drivers/net/myri10ge/myri10ge_mcp.h - kernel/msm-4.9 - Gitiles

 #ifndef __MYRI10GE_MCP_H__
 #define __MYRI10GE_MCP_H__

 #define MXGEFW_VERSION_MAJOR	1
 #define MXGEFW_VERSION_MINOR	4

 /* 8 Bytes */
 struct mcp_dma_addr {
 	__be32 high;
 	__be32 low;
 };

 /* 4 Bytes */
 struct mcp_slot {
 	__sum16 checksum;
 	__be16 length;
 };

 /* 64 Bytes */
 struct mcp_cmd {
 	__be32 cmd;
 	__be32 data0;		/* will be low portion if data > 32 bits */
 	/* 8 */
 	__be32 data1;		/* will be high portion if data > 32 bits */
 	__be32 data2;		/* currently unused.. */
 	/* 16 */
 	struct mcp_dma_addr response_addr;
 	/* 24 */
 	u8 pad[40];
 };

 /* 8 Bytes */
 struct mcp_cmd_response {
 	__be32 data;
 	__be32 result;
 };

 /*
  * flags used in mcp_kreq_ether_send_t:
  *
  * The SMALL flag is only needed in the first segment. It is raised
  * for packets that are total less or equal 512 bytes.
  *
  * The CKSUM flag must be set in all segments.
  *
  * The PADDED flags is set if the packet needs to be padded, and it
  * must be set for all segments.
  *
  * The  MXGEFW_FLAGS_ALIGN_ODD must be set if the cumulative
  * length of all previous segments was odd.
  */

 #define MXGEFW_FLAGS_SMALL      0x1
 #define MXGEFW_FLAGS_TSO_HDR    0x1
 #define MXGEFW_FLAGS_FIRST      0x2
 #define MXGEFW_FLAGS_ALIGN_ODD  0x4
 #define MXGEFW_FLAGS_CKSUM      0x8
 #define MXGEFW_FLAGS_TSO_LAST   0x8
 #define MXGEFW_FLAGS_NO_TSO     0x10
 #define MXGEFW_FLAGS_TSO_CHOP   0x10
 #define MXGEFW_FLAGS_TSO_PLD    0x20

 #define MXGEFW_SEND_SMALL_SIZE  1520
 #define MXGEFW_MAX_MTU          9400

 union mcp_pso_or_cumlen {
 	u16 pseudo_hdr_offset;
 	u16 cum_len;
 };

 #define	MXGEFW_MAX_SEND_DESC 12
 #define MXGEFW_PAD	    2

 /* 16 Bytes */
 struct mcp_kreq_ether_send {
 	__be32 addr_high;
 	__be32 addr_low;
 	__be16 pseudo_hdr_offset;
 	__be16 length;
 	u8 pad;
 	u8 rdma_count;
 	u8 cksum_offset;	/* where to start computing cksum */
 	u8 flags;		/* as defined above */
 };

 /* 8 Bytes */
 struct mcp_kreq_ether_recv {
 	__be32 addr_high;
 	__be32 addr_low;
 };

 /* Commands */

 #define	MXGEFW_BOOT_HANDOFF	0xfc0000
 #define	MXGEFW_BOOT_DUMMY_RDMA	0xfc01c0

 #define	MXGEFW_ETH_CMD		0xf80000
 #define	MXGEFW_ETH_SEND_4	0x200000
 #define	MXGEFW_ETH_SEND_1	0x240000
 #define	MXGEFW_ETH_SEND_2	0x280000
 #define	MXGEFW_ETH_SEND_3	0x2c0000
 #define	MXGEFW_ETH_RECV_SMALL	0x300000
 #define	MXGEFW_ETH_RECV_BIG	0x340000

 #define	MXGEFW_ETH_SEND(n)		(0x200000 + (((n) & 0x03) * 0x40000))
 #define	MXGEFW_ETH_SEND_OFFSET(n)	(MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)

 enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_NONE = 0,
 	/* Reset the mcp, it is left in a safe state, waiting
 	 * for the driver to set all its parameters */
 	MXGEFW_CMD_RESET,

 	/* get the version number of the current firmware..
 	 * (may be available in the eeprom strings..? */
 	MXGEFW_GET_MCP_VERSION,

 	/* Parameters which must be set by the driver before it can
 	 * issue MXGEFW_CMD_ETHERNET_UP. They persist until the next
 	 * MXGEFW_CMD_RESET is issued */

 	MXGEFW_CMD_SET_INTRQ_DMA,
 	MXGEFW_CMD_SET_BIG_BUFFER_SIZE,	/* in bytes, power of 2 */
 	MXGEFW_CMD_SET_SMALL_BUFFER_SIZE,	/* in bytes */

 	/* Parameters which refer to lanai SRAM addresses where the
 	 * driver must issue PIO writes for various things */

 	MXGEFW_CMD_GET_SEND_OFFSET,
 	MXGEFW_CMD_GET_SMALL_RX_OFFSET,
 	MXGEFW_CMD_GET_BIG_RX_OFFSET,
 	MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
 	MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,

 	/* Parameters which refer to rings stored on the MCP,
 	 * and whose size is controlled by the mcp */

 	MXGEFW_CMD_GET_SEND_RING_SIZE,	/* in bytes */
 	MXGEFW_CMD_GET_RX_RING_SIZE,	/* in bytes */

 	/* Parameters which refer to rings stored in the host,
 	 * and whose size is controlled by the host.  Note that
 	 * all must be physically contiguous and must contain
 	 * a power of 2 number of entries.  */

 	MXGEFW_CMD_SET_INTRQ_SIZE,	/* in bytes */

 	/* command to bring ethernet interface up.  Above parameters
 	 * (plus mtu & mac address) must have been exchanged prior
 	 * to issuing this command  */
 	MXGEFW_CMD_ETHERNET_UP,

 	/* command to bring ethernet interface down.  No further sends
 	 * or receives may be processed until an MXGEFW_CMD_ETHERNET_UP
 	 * is issued, and all interrupt queues must be flushed prior
 	 * to ack'ing this command */

 	MXGEFW_CMD_ETHERNET_DOWN,

 	/* commands the driver may issue live, without resetting
 	 * the nic.  Note that increasing the mtu "live" should
 	 * only be done if the driver has already supplied buffers
 	 * sufficiently large to handle the new mtu.  Decreasing
 	 * the mtu live is safe */

 	MXGEFW_CMD_SET_MTU,
 	MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET,	/* in microseconds */
 	MXGEFW_CMD_SET_STATS_INTERVAL,	/* in microseconds */
 	MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,	/* replaced by SET_STATS_DMA_V2 */

 	MXGEFW_ENABLE_PROMISC,
 	MXGEFW_DISABLE_PROMISC,
 	MXGEFW_SET_MAC_ADDRESS,

 	MXGEFW_ENABLE_FLOW_CONTROL,
 	MXGEFW_DISABLE_FLOW_CONTROL,

 	/* do a DMA test
 	 * data0,data1 = DMA address
 	 * data2       = RDMA length (MSH), WDMA length (LSH)
 	 * command return data = repetitions (MSH), 0.5-ms ticks (LSH)
 	 */
 	MXGEFW_DMA_TEST,

 	MXGEFW_ENABLE_ALLMULTI,
 	MXGEFW_DISABLE_ALLMULTI,

 	/* returns MXGEFW_CMD_ERROR_MULTICAST
 	 * if there is no room in the cache
 	 * data0,MSH(data1) = multicast group address */
 	MXGEFW_JOIN_MULTICAST_GROUP,
 	/* returns MXGEFW_CMD_ERROR_MULTICAST
 	 * if the address is not in the cache,
 	 * or is equal to FF-FF-FF-FF-FF-FF
 	 * data0,MSH(data1) = multicast group address */
 	MXGEFW_LEAVE_MULTICAST_GROUP,
 	MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,

 	MXGEFW_CMD_SET_STATS_DMA_V2,
 	/* data0, data1 = bus addr,
 	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
 	 * adding new stuff to mcp_irq_data without changing the ABI */
 };

 enum myri10ge_mcp_cmd_status {
 	MXGEFW_CMD_OK = 0,
 	MXGEFW_CMD_UNKNOWN,
 	MXGEFW_CMD_ERROR_RANGE,
 	MXGEFW_CMD_ERROR_BUSY,
 	MXGEFW_CMD_ERROR_EMPTY,
 	MXGEFW_CMD_ERROR_CLOSED,
 	MXGEFW_CMD_ERROR_HASH_ERROR,
 	MXGEFW_CMD_ERROR_BAD_PORT,
 	MXGEFW_CMD_ERROR_RESOURCES,
 	MXGEFW_CMD_ERROR_MULTICAST
 };

 #define MXGEFW_OLD_IRQ_DATA_LEN 40

 struct mcp_irq_data {
 	/* add new counters at the beginning */
 	__be32 future_use[5];
 	__be32 dropped_multicast_filtered;
 	/* 40 Bytes */
 	__be32 send_done_count;

 	__be32 link_up;
 	__be32 dropped_link_overflow;
 	__be32 dropped_link_error_or_filtered;
 	__be32 dropped_runt;
 	__be32 dropped_overrun;
 	__be32 dropped_no_small_buffer;
 	__be32 dropped_no_big_buffer;
 	__be32 rdma_tags_available;

 	u8 tx_stopped;
 	u8 link_down;
 	u8 stats_updated;
 	u8 valid;
 };

 #endif				/* __MYRI10GE_MCP_H__ */
	#ifndef __MYRI10GE_MCP_H__
	#define __MYRI10GE_MCP_H__

	#define MXGEFW_VERSION_MAJOR 1
	#define MXGEFW_VERSION_MINOR 4

	/* 8 Bytes */
	struct mcp_dma_addr {
	__be32 high;
	__be32 low;
	};

	/* 4 Bytes */
	struct mcp_slot {
	__sum16 checksum;
	__be16 length;
	};

	/* 64 Bytes */
	struct mcp_cmd {
	__be32 cmd;
	__be32 data0; /* will be low portion if data > 32 bits */
	/* 8 */
	__be32 data1; /* will be high portion if data > 32 bits */
	__be32 data2; /* currently unused.. */
	/* 16 */
	struct mcp_dma_addr response_addr;
	/* 24 */
	u8 pad[40];
	};

	/* 8 Bytes */
	struct mcp_cmd_response {
	__be32 data;
	__be32 result;
	};

	/*
	* flags used in mcp_kreq_ether_send_t:
	*
	* The SMALL flag is only needed in the first segment. It is raised
	* for packets that are total less or equal 512 bytes.
	*
	* The CKSUM flag must be set in all segments.
	*
	* The PADDED flags is set if the packet needs to be padded, and it
	* must be set for all segments.
	*
	* The MXGEFW_FLAGS_ALIGN_ODD must be set if the cumulative
	* length of all previous segments was odd.
	*/

	#define MXGEFW_FLAGS_SMALL 0x1
	#define MXGEFW_FLAGS_TSO_HDR 0x1
	#define MXGEFW_FLAGS_FIRST 0x2
	#define MXGEFW_FLAGS_ALIGN_ODD 0x4
	#define MXGEFW_FLAGS_CKSUM 0x8
	#define MXGEFW_FLAGS_TSO_LAST 0x8
	#define MXGEFW_FLAGS_NO_TSO 0x10
	#define MXGEFW_FLAGS_TSO_CHOP 0x10
	#define MXGEFW_FLAGS_TSO_PLD 0x20

	#define MXGEFW_SEND_SMALL_SIZE 1520
	#define MXGEFW_MAX_MTU 9400

	union mcp_pso_or_cumlen {
	u16 pseudo_hdr_offset;
	u16 cum_len;
	};

	#define MXGEFW_MAX_SEND_DESC 12
	#define MXGEFW_PAD 2

	/* 16 Bytes */
	struct mcp_kreq_ether_send {
	__be32 addr_high;
	__be32 addr_low;
	__be16 pseudo_hdr_offset;
	__be16 length;
	u8 pad;
	u8 rdma_count;
	u8 cksum_offset; /* where to start computing cksum */
	u8 flags; /* as defined above */
	};

	/* 8 Bytes */
	struct mcp_kreq_ether_recv {
	__be32 addr_high;
	__be32 addr_low;
	};

	/* Commands */

	#define MXGEFW_BOOT_HANDOFF 0xfc0000
	#define MXGEFW_BOOT_DUMMY_RDMA 0xfc01c0

	#define MXGEFW_ETH_CMD 0xf80000
	#define MXGEFW_ETH_SEND_4 0x200000
	#define MXGEFW_ETH_SEND_1 0x240000
	#define MXGEFW_ETH_SEND_2 0x280000
	#define MXGEFW_ETH_SEND_3 0x2c0000
	#define MXGEFW_ETH_RECV_SMALL 0x300000
	#define MXGEFW_ETH_RECV_BIG 0x340000

	#define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000))
	#define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)

	enum myri10ge_mcp_cmd_type {
	MXGEFW_CMD_NONE = 0,
	/* Reset the mcp, it is left in a safe state, waiting
	* for the driver to set all its parameters */
	MXGEFW_CMD_RESET,

	/* get the version number of the current firmware..
	* (may be available in the eeprom strings..? */
	MXGEFW_GET_MCP_VERSION,

	/* Parameters which must be set by the driver before it can
	* issue MXGEFW_CMD_ETHERNET_UP. They persist until the next
	* MXGEFW_CMD_RESET is issued */

	MXGEFW_CMD_SET_INTRQ_DMA,
	MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */
	MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */

	/* Parameters which refer to lanai SRAM addresses where the
	* driver must issue PIO writes for various things */

	MXGEFW_CMD_GET_SEND_OFFSET,
	MXGEFW_CMD_GET_SMALL_RX_OFFSET,
	MXGEFW_CMD_GET_BIG_RX_OFFSET,
	MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
	MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,

	/* Parameters which refer to rings stored on the MCP,
	* and whose size is controlled by the mcp */

	MXGEFW_CMD_GET_SEND_RING_SIZE, /* in bytes */
	MXGEFW_CMD_GET_RX_RING_SIZE, /* in bytes */

	/* Parameters which refer to rings stored in the host,
	* and whose size is controlled by the host. Note that
	* all must be physically contiguous and must contain
	* a power of 2 number of entries. */

	MXGEFW_CMD_SET_INTRQ_SIZE, /* in bytes */

	/* command to bring ethernet interface up. Above parameters
	* (plus mtu & mac address) must have been exchanged prior
	* to issuing this command */
	MXGEFW_CMD_ETHERNET_UP,

	/* command to bring ethernet interface down. No further sends
	* or receives may be processed until an MXGEFW_CMD_ETHERNET_UP
	* is issued, and all interrupt queues must be flushed prior
	* to ack'ing this command */

	MXGEFW_CMD_ETHERNET_DOWN,

	/* commands the driver may issue live, without resetting
	* the nic. Note that increasing the mtu "live" should
	* only be done if the driver has already supplied buffers
	* sufficiently large to handle the new mtu. Decreasing
	* the mtu live is safe */

	MXGEFW_CMD_SET_MTU,
	MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, /* in microseconds */
	MXGEFW_CMD_SET_STATS_INTERVAL, /* in microseconds */
	MXGEFW_CMD_SET_STATS_DMA_OBSOLETE, /* replaced by SET_STATS_DMA_V2 */

	MXGEFW_ENABLE_PROMISC,
	MXGEFW_DISABLE_PROMISC,
	MXGEFW_SET_MAC_ADDRESS,

	MXGEFW_ENABLE_FLOW_CONTROL,
	MXGEFW_DISABLE_FLOW_CONTROL,

	/* do a DMA test
	* data0,data1 = DMA address
	* data2 = RDMA length (MSH), WDMA length (LSH)
	* command return data = repetitions (MSH), 0.5-ms ticks (LSH)
	*/
	MXGEFW_DMA_TEST,

	MXGEFW_ENABLE_ALLMULTI,
	MXGEFW_DISABLE_ALLMULTI,

	/* returns MXGEFW_CMD_ERROR_MULTICAST
	* if there is no room in the cache
	* data0,MSH(data1) = multicast group address */
	MXGEFW_JOIN_MULTICAST_GROUP,
	/* returns MXGEFW_CMD_ERROR_MULTICAST
	* if the address is not in the cache,
	* or is equal to FF-FF-FF-FF-FF-FF
	* data0,MSH(data1) = multicast group address */
	MXGEFW_LEAVE_MULTICAST_GROUP,
	MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,

	MXGEFW_CMD_SET_STATS_DMA_V2,
	/* data0, data1 = bus addr,
	* data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
	* adding new stuff to mcp_irq_data without changing the ABI */
	};

	enum myri10ge_mcp_cmd_status {
	MXGEFW_CMD_OK = 0,
	MXGEFW_CMD_UNKNOWN,
	MXGEFW_CMD_ERROR_RANGE,
	MXGEFW_CMD_ERROR_BUSY,
	MXGEFW_CMD_ERROR_EMPTY,
	MXGEFW_CMD_ERROR_CLOSED,
	MXGEFW_CMD_ERROR_HASH_ERROR,
	MXGEFW_CMD_ERROR_BAD_PORT,
	MXGEFW_CMD_ERROR_RESOURCES,
	MXGEFW_CMD_ERROR_MULTICAST
	};

	#define MXGEFW_OLD_IRQ_DATA_LEN 40

	struct mcp_irq_data {
	/* add new counters at the beginning */
	__be32 future_use[5];
	__be32 dropped_multicast_filtered;
	/* 40 Bytes */
	__be32 send_done_count;

	__be32 link_up;
	__be32 dropped_link_overflow;
	__be32 dropped_link_error_or_filtered;
	__be32 dropped_runt;
	__be32 dropped_overrun;
	__be32 dropped_no_small_buffer;
	__be32 dropped_no_big_buffer;
	__be32 rdma_tags_available;

	u8 tx_stopped;
	u8 link_down;
	u8 stats_updated;
	u8 valid;
	};

	#endif /* __MYRI10GE_MCP_H__ */