| /* |
| * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. |
| */ |
| |
| /* |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <mach/hardware.h> |
| #include "crm_regs.h" |
| |
| /* set cpu low power mode before WFI instruction. This function is called |
| * mx5 because it can be used for mx50, mx51, and mx53.*/ |
| void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) |
| { |
| u32 plat_lpc, arm_srpgcr, ccm_clpcr; |
| u32 empgc0, empgc1; |
| int stop_mode = 0; |
| |
| /* always allow platform to issue a deep sleep mode request */ |
| plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) & |
| ~(MXC_CORTEXA8_PLAT_LPC_DSM); |
| ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK); |
| arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR); |
| empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR); |
| empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR); |
| |
| switch (mode) { |
| case WAIT_CLOCKED: |
| break; |
| case WAIT_UNCLOCKED: |
| ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; |
| break; |
| case WAIT_UNCLOCKED_POWER_OFF: |
| case STOP_POWER_OFF: |
| plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM |
| | MXC_CORTEXA8_PLAT_LPC_DBG_DSM; |
| if (mode == WAIT_UNCLOCKED_POWER_OFF) { |
| ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; |
| ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY; |
| ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS; |
| stop_mode = 0; |
| } else { |
| ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; |
| ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET; |
| ccm_clpcr |= MXC_CCM_CLPCR_VSTBY; |
| ccm_clpcr |= MXC_CCM_CLPCR_SBYOS; |
| stop_mode = 1; |
| } |
| arm_srpgcr |= MXC_SRPGCR_PCR; |
| |
| if (tzic_enable_wake(1) != 0) |
| return; |
| break; |
| case STOP_POWER_ON: |
| ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; |
| break; |
| default: |
| printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode); |
| return; |
| } |
| |
| __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC); |
| __raw_writel(ccm_clpcr, MXC_CCM_CLPCR); |
| __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR); |
| |
| /* Enable NEON SRPG for all but MX50TO1.0. */ |
| if (mx50_revision() != IMX_CHIP_REVISION_1_0) |
| __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR); |
| |
| if (stop_mode) { |
| empgc0 |= MXC_SRPGCR_PCR; |
| empgc1 |= MXC_SRPGCR_PCR; |
| |
| __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR); |
| __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); |
| } |
| } |