| /* $Id: bbc.h,v 1.2 2001/03/26 23:47:18 davem Exp $ |
| * bbc.h: Defines for BootBus Controller found on UltraSPARC-III |
| * systems. |
| * |
| * Copyright (C) 2000 David S. Miller (davem@redhat.com) |
| */ |
| |
| #ifndef _SPARC64_BBC_H |
| #define _SPARC64_BBC_H |
| |
| /* Register sizes are indicated by "B" (Byte, 1-byte), |
| * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or |
| * "Q" (Quad, 8 bytes) inside brackets. |
| */ |
| |
| #define BBC_AID 0x00 /* [B] Agent ID */ |
| #define BBC_DEVP 0x01 /* [B] Device Present */ |
| #define BBC_ARB 0x02 /* [B] Arbitration */ |
| #define BBC_QUIESCE 0x03 /* [B] Quiesce */ |
| #define BBC_WDACTION 0x04 /* [B] Watchdog Action */ |
| #define BBC_SPG 0x06 /* [B] Soft POR Gen */ |
| #define BBC_SXG 0x07 /* [B] Soft XIR Gen */ |
| #define BBC_PSRC 0x08 /* [W] POR Source */ |
| #define BBC_XSRC 0x0c /* [B] XIR Source */ |
| #define BBC_CSC 0x0d /* [B] Clock Synthesizers Control*/ |
| #define BBC_ES_CTRL 0x0e /* [H] Energy Star Control */ |
| #define BBC_ES_ACT 0x10 /* [W] E* Assert Change Time */ |
| #define BBC_ES_DACT 0x14 /* [B] E* De-Assert Change Time */ |
| #define BBC_ES_DABT 0x15 /* [B] E* De-Assert Bypass Time */ |
| #define BBC_ES_ABT 0x16 /* [H] E* Assert Bypass Time */ |
| #define BBC_ES_PST 0x18 /* [W] E* PLL Settle Time */ |
| #define BBC_ES_FSL 0x1c /* [W] E* Frequency Switch Latency*/ |
| #define BBC_EBUST 0x20 /* [Q] EBUS Timing */ |
| #define BBC_JTAG_CMD 0x28 /* [W] JTAG+ Command */ |
| #define BBC_JTAG_CTRL 0x2c /* [B] JTAG+ Control */ |
| #define BBC_I2C_SEL 0x2d /* [B] I2C Selection */ |
| #define BBC_I2C_0_S1 0x2e /* [B] I2C ctrlr-0 reg S1 */ |
| #define BBC_I2C_0_S0 0x2f /* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/ |
| #define BBC_I2C_1_S1 0x30 /* [B] I2C ctrlr-1 reg S1 */ |
| #define BBC_I2C_1_S0 0x31 /* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/ |
| #define BBC_KBD_BEEP 0x32 /* [B] Keyboard Beep */ |
| #define BBC_KBD_BCNT 0x34 /* [W] Keyboard Beep Counter */ |
| |
| #define BBC_REGS_SIZE 0x40 |
| |
| /* There is a 2K scratch ram area at offset 0x80000 but I doubt |
| * we will use it for anything. |
| */ |
| |
| /* Agent ID register. This register shows the Safari Agent ID |
| * for the processors. The value returned depends upon which |
| * cpu is reading the register. |
| */ |
| #define BBC_AID_ID 0x07 /* Safari ID */ |
| #define BBC_AID_RESV 0xf8 /* Reserved */ |
| |
| /* Device Present register. One can determine which cpus are actually |
| * present in the machine by interrogating this register. |
| */ |
| #define BBC_DEVP_CPU0 0x01 /* Processor 0 present */ |
| #define BBC_DEVP_CPU1 0x02 /* Processor 1 present */ |
| #define BBC_DEVP_CPU2 0x04 /* Processor 2 present */ |
| #define BBC_DEVP_CPU3 0x08 /* Processor 3 present */ |
| #define BBC_DEVP_RESV 0xf0 /* Reserved */ |
| |
| /* Arbitration register. This register is used to block access to |
| * the BBC from a particular cpu. |
| */ |
| #define BBC_ARB_CPU0 0x01 /* Enable cpu 0 BBC arbitratrion */ |
| #define BBC_ARB_CPU1 0x02 /* Enable cpu 1 BBC arbitratrion */ |
| #define BBC_ARB_CPU2 0x04 /* Enable cpu 2 BBC arbitratrion */ |
| #define BBC_ARB_CPU3 0x08 /* Enable cpu 3 BBC arbitratrion */ |
| #define BBC_ARB_RESV 0xf0 /* Reserved */ |
| |
| /* Quiesce register. Bus and BBC segments for cpus can be disabled |
| * with this register, ie. for hot plugging. |
| */ |
| #define BBC_QUIESCE_S02 0x01 /* Quiesce Safari segment for cpu 0 and 2 */ |
| #define BBC_QUIESCE_S13 0x02 /* Quiesce Safari segment for cpu 1 and 3 */ |
| #define BBC_QUIESCE_B02 0x04 /* Quiesce BBC segment for cpu 0 and 2 */ |
| #define BBC_QUIESCE_B13 0x08 /* Quiesce BBC segment for cpu 1 and 3 */ |
| #define BBC_QUIESCE_FD0 0x10 /* Disable Fatal_Error[0] reporting */ |
| #define BBC_QUIESCE_FD1 0x20 /* Disable Fatal_Error[1] reporting */ |
| #define BBC_QUIESCE_FD2 0x40 /* Disable Fatal_Error[2] reporting */ |
| #define BBC_QUIESCE_FD3 0x80 /* Disable Fatal_Error[3] reporting */ |
| |
| /* Watchdog Action register. When the watchdog device timer expires |
| * a line is enabled to the BBC. The action BBC takes when this line |
| * is asserted can be controlled by this regiser. |
| */ |
| #define BBC_WDACTION_RST 0x01 /* When set, watchdog causes system reset. |
| * When clear, BBC ignores watchdog signal. |
| */ |
| #define BBC_WDACTION_RESV 0xfe /* Reserved */ |
| |
| /* Soft_POR_GEN register. The POR (Power On Reset) signal may be asserted |
| * for specific processors or all processors via this register. |
| */ |
| #define BBC_SPG_CPU0 0x01 /* Assert POR for processor 0 */ |
| #define BBC_SPG_CPU1 0x02 /* Assert POR for processor 1 */ |
| #define BBC_SPG_CPU2 0x04 /* Assert POR for processor 2 */ |
| #define BBC_SPG_CPU3 0x08 /* Assert POR for processor 3 */ |
| #define BBC_SPG_CPUALL 0x10 /* Reset all processors and reset |
| * the entire system. |
| */ |
| #define BBC_SPG_RESV 0xe0 /* Reserved */ |
| |
| /* Soft_XIR_GEN register. The XIR (eXternally Initiated Reset) signal |
| * may be asserted to specific processors via this register. |
| */ |
| #define BBC_SXG_CPU0 0x01 /* Assert XIR for processor 0 */ |
| #define BBC_SXG_CPU1 0x02 /* Assert XIR for processor 1 */ |
| #define BBC_SXG_CPU2 0x04 /* Assert XIR for processor 2 */ |
| #define BBC_SXG_CPU3 0x08 /* Assert XIR for processor 3 */ |
| #define BBC_SXG_RESV 0xf0 /* Reserved */ |
| |
| /* POR Source register. One may identify the cause of the most recent |
| * reset by reading this register. |
| */ |
| #define BBC_PSRC_SPG0 0x0001 /* CPU 0 reset via BBC_SPG register */ |
| #define BBC_PSRC_SPG1 0x0002 /* CPU 1 reset via BBC_SPG register */ |
| #define BBC_PSRC_SPG2 0x0004 /* CPU 2 reset via BBC_SPG register */ |
| #define BBC_PSRC_SPG3 0x0008 /* CPU 3 reset via BBC_SPG register */ |
| #define BBC_PSRC_SPGSYS 0x0010 /* System reset via BBC_SPG register */ |
| #define BBC_PSRC_JTAG 0x0020 /* System reset via JTAG+ */ |
| #define BBC_PSRC_BUTTON 0x0040 /* System reset via push-button dongle */ |
| #define BBC_PSRC_PWRUP 0x0080 /* System reset via power-up */ |
| #define BBC_PSRC_FE0 0x0100 /* CPU 0 reported Fatal_Error */ |
| #define BBC_PSRC_FE1 0x0200 /* CPU 1 reported Fatal_Error */ |
| #define BBC_PSRC_FE2 0x0400 /* CPU 2 reported Fatal_Error */ |
| #define BBC_PSRC_FE3 0x0800 /* CPU 3 reported Fatal_Error */ |
| #define BBC_PSRC_FE4 0x1000 /* Schizo reported Fatal_Error */ |
| #define BBC_PSRC_FE5 0x2000 /* Safari device 5 reported Fatal_Error */ |
| #define BBC_PSRC_FE6 0x4000 /* CPMS reported Fatal_Error */ |
| #define BBC_PSRC_SYNTH 0x8000 /* System reset when on-board clock synthesizers |
| * were updated. |
| */ |
| #define BBC_PSRC_WDT 0x10000 /* System reset via Super I/O watchdog */ |
| #define BBC_PSRC_RSC 0x20000 /* System reset via RSC remote monitoring |
| * device |
| */ |
| |
| /* XIR Source register. The source of an XIR event sent to a processor may |
| * be determined via this register. |
| */ |
| #define BBC_XSRC_SXG0 0x01 /* CPU 0 received XIR via Soft_XIR_GEN reg */ |
| #define BBC_XSRC_SXG1 0x02 /* CPU 1 received XIR via Soft_XIR_GEN reg */ |
| #define BBC_XSRC_SXG2 0x04 /* CPU 2 received XIR via Soft_XIR_GEN reg */ |
| #define BBC_XSRC_SXG3 0x08 /* CPU 3 received XIR via Soft_XIR_GEN reg */ |
| #define BBC_XSRC_JTAG 0x10 /* All CPUs received XIR via JTAG+ */ |
| #define BBC_XSRC_W_OR_B 0x20 /* All CPUs received XIR either because: |
| * a) Super I/O watchdog fired, or |
| * b) XIR push button was activated |
| */ |
| #define BBC_XSRC_RESV 0xc0 /* Reserved */ |
| |
| /* Clock Synthesizers Control register. This register provides the big-bang |
| * programming interface to the two clock synthesizers of the machine. |
| */ |
| #define BBC_CSC_SLOAD 0x01 /* Directly connected to S_LOAD pins */ |
| #define BBC_CSC_SDATA 0x02 /* Directly connected to S_DATA pins */ |
| #define BBC_CSC_SCLOCK 0x04 /* Directly connected to S_CLOCK pins */ |
| #define BBC_CSC_RESV 0x78 /* Reserved */ |
| #define BBC_CSC_RST 0x80 /* Generate system reset when S_LOAD==1 */ |
| |
| /* Energy Star Control register. This register is used to generate the |
| * clock frequency change trigger to the main system devices (Schizo and |
| * the processors). The transition occurs when bits in this register |
| * go from 0 to 1, only one bit must be set at once else no action |
| * occurs. Basically the sequence of events is: |
| * a) Choose new frequency: full, 1/2 or 1/32 |
| * b) Program this desired frequency into the cpus and Schizo. |
| * c) Set the same value in this register. |
| * d) 16 system clocks later, clear this register. |
| */ |
| #define BBC_ES_CTRL_1_1 0x01 /* Full frequency */ |
| #define BBC_ES_CTRL_1_2 0x02 /* 1/2 frequency */ |
| #define BBC_ES_CTRL_1_32 0x20 /* 1/32 frequency */ |
| #define BBC_ES_RESV 0xdc /* Reserved */ |
| |
| /* Energy Star Assert Change Time register. This determines the number |
| * of BBC clock cycles (which is half the system frequency) between |
| * the detection of FREEZE_ACK being asserted and the assertion of |
| * the CLK_CHANGE_L[2:0] signals. |
| */ |
| #define BBC_ES_ACT_VAL 0xff |
| |
| /* Energy Star Assert Bypass Time register. This determines the number |
| * of BBC clock cycles (which is half the system frequency) between |
| * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of |
| * the ESTAR_PLL_BYPASS signal. |
| */ |
| #define BBC_ES_ABT_VAL 0xffff |
| |
| /* Energy Star PLL Settle Time register. This determines the number of |
| * BBC clock cycles (which is half the system frequency) between the |
| * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L |
| * signal. |
| */ |
| #define BBC_ES_PST_VAL 0xffffffff |
| |
| /* Energy Star Frequency Switch Latency register. This is the number of |
| * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first |
| * edge of the Safari clock at the new frequency. |
| */ |
| #define BBC_ES_FSL_VAL 0xffffffff |
| |
| /* Keyboard Beep control register. This is a simple enabler for the audio |
| * beep sound. |
| */ |
| #define BBC_KBD_BEEP_ENABLE 0x01 /* Enable beep */ |
| #define BBC_KBD_BEEP_RESV 0xfe /* Reserved */ |
| |
| /* Keyboard Beep Counter register. There is a free-running counter inside |
| * the BBC which runs at half the system clock. The bit set in this register |
| * determines when the audio sound is generated. So for example if bit |
| * 10 is set, the audio beep will oscillate at 1/(2**12). The keyboard beep |
| * generator automatically selects a different bit to use if the system clock |
| * is changed via Energy Star. |
| */ |
| #define BBC_KBD_BCNT_BITS 0x0007fc00 |
| #define BBC_KBC_BCNT_RESV 0xfff803ff |
| |
| #endif /* _SPARC64_BBC_H */ |
| |