drivers/net/wireless/prism54/isl_38xx.h - kernel/msm-4.9 - Gitiles

 /*
  *  Copyright (C) 2002 Intersil Americas Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */

 #ifndef _ISL_38XX_H
 #define _ISL_38XX_H

 #include <asm/io.h>
 #include <asm/byteorder.h>

 #define ISL38XX_CB_RX_QSIZE                     8
 #define ISL38XX_CB_TX_QSIZE                     32

 /* ISL38XX Access Point Specific definitions */
 #define ISL38XX_MAX_WDS_LINKS                   8

 /* ISL38xx Client Specific definitions */
 #define ISL38XX_PSM_ACTIVE_STATE                0
 #define ISL38XX_PSM_POWERSAVE_STATE             1

 /* ISL38XX Host Interface Definitions */
 #define ISL38XX_PCI_MEM_SIZE                    0x02000
 #define ISL38XX_MEMORY_WINDOW_SIZE              0x01000
 #define ISL38XX_DEV_FIRMWARE_ADDRES             0x20000
 #define ISL38XX_WRITEIO_DELAY                   10	/* in us */
 #define ISL38XX_RESET_DELAY                     50	/* in ms */
 #define ISL38XX_WAIT_CYCLE                      10	/* in 10ms */
 #define ISL38XX_MAX_WAIT_CYCLES                 10

 /* PCI Memory Area */
 #define ISL38XX_HARDWARE_REG                    0x0000
 #define ISL38XX_CARDBUS_CIS                     0x0800
 #define ISL38XX_DIRECT_MEM_WIN                  0x1000

 /* Hardware registers */
 #define ISL38XX_DEV_INT_REG                     0x0000
 #define ISL38XX_INT_IDENT_REG                   0x0010
 #define ISL38XX_INT_ACK_REG                     0x0014
 #define ISL38XX_INT_EN_REG                      0x0018
 #define ISL38XX_GEN_PURP_COM_REG_1              0x0020
 #define ISL38XX_GEN_PURP_COM_REG_2              0x0024
 #define ISL38XX_CTRL_BLK_BASE_REG               ISL38XX_GEN_PURP_COM_REG_1
 #define ISL38XX_DIR_MEM_BASE_REG                0x0030
 #define ISL38XX_CTRL_STAT_REG                   0x0078

 /* High end mobos queue up pci writes, the following
  * is used to "read" from after a write to force flush */
 #define ISL38XX_PCI_POSTING_FLUSH		ISL38XX_INT_EN_REG

 /**
  * isl38xx_w32_flush - PCI iomem write helper
  * @base: (host) memory base address of the device
  * @val: 32bit value (host order) to write
  * @offset: byte offset into @base to write value to
  *
  *  This helper takes care of writing a 32bit datum to the
  *  specified offset into the device's pci memory space, and making sure
  *  the pci memory buffers get flushed by performing one harmless read
  *  from the %ISL38XX_PCI_POSTING_FLUSH offset.
  */
 static inline void
 isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
 {
 	writel(val, base + offset);
 	(void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
 }

 /* Device Interrupt register bits */
 #define ISL38XX_DEV_INT_RESET                   0x0001
 #define ISL38XX_DEV_INT_UPDATE                  0x0002
 #define ISL38XX_DEV_INT_WAKEUP                  0x0008
 #define ISL38XX_DEV_INT_SLEEP                   0x0010

 /* Interrupt Identification/Acknowledge/Enable register bits */
 #define ISL38XX_INT_IDENT_UPDATE                0x0002
 #define ISL38XX_INT_IDENT_INIT                  0x0004
 #define ISL38XX_INT_IDENT_WAKEUP                0x0008
 #define ISL38XX_INT_IDENT_SLEEP                 0x0010
 #define ISL38XX_INT_SOURCES                     0x001E

 /* Control/Status register bits */
 /* Looks like there are other meaningful bits
     0x20004400 seen in normal operation,
     0x200044db at 'timeout waiting for mgmt response'
 */
 #define ISL38XX_CTRL_STAT_SLEEPMODE             0x00000200
 #define	ISL38XX_CTRL_STAT_CLKRUN		0x00800000
 #define ISL38XX_CTRL_STAT_RESET                 0x10000000
 #define ISL38XX_CTRL_STAT_RAMBOOT               0x20000000
 #define ISL38XX_CTRL_STAT_STARTHALTED           0x40000000
 #define ISL38XX_CTRL_STAT_HOST_OVERRIDE         0x80000000

 /* Control Block definitions */
 #define ISL38XX_CB_RX_DATA_LQ                   0
 #define ISL38XX_CB_TX_DATA_LQ                   1
 #define ISL38XX_CB_RX_DATA_HQ                   2
 #define ISL38XX_CB_TX_DATA_HQ                   3
 #define ISL38XX_CB_RX_MGMTQ                     4
 #define ISL38XX_CB_TX_MGMTQ                     5
 #define ISL38XX_CB_QCOUNT                       6
 #define ISL38XX_CB_MGMT_QSIZE                   4
 #define ISL38XX_MIN_QTHRESHOLD                  4	/* fragments */

 /* Memory Manager definitions */
 #define MGMT_FRAME_SIZE                         1500	/* >= size struct obj_bsslist */
 #define MGMT_TX_FRAME_COUNT                     24	/* max 4 + spare 4 + 8 init */
 #define MGMT_RX_FRAME_COUNT                     24	/* 4*4 + spare 8 */
 #define MGMT_FRAME_COUNT                        (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
 #define CONTROL_BLOCK_SIZE                      1024	/* should be enough */
 #define PSM_FRAME_SIZE                          1536
 #define PSM_MINIMAL_STATION_COUNT               64
 #define PSM_FRAME_COUNT                         PSM_MINIMAL_STATION_COUNT
 #define PSM_BUFFER_SIZE                         PSM_FRAME_SIZE * PSM_FRAME_COUNT
 #define MAX_TRAP_RX_QUEUE                       4
 #define HOST_MEM_BLOCK                          CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE

 /* Fragment package definitions */
 #define FRAGMENT_FLAG_MF                        0x0001
 #define MAX_FRAGMENT_SIZE                       1536

 /* In monitor mode frames have a header. I don't know exactly how big those
  * frame can be but I've never seen any frame bigger than 1584... :
  */
 #define MAX_FRAGMENT_SIZE_RX	                1600

 typedef struct {
 	__le32 address;		/* physical address on host */
 	__le16 size;		/* packet size */
 	__le16 flags;		/* set of bit-wise flags */
 } isl38xx_fragment;

 struct isl38xx_cb {
 	__le32 driver_curr_frag[ISL38XX_CB_QCOUNT];
 	__le32 device_curr_frag[ISL38XX_CB_QCOUNT];
 	isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
 	isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
 	isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
 	isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
 	isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
 	isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
 };

 typedef struct isl38xx_cb isl38xx_control_block;

 /* determine number of entries currently in queue */
 int isl38xx_in_queue(isl38xx_control_block *cb, int queue);

 void isl38xx_disable_interrupts(void __iomem *);
 void isl38xx_enable_common_interrupts(void __iomem *);

 void isl38xx_handle_sleep_request(isl38xx_control_block *, int *,
 				  void __iomem *);
 void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void __iomem *);
 void isl38xx_trigger_device(int, void __iomem *);
 void isl38xx_interface_reset(void __iomem *, dma_addr_t);

 #endif				/* _ISL_38XX_H */
	/*
	* Copyright (C) 2002 Intersil Americas Inc.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	*/

	#ifndef _ISL_38XX_H
	#define _ISL_38XX_H

	#include <asm/io.h>
	#include <asm/byteorder.h>

	#define ISL38XX_CB_RX_QSIZE 8
	#define ISL38XX_CB_TX_QSIZE 32

	/* ISL38XX Access Point Specific definitions */
	#define ISL38XX_MAX_WDS_LINKS 8

	/* ISL38xx Client Specific definitions */
	#define ISL38XX_PSM_ACTIVE_STATE 0
	#define ISL38XX_PSM_POWERSAVE_STATE 1

	/* ISL38XX Host Interface Definitions */
	#define ISL38XX_PCI_MEM_SIZE 0x02000
	#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000
	#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000
	#define ISL38XX_WRITEIO_DELAY 10 /* in us */
	#define ISL38XX_RESET_DELAY 50 /* in ms */
	#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */
	#define ISL38XX_MAX_WAIT_CYCLES 10

	/* PCI Memory Area */
	#define ISL38XX_HARDWARE_REG 0x0000
	#define ISL38XX_CARDBUS_CIS 0x0800
	#define ISL38XX_DIRECT_MEM_WIN 0x1000

	/* Hardware registers */
	#define ISL38XX_DEV_INT_REG 0x0000
	#define ISL38XX_INT_IDENT_REG 0x0010
	#define ISL38XX_INT_ACK_REG 0x0014
	#define ISL38XX_INT_EN_REG 0x0018
	#define ISL38XX_GEN_PURP_COM_REG_1 0x0020
	#define ISL38XX_GEN_PURP_COM_REG_2 0x0024
	#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1
	#define ISL38XX_DIR_MEM_BASE_REG 0x0030
	#define ISL38XX_CTRL_STAT_REG 0x0078

	/* High end mobos queue up pci writes, the following
	* is used to "read" from after a write to force flush */
	#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG

	/**
	* isl38xx_w32_flush - PCI iomem write helper
	* @base: (host) memory base address of the device
	* @val: 32bit value (host order) to write
	* @offset: byte offset into @base to write value to
	*
	* This helper takes care of writing a 32bit datum to the
	* specified offset into the device's pci memory space, and making sure
	* the pci memory buffers get flushed by performing one harmless read
	* from the %ISL38XX_PCI_POSTING_FLUSH offset.
	*/
	static inline void
	isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
	{
	writel(val, base + offset);
	(void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
	}

	/* Device Interrupt register bits */
	#define ISL38XX_DEV_INT_RESET 0x0001
	#define ISL38XX_DEV_INT_UPDATE 0x0002
	#define ISL38XX_DEV_INT_WAKEUP 0x0008
	#define ISL38XX_DEV_INT_SLEEP 0x0010

	/* Interrupt Identification/Acknowledge/Enable register bits */
	#define ISL38XX_INT_IDENT_UPDATE 0x0002
	#define ISL38XX_INT_IDENT_INIT 0x0004
	#define ISL38XX_INT_IDENT_WAKEUP 0x0008
	#define ISL38XX_INT_IDENT_SLEEP 0x0010
	#define ISL38XX_INT_SOURCES 0x001E

	/* Control/Status register bits */
	/* Looks like there are other meaningful bits
	0x20004400 seen in normal operation,
	0x200044db at 'timeout waiting for mgmt response'
	*/
	#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
	#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
	#define ISL38XX_CTRL_STAT_RESET 0x10000000
	#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
	#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
	#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000

	/* Control Block definitions */
	#define ISL38XX_CB_RX_DATA_LQ 0
	#define ISL38XX_CB_TX_DATA_LQ 1
	#define ISL38XX_CB_RX_DATA_HQ 2
	#define ISL38XX_CB_TX_DATA_HQ 3
	#define ISL38XX_CB_RX_MGMTQ 4
	#define ISL38XX_CB_TX_MGMTQ 5
	#define ISL38XX_CB_QCOUNT 6
	#define ISL38XX_CB_MGMT_QSIZE 4
	#define ISL38XX_MIN_QTHRESHOLD 4 /* fragments */

	/* Memory Manager definitions */
	#define MGMT_FRAME_SIZE 1500 /* >= size struct obj_bsslist */
	#define MGMT_TX_FRAME_COUNT 24 /* max 4 + spare 4 + 8 init */
	#define MGMT_RX_FRAME_COUNT 24 /* 44 + spare 8 /
	#define MGMT_FRAME_COUNT (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
	#define CONTROL_BLOCK_SIZE 1024 /* should be enough */
	#define PSM_FRAME_SIZE 1536
	#define PSM_MINIMAL_STATION_COUNT 64
	#define PSM_FRAME_COUNT PSM_MINIMAL_STATION_COUNT
	#define PSM_BUFFER_SIZE PSM_FRAME_SIZE * PSM_FRAME_COUNT
	#define MAX_TRAP_RX_QUEUE 4
	#define HOST_MEM_BLOCK CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE

	/* Fragment package definitions */
	#define FRAGMENT_FLAG_MF 0x0001
	#define MAX_FRAGMENT_SIZE 1536

	/* In monitor mode frames have a header. I don't know exactly how big those
	* frame can be but I've never seen any frame bigger than 1584... :
	*/
	#define MAX_FRAGMENT_SIZE_RX 1600

	typedef struct {
	__le32 address; /* physical address on host */
	__le16 size; /* packet size */
	__le16 flags; /* set of bit-wise flags */
	} isl38xx_fragment;

	struct isl38xx_cb {
	__le32 driver_curr_frag[ISL38XX_CB_QCOUNT];
	__le32 device_curr_frag[ISL38XX_CB_QCOUNT];
	isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
	isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
	isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
	isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
	isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
	isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
	};

	typedef struct isl38xx_cb isl38xx_control_block;

	/* determine number of entries currently in queue */
	int isl38xx_in_queue(isl38xx_control_block *cb, int queue);

	void isl38xx_disable_interrupts(void __iomem *);
	void isl38xx_enable_common_interrupts(void __iomem *);

	void isl38xx_handle_sleep_request(isl38xx_control_block , int ,
	void __iomem *);
	void isl38xx_handle_wakeup(isl38xx_control_block , int , void __iomem *);
	void isl38xx_trigger_device(int, void __iomem *);
	void isl38xx_interface_reset(void __iomem *, dma_addr_t);

	#endif /* _ISL_38XX_H */