| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/topology.h> |
| #include <linux/cpu.h> |
| #include <linux/range.h> |
| |
| #include <asm/amd_nb.h> |
| #include <asm/pci_x86.h> |
| |
| #include <asm/pci-direct.h> |
| |
| #include "bus_numa.h" |
| |
| /* |
| * This discovers the pcibus <-> node mapping on AMD K8. |
| * also get peer root bus resource for io,mmio |
| */ |
| |
| struct pci_hostbridge_probe { |
| u32 bus; |
| u32 slot; |
| u32 vendor; |
| u32 device; |
| }; |
| |
| static struct pci_hostbridge_probe pci_probes[] __initdata = { |
| { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, |
| { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, |
| { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, |
| { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, |
| }; |
| |
| #define RANGE_NUM 16 |
| |
| static struct pci_root_info __init *find_pci_root_info(int node, int link) |
| { |
| struct pci_root_info *info; |
| |
| /* find the position */ |
| list_for_each_entry(info, &pci_root_infos, list) |
| if (info->node == node && info->link == link) |
| return info; |
| |
| return NULL; |
| } |
| |
| static void __init set_mp_bus_range_to_node(int min_bus, int max_bus, int node) |
| { |
| #ifdef CONFIG_NUMA |
| int j; |
| |
| for (j = min_bus; j <= max_bus; j++) |
| set_mp_bus_to_node(j, node); |
| #endif |
| } |
| /** |
| * early_fill_mp_bus_to_node() |
| * called before pcibios_scan_root and pci_scan_bus |
| * fills the mp_bus_to_cpumask array based according to the LDT Bus Number |
| * Registers found in the K8 northbridge |
| */ |
| static int __init early_fill_mp_bus_info(void) |
| { |
| int i; |
| unsigned bus; |
| unsigned slot; |
| int node; |
| int link; |
| int def_node; |
| int def_link; |
| struct pci_root_info *info; |
| u32 reg; |
| u64 start; |
| u64 end; |
| struct range range[RANGE_NUM]; |
| u64 val; |
| u32 address; |
| bool found; |
| struct resource fam10h_mmconf_res, *fam10h_mmconf; |
| u64 fam10h_mmconf_start; |
| u64 fam10h_mmconf_end; |
| |
| if (!early_pci_allowed()) |
| return -1; |
| |
| found = false; |
| for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { |
| u32 id; |
| u16 device; |
| u16 vendor; |
| |
| bus = pci_probes[i].bus; |
| slot = pci_probes[i].slot; |
| id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); |
| |
| vendor = id & 0xffff; |
| device = (id>>16) & 0xffff; |
| if (pci_probes[i].vendor == vendor && |
| pci_probes[i].device == device) { |
| found = true; |
| break; |
| } |
| } |
| |
| if (!found) |
| return 0; |
| |
| for (i = 0; i < 4; i++) { |
| int min_bus; |
| int max_bus; |
| reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); |
| |
| /* Check if that register is enabled for bus range */ |
| if ((reg & 7) != 3) |
| continue; |
| |
| min_bus = (reg >> 16) & 0xff; |
| max_bus = (reg >> 24) & 0xff; |
| node = (reg >> 4) & 0x07; |
| set_mp_bus_range_to_node(min_bus, max_bus, node); |
| link = (reg >> 8) & 0x03; |
| |
| info = alloc_pci_root_info(min_bus, max_bus, node, link); |
| } |
| |
| /* get the default node and link for left over res */ |
| reg = read_pci_config(bus, slot, 0, 0x60); |
| def_node = (reg >> 8) & 0x07; |
| reg = read_pci_config(bus, slot, 0, 0x64); |
| def_link = (reg >> 8) & 0x03; |
| |
| memset(range, 0, sizeof(range)); |
| add_range(range, RANGE_NUM, 0, 0, 0xffff + 1); |
| /* io port resource */ |
| for (i = 0; i < 4; i++) { |
| reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); |
| if (!(reg & 3)) |
| continue; |
| |
| start = reg & 0xfff000; |
| reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3)); |
| node = reg & 0x07; |
| link = (reg >> 4) & 0x03; |
| end = (reg & 0xfff000) | 0xfff; |
| |
| info = find_pci_root_info(node, link); |
| if (!info) |
| continue; /* not found */ |
| |
| printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", |
| node, link, start, end); |
| |
| /* kernel only handle 16 bit only */ |
| if (end > 0xffff) |
| end = 0xffff; |
| update_res(info, start, end, IORESOURCE_IO, 1); |
| subtract_range(range, RANGE_NUM, start, end + 1); |
| } |
| /* add left over io port range to def node/link, [0, 0xffff] */ |
| /* find the position */ |
| info = find_pci_root_info(def_node, def_link); |
| if (info) { |
| for (i = 0; i < RANGE_NUM; i++) { |
| if (!range[i].end) |
| continue; |
| |
| update_res(info, range[i].start, range[i].end - 1, |
| IORESOURCE_IO, 1); |
| } |
| } |
| |
| memset(range, 0, sizeof(range)); |
| /* 0xfd00000000-0xffffffffff for HT */ |
| end = cap_resource((0xfdULL<<32) - 1); |
| end++; |
| add_range(range, RANGE_NUM, 0, 0, end); |
| |
| /* need to take out [0, TOM) for RAM*/ |
| address = MSR_K8_TOP_MEM1; |
| rdmsrl(address, val); |
| end = (val & 0xffffff800000ULL); |
| printk(KERN_INFO "TOM: %016llx aka %lldM\n", end, end>>20); |
| if (end < (1ULL<<32)) |
| subtract_range(range, RANGE_NUM, 0, end); |
| |
| /* get mmconfig */ |
| fam10h_mmconf = amd_get_mmconfig_range(&fam10h_mmconf_res); |
| /* need to take out mmconf range */ |
| if (fam10h_mmconf) { |
| printk(KERN_DEBUG "Fam 10h mmconf %pR\n", fam10h_mmconf); |
| fam10h_mmconf_start = fam10h_mmconf->start; |
| fam10h_mmconf_end = fam10h_mmconf->end; |
| subtract_range(range, RANGE_NUM, fam10h_mmconf_start, |
| fam10h_mmconf_end + 1); |
| } else { |
| fam10h_mmconf_start = 0; |
| fam10h_mmconf_end = 0; |
| } |
| |
| /* mmio resource */ |
| for (i = 0; i < 8; i++) { |
| reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); |
| if (!(reg & 3)) |
| continue; |
| |
| start = reg & 0xffffff00; /* 39:16 on 31:8*/ |
| start <<= 8; |
| reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); |
| node = reg & 0x07; |
| link = (reg >> 4) & 0x03; |
| end = (reg & 0xffffff00); |
| end <<= 8; |
| end |= 0xffff; |
| |
| info = find_pci_root_info(node, link); |
| |
| if (!info) |
| continue; |
| |
| printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", |
| node, link, start, end); |
| /* |
| * some sick allocation would have range overlap with fam10h |
| * mmconf range, so need to update start and end. |
| */ |
| if (fam10h_mmconf_end) { |
| int changed = 0; |
| u64 endx = 0; |
| if (start >= fam10h_mmconf_start && |
| start <= fam10h_mmconf_end) { |
| start = fam10h_mmconf_end + 1; |
| changed = 1; |
| } |
| |
| if (end >= fam10h_mmconf_start && |
| end <= fam10h_mmconf_end) { |
| end = fam10h_mmconf_start - 1; |
| changed = 1; |
| } |
| |
| if (start < fam10h_mmconf_start && |
| end > fam10h_mmconf_end) { |
| /* we got a hole */ |
| endx = fam10h_mmconf_start - 1; |
| update_res(info, start, endx, IORESOURCE_MEM, 0); |
| subtract_range(range, RANGE_NUM, start, |
| endx + 1); |
| printk(KERN_CONT " ==> [%llx, %llx]", start, endx); |
| start = fam10h_mmconf_end + 1; |
| changed = 1; |
| } |
| if (changed) { |
| if (start <= end) { |
| printk(KERN_CONT " %s [%llx, %llx]", endx ? "and" : "==>", start, end); |
| } else { |
| printk(KERN_CONT "%s\n", endx?"":" ==> none"); |
| continue; |
| } |
| } |
| } |
| |
| update_res(info, cap_resource(start), cap_resource(end), |
| IORESOURCE_MEM, 1); |
| subtract_range(range, RANGE_NUM, start, end + 1); |
| printk(KERN_CONT "\n"); |
| } |
| |
| /* need to take out [4G, TOM2) for RAM*/ |
| /* SYS_CFG */ |
| address = MSR_K8_SYSCFG; |
| rdmsrl(address, val); |
| /* TOP_MEM2 is enabled? */ |
| if (val & (1<<21)) { |
| /* TOP_MEM2 */ |
| address = MSR_K8_TOP_MEM2; |
| rdmsrl(address, val); |
| end = (val & 0xffffff800000ULL); |
| printk(KERN_INFO "TOM2: %016llx aka %lldM\n", end, end>>20); |
| subtract_range(range, RANGE_NUM, 1ULL<<32, end); |
| } |
| |
| /* |
| * add left over mmio range to def node/link ? |
| * that is tricky, just record range in from start_min to 4G |
| */ |
| info = find_pci_root_info(def_node, def_link); |
| if (info) { |
| for (i = 0; i < RANGE_NUM; i++) { |
| if (!range[i].end) |
| continue; |
| |
| update_res(info, cap_resource(range[i].start), |
| cap_resource(range[i].end - 1), |
| IORESOURCE_MEM, 1); |
| } |
| } |
| |
| list_for_each_entry(info, &pci_root_infos, list) { |
| int busnum; |
| struct pci_root_res *root_res; |
| |
| busnum = info->busn.start; |
| printk(KERN_DEBUG "bus: %pR on node %x link %x\n", |
| &info->busn, info->node, info->link); |
| list_for_each_entry(root_res, &info->resources, list) |
| printk(KERN_DEBUG "bus: %02x %pR\n", |
| busnum, &root_res->res); |
| } |
| |
| return 0; |
| } |
| |
| #define ENABLE_CF8_EXT_CFG (1ULL << 46) |
| |
| static void __cpuinit enable_pci_io_ecs(void *unused) |
| { |
| u64 reg; |
| rdmsrl(MSR_AMD64_NB_CFG, reg); |
| if (!(reg & ENABLE_CF8_EXT_CFG)) { |
| reg |= ENABLE_CF8_EXT_CFG; |
| wrmsrl(MSR_AMD64_NB_CFG, reg); |
| } |
| } |
| |
| static int __cpuinit amd_cpu_notify(struct notifier_block *self, |
| unsigned long action, void *hcpu) |
| { |
| int cpu = (long)hcpu; |
| switch (action) { |
| case CPU_ONLINE: |
| case CPU_ONLINE_FROZEN: |
| smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0); |
| break; |
| default: |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block __cpuinitdata amd_cpu_notifier = { |
| .notifier_call = amd_cpu_notify, |
| }; |
| |
| static void __init pci_enable_pci_io_ecs(void) |
| { |
| #ifdef CONFIG_AMD_NB |
| unsigned int i, n; |
| |
| for (n = i = 0; !n && amd_nb_bus_dev_ranges[i].dev_limit; ++i) { |
| u8 bus = amd_nb_bus_dev_ranges[i].bus; |
| u8 slot = amd_nb_bus_dev_ranges[i].dev_base; |
| u8 limit = amd_nb_bus_dev_ranges[i].dev_limit; |
| |
| for (; slot < limit; ++slot) { |
| u32 val = read_pci_config(bus, slot, 3, 0); |
| |
| if (!early_is_amd_nb(val)) |
| continue; |
| |
| val = read_pci_config(bus, slot, 3, 0x8c); |
| if (!(val & (ENABLE_CF8_EXT_CFG >> 32))) { |
| val |= ENABLE_CF8_EXT_CFG >> 32; |
| write_pci_config(bus, slot, 3, 0x8c, val); |
| } |
| ++n; |
| } |
| } |
| #endif |
| } |
| |
| static int __init pci_io_ecs_init(void) |
| { |
| int cpu; |
| |
| /* assume all cpus from fam10h have IO ECS */ |
| if (boot_cpu_data.x86 < 0x10) |
| return 0; |
| |
| /* Try the PCI method first. */ |
| if (early_pci_allowed()) |
| pci_enable_pci_io_ecs(); |
| |
| register_cpu_notifier(&amd_cpu_notifier); |
| for_each_online_cpu(cpu) |
| amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE, |
| (void *)(long)cpu); |
| pci_probe |= PCI_HAS_IO_ECS; |
| |
| return 0; |
| } |
| |
| static int __init amd_postcore_init(void) |
| { |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) |
| return 0; |
| |
| early_fill_mp_bus_info(); |
| pci_io_ecs_init(); |
| |
| return 0; |
| } |
| |
| postcore_initcall(amd_postcore_init); |