drivers/pci/access.c - kernel/msm-4.9 - Gitiles

 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/wait.h>

 #include "pci.h"

 /*
  * This interrupt-safe spinlock protects all accesses to PCI
  * configuration space.
  */

 static DEFINE_SPINLOCK(pci_lock);

 /*
  *  Wrappers for all PCI configuration access functions.  They just check
  *  alignment, do locking and call the low-level functions pointed to
  *  by pci_dev->ops.
  */

 #define PCI_byte_BAD 0
 #define PCI_word_BAD (pos & 1)
 #define PCI_dword_BAD (pos & 3)

 #define PCI_OP_READ(size,type,len) \
 int pci_bus_read_config_##size \
 	(struct pci_bus *bus, unsigned int devfn, int pos, type *value)	\
 {									\
 	int res;							\
 	unsigned long flags;						\
 	u32 data = 0;							\
 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
 	spin_lock_irqsave(&pci_lock, flags);				\
 	res = bus->ops->read(bus, devfn, pos, len, &data);		\
 	*value = (type)data;						\
 	spin_unlock_irqrestore(&pci_lock, flags);			\
 	return res;							\
 }

 #define PCI_OP_WRITE(size,type,len) \
 int pci_bus_write_config_##size \
 	(struct pci_bus *bus, unsigned int devfn, int pos, type value)	\
 {									\
 	int res;							\
 	unsigned long flags;						\
 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
 	spin_lock_irqsave(&pci_lock, flags);				\
 	res = bus->ops->write(bus, devfn, pos, len, value);		\
 	spin_unlock_irqrestore(&pci_lock, flags);			\
 	return res;							\
 }

 PCI_OP_READ(byte, u8, 1)
 PCI_OP_READ(word, u16, 2)
 PCI_OP_READ(dword, u32, 4)
 PCI_OP_WRITE(byte, u8, 1)
 PCI_OP_WRITE(word, u16, 2)
 PCI_OP_WRITE(dword, u32, 4)

 EXPORT_SYMBOL(pci_bus_read_config_byte);
 EXPORT_SYMBOL(pci_bus_read_config_word);
 EXPORT_SYMBOL(pci_bus_read_config_dword);
 EXPORT_SYMBOL(pci_bus_write_config_byte);
 EXPORT_SYMBOL(pci_bus_write_config_word);
 EXPORT_SYMBOL(pci_bus_write_config_dword);


 /**
  * pci_read_vpd - Read one entry from Vital Product Data
  * @dev:	pci device struct
  * @pos:	offset in vpd space
  * @count:	number of bytes to read
  * @buf:	pointer to where to store result
  *
  */
 ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
 {
 	if (!dev->vpd || !dev->vpd->ops)
 		return -ENODEV;
 	return dev->vpd->ops->read(dev, pos, count, buf);
 }
 EXPORT_SYMBOL(pci_read_vpd);

 /**
  * pci_write_vpd - Write entry to Vital Product Data
  * @dev:	pci device struct
  * @pos:	offset in vpd space
  * @count:	number of bytes to read
  * @val:	value to write
  *
  */
 ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
 {
 	if (!dev->vpd || !dev->vpd->ops)
 		return -ENODEV;
 	return dev->vpd->ops->write(dev, pos, count, buf);
 }
 EXPORT_SYMBOL(pci_write_vpd);

 /*
  * The following routines are to prevent the user from accessing PCI config
  * space when it's unsafe to do so.  Some devices require this during BIST and
  * we're required to prevent it during D-state transitions.
  *
  * We have a bit per device to indicate it's blocked and a global wait queue
  * for callers to sleep on until devices are unblocked.
  */
 static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);

 static noinline void pci_wait_ucfg(struct pci_dev *dev)
 {
 	DECLARE_WAITQUEUE(wait, current);

 	__add_wait_queue(&pci_ucfg_wait, &wait);
 	do {
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		spin_unlock_irq(&pci_lock);
 		schedule();
 		spin_lock_irq(&pci_lock);
 	} while (dev->block_ucfg_access);
 	__remove_wait_queue(&pci_ucfg_wait, &wait);
 }

 #define PCI_USER_READ_CONFIG(size,type)					\
 int pci_user_read_config_##size						\
 	(struct pci_dev *dev, int pos, type *val)			\
 {									\
 	int ret = 0;							\
 	u32 data = -1;							\
 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
 	spin_lock_irq(&pci_lock);					\
 	if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev);	\
 	ret = dev->bus->ops->read(dev->bus, dev->devfn,			\
 					pos, sizeof(type), &data);	\
 	spin_unlock_irq(&pci_lock);					\
 	*val = (type)data;						\
 	return ret;							\
 }

 #define PCI_USER_WRITE_CONFIG(size,type)				\
 int pci_user_write_config_##size					\
 	(struct pci_dev *dev, int pos, type val)			\
 {									\
 	int ret = -EIO;							\
 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
 	spin_lock_irq(&pci_lock);					\
 	if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev);	\
 	ret = dev->bus->ops->write(dev->bus, dev->devfn,		\
 					pos, sizeof(type), val);	\
 	spin_unlock_irq(&pci_lock);					\
 	return ret;							\
 }

 PCI_USER_READ_CONFIG(byte, u8)
 PCI_USER_READ_CONFIG(word, u16)
 PCI_USER_READ_CONFIG(dword, u32)
 PCI_USER_WRITE_CONFIG(byte, u8)
 PCI_USER_WRITE_CONFIG(word, u16)
 PCI_USER_WRITE_CONFIG(dword, u32)

 /* VPD access through PCI 2.2+ VPD capability */

 #define PCI_VPD_PCI22_SIZE (PCI_VPD_ADDR_MASK + 1)

 struct pci_vpd_pci22 {
 	struct pci_vpd base;
 	struct mutex lock;
 	u16	flag;
 	bool	busy;
 	u8	cap;
 };

 /*
  * Wait for last operation to complete.
  * This code has to spin since there is no other notification from the PCI
  * hardware. Since the VPD is often implemented by serial attachment to an
  * EEPROM, it may take many milliseconds to complete.
  */
 static int pci_vpd_pci22_wait(struct pci_dev *dev)
 {
 	struct pci_vpd_pci22 *vpd =
 		container_of(dev->vpd, struct pci_vpd_pci22, base);
 	unsigned long timeout = jiffies + HZ/20 + 2;
 	u16 status;
 	int ret;

 	if (!vpd->busy)
 		return 0;

 	for (;;) {
 		ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
 						&status);
 		if (ret)
 			return ret;

 		if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
 			vpd->busy = false;
 			return 0;
 		}

 		if (time_after(jiffies, timeout))
 			return -ETIMEDOUT;
 		if (fatal_signal_pending(current))
 			return -EINTR;
 		if (!cond_resched())
 			udelay(10);
 	}
 }

 static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count,
 				  void *arg)
 {
 	struct pci_vpd_pci22 *vpd =
 		container_of(dev->vpd, struct pci_vpd_pci22, base);
 	int ret;
 	loff_t end = pos + count;
 	u8 *buf = arg;

 	if (pos < 0 || pos > vpd->base.len || end > vpd->base.len)
 		return -EINVAL;

 	if (mutex_lock_killable(&vpd->lock))
 		return -EINTR;

 	ret = pci_vpd_pci22_wait(dev);
 	if (ret < 0)
 		goto out;

 	while (pos < end) {
 		u32 val;
 		unsigned int i, skip;

 		ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
 						 pos & ~3);
 		if (ret < 0)
 			break;
 		vpd->busy = true;
 		vpd->flag = PCI_VPD_ADDR_F;
 		ret = pci_vpd_pci22_wait(dev);
 		if (ret < 0)
 			break;

 		ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val);
 		if (ret < 0)
 			break;

 		skip = pos & 3;
 		for (i = 0;  i < sizeof(u32); i++) {
 			if (i >= skip) {
 				*buf++ = val;
 				if (++pos == end)
 					break;
 			}
 			val >>= 8;
 		}
 	}
 out:
 	mutex_unlock(&vpd->lock);
 	return ret ? ret : count;
 }

 static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count,
 				   const void *arg)
 {
 	struct pci_vpd_pci22 *vpd =
 		container_of(dev->vpd, struct pci_vpd_pci22, base);
 	const u8 *buf = arg;
 	loff_t end = pos + count;
 	int ret = 0;

 	if (pos < 0 || (pos & 3) || (count & 3) || end > vpd->base.len)
 		return -EINVAL;

 	if (mutex_lock_killable(&vpd->lock))
 		return -EINTR;

 	ret = pci_vpd_pci22_wait(dev);
 	if (ret < 0)
 		goto out;

 	while (pos < end) {
 		u32 val;

 		val = *buf++;
 		val |= *buf++ << 8;
 		val |= *buf++ << 16;
 		val |= *buf++ << 24;

 		ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val);
 		if (ret < 0)
 			break;
 		ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
 						 pos | PCI_VPD_ADDR_F);
 		if (ret < 0)
 			break;

 		vpd->busy = true;
 		vpd->flag = 0;
 		ret = pci_vpd_pci22_wait(dev);

 		pos += sizeof(u32);
 	}
 out:
 	mutex_unlock(&vpd->lock);
 	return ret ? ret : count;
 }

 static void pci_vpd_pci22_release(struct pci_dev *dev)
 {
 	kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
 }

 static const struct pci_vpd_ops pci_vpd_pci22_ops = {
 	.read = pci_vpd_pci22_read,
 	.write = pci_vpd_pci22_write,
 	.release = pci_vpd_pci22_release,
 };

 int pci_vpd_pci22_init(struct pci_dev *dev)
 {
 	struct pci_vpd_pci22 *vpd;
 	u8 cap;

 	cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
 	if (!cap)
 		return -ENODEV;
 	vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC);
 	if (!vpd)
 		return -ENOMEM;

 	vpd->base.len = PCI_VPD_PCI22_SIZE;
 	vpd->base.ops = &pci_vpd_pci22_ops;
 	mutex_init(&vpd->lock);
 	vpd->cap = cap;
 	vpd->busy = false;
 	dev->vpd = &vpd->base;
 	return 0;
 }

 /**
  * pci_vpd_truncate - Set available Vital Product Data size
  * @dev:	pci device struct
  * @size:	available memory in bytes
  *
  * Adjust size of available VPD area.
  */
 int pci_vpd_truncate(struct pci_dev *dev, size_t size)
 {
 	if (!dev->vpd)
 		return -EINVAL;

 	/* limited by the access method */
 	if (size > dev->vpd->len)
 		return -EINVAL;

 	dev->vpd->len = size;
 	if (dev->vpd->attr)
 		dev->vpd->attr->size = size;

 	return 0;
 }
 EXPORT_SYMBOL(pci_vpd_truncate);

 /**
  * pci_block_user_cfg_access - Block userspace PCI config reads/writes
  * @dev:	pci device struct
  *
  * When user access is blocked, any reads or writes to config space will
  * sleep until access is unblocked again.  We don't allow nesting of
  * block/unblock calls.
  */
 void pci_block_user_cfg_access(struct pci_dev *dev)
 {
 	unsigned long flags;
 	int was_blocked;

 	spin_lock_irqsave(&pci_lock, flags);
 	was_blocked = dev->block_ucfg_access;
 	dev->block_ucfg_access = 1;
 	spin_unlock_irqrestore(&pci_lock, flags);

 	/* If we BUG() inside the pci_lock, we're guaranteed to hose
 	 * the machine */
 	BUG_ON(was_blocked);
 }
 EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);

 /**
  * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
  * @dev:	pci device struct
  *
  * This function allows userspace PCI config accesses to resume.
  */
 void pci_unblock_user_cfg_access(struct pci_dev *dev)
 {
 	unsigned long flags;

 	spin_lock_irqsave(&pci_lock, flags);

 	/* This indicates a problem in the caller, but we don't need
 	 * to kill them, unlike a double-block above. */
 	WARN_ON(!dev->block_ucfg_access);

 	dev->block_ucfg_access = 0;
 	wake_up_all(&pci_ucfg_wait);
 	spin_unlock_irqrestore(&pci_lock, flags);
 }
 EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
	#include <linux/delay.h>
	#include <linux/pci.h>
	#include <linux/module.h>
	#include <linux/sched.h>
	#include <linux/ioport.h>
	#include <linux/wait.h>

	#include "pci.h"

	/*
	* This interrupt-safe spinlock protects all accesses to PCI
	* configuration space.
	*/

	static DEFINE_SPINLOCK(pci_lock);

	/*
	* Wrappers for all PCI configuration access functions. They just check
	* alignment, do locking and call the low-level functions pointed to
	* by pci_dev->ops.
	*/

	#define PCI_byte_BAD 0
	#define PCI_word_BAD (pos & 1)
	#define PCI_dword_BAD (pos & 3)

	#define PCI_OP_READ(size,type,len) \
	int pci_bus_read_config_##size \
	(struct pci_bus bus, unsigned int devfn, int pos, type value) \
	{ \
	int res; \
	unsigned long flags; \
	u32 data = 0; \
	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
	spin_lock_irqsave(&pci_lock, flags); \
	res = bus->ops->read(bus, devfn, pos, len, &data); \
	*value = (type)data; \
	spin_unlock_irqrestore(&pci_lock, flags); \
	return res; \
	}

	#define PCI_OP_WRITE(size,type,len) \
	int pci_bus_write_config_##size \
	(struct pci_bus *bus, unsigned int devfn, int pos, type value) \
	{ \
	int res; \
	unsigned long flags; \
	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
	spin_lock_irqsave(&pci_lock, flags); \
	res = bus->ops->write(bus, devfn, pos, len, value); \
	spin_unlock_irqrestore(&pci_lock, flags); \
	return res; \
	}

	PCI_OP_READ(byte, u8, 1)
	PCI_OP_READ(word, u16, 2)
	PCI_OP_READ(dword, u32, 4)
	PCI_OP_WRITE(byte, u8, 1)
	PCI_OP_WRITE(word, u16, 2)
	PCI_OP_WRITE(dword, u32, 4)

	EXPORT_SYMBOL(pci_bus_read_config_byte);
	EXPORT_SYMBOL(pci_bus_read_config_word);
	EXPORT_SYMBOL(pci_bus_read_config_dword);
	EXPORT_SYMBOL(pci_bus_write_config_byte);
	EXPORT_SYMBOL(pci_bus_write_config_word);
	EXPORT_SYMBOL(pci_bus_write_config_dword);


	/**
	* pci_read_vpd - Read one entry from Vital Product Data
	* @dev: pci device struct
	* @pos: offset in vpd space
	* @count: number of bytes to read
	* @buf: pointer to where to store result
	*
	*/
	ssize_t pci_read_vpd(struct pci_dev dev, loff_t pos, size_t count, void buf)
	{
	if (!dev->vpd \|\| !dev->vpd->ops)
	return -ENODEV;
	return dev->vpd->ops->read(dev, pos, count, buf);
	}
	EXPORT_SYMBOL(pci_read_vpd);

	/**
	* pci_write_vpd - Write entry to Vital Product Data
	* @dev: pci device struct
	* @pos: offset in vpd space
	* @count: number of bytes to read
	* @val: value to write
	*
	*/
	ssize_t pci_write_vpd(struct pci_dev dev, loff_t pos, size_t count, const void buf)
	{
	if (!dev->vpd \|\| !dev->vpd->ops)
	return -ENODEV;
	return dev->vpd->ops->write(dev, pos, count, buf);
	}
	EXPORT_SYMBOL(pci_write_vpd);

	/*
	* The following routines are to prevent the user from accessing PCI config
	* space when it's unsafe to do so. Some devices require this during BIST and
	* we're required to prevent it during D-state transitions.
	*
	* We have a bit per device to indicate it's blocked and a global wait queue
	* for callers to sleep on until devices are unblocked.
	*/
	static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);

	static noinline void pci_wait_ucfg(struct pci_dev *dev)
	{
	DECLARE_WAITQUEUE(wait, current);

	__add_wait_queue(&pci_ucfg_wait, &wait);
	do {
	set_current_state(TASK_UNINTERRUPTIBLE);
	spin_unlock_irq(&pci_lock);
	schedule();
	spin_lock_irq(&pci_lock);
	} while (dev->block_ucfg_access);
	__remove_wait_queue(&pci_ucfg_wait, &wait);
	}

	#define PCI_USER_READ_CONFIG(size,type) \
	int pci_user_read_config_##size \
	(struct pci_dev dev, int pos, type val) \
	{ \
	int ret = 0; \
	u32 data = -1; \
	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
	spin_lock_irq(&pci_lock); \
	if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
	ret = dev->bus->ops->read(dev->bus, dev->devfn, \
	pos, sizeof(type), &data); \
	spin_unlock_irq(&pci_lock); \
	*val = (type)data; \
	return ret; \
	}

	#define PCI_USER_WRITE_CONFIG(size,type) \
	int pci_user_write_config_##size \
	(struct pci_dev *dev, int pos, type val) \
	{ \
	int ret = -EIO; \
	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
	spin_lock_irq(&pci_lock); \
	if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
	ret = dev->bus->ops->write(dev->bus, dev->devfn, \
	pos, sizeof(type), val); \
	spin_unlock_irq(&pci_lock); \
	return ret; \
	}

	PCI_USER_READ_CONFIG(byte, u8)
	PCI_USER_READ_CONFIG(word, u16)
	PCI_USER_READ_CONFIG(dword, u32)
	PCI_USER_WRITE_CONFIG(byte, u8)
	PCI_USER_WRITE_CONFIG(word, u16)
	PCI_USER_WRITE_CONFIG(dword, u32)

	/* VPD access through PCI 2.2+ VPD capability */

	#define PCI_VPD_PCI22_SIZE (PCI_VPD_ADDR_MASK + 1)

	struct pci_vpd_pci22 {
	struct pci_vpd base;
	struct mutex lock;
	u16 flag;
	bool busy;
	u8 cap;
	};

	/*
	* Wait for last operation to complete.
	* This code has to spin since there is no other notification from the PCI
	* hardware. Since the VPD is often implemented by serial attachment to an
	* EEPROM, it may take many milliseconds to complete.
	*/
	static int pci_vpd_pci22_wait(struct pci_dev *dev)
	{
	struct pci_vpd_pci22 *vpd =
	container_of(dev->vpd, struct pci_vpd_pci22, base);
	unsigned long timeout = jiffies + HZ/20 + 2;
	u16 status;
	int ret;

	if (!vpd->busy)
	return 0;

	for (;;) {
	ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
	&status);
	if (ret)
	return ret;

	if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
	vpd->busy = false;
	return 0;
	}

	if (time_after(jiffies, timeout))
	return -ETIMEDOUT;
	if (fatal_signal_pending(current))
	return -EINTR;
	if (!cond_resched())
	udelay(10);
	}
	}

	static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count,
	void *arg)
	{
	struct pci_vpd_pci22 *vpd =
	container_of(dev->vpd, struct pci_vpd_pci22, base);
	int ret;
	loff_t end = pos + count;
	u8 *buf = arg;

	if (pos < 0 \|\| pos > vpd->base.len \|\| end > vpd->base.len)
	return -EINVAL;

	if (mutex_lock_killable(&vpd->lock))
	return -EINTR;

	ret = pci_vpd_pci22_wait(dev);
	if (ret < 0)
	goto out;

	while (pos < end) {
	u32 val;
	unsigned int i, skip;

	ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
	pos & ~3);
	if (ret < 0)
	break;
	vpd->busy = true;
	vpd->flag = PCI_VPD_ADDR_F;
	ret = pci_vpd_pci22_wait(dev);
	if (ret < 0)
	break;

	ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val);
	if (ret < 0)
	break;

	skip = pos & 3;
	for (i = 0; i < sizeof(u32); i++) {
	if (i >= skip) {
	*buf++ = val;
	if (++pos == end)
	break;
	}
	val >>= 8;
	}
	}
	out:
	mutex_unlock(&vpd->lock);
	return ret ? ret : count;
	}

	static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count,
	const void *arg)
	{
	struct pci_vpd_pci22 *vpd =
	container_of(dev->vpd, struct pci_vpd_pci22, base);
	const u8 *buf = arg;
	loff_t end = pos + count;
	int ret = 0;

	if (pos < 0 \|\| (pos & 3) \|\| (count & 3) \|\| end > vpd->base.len)
	return -EINVAL;

	if (mutex_lock_killable(&vpd->lock))
	return -EINTR;

	ret = pci_vpd_pci22_wait(dev);
	if (ret < 0)
	goto out;

	while (pos < end) {
	u32 val;

	val = *buf++;
	val \|= *buf++ << 8;
	val \|= *buf++ << 16;
	val \|= *buf++ << 24;

	ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val);
	if (ret < 0)
	break;
	ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
	pos \| PCI_VPD_ADDR_F);
	if (ret < 0)
	break;

	vpd->busy = true;
	vpd->flag = 0;
	ret = pci_vpd_pci22_wait(dev);

	pos += sizeof(u32);
	}
	out:
	mutex_unlock(&vpd->lock);
	return ret ? ret : count;
	}

	static void pci_vpd_pci22_release(struct pci_dev *dev)
	{
	kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
	}

	static const struct pci_vpd_ops pci_vpd_pci22_ops = {
	.read = pci_vpd_pci22_read,
	.write = pci_vpd_pci22_write,
	.release = pci_vpd_pci22_release,
	};

	int pci_vpd_pci22_init(struct pci_dev *dev)
	{
	struct pci_vpd_pci22 *vpd;
	u8 cap;

	cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
	if (!cap)
	return -ENODEV;
	vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC);
	if (!vpd)
	return -ENOMEM;

	vpd->base.len = PCI_VPD_PCI22_SIZE;
	vpd->base.ops = &pci_vpd_pci22_ops;
	mutex_init(&vpd->lock);
	vpd->cap = cap;
	vpd->busy = false;
	dev->vpd = &vpd->base;
	return 0;
	}

	/**
	* pci_vpd_truncate - Set available Vital Product Data size
	* @dev: pci device struct
	* @size: available memory in bytes
	*
	* Adjust size of available VPD area.
	*/
	int pci_vpd_truncate(struct pci_dev *dev, size_t size)
	{
	if (!dev->vpd)
	return -EINVAL;

	/* limited by the access method */
	if (size > dev->vpd->len)
	return -EINVAL;

	dev->vpd->len = size;
	if (dev->vpd->attr)
	dev->vpd->attr->size = size;

	return 0;
	}
	EXPORT_SYMBOL(pci_vpd_truncate);

	/**
	* pci_block_user_cfg_access - Block userspace PCI config reads/writes
	* @dev: pci device struct
	*
	* When user access is blocked, any reads or writes to config space will
	* sleep until access is unblocked again. We don't allow nesting of
	* block/unblock calls.
	*/
	void pci_block_user_cfg_access(struct pci_dev *dev)
	{
	unsigned long flags;
	int was_blocked;

	spin_lock_irqsave(&pci_lock, flags);
	was_blocked = dev->block_ucfg_access;
	dev->block_ucfg_access = 1;
	spin_unlock_irqrestore(&pci_lock, flags);

	/* If we BUG() inside the pci_lock, we're guaranteed to hose
	* the machine */
	BUG_ON(was_blocked);
	}
	EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);

	/**
	* pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
	* @dev: pci device struct
	*
	* This function allows userspace PCI config accesses to resume.
	*/
	void pci_unblock_user_cfg_access(struct pci_dev *dev)
	{
	unsigned long flags;

	spin_lock_irqsave(&pci_lock, flags);

	/* This indicates a problem in the caller, but we don't need
	* to kill them, unlike a double-block above. */
	WARN_ON(!dev->block_ucfg_access);

	dev->block_ucfg_access = 0;
	wake_up_all(&pci_ucfg_wait);
	spin_unlock_irqrestore(&pci_lock, flags);
	}
	EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);