| /* |
| * (c) Copyright 2002-2010, Ralink Technology, Inc. |
| * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/firmware.h> |
| #include <linux/delay.h> |
| #include <linux/usb.h> |
| #include <linux/skbuff.h> |
| |
| #include "mt7601u.h" |
| #include "dma.h" |
| #include "mcu.h" |
| #include "usb.h" |
| #include "trace.h" |
| |
| #define MCU_FW_URB_MAX_PAYLOAD 0x3800 |
| #define MCU_FW_URB_SIZE (MCU_FW_URB_MAX_PAYLOAD + 12) |
| #define MCU_RESP_URB_SIZE 1024 |
| |
| static inline int firmware_running(struct mt7601u_dev *dev) |
| { |
| return mt7601u_rr(dev, MT_MCU_COM_REG0) == 1; |
| } |
| |
| static inline void skb_put_le32(struct sk_buff *skb, u32 val) |
| { |
| put_unaligned_le32(val, skb_put(skb, 4)); |
| } |
| |
| static inline void mt7601u_dma_skb_wrap_cmd(struct sk_buff *skb, |
| u8 seq, enum mcu_cmd cmd) |
| { |
| WARN_ON(mt7601u_dma_skb_wrap(skb, CPU_TX_PORT, DMA_COMMAND, |
| FIELD_PREP(MT_TXD_CMD_INFO_SEQ, seq) | |
| FIELD_PREP(MT_TXD_CMD_INFO_TYPE, cmd))); |
| } |
| |
| static inline void trace_mt_mcu_msg_send_cs(struct mt7601u_dev *dev, |
| struct sk_buff *skb, bool need_resp) |
| { |
| u32 i, csum = 0; |
| |
| for (i = 0; i < skb->len / 4; i++) |
| csum ^= get_unaligned_le32(skb->data + i * 4); |
| |
| trace_mt_mcu_msg_send(dev, skb, csum, need_resp); |
| } |
| |
| static struct sk_buff * |
| mt7601u_mcu_msg_alloc(struct mt7601u_dev *dev, const void *data, int len) |
| { |
| struct sk_buff *skb; |
| |
| WARN_ON(len % 4); /* if length is not divisible by 4 we need to pad */ |
| |
| skb = alloc_skb(len + MT_DMA_HDR_LEN + 4, GFP_KERNEL); |
| skb_reserve(skb, MT_DMA_HDR_LEN); |
| memcpy(skb_put(skb, len), data, len); |
| |
| return skb; |
| } |
| |
| static int mt7601u_mcu_wait_resp(struct mt7601u_dev *dev, u8 seq) |
| { |
| struct urb *urb = dev->mcu.resp.urb; |
| u32 rxfce; |
| int urb_status, ret, i = 5; |
| |
| while (i--) { |
| if (!wait_for_completion_timeout(&dev->mcu.resp_cmpl, |
| msecs_to_jiffies(300))) { |
| dev_warn(dev->dev, "Warning: %s retrying\n", __func__); |
| continue; |
| } |
| |
| /* Make copies of important data before reusing the urb */ |
| rxfce = get_unaligned_le32(dev->mcu.resp.buf); |
| urb_status = urb->status * mt7601u_urb_has_error(urb); |
| |
| ret = mt7601u_usb_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP, |
| &dev->mcu.resp, GFP_KERNEL, |
| mt7601u_complete_urb, |
| &dev->mcu.resp_cmpl); |
| if (ret) |
| return ret; |
| |
| if (urb_status) |
| dev_err(dev->dev, "Error: MCU resp urb failed:%d\n", |
| urb_status); |
| |
| if (FIELD_GET(MT_RXD_CMD_INFO_CMD_SEQ, rxfce) == seq && |
| FIELD_GET(MT_RXD_CMD_INFO_EVT_TYPE, rxfce) == CMD_DONE) |
| return 0; |
| |
| dev_err(dev->dev, "Error: MCU resp evt:%lx seq:%hhx-%lx!\n", |
| FIELD_GET(MT_RXD_CMD_INFO_EVT_TYPE, rxfce), |
| seq, FIELD_GET(MT_RXD_CMD_INFO_CMD_SEQ, rxfce)); |
| } |
| |
| dev_err(dev->dev, "Error: %s timed out\n", __func__); |
| return -ETIMEDOUT; |
| } |
| |
| static int |
| mt7601u_mcu_msg_send(struct mt7601u_dev *dev, struct sk_buff *skb, |
| enum mcu_cmd cmd, bool wait_resp) |
| { |
| struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); |
| unsigned cmd_pipe = usb_sndbulkpipe(usb_dev, |
| dev->out_eps[MT_EP_OUT_INBAND_CMD]); |
| int sent, ret; |
| u8 seq = 0; |
| |
| if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) |
| return 0; |
| |
| mutex_lock(&dev->mcu.mutex); |
| |
| if (wait_resp) |
| while (!seq) |
| seq = ++dev->mcu.msg_seq & 0xf; |
| |
| mt7601u_dma_skb_wrap_cmd(skb, seq, cmd); |
| |
| if (dev->mcu.resp_cmpl.done) |
| dev_err(dev->dev, "Error: MCU response pre-completed!\n"); |
| |
| trace_mt_mcu_msg_send_cs(dev, skb, wait_resp); |
| trace_mt_submit_urb_sync(dev, cmd_pipe, skb->len); |
| ret = usb_bulk_msg(usb_dev, cmd_pipe, skb->data, skb->len, &sent, 500); |
| if (ret) { |
| dev_err(dev->dev, "Error: send MCU cmd failed:%d\n", ret); |
| goto out; |
| } |
| if (sent != skb->len) |
| dev_err(dev->dev, "Error: %s sent != skb->len\n", __func__); |
| |
| if (wait_resp) |
| ret = mt7601u_mcu_wait_resp(dev, seq); |
| out: |
| mutex_unlock(&dev->mcu.mutex); |
| |
| consume_skb(skb); |
| |
| return ret; |
| } |
| |
| static int mt7601u_mcu_function_select(struct mt7601u_dev *dev, |
| enum mcu_function func, u32 val) |
| { |
| struct sk_buff *skb; |
| struct { |
| __le32 id; |
| __le32 value; |
| } __packed __aligned(4) msg = { |
| .id = cpu_to_le32(func), |
| .value = cpu_to_le32(val), |
| }; |
| |
| skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg)); |
| return mt7601u_mcu_msg_send(dev, skb, CMD_FUN_SET_OP, func == 5); |
| } |
| |
| int mt7601u_mcu_tssi_read_kick(struct mt7601u_dev *dev, int use_hvga) |
| { |
| int ret; |
| |
| if (!test_bit(MT7601U_STATE_MCU_RUNNING, &dev->state)) |
| return 0; |
| |
| ret = mt7601u_mcu_function_select(dev, ATOMIC_TSSI_SETTING, |
| use_hvga); |
| if (ret) { |
| dev_warn(dev->dev, "Warning: MCU TSSI read kick failed\n"); |
| return ret; |
| } |
| |
| dev->tssi_read_trig = true; |
| |
| return 0; |
| } |
| |
| int |
| mt7601u_mcu_calibrate(struct mt7601u_dev *dev, enum mcu_calibrate cal, u32 val) |
| { |
| struct sk_buff *skb; |
| struct { |
| __le32 id; |
| __le32 value; |
| } __packed __aligned(4) msg = { |
| .id = cpu_to_le32(cal), |
| .value = cpu_to_le32(val), |
| }; |
| |
| skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg)); |
| return mt7601u_mcu_msg_send(dev, skb, CMD_CALIBRATION_OP, true); |
| } |
| |
| int mt7601u_write_reg_pairs(struct mt7601u_dev *dev, u32 base, |
| const struct mt76_reg_pair *data, int n) |
| { |
| const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8; |
| struct sk_buff *skb; |
| int cnt, i, ret; |
| |
| if (!n) |
| return 0; |
| |
| cnt = min(max_vals_per_cmd, n); |
| |
| skb = alloc_skb(cnt * 8 + MT_DMA_HDR_LEN + 4, GFP_KERNEL); |
| if (!skb) |
| return -ENOMEM; |
| skb_reserve(skb, MT_DMA_HDR_LEN); |
| |
| for (i = 0; i < cnt; i++) { |
| skb_put_le32(skb, base + data[i].reg); |
| skb_put_le32(skb, data[i].value); |
| } |
| |
| ret = mt7601u_mcu_msg_send(dev, skb, CMD_RANDOM_WRITE, cnt == n); |
| if (ret) |
| return ret; |
| |
| return mt7601u_write_reg_pairs(dev, base, data + cnt, n - cnt); |
| } |
| |
| int mt7601u_burst_write_regs(struct mt7601u_dev *dev, u32 offset, |
| const u32 *data, int n) |
| { |
| const int max_regs_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1; |
| struct sk_buff *skb; |
| int cnt, i, ret; |
| |
| if (!n) |
| return 0; |
| |
| cnt = min(max_regs_per_cmd, n); |
| |
| skb = alloc_skb(cnt * 4 + MT_DMA_HDR_LEN + 4, GFP_KERNEL); |
| if (!skb) |
| return -ENOMEM; |
| skb_reserve(skb, MT_DMA_HDR_LEN); |
| |
| skb_put_le32(skb, MT_MCU_MEMMAP_WLAN + offset); |
| for (i = 0; i < cnt; i++) |
| skb_put_le32(skb, data[i]); |
| |
| ret = mt7601u_mcu_msg_send(dev, skb, CMD_BURST_WRITE, cnt == n); |
| if (ret) |
| return ret; |
| |
| return mt7601u_burst_write_regs(dev, offset + cnt * 4, |
| data + cnt, n - cnt); |
| } |
| |
| struct mt76_fw_header { |
| __le32 ilm_len; |
| __le32 dlm_len; |
| __le16 build_ver; |
| __le16 fw_ver; |
| u8 pad[4]; |
| char build_time[16]; |
| }; |
| |
| struct mt76_fw { |
| struct mt76_fw_header hdr; |
| u8 ivb[MT_MCU_IVB_SIZE]; |
| u8 ilm[]; |
| }; |
| |
| static int __mt7601u_dma_fw(struct mt7601u_dev *dev, |
| const struct mt7601u_dma_buf *dma_buf, |
| const void *data, u32 len, u32 dst_addr) |
| { |
| DECLARE_COMPLETION_ONSTACK(cmpl); |
| struct mt7601u_dma_buf buf = *dma_buf; /* we need to fake length */ |
| __le32 reg; |
| u32 val; |
| int ret; |
| |
| reg = cpu_to_le32(FIELD_PREP(MT_TXD_INFO_TYPE, DMA_PACKET) | |
| FIELD_PREP(MT_TXD_INFO_D_PORT, CPU_TX_PORT) | |
| FIELD_PREP(MT_TXD_INFO_LEN, len)); |
| memcpy(buf.buf, ®, sizeof(reg)); |
| memcpy(buf.buf + sizeof(reg), data, len); |
| memset(buf.buf + sizeof(reg) + len, 0, 8); |
| |
| ret = mt7601u_vendor_single_wr(dev, MT_VEND_WRITE_FCE, |
| MT_FCE_DMA_ADDR, dst_addr); |
| if (ret) |
| return ret; |
| len = roundup(len, 4); |
| ret = mt7601u_vendor_single_wr(dev, MT_VEND_WRITE_FCE, |
| MT_FCE_DMA_LEN, len << 16); |
| if (ret) |
| return ret; |
| |
| buf.len = MT_DMA_HDR_LEN + len + 4; |
| ret = mt7601u_usb_submit_buf(dev, USB_DIR_OUT, MT_EP_OUT_INBAND_CMD, |
| &buf, GFP_KERNEL, |
| mt7601u_complete_urb, &cmpl); |
| if (ret) |
| return ret; |
| |
| if (!wait_for_completion_timeout(&cmpl, msecs_to_jiffies(1000))) { |
| dev_err(dev->dev, "Error: firmware upload timed out\n"); |
| usb_kill_urb(buf.urb); |
| return -ETIMEDOUT; |
| } |
| if (mt7601u_urb_has_error(buf.urb)) { |
| dev_err(dev->dev, "Error: firmware upload urb failed:%d\n", |
| buf.urb->status); |
| return buf.urb->status; |
| } |
| |
| val = mt7601u_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX); |
| val++; |
| mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX, val); |
| |
| return 0; |
| } |
| |
| static int |
| mt7601u_dma_fw(struct mt7601u_dev *dev, struct mt7601u_dma_buf *dma_buf, |
| const void *data, int len, u32 dst_addr) |
| { |
| int n, ret; |
| |
| if (len == 0) |
| return 0; |
| |
| n = min(MCU_FW_URB_MAX_PAYLOAD, len); |
| ret = __mt7601u_dma_fw(dev, dma_buf, data, n, dst_addr); |
| if (ret) |
| return ret; |
| |
| if (!mt76_poll_msec(dev, MT_MCU_COM_REG1, BIT(31), BIT(31), 500)) |
| return -ETIMEDOUT; |
| |
| return mt7601u_dma_fw(dev, dma_buf, data + n, len - n, dst_addr + n); |
| } |
| |
| static int |
| mt7601u_upload_firmware(struct mt7601u_dev *dev, const struct mt76_fw *fw) |
| { |
| struct mt7601u_dma_buf dma_buf; |
| void *ivb; |
| u32 ilm_len, dlm_len; |
| int i, ret; |
| |
| ivb = kmemdup(fw->ivb, sizeof(fw->ivb), GFP_KERNEL); |
| if (!ivb) |
| return -ENOMEM; |
| if (mt7601u_usb_alloc_buf(dev, MCU_FW_URB_SIZE, &dma_buf)) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| ilm_len = le32_to_cpu(fw->hdr.ilm_len) - sizeof(fw->ivb); |
| dev_dbg(dev->dev, "loading FW - ILM %u + IVB %zu\n", |
| ilm_len, sizeof(fw->ivb)); |
| ret = mt7601u_dma_fw(dev, &dma_buf, fw->ilm, ilm_len, sizeof(fw->ivb)); |
| if (ret) |
| goto error; |
| |
| dlm_len = le32_to_cpu(fw->hdr.dlm_len); |
| dev_dbg(dev->dev, "loading FW - DLM %u\n", dlm_len); |
| ret = mt7601u_dma_fw(dev, &dma_buf, fw->ilm + ilm_len, |
| dlm_len, MT_MCU_DLM_OFFSET); |
| if (ret) |
| goto error; |
| |
| ret = mt7601u_vendor_request(dev, MT_VEND_DEV_MODE, USB_DIR_OUT, |
| 0x12, 0, ivb, sizeof(fw->ivb)); |
| if (ret < 0) |
| goto error; |
| ret = 0; |
| |
| for (i = 100; i && !firmware_running(dev); i--) |
| msleep(10); |
| if (!i) { |
| ret = -ETIMEDOUT; |
| goto error; |
| } |
| |
| dev_dbg(dev->dev, "Firmware running!\n"); |
| error: |
| kfree(ivb); |
| mt7601u_usb_free_buf(dev, &dma_buf); |
| |
| return ret; |
| } |
| |
| static int mt7601u_load_firmware(struct mt7601u_dev *dev) |
| { |
| const struct firmware *fw; |
| const struct mt76_fw_header *hdr; |
| int len, ret; |
| u32 val; |
| |
| mt7601u_wr(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN | |
| MT_USB_DMA_CFG_TX_BULK_EN)); |
| |
| if (firmware_running(dev)) |
| return 0; |
| |
| ret = request_firmware(&fw, MT7601U_FIRMWARE, dev->dev); |
| if (ret) |
| return ret; |
| |
| if (!fw || !fw->data || fw->size < sizeof(*hdr)) |
| goto err_inv_fw; |
| |
| hdr = (const struct mt76_fw_header *) fw->data; |
| |
| if (le32_to_cpu(hdr->ilm_len) <= MT_MCU_IVB_SIZE) |
| goto err_inv_fw; |
| |
| len = sizeof(*hdr); |
| len += le32_to_cpu(hdr->ilm_len); |
| len += le32_to_cpu(hdr->dlm_len); |
| |
| if (fw->size != len) |
| goto err_inv_fw; |
| |
| val = le16_to_cpu(hdr->fw_ver); |
| dev_info(dev->dev, |
| "Firmware Version: %d.%d.%02d Build: %x Build time: %.16s\n", |
| (val >> 12) & 0xf, (val >> 8) & 0xf, val & 0xf, |
| le16_to_cpu(hdr->build_ver), hdr->build_time); |
| |
| len = le32_to_cpu(hdr->ilm_len); |
| |
| mt7601u_wr(dev, 0x94c, 0); |
| mt7601u_wr(dev, MT_FCE_PSE_CTRL, 0); |
| |
| mt7601u_vendor_reset(dev); |
| msleep(5); |
| |
| mt7601u_wr(dev, 0xa44, 0); |
| mt7601u_wr(dev, 0x230, 0x84210); |
| mt7601u_wr(dev, 0x400, 0x80c00); |
| mt7601u_wr(dev, 0x800, 1); |
| |
| mt7601u_rmw(dev, MT_PBF_CFG, 0, (MT_PBF_CFG_TX0Q_EN | |
| MT_PBF_CFG_TX1Q_EN | |
| MT_PBF_CFG_TX2Q_EN | |
| MT_PBF_CFG_TX3Q_EN)); |
| |
| mt7601u_wr(dev, MT_FCE_PSE_CTRL, 1); |
| |
| mt7601u_wr(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN | |
| MT_USB_DMA_CFG_TX_BULK_EN)); |
| val = mt76_set(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_CLR); |
| val &= ~MT_USB_DMA_CFG_TX_CLR; |
| mt7601u_wr(dev, MT_USB_DMA_CFG, val); |
| |
| /* FCE tx_fs_base_ptr */ |
| mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_BASE_PTR, 0x400230); |
| /* FCE tx_fs_max_cnt */ |
| mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_MAX_COUNT, 1); |
| /* FCE pdma enable */ |
| mt7601u_wr(dev, MT_FCE_PDMA_GLOBAL_CONF, 0x44); |
| /* FCE skip_fs_en */ |
| mt7601u_wr(dev, MT_FCE_SKIP_FS, 3); |
| |
| ret = mt7601u_upload_firmware(dev, (const struct mt76_fw *)fw->data); |
| |
| release_firmware(fw); |
| |
| return ret; |
| |
| err_inv_fw: |
| dev_err(dev->dev, "Invalid firmware image\n"); |
| release_firmware(fw); |
| return -ENOENT; |
| } |
| |
| int mt7601u_mcu_init(struct mt7601u_dev *dev) |
| { |
| int ret; |
| |
| mutex_init(&dev->mcu.mutex); |
| |
| ret = mt7601u_load_firmware(dev); |
| if (ret) |
| return ret; |
| |
| set_bit(MT7601U_STATE_MCU_RUNNING, &dev->state); |
| |
| return 0; |
| } |
| |
| int mt7601u_mcu_cmd_init(struct mt7601u_dev *dev) |
| { |
| int ret; |
| |
| ret = mt7601u_mcu_function_select(dev, Q_SELECT, 1); |
| if (ret) |
| return ret; |
| |
| init_completion(&dev->mcu.resp_cmpl); |
| if (mt7601u_usb_alloc_buf(dev, MCU_RESP_URB_SIZE, &dev->mcu.resp)) { |
| mt7601u_usb_free_buf(dev, &dev->mcu.resp); |
| return -ENOMEM; |
| } |
| |
| ret = mt7601u_usb_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP, |
| &dev->mcu.resp, GFP_KERNEL, |
| mt7601u_complete_urb, &dev->mcu.resp_cmpl); |
| if (ret) { |
| mt7601u_usb_free_buf(dev, &dev->mcu.resp); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| void mt7601u_mcu_cmd_deinit(struct mt7601u_dev *dev) |
| { |
| usb_kill_urb(dev->mcu.resp.urb); |
| mt7601u_usb_free_buf(dev, &dev->mcu.resp); |
| } |