Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
Revert "HID: add support for the Wacom Intuos 4 wireless"
HID: fix up Kconfig entry for ACRUX driver
HID: add ACRUX game controller force feedback support
HID: Force input registration for "VEC footpedal"
HID: add HID_QUIRK_HIDINPUT_FORCE
HID: hid-input.c: indentation fixes
HID: hiddev: use usb_find_interface, get rid of BKL
HID: ignore digitizer usage Undefined (0x00)
HID: Add support for Conceptronic CLLRCMCE
HID: hid-ids.h: Whitespace fixup, align using TABs
HID: picolcd: implement refcounting of framebuffer
HID: picolcd: do not reallocate memory on depth change
HID: picolcd: Add minimal palette required by fbcon on 8bpp
HID: magicmouse: Correct parsing of large X and Y motions.
HID: magicmouse: report last touch up
HID: picolcd: fix deferred_io init/cleanup to fb ordering
HID: hid-ids.h: keep vendor ids in alphabetical order
HID: add proper support for Elecom BM084 bluetooth mouse
HID: magicmouse: enable horizontal scrolling
HID: magicmouse: add param for scroll speed
...
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
index 88340a2..063bda7 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -33,19 +33,6 @@
left. E.g. a returned value of 138 means 1.38
This file is readonly.
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/kone_driver_version
-Date: March 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns the driver version.
- The format of the string is "v<major>.<minor>.<patchlevel>".
- This attribute is used by the userland tools to find the sysfs-
- paths of installed kone-mice and determine the capabilites of
- the driver. Versions of this driver for old kernels replace
- usbhid instead of generic-usb. The way to scan for this file
- has been chosen to provide a consistent way for all supported
- kernel versions.
- This file is readonly.
-
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 4340993..6369ba7 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -68,6 +68,14 @@
---help---
Support for A4 tech X5 and WOP-35 / Trust 450L mice.
+config HID_ACRUX_FF
+ tristate "ACRUX force feedback support"
+ depends on USB_HID
+ select INPUT_FF_MEMLESS
+ ---help---
+ Say Y here if you want to enable force feedback support for ACRUX
+ game controllers.
+
config HID_APPLE
tristate "Apple" if EMBEDDED
depends on (USB_HID || BT_HIDP)
@@ -148,6 +156,12 @@
---help---
Support for the eGalax dual-touch panel.
+config HID_ELECOM
+ tristate "ELECOM"
+ depends on BT_HIDP
+ ---help---
+ Support for the ELECOM BM084 (bluetooth mouse).
+
config HID_EZKEY
tristate "Ezkey" if EMBEDDED
depends on USB_HID
@@ -417,10 +431,11 @@
enable force feedback support for it.
config HID_TOPSEED
- tristate "TopSeed Cyberlink remote control support"
+ tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
depends on USB_HID
---help---
- Say Y if you have a TopSeed Cyberlink or BTC Emprex remote control.
+ Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
+ CLLRCMCE remote control.
config HID_THRUSTMASTER
tristate "ThrustMaster devices support"
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 987fa06..46f037f 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -24,6 +24,7 @@
obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
+obj-$(CONFIG_HID_ACRUX_FF) += hid-axff.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
obj-$(CONFIG_HID_CANDO) += hid-cando.o
@@ -32,6 +33,7 @@
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
obj-$(CONFIG_HID_DRAGONRISE) += hid-drff.o
obj-$(CONFIG_HID_EGALAX) += hid-egalax.o
+obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
diff --git a/drivers/hid/hid-axff.c b/drivers/hid/hid-axff.c
new file mode 100644
index 0000000..f42ee14
--- /dev/null
+++ b/drivers/hid/hid-axff.c
@@ -0,0 +1,172 @@
+/*
+ * Force feedback support for ACRUX game controllers
+ *
+ * From what I have gathered, these devices are mass produced in China
+ * by several vendors. They often share the same design as the original
+ * Xbox 360 controller.
+ *
+ * 1a34:0802 "ACRUX USB GAMEPAD 8116"
+ * - tested with a EXEQ EQ-PCU-02090 game controller.
+ *
+ * Copyright (c) 2010 Sergei Kolzun <x0r@dv-life.ru>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+
+#include "hid-ids.h"
+#include "usbhid/usbhid.h"
+
+struct axff_device {
+ struct hid_report *report;
+};
+
+static int axff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct axff_device *axff = data;
+ int left, right;
+
+ left = effect->u.rumble.strong_magnitude;
+ right = effect->u.rumble.weak_magnitude;
+
+ dbg_hid("called with 0x%04x 0x%04x", left, right);
+
+ left = left * 0xff / 0xffff;
+ right = right * 0xff / 0xffff;
+
+ axff->report->field[0]->value[0] = left;
+ axff->report->field[1]->value[0] = right;
+ axff->report->field[2]->value[0] = left;
+ axff->report->field[3]->value[0] = right;
+ dbg_hid("running with 0x%02x 0x%02x", left, right);
+ usbhid_submit_report(hid, axff->report, USB_DIR_OUT);
+
+ return 0;
+}
+
+static int axff_init(struct hid_device *hid)
+{
+ struct axff_device *axff;
+ struct hid_report *report;
+ struct hid_input *hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
+ struct list_head *report_list =&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct input_dev *dev = hidinput->input;
+ int error;
+
+ if (list_empty(report_list)) {
+ dev_err(&hid->dev, "no output reports found\n");
+ return -ENODEV;
+ }
+
+ report = list_first_entry(report_list, struct hid_report, list);
+
+ if (report->maxfield < 4) {
+ dev_err(&hid->dev, "no fields in the report: %d\n", report->maxfield);
+ return -ENODEV;
+ }
+
+ axff = kzalloc(sizeof(struct axff_device), GFP_KERNEL);
+ if (!axff)
+ return -ENOMEM;
+
+ set_bit(FF_RUMBLE, dev->ffbit);
+
+ error = input_ff_create_memless(dev, axff, axff_play);
+ if (error)
+ goto err_free_mem;
+
+ axff->report = report;
+ axff->report->field[0]->value[0] = 0x00;
+ axff->report->field[1]->value[0] = 0x00;
+ axff->report->field[2]->value[0] = 0x00;
+ axff->report->field[3]->value[0] = 0x00;
+ usbhid_submit_report(hid, axff->report, USB_DIR_OUT);
+
+ dev_info(&hid->dev, "Force Feedback for ACRUX game controllers by Sergei Kolzun<x0r@dv-life.ru>\n");
+
+ return 0;
+
+err_free_mem:
+ kfree(axff);
+ return error;
+}
+
+static int ax_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int error;
+
+ dev_dbg(&hdev->dev, "ACRUX HID hardware probe...");
+
+ error = hid_parse(hdev);
+ if (error) {
+ dev_err(&hdev->dev, "parse failed\n");
+ return error;
+ }
+
+ error = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+ if (error) {
+ dev_err(&hdev->dev, "hw start failed\n");
+ return error;
+ }
+
+ error = axff_init(hdev);
+ if (error) {
+ /*
+ * Do not fail device initialization completely as device
+ * may still be partially operable, just warn.
+ */
+ dev_warn(&hdev->dev,
+ "Failed to enable force feedback support, error: %d\n",
+ error);
+ }
+
+ return 0;
+}
+
+static const struct hid_device_id ax_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802), },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, ax_devices);
+
+static struct hid_driver ax_driver = {
+ .name = "acrux",
+ .id_table = ax_devices,
+ .probe = ax_probe,
+};
+
+static int __init ax_init(void)
+{
+ return hid_register_driver(&ax_driver);
+}
+
+static void __exit ax_exit(void)
+{
+ hid_unregister_driver(&ax_driver);
+}
+
+module_init(ax_init);
+module_exit(ax_exit);
+
+MODULE_AUTHOR("Sergei Kolzun");
+MODULE_DESCRIPTION("Force feedback support for ACRUX game controllers");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index b54a9a6..e635199 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1157,6 +1157,8 @@
if (hdev->quirks & HID_QUIRK_HIDDEV_FORCE)
connect_mask |= (HID_CONNECT_HIDDEV_FORCE | HID_CONNECT_HIDDEV);
+ if (hdev->quirks & HID_QUIRK_HIDINPUT_FORCE)
+ connect_mask |= HID_CONNECT_HIDINPUT_FORCE;
if (hdev->bus != BUS_USB)
connect_mask &= ~HID_CONNECT_HIDDEV;
if (hid_hiddev(hdev))
@@ -1239,6 +1241,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
+#if defined(CONFIG_HID_ACRUX_FF) || defined(CONFIG_HID_ACRUX_FF_MODULE)
+ { HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802) },
+#endif
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
@@ -1294,6 +1299,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
@@ -1375,10 +1381,10 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
diff --git a/drivers/hid/hid-elecom.c b/drivers/hid/hid-elecom.c
new file mode 100644
index 0000000..7a40878
--- /dev/null
+++ b/drivers/hid/hid-elecom.c
@@ -0,0 +1,57 @@
+/*
+ * HID driver for Elecom BM084 (bluetooth mouse).
+ * Removes a non-existing horizontal wheel from
+ * the HID descriptor.
+ * (This module is based on "hid-ortek".)
+ *
+ * Copyright (c) 2010 Richard Nauber <Richard.Nauber@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static void elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int rsize)
+{
+ if (rsize >= 48 && rdesc[46] == 0x05 && rdesc[47] == 0x0c) {
+ dev_info(&hdev->dev, "Fixing up Elecom BM084 "
+ "report descriptor.\n");
+ rdesc[47] = 0x00;
+ }
+}
+
+static const struct hid_device_id elecom_devices[] = {
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084)},
+ { }
+};
+MODULE_DEVICE_TABLE(hid, elecom_devices);
+
+static struct hid_driver elecom_driver = {
+ .name = "elecom",
+ .id_table = elecom_devices,
+ .report_fixup = elecom_report_fixup
+};
+
+static int __init elecom_init(void)
+{
+ return hid_register_driver(&elecom_driver);
+}
+
+static void __exit elecom_exit(void)
+{
+ hid_unregister_driver(&elecom_driver);
+}
+
+module_init(elecom_init);
+module_exit(elecom_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 8aee257..d3fc13a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -34,6 +34,8 @@
#define USB_DEVICE_ID_ACECAD_FLAIR 0x0004
#define USB_DEVICE_ID_ACECAD_302 0x0008
+#define USB_VENDOR_ID_ACRUX 0x1a34
+
#define USB_VENDOR_ID_ADS_TECH 0x06e1
#define USB_DEVICE_ID_ADS_TECH_RADIO_SI470X 0xa155
@@ -81,12 +83,12 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI 0x0223
#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO 0x0224
#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS 0x0225
-#define USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI 0x0229
-#define USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO 0x022a
-#define USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS 0x022b
-#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI 0x022c
-#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO 0x022d
-#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS 0x022e
+#define USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI 0x0229
+#define USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO 0x022a
+#define USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS 0x022b
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI 0x022c
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO 0x022d
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS 0x022e
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
@@ -118,8 +120,8 @@
#define USB_VENDOR_ID_AVERMEDIA 0x07ca
#define USB_DEVICE_ID_AVER_FM_MR800 0xb800
-#define USB_VENDOR_ID_BELKIN 0x050d
-#define USB_DEVICE_ID_FLIP_KVM 0x3201
+#define USB_VENDOR_ID_BELKIN 0x050d
+#define USB_DEVICE_ID_FLIP_KVM 0x3201
#define USB_VENDOR_ID_BERKSHIRE 0x0c98
#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
@@ -128,7 +130,7 @@
#define USB_DEVICE_ID_BTC_EMPREX_REMOTE 0x5578
#define USB_VENDOR_ID_CANDO 0x2087
-#define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01
+#define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01
#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6 0x0b03
#define USB_VENDOR_ID_CH 0x068e
@@ -175,7 +177,7 @@
#define USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701 0x819a
#define USB_VENDOR_ID_DELORME 0x1163
-#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
+#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200
#define USB_VENDOR_ID_DMI 0x0c0b
@@ -187,20 +189,23 @@
#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH 0x480d
+#define USB_VENDOR_ID_ELECOM 0x056e
+#define USB_DEVICE_ID_ELECOM_BM084 0x0061
+
#define USB_VENDOR_ID_ELO 0x04E7
#define USB_DEVICE_ID_ELO_TS2700 0x0020
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
-#define USB_VENDOR_ID_ETURBOTOUCH 0x22b9
-#define USB_DEVICE_ID_ETURBOTOUCH 0x0006
-
#define USB_VENDOR_ID_ETT 0x0664
#define USB_DEVICE_ID_TC5UH 0x0309
#define USB_DEVICE_ID_TC4UM 0x0306
-#define USB_VENDOR_ID_EZKEY 0x0518
+#define USB_VENDOR_ID_ETURBOTOUCH 0x22b9
+#define USB_DEVICE_ID_ETURBOTOUCH 0x0006
+
+#define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002
#define USB_VENDOR_ID_GAMERON 0x0810
@@ -297,9 +302,16 @@
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
+#define USB_VENDOR_ID_KENSINGTON 0x047d
+#define USB_DEVICE_ID_KS_SLIMBLADE 0x2041
+
#define USB_VENDOR_ID_KWORLD 0x1b80
#define USB_DEVICE_ID_KWORLD_RADIO_FM700 0xd700
+#define USB_VENDOR_ID_KYE 0x0458
+#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
+#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
+
#define USB_VENDOR_ID_LABTEC 0x1020
#define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006
@@ -319,9 +331,6 @@
#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030
#define USB_DEVICE_ID_LD_MACHINETEST 0x2040
-#define USB_VENDOR_ID_KENSINGTON 0x047d
-#define USB_DEVICE_ID_KS_SLIMBLADE 0x2041
-
#define USB_VENDOR_ID_LOGITECH 0x046d
#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101
#define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110
@@ -377,23 +386,23 @@
#define USB_VENDOR_ID_MONTEREY 0x0566
#define USB_DEVICE_ID_GENIUS_KB29E 0x3004
+#define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
+#define USB_DEVICE_ID_N_S_HARMONY 0xc359
+
+#define USB_VENDOR_ID_NATSU 0x08b7
+#define USB_DEVICE_ID_NATSU_GAMEPAD 0x0001
+
#define USB_VENDOR_ID_NCR 0x0404
#define USB_DEVICE_ID_NCR_FIRST 0x0300
#define USB_DEVICE_ID_NCR_LAST 0x03ff
-#define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
-#define USB_DEVICE_ID_N_S_HARMONY 0xc359
-
-#define USB_VENDOR_ID_NATSU 0x08b7
-#define USB_DEVICE_ID_NATSU_GAMEPAD 0x0001
-
#define USB_VENDOR_ID_NEC 0x073e
#define USB_DEVICE_ID_NEC_USB_GAME_PAD 0x0301
#define USB_VENDOR_ID_NEXTWINDOW 0x1926
#define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN 0x0003
-#define USB_VENDOR_ID_NTRIG 0x1b96
+#define USB_VENDOR_ID_NTRIG 0x1b96
#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN 0x0001
#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1 0x0003
#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2 0x0004
@@ -428,9 +437,12 @@
#define USB_VENDOR_ID_PETALYNX 0x18b1
#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037
-#define USB_VENDOR_ID_PHILIPS 0x0471
+#define USB_VENDOR_ID_PHILIPS 0x0471
#define USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE 0x0617
+#define USB_VENDOR_ID_PI_ENGINEERING 0x05f3
+#define USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL 0xff
+
#define USB_VENDOR_ID_PLAYDOTCOM 0x0b43
#define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003
@@ -440,16 +452,16 @@
#define USB_VENDOR_ID_PRODIGE 0x05af
#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062
+#define USB_VENDOR_ID_QUANTA 0x0408
+#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH 0x3000
+#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN 0x3001
+
#define USB_VENDOR_ID_ROCCAT 0x1e7d
#define USB_DEVICE_ID_ROCCAT_KONE 0x2ced
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
-#define USB_VENDOR_ID_QUANTA 0x0408
-#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH 0x3000
-#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN 0x3001
-
#define USB_VENDOR_ID_SAMSUNG 0x0419
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
#define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600
@@ -473,20 +485,23 @@
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
-#define USB_VENDOR_ID_TOUCHPACK 0x1bfd
-#define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688
+#define USB_VENDOR_ID_TOPSEED 0x0766
+#define USB_DEVICE_ID_TOPSEED_CYBERLINK 0x0204
+
+#define USB_VENDOR_ID_TOPSEED2 0x1784
+#define USB_DEVICE_ID_TOPSEED2_RF_COMBO 0x0004
#define USB_VENDOR_ID_TOPMAX 0x0663
#define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103
-#define USB_VENDOR_ID_TOPSEED 0x0766
-#define USB_DEVICE_ID_TOPSEED_CYBERLINK 0x0204
+#define USB_VENDOR_ID_TOUCHPACK 0x1bfd
+#define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688
#define USB_VENDOR_ID_TURBOX 0x062a
#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201
-#define USB_VENDOR_ID_TWINHAN 0x6253
-#define USB_DEVICE_ID_TWINHAN_IR_REMOTE 0x0100
+#define USB_VENDOR_ID_TWINHAN 0x6253
+#define USB_DEVICE_ID_TWINHAN_IR_REMOTE 0x0100
#define USB_VENDOR_ID_UCLOGIC 0x5543
#define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209 0x0042
@@ -501,7 +516,6 @@
#define USB_VENDOR_ID_WACOM 0x056a
#define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH 0x81
-#define USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH 0xbd
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005
@@ -523,9 +537,4 @@
#define USB_VENDOR_ID_ZYDACRON 0x13EC
#define USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL 0x0006
-#define USB_VENDOR_ID_KYE 0x0458
-#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
-#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
-
-
#endif
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 69d152e..6c03dcc 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -199,11 +199,11 @@
case HID_GD_MOUSE:
case HID_GD_POINTER: code += 0x110; break;
case HID_GD_JOYSTICK:
- if (code <= 0xf)
- code += BTN_JOYSTICK;
- else
- code += BTN_TRIGGER_HAPPY;
- break;
+ if (code <= 0xf)
+ code += BTN_JOYSTICK;
+ else
+ code += BTN_TRIGGER_HAPPY;
+ break;
case HID_GD_GAMEPAD: code += 0x130; break;
default:
switch (field->physical) {
@@ -301,6 +301,9 @@
case HID_UP_DIGITIZER:
switch (usage->hid & 0xff) {
+ case 0x00: /* Undefined */
+ goto ignore;
+
case 0x30: /* TipPressure */
if (!test_bit(BTN_TOUCH, input->keybit)) {
device->quirks |= HID_QUIRK_NOTOUCH;
@@ -480,7 +483,7 @@
case HID_UP_LOGIVENDOR:
goto ignore;
-
+
case HID_UP_PID:
switch (usage->hid & HID_USAGE) {
case 0xa4: map_key_clear(BTN_DEAD); break;
@@ -589,9 +592,9 @@
hat_dir = (value - usage->hat_min) * 8 / (usage->hat_max - usage->hat_min + 1) + 1;
if (hat_dir < 0 || hat_dir > 8) hat_dir = 0;
input_event(input, usage->type, usage->code , hid_hat_to_axis[hat_dir].x);
- input_event(input, usage->type, usage->code + 1, hid_hat_to_axis[hat_dir].y);
- return;
- }
+ input_event(input, usage->type, usage->code + 1, hid_hat_to_axis[hat_dir].y);
+ return;
+ }
if (usage->hid == (HID_UP_DIGITIZER | 0x003c)) { /* Invert */
*quirks = value ? (*quirks | HID_QUIRK_INVERT) : (*quirks & ~HID_QUIRK_INVERT);
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index f10d56a..319b0e5 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -30,6 +30,21 @@
module_param(emulate_scroll_wheel, bool, 0644);
MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel");
+static unsigned int scroll_speed = 32;
+static int param_set_scroll_speed(const char *val, struct kernel_param *kp) {
+ unsigned long speed;
+ if (!val || strict_strtoul(val, 0, &speed) || speed > 63)
+ return -EINVAL;
+ scroll_speed = speed;
+ return 0;
+}
+module_param_call(scroll_speed, param_set_scroll_speed, param_get_uint, &scroll_speed, 0644);
+MODULE_PARM_DESC(scroll_speed, "Scroll speed, value from 0 (slow) to 63 (fast)");
+
+static bool scroll_acceleration = false;
+module_param(scroll_acceleration, bool, 0644);
+MODULE_PARM_DESC(scroll_acceleration, "Accelerate sequential scroll events");
+
static bool report_touches = true;
module_param(report_touches, bool, 0644);
MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)");
@@ -50,6 +65,8 @@
#define TOUCH_STATE_START 0x30
#define TOUCH_STATE_DRAG 0x40
+#define SCROLL_ACCEL_DEFAULT 7
+
/**
* struct magicmouse_sc - Tracks Magic Mouse-specific data.
* @input: Input device through which we report events.
@@ -78,8 +95,10 @@
struct {
short x;
short y;
+ short scroll_x;
short scroll_y;
u8 size;
+ u8 down;
} touches[16];
int tracking_ids[16];
};
@@ -141,7 +160,7 @@
input_report_key(msc->input, BTN_RIGHT, state & 2);
if (state != last_state)
- msc->scroll_accel = 0;
+ msc->scroll_accel = SCROLL_ACCEL_DEFAULT;
}
static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata)
@@ -152,6 +171,7 @@
int id = (misc >> 6) & 15;
int x = x_y << 12 >> 20;
int y = -(x_y >> 20);
+ int down = (tdata[7] & TOUCH_STATE_MASK) != TOUCH_STATE_NONE;
/* Store tracking ID and other fields. */
msc->tracking_ids[raw_id] = id;
@@ -160,42 +180,54 @@
msc->touches[id].size = misc & 63;
/* If requested, emulate a scroll wheel by detecting small
- * vertical touch motions along the middle of the mouse.
+ * vertical touch motions.
*/
- if (emulate_scroll_wheel &&
- middle_button_start < x && x < middle_button_stop) {
- static const int accel_profile[] = {
- 256, 228, 192, 160, 128, 96, 64, 32,
- };
+ if (emulate_scroll_wheel) {
unsigned long now = jiffies;
- int step = msc->touches[id].scroll_y - y;
-
- /* Reset acceleration after half a second. */
- if (time_after(now, msc->scroll_jiffies + HZ / 2))
- msc->scroll_accel = 0;
+ int step_x = msc->touches[id].scroll_x - x;
+ int step_y = msc->touches[id].scroll_y - y;
/* Calculate and apply the scroll motion. */
switch (tdata[7] & TOUCH_STATE_MASK) {
case TOUCH_STATE_START:
+ msc->touches[id].scroll_x = x;
msc->touches[id].scroll_y = y;
- msc->scroll_accel = min_t(int, msc->scroll_accel + 1,
- ARRAY_SIZE(accel_profile) - 1);
+
+ /* Reset acceleration after half a second. */
+ if (scroll_acceleration && time_before(now,
+ msc->scroll_jiffies + HZ / 2))
+ msc->scroll_accel = max_t(int,
+ msc->scroll_accel - 1, 1);
+ else
+ msc->scroll_accel = SCROLL_ACCEL_DEFAULT;
+
break;
case TOUCH_STATE_DRAG:
- step = step / accel_profile[msc->scroll_accel];
- if (step != 0) {
- msc->touches[id].scroll_y = y;
+ step_x /= (64 - (int)scroll_speed) * msc->scroll_accel;
+ if (step_x != 0) {
+ msc->touches[id].scroll_x -= step_x *
+ (64 - scroll_speed) * msc->scroll_accel;
msc->scroll_jiffies = now;
- input_report_rel(input, REL_WHEEL, step);
+ input_report_rel(input, REL_HWHEEL, -step_x);
+ }
+
+ step_y /= (64 - (int)scroll_speed) * msc->scroll_accel;
+ if (step_y != 0) {
+ msc->touches[id].scroll_y -= step_y *
+ (64 - scroll_speed) * msc->scroll_accel;
+ msc->scroll_jiffies = now;
+ input_report_rel(input, REL_WHEEL, step_y);
}
break;
}
}
/* Generate the input events for this touch. */
- if (report_touches) {
+ if (report_touches && down) {
int orientation = (misc >> 10) - 32;
+ msc->touches[id].down = 1;
+
input_report_abs(input, ABS_MT_TRACKING_ID, id);
input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]);
input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]);
@@ -215,7 +247,7 @@
{
struct magicmouse_sc *msc = hid_get_drvdata(hdev);
struct input_dev *input = msc->input;
- int x, y, ts, ii, clicks;
+ int x, y, ts, ii, clicks, last_up;
switch (data[0]) {
case 0x10:
@@ -235,12 +267,26 @@
msc->ntouches = (size - 6) / 8;
for (ii = 0; ii < msc->ntouches; ii++)
magicmouse_emit_touch(msc, ii, data + ii * 8 + 6);
+
+ if (report_touches) {
+ last_up = 1;
+ for (ii = 0; ii < ARRAY_SIZE(msc->touches); ii++) {
+ if (msc->touches[ii].down) {
+ last_up = 0;
+ msc->touches[ii].down = 0;
+ }
+ }
+ if (last_up) {
+ input_mt_sync(input);
+ }
+ }
+
/* When emulating three-button mode, it is important
* to have the current touch information before
* generating a click event.
*/
- x = (signed char)data[1];
- y = (signed char)data[2];
+ x = (int)(((data[3] & 0x0c) << 28) | (data[1] << 22)) >> 22;
+ y = (int)(((data[3] & 0x30) << 26) | (data[2] << 22)) >> 22;
clicks = data[3];
break;
case 0x20: /* Theoretically battery status (0-100), but I have
@@ -301,8 +347,10 @@
__set_bit(EV_REL, input->evbit);
__set_bit(REL_X, input->relbit);
__set_bit(REL_Y, input->relbit);
- if (emulate_scroll_wheel)
+ if (emulate_scroll_wheel) {
__set_bit(REL_WHEEL, input->relbit);
+ __set_bit(REL_HWHEEL, input->relbit);
+ }
if (report_touches) {
__set_bit(EV_ABS, input->evbit);
@@ -345,6 +393,8 @@
return -ENOMEM;
}
+ msc->scroll_accel = SCROLL_ACCEL_DEFAULT;
+
msc->quirks = id->driver_data;
hid_set_drvdata(hdev, msc);
diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c
index 7aabf65..346f0e3 100644
--- a/drivers/hid/hid-picolcd.c
+++ b/drivers/hid/hid-picolcd.c
@@ -127,6 +127,26 @@
.height = 26,
.bits_per_pixel = 1,
.grayscale = 1,
+ .red = {
+ .offset = 0,
+ .length = 1,
+ .msb_right = 0,
+ },
+ .green = {
+ .offset = 0,
+ .length = 1,
+ .msb_right = 0,
+ },
+ .blue = {
+ .offset = 0,
+ .length = 1,
+ .msb_right = 0,
+ },
+ .transp = {
+ .offset = 0,
+ .length = 0,
+ .msb_right = 0,
+ },
};
#endif /* CONFIG_HID_PICOLCD_FB */
@@ -188,6 +208,7 @@
/* Framebuffer stuff */
u8 fb_update_rate;
u8 fb_bpp;
+ u8 fb_force;
u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */
u8 *fb_bitmap; /* framebuffer */
struct fb_info *fb_info;
@@ -346,7 +367,7 @@
const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32;
for (i = 0; i < 64; i++) {
tdata[i] <<= 1;
- tdata[i] |= (bdata[i/8] >> (7 - i % 8)) & 0x01;
+ tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01;
}
}
} else if (bpp == 8) {
@@ -399,13 +420,10 @@
if (data->fb_bitmap) {
if (clear) {
- memset(data->fb_vbitmap, 0xff, PICOLCDFB_SIZE);
+ memset(data->fb_vbitmap, 0, PICOLCDFB_SIZE);
memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp);
- } else {
- /* invert 1 byte in each tile to force resend */
- for (i = 0; i < PICOLCDFB_SIZE; i += 64)
- data->fb_vbitmap[i] = ~data->fb_vbitmap[i];
}
+ data->fb_force = 1;
}
/* schedule first output of framebuffer */
@@ -421,6 +439,9 @@
int chip, tile, n;
unsigned long flags;
+ if (!data)
+ return;
+
spin_lock_irqsave(&data->lock, flags);
if (!(data->status & PICOLCD_READY_FB)) {
spin_unlock_irqrestore(&data->lock, flags);
@@ -440,14 +461,18 @@
for (chip = 0; chip < 4; chip++)
for (tile = 0; tile < 8; tile++)
if (picolcd_fb_update_tile(data->fb_vbitmap,
- data->fb_bitmap, data->fb_bpp, chip, tile)) {
+ data->fb_bitmap, data->fb_bpp, chip, tile) ||
+ data->fb_force) {
n += 2;
+ if (!data->fb_info->par)
+ return; /* device lost! */
if (n >= HID_OUTPUT_FIFO_SIZE / 2) {
usbhid_wait_io(data->hdev);
n = 0;
}
picolcd_fb_send_tile(data->hdev, chip, tile);
}
+ data->fb_force = false;
if (n)
usbhid_wait_io(data->hdev);
}
@@ -511,11 +536,23 @@
static void picolcd_fb_destroy(struct fb_info *info)
{
struct picolcd_data *data = info->par;
+ u32 *ref_cnt = info->pseudo_palette;
+ int may_release;
+
info->par = NULL;
if (data)
data->fb_info = NULL;
fb_deferred_io_cleanup(info);
- framebuffer_release(info);
+
+ ref_cnt--;
+ mutex_lock(&info->lock);
+ (*ref_cnt)--;
+ may_release = !ref_cnt;
+ mutex_unlock(&info->lock);
+ if (may_release) {
+ framebuffer_release(info);
+ vfree((u8 *)info->fix.smem_start);
+ }
}
static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -526,29 +563,37 @@
/* only allow 1/8 bit depth (8-bit is grayscale) */
*var = picolcdfb_var;
var->activate = activate;
- if (bpp >= 8)
+ if (bpp >= 8) {
var->bits_per_pixel = 8;
- else
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ } else {
var->bits_per_pixel = 1;
+ var->red.length = 1;
+ var->green.length = 1;
+ var->blue.length = 1;
+ }
return 0;
}
static int picolcd_set_par(struct fb_info *info)
{
struct picolcd_data *data = info->par;
- u8 *o_fb, *n_fb;
+ u8 *tmp_fb, *o_fb;
+ if (!data)
+ return -ENODEV;
if (info->var.bits_per_pixel == data->fb_bpp)
return 0;
/* switch between 1/8 bit depths */
if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8)
return -EINVAL;
- o_fb = data->fb_bitmap;
- n_fb = vmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel);
- if (!n_fb)
+ o_fb = data->fb_bitmap;
+ tmp_fb = kmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel, GFP_KERNEL);
+ if (!tmp_fb)
return -ENOMEM;
- fb_deferred_io_cleanup(info);
/* translate FB content to new bits-per-pixel */
if (info->var.bits_per_pixel == 1) {
int i, b;
@@ -558,24 +603,87 @@
p <<= 1;
p |= o_fb[i*8+b] ? 0x01 : 0x00;
}
+ tmp_fb[i] = p;
}
+ memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE);
info->fix.visual = FB_VISUAL_MONO01;
info->fix.line_length = PICOLCDFB_WIDTH / 8;
} else {
int i;
+ memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE);
for (i = 0; i < PICOLCDFB_SIZE * 8; i++)
- n_fb[i] = o_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00;
- info->fix.visual = FB_VISUAL_TRUECOLOR;
+ o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00;
+ info->fix.visual = FB_VISUAL_DIRECTCOLOR;
info->fix.line_length = PICOLCDFB_WIDTH;
}
- data->fb_bitmap = n_fb;
+ kfree(tmp_fb);
data->fb_bpp = info->var.bits_per_pixel;
- info->screen_base = (char __force __iomem *)n_fb;
- info->fix.smem_start = (unsigned long)n_fb;
- info->fix.smem_len = PICOLCDFB_SIZE*data->fb_bpp;
- fb_deferred_io_init(info);
- vfree(o_fb);
+ return 0;
+}
+
+/* Do refcounting on our FB and cleanup per worker if FB is
+ * closed after unplug of our device
+ * (fb_release holds info->lock and still touches info after
+ * we return so we can't release it immediately.
+ */
+struct picolcd_fb_cleanup_item {
+ struct fb_info *info;
+ struct picolcd_fb_cleanup_item *next;
+};
+static struct picolcd_fb_cleanup_item *fb_pending;
+DEFINE_SPINLOCK(fb_pending_lock);
+
+static void picolcd_fb_do_cleanup(struct work_struct *data)
+{
+ struct picolcd_fb_cleanup_item *item;
+ unsigned long flags;
+
+ do {
+ spin_lock_irqsave(&fb_pending_lock, flags);
+ item = fb_pending;
+ fb_pending = item ? item->next : NULL;
+ spin_unlock_irqrestore(&fb_pending_lock, flags);
+
+ if (item) {
+ u8 *fb = (u8 *)item->info->fix.smem_start;
+ /* make sure we do not race against fb core when
+ * releasing */
+ mutex_lock(&item->info->lock);
+ mutex_unlock(&item->info->lock);
+ framebuffer_release(item->info);
+ vfree(fb);
+ }
+ } while (item);
+}
+
+DECLARE_WORK(picolcd_fb_cleanup, picolcd_fb_do_cleanup);
+
+static int picolcd_fb_open(struct fb_info *info, int u)
+{
+ u32 *ref_cnt = info->pseudo_palette;
+ ref_cnt--;
+
+ (*ref_cnt)++;
+ return 0;
+}
+
+static int picolcd_fb_release(struct fb_info *info, int u)
+{
+ u32 *ref_cnt = info->pseudo_palette;
+ ref_cnt--;
+
+ (*ref_cnt)++;
+ if (!*ref_cnt) {
+ unsigned long flags;
+ struct picolcd_fb_cleanup_item *item = (struct picolcd_fb_cleanup_item *)ref_cnt;
+ item--;
+ spin_lock_irqsave(&fb_pending_lock, flags);
+ item->next = fb_pending;
+ fb_pending = item;
+ spin_unlock_irqrestore(&fb_pending_lock, flags);
+ schedule_work(&picolcd_fb_cleanup);
+ }
return 0;
}
@@ -583,6 +691,8 @@
static struct fb_ops picolcdfb_ops = {
.owner = THIS_MODULE,
.fb_destroy = picolcd_fb_destroy,
+ .fb_open = picolcd_fb_open,
+ .fb_release = picolcd_fb_release,
.fb_read = fb_sys_read,
.fb_write = picolcd_fb_write,
.fb_blank = picolcd_fb_blank,
@@ -660,11 +770,12 @@
{
struct device *dev = &data->hdev->dev;
struct fb_info *info = NULL;
- int error = -ENOMEM;
+ int i, error = -ENOMEM;
u8 *fb_vbitmap = NULL;
u8 *fb_bitmap = NULL;
+ u32 *palette;
- fb_bitmap = vmalloc(PICOLCDFB_SIZE*picolcdfb_var.bits_per_pixel);
+ fb_bitmap = vmalloc(PICOLCDFB_SIZE*8);
if (fb_bitmap == NULL) {
dev_err(dev, "can't get a free page for framebuffer\n");
goto err_nomem;
@@ -678,18 +789,29 @@
data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT;
data->fb_defio = picolcd_fb_defio;
- info = framebuffer_alloc(0, dev);
+ /* The extra memory is:
+ * - struct picolcd_fb_cleanup_item
+ * - u32 for ref_count
+ * - 256*u32 for pseudo_palette
+ */
+ info = framebuffer_alloc(257 * sizeof(u32) + sizeof(struct picolcd_fb_cleanup_item), dev);
if (info == NULL) {
dev_err(dev, "failed to allocate a framebuffer\n");
goto err_nomem;
}
+ palette = info->par + sizeof(struct picolcd_fb_cleanup_item);
+ *palette = 1;
+ palette++;
+ for (i = 0; i < 256; i++)
+ palette[i] = i > 0 && i < 16 ? 0xff : 0;
+ info->pseudo_palette = palette;
info->fbdefio = &data->fb_defio;
info->screen_base = (char __force __iomem *)fb_bitmap;
info->fbops = &picolcdfb_ops;
info->var = picolcdfb_var;
info->fix = picolcdfb_fix;
- info->fix.smem_len = PICOLCDFB_SIZE;
+ info->fix.smem_len = PICOLCDFB_SIZE*8;
info->fix.smem_start = (unsigned long)fb_bitmap;
info->par = data;
info->flags = FBINFO_FLAG_DEFAULT;
@@ -707,18 +829,20 @@
dev_err(dev, "failed to create sysfs attributes\n");
goto err_cleanup;
}
+ fb_deferred_io_init(info);
data->fb_info = info;
error = register_framebuffer(info);
if (error) {
dev_err(dev, "failed to register framebuffer\n");
goto err_sysfs;
}
- fb_deferred_io_init(info);
/* schedule first output of framebuffer */
+ data->fb_force = 1;
schedule_delayed_work(&info->deferred_work, 0);
return 0;
err_sysfs:
+ fb_deferred_io_cleanup(info);
device_remove_file(dev, &dev_attr_fb_update_rate);
err_cleanup:
data->fb_vbitmap = NULL;
@@ -737,19 +861,17 @@
{
struct fb_info *info = data->fb_info;
u8 *fb_vbitmap = data->fb_vbitmap;
- u8 *fb_bitmap = data->fb_bitmap;
if (!info)
return;
+ info->par = NULL;
+ device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate);
+ unregister_framebuffer(info);
data->fb_vbitmap = NULL;
data->fb_bitmap = NULL;
data->fb_bpp = 0;
data->fb_info = NULL;
- device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate);
- fb_deferred_io_cleanup(info);
- unregister_framebuffer(info);
- vfree(fb_bitmap);
kfree(fb_vbitmap);
}
@@ -2566,6 +2688,13 @@
spin_lock_irqsave(&data->lock, flags);
data->status |= PICOLCD_FAILED;
spin_unlock_irqrestore(&data->lock, flags);
+#ifdef CONFIG_HID_PICOLCD_FB
+ /* short-circuit FB as early as possible in order to
+ * avoid long delays if we host console.
+ */
+ if (data->fb_info)
+ data->fb_info->par = NULL;
+#endif
picolcd_exit_devfs(data);
device_remove_file(&hdev->dev, &dev_attr_operation_mode);
@@ -2623,6 +2752,10 @@
static void __exit picolcd_exit(void)
{
hid_unregister_driver(&picolcd_driver);
+#ifdef CONFIG_HID_PICOLCD_FB
+ flush_scheduled_work();
+ WARN_ON(fb_pending);
+#endif
}
module_init(picolcd_init);
diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c
index 17f2dc0..f776957 100644
--- a/drivers/hid/hid-roccat-kone.c
+++ b/drivers/hid/hid-roccat-kone.c
@@ -22,11 +22,6 @@
* Is it possible to remove and reinstall the urb in raw-event- or any
* other handler, or to defer this action to be executed somewhere else?
*
- * TODO implement notification mechanism for overlong macro execution
- * If user wants to execute an overlong macro only the names of macroset
- * and macro are given. Should userland tap hidraw or is there an
- * additional streaming mechanism?
- *
* TODO is it possible to overwrite group for sysfs attributes via udev?
*/
@@ -277,7 +272,7 @@
count = sizeof(struct kone_settings) - off;
mutex_lock(&kone->kone_lock);
- memcpy(buf, &kone->settings + off, count);
+ memcpy(buf, ((char const *)&kone->settings) + off, count);
mutex_unlock(&kone->kone_lock);
return count;
@@ -337,7 +332,7 @@
count = sizeof(struct kone_profile) - off;
mutex_lock(&kone->kone_lock);
- memcpy(buf, &kone->profiles[number - 1], sizeof(struct kone_profile));
+ memcpy(buf, ((char const *)&kone->profiles[number - 1]) + off, count);
mutex_unlock(&kone->kone_lock);
return count;
@@ -623,18 +618,6 @@
}
/*
- * This file is used by userland software to find devices that are handled by
- * this driver. This provides a consistent way for actual and older kernels
- * where this driver replaced usbhid instead of generic-usb.
- * Driver capabilities are determined by version number.
- */
-static ssize_t kone_sysfs_show_driver_version(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, ROCCAT_KONE_DRIVER_VERSION "\n");
-}
-
-/*
* Read actual dpi settings.
* Returns raw value for further processing. Refer to enum kone_polling_rates to
* get real value.
@@ -671,9 +654,6 @@
kone_sysfs_show_startup_profile,
kone_sysfs_set_startup_profile);
-static DEVICE_ATTR(kone_driver_version, 0440,
- kone_sysfs_show_driver_version, NULL);
-
static struct attribute *kone_attributes[] = {
&dev_attr_actual_dpi.attr,
&dev_attr_actual_profile.attr,
@@ -681,7 +661,6 @@
&dev_attr_firmware_version.attr,
&dev_attr_tcu.attr,
&dev_attr_startup_profile.attr,
- &dev_attr_kone_driver_version.attr,
NULL
};
diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h
index 003e6f8..130d656 100644
--- a/drivers/hid/hid-roccat-kone.h
+++ b/drivers/hid/hid-roccat-kone.h
@@ -14,8 +14,6 @@
#include <linux/types.h>
-#define ROCCAT_KONE_DRIVER_VERSION "v0.3.1"
-
#pragma pack(push)
#pragma pack(1)
diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
index e05d48e..f6e80c7 100644
--- a/drivers/hid/hid-roccat.c
+++ b/drivers/hid/hid-roccat.c
@@ -168,7 +168,7 @@
printk(KERN_EMERG "roccat device with minor %d doesn't exist\n",
minor);
error = -ENODEV;
- goto exit_unlock;
+ goto exit_err;
}
if (!device->open++) {
@@ -178,7 +178,7 @@
PM_HINT_FULLON);
if (error < 0) {
--device->open;
- goto exit_unlock;
+ goto exit_err;
}
}
error = device->hid->ll_driver->open(device->hid);
@@ -187,7 +187,7 @@
device->hid->ll_driver->power(device->hid,
PM_HINT_NORMAL);
--device->open;
- goto exit_unlock;
+ goto exit_err;
}
}
@@ -202,6 +202,9 @@
mutex_unlock(&device->readers_lock);
mutex_unlock(&devices_lock);
return error;
+exit_err:
+ kfree(reader);
+ goto exit_unlock;
}
static int roccat_release(struct inode *inode, struct file *file)
diff --git a/drivers/hid/hid-roccat.h b/drivers/hid/hid-roccat.h
index d8aae0c..09e864e 100644
--- a/drivers/hid/hid-roccat.h
+++ b/drivers/hid/hid-roccat.h
@@ -15,7 +15,7 @@
#include <linux/hid.h>
#include <linux/types.h>
-#if defined(CONFIG_HID_ROCCAT) || defined (CONFIG_HID_ROCCAT_MODULE)
+#if defined(CONFIG_HID_ROCCAT) || defined(CONFIG_HID_ROCCAT_MODULE)
int roccat_connect(struct hid_device *hid);
void roccat_disconnect(int minor);
int roccat_report_event(int minor, u8 const *data, int len);
diff --git a/drivers/hid/hid-topseed.c b/drivers/hid/hid-topseed.c
index 2eebdcc..5771f85 100644
--- a/drivers/hid/hid-topseed.c
+++ b/drivers/hid/hid-topseed.c
@@ -6,6 +6,9 @@
*
* Modified to also support BTC "Emprex 3009URF III Vista MCE Remote" by
* Wayne Thomas 2010.
+ *
+ * Modified to support Conceptronic CLLRCMCE by
+ * Kees Bakker 2010.
*/
/*
@@ -34,6 +37,7 @@
case 0x00d: ts_map_key_clear(KEY_MEDIA); break;
case 0x024: ts_map_key_clear(KEY_MENU); break;
case 0x025: ts_map_key_clear(KEY_TV); break;
+ case 0x027: ts_map_key_clear(KEY_MODE); break;
case 0x031: ts_map_key_clear(KEY_AUDIO); break;
case 0x032: ts_map_key_clear(KEY_TEXT); break;
case 0x033: ts_map_key_clear(KEY_CHANNEL); break;
@@ -60,6 +64,7 @@
static const struct hid_device_id ts_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
{ }
};
MODULE_DEVICE_TABLE(hid, ts_devices);
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 1e051f1..807dcd1 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -436,7 +436,7 @@
static const struct hid_device_id wacom_devices[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
+
{ }
};
MODULE_DEVICE_TABLE(hid, wacom_devices);
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 3ccd478..47d70c5 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -46,7 +46,6 @@
{
struct hidraw_list *list = file->private_data;
int ret = 0, len;
- char *report;
DECLARE_WAITQUEUE(wait, current);
mutex_lock(&list->read_mutex);
@@ -84,7 +83,6 @@
if (ret)
goto out;
- report = list->buffer[list->tail].value;
len = list->buffer[list->tail].len > count ?
count : list->buffer[list->tail].len;
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 5f5aa39..2643d31 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -75,6 +75,8 @@
{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_WISEGROUP_LTD2, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_PI_ENGINEERING, USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL, HID_QUIRK_HIDINPUT_FORCE },
+
{ 0, 0 }
};
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index c24d2fa..254a003 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -67,7 +67,7 @@
struct mutex thread_lock;
};
-static struct hiddev *hiddev_table[HIDDEV_MINORS];
+static struct usb_driver hiddev_driver;
/*
* Find a report, given the report's type and ID. The ID can be specified
@@ -265,22 +265,19 @@
static int hiddev_open(struct inode *inode, struct file *file)
{
struct hiddev_list *list;
- int res, i;
+ struct usb_interface *intf;
+ struct hiddev *hiddev;
+ int res;
- /* See comment in hiddev_connect() for BKL explanation */
- lock_kernel();
- i = iminor(inode) - HIDDEV_MINOR_BASE;
-
- if (i >= HIDDEV_MINORS || i < 0 || !hiddev_table[i])
+ intf = usb_find_interface(&hiddev_driver, iminor(inode));
+ if (!intf)
return -ENODEV;
+ hiddev = usb_get_intfdata(intf);
if (!(list = kzalloc(sizeof(struct hiddev_list), GFP_KERNEL)))
return -ENOMEM;
mutex_init(&list->thread_lock);
-
- list->hiddev = hiddev_table[i];
-
-
+ list->hiddev = hiddev;
file->private_data = list;
/*
@@ -289,7 +286,7 @@
*/
if (list->hiddev->exist) {
if (!list->hiddev->open++) {
- res = usbhid_open(hiddev_table[i]->hid);
+ res = usbhid_open(hiddev->hid);
if (res < 0) {
res = -EIO;
goto bail;
@@ -301,12 +298,12 @@
}
spin_lock_irq(&list->hiddev->list_lock);
- list_add_tail(&list->node, &hiddev_table[i]->list);
+ list_add_tail(&list->node, &hiddev->list);
spin_unlock_irq(&list->hiddev->list_lock);
if (!list->hiddev->open++)
if (list->hiddev->exist) {
- struct hid_device *hid = hiddev_table[i]->hid;
+ struct hid_device *hid = hiddev->hid;
res = usbhid_get_power(hid);
if (res < 0) {
res = -EIO;
@@ -314,13 +311,10 @@
}
usbhid_open(hid);
}
-
- unlock_kernel();
return 0;
bail:
file->private_data = NULL;
kfree(list);
- unlock_kernel();
return res;
}
@@ -894,37 +888,14 @@
hid->hiddev = hiddev;
hiddev->hid = hid;
hiddev->exist = 1;
-
- /*
- * BKL here is used to avoid race after usb_register_dev().
- * Once the device node has been created, open() could happen on it.
- * The code below will then fail, as hiddev_table hasn't been
- * updated.
- *
- * The obvious fix -- introducing mutex to guard hiddev_table[]
- * doesn't work, as usb_open() and usb_register_dev() both take
- * minor_rwsem, thus we'll have ABBA deadlock.
- *
- * Before BKL pushdown, usb_open() had been acquiring it in right
- * order, so _open() was safe to use it to protect from this race.
- * Now the order is different, but AB-BA deadlock still doesn't occur
- * as BKL is dropped on schedule() (i.e. while sleeping on
- * minor_rwsem). Fugly.
- */
- lock_kernel();
+ usb_set_intfdata(usbhid->intf, usbhid);
retval = usb_register_dev(usbhid->intf, &hiddev_class);
if (retval) {
err_hid("Not able to get a minor for this device.");
hid->hiddev = NULL;
- unlock_kernel();
kfree(hiddev);
return -1;
- } else {
- hid->minor = usbhid->intf->minor;
- hiddev_table[usbhid->intf->minor - HIDDEV_MINOR_BASE] = hiddev;
}
- unlock_kernel();
-
return 0;
}
@@ -942,7 +913,6 @@
hiddev->exist = 0;
mutex_unlock(&hiddev->existancelock);
- hiddev_table[hiddev->hid->minor - HIDDEV_MINOR_BASE] = NULL;
usb_deregister_dev(usbhid->intf, &hiddev_class);
if (hiddev->open) {
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 895001f..42a0f1d 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -311,6 +311,7 @@
#define HID_QUIRK_HIDDEV_FORCE 0x00000010
#define HID_QUIRK_BADPAD 0x00000020
#define HID_QUIRK_MULTI_INPUT 0x00000040
+#define HID_QUIRK_HIDINPUT_FORCE 0x00000080
#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
#define HID_QUIRK_NO_INIT_REPORTS 0x20000000