| /* Copyright (c) 2007, 2013-2014, 2016-2018, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2007 Google Incorporated |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/file.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/major.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/uaccess.h> |
| #include <linux/sched.h> |
| #include <linux/mutex.h> |
| #include "linux/proc_fs.h" |
| #include <linux/delay.h> |
| |
| #include "mdss_fb.h" |
| #include "mdp3_ppp.h" |
| #include "mdp3_hwio.h" |
| #include "mdp3.h" |
| #include "mdss_debug.h" |
| #include "mdss_sync.h" |
| |
| #define MDP_IS_IMGTYPE_BAD(x) ((x) >= MDP_IMGTYPE_LIMIT) |
| #define MDP_RELEASE_BW_TIMEOUT 50 |
| |
| #define MDP_PPP_MAX_BPP 4 |
| #define MDP_PPP_DYNAMIC_FACTOR 3 |
| #define MDP_PPP_MAX_READ_WRITE 3 |
| #define MDP_PPP_MAX_WIDTH 0xFFF |
| #define ENABLE_SOLID_FILL 0x2 |
| #define DISABLE_SOLID_FILL 0x0 |
| #define BLEND_LATENCY 3 |
| #define CSC_LATENCY 1 |
| |
| #define YUV_BW_FUDGE_NUM 10 |
| #define YUV_BW_FUDGE_DEN 10 |
| |
| struct ppp_resource ppp_res; |
| |
| static const bool valid_fmt[MDP_IMGTYPE_LIMIT] = { |
| [MDP_RGB_565] = true, |
| [MDP_BGR_565] = true, |
| [MDP_RGB_888] = true, |
| [MDP_BGR_888] = true, |
| [MDP_BGRA_8888] = true, |
| [MDP_RGBA_8888] = true, |
| [MDP_ARGB_8888] = true, |
| [MDP_XRGB_8888] = true, |
| [MDP_RGBX_8888] = true, |
| [MDP_Y_CRCB_H2V2] = true, |
| [MDP_Y_CBCR_H2V2] = true, |
| [MDP_Y_CBCR_H2V2_ADRENO] = true, |
| [MDP_Y_CBCR_H2V2_VENUS] = true, |
| [MDP_YCRYCB_H2V1] = true, |
| [MDP_Y_CBCR_H2V1] = true, |
| [MDP_Y_CRCB_H2V1] = true, |
| [MDP_BGRX_8888] = true, |
| }; |
| |
| #define MAX_LIST_WINDOW 16 |
| #define MDP3_PPP_MAX_LIST_REQ 8 |
| |
| struct blit_req_list { |
| int count; |
| struct mdp_blit_req req_list[MAX_LIST_WINDOW]; |
| struct mdp3_img_data src_data[MAX_LIST_WINDOW]; |
| struct mdp3_img_data dst_data[MAX_LIST_WINDOW]; |
| struct mdss_fence *acq_fen[MDP_MAX_FENCE_FD]; |
| u32 acq_fen_cnt; |
| int cur_rel_fen_fd; |
| struct sync_pt *cur_rel_sync_pt; |
| struct mdss_fence *cur_rel_fence; |
| struct mdss_fence *last_rel_fence; |
| }; |
| |
| struct blit_req_queue { |
| struct blit_req_list req[MDP3_PPP_MAX_LIST_REQ]; |
| int count; |
| int push_idx; |
| int pop_idx; |
| }; |
| |
| struct ppp_status { |
| bool wait_for_pop; |
| struct completion ppp_comp; |
| struct completion pop_q_comp; |
| struct mutex req_mutex; /* Protect request queue */ |
| struct mutex config_ppp_mutex; /* Only one client configure register */ |
| struct msm_fb_data_type *mfd; |
| |
| struct kthread_work blit_work; |
| struct kthread_worker kworker; |
| struct task_struct *blit_thread; |
| struct blit_req_queue req_q; |
| |
| struct mdss_timeline *timeline; |
| |
| int timeline_value; |
| |
| struct timer_list free_bw_timer; |
| struct work_struct free_bw_work; |
| bool bw_update; |
| bool bw_on; |
| u32 mdp_clk; |
| }; |
| |
| static struct ppp_status *ppp_stat; |
| static bool is_blit_optimization_possible(struct blit_req_list *req, int indx); |
| |
| static inline u64 fudge_factor(u64 val, u32 numer, u32 denom) |
| { |
| u64 result = (val * (u64)numer); |
| |
| do_div(result, denom); |
| return result; |
| } |
| |
| int ppp_get_bpp(uint32_t format, uint32_t fb_format) |
| { |
| int bpp = -EINVAL; |
| |
| if (format == MDP_FB_FORMAT) |
| format = fb_format; |
| |
| bpp = ppp_bpp(format); |
| if (bpp <= 0) |
| pr_err("%s incorrect format %d\n", __func__, format); |
| return bpp; |
| } |
| |
| int mdp3_ppp_get_img(struct mdp_img *img, struct mdp_blit_req *req, |
| struct mdp3_img_data *data) |
| { |
| struct msmfb_data fb_data; |
| uint32_t stride; |
| int bpp = ppp_bpp(img->format); |
| |
| if (bpp <= 0) { |
| pr_err("%s incorrect format %d\n", __func__, img->format); |
| return -EINVAL; |
| } |
| |
| if (img->width > MDP_PPP_MAX_WIDTH) { |
| pr_err("%s incorrect width %d\n", __func__, img->width); |
| return -EINVAL; |
| } |
| |
| fb_data.flags = img->priv; |
| fb_data.memory_id = img->memory_id; |
| fb_data.offset = 0; |
| |
| stride = img->width * bpp; |
| data->padding = 16 * stride; |
| |
| return mdp3_get_img(&fb_data, data, MDP3_CLIENT_PPP); |
| } |
| |
| /* Check format */ |
| int mdp3_ppp_verify_fmt(struct mdp_blit_req *req) |
| { |
| if (MDP_IS_IMGTYPE_BAD(req->src.format) || |
| MDP_IS_IMGTYPE_BAD(req->dst.format)) { |
| pr_err("%s: Color format out of range\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!valid_fmt[req->src.format] || |
| !valid_fmt[req->dst.format]) { |
| pr_err("%s: Color format not supported\n", __func__); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* Check resolution */ |
| int mdp3_ppp_verify_res(struct mdp_blit_req *req) |
| { |
| if ((req->src.width == 0) || (req->src.height == 0) || |
| (req->src_rect.w == 0) || (req->src_rect.h == 0) || |
| (req->dst.width == 0) || (req->dst.height == 0) || |
| (req->dst_rect.w == 0) || (req->dst_rect.h == 0)) { |
| pr_err("%s: Height/width can't be 0\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (((req->src_rect.x + req->src_rect.w) > req->src.width) || |
| ((req->src_rect.y + req->src_rect.h) > req->src.height)) { |
| pr_err("%s: src roi larger than boundary\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (((req->dst_rect.x + req->dst_rect.w) > req->dst.width) || |
| ((req->dst_rect.y + req->dst_rect.h) > req->dst.height)) { |
| pr_err("%s: dst roi larger than boundary\n", __func__); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* scaling range check */ |
| int mdp3_ppp_verify_scale(struct mdp_blit_req *req) |
| { |
| u32 src_width, src_height, dst_width, dst_height; |
| |
| src_width = req->src_rect.w; |
| src_height = req->src_rect.h; |
| |
| if (req->flags & MDP_ROT_90) { |
| dst_width = req->dst_rect.h; |
| dst_height = req->dst_rect.w; |
| } else { |
| dst_width = req->dst_rect.w; |
| dst_height = req->dst_rect.h; |
| } |
| |
| switch (req->dst.format) { |
| case MDP_Y_CRCB_H2V2: |
| case MDP_Y_CBCR_H2V2: |
| src_width = (src_width / 2) * 2; |
| src_height = (src_height / 2) * 2; |
| dst_width = (dst_width / 2) * 2; |
| dst_height = (dst_height / 2) * 2; |
| break; |
| |
| case MDP_Y_CRCB_H2V1: |
| case MDP_Y_CBCR_H2V1: |
| case MDP_YCRYCB_H2V1: |
| src_width = (src_width / 2) * 2; |
| dst_width = (dst_width / 2) * 2; |
| break; |
| |
| default: |
| break; |
| } |
| |
| if (((MDP_SCALE_Q_FACTOR * dst_width) / src_width > |
| MDP_MAX_X_SCALE_FACTOR) |
| || ((MDP_SCALE_Q_FACTOR * dst_width) / src_width < |
| MDP_MIN_X_SCALE_FACTOR)) { |
| pr_err("%s: x req scale factor beyond capability\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (((MDP_SCALE_Q_FACTOR * dst_height) / src_height > |
| MDP_MAX_Y_SCALE_FACTOR) |
| || ((MDP_SCALE_Q_FACTOR * dst_height) / src_height < |
| MDP_MIN_Y_SCALE_FACTOR)) { |
| pr_err("%s: y req scale factor beyond capability\n", __func__); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* operation check */ |
| int mdp3_ppp_verify_op(struct mdp_blit_req *req) |
| { |
| /* |
| * MDP_DEINTERLACE & MDP_SHARPENING Flags are not valid for MDP3 |
| * so using them together for MDP_SMART_BLIT. |
| */ |
| if ((req->flags & MDP_SMART_BLIT) == MDP_SMART_BLIT) |
| return 0; |
| if (req->flags & MDP_DEINTERLACE) { |
| pr_err("\n%s(): deinterlace not supported", __func__); |
| return -EINVAL; |
| } |
| |
| if (req->flags & MDP_SHARPENING) { |
| pr_err("\n%s(): sharpening not supported", __func__); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| int mdp3_ppp_verify_req(struct mdp_blit_req *req) |
| { |
| int rc; |
| |
| if (req == NULL) { |
| pr_err("%s: req == null\n", __func__); |
| return -EINVAL; |
| } |
| |
| rc = mdp3_ppp_verify_fmt(req); |
| rc |= mdp3_ppp_verify_res(req); |
| rc |= mdp3_ppp_verify_scale(req); |
| rc |= mdp3_ppp_verify_op(req); |
| |
| return rc; |
| } |
| |
| int mdp3_ppp_pipe_wait(void) |
| { |
| int ret = 1; |
| |
| /* |
| * wait 200 ms for ppp operation to complete before declaring |
| * the MDP hung |
| */ |
| ret = wait_for_completion_timeout( |
| &ppp_stat->ppp_comp, msecs_to_jiffies(200)); |
| if (!ret) |
| pr_err("%s: Timed out waiting for the MDP.\n", |
| __func__); |
| |
| return ret; |
| } |
| |
| uint32_t mdp3_calc_tpval(struct ppp_img_desc *img, uint32_t old_tp) |
| { |
| uint32_t tpVal; |
| uint8_t plane_tp; |
| |
| tpVal = 0; |
| if ((img->color_fmt == MDP_RGB_565) |
| || (img->color_fmt == MDP_BGR_565)) { |
| /* transparent color conversion into 24 bpp */ |
| plane_tp = (uint8_t) ((old_tp & 0xF800) >> 11); |
| tpVal |= ((plane_tp << 3) | ((plane_tp & 0x1C) >> 2)) << 16; |
| plane_tp = (uint8_t) (old_tp & 0x1F); |
| tpVal |= ((plane_tp << 3) | ((plane_tp & 0x1C) >> 2)) << 8; |
| |
| plane_tp = (uint8_t) ((old_tp & 0x7E0) >> 5); |
| tpVal |= ((plane_tp << 2) | ((plane_tp & 0x30) >> 4)); |
| } else { |
| /* 24bit RGB to RBG conversion */ |
| tpVal = (old_tp & 0xFF00) >> 8; |
| tpVal |= (old_tp & 0xFF) << 8; |
| tpVal |= (old_tp & 0xFF0000); |
| } |
| |
| return tpVal; |
| } |
| |
| static void mdp3_ppp_intr_handler(int type, void *arg) |
| { |
| complete(&ppp_stat->ppp_comp); |
| } |
| |
| static int mdp3_ppp_callback_setup(void) |
| { |
| int rc; |
| struct mdp3_intr_cb ppp_done_cb = { |
| .cb = mdp3_ppp_intr_handler, |
| .data = NULL, |
| }; |
| |
| rc = mdp3_set_intr_callback(MDP3_PPP_DONE, &ppp_done_cb); |
| return rc; |
| } |
| |
| void mdp3_ppp_kickoff(void) |
| { |
| init_completion(&ppp_stat->ppp_comp); |
| mdp3_irq_enable(MDP3_PPP_DONE); |
| ppp_enable(); |
| ATRACE_BEGIN("mdp3_wait_for_ppp_comp"); |
| mdp3_ppp_pipe_wait(); |
| ATRACE_END("mdp3_wait_for_ppp_comp"); |
| mdp3_irq_disable(MDP3_PPP_DONE); |
| } |
| |
| struct bpp_info { |
| int bpp_num; |
| int bpp_den; |
| int bpp_pln; |
| }; |
| |
| int mdp3_get_bpp_info(int format, struct bpp_info *bpp) |
| { |
| int rc = 0; |
| |
| switch (format) { |
| case MDP_RGB_565: |
| case MDP_BGR_565: |
| bpp->bpp_num = 2; |
| bpp->bpp_den = 1; |
| bpp->bpp_pln = 2; |
| break; |
| case MDP_RGB_888: |
| case MDP_BGR_888: |
| bpp->bpp_num = 3; |
| bpp->bpp_den = 1; |
| bpp->bpp_pln = 3; |
| break; |
| case MDP_BGRA_8888: |
| case MDP_RGBA_8888: |
| case MDP_ARGB_8888: |
| case MDP_XRGB_8888: |
| case MDP_RGBX_8888: |
| case MDP_BGRX_8888: |
| bpp->bpp_num = 4; |
| bpp->bpp_den = 1; |
| bpp->bpp_pln = 4; |
| break; |
| case MDP_Y_CRCB_H2V2: |
| case MDP_Y_CBCR_H2V2: |
| case MDP_Y_CBCR_H2V2_ADRENO: |
| case MDP_Y_CBCR_H2V2_VENUS: |
| bpp->bpp_num = 3; |
| bpp->bpp_den = 2; |
| bpp->bpp_pln = 1; |
| break; |
| case MDP_Y_CBCR_H2V1: |
| case MDP_Y_CRCB_H2V1: |
| bpp->bpp_num = 2; |
| bpp->bpp_den = 1; |
| bpp->bpp_pln = 1; |
| break; |
| case MDP_YCRYCB_H2V1: |
| bpp->bpp_num = 2; |
| bpp->bpp_den = 1; |
| bpp->bpp_pln = 2; |
| break; |
| default: |
| rc = -EINVAL; |
| } |
| return rc; |
| } |
| |
| bool mdp3_is_blend(struct mdp_blit_req *req) |
| { |
| if ((req->transp_mask != MDP_TRANSP_NOP) || |
| (req->alpha < MDP_ALPHA_NOP) || |
| (req->src.format == MDP_ARGB_8888) || |
| (req->src.format == MDP_BGRA_8888) || |
| (req->src.format == MDP_RGBA_8888)) |
| return true; |
| return false; |
| } |
| |
| bool mdp3_is_scale(struct mdp_blit_req *req) |
| { |
| if (req->flags & MDP_ROT_90) { |
| if (req->src_rect.w != req->dst_rect.h || |
| req->src_rect.h != req->dst_rect.w) |
| return true; |
| } else { |
| if (req->src_rect.h != req->dst_rect.h || |
| req->src_rect.w != req->dst_rect.w) |
| return true; |
| } |
| return false; |
| } |
| |
| u32 mdp3_clk_calc(struct msm_fb_data_type *mfd, |
| struct blit_req_list *lreq, u32 fps) |
| { |
| int i, lcount = 0; |
| struct mdp_blit_req *req; |
| u64 mdp_clk_rate = 0; |
| u32 scale_x = 0, scale_y = 0, scale = 0; |
| u32 blend_l, csc_l; |
| |
| lcount = lreq->count; |
| |
| blend_l = 100 * BLEND_LATENCY; |
| csc_l = 100 * CSC_LATENCY; |
| |
| for (i = 0; i < lcount; i++) { |
| req = &(lreq->req_list[i]); |
| |
| if (req->flags & MDP_SMART_BLIT) |
| continue; |
| |
| if (mdp3_is_scale(req)) { |
| if (req->flags & MDP_ROT_90) { |
| scale_x = 100 * req->src_rect.h / |
| req->dst_rect.w; |
| scale_y = 100 * req->src_rect.w / |
| req->dst_rect.h; |
| } else { |
| scale_x = 100 * req->src_rect.w / |
| req->dst_rect.w; |
| scale_y = 100 * req->src_rect.h / |
| req->dst_rect.h; |
| } |
| scale = max(scale_x, scale_y); |
| } |
| scale = scale >= 100 ? scale : 100; |
| if (mdp3_is_blend(req)) |
| scale = max(scale, blend_l); |
| |
| if (!check_if_rgb(req->src.format)) |
| scale = max(scale, csc_l); |
| |
| mdp_clk_rate += (req->src_rect.w * req->src_rect.h * |
| scale / 100) * fps; |
| } |
| mdp_clk_rate += (ppp_res.solid_fill_pixel * fps); |
| mdp_clk_rate = fudge_factor(mdp_clk_rate, |
| CLK_FUDGE_NUM, CLK_FUDGE_DEN); |
| pr_debug("mdp_clk_rate for ppp = %llu\n", mdp_clk_rate); |
| mdp_clk_rate = mdp3_clk_round_off(mdp_clk_rate); |
| |
| return mdp_clk_rate; |
| } |
| |
| u64 mdp3_adjust_scale_factor(struct mdp_blit_req *req, u32 bw_req, int bpp) |
| { |
| int src_h, src_w; |
| int dst_h, dst_w; |
| |
| src_h = req->src_rect.h; |
| src_w = req->src_rect.w; |
| |
| dst_h = req->dst_rect.h; |
| dst_w = req->dst_rect.w; |
| |
| if ((!(req->flags & MDP_ROT_90) && src_h == dst_h && |
| src_w == dst_w) || ((req->flags & MDP_ROT_90) && |
| src_h == dst_w && src_w == dst_h)) |
| return bw_req; |
| |
| bw_req = (bw_req + (bw_req * dst_h) / (4 * src_h)); |
| bw_req = (bw_req + (bw_req * dst_w) / (4 * src_w) + |
| (bw_req * dst_w) / (bpp * src_w)); |
| return bw_req; |
| } |
| |
| int mdp3_calc_ppp_res(struct msm_fb_data_type *mfd, |
| struct blit_req_list *lreq) |
| { |
| struct mdss_panel_info *panel_info = mfd->panel_info; |
| int i, lcount = 0; |
| struct mdp_blit_req *req; |
| struct bpp_info bpp; |
| u64 old_solid_fill_pixel = 0; |
| u64 new_solid_fill_pixel = 0; |
| u64 src_read_bw = 0; |
| u32 bg_read_bw = 0; |
| u32 dst_write_bw = 0; |
| u64 honest_ppp_ab = 0; |
| u32 fps = 0; |
| int smart_blit_fg_indx = -1; |
| u32 smart_blit_bg_read_bw = 0; |
| |
| ATRACE_BEGIN(__func__); |
| lcount = lreq->count; |
| if (lcount == 0) { |
| pr_err("Blit with request count 0, continue to recover!!!\n"); |
| ATRACE_END(__func__); |
| return 0; |
| } |
| if (lreq->req_list[0].flags & MDP_SOLID_FILL) { |
| req = &(lreq->req_list[0]); |
| mdp3_get_bpp_info(req->dst.format, &bpp); |
| old_solid_fill_pixel = ppp_res.solid_fill_pixel; |
| new_solid_fill_pixel = req->dst_rect.w * req->dst_rect.h; |
| ppp_res.solid_fill_pixel += new_solid_fill_pixel; |
| ppp_res.solid_fill_byte += req->dst_rect.w * req->dst_rect.h * |
| bpp.bpp_num / bpp.bpp_den; |
| if ((old_solid_fill_pixel >= new_solid_fill_pixel) || |
| (mdp3_res->solid_fill_vote_en)) { |
| pr_debug("Last fill pixels are higher or fill_en %d\n", |
| mdp3_res->solid_fill_vote_en); |
| ATRACE_END(__func__); |
| return 0; |
| } |
| } |
| |
| for (i = 0; i < lcount; i++) { |
| /* Set Smart blit flag before BW calculation */ |
| is_blit_optimization_possible(lreq, i); |
| req = &(lreq->req_list[i]); |
| |
| if (req->fps > 0 && req->fps <= panel_info->mipi.frame_rate) { |
| if (fps == 0) |
| fps = req->fps; |
| else |
| fps = panel_info->mipi.frame_rate; |
| } |
| |
| mdp3_get_bpp_info(req->src.format, &bpp); |
| if (lreq->req_list[i].flags & MDP_SMART_BLIT) { |
| /* |
| * Flag for smart blit FG layer index |
| * If blit request at index "n" has |
| * MDP_SMART_BLIT flag set then it will be used as BG |
| * layer in smart blit and request at index "n+1" |
| * will be used as FG layer |
| */ |
| smart_blit_fg_indx = i + 1; |
| bg_read_bw = req->src_rect.w * req->src_rect.h * |
| bpp.bpp_num / bpp.bpp_den; |
| bg_read_bw = mdp3_adjust_scale_factor(req, |
| bg_read_bw, bpp.bpp_pln); |
| /* Cache read BW of smart blit BG layer */ |
| smart_blit_bg_read_bw = bg_read_bw; |
| } else { |
| src_read_bw = req->src_rect.w * req->src_rect.h * |
| bpp.bpp_num / bpp.bpp_den; |
| src_read_bw = mdp3_adjust_scale_factor(req, |
| src_read_bw, bpp.bpp_pln); |
| if (!(check_if_rgb(req->src.format))) { |
| src_read_bw = fudge_factor(src_read_bw, |
| YUV_BW_FUDGE_NUM, |
| YUV_BW_FUDGE_DEN); |
| } |
| mdp3_get_bpp_info(req->dst.format, &bpp); |
| |
| if (smart_blit_fg_indx == i) { |
| bg_read_bw = smart_blit_bg_read_bw; |
| smart_blit_fg_indx = -1; |
| } else { |
| if ((req->transp_mask != MDP_TRANSP_NOP) || |
| (req->alpha < MDP_ALPHA_NOP) || |
| (req->src.format == MDP_ARGB_8888) || |
| (req->src.format == MDP_BGRA_8888) || |
| (req->src.format == MDP_RGBA_8888)) { |
| bg_read_bw = req->dst_rect.w * |
| req->dst_rect.h * |
| bpp.bpp_num / bpp.bpp_den; |
| bg_read_bw = mdp3_adjust_scale_factor( |
| req, bg_read_bw, |
| bpp.bpp_pln); |
| } else { |
| bg_read_bw = 0; |
| } |
| } |
| dst_write_bw = req->dst_rect.w * req->dst_rect.h * |
| bpp.bpp_num / bpp.bpp_den; |
| honest_ppp_ab += (src_read_bw + bg_read_bw + |
| dst_write_bw); |
| } |
| } |
| |
| if (fps == 0) |
| fps = panel_info->mipi.frame_rate; |
| |
| if (lreq->req_list[0].flags & MDP_SOLID_FILL) { |
| honest_ppp_ab = ppp_res.solid_fill_byte * 4; |
| pr_debug("solid fill honest_ppp_ab %llu\n", honest_ppp_ab); |
| } else { |
| honest_ppp_ab += ppp_res.solid_fill_byte; |
| mdp3_res->solid_fill_vote_en = true; |
| } |
| |
| honest_ppp_ab = honest_ppp_ab * fps; |
| if (honest_ppp_ab != ppp_res.next_ab) { |
| ppp_res.next_ab = honest_ppp_ab; |
| ppp_res.next_ib = honest_ppp_ab; |
| ppp_stat->bw_update = true; |
| pr_debug("solid fill ab = %llx, total ab = %llx ", |
| (ppp_res.solid_fill_byte * fps), honest_ppp_ab); |
| pr_debug("(%d fps) Solid_fill_vote %d\n", |
| fps, mdp3_res->solid_fill_vote_en); |
| ATRACE_INT("mdp3_ppp_bus_quota", honest_ppp_ab); |
| } |
| ppp_res.clk_rate = mdp3_clk_calc(mfd, lreq, fps); |
| ATRACE_INT("mdp3_ppp_clk_rate", ppp_res.clk_rate); |
| ATRACE_END(__func__); |
| return 0; |
| } |
| |
| int mdp3_ppp_turnon(struct msm_fb_data_type *mfd, int on_off) |
| { |
| uint64_t ab = 0, ib = 0; |
| int rate = 0; |
| int rc; |
| |
| if (on_off) { |
| rate = ppp_res.clk_rate; |
| ab = ppp_res.next_ab; |
| ib = ppp_res.next_ib; |
| } |
| mdp3_clk_set_rate(MDP3_CLK_MDP_SRC, rate, MDP3_CLIENT_PPP); |
| rc = mdp3_res_update(on_off, 0, MDP3_CLIENT_PPP); |
| if (rc < 0) { |
| pr_err("%s: mdp3_clk_enable failed\n", __func__); |
| return rc; |
| } |
| rc = mdp3_bus_scale_set_quota(MDP3_CLIENT_PPP, ab, ib); |
| if (rc < 0) { |
| mdp3_res_update(!on_off, 0, MDP3_CLIENT_PPP); |
| pr_err("%s: scale_set_quota failed\n", __func__); |
| return rc; |
| } |
| ppp_stat->bw_on = on_off; |
| ppp_stat->mdp_clk = MDP_CORE_CLK_RATE_SVS; |
| ppp_stat->bw_update = false; |
| return 0; |
| } |
| |
| void mdp3_start_ppp(struct ppp_blit_op *blit_op) |
| { |
| /* Wait for the pipe to clear */ |
| if (MDP3_REG_READ(MDP3_REG_DISPLAY_STATUS) & |
| MDP3_PPP_ACTIVE) { |
| pr_err("ppp core is hung up on previous request\n"); |
| return; |
| } |
| config_ppp_op_mode(blit_op); |
| if (blit_op->solid_fill) { |
| MDP3_REG_WRITE(0x10138, 0x10000000); |
| MDP3_REG_WRITE(0x1014c, 0xffffffff); |
| MDP3_REG_WRITE(0x101b8, 0); |
| MDP3_REG_WRITE(0x101bc, 0); |
| MDP3_REG_WRITE(0x1013c, 0); |
| MDP3_REG_WRITE(0x10140, 0); |
| MDP3_REG_WRITE(0x10144, 0); |
| MDP3_REG_WRITE(0x10148, 0); |
| MDP3_REG_WRITE(MDP3_TFETCH_FILL_COLOR, |
| blit_op->solid_fill_color); |
| MDP3_REG_WRITE(MDP3_TFETCH_SOLID_FILL, |
| ENABLE_SOLID_FILL); |
| } else { |
| MDP3_REG_WRITE(MDP3_TFETCH_SOLID_FILL, |
| DISABLE_SOLID_FILL); |
| } |
| /* Skip PPP kickoff for SMART_BLIT BG layer */ |
| if (blit_op->mdp_op & MDPOP_SMART_BLIT) |
| pr_debug("Skip mdp3_ppp_kickoff\n"); |
| else |
| mdp3_ppp_kickoff(); |
| |
| if (!(blit_op->solid_fill)) { |
| ppp_res.solid_fill_pixel = 0; |
| ppp_res.solid_fill_byte = 0; |
| } |
| } |
| |
| static int solid_fill_workaround(struct mdp_blit_req *req, |
| struct ppp_blit_op *blit_op) |
| { |
| /* Make width 2 when there is a solid fill of width 1, and make |
| * sure width does not become zero while trying to avoid odd width |
| */ |
| if (blit_op->dst.roi.width == 1) { |
| if (req->dst_rect.x + 2 > req->dst.width) { |
| pr_err("%s: Unable to handle solid fill of width 1", |
| __func__); |
| return -EINVAL; |
| } |
| blit_op->dst.roi.width = 2; |
| } |
| if (blit_op->src.roi.width == 1) { |
| if (req->src_rect.x + 2 > req->src.width) { |
| pr_err("%s: Unable to handle solid fill of width 1", |
| __func__); |
| return -EINVAL; |
| } |
| blit_op->src.roi.width = 2; |
| } |
| |
| /* Avoid odd width, as it could hang ppp during solid fill */ |
| blit_op->dst.roi.width = (blit_op->dst.roi.width / 2) * 2; |
| blit_op->src.roi.width = (blit_op->src.roi.width / 2) * 2; |
| |
| /* Set src format to RGBX, to avoid ppp hang issues */ |
| blit_op->src.color_fmt = MDP_RGBX_8888; |
| |
| /* Avoid RGBA format, as it could hang ppp during solid fill */ |
| if (blit_op->dst.color_fmt == MDP_RGBA_8888) |
| blit_op->dst.color_fmt = MDP_RGBX_8888; |
| return 0; |
| } |
| |
| static int mdp3_ppp_process_req(struct ppp_blit_op *blit_op, |
| struct mdp_blit_req *req, struct mdp3_img_data *src_data, |
| struct mdp3_img_data *dst_data) |
| { |
| unsigned long srcp0_start, srcp0_len, dst_start, dst_len; |
| uint32_t dst_width, dst_height; |
| int ret = 0; |
| |
| srcp0_start = (unsigned long) src_data->addr; |
| srcp0_len = (unsigned long) src_data->len; |
| dst_start = (unsigned long) dst_data->addr; |
| dst_len = (unsigned long) dst_data->len; |
| |
| blit_op->dst.prop.width = req->dst.width; |
| blit_op->dst.prop.height = req->dst.height; |
| |
| blit_op->dst.color_fmt = req->dst.format; |
| blit_op->dst.p0 = (void *) dst_start; |
| blit_op->dst.p0 += req->dst.offset; |
| |
| blit_op->dst.roi.x = req->dst_rect.x; |
| blit_op->dst.roi.y = req->dst_rect.y; |
| blit_op->dst.roi.width = req->dst_rect.w; |
| blit_op->dst.roi.height = req->dst_rect.h; |
| |
| blit_op->src.roi.x = req->src_rect.x; |
| blit_op->src.roi.y = req->src_rect.y; |
| blit_op->src.roi.width = req->src_rect.w; |
| blit_op->src.roi.height = req->src_rect.h; |
| |
| blit_op->src.prop.width = req->src.width; |
| blit_op->src.prop.height = req->src.height; |
| blit_op->src.color_fmt = req->src.format; |
| |
| |
| blit_op->src.p0 = (void *) (srcp0_start + req->src.offset); |
| if (blit_op->src.color_fmt == MDP_Y_CBCR_H2V2_ADRENO) |
| blit_op->src.p1 = |
| (void *) ((uint32_t) blit_op->src.p0 + |
| ALIGN((ALIGN(req->src.width, 32) * |
| ALIGN(req->src.height, 32)), 4096)); |
| else if (blit_op->src.color_fmt == MDP_Y_CBCR_H2V2_VENUS) |
| blit_op->src.p1 = |
| (void *) ((uint32_t) blit_op->src.p0 + |
| ALIGN((ALIGN(req->src.width, 128) * |
| ALIGN(req->src.height, 32)), 4096)); |
| else |
| blit_op->src.p1 = (void *) ((uint32_t) blit_op->src.p0 + |
| req->src.width * req->src.height); |
| |
| if (req->flags & MDP_IS_FG) |
| blit_op->mdp_op |= MDPOP_LAYER_IS_FG; |
| |
| /* blending check */ |
| if (req->transp_mask != MDP_TRANSP_NOP) { |
| blit_op->mdp_op |= MDPOP_TRANSP; |
| blit_op->blend.trans_color = |
| mdp3_calc_tpval(&blit_op->src, req->transp_mask); |
| } else { |
| blit_op->blend.trans_color = 0; |
| } |
| |
| req->alpha &= 0xff; |
| if (req->alpha < MDP_ALPHA_NOP) { |
| blit_op->mdp_op |= MDPOP_ALPHAB; |
| blit_op->blend.const_alpha = req->alpha; |
| } else { |
| blit_op->blend.const_alpha = 0xff; |
| } |
| |
| /* rotation check */ |
| if (req->flags & MDP_FLIP_LR) |
| blit_op->mdp_op |= MDPOP_LR; |
| if (req->flags & MDP_FLIP_UD) |
| blit_op->mdp_op |= MDPOP_UD; |
| if (req->flags & MDP_ROT_90) |
| blit_op->mdp_op |= MDPOP_ROT90; |
| if (req->flags & MDP_DITHER) |
| blit_op->mdp_op |= MDPOP_DITHER; |
| |
| if (req->flags & MDP_BLEND_FG_PREMULT) |
| blit_op->mdp_op |= MDPOP_FG_PM_ALPHA; |
| |
| /* scale check */ |
| if (req->flags & MDP_ROT_90) { |
| dst_width = req->dst_rect.h; |
| dst_height = req->dst_rect.w; |
| } else { |
| dst_width = req->dst_rect.w; |
| dst_height = req->dst_rect.h; |
| } |
| |
| if ((blit_op->src.roi.width != dst_width) || |
| (blit_op->src.roi.height != dst_height)) |
| blit_op->mdp_op |= MDPOP_ASCALE; |
| |
| if (req->flags & MDP_BLUR) |
| blit_op->mdp_op |= MDPOP_ASCALE | MDPOP_BLUR; |
| |
| if (req->flags & MDP_SOLID_FILL) { |
| ret = solid_fill_workaround(req, blit_op); |
| if (ret) |
| return ret; |
| |
| blit_op->solid_fill_color = (req->const_color.g & 0xFF)| |
| (req->const_color.r & 0xFF) << 8 | |
| (req->const_color.b & 0xFF) << 16 | |
| (req->const_color.alpha & 0xFF) << 24; |
| blit_op->solid_fill = true; |
| } else { |
| blit_op->solid_fill = false; |
| } |
| |
| if (req->flags & MDP_SMART_BLIT) |
| blit_op->mdp_op |= MDPOP_SMART_BLIT; |
| |
| return ret; |
| } |
| |
| static void mdp3_ppp_tile_workaround(struct ppp_blit_op *blit_op, |
| struct mdp_blit_req *req) |
| { |
| int dst_h, src_w, i; |
| uint32_t mdp_op = blit_op->mdp_op; |
| void *src_p0 = blit_op->src.p0; |
| void *src_p1 = blit_op->src.p1; |
| void *dst_p0 = blit_op->dst.p0; |
| |
| src_w = req->src_rect.w; |
| dst_h = blit_op->dst.roi.height; |
| /* bg tile fetching HW workaround */ |
| for (i = 0; i < (req->dst_rect.h / 16); i++) { |
| /* this tile size */ |
| blit_op->dst.roi.height = 16; |
| blit_op->src.roi.width = |
| (16 * req->src_rect.w) / req->dst_rect.h; |
| |
| /* if it's out of scale range... */ |
| if (((MDP_SCALE_Q_FACTOR * blit_op->dst.roi.height) / |
| blit_op->src.roi.width) > MDP_MAX_X_SCALE_FACTOR) |
| blit_op->src.roi.width = |
| (MDP_SCALE_Q_FACTOR * |
| blit_op->dst.roi.height) / |
| MDP_MAX_X_SCALE_FACTOR; |
| else if (((MDP_SCALE_Q_FACTOR * blit_op->dst.roi.height) / |
| blit_op->src.roi.width) < MDP_MIN_X_SCALE_FACTOR) |
| blit_op->src.roi.width = |
| (MDP_SCALE_Q_FACTOR * |
| blit_op->dst.roi.height) / |
| MDP_MIN_X_SCALE_FACTOR; |
| |
| mdp3_start_ppp(blit_op); |
| |
| /* next tile location */ |
| blit_op->dst.roi.y += 16; |
| blit_op->src.roi.x += blit_op->src.roi.width; |
| |
| /* this is for a remainder update */ |
| dst_h -= 16; |
| src_w -= blit_op->src.roi.width; |
| /* restore parameters that may have been overwritten */ |
| blit_op->mdp_op = mdp_op; |
| blit_op->src.p0 = src_p0; |
| blit_op->src.p1 = src_p1; |
| blit_op->dst.p0 = dst_p0; |
| } |
| |
| if ((dst_h < 0) || (src_w < 0)) |
| pr_err("msm_fb: mdp_blt_ex() unexpected result! line:%d\n", |
| __LINE__); |
| |
| /* remainder update */ |
| if ((dst_h > 0) && (src_w > 0)) { |
| u32 tmp_v; |
| |
| blit_op->dst.roi.height = dst_h; |
| blit_op->src.roi.width = src_w; |
| |
| if (((MDP_SCALE_Q_FACTOR * blit_op->dst.roi.height) / |
| blit_op->src.roi.width) > MDP_MAX_X_SCALE_FACTOR) { |
| tmp_v = (MDP_SCALE_Q_FACTOR * |
| blit_op->dst.roi.height) / |
| MDP_MAX_X_SCALE_FACTOR + |
| ((MDP_SCALE_Q_FACTOR * |
| blit_op->dst.roi.height) % |
| MDP_MAX_X_SCALE_FACTOR ? 1 : 0); |
| |
| /* move x location as roi width gets bigger */ |
| blit_op->src.roi.x -= tmp_v - blit_op->src.roi.width; |
| blit_op->src.roi.width = tmp_v; |
| } else if (((MDP_SCALE_Q_FACTOR * blit_op->dst.roi.height) / |
| blit_op->src.roi.width) < MDP_MIN_X_SCALE_FACTOR) { |
| tmp_v = (MDP_SCALE_Q_FACTOR * |
| blit_op->dst.roi.height) / |
| MDP_MIN_X_SCALE_FACTOR + |
| ((MDP_SCALE_Q_FACTOR * |
| blit_op->dst.roi.height) % |
| MDP_MIN_X_SCALE_FACTOR ? 1 : 0); |
| /* |
| * we don't move x location for continuity of |
| * source image |
| */ |
| blit_op->src.roi.width = tmp_v; |
| } |
| |
| |
| mdp3_start_ppp(blit_op); |
| } |
| } |
| |
| static int mdp3_ppp_blit(struct msm_fb_data_type *mfd, |
| struct mdp_blit_req *req, struct mdp3_img_data *src_data, |
| struct mdp3_img_data *dst_data) |
| { |
| struct ppp_blit_op blit_op; |
| int ret = 0; |
| |
| memset(&blit_op, 0, sizeof(blit_op)); |
| |
| if (req->dst.format == MDP_FB_FORMAT) |
| req->dst.format = mfd->fb_imgType; |
| if (req->src.format == MDP_FB_FORMAT) |
| req->src.format = mfd->fb_imgType; |
| |
| if (mdp3_ppp_verify_req(req)) { |
| pr_err("%s: invalid image!\n", __func__); |
| return -EINVAL; |
| } |
| |
| ret = mdp3_ppp_process_req(&blit_op, req, src_data, dst_data); |
| if (ret) { |
| pr_err("%s: Failed to process the blit request", __func__); |
| return ret; |
| } |
| |
| if (((blit_op.mdp_op & (MDPOP_TRANSP | MDPOP_ALPHAB)) || |
| (req->src.format == MDP_ARGB_8888) || |
| (req->src.format == MDP_BGRA_8888) || |
| (req->src.format == MDP_RGBA_8888)) && |
| (blit_op.mdp_op & MDPOP_ROT90) && (req->dst_rect.w <= 16)) { |
| mdp3_ppp_tile_workaround(&blit_op, req); |
| } else { |
| mdp3_start_ppp(&blit_op); |
| } |
| |
| return 0; |
| } |
| |
| static int mdp3_ppp_blit_workaround(struct msm_fb_data_type *mfd, |
| struct mdp_blit_req *req, unsigned int remainder, |
| struct mdp3_img_data *src_data, |
| struct mdp3_img_data *dst_data) |
| { |
| int ret; |
| struct mdp_blit_req splitreq; |
| int s_x_0, s_x_1, s_w_0, s_w_1, s_y_0, s_y_1, s_h_0, s_h_1; |
| int d_x_0, d_x_1, d_w_0, d_w_1, d_y_0, d_y_1, d_h_0, d_h_1; |
| |
| /* make new request as provide by user */ |
| splitreq = *req; |
| |
| /* break dest roi at width*/ |
| d_y_0 = d_y_1 = req->dst_rect.y; |
| d_h_0 = d_h_1 = req->dst_rect.h; |
| d_x_0 = req->dst_rect.x; |
| |
| if (remainder == 14 || remainder == 6) |
| d_w_1 = req->dst_rect.w / 2; |
| else |
| d_w_1 = (req->dst_rect.w - 1) / 2 - 1; |
| |
| d_w_0 = req->dst_rect.w - d_w_1; |
| d_x_1 = d_x_0 + d_w_0; |
| /* blit first region */ |
| if (((splitreq.flags & 0x07) == 0x07) || |
| ((splitreq.flags & 0x07) == 0x05) || |
| ((splitreq.flags & 0x07) == 0x02) || |
| ((splitreq.flags & 0x07) == 0x0)) { |
| |
| if (splitreq.flags & MDP_ROT_90) { |
| s_x_0 = s_x_1 = req->src_rect.x; |
| s_w_0 = s_w_1 = req->src_rect.w; |
| s_y_0 = req->src_rect.y; |
| s_h_1 = (req->src_rect.h * d_w_1) / |
| req->dst_rect.w; |
| s_h_0 = req->src_rect.h - s_h_1; |
| s_y_1 = s_y_0 + s_h_0; |
| if (d_w_1 >= 8 * s_h_1) { |
| s_h_1++; |
| s_y_1--; |
| } |
| } else { |
| s_y_0 = s_y_1 = req->src_rect.y; |
| s_h_0 = s_h_1 = req->src_rect.h; |
| s_x_0 = req->src_rect.x; |
| s_w_1 = (req->src_rect.w * d_w_1) / |
| req->dst_rect.w; |
| s_w_0 = req->src_rect.w - s_w_1; |
| s_x_1 = s_x_0 + s_w_0; |
| if (d_w_1 >= 8 * s_w_1) { |
| s_w_1++; |
| s_x_1--; |
| } |
| } |
| |
| splitreq.src_rect.h = s_h_0; |
| splitreq.src_rect.y = s_y_0; |
| splitreq.dst_rect.h = d_h_0; |
| splitreq.dst_rect.y = d_y_0; |
| splitreq.src_rect.x = s_x_0; |
| splitreq.src_rect.w = s_w_0; |
| splitreq.dst_rect.x = d_x_0; |
| splitreq.dst_rect.w = d_w_0; |
| } else { |
| if (splitreq.flags & MDP_ROT_90) { |
| s_x_0 = s_x_1 = req->src_rect.x; |
| s_w_0 = s_w_1 = req->src_rect.w; |
| s_y_0 = req->src_rect.y; |
| s_h_1 = (req->src_rect.h * d_w_0) / |
| req->dst_rect.w; |
| s_h_0 = req->src_rect.h - s_h_1; |
| s_y_1 = s_y_0 + s_h_0; |
| if (d_w_0 >= 8 * s_h_1) { |
| s_h_1++; |
| s_y_1--; |
| } |
| } else { |
| s_y_0 = s_y_1 = req->src_rect.y; |
| s_h_0 = s_h_1 = req->src_rect.h; |
| s_x_0 = req->src_rect.x; |
| s_w_1 = (req->src_rect.w * d_w_0) / |
| req->dst_rect.w; |
| s_w_0 = req->src_rect.w - s_w_1; |
| s_x_1 = s_x_0 + s_w_0; |
| if (d_w_0 >= 8 * s_w_1) { |
| s_w_1++; |
| s_x_1--; |
| } |
| } |
| splitreq.src_rect.h = s_h_0; |
| splitreq.src_rect.y = s_y_0; |
| splitreq.dst_rect.h = d_h_1; |
| splitreq.dst_rect.y = d_y_1; |
| splitreq.src_rect.x = s_x_0; |
| splitreq.src_rect.w = s_w_0; |
| splitreq.dst_rect.x = d_x_1; |
| splitreq.dst_rect.w = d_w_1; |
| } |
| |
| /* No need to split in height */ |
| ret = mdp3_ppp_blit(mfd, &splitreq, src_data, dst_data); |
| |
| if (ret) |
| return ret; |
| /* blit second region */ |
| if (((splitreq.flags & 0x07) == 0x07) || |
| ((splitreq.flags & 0x07) == 0x05) || |
| ((splitreq.flags & 0x07) == 0x02) || |
| ((splitreq.flags & 0x07) == 0x0)) { |
| splitreq.src_rect.h = s_h_1; |
| splitreq.src_rect.y = s_y_1; |
| splitreq.dst_rect.h = d_h_1; |
| splitreq.dst_rect.y = d_y_1; |
| splitreq.src_rect.x = s_x_1; |
| splitreq.src_rect.w = s_w_1; |
| splitreq.dst_rect.x = d_x_1; |
| splitreq.dst_rect.w = d_w_1; |
| } else { |
| splitreq.src_rect.h = s_h_1; |
| splitreq.src_rect.y = s_y_1; |
| splitreq.dst_rect.h = d_h_0; |
| splitreq.dst_rect.y = d_y_0; |
| splitreq.src_rect.x = s_x_1; |
| splitreq.src_rect.w = s_w_1; |
| splitreq.dst_rect.x = d_x_0; |
| splitreq.dst_rect.w = d_w_0; |
| } |
| |
| /* No need to split in height ... just width */ |
| return mdp3_ppp_blit(mfd, &splitreq, src_data, dst_data); |
| } |
| |
| int mdp3_ppp_start_blit(struct msm_fb_data_type *mfd, |
| struct mdp_blit_req *req, |
| struct mdp3_img_data *src_data, |
| struct mdp3_img_data *dst_data) |
| { |
| int ret; |
| unsigned int remainder = 0, is_bpp_4 = 0; |
| |
| if (unlikely(req->src_rect.h == 0 || req->src_rect.w == 0)) { |
| pr_err("mdp_ppp: src img of zero size!\n"); |
| return -EINVAL; |
| } |
| if (unlikely(req->dst_rect.h == 0 || req->dst_rect.w == 0)) |
| return 0; |
| |
| /* MDP width split workaround */ |
| remainder = (req->dst_rect.w) % 16; |
| ret = ppp_get_bpp(req->dst.format, mfd->fb_imgType); |
| if (ret <= 0) { |
| pr_err("mdp_ppp: incorrect bpp!\n"); |
| return -EINVAL; |
| } |
| is_bpp_4 = (ret == 4) ? 1 : 0; |
| |
| if ((is_bpp_4 && (remainder == 6 || remainder == 14)) && |
| !(req->flags & MDP_SOLID_FILL)) |
| ret = mdp3_ppp_blit_workaround(mfd, req, remainder, |
| src_data, dst_data); |
| else |
| ret = mdp3_ppp_blit(mfd, req, src_data, dst_data); |
| return ret; |
| } |
| |
| void mdp3_ppp_wait_for_fence(struct blit_req_list *req) |
| { |
| int i, ret = 0; |
| |
| ATRACE_BEGIN(__func__); |
| /* buf sync */ |
| for (i = 0; i < req->acq_fen_cnt; i++) { |
| ret = mdss_wait_sync_fence(req->acq_fen[i], |
| WAIT_FENCE_FINAL_TIMEOUT); |
| if (ret < 0) { |
| pr_err("%s: sync_fence_wait failed! ret = %x\n", |
| __func__, ret); |
| break; |
| } |
| mdss_put_sync_fence(req->acq_fen[i]); |
| } |
| ATRACE_END(__func__); |
| if (ret < 0) { |
| while (i < req->acq_fen_cnt) { |
| mdss_put_sync_fence(req->acq_fen[i]); |
| i++; |
| } |
| } |
| req->acq_fen_cnt = 0; |
| } |
| |
| void mdp3_ppp_signal_timeline(struct blit_req_list *req) |
| { |
| mdss_inc_timeline(ppp_stat->timeline, 1); |
| MDSS_XLOG(ppp_stat->timeline->value, ppp_stat->timeline_value); |
| req->last_rel_fence = req->cur_rel_fence; |
| req->cur_rel_fence = 0; |
| } |
| |
| |
| static void mdp3_ppp_deinit_buf_sync(struct blit_req_list *req) |
| { |
| int i; |
| |
| put_unused_fd(req->cur_rel_fen_fd); |
| mdss_put_sync_fence(req->cur_rel_fence); |
| req->cur_rel_fence = NULL; |
| req->cur_rel_fen_fd = 0; |
| ppp_stat->timeline_value--; |
| for (i = 0; i < req->acq_fen_cnt; i++) |
| mdss_put_sync_fence(req->acq_fen[i]); |
| req->acq_fen_cnt = 0; |
| } |
| |
| static int mdp3_ppp_handle_buf_sync(struct blit_req_list *req, |
| struct mdp_buf_sync *buf_sync) |
| { |
| int i, fence_cnt = 0, ret = 0; |
| int acq_fen_fd[MDP_MAX_FENCE_FD]; |
| struct mdss_fence *fence; |
| |
| if ((buf_sync->acq_fen_fd_cnt > MDP_MAX_FENCE_FD) || |
| (ppp_stat->timeline == NULL)) |
| return -EINVAL; |
| |
| if (buf_sync->acq_fen_fd_cnt) |
| ret = copy_from_user(acq_fen_fd, buf_sync->acq_fen_fd, |
| buf_sync->acq_fen_fd_cnt * sizeof(int)); |
| if (ret) { |
| pr_err("%s: copy_from_user failed\n", __func__); |
| return ret; |
| } |
| for (i = 0; i < buf_sync->acq_fen_fd_cnt; i++) { |
| fence = mdss_get_fd_sync_fence(acq_fen_fd[i]); |
| if (fence == NULL) { |
| pr_info("%s: null fence! i=%d fd=%d\n", __func__, i, |
| acq_fen_fd[i]); |
| ret = -EINVAL; |
| break; |
| } |
| req->acq_fen[i] = fence; |
| } |
| fence_cnt = i; |
| if (ret) |
| goto buf_sync_err_1; |
| req->acq_fen_cnt = fence_cnt; |
| if (buf_sync->flags & MDP_BUF_SYNC_FLAG_WAIT) |
| mdp3_ppp_wait_for_fence(req); |
| |
| MDSS_XLOG(ppp_stat->timeline_value); |
| |
| /* create fence */ |
| req->cur_rel_fence = mdss_get_sync_fence(ppp_stat->timeline, |
| "ppp_fence", NULL, ppp_stat->timeline_value++); |
| if (req->cur_rel_fence == NULL) { |
| req->cur_rel_sync_pt = NULL; |
| pr_err("%s: cannot create fence\n", __func__); |
| ret = -ENOMEM; |
| goto buf_sync_err_2; |
| } |
| /* create fd */ |
| return ret; |
| buf_sync_err_2: |
| ppp_stat->timeline_value--; |
| buf_sync_err_1: |
| for (i = 0; i < fence_cnt; i++) |
| mdss_put_sync_fence(req->acq_fen[i]); |
| req->acq_fen_cnt = 0; |
| return ret; |
| } |
| |
| void mdp3_ppp_req_push(struct blit_req_queue *req_q, struct blit_req_list *req) |
| { |
| int idx = req_q->push_idx; |
| |
| req_q->req[idx] = *req; |
| req_q->count++; |
| req_q->push_idx = (req_q->push_idx + 1) % MDP3_PPP_MAX_LIST_REQ; |
| } |
| |
| struct blit_req_list *mdp3_ppp_next_req(struct blit_req_queue *req_q) |
| { |
| struct blit_req_list *req; |
| |
| if (req_q->count == 0) |
| return NULL; |
| req = &req_q->req[req_q->pop_idx]; |
| return req; |
| } |
| |
| void mdp3_ppp_req_pop(struct blit_req_queue *req_q) |
| { |
| req_q->count--; |
| req_q->pop_idx = (req_q->pop_idx + 1) % MDP3_PPP_MAX_LIST_REQ; |
| } |
| |
| void mdp3_free_fw_timer_func(unsigned long arg) |
| { |
| mdp3_res->solid_fill_vote_en = false; |
| schedule_work(&ppp_stat->free_bw_work); |
| } |
| |
| static void mdp3_free_bw_wq_handler(struct work_struct *work) |
| { |
| struct msm_fb_data_type *mfd = ppp_stat->mfd; |
| |
| mutex_lock(&ppp_stat->config_ppp_mutex); |
| if (ppp_stat->bw_on) |
| mdp3_ppp_turnon(mfd, 0); |
| mutex_unlock(&ppp_stat->config_ppp_mutex); |
| } |
| |
| static bool is_hw_workaround_needed(struct mdp_blit_req req) |
| { |
| bool result = false; |
| bool is_bpp_4 = false; |
| uint32_t remainder = 0; |
| uint32_t bpp = ppp_get_bpp(req.dst.format, ppp_stat->mfd->fb_imgType); |
| |
| /* MDP width split workaround */ |
| remainder = (req.dst_rect.w) % 16; |
| is_bpp_4 = (bpp == 4) ? 1 : 0; |
| if ((is_bpp_4 && (remainder == 6 || remainder == 14)) && |
| !(req.flags & MDP_SOLID_FILL)) |
| result = true; |
| |
| /* bg tile fetching HW workaround */ |
| if (((req.alpha < MDP_ALPHA_NOP) || |
| (req.transp_mask != MDP_TRANSP_NOP) || |
| (req.src.format == MDP_ARGB_8888) || |
| (req.src.format == MDP_BGRA_8888) || |
| (req.src.format == MDP_RGBA_8888)) && |
| (req.flags & MDP_ROT_90) && (req.dst_rect.w <= 16)) |
| result = true; |
| |
| return result; |
| } |
| |
| static bool is_roi_equal(struct mdp_blit_req req0, |
| struct mdp_blit_req req1) |
| { |
| bool result = false; |
| struct mdss_panel_info *panel_info = ppp_stat->mfd->panel_info; |
| |
| /* |
| * Check req0 and req1 layer destination ROI and return true if |
| * they are equal. |
| */ |
| if ((req0.dst_rect.x == req1.dst_rect.x) && |
| (req0.dst_rect.y == req1.dst_rect.y) && |
| (req0.dst_rect.w == req1.dst_rect.w) && |
| (req0.dst_rect.h == req1.dst_rect.h)) |
| result = true; |
| /* |
| * Layers are source cropped and cropped layer width and hight are |
| * same panel width and height |
| */ |
| else if ((req0.dst_rect.w == req1.dst_rect.w) && |
| (req0.dst_rect.h == req1.dst_rect.h) && |
| (req0.dst_rect.w == panel_info->xres) && |
| (req0.dst_rect.h == panel_info->yres)) |
| result = true; |
| |
| return result; |
| } |
| |
| static bool is_scaling_needed(struct mdp_blit_req req) |
| { |
| bool result = true; |
| |
| /* Return true if layer need scaling else return false */ |
| if ((req.src_rect.w == req.dst_rect.w) && |
| (req.src_rect.h == req.dst_rect.h)) |
| result = false; |
| return result; |
| } |
| |
| static bool is_blit_optimization_possible(struct blit_req_list *req, int indx) |
| { |
| int next = indx + 1; |
| bool status = false; |
| struct mdp3_img_data tmp_data; |
| bool dst_roi_equal = false; |
| bool hw_woraround_active = false; |
| struct mdp_blit_req bg_req; |
| struct mdp_blit_req fg_req; |
| |
| if (!(mdp3_res->smart_blit_en)) { |
| pr_debug("Smart BLIT disabled from sysfs\n"); |
| return status; |
| } |
| if (next < req->count) { |
| bg_req = req->req_list[indx]; |
| fg_req = req->req_list[next]; |
| hw_woraround_active = is_hw_workaround_needed(bg_req); |
| dst_roi_equal = is_roi_equal(bg_req, fg_req); |
| /* |
| * Check userspace Smart BLIT Flag for current and next |
| * request Flag for smart blit FG layer index If blit |
| * request at index "n" has MDP_SMART_BLIT flag set then |
| * it will be used as BG layer in smart blit |
| * and request at index "n+1" will be used as FG layer |
| */ |
| if ((bg_req.flags & MDP_SMART_BLIT) && |
| (!(fg_req.flags & MDP_SMART_BLIT)) && |
| (!(hw_woraround_active))) |
| status = true; |
| /* |
| * Enable SMART blit between request 0(BG) & request 1(FG) when |
| * destination ROI of BG and FG layer are same, |
| * No scaling on BG layer |
| * No rotation on BG Layer. |
| * BG Layer color format is RGB and marked as MDP_IS_FG. |
| */ |
| else if ((mdp3_res->smart_blit_en & SMART_BLIT_RGB_EN) && |
| (indx == 0) && (dst_roi_equal) && |
| (bg_req.flags & MDP_IS_FG) && |
| (!(is_scaling_needed(bg_req))) && |
| (!(bg_req.flags & (MDP_ROT_90))) && |
| (check_if_rgb(bg_req.src.format)) && |
| (!(hw_woraround_active))) { |
| status = true; |
| req->req_list[indx].flags |= MDP_SMART_BLIT; |
| pr_debug("Optimize RGB Blit for Req Indx %d\n", indx); |
| } |
| /* |
| * Swap BG and FG layer to enable SMART blit between request |
| * 0(BG) & request 1(FG) when destination ROI of BG and FG |
| * layer are same, No scaling on FG and BG layer |
| * No rotation on FG Layer. BG Layer color format is YUV |
| */ |
| else if ((indx == 0) && |
| (mdp3_res->smart_blit_en & SMART_BLIT_YUV_EN) && |
| (!(fg_req.flags & (MDP_ROT_90))) && (dst_roi_equal) && |
| (!(check_if_rgb(bg_req.src.format))) && |
| (!(hw_woraround_active))) { |
| /* |
| * swap blit requests at index 0 and 1. YUV layer at |
| * index 0 is replaced with UI layer request present |
| * at index 1. Since UI layer will be in background |
| * set IS_FG flag and clear it from YUV layer flags |
| */ |
| if (!(is_scaling_needed(req->req_list[next]))) { |
| if (bg_req.flags & MDP_IS_FG) { |
| req->req_list[indx].flags &= |
| ~MDP_IS_FG; |
| req->req_list[next].flags |= MDP_IS_FG; |
| } |
| bg_req = req->req_list[next]; |
| req->req_list[next] = req->req_list[indx]; |
| req->req_list[indx] = bg_req; |
| |
| tmp_data = req->src_data[next]; |
| req->src_data[next] = req->src_data[indx]; |
| req->src_data[indx] = tmp_data; |
| |
| tmp_data = req->dst_data[next]; |
| req->dst_data[next] = req->dst_data[indx]; |
| req->dst_data[indx] = tmp_data; |
| status = true; |
| req->req_list[indx].flags |= MDP_SMART_BLIT; |
| pr_debug("Optimize YUV Blit for Req Indx %d\n", |
| indx); |
| } |
| } |
| } |
| return status; |
| } |
| |
| static void mdp3_ppp_blit_handler(struct kthread_work *work) |
| { |
| struct msm_fb_data_type *mfd = ppp_stat->mfd; |
| struct blit_req_list *req; |
| int i, rc = 0; |
| bool smart_blit = false; |
| int smart_blit_fg_index = -1; |
| |
| mutex_lock(&ppp_stat->config_ppp_mutex); |
| req = mdp3_ppp_next_req(&ppp_stat->req_q); |
| if (!req) { |
| mutex_unlock(&ppp_stat->config_ppp_mutex); |
| return; |
| } |
| |
| if (!ppp_stat->bw_on) { |
| mdp3_ppp_turnon(mfd, 1); |
| if (rc < 0) { |
| mutex_unlock(&ppp_stat->config_ppp_mutex); |
| pr_err("%s: Enable ppp resources failed\n", __func__); |
| return; |
| } |
| } |
| while (req) { |
| mdp3_ppp_wait_for_fence(req); |
| mdp3_calc_ppp_res(mfd, req); |
| if (ppp_res.clk_rate != ppp_stat->mdp_clk) { |
| ppp_stat->mdp_clk = ppp_res.clk_rate; |
| mdp3_clk_set_rate(MDP3_CLK_MDP_SRC, |
| ppp_stat->mdp_clk, MDP3_CLIENT_PPP); |
| } |
| if (ppp_stat->bw_update) { |
| rc = mdp3_bus_scale_set_quota(MDP3_CLIENT_PPP, |
| ppp_res.next_ab, ppp_res.next_ib); |
| if (rc < 0) { |
| pr_err("%s: bw set quota failed\n", __func__); |
| return; |
| } |
| ppp_stat->bw_update = false; |
| } |
| ATRACE_BEGIN("mpd3_ppp_start"); |
| for (i = 0; i < req->count; i++) { |
| smart_blit = is_blit_optimization_possible(req, i); |
| if (smart_blit) |
| /* |
| * Blit request index of FG layer in |
| * smart blit |
| */ |
| smart_blit_fg_index = i + 1; |
| if (!(req->req_list[i].flags & MDP_NO_BLIT)) { |
| /* Do the actual blit. */ |
| if (!rc) { |
| rc = mdp3_ppp_start_blit(mfd, |
| &(req->req_list[i]), |
| &req->src_data[i], |
| &req->dst_data[i]); |
| } |
| /* Unmap blit source buffer */ |
| if (smart_blit == false) { |
| mdp3_put_img(&req->src_data[i], |
| MDP3_CLIENT_PPP); |
| } |
| if (smart_blit_fg_index == i) { |
| /* Unmap smart blit BG buffer */ |
| mdp3_put_img(&req->src_data[i - 1], |
| MDP3_CLIENT_PPP); |
| smart_blit_fg_index = -1; |
| } |
| mdp3_put_img(&req->dst_data[i], |
| MDP3_CLIENT_PPP); |
| smart_blit = false; |
| } |
| } |
| ATRACE_END("mdp3_ppp_start"); |
| /* Signal to release fence */ |
| mutex_lock(&ppp_stat->req_mutex); |
| mdp3_ppp_signal_timeline(req); |
| mdp3_ppp_req_pop(&ppp_stat->req_q); |
| req = mdp3_ppp_next_req(&ppp_stat->req_q); |
| if (ppp_stat->wait_for_pop) |
| complete(&ppp_stat->pop_q_comp); |
| mutex_unlock(&ppp_stat->req_mutex); |
| } |
| mod_timer(&ppp_stat->free_bw_timer, jiffies + |
| msecs_to_jiffies(MDP_RELEASE_BW_TIMEOUT)); |
| mutex_unlock(&ppp_stat->config_ppp_mutex); |
| } |
| |
| int mdp3_ppp_parse_req(void __user *p, |
| struct mdp_async_blit_req_list *req_list_header, |
| int async) |
| { |
| struct blit_req_list *req; |
| struct blit_req_queue *req_q = &ppp_stat->req_q; |
| struct mdss_fence *fence = NULL; |
| int count, rc, idx, i; |
| |
| count = req_list_header->count; |
| |
| mutex_lock(&ppp_stat->req_mutex); |
| while (req_q->count >= MDP3_PPP_MAX_LIST_REQ) { |
| ppp_stat->wait_for_pop = true; |
| mutex_unlock(&ppp_stat->req_mutex); |
| rc = wait_for_completion_timeout( |
| &ppp_stat->pop_q_comp, 5 * HZ); |
| if (rc == 0) { |
| /* This will only occur if there is serious problem */ |
| pr_err("%s: timeout exiting queuing request\n", |
| __func__); |
| return -EBUSY; |
| } |
| mutex_lock(&ppp_stat->req_mutex); |
| ppp_stat->wait_for_pop = false; |
| } |
| idx = req_q->push_idx; |
| req = &req_q->req[idx]; |
| |
| if (copy_from_user(&req->req_list, p, |
| sizeof(struct mdp_blit_req) * count)) { |
| mutex_unlock(&ppp_stat->req_mutex); |
| return -EFAULT; |
| } |
| |
| rc = mdp3_ppp_handle_buf_sync(req, &req_list_header->sync); |
| if (rc < 0) { |
| pr_err("%s: Failed create sync point\n", __func__); |
| mutex_unlock(&ppp_stat->req_mutex); |
| return rc; |
| } |
| req->count = count; |
| |
| /* We need to grab ion handle while running in client thread */ |
| for (i = 0; i < count; i++) { |
| rc = mdp3_ppp_get_img(&req->req_list[i].src, |
| &req->req_list[i], &req->src_data[i]); |
| if (rc < 0 || req->src_data[i].len == 0) { |
| pr_err("mdp_ppp: couldn't retrieve src img from mem\n"); |
| goto parse_err_1; |
| } |
| |
| rc = mdp3_ppp_get_img(&req->req_list[i].dst, |
| &req->req_list[i], &req->dst_data[i]); |
| if (rc < 0 || req->dst_data[i].len == 0) { |
| mdp3_put_img(&req->src_data[i], MDP3_CLIENT_PPP); |
| pr_err("mdp_ppp: couldn't retrieve dest img from mem\n"); |
| goto parse_err_1; |
| } |
| } |
| |
| if (async) { |
| req->cur_rel_fen_fd = mdss_get_sync_fence_fd( |
| req->cur_rel_fence); |
| rc = copy_to_user(req_list_header->sync.rel_fen_fd, |
| &req->cur_rel_fen_fd, sizeof(int)); |
| if (rc) { |
| pr_err("%s:copy_to_user failed\n", __func__); |
| goto parse_err_2; |
| } |
| } else { |
| fence = req->cur_rel_fence; |
| } |
| |
| mdp3_ppp_req_push(req_q, req); |
| mutex_unlock(&ppp_stat->req_mutex); |
| kthread_queue_work(&ppp_stat->kworker, &ppp_stat->blit_work); |
| if (!async) { |
| /* wait for release fence */ |
| rc = mdss_wait_sync_fence(fence, |
| 5 * MSEC_PER_SEC); |
| if (rc < 0) |
| pr_err("%s: sync blit! rc = %x\n", __func__, rc); |
| |
| mdss_put_sync_fence(fence); |
| fence = NULL; |
| } |
| return 0; |
| |
| parse_err_2: |
| put_unused_fd(req->cur_rel_fen_fd); |
| parse_err_1: |
| for (i--; i >= 0; i--) { |
| mdp3_put_img(&req->src_data[i], MDP3_CLIENT_PPP); |
| mdp3_put_img(&req->dst_data[i], MDP3_CLIENT_PPP); |
| } |
| mdp3_ppp_deinit_buf_sync(req); |
| mutex_unlock(&ppp_stat->req_mutex); |
| return rc; |
| } |
| |
| int mdp3_ppp_res_init(struct msm_fb_data_type *mfd) |
| { |
| int rc; |
| struct sched_param param = {.sched_priority = 16}; |
| const char timeline_name[] = "mdp3_ppp"; |
| |
| ppp_stat = kzalloc(sizeof(struct ppp_status), GFP_KERNEL); |
| if (!ppp_stat) |
| return -ENOMEM; |
| |
| /*Setup sync_pt timeline for ppp*/ |
| ppp_stat->timeline = mdss_create_timeline(timeline_name); |
| if (ppp_stat->timeline == NULL) { |
| pr_err("%s: cannot create time line\n", __func__); |
| return -ENOMEM; |
| } |
| ppp_stat->timeline_value = 1; |
| |
| kthread_init_worker(&ppp_stat->kworker); |
| kthread_init_work(&ppp_stat->blit_work, mdp3_ppp_blit_handler); |
| ppp_stat->blit_thread = kthread_run(kthread_worker_fn, |
| &ppp_stat->kworker, |
| "mdp3_ppp"); |
| |
| if (IS_ERR(ppp_stat->blit_thread)) { |
| rc = PTR_ERR(ppp_stat->blit_thread); |
| pr_err("ERROR: unable to start ppp blit thread,err = %d\n", |
| rc); |
| ppp_stat->blit_thread = NULL; |
| return rc; |
| } |
| if (sched_setscheduler(ppp_stat->blit_thread, SCHED_FIFO, ¶m)) |
| pr_warn("set priority failed for mdp3 blit thread\n"); |
| |
| INIT_WORK(&ppp_stat->free_bw_work, mdp3_free_bw_wq_handler); |
| init_completion(&ppp_stat->pop_q_comp); |
| mutex_init(&ppp_stat->req_mutex); |
| mutex_init(&ppp_stat->config_ppp_mutex); |
| init_timer(&ppp_stat->free_bw_timer); |
| ppp_stat->free_bw_timer.function = mdp3_free_fw_timer_func; |
| ppp_stat->free_bw_timer.data = 0; |
| ppp_stat->mfd = mfd; |
| mdp3_ppp_callback_setup(); |
| return 0; |
| } |