEX10_MODE) |
| res->max_vlans = BE_NUM_VLANS_SUPPORTED/8; |
| else if (adapter->function_mode & UMC_ENABLED) |
| res->max_vlans = BE_UMC_NUM_VLANS_SUPPORTED; |
| else |
| res->max_vlans = BE_NUM_VLANS_SUPPORTED; |
| res->max_mcast_mac = BE_MAX_MC; |
| |
| if (BE2_chip(adapter) || use_sriov || be_is_mc(adapter) || |
| !be_physfn(adapter)) |
| res->max_tx_qs = 1; |
| else |
| res->max_tx_qs = BE3_MAX_TX_QS; |
| |
| if ((adapter->function_caps & BE_FUNCTION_CAPS_RSS) && |
| !use_sriov && be_physfn(adapter)) |
| res->max_rss_qs = (adapter->be3_native) ? |
| BE3_MAX_RSS_QS : BE2_MAX_RSS_QS; |
| res->max_rx_qs = res->max_rss_qs + 1; |
| |
| res->max_evt_qs = be_physfn(adapter) ? BE3_MAX_EVT_QS : 1; |
| |
| res->if_cap_flags = BE_IF_CAP_FLAGS_WANT; |
| if (!(adapter->function_caps & BE_FUNCTION_CAPS_RSS)) |
| res->if_cap_flags &= ~BE_IF_FLAGS_RSS; |
| } |
| |
| static void be_setup_init(struct be_adapter *adapter) |
| { |
| adapter->vlan_prio_bmap = 0xff; |
| adapter->phy.link_speed = -1; |
| adapter->if_handle = -1; |
| adapter->be3_native = false; |
| adapter->promiscuous = false; |
| if (be_physfn(adapter)) |
| adapter->cmd_privileges = MAX_PRIVILEGES; |
| else |
| adapter->cmd_privileges = MIN_PRIVILEGES; |
| } |
| |
| static int be_get_resources(struct be_adapter *adapter) |
| { |
| struct device *dev = &adapter->pdev->dev; |
| struct be_resources res = {0}; |
| int status; |
| |
| if (BEx_chip(adapter)) { |
| BEx_get_resources(adapter, &res); |
| adapter->res = res; |
| } |
| |
| /* For BE3 only check if FW suggests a different max-txqs value */ |
| if (BE3_chip(adapter)) { |
| status = be_cmd_get_profile_config(adapter, &res, 0); |
| if (!status && res.max_tx_qs) |
| adapter->res.max_tx_qs = |
| min(adapter->res.max_tx_qs, res.max_tx_qs); |
| } |
| |
| /* For Lancer, SH etc read per-function resource limits from FW. |
| * GET_FUNC_CONFIG returns per function guaranteed limits. |
| * GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits |
| */ |
| if (!BEx_chip(adapter)) { |
| status = be_cmd_get_func_config(adapter, &res); |
| if (status) |
| return status; |
| |
| /* If RoCE may be enabled stash away half the EQs for RoCE */ |
| if (be_roce_supported(adapter)) |
| res.max_evt_qs /= 2; |
| adapter->res = res; |
| |
| if (be_physfn(adapter)) { |
| status = be_cmd_get_profile_config(adapter, &res, 0); |
| if (status) |
| return status; |
| adapter->res.max_vfs = res.max_vfs; |
| } |
| |
| dev_info(dev, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n", |
| be_max_txqs(adapter), be_max_rxqs(adapter), |
| be_max_rss(adapter), be_max_eqs(adapter), |
| be_max_vfs(adapter)); |
| dev_info(dev, "Max: uc-macs %d, mc-macs %d, vlans %d\n", |
| be_max_uc(adapter), be_max_mc(adapter), |
| be_max_vlans(adapter)); |
| } |
| |
| return 0; |
| } |
| |
| /* Routine to query per function resource limits */ |
| static int be_get_config(struct be_adapter *adapter) |
| { |
| int status; |
| |
| status = be_cmd_query_fw_cfg(adapter, &adapter->port_num, |
| &adapter->function_mode, |
| &adapter->function_caps, |
| &adapter->asic_rev); |
| if (status) |
| return status; |
| |
| status = be_get_resources(adapter); |
| if (status) |
| return status; |
| |
| /* primary mac needs 1 pmac entry */ |
| adapter->pmac_id = kcalloc(be_max_uc(adapter) + 1, sizeof(u32), |
| GFP_KERNEL); |
| if (!adapter->pmac_id) |
| return -ENOMEM; |
| |
| /* Sanitize cfg_num_qs based on HW and platform limits */ |
| adapter->cfg_num_qs = min(adapter->cfg_num_qs, be_max_qs(adapter)); |
| |
| return 0; |
| } |
| |
| static int be_mac_setup(struct be_adapter *adapter) |
| { |
| u8 mac[ETH_ALEN]; |
| int status; |
| |
| if (is_zero_ether_addr(adapter->netdev->dev_addr)) { |
| status = be_cmd_get_perm_mac(adapter, mac); |
| if (status) |
| return status; |
| |
| memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN); |
| memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN); |
| } else { |
| /* Maybe the HW was reset; dev_addr must be re-programmed */ |
| memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN); |
| } |
| |
| /* On BE3 VFs this cmd may fail due to lack of privilege. |
| * Ignore the failure as in this case pmac_id is fetched |
| * in the IFACE_CREATE cmd. |
| */ |
| be_cmd_pmac_add(adapter, mac, adapter->if_handle, |
| &adapter->pmac_id[0], 0); |
| return 0; |
| } |
| |
| static void be_schedule_worker(struct be_adapter *adapter) |
| { |
| schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000)); |
| adapter->flags |= BE_FLAGS_WORKER_SCHEDULED; |
| } |
| |
| static int be_setup_queues(struct be_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int status; |
| |
| status = be_evt_queues_create(adapter); |
| if (status) |
| goto err; |
| |
| status = be_tx_qs_create(adapter); |
| if (status) |
| goto err; |
| |
| status = be_rx_cqs_create(adapter); |
| if (status) |
| goto err; |
| |
| status = be_mcc_queues_create(adapter); |
| if (status) |
| goto err; |
| |
| status = netif_set_real_num_rx_queues(netdev, adapter->num_rx_qs); |
| if (status) |
| goto err; |
| |
| status = netif_set_real_num_tx_queues(netdev, adapter->num_tx_qs); |
| if (status) |
| goto err; |
| |
| return 0; |
| err: |
| dev_err(&adapter->pdev->dev, "queue_setup failed\n"); |
| return status; |
| } |
| |
| int be_update_queues(struct be_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int status; |
| |
| if (netif_running(netdev)) |
| be_close(netdev); |
| |
| be_cancel_worker(adapter); |
| |
| /* If any vectors have been shared with RoCE we cannot re-program |
| * the MSIx table. |
| */ |
| if (!adapter->num_msix_roce_vec) |
| be_msix_disable(adapter); |
| |
| be_clear_queues(adapter); |
| |
| if (!msix_enabled(adapter)) { |
| status = be_msix_enable(adapter); |
| if (status) |
| return status; |
| } |
| |
| status = be_setup_queues(adapter); |
| if (status) |
| return status; |
| |
| be_schedule_worker(adapter); |
| |
| if (netif_running(netdev)) |
| status = be_open(netdev); |
| |
| return status; |
| } |
| |
| static int be_setup(struct be_adapter *adapter) |
| { |
| struct device *dev = &adapter->pdev->dev; |
| u32 tx_fc, rx_fc, en_flags; |
| int status; |
| |
| be_setup_init(adapter); |
| |
| if (!lancer_chip(adapter)) |
| be_cmd_req_native_mode(adapter); |
| |
| status = be_get_config(adapter); |
| if (status) |
| goto err; |
| |
| status = be_msix_enable(adapter); |
| if (status) |
| goto err; |
| |
| en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | |
| BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS; |
| if (adapter->function_caps & BE_FUNCTION_CAPS_RSS) |
| en_flags |= BE_IF_FLAGS_RSS; |
| en_flags = en_flags & be_if_cap_flags(adapter); |
| status = be_cmd_if_create(adapter, be_if_cap_flags(adapter), en_flags, |
| &adapter->if_handle, 0); |
| if (status) |
| goto err; |
| |
| /* Updating real_num_tx/rx_queues() requires rtnl_lock() */ |
| rtnl_lock(); |
| status = be_setup_queues(adapter); |
| rtnl_unlock(); |
| if (status) |
| goto err; |
| |
| be_cmd_get_fn_privileges(adapter, &adapter->cmd_privileges, 0); |
| /* In UMC mode FW does not return right privileges. |
| * Override with correct privilege equivalent to PF. |
| */ |
| if (be_is_mc(adapter)) |
| adapter->cmd_privileges = MAX_PRIVILEGES; |
| |
| status = be_mac_setup(adapter); |
| if (status) |
| goto err; |
| |
| be_cmd_get_fw_ver(adapter, adapter->fw_ver, adapter->fw_on_flash); |
| |
| if (adapter->vlans_added) |
| be_vid_config(adapter); |
| |
| be_set_rx_mode(adapter->netdev); |
| |
| be_cmd_get_flow_control(adapter, &tx_fc, &rx_fc); |
| |
| if (rx_fc != adapter->rx_fc || tx_fc != adapter->tx_fc) |
| be_cmd_set_flow_control(adapter, adapter->tx_fc, |
| adapter->rx_fc); |
| |
| if (be_physfn(adapter) && num_vfs) { |
| if (be_max_vfs(adapter)) |
| be_vf_setup(adapter); |
| else |
| dev_warn(dev, "device doesn't support SRIOV\n"); |
| } |
| |
| status = be_cmd_get_phy_info(adapter); |
| if (!status && be_pause_supported(adapter)) |
| adapter->phy.fc_autoneg = 1; |
| |
| be_schedule_worker(adapter); |
| return 0; |
| err: |
| be_clear(adapter); |
| return status; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void be_netpoll(struct net_device *netdev) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| struct be_eq_obj *eqo; |
| int i; |
| |
| for_all_evt_queues(adapter, eqo, i) { |
| be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0); |
| napi_schedule(&eqo->napi); |
| } |
| |
| return; |
| } |
| #endif |
| |
| #define FW_FILE_HDR_SIGN "ServerEngines Corp. " |
| static char flash_cookie[2][16] = {"*** SE FLAS", "H DIRECTORY *** "}; |
| |
| static bool be_flash_redboot(struct be_adapter *adapter, |
| const u8 *p, u32 img_start, int image_size, |
| int hdr_size) |
| { |
| u32 crc_offset; |
| u8 flashed_crc[4]; |
| int status; |
| |
| crc_offset = hdr_size + img_start + image_size - 4; |
| |
| p += crc_offset; |
| |
| status = be_cmd_get_flash_crc(adapter, flashed_crc, |
| (image_size - 4)); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "could not get crc from flash, not flashing redboot\n"); |
| return false; |
| } |
| |
| /*update redboot only if crc does not match*/ |
| if (!memcmp(flashed_crc, p, 4)) |
| return false; |
| else |
| return true; |
| } |
| |
| static bool phy_flashing_required(struct be_adapter *adapter) |
| { |
| return (adapter->phy.phy_type == TN_8022 && |
| adapter->phy.interface_type == PHY_TYPE_BASET_10GB); |
| } |
| |
| static bool is_comp_in_ufi(struct be_adapter *adapter, |
| struct flash_section_info *fsec, int type) |
| { |
| int i = 0, img_type = 0; |
| struct flash_section_info_g2 *fsec_g2 = NULL; |
| |
| if (BE2_chip(adapter)) |
| fsec_g2 = (struct flash_section_info_g2 *)fsec; |
| |
| for (i = 0; i < MAX_FLASH_COMP; i++) { |
| if (fsec_g2) |
| img_type = le32_to_cpu(fsec_g2->fsec_entry[i].type); |
| else |
| img_type = le32_to_cpu(fsec->fsec_entry[i].type); |
| |
| if (img_type == type) |
| return true; |
| } |
| return false; |
| |
| } |
| |
| static struct flash_section_info *get_fsec_info(struct be_adapter *adapter, |
| int header_size, |
| const struct firmware *fw) |
| { |
| struct flash_section_info *fsec = NULL; |
| const u8 *p = fw->data; |
| |
| p += header_size; |
| while (p < (fw->data + fw->size)) { |
| fsec = (struct flash_section_info *)p; |
| if (!memcmp(flash_cookie, fsec->cookie, sizeof(flash_cookie))) |
| return fsec; |
| p += 32; |
| } |
| return NULL; |
| } |
| |
| static int be_flash(struct be_adapter *adapter, const u8 *img, |
| struct be_dma_mem *flash_cmd, int optype, int img_size) |
| { |
| u32 total_bytes = 0, flash_op, num_bytes = 0; |
| int status = 0; |
| struct be_cmd_write_flashrom *req = flash_cmd->va; |
| |
| total_bytes = img_size; |
| while (total_bytes) { |
| num_bytes = min_t(u32, 32*1024, total_bytes); |
| |
| total_bytes -= num_bytes; |
| |
| if (!total_bytes) { |
| if (optype == OPTYPE_PHY_FW) |
| flash_op = FLASHROM_OPER_PHY_FLASH; |
| else |
| flash_op = FLASHROM_OPER_FLASH; |
| } else { |
| if (optype == OPTYPE_PHY_FW) |
| flash_op = FLASHROM_OPER_PHY_SAVE; |
| else |
| flash_op = FLASHROM_OPER_SAVE; |
| } |
| |
| memcpy(req->data_buf, img, num_bytes); |
| img += num_bytes; |
| status = be_cmd_write_flashrom(adapter, flash_cmd, optype, |
| flash_op, num_bytes); |
| if (status) { |
| if (status == ILLEGAL_IOCTL_REQ && |
| optype == OPTYPE_PHY_FW) |
| break; |
| dev_err(&adapter->pdev->dev, |
| "cmd to write to flash rom failed.\n"); |
| return status; |
| } |
| } |
| return 0; |
| } |
| |
| /* For BE2, BE3 and BE3-R */ |
| static int be_flash_BEx(struct be_adapter *adapter, |
| const struct firmware *fw, |
| struct be_dma_mem *flash_cmd, |
| int num_of_images) |
| |
| { |
| int status = 0, i, filehdr_size = 0; |
| int img_hdrs_size = (num_of_images * sizeof(struct image_hdr)); |
| const u8 *p = fw->data; |
| const struct flash_comp *pflashcomp; |
| int num_comp, redboot; |
| struct flash_section_info *fsec = NULL; |
| |
| struct flash_comp gen3_flash_types[] = { |
| { FLASH_iSCSI_PRIMARY_IMAGE_START_g3, OPTYPE_ISCSI_ACTIVE, |
| FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_iSCSI}, |
| { FLASH_REDBOOT_START_g3, OPTYPE_REDBOOT, |
| FLASH_REDBOOT_IMAGE_MAX_SIZE_g3, IMAGE_BOOT_CODE}, |
| { FLASH_iSCSI_BIOS_START_g3, OPTYPE_BIOS, |
| FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_ISCSI}, |
| { FLASH_PXE_BIOS_START_g3, OPTYPE_PXE_BIOS, |
| FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_PXE}, |
| { FLASH_FCoE_BIOS_START_g3, OPTYPE_FCOE_BIOS, |
| FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_FCoE}, |
| { FLASH_iSCSI_BACKUP_IMAGE_START_g3, OPTYPE_ISCSI_BACKUP, |
| FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_BACKUP_iSCSI}, |
| { FLASH_FCoE_PRIMARY_IMAGE_START_g3, OPTYPE_FCOE_FW_ACTIVE, |
| FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_FCoE}, |
| { FLASH_FCoE_BACKUP_IMAGE_START_g3, OPTYPE_FCOE_FW_BACKUP, |
| FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_BACKUP_FCoE}, |
| { FLASH_NCSI_START_g3, OPTYPE_NCSI_FW, |
| FLASH_NCSI_IMAGE_MAX_SIZE_g3, IMAGE_NCSI}, |
| { FLASH_PHY_FW_START_g3, OPTYPE_PHY_FW, |
| FLASH_PHY_FW_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_PHY} |
| }; |
| |
| struct flash_comp gen2_flash_types[] = { |
| { FLASH_iSCSI_PRIMARY_IMAGE_START_g2, OPTYPE_ISCSI_ACTIVE, |
| FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_iSCSI}, |
| { FLASH_REDBOOT_START_g2, OPTYPE_REDBOOT, |
| FLASH_REDBOOT_IMAGE_MAX_SIZE_g2, IMAGE_BOOT_CODE}, |
| { FLASH_iSCSI_BIOS_START_g2, OPTYPE_BIOS, |
| FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_ISCSI}, |
| { FLASH_PXE_BIOS_START_g2, OPTYPE_PXE_BIOS, |
| FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_PXE}, |
| { FLASH_FCoE_BIOS_START_g2, OPTYPE_FCOE_BIOS, |
| FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_FCoE}, |
| { FLASH_iSCSI_BACKUP_IMAGE_START_g2, OPTYPE_ISCSI_BACKUP, |
| FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_BACKUP_iSCSI}, |
| { FLASH_FCoE_PRIMARY_IMAGE_START_g2, OPTYPE_FCOE_FW_ACTIVE, |
| FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_FCoE}, |
| { FLASH_FCoE_BACKUP_IMAGE_START_g2, OPTYPE_FCOE_FW_BACKUP, |
| FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_BACKUP_FCoE} |
| }; |
| |
| if (BE3_chip(adapter)) { |
| pflashcomp = gen3_flash_types; |
| filehdr_size = sizeof(struct flash_file_hdr_g3); |
| num_comp = ARRAY_SIZE(gen3_flash_types); |
| } else { |
| pflashcomp = gen2_flash_types; |
| filehdr_size = sizeof(struct flash_file_hdr_g2); |
| num_comp = ARRAY_SIZE(gen2_flash_types); |
| } |
| |
| /* Get flash section info*/ |
| fsec = get_fsec_info(adapter, filehdr_size + img_hdrs_size, fw); |
| if (!fsec) { |
| dev_err(&adapter->pdev->dev, |
| "Invalid Cookie. UFI corrupted ?\n"); |
| return -1; |
| } |
| for (i = 0; i < num_comp; i++) { |
| if (!is_comp_in_ufi(adapter, fsec, pflashcomp[i].img_type)) |
| continue; |
| |
| if ((pflashcomp[i].optype == OPTYPE_NCSI_FW) && |
| memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0) |
| continue; |
| |
| if (pflashcomp[i].optype == OPTYPE_PHY_FW && |
| !phy_flashing_required(adapter)) |
| continue; |
| |
| if (pflashcomp[i].optype == OPTYPE_REDBOOT) { |
| redboot = be_flash_redboot(adapter, fw->data, |
| pflashcomp[i].offset, pflashcomp[i].size, |
| filehdr_size + img_hdrs_size); |
| if (!redboot) |
| continue; |
| } |
| |
| p = fw->data; |
| p += filehdr_size + pflashcomp[i].offset + img_hdrs_size; |
| if (p + pflashcomp[i].size > fw->data + fw->size) |
| return -1; |
| |
| status = be_flash(adapter, p, flash_cmd, pflashcomp[i].optype, |
| pflashcomp[i].size); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "Flashing section type %d failed.\n", |
| pflashcomp[i].img_type); |
| return status; |
| } |
| } |
| return 0; |
| } |
| |
| static int be_flash_skyhawk(struct be_adapter *adapter, |
| const struct firmware *fw, |
| struct be_dma_mem *flash_cmd, int num_of_images) |
| { |
| int status = 0, i, filehdr_size = 0; |
| int img_offset, img_size, img_optype, redboot; |
| int img_hdrs_size = num_of_images * sizeof(struct image_hdr); |
| const u8 *p = fw->data; |
| struct flash_section_info *fsec = NULL; |
| |
| filehdr_size = sizeof(struct flash_file_hdr_g3); |
| fsec = get_fsec_info(adapter, filehdr_size + img_hdrs_size, fw); |
| if (!fsec) { |
| dev_err(&adapter->pdev->dev, |
| "Invalid Cookie. UFI corrupted ?\n"); |
| return -1; |
| } |
| |
| for (i = 0; i < le32_to_cpu(fsec->fsec_hdr.num_images); i++) { |
| img_offset = le32_to_cpu(fsec->fsec_entry[i].offset); |
| img_size = le32_to_cpu(fsec->fsec_entry[i].pad_size); |
| |
| switch (le32_to_cpu(fsec->fsec_entry[i].type)) { |
| case IMAGE_FIRMWARE_iSCSI: |
| img_optype = OPTYPE_ISCSI_ACTIVE; |
| break; |
| case IMAGE_BOOT_CODE: |
| img_optype = OPTYPE_REDBOOT; |
| break; |
| case IMAGE_OPTION_ROM_ISCSI: |
| img_optype = OPTYPE_BIOS; |
| break; |
| case IMAGE_OPTION_ROM_PXE: |
| img_optype = OPTYPE_PXE_BIOS; |
| break; |
| case IMAGE_OPTION_ROM_FCoE: |
| img_optype = OPTYPE_FCOE_BIOS; |
| break; |
| case IMAGE_FIRMWARE_BACKUP_iSCSI: |
| img_optype = OPTYPE_ISCSI_BACKUP; |
| break; |
| case IMAGE_NCSI: |
| img_optype = OPTYPE_NCSI_FW; |
| break; |
| default: |
| continue; |
| } |
| |
| if (img_optype == OPTYPE_REDBOOT) { |
| redboot = be_flash_redboot(adapter, fw->data, |
| img_offset, img_size, |
| filehdr_size + img_hdrs_size); |
| if (!redboot) |
| continue; |
| } |
| |
| p = fw->data; |
| p += filehdr_size + img_offset + img_hdrs_size; |
| if (p + img_size > fw->data + fw->size) |
| return -1; |
| |
| status = be_flash(adapter, p, flash_cmd, img_optype, img_size); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "Flashing section type %d failed.\n", |
| fsec->fsec_entry[i].type); |
| return status; |
| } |
| } |
| return 0; |
| } |
| |
| static int lancer_fw_download(struct be_adapter *adapter, |
| const struct firmware *fw) |
| { |
| #define LANCER_FW_DOWNLOAD_CHUNK (32 * 1024) |
| #define LANCER_FW_DOWNLOAD_LOCATION "/prg" |
| struct be_dma_mem flash_cmd; |
| const u8 *data_ptr = NULL; |
| u8 *dest_image_ptr = NULL; |
| size_t image_size = 0; |
| u32 chunk_size = 0; |
| u32 data_written = 0; |
| u32 offset = 0; |
| int status = 0; |
| u8 add_status = 0; |
| u8 change_status; |
| |
| if (!IS_ALIGNED(fw->size, sizeof(u32))) { |
| dev_err(&adapter->pdev->dev, |
| "FW Image not properly aligned. " |
| "Length must be 4 byte aligned.\n"); |
| status = -EINVAL; |
| goto lancer_fw_exit; |
| } |
| |
| flash_cmd.size = sizeof(struct lancer_cmd_req_write_object) |
| + LANCER_FW_DOWNLOAD_CHUNK; |
| flash_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, flash_cmd.size, |
| &flash_cmd.dma, GFP_KERNEL); |
| if (!flash_cmd.va) { |
| status = -ENOMEM; |
| goto lancer_fw_exit; |
| } |
| |
| dest_image_ptr = flash_cmd.va + |
| sizeof(struct lancer_cmd_req_write_object); |
| image_size = fw->size; |
| data_ptr = fw->data; |
| |
| while (image_size) { |
| chunk_size = min_t(u32, image_size, LANCER_FW_DOWNLOAD_CHUNK); |
| |
| /* Copy the image chunk content. */ |
| memcpy(dest_image_ptr, data_ptr, chunk_size); |
| |
| status = lancer_cmd_write_object(adapter, &flash_cmd, |
| chunk_size, offset, |
| LANCER_FW_DOWNLOAD_LOCATION, |
| &data_written, &change_status, |
| &add_status); |
| if (status) |
| break; |
| |
| offset += data_written; |
| data_ptr += data_written; |
| image_size -= data_written; |
| } |
| |
| if (!status) { |
| /* Commit the FW written */ |
| status = lancer_cmd_write_object(adapter, &flash_cmd, |
| 0, offset, |
| LANCER_FW_DOWNLOAD_LOCATION, |
| &data_written, &change_status, |
| &add_status); |
| } |
| |
| dma_free_coherent(&adapter->pdev->dev, flash_cmd.size, flash_cmd.va, |
| flash_cmd.dma); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "Firmware load error. " |
| "Status code: 0x%x Additional Status: 0x%x\n", |
| status, add_status); |
| goto lancer_fw_exit; |
| } |
| |
| if (change_status == LANCER_FW_RESET_NEEDED) { |
| status = lancer_physdev_ctrl(adapter, |
| PHYSDEV_CONTROL_FW_RESET_MASK); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "Adapter busy for FW reset.\n" |
| "New FW will not be active.\n"); |
| goto lancer_fw_exit; |
| } |
| } else if (change_status != LANCER_NO_RESET_NEEDED) { |
| dev_err(&adapter->pdev->dev, |
| "System reboot required for new FW" |
| " to be active\n"); |
| } |
| |
| dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n"); |
| lancer_fw_exit: |
| return status; |
| } |
| |
| #define UFI_TYPE2 2 |
| #define UFI_TYPE3 3 |
| #define UFI_TYPE3R 10 |
| #define UFI_TYPE4 4 |
| static int be_get_ufi_type(struct be_adapter *adapter, |
| struct flash_file_hdr_g3 *fhdr) |
| { |
| if (fhdr == NULL) |
| goto be_get_ufi_exit; |
| |
| if (skyhawk_chip(adapter) && fhdr->build[0] == '4') |
| return UFI_TYPE4; |
| else if (BE3_chip(adapter) && fhdr->build[0] == '3') { |
| if (fhdr->asic_type_rev == 0x10) |
| return UFI_TYPE3R; |
| else |
| return UFI_TYPE3; |
| } else if (BE2_chip(adapter) && fhdr->build[0] == '2') |
| return UFI_TYPE2; |
| |
| be_get_ufi_exit: |
| dev_err(&adapter->pdev->dev, |
| "UFI and Interface are not compatible for flashing\n"); |
| return -1; |
| } |
| |
| static int be_fw_download(struct be_adapter *adapter, const struct firmware* fw) |
| { |
| struct flash_file_hdr_g3 *fhdr3; |
| struct image_hdr *img_hdr_ptr = NULL; |
| struct be_dma_mem flash_cmd; |
| const u8 *p; |
| int status = 0, i = 0, num_imgs = 0, ufi_type = 0; |
| |
| flash_cmd.size = sizeof(struct be_cmd_write_flashrom); |
| flash_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, flash_cmd.size, |
| &flash_cmd.dma, GFP_KERNEL); |
| if (!flash_cmd.va) { |
| status = -ENOMEM; |
| goto be_fw_exit; |
| } |
| |
| p = fw->data; |
| fhdr3 = (struct flash_file_hdr_g3 *)p; |
| |
| ufi_type = be_get_ufi_type(adapter, fhdr3); |
| |
| num_imgs = le32_to_cpu(fhdr3->num_imgs); |
| for (i = 0; i < num_imgs; i++) { |
| img_hdr_ptr = (struct image_hdr *)(fw->data + |
| (sizeof(struct flash_file_hdr_g3) + |
| i * sizeof(struct image_hdr))); |
| if (le32_to_cpu(img_hdr_ptr->imageid) == 1) { |
| switch (ufi_type) { |
| case UFI_TYPE4: |
| status = be_flash_skyhawk(adapter, fw, |
| &flash_cmd, num_imgs); |
| break; |
| case UFI_TYPE3R: |
| status = be_flash_BEx(adapter, fw, &flash_cmd, |
| num_imgs); |
| break; |
| case UFI_TYPE3: |
| /* Do not flash this ufi on BE3-R cards */ |
| if (adapter->asic_rev < 0x10) |
| status = be_flash_BEx(adapter, fw, |
| &flash_cmd, |
| num_imgs); |
| else { |
| status = -1; |
| dev_err(&adapter->pdev->dev, |
| "Can't load BE3 UFI on BE3R\n"); |
| } |
| } |
| } |
| } |
| |
| if (ufi_type == UFI_TYPE2) |
| status = be_flash_BEx(adapter, fw, &flash_cmd, 0); |
| else if (ufi_type == -1) |
| status = -1; |
| |
| dma_free_coherent(&adapter->pdev->dev, flash_cmd.size, flash_cmd.va, |
| flash_cmd.dma); |
| if (status) { |
| dev_err(&adapter->pdev->dev, "Firmware load error\n"); |
| goto be_fw_exit; |
| } |
| |
| dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n"); |
| |
| be_fw_exit: |
| return status; |
| } |
| |
| int be_load_fw(struct be_adapter *adapter, u8 *fw_file) |
| { |
| const struct firmware *fw; |
| int status; |
| |
| if (!netif_running(adapter->netdev)) { |
| dev_err(&adapter->pdev->dev, |
| "Firmware load not allowed (interface is down)\n"); |
| return -1; |
| } |
| |
| status = request_firmware(&fw, fw_file, &adapter->pdev->dev); |
| if (status) |
| goto fw_exit; |
| |
| dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file); |
| |
| if (lancer_chip(adapter)) |
| status = lancer_fw_download(adapter, fw); |
| else |
| status = be_fw_download(adapter, fw); |
| |
| if (!status) |
| be_cmd_get_fw_ver(adapter, adapter->fw_ver, |
| adapter->fw_on_flash); |
| |
| fw_exit: |
| release_firmware(fw); |
| return status; |
| } |
| |
| static int be_ndo_bridge_setlink(struct net_device *dev, |
| struct nlmsghdr *nlh) |
| { |
| struct be_adapter *adapter = netdev_priv(dev); |
| struct nlattr *attr, *br_spec; |
| int rem; |
| int status = 0; |
| u16 mode = 0; |
| |
| if (!sriov_enabled(adapter)) |
| return -EOPNOTSUPP; |
| |
| br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); |
| |
| nla_for_each_nested(attr, br_spec, rem) { |
| if (nla_type(attr) != IFLA_BRIDGE_MODE) |
| continue; |
| |
| mode = nla_get_u16(attr); |
| if (mode != BRIDGE_MODE_VEPA && mode != BRIDGE_MODE_VEB) |
| return -EINVAL; |
| |
| status = be_cmd_set_hsw_config(adapter, 0, 0, |
| adapter->if_handle, |
| mode == BRIDGE_MODE_VEPA ? |
| PORT_FWD_TYPE_VEPA : |
| PORT_FWD_TYPE_VEB); |
| if (status) |
| goto err; |
| |
| dev_info(&adapter->pdev->dev, "enabled switch mode: %s\n", |
| mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); |
| |
| return status; |
| } |
| err: |
| dev_err(&adapter->pdev->dev, "Failed to set switch mode %s\n", |
| mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); |
| |
| return status; |
| } |
| |
| static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, |
| struct net_device *dev, |
| u32 filter_mask) |
| { |
| struct be_adapter *adapter = netdev_priv(dev); |
| int status = 0; |
| u8 hsw_mode; |
| |
| if (!sriov_enabled(adapter)) |
| return 0; |
| |
| /* BE and Lancer chips support VEB mode only */ |
| if (BEx_chip(adapter) || lancer_chip(adapter)) { |
| hsw_mode = PORT_FWD_TYPE_VEB; |
| } else { |
| status = be_cmd_get_hsw_config(adapter, NULL, 0, |
| adapter->if_handle, &hsw_mode); |
| if (status) |
| return 0; |
| } |
| |
| return ndo_dflt_bridge_getlink(skb, pid, seq, dev, |
| hsw_mode == PORT_FWD_TYPE_VEPA ? |
| BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB); |
| } |
| |
| static const struct net_device_ops be_netdev_ops = { |
| .ndo_open = be_open, |
| .ndo_stop = be_close, |
| .ndo_start_xmit = be_xmit, |
| .ndo_set_rx_mode = be_set_rx_mode, |
| .ndo_set_mac_address = be_mac_addr_set, |
| .ndo_change_mtu = be_change_mtu, |
| .ndo_get_stats64 = be_get_stats64, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_vlan_rx_add_vid = be_vlan_add_vid, |
| .ndo_vlan_rx_kill_vid = be_vlan_rem_vid, |
| .ndo_set_vf_mac = be_set_vf_mac, |
| .ndo_set_vf_vlan = be_set_vf_vlan, |
| .ndo_set_vf_tx_rate = be_set_vf_tx_rate, |
| .ndo_get_vf_config = be_get_vf_config, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = be_netpoll, |
| #endif |
| .ndo_bridge_setlink = be_ndo_bridge_setlink, |
| .ndo_bridge_getlink = be_ndo_bridge_getlink, |
| }; |
| |
| static void be_netdev_init(struct net_device *netdev) |
| { |
| struct be_adapter *adapter = netdev_priv(netdev); |
| |
| netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | |
| NETIF_F_HW_VLAN_CTAG_TX; |
| if (be_multi_rxq(adapter)) |
| netdev->hw_features |= NETIF_F_RXHASH; |
| |
| netdev->features |= netdev->hw_features | |
| NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; |
| |
| netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; |
| |
| netdev->priv_flags |= IFF_UNICAST_FLT; |
| |
| netdev->flags |= IFF_MULTICAST; |
| |
| netif_set_gso_max_size(netdev, 65535 - ETH_HLEN); |
| |
| netdev->netdev_ops = &be_netdev_ops; |
| |
| SET_ETHTOOL_OPS(netdev, &be_ethtool_ops); |
| } |
| |
| static void be_unmap_pci_bars(struct be_adapter *adapter) |
| { |
| if (adapter->csr) |
| pci_iounmap(adapter->pdev, adapter->csr); |
| if (adapter->db) |
| pci_iounmap(adapter->pdev, adapter->db); |
| } |
| |
| static int db_bar(struct be_adapter *adapter) |
| { |
| if (lancer_chip(adapter) || !be_physfn(adapter)) |
| return 0; |
| else |
| return 4; |
| } |
| |
| static int be_roce_map_pci_bars(struct be_adapter *adapter) |
| { |
| if (skyhawk_chip(adapter)) { |
| adapter->roce_db.size = 4096; |
| adapter->roce_db.io_addr = pci_resource_start(adapter->pdev, |
| db_bar(adapter)); |
| adapter->roce_db.total_size = pci_resource_len(adapter->pdev, |
| db_bar(adapter)); |
| } |
| return 0; |
| } |
| |
| static int be_map_pci_bars(struct be_adapter *adapter) |
| { |
| u8 __iomem *addr; |
| u32 sli_intf; |
| |
| pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf); |
| adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >> |
| SLI_INTF_IF_TYPE_SHIFT; |
| |
| if (BEx_chip(adapter) && be_physfn(adapter)) { |
| adapter->csr = pci_iomap(adapter->pdev, 2, 0); |
| if (adapter->csr == NULL) |
| return -ENOMEM; |
| } |
| |
| addr = pci_iomap(adapter->pdev, db_bar(adapter), 0); |
| if (addr == NULL) |
| goto pci_map_err; |
| adapter->db = addr; |
| |
| be_roce_map_pci_bars(adapter); |
| return 0; |
| |
| pci_map_err: |
| be_unmap_pci_bars(adapter); |
| return -ENOMEM; |
| } |
| |
| static void be_ctrl_cleanup(struct be_adapter *adapter) |
| { |
| struct be_dma_mem *mem = &adapter->mbox_mem_alloced; |
| |
| be_unmap_pci_bars(adapter); |
| |
| if (mem->va) |
| dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va, |
| mem->dma); |
| |
| mem = &adapter->rx_filter; |
| if (mem->va) |
| dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va, |
| mem->dma); |
| } |
| |
| static int be_ctrl_init(struct be_adapter *adapter) |
| { |
| struct be_dma_mem *mbox_mem_alloc = &adapter->mbox_mem_alloced; |
| struct be_dma_mem *mbox_mem_align = &adapter->mbox_mem; |
| struct be_dma_mem *rx_filter = &adapter->rx_filter; |
| u32 sli_intf; |
| int status; |
| |
| pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf); |
| adapter->sli_family = (sli_intf & SLI_INTF_FAMILY_MASK) >> |
| SLI_INTF_FAMILY_SHIFT; |
| adapter->virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0; |
| |
| status = be_map_pci_bars(adapter); |
| if (status) |
| goto done; |
| |
| mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16; |
| mbox_mem_alloc->va = dma_alloc_coherent(&adapter->pdev->dev, |
| mbox_mem_alloc->size, |
| &mbox_mem_alloc->dma, |
| GFP_KERNEL); |
| if (!mbox_mem_alloc->va) { |
| status = -ENOMEM; |
| goto unmap_pci_bars; |
| } |
| mbox_mem_align->size = sizeof(struct be_mcc_mailbox); |
| mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16); |
| mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16); |
| memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox)); |
| |
| rx_filter->size = sizeof(struct be_cmd_req_rx_filter); |
| rx_filter->va = dma_zalloc_coherent(&adapter->pdev->dev, |
| rx_filter->size, &rx_filter->dma, |
| GFP_KERNEL); |
| if (rx_filter->va == NULL) { |
| status = -ENOMEM; |
| goto free_mbox; |
| } |
| |
| mutex_init(&adapter->mbox_lock); |
| spin_lock_init(&adapter->mcc_lock); |
| spin_lock_init(&adapter->mcc_cq_lock); |
| |
| init_completion(&adapter->flash_compl); |
| pci_save_state(adapter->pdev); |
| return 0; |
| |
| free_mbox: |
| dma_free_coherent(&adapter->pdev->dev, mbox_mem_alloc->size, |
| mbox_mem_alloc->va, mbox_mem_alloc->dma); |
| |
| unmap_pci_bars: |
| be_unmap_pci_bars(adapter); |
| |
| done: |
| return status; |
| } |
| |
| static void be_stats_cleanup(struct be_adapter *adapter) |
| { |
| struct be_dma_mem *cmd = &adapter->stats_cmd; |
| |
| if (cmd->va) |
| dma_free_coherent(&adapter->pdev->dev, cmd->size, |
| cmd->va, cmd->dma); |
| } |
| |
| static int be_stats_init(struct be_adapter *adapter) |
| { |
| struct be_dma_mem *cmd = &adapter->stats_cmd; |
| |
| if (lancer_chip(adapter)) |
| cmd->size = sizeof(struct lancer_cmd_req_pport_stats); |
| else if (BE2_chip(adapter)) |
| cmd->size = sizeof(struct be_cmd_req_get_stats_v0); |
| else |
| /* BE3 and Skyhawk */ |
| cmd->size = sizeof(struct be_cmd_req_get_stats_v1); |
| |
| cmd->va = dma_zalloc_coherent(&adapter->pdev->dev, cmd->size, &cmd->dma, |
| GFP_KERNEL); |
| if (cmd->va == NULL) |
| return -1; |
| return 0; |
| } |
| |
| static void be_remove(struct pci_dev *pdev) |
| { |
| struct be_adapter *adapter = pci_get_drvdata(pdev); |
| |
| if (!adapter) |
| return; |
| |
| be_roce_dev_remove(adapter); |
| be_intr_set(adapter, false); |
| |
| cancel_delayed_work_sync(&adapter->func_recovery_work); |
| |
| unregister_netdev(adapter->netdev); |
| |
| be_clear(adapter); |
| |
| /* tell fw we're done with firing cmds */ |
| be_cmd_fw_clean(adapter); |
| |
| be_stats_cleanup(adapter); |
| |
| be_ctrl_cleanup(adapter); |
| |
| pci_disable_pcie_error_reporting(pdev); |
| |
| pci_set_drvdata(pdev, NULL); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| |
| free_netdev(adapter->netdev); |
| } |
| |
| bool be_is_wol_supported(struct be_adapter *adapter) |
| { |
| return ((adapter->wol_cap & BE_WOL_CAP) && |
| !be_is_wol_excluded(adapter)) ? true : false; |
| } |
| |
| u32 be_get_fw_log_level(struct be_adapter *adapter) |
| { |
| struct be_dma_mem extfat_cmd; |
| struct be_fat_conf_params *cfgs; |
| int status; |
| u32 level = 0; |
| int j; |
| |
| if (lancer_chip(adapter)) |
| return 0; |
| |
| memset(&extfat_cmd, 0, sizeof(struct be_dma_mem)); |
| extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps); |
| extfat_cmd.va = pci_alloc_consistent(adapter->pdev, extfat_cmd.size, |
| &extfat_cmd.dma); |
| |
| if (!extfat_cmd.va) { |
| dev_err(&adapter->pdev->dev, "%s: Memory allocation failure\n", |
| __func__); |
| goto err; |
| } |
| |
| status = be_cmd_get_ext_fat_capabilites(adapter, &extfat_cmd); |
| if (!status) { |
| cfgs = (struct be_fat_conf_params *)(extfat_cmd.va + |
| sizeof(struct be_cmd_resp_hdr)); |
| for (j = 0; j < le32_to_cpu(cfgs->module[0].num_modes); j++) { |
| if (cfgs->module[0].trace_lvl[j].mode == MODE_UART) |
| level = cfgs->module[0].trace_lvl[j].dbg_lvl; |
| } |
| } |
| pci_free_consistent(adapter->pdev, extfat_cmd.size, extfat_cmd.va, |
| extfat_cmd.dma); |
| err: |
| return level; |
| } |
| |
| static int be_get_initial_config(struct be_adapter *adapter) |
| { |
| int status; |
| u32 level; |
| |
| status = be_cmd_get_cntl_attributes(adapter); |
| if (status) |
| return status; |
| |
| status = be_cmd_get_acpi_wol_cap(adapter); |
| if (status) { |
| /* in case of a failure to get wol capabillities |
| * check the exclusion list to determine WOL capability */ |
| if (!be_is_wol_excluded(adapter)) |
| adapter->wol_cap |= BE_WOL_CAP; |
| } |
| |
| if (be_is_wol_supported(adapter)) |
| adapter->wol = true; |
| |
| /* Must be a power of 2 or else MODULO will BUG_ON */ |
| adapter->be_get_temp_freq = 64; |
| |
| level = be_get_fw_log_level(adapter); |
| adapter->msg_enable = level <= FW_LOG_LEVEL_DEFAULT ? NETIF_MSG_HW : 0; |
| |
| adapter->cfg_num_qs = netif_get_num_default_rss_queues(); |
| return 0; |
| } |
| |
| static int lancer_recover_func(struct be_adapter *adapter) |
| { |
| struct device *dev = &adapter->pdev->dev; |
| int status; |
| |
| status = lancer_test_and_set_rdy_state(adapter); |
| if (status) |
| goto err; |
| |
| if (netif_running(adapter->netdev)) |
| be_close(adapter->netdev); |
| |
| be_clear(adapter); |
| |
| be_clear_all_error(adapter); |
| |
| status = be_setup(adapter); |
| if (status) |
| goto err; |
| |
| if (netif_running(adapter->netdev)) { |
| status = be_open(adapter->netdev); |
| if (status) |
| goto err; |
| } |
| |
| dev_err(dev, "Error recovery successful\n"); |
| return 0; |
| err: |
| if (status == -EAGAIN) |
| dev_err(dev, "Waiting for resource provisioning\n"); |
| else |
| dev_err(dev, "Error recovery failed\n"); |
| |
| return status; |
| } |
| |
| static void be_func_recovery_task(struct work_struct *work) |
| { |
| struct be_adapter *adapter = |
| container_of(work, struct be_adapter, func_recovery_work.work); |
| int status = 0; |
| |
| be_detect_error(adapter); |
| |
| if (adapter->hw_error && lancer_chip(adapter)) { |
| |
| rtnl_lock(); |
| netif_device_detach(adapter->netdev); |
| rtnl_unlock(); |
| |
| status = lancer_recover_func(adapter); |
| if (!status) |
| netif_device_attach(adapter->netdev); |
| } |
| |
| /* In Lancer, for all errors other than provisioning error (-EAGAIN), |
| * no need to attempt further recovery. |
| */ |
| if (!status || status == -EAGAIN) |
| schedule_delayed_work(&adapter->func_recovery_work, |
| msecs_to_jiffies(1000)); |
| } |
| |
| static void be_worker(struct work_struct *work) |
| { |
| struct be_adapter *adapter = |
| container_of(work, struct be_adapter, work.work); |
| struct be_rx_obj *rxo; |
| struct be_eq_obj *eqo; |
| int i; |
| |
| /* when interrupts are not yet enabled, just reap any pending |
| * mcc completions */ |
| if (!netif_running(adapter->netdev)) { |
| local_bh_disable(); |
| be_process_mcc(adapter); |
| local_bh_enable(); |
| goto reschedule; |
| } |
| |
| if (!adapter->stats_cmd_sent) { |
| if (lancer_chip(adapter)) |
| lancer_cmd_get_pport_stats(adapter, |
| &adapter->stats_cmd); |
| else |
| be_cmd_get_stats(adapter, &adapter->stats_cmd); |
| } |
| |
| if (be_physfn(adapter) && |
| MODULO(adapter->work_counter, adapter->be_get_temp_freq) == 0) |
| be_cmd_get_die_temperature(adapter); |
| |
| for_all_rx_queues(adapter, rxo, i) { |
| if (rxo->rx_post_starved) { |
| rxo->rx_post_starved = false; |
| be_post_rx_frags(rxo, GFP_KERNEL); |
| } |
| } |
| |
| for_all_evt_queues(adapter, eqo, i) |
| be_eqd_update(adapter, eqo); |
| |
| reschedule: |
| adapter->work_counter++; |
| schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000)); |
| } |
| |
| /* If any VFs are already enabled don't FLR the PF */ |
| static bool be_reset_required(struct be_adapter *adapter) |
| { |
| return pci_num_vf(adapter->pdev) ? false : true; |
| } |
| |
| static char *mc_name(struct be_adapter *adapter) |
| { |
| if (adapter->function_mode & FLEX10_MODE) |
| return "FLEX10"; |
| else if (adapter->function_mode & VNIC_MODE) |
| return "vNIC"; |
| else if (adapter->function_mode & UMC_ENABLED) |
| return "UMC"; |
| else |
| return ""; |
| } |
| |
| static inline char *func_name(struct be_adapter *adapter) |
| { |
| return be_physfn(adapter) ? "PF" : "VF"; |
| } |
| |
| static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) |
| { |
| int status = 0; |
| struct be_adapter *adapter; |
| struct net_device *netdev; |
| char port_name; |
| |
| status = pci_enable_device(pdev); |
| if (status) |
| goto do_none; |
| |
| status = pci_request_regions(pdev, DRV_NAME); |
| if (status) |
| goto disable_dev; |
| pci_set_master(pdev); |
| |
| netdev = alloc_etherdev_mqs(sizeof(*adapter), MAX_TX_QS, MAX_RX_QS); |
| if (netdev == NULL) { |
| status = -ENOMEM; |
| goto rel_reg; |
| } |
| adapter = netdev_priv(netdev); |
| adapter->pdev = pdev; |
| pci_set_drvdata(pdev, adapter); |
| adapter->netdev = netdev; |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); |
| if (!status) { |
| status = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); |
| if (status < 0) { |
| dev_err(&pdev->dev, "dma_set_coherent_mask failed\n"); |
| goto free_netdev; |
| } |
| netdev->features |= NETIF_F_HIGHDMA; |
| } else { |
| status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| if (!status) |
| status = dma_set_coherent_mask(&pdev->dev, |
| DMA_BIT_MASK(32)); |
| if (status) { |
| dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); |
| goto free_netdev; |
| } |
| } |
| |
| status = pci_enable_pcie_error_reporting(pdev); |
| if (status) |
| dev_info(&pdev->dev, "Could not use PCIe error reporting\n"); |
| |
| status = be_ctrl_init(adapter); |
| if (status) |
| goto free_netdev; |
| |
| /* sync up with fw's ready state */ |
| if (be_physfn(adapter)) { |
| status = be_fw_wait_ready(adapter); |
| if (status) |
| goto ctrl_clean; |
| } |
| |
| if (be_reset_required(adapter)) { |
| status = be_cmd_reset_function(adapter); |
| if (status) |
| goto ctrl_clean; |
| |
| /* Wait for interrupts to quiesce after an FLR */ |
| msleep(100); |
| } |
| |
| /* Allow interrupts for other ULPs running on NIC function */ |
| be_intr_set(adapter, true); |
| |
| /* tell fw we're ready to fire cmds */ |
| status = be_cmd_fw_init(adapter); |
| if (status) |
| goto ctrl_clean; |
| |
| status = be_stats_init(adapter); |
| if (status) |
| goto ctrl_clean; |
| |
| status = be_get_initial_config(adapter); |
| if (status) |
| goto stats_clean; |
| |
| INIT_DELAYED_WORK(&adapter->work, be_worker); |
| INIT_DELAYED_WORK(&adapter->func_recovery_work, be_func_recovery_task); |
| adapter->rx_fc = adapter->tx_fc = true; |
| |
| status = be_setup(adapter); |
| if (status) |
| goto stats_clean; |
| |
| be_netdev_init(netdev); |
| status = register_netdev(netdev); |
| if (status != 0) |
| goto unsetup; |
| |
| be_roce_dev_add(adapter); |
| |
| schedule_delayed_work(&adapter->func_recovery_work, |
| msecs_to_jiffies(1000)); |
| |
| be_cmd_query_port_name(adapter, &port_name); |
| |
| dev_info(&pdev->dev, "%s: %s %s port %c\n", nic_name(pdev), |
| func_name(adapter), mc_name(adapter), port_name); |
| |
| return 0; |
| |
| unsetup: |
| be_clear(adapter); |
| stats_clean: |
| be_stats_cleanup(adapter); |
| ctrl_clean: |
| be_ctrl_cleanup(adapter); |
| free_netdev: |
| free_netdev(netdev); |
| pci_set_drvdata(pdev, NULL); |
| rel_reg: |
| pci_release_regions(pdev); |
| disable_dev: |
| pci_disable_device(pdev); |
| do_none: |
| dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev)); |
| return status; |
| } |
| |
| static int be_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct be_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| if (adapter->wol) |
| be_setup_wol(adapter, true); |
| |
| cancel_delayed_work_sync(&adapter->func_recovery_work); |
| |
| netif_device_detach(netdev); |
| if (netif_running(netdev)) { |
| rtnl_lock(); |
| be_close(netdev); |
| rtnl_unlock(); |
| } |
| be_clear(adapter); |
| |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| return 0; |
| } |
| |
| static int be_resume(struct pci_dev *pdev) |
| { |
| int status = 0; |
| struct be_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| netif_device_detach(netdev); |
| |
| status = pci_enable_device(pdev); |
| if (status) |
| return status; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| status = be_fw_wait_ready(adapter); |
| if (status) |
| return status; |
| |
| /* tell fw we're ready to fire cmds */ |
| status = be_cmd_fw_init(adapter); |
| if (status) |
| return status; |
| |
| be_setup(adapter); |
| if (netif_running(netdev)) { |
| rtnl_lock(); |
| be_open(netdev); |
| rtnl_unlock(); |
| } |
| |
| schedule_delayed_work(&adapter->func_recovery_work, |
| msecs_to_jiffies(1000)); |
| netif_device_attach(netdev); |
| |
| if (adapter->wol) |
| be_setup_wol(adapter, false); |
| |
| return 0; |
| } |
| |
| /* |
| * An FLR will stop BE from DMAing any data. |
| */ |
| static void be_shutdown(struct pci_dev *pdev) |
| { |
| struct be_adapter *adapter = pci_get_drvdata(pdev); |
| |
| if (!adapter) |
| return; |
| |
| cancel_delayed_work_sync(&adapter->work); |
| cancel_delayed_work_sync(&adapter->func_recovery_work); |
| |
| netif_device_detach(adapter->netdev); |
| |
| be_cmd_reset_function(adapter); |
| |
| pci_disable_device(pdev); |
| } |
| |
| static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct be_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| dev_err(&adapter->pdev->dev, "EEH error detected\n"); |
| |
| if (!adapter->eeh_error) { |
| adapter->eeh_error = true; |
| |
| cancel_delayed_work_sync(&adapter->func_recovery_work); |
| |
| rtnl_lock(); |
| netif_device_detach(netdev); |
| if (netif_running(netdev)) |
| be_close(netdev); |
| rtnl_unlock(); |
| |
| be_clear(adapter); |
| } |
| |
| if (state == pci_channel_io_perm_failure) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| pci_disable_device(pdev); |
| |
| /* The error could cause the FW to trigger a flash debug dump. |
| * Resetting the card while flash dump is in progress |
| * can cause it not to recover; wait for it to finish. |
| * Wait only for first function as it is needed only once per |
| * adapter. |
| */ |
| if (pdev->devfn == 0) |
| ssleep(30); |
| |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) |
| { |
| struct be_adapter *adapter = pci_get_drvdata(pdev); |
| int status; |
| |
| dev_info(&adapter->pdev->dev, "EEH reset\n"); |
| |
| status = pci_enable_device(pdev); |
| if (status) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| pci_set_master(pdev); |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| /* Check if card is ok and fw is ready */ |
| dev_info(&adapter->pdev->dev, |
| "Waiting for FW to be ready after EEH reset\n"); |
| status = be_fw_wait_ready(adapter); |
| if (status) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| pci_cleanup_aer_uncorrect_error_status(pdev); |
| be_clear_all_error(adapter); |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static void be_eeh_resume(struct pci_dev *pdev) |
| { |
| int status = 0; |
| struct be_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| dev_info(&adapter->pdev->dev, "EEH resume\n"); |
| |
| pci_save_state(pdev); |
| |
| status = be_cmd_reset_function(adapter); |
| if (status) |
| goto err; |
| |
| /* tell fw we're ready to fire cmds */ |
| status = be_cmd_fw_init(adapter); |
| if (status) |
| goto err; |
| |
| status = be_setup(adapter); |
| if (status) |
| goto err; |
| |
| if (netif_running(netdev)) { |
| status = be_open(netdev); |
| if (status) |
| goto err; |
| } |
| |
| schedule_delayed_work(&adapter->func_recovery_work, |
| msecs_to_jiffies(1000)); |
| netif_device_attach(netdev); |
| return; |
| err: |
| dev_err(&adapter->pdev->dev, "EEH resume failed\n"); |
| } |
| |
| static const struct pci_error_handlers be_eeh_handlers = { |
| .error_detected = be_eeh_err_detected, |
| .slot_reset = be_eeh_reset, |
| .resume = be_eeh_resume, |
| }; |
| |
| static struct pci_driver be_driver = { |
| .name = DRV_NAME, |
| .id_table = be_dev_ids, |
| .probe = be_probe, |
| .remove = be_remove, |
| .suspend = be_suspend, |
| .resume = be_resume, |
| .shutdown = be_shutdown, |
| .err_handler = &be_eeh_handlers |
| }; |
| |
| static int __init be_init_module(void) |
| { |
| if (rx_frag_size != 8192 && rx_frag_size != 4096 && |
| rx_frag_size != 2048) { |
| printk(KERN_WARNING DRV_NAME |
| " : Module param rx_frag_size must be 2048/4096/8192." |
| " Using 2048\n"); |
| rx_frag_size = 2048; |
| } |
| |
| return pci_register_driver(&be_driver); |
| } |
| module_init(be_init_module); |
| |
| static void __exit be_exit_module(void) |
| { |
| pci_unregister_driver(&be_driver); |
| } |
| module_exit(be_exit_module); |