drivers/net/sfc/tenxpress.c - kernel/msm-4.9 - Gitiles

 /****************************************************************************
  * Driver for Solarflare 802.3an compliant PHY
  * Copyright 2007 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation, incorporated herein by reference.
  */

 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include "efx.h"
 #include "gmii.h"
 #include "mdio_10g.h"
 #include "falcon.h"
 #include "phy.h"
 #include "falcon_hwdefs.h"
 #include "boards.h"
 #include "mac.h"

 /* We expect these MMDs to be in the package */
 /* AN not here as mdio_check_mmds() requires STAT2 support */
 #define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS0_PMAPMD | \
 				 MDIO_MMDREG_DEVS0_PCS    | \
 				 MDIO_MMDREG_DEVS0_PHYXS)

 #define TENXPRESS_LOOPBACKS ((1 << LOOPBACK_PHYXS) |	\
 			     (1 << LOOPBACK_PCS) |	\
 			     (1 << LOOPBACK_PMAPMD) |	\
 			     (1 << LOOPBACK_NETWORK))

 /* We complain if we fail to see the link partner as 10G capable this many
  * times in a row (must be > 1 as sampling the autoneg. registers is racy)
  */
 #define MAX_BAD_LP_TRIES	(5)

 /* Extended control register */
 #define	PMA_PMD_XCONTROL_REG 0xc000
 #define	PMA_PMD_LNPGA_POWERDOWN_LBN 8
 #define	PMA_PMD_LNPGA_POWERDOWN_WIDTH 1

 /* extended status register */
 #define PMA_PMD_XSTATUS_REG 0xc001
 #define PMA_PMD_XSTAT_FLP_LBN   (12)

 /* LED control register */
 #define PMA_PMD_LED_CTRL_REG	(0xc007)
 #define PMA_PMA_LED_ACTIVITY_LBN	(3)

 /* LED function override register */
 #define PMA_PMD_LED_OVERR_REG	(0xc009)
 /* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
 #define PMA_PMD_LED_LINK_LBN	(0)
 #define PMA_PMD_LED_SPEED_LBN	(2)
 #define PMA_PMD_LED_TX_LBN	(4)
 #define PMA_PMD_LED_RX_LBN	(6)
 /* Override settings */
 #define	PMA_PMD_LED_AUTO	(0)	/* H/W control */
 #define	PMA_PMD_LED_ON		(1)
 #define	PMA_PMD_LED_OFF		(2)
 #define PMA_PMD_LED_FLASH	(3)
 /* All LEDs under hardware control */
 #define PMA_PMD_LED_FULL_AUTO	(0)
 /* Green and Amber under hardware control, Red off */
 #define PMA_PMD_LED_DEFAULT	(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)


 /* Self test (BIST) control register */
 #define PMA_PMD_BIST_CTRL_REG	(0xc014)
 #define PMA_PMD_BIST_BER_LBN	(2)	/* Run BER test */
 #define PMA_PMD_BIST_CONT_LBN	(1)	/* Run continuous BIST until cleared */
 #define PMA_PMD_BIST_SINGLE_LBN	(0)	/* Run 1 BIST iteration (self clears) */
 /* Self test status register */
 #define PMA_PMD_BIST_STAT_REG	(0xc015)
 #define PMA_PMD_BIST_ENX_LBN	(3)
 #define PMA_PMD_BIST_PMA_LBN	(2)
 #define PMA_PMD_BIST_RXD_LBN	(1)
 #define PMA_PMD_BIST_AFE_LBN	(0)

 /* Special Software reset register */
 #define PMA_PMD_EXT_CTRL_REG 49152
 #define PMA_PMD_EXT_SSR_LBN 15

 #define BIST_MAX_DELAY	(1000)
 #define BIST_POLL_DELAY	(10)

 /* Misc register defines */
 #define PCS_CLOCK_CTRL_REG 0xd801
 #define PLL312_RST_N_LBN 2

 #define PCS_SOFT_RST2_REG 0xd806
 #define SERDES_RST_N_LBN 13
 #define XGXS_RST_N_LBN 12

 #define	PCS_TEST_SELECT_REG 0xd807	/* PRM 10.5.8 */
 #define	CLK312_EN_LBN 3

 /* PHYXS registers */
 #define PHYXS_TEST1         (49162)
 #define LOOPBACK_NEAR_LBN   (8)
 #define LOOPBACK_NEAR_WIDTH (1)

 /* Boot status register */
 #define PCS_BOOT_STATUS_REG	(0xd000)
 #define PCS_BOOT_FATAL_ERR_LBN	(0)
 #define PCS_BOOT_PROGRESS_LBN	(1)
 #define PCS_BOOT_PROGRESS_WIDTH	(2)
 #define PCS_BOOT_COMPLETE_LBN	(3)
 #define PCS_BOOT_MAX_DELAY	(100)
 #define PCS_BOOT_POLL_DELAY	(10)

 /* Time to wait between powering down the LNPGA and turning off the power
  * rails */
 #define LNPGA_PDOWN_WAIT	(HZ / 5)

 static int crc_error_reset_threshold = 100;
 module_param(crc_error_reset_threshold, int, 0644);
 MODULE_PARM_DESC(crc_error_reset_threshold,
 		 "Max number of CRC errors before XAUI reset");

 struct tenxpress_phy_data {
 	enum tenxpress_state state;
 	enum efx_loopback_mode loopback_mode;
 	atomic_t bad_crc_count;
 	int tx_disabled;
 	int bad_lp_tries;
 };

 static int tenxpress_state_is(struct efx_nic *efx, int state)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	return (phy_data != NULL) && (state == phy_data->state);
 }

 void tenxpress_set_state(struct efx_nic *efx,
 				enum tenxpress_state state)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	if (phy_data != NULL)
 		phy_data->state = state;
 }

 void tenxpress_crc_err(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	if (phy_data != NULL)
 		atomic_inc(&phy_data->bad_crc_count);
 }

 /* Check that the C166 has booted successfully */
 static int tenxpress_phy_check(struct efx_nic *efx)
 {
 	int phy_id = efx->mii.phy_id;
 	int count = PCS_BOOT_MAX_DELAY / PCS_BOOT_POLL_DELAY;
 	int boot_stat;

 	/* Wait for the boot to complete (or not) */
 	while (count) {
 		boot_stat = mdio_clause45_read(efx, phy_id,
 					       MDIO_MMD_PCS,
 					       PCS_BOOT_STATUS_REG);
 		if (boot_stat & (1 << PCS_BOOT_COMPLETE_LBN))
 			break;
 		count--;
 		udelay(PCS_BOOT_POLL_DELAY);
 	}

 	if (!count) {
 		EFX_ERR(efx, "%s: PHY boot timed out. Last status "
 			"%x\n", __func__,
 			(boot_stat >> PCS_BOOT_PROGRESS_LBN) &
 			((1 << PCS_BOOT_PROGRESS_WIDTH) - 1));
 		return -ETIMEDOUT;
 	}

 	return 0;
 }

 static void tenxpress_reset_xaui(struct efx_nic *efx);

 static int tenxpress_init(struct efx_nic *efx)
 {
 	int rc, reg;

 	/* Turn on the clock  */
 	reg = (1 << CLK312_EN_LBN);
 	mdio_clause45_write(efx, efx->mii.phy_id,
 			    MDIO_MMD_PCS, PCS_TEST_SELECT_REG, reg);

 	rc = tenxpress_phy_check(efx);
 	if (rc < 0)
 		return rc;

 	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
 	reg = mdio_clause45_read(efx, efx->mii.phy_id,
 				 MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG);
 	reg |= (1 << PMA_PMA_LED_ACTIVITY_LBN);
 	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
 			    PMA_PMD_LED_CTRL_REG, reg);

 	reg = PMA_PMD_LED_DEFAULT;
 	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
 			    PMA_PMD_LED_OVERR_REG, reg);

 	return rc;
 }

 static int tenxpress_phy_init(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data;
 	int rc = 0;

 	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
 	efx->phy_data = phy_data;

 	tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);

 	if (!sfe4001_phy_flash_cfg) {
 		rc = mdio_clause45_wait_reset_mmds(efx,
 						   TENXPRESS_REQUIRED_DEVS);
 		if (rc < 0)
 			goto fail;
 	}

 	rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
 	if (rc < 0)
 		goto fail;

 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		goto fail;

 	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */

 	/* Let XGXS and SerDes out of reset and resets 10XPress */
 	falcon_reset_xaui(efx);

 	return 0;

  fail:
 	kfree(efx->phy_data);
 	efx->phy_data = NULL;
 	return rc;
 }

 static int tenxpress_special_reset(struct efx_nic *efx)
 {
 	int rc, reg;

 	EFX_TRACE(efx, "%s\n", __func__);

 	/* Initiate reset */
 	reg = mdio_clause45_read(efx, efx->mii.phy_id,
 				 MDIO_MMD_PMAPMD, PMA_PMD_EXT_CTRL_REG);
 	reg |= (1 << PMA_PMD_EXT_SSR_LBN);
 	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
 			    PMA_PMD_EXT_CTRL_REG, reg);

 	msleep(200);

 	/* Wait for the blocks to come out of reset */
 	rc = mdio_clause45_wait_reset_mmds(efx,
 					   TENXPRESS_REQUIRED_DEVS);
 	if (rc < 0)
 		return rc;

 	/* Try and reconfigure the device */
 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		return rc;

 	return 0;
 }

 static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp)
 {
 	struct tenxpress_phy_data *pd = efx->phy_data;
 	int reg;

 	/* Nothing to do if all is well and was previously so. */
 	if (!(bad_lp || pd->bad_lp_tries))
 		return;

 	reg = mdio_clause45_read(efx, efx->mii.phy_id,
 				 MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG);

 	if (bad_lp)
 		pd->bad_lp_tries++;
 	else
 		pd->bad_lp_tries = 0;

 	if (pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
 		pd->bad_lp_tries = 0;	/* Restart count */
 		reg &= ~(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN);
 		reg |= (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN);
 		EFX_ERR(efx, "This NIC appears to be plugged into"
 			" a port that is not 10GBASE-T capable.\n"
 			" This PHY is 10GBASE-T ONLY, so no link can"
 			" be established.\n");
 	} else {
 		reg |= (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN);
 	}
 	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
 			    PMA_PMD_LED_OVERR_REG, reg);
 }

 /* Check link status and return a boolean OK value. If the link is NOT
  * OK we have a quick rummage round to see if we appear to be plugged
  * into a non-10GBT port and if so warn the user that they won't get
  * link any time soon as we are 10GBT only, unless caller specified
  * not to do this check (it isn't useful in loopback) */
 static int tenxpress_link_ok(struct efx_nic *efx, int check_lp)
 {
 	int ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS);

 	if (ok) {
 		tenxpress_set_bad_lp(efx, 0);
 	} else if (check_lp) {
 		/* Are we plugged into the wrong sort of link? */
 		int bad_lp = 0;
 		int phy_id = efx->mii.phy_id;
 		int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
 						 MDIO_AN_STATUS);
 		int xphy_stat = mdio_clause45_read(efx, phy_id,
 						   MDIO_MMD_PMAPMD,
 						   PMA_PMD_XSTATUS_REG);
 		/* Are we plugged into anything that sends FLPs? If
 		 * not we can't distinguish between not being plugged
 		 * in and being plugged into a non-AN antique. The FLP
 		 * bit has the advantage of not clearing when autoneg
 		 * restarts. */
 		if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) {
 			tenxpress_set_bad_lp(efx, 0);
 			return ok;
 		}

 		/* If it can do 10GBT it must be XNP capable */
 		bad_lp = !(an_stat & (1 << MDIO_AN_STATUS_XNP_LBN));
 		if (!bad_lp && (an_stat & (1 << MDIO_AN_STATUS_PAGE_LBN))) {
 			bad_lp = !(mdio_clause45_read(efx, phy_id,
 					MDIO_MMD_AN, MDIO_AN_10GBT_STATUS) &
 					(1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN));
 		}
 		tenxpress_set_bad_lp(efx, bad_lp);
 	}
 	return ok;
 }

 static void tenxpress_phyxs_loopback(struct efx_nic *efx)
 {
 	int phy_id = efx->mii.phy_id;
 	int ctrl1, ctrl2;

 	ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
 					   PHYXS_TEST1);
 	if (efx->loopback_mode == LOOPBACK_PHYXS)
 		ctrl2 |= (1 << LOOPBACK_NEAR_LBN);
 	else
 		ctrl2 &= ~(1 << LOOPBACK_NEAR_LBN);
 	if (ctrl1 != ctrl2)
 		mdio_clause45_write(efx, phy_id, MDIO_MMD_PHYXS,
 				    PHYXS_TEST1, ctrl2);
 }

 static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	int loop_change = LOOPBACK_OUT_OF(phy_data, efx,
 					  TENXPRESS_LOOPBACKS);

 	if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL))
 		return;

 	/* When coming out of transmit disable, coming out of low power
 	 * mode, or moving out of any PHY internal loopback mode,
 	 * perform a special software reset */
 	if ((phy_data->tx_disabled && !efx->tx_disabled) ||
 	    loop_change) {
 		tenxpress_special_reset(efx);
 		falcon_reset_xaui(efx);
 	}

 	mdio_clause45_transmit_disable(efx);
 	mdio_clause45_phy_reconfigure(efx);
 	tenxpress_phyxs_loopback(efx);

 	phy_data->tx_disabled = efx->tx_disabled;
 	phy_data->loopback_mode = efx->loopback_mode;
 	efx->link_up = tenxpress_link_ok(efx, 0);
 	efx->link_options = GM_LPA_10000FULL;
 }

 static void tenxpress_phy_clear_interrupt(struct efx_nic *efx)
 {
 	/* Nothing done here - LASI interrupts aren't reliable so poll  */
 }


 /* Poll PHY for interrupt */
 static int tenxpress_phy_check_hw(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	int phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL);
 	int link_ok;

 	link_ok = phy_up && tenxpress_link_ok(efx, 1);

 	if (link_ok != efx->link_up)
 		falcon_xmac_sim_phy_event(efx);

 	/* Nothing to check if we've already shut down the PHY */
 	if (!phy_up)
 		return 0;

 	if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
 		EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
 		falcon_reset_xaui(efx);
 		atomic_set(&phy_data->bad_crc_count, 0);
 	}

 	return 0;
 }

 static void tenxpress_phy_fini(struct efx_nic *efx)
 {
 	int reg;

 	/* Power down the LNPGA */
 	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
 	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
 			    PMA_PMD_XCONTROL_REG, reg);

 	/* Waiting here ensures that the board fini, which can turn off the
 	 * power to the PHY, won't get run until the LNPGA powerdown has been
 	 * given long enough to complete. */
 	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */

 	kfree(efx->phy_data);
 	efx->phy_data = NULL;
 }


 /* Set the RX and TX LEDs and Link LED flashing. The other LEDs
  * (which probably aren't wired anyway) are left in AUTO mode */
 void tenxpress_phy_blink(struct efx_nic *efx, int blink)
 {
 	int reg;

 	if (blink)
 		reg = (PMA_PMD_LED_FLASH << PMA_PMD_LED_TX_LBN) |
 			(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN) |
 			(PMA_PMD_LED_FLASH << PMA_PMD_LED_LINK_LBN);
 	else
 		reg = PMA_PMD_LED_DEFAULT;

 	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
 			    PMA_PMD_LED_OVERR_REG, reg);
 }

 static void tenxpress_reset_xaui(struct efx_nic *efx)
 {
 	int phy = efx->mii.phy_id;
 	int clk_ctrl, test_select, soft_rst2;

 	/* Real work is done on clock_ctrl other resets are thought to be
 	 * optional but make the reset more reliable
 	 */

 	/* Read */
 	clk_ctrl = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
 				      PCS_CLOCK_CTRL_REG);
 	test_select = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
 					 PCS_TEST_SELECT_REG);
 	soft_rst2 = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
 				       PCS_SOFT_RST2_REG);

 	/* Put in reset */
 	test_select &= ~(1 << CLK312_EN_LBN);
 	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
 			    PCS_TEST_SELECT_REG, test_select);

 	soft_rst2 &= ~((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN));
 	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
 			    PCS_SOFT_RST2_REG, soft_rst2);

 	clk_ctrl &= ~(1 << PLL312_RST_N_LBN);
 	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
 			    PCS_CLOCK_CTRL_REG, clk_ctrl);
 	udelay(10);

 	/* Remove reset */
 	clk_ctrl |= (1 << PLL312_RST_N_LBN);
 	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
 			    PCS_CLOCK_CTRL_REG, clk_ctrl);
 	udelay(10);

 	soft_rst2 |= ((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN));
 	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
 			    PCS_SOFT_RST2_REG, soft_rst2);
 	udelay(10);

 	test_select |= (1 << CLK312_EN_LBN);
 	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
 			    PCS_TEST_SELECT_REG, test_select);
 	udelay(10);
 }

 struct efx_phy_operations falcon_tenxpress_phy_ops = {
 	.init             = tenxpress_phy_init,
 	.reconfigure      = tenxpress_phy_reconfigure,
 	.check_hw         = tenxpress_phy_check_hw,
 	.fini             = tenxpress_phy_fini,
 	.clear_interrupt  = tenxpress_phy_clear_interrupt,
 	.reset_xaui       = tenxpress_reset_xaui,
 	.mmds             = TENXPRESS_REQUIRED_DEVS,
 	.loopbacks        = TENXPRESS_LOOPBACKS,
 };
	/****************************************************************************
	* Driver for Solarflare 802.3an compliant PHY
	* Copyright 2007 Solarflare Communications Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published
	* by the Free Software Foundation, incorporated herein by reference.
	*/

	#include <linux/delay.h>
	#include <linux/seq_file.h>
	#include "efx.h"
	#include "gmii.h"
	#include "mdio_10g.h"
	#include "falcon.h"
	#include "phy.h"
	#include "falcon_hwdefs.h"
	#include "boards.h"
	#include "mac.h"

	/* We expect these MMDs to be in the package */
	/* AN not here as mdio_check_mmds() requires STAT2 support */
	#define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS0_PMAPMD \| \
	MDIO_MMDREG_DEVS0_PCS \| \
	MDIO_MMDREG_DEVS0_PHYXS)

	#define TENXPRESS_LOOPBACKS ((1 << LOOPBACK_PHYXS) \| \
	(1 << LOOPBACK_PCS) \| \
	(1 << LOOPBACK_PMAPMD) \| \
	(1 << LOOPBACK_NETWORK))

	/* We complain if we fail to see the link partner as 10G capable this many
	* times in a row (must be > 1 as sampling the autoneg. registers is racy)
	*/
	#define MAX_BAD_LP_TRIES (5)

	/* Extended control register */
	#define PMA_PMD_XCONTROL_REG 0xc000
	#define PMA_PMD_LNPGA_POWERDOWN_LBN 8
	#define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1

	/* extended status register */
	#define PMA_PMD_XSTATUS_REG 0xc001
	#define PMA_PMD_XSTAT_FLP_LBN (12)

	/* LED control register */
	#define PMA_PMD_LED_CTRL_REG (0xc007)
	#define PMA_PMA_LED_ACTIVITY_LBN (3)

	/* LED function override register */
	#define PMA_PMD_LED_OVERR_REG (0xc009)
	/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
	#define PMA_PMD_LED_LINK_LBN (0)
	#define PMA_PMD_LED_SPEED_LBN (2)
	#define PMA_PMD_LED_TX_LBN (4)
	#define PMA_PMD_LED_RX_LBN (6)
	/* Override settings */
	#define PMA_PMD_LED_AUTO (0) /* H/W control */
	#define PMA_PMD_LED_ON (1)
	#define PMA_PMD_LED_OFF (2)
	#define PMA_PMD_LED_FLASH (3)
	/* All LEDs under hardware control */
	#define PMA_PMD_LED_FULL_AUTO (0)
	/* Green and Amber under hardware control, Red off */
	#define PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)


	/* Self test (BIST) control register */
	#define PMA_PMD_BIST_CTRL_REG (0xc014)
	#define PMA_PMD_BIST_BER_LBN (2) /* Run BER test */
	#define PMA_PMD_BIST_CONT_LBN (1) /* Run continuous BIST until cleared */
	#define PMA_PMD_BIST_SINGLE_LBN (0) /* Run 1 BIST iteration (self clears) */
	/* Self test status register */
	#define PMA_PMD_BIST_STAT_REG (0xc015)
	#define PMA_PMD_BIST_ENX_LBN (3)
	#define PMA_PMD_BIST_PMA_LBN (2)
	#define PMA_PMD_BIST_RXD_LBN (1)
	#define PMA_PMD_BIST_AFE_LBN (0)

	/* Special Software reset register */
	#define PMA_PMD_EXT_CTRL_REG 49152
	#define PMA_PMD_EXT_SSR_LBN 15

	#define BIST_MAX_DELAY (1000)
	#define BIST_POLL_DELAY (10)

	/* Misc register defines */
	#define PCS_CLOCK_CTRL_REG 0xd801
	#define PLL312_RST_N_LBN 2

	#define PCS_SOFT_RST2_REG 0xd806
	#define SERDES_RST_N_LBN 13
	#define XGXS_RST_N_LBN 12

	#define PCS_TEST_SELECT_REG 0xd807 /* PRM 10.5.8 */
	#define CLK312_EN_LBN 3

	/* PHYXS registers */
	#define PHYXS_TEST1 (49162)
	#define LOOPBACK_NEAR_LBN (8)
	#define LOOPBACK_NEAR_WIDTH (1)

	/* Boot status register */
	#define PCS_BOOT_STATUS_REG (0xd000)
	#define PCS_BOOT_FATAL_ERR_LBN (0)
	#define PCS_BOOT_PROGRESS_LBN (1)
	#define PCS_BOOT_PROGRESS_WIDTH (2)
	#define PCS_BOOT_COMPLETE_LBN (3)
	#define PCS_BOOT_MAX_DELAY (100)
	#define PCS_BOOT_POLL_DELAY (10)

	/* Time to wait between powering down the LNPGA and turning off the power
	* rails */
	#define LNPGA_PDOWN_WAIT (HZ / 5)

	static int crc_error_reset_threshold = 100;
	module_param(crc_error_reset_threshold, int, 0644);
	MODULE_PARM_DESC(crc_error_reset_threshold,
	"Max number of CRC errors before XAUI reset");

	struct tenxpress_phy_data {
	enum tenxpress_state state;
	enum efx_loopback_mode loopback_mode;
	atomic_t bad_crc_count;
	int tx_disabled;
	int bad_lp_tries;
	};

	static int tenxpress_state_is(struct efx_nic *efx, int state)
	{
	struct tenxpress_phy_data *phy_data = efx->phy_data;
	return (phy_data != NULL) && (state == phy_data->state);
	}

	void tenxpress_set_state(struct efx_nic *efx,
	enum tenxpress_state state)
	{
	struct tenxpress_phy_data *phy_data = efx->phy_data;
	if (phy_data != NULL)
	phy_data->state = state;
	}

	void tenxpress_crc_err(struct efx_nic *efx)
	{
	struct tenxpress_phy_data *phy_data = efx->phy_data;
	if (phy_data != NULL)
	atomic_inc(&phy_data->bad_crc_count);
	}

	/* Check that the C166 has booted successfully */
	static int tenxpress_phy_check(struct efx_nic *efx)
	{
	int phy_id = efx->mii.phy_id;
	int count = PCS_BOOT_MAX_DELAY / PCS_BOOT_POLL_DELAY;
	int boot_stat;

	/* Wait for the boot to complete (or not) */
	while (count) {
	boot_stat = mdio_clause45_read(efx, phy_id,
	MDIO_MMD_PCS,
	PCS_BOOT_STATUS_REG);
	if (boot_stat & (1 << PCS_BOOT_COMPLETE_LBN))
	break;
	count--;
	udelay(PCS_BOOT_POLL_DELAY);
	}

	if (!count) {
	EFX_ERR(efx, "%s: PHY boot timed out. Last status "
	"%x\n", __func__,
	(boot_stat >> PCS_BOOT_PROGRESS_LBN) &
	((1 << PCS_BOOT_PROGRESS_WIDTH) - 1));
	return -ETIMEDOUT;
	}

	return 0;
	}

	static void tenxpress_reset_xaui(struct efx_nic *efx);

	static int tenxpress_init(struct efx_nic *efx)
	{
	int rc, reg;

	/* Turn on the clock */
	reg = (1 << CLK312_EN_LBN);
	mdio_clause45_write(efx, efx->mii.phy_id,
	MDIO_MMD_PCS, PCS_TEST_SELECT_REG, reg);

	rc = tenxpress_phy_check(efx);
	if (rc < 0)
	return rc;

	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
	reg = mdio_clause45_read(efx, efx->mii.phy_id,
	MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG);
	reg \|= (1 << PMA_PMA_LED_ACTIVITY_LBN);
	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
	PMA_PMD_LED_CTRL_REG, reg);

	reg = PMA_PMD_LED_DEFAULT;
	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
	PMA_PMD_LED_OVERR_REG, reg);

	return rc;
	}

	static int tenxpress_phy_init(struct efx_nic *efx)
	{
	struct tenxpress_phy_data *phy_data;
	int rc = 0;

	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
	efx->phy_data = phy_data;

	tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);

	if (!sfe4001_phy_flash_cfg) {
	rc = mdio_clause45_wait_reset_mmds(efx,
	TENXPRESS_REQUIRED_DEVS);
	if (rc < 0)
	goto fail;
	}

	rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
	if (rc < 0)
	goto fail;

	rc = tenxpress_init(efx);
	if (rc < 0)
	goto fail;

	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */

	/* Let XGXS and SerDes out of reset and resets 10XPress */
	falcon_reset_xaui(efx);

	return 0;

	fail:
	kfree(efx->phy_data);
	efx->phy_data = NULL;
	return rc;
	}

	static int tenxpress_special_reset(struct efx_nic *efx)
	{
	int rc, reg;

	EFX_TRACE(efx, "%s\n", __func__);

	/* Initiate reset */
	reg = mdio_clause45_read(efx, efx->mii.phy_id,
	MDIO_MMD_PMAPMD, PMA_PMD_EXT_CTRL_REG);
	reg \|= (1 << PMA_PMD_EXT_SSR_LBN);
	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
	PMA_PMD_EXT_CTRL_REG, reg);

	msleep(200);

	/* Wait for the blocks to come out of reset */
	rc = mdio_clause45_wait_reset_mmds(efx,
	TENXPRESS_REQUIRED_DEVS);
	if (rc < 0)
	return rc;

	/* Try and reconfigure the device */
	rc = tenxpress_init(efx);
	if (rc < 0)
	return rc;

	return 0;
	}

	static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp)
	{
	struct tenxpress_phy_data *pd = efx->phy_data;
	int reg;

	/* Nothing to do if all is well and was previously so. */
	if (!(bad_lp \|\| pd->bad_lp_tries))
	return;

	reg = mdio_clause45_read(efx, efx->mii.phy_id,
	MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG);

	if (bad_lp)
	pd->bad_lp_tries++;
	else
	pd->bad_lp_tries = 0;

	if (pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
	pd->bad_lp_tries = 0; /* Restart count */
	reg &= ~(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN);
	reg \|= (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN);
	EFX_ERR(efx, "This NIC appears to be plugged into"
	" a port that is not 10GBASE-T capable.\n"
	" This PHY is 10GBASE-T ONLY, so no link can"
	" be established.\n");
	} else {
	reg \|= (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN);
	}
	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
	PMA_PMD_LED_OVERR_REG, reg);
	}

	/* Check link status and return a boolean OK value. If the link is NOT
	* OK we have a quick rummage round to see if we appear to be plugged
	* into a non-10GBT port and if so warn the user that they won't get
	* link any time soon as we are 10GBT only, unless caller specified
	* not to do this check (it isn't useful in loopback) */
	static int tenxpress_link_ok(struct efx_nic *efx, int check_lp)
	{
	int ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS);

	if (ok) {
	tenxpress_set_bad_lp(efx, 0);
	} else if (check_lp) {
	/* Are we plugged into the wrong sort of link? */
	int bad_lp = 0;
	int phy_id = efx->mii.phy_id;
	int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
	MDIO_AN_STATUS);
	int xphy_stat = mdio_clause45_read(efx, phy_id,
	MDIO_MMD_PMAPMD,
	PMA_PMD_XSTATUS_REG);
	/* Are we plugged into anything that sends FLPs? If
	* not we can't distinguish between not being plugged
	* in and being plugged into a non-AN antique. The FLP
	* bit has the advantage of not clearing when autoneg
	* restarts. */
	if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) {
	tenxpress_set_bad_lp(efx, 0);
	return ok;
	}

	/* If it can do 10GBT it must be XNP capable */
	bad_lp = !(an_stat & (1 << MDIO_AN_STATUS_XNP_LBN));
	if (!bad_lp && (an_stat & (1 << MDIO_AN_STATUS_PAGE_LBN))) {
	bad_lp = !(mdio_clause45_read(efx, phy_id,
	MDIO_MMD_AN, MDIO_AN_10GBT_STATUS) &
	(1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN));
	}
	tenxpress_set_bad_lp(efx, bad_lp);
	}
	return ok;
	}

	static void tenxpress_phyxs_loopback(struct efx_nic *efx)
	{
	int phy_id = efx->mii.phy_id;
	int ctrl1, ctrl2;

	ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
	PHYXS_TEST1);
	if (efx->loopback_mode == LOOPBACK_PHYXS)
	ctrl2 \|= (1 << LOOPBACK_NEAR_LBN);
	else
	ctrl2 &= ~(1 << LOOPBACK_NEAR_LBN);
	if (ctrl1 != ctrl2)
	mdio_clause45_write(efx, phy_id, MDIO_MMD_PHYXS,
	PHYXS_TEST1, ctrl2);
	}

	static void tenxpress_phy_reconfigure(struct efx_nic *efx)
	{
	struct tenxpress_phy_data *phy_data = efx->phy_data;
	int loop_change = LOOPBACK_OUT_OF(phy_data, efx,
	TENXPRESS_LOOPBACKS);

	if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL))
	return;

	/* When coming out of transmit disable, coming out of low power
	* mode, or moving out of any PHY internal loopback mode,
	* perform a special software reset */
	if ((phy_data->tx_disabled && !efx->tx_disabled) \|\|
	loop_change) {
	tenxpress_special_reset(efx);
	falcon_reset_xaui(efx);
	}

	mdio_clause45_transmit_disable(efx);
	mdio_clause45_phy_reconfigure(efx);
	tenxpress_phyxs_loopback(efx);

	phy_data->tx_disabled = efx->tx_disabled;
	phy_data->loopback_mode = efx->loopback_mode;
	efx->link_up = tenxpress_link_ok(efx, 0);
	efx->link_options = GM_LPA_10000FULL;
	}

	static void tenxpress_phy_clear_interrupt(struct efx_nic *efx)
	{
	/* Nothing done here - LASI interrupts aren't reliable so poll */
	}


	/* Poll PHY for interrupt */
	static int tenxpress_phy_check_hw(struct efx_nic *efx)
	{
	struct tenxpress_phy_data *phy_data = efx->phy_data;
	int phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL);
	int link_ok;

	link_ok = phy_up && tenxpress_link_ok(efx, 1);

	if (link_ok != efx->link_up)
	falcon_xmac_sim_phy_event(efx);

	/* Nothing to check if we've already shut down the PHY */
	if (!phy_up)
	return 0;

	if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
	EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
	falcon_reset_xaui(efx);
	atomic_set(&phy_data->bad_crc_count, 0);
	}

	return 0;
	}

	static void tenxpress_phy_fini(struct efx_nic *efx)
	{
	int reg;

	/* Power down the LNPGA */
	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
	PMA_PMD_XCONTROL_REG, reg);

	/* Waiting here ensures that the board fini, which can turn off the
	* power to the PHY, won't get run until the LNPGA powerdown has been
	* given long enough to complete. */
	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */

	kfree(efx->phy_data);
	efx->phy_data = NULL;
	}


	/* Set the RX and TX LEDs and Link LED flashing. The other LEDs
	* (which probably aren't wired anyway) are left in AUTO mode */
	void tenxpress_phy_blink(struct efx_nic *efx, int blink)
	{
	int reg;

	if (blink)
	reg = (PMA_PMD_LED_FLASH << PMA_PMD_LED_TX_LBN) \|
	(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN) \|
	(PMA_PMD_LED_FLASH << PMA_PMD_LED_LINK_LBN);
	else
	reg = PMA_PMD_LED_DEFAULT;

	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
	PMA_PMD_LED_OVERR_REG, reg);
	}

	static void tenxpress_reset_xaui(struct efx_nic *efx)
	{
	int phy = efx->mii.phy_id;
	int clk_ctrl, test_select, soft_rst2;

	/* Real work is done on clock_ctrl other resets are thought to be
	* optional but make the reset more reliable
	*/

	/* Read */
	clk_ctrl = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
	PCS_CLOCK_CTRL_REG);
	test_select = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
	PCS_TEST_SELECT_REG);
	soft_rst2 = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
	PCS_SOFT_RST2_REG);

	/* Put in reset */
	test_select &= ~(1 << CLK312_EN_LBN);
	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
	PCS_TEST_SELECT_REG, test_select);

	soft_rst2 &= ~((1 << XGXS_RST_N_LBN) \| (1 << SERDES_RST_N_LBN));
	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
	PCS_SOFT_RST2_REG, soft_rst2);

	clk_ctrl &= ~(1 << PLL312_RST_N_LBN);
	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
	PCS_CLOCK_CTRL_REG, clk_ctrl);
	udelay(10);

	/* Remove reset */
	clk_ctrl \|= (1 << PLL312_RST_N_LBN);
	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
	PCS_CLOCK_CTRL_REG, clk_ctrl);
	udelay(10);

	soft_rst2 \|= ((1 << XGXS_RST_N_LBN) \| (1 << SERDES_RST_N_LBN));
	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
	PCS_SOFT_RST2_REG, soft_rst2);
	udelay(10);

	test_select \|= (1 << CLK312_EN_LBN);
	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
	PCS_TEST_SELECT_REG, test_select);
	udelay(10);
	}

	struct efx_phy_operations falcon_tenxpress_phy_ops = {
	.init = tenxpress_phy_init,
	.reconfigure = tenxpress_phy_reconfigure,
	.check_hw = tenxpress_phy_check_hw,
	.fini = tenxpress_phy_fini,
	.clear_interrupt = tenxpress_phy_clear_interrupt,
	.reset_xaui = tenxpress_reset_xaui,
	.mmds = TENXPRESS_REQUIRED_DEVS,
	.loopbacks = TENXPRESS_LOOPBACKS,
	};