| /* |
| * Author: Anil Kumar <anilk4.v@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| /dts-v1/; |
| |
| #include "omap34xx.dtsi" |
| / { |
| model = "TimLL OMAP3 Devkit8000"; |
| compatible = "timll,omap3-devkit8000", "ti,omap3"; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x80000000 0x10000000>; /* 256 MB */ |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| heartbeat { |
| label = "devkit8000::led1"; |
| gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ |
| default-state = "on"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| mmc { |
| label = "devkit8000::led2"; |
| gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ |
| default-state = "on"; |
| linux,default-trigger = "none"; |
| }; |
| |
| usr { |
| label = "devkit8000::led3"; |
| gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */ |
| default-state = "on"; |
| linux,default-trigger = "usr"; |
| }; |
| |
| }; |
| |
| sound { |
| compatible = "ti,omap-twl4030"; |
| ti,model = "devkit8000"; |
| |
| ti,mcbsp = <&mcbsp2>; |
| ti,codec = <&twl_audio>; |
| ti,audio-routing = |
| "Ext Spk", "PREDRIVEL", |
| "Ext Spk", "PREDRIVER", |
| "MAINMIC", "Main Mic", |
| "Main Mic", "Mic Bias 1"; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <2600000>; |
| |
| twl: twl@48 { |
| reg = <0x48>; |
| interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| |
| twl_audio: audio { |
| compatible = "ti,twl4030-audio"; |
| codec { |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| status = "disabled"; |
| }; |
| |
| &i2c3 { |
| status = "disabled"; |
| }; |
| |
| #include "twl4030.dtsi" |
| #include "twl4030_omap3.dtsi" |
| |
| &mmc1 { |
| vmmc-supply = <&vmmc1>; |
| vmmc_aux-supply = <&vsim>; |
| bus-width = <8>; |
| }; |
| |
| &mmc2 { |
| status = "disabled"; |
| }; |
| |
| &mmc3 { |
| status = "disabled"; |
| }; |
| |
| &wdt2 { |
| status = "disabled"; |
| }; |
| |
| &mcbsp1 { |
| status = "disabled"; |
| }; |
| |
| &mcbsp3 { |
| status = "disabled"; |
| }; |
| |
| &mcbsp4 { |
| status = "disabled"; |
| }; |
| |
| &mcbsp5 { |
| status = "disabled"; |
| }; |
| |
| &gpmc { |
| ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ |
| |
| nand@0,0 { |
| reg = <0 0 0>; /* CS0, offset 0 */ |
| nand-bus-width = <16>; |
| |
| gpmc,sync-clk = <0>; |
| gpmc,cs-on = <0>; |
| gpmc,cs-rd-off = <44>; |
| gpmc,cs-wr-off = <44>; |
| gpmc,adv-on = <6>; |
| gpmc,adv-rd-off = <34>; |
| gpmc,adv-wr-off = <44>; |
| gpmc,we-off = <40>; |
| gpmc,oe-off = <54>; |
| gpmc,access = <64>; |
| gpmc,rd-cycle = <82>; |
| gpmc,wr-cycle = <82>; |
| gpmc,wr-access = <40>; |
| gpmc,wr-data-mux-bus = <0>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| x-loader@0 { |
| label = "X-Loader"; |
| reg = <0 0x80000>; |
| }; |
| |
| bootloaders@80000 { |
| label = "U-Boot"; |
| reg = <0x80000 0x1e0000>; |
| }; |
| |
| bootloaders_env@260000 { |
| label = "U-Boot Env"; |
| reg = <0x260000 0x20000>; |
| }; |
| |
| kernel@280000 { |
| label = "Kernel"; |
| reg = <0x280000 0x400000>; |
| }; |
| |
| filesystem@680000 { |
| label = "File System"; |
| reg = <0x680000 0xf980000>; |
| }; |
| }; |
| }; |